首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The late Triassic Baolun gold deposit hosted by Silurian phyllites is a large‐scale high‐grade gold deposit in Hainan Island, South China. The ores can be classified into quartz‐vein dominated type and less altered rock type. Three mineralization stages were recognized by mineral assemblages. The early stage, as the most important mineralization stage, is characterized by a quartz–native gold assemblage. The muscovite?quartz?pyrite?native gold assemblage is related to the intermedium mineralization stage. In late mineralization stage, native gold and Bi‐bearing minerals are paragenetic minerals. Microthermometry analyses show that the early mineralization stage is characterized by two types of fluid inclusions, including CO2‐rich inclusions (C‐type) and aqueous inclusions (W‐type). C‐type inclusions homogenize at 276–335°C with an averaged value of 306°C and have salinities of 1.0–10.0 wt% NaCl equivalent (mean value of 4.9 wt% NaCl equivalent). W‐type inclusions homogenize at 252–301°C (mean value of 278°C) with salinity of 4.0–9.7 wt% NaCl equivalent (mean value of 7.4 wt% NaCl equivalent). In intermedium mineralization stage, C‐type and W‐type inclusions homogenize at 228–320°C (mean value of 283°C) and 178–296°C (mean value of 241°C), with salinities of 2.4–9.9 wt% NaCl equivalent (mean value of 6.5 wt% NaCl equivalent) and 3.7–11.7 wt% NaCl equivalent (mean value of 7.7 wt% NaCl equivalent), respectively. No suitable mineral, such as quartz or calcite, was found for fluid inclusion study from late mineralization stage. In contrast, only aqueous inclusions were found from post‐ore barren veins, which yielded lower homogenization temperatures ranging from 168–241°C (mean value of 195°C) and similar salinities (2.6–12.6 wt% NaCl equivalent with averaged value of 7.2 wt% NaCl equivalent). The different homogenization temperatures and similar salinities of C‐type and W‐type from each mineralization stage indicate that fluid immiscibility and boiling occurred. The Baolun gold deposit was precipitated from a CO2‐bearing mesothermal fluid, and formed at a syn‐collision environment following the closure of the Paleo‐Tethys.  相似文献   

2.
Located in Alxa Zuoqi (Left Banner) of Inner Mongolia, China, the Zhulazhaga gold deposit is the first largescale gold deposit that was found in the middle-upper Proterozoic strata along the north margin of the North China craton in recent years. It was discovered by the No. l Geophysical and Geochemical Exploration Party of Inner Mongolia as a result of prospecting a geochemical anomaly. By now, over 50 tonnes of gold has been defined, with an average Au grade of 4 g/t. The ore bodies occur in the first lithological unit of the Mesoproterozoic Zhulazhagamaodao Formation (MZF), which is composed mainly of epimetamorphic sandstone and siltstone and partly of volcanic rocks. With high concentration of gold,the first lithological unit of the MZF became the source bed for the late-stage ore formation. Controlled by the interstratal fracture zones, the ore bodies mostly appear along the bedding with occurrence similar to that of the strata. The primitiveore types are predominantly the altered rock type with minor ore belonging to the quartz veins type. There are also some oxidized ore near the surface. The metallic minerals are composed mainly of pyrite, pyrrhotite and arsenopyrite with minor chalcopyrite, galena and limonite. Most gold minerals appear as native gold and electrum. Hydrothermal alterations associated with the ore formation are actinolitization, silicatization, sulfidation and carbonation. A total of 100 two-phase H2O-rich and 7 three-phase daughter crystal-beating inclusions were measured in seven goldbearing quartz samples from the Zhulazhaga gold deposit. The homogenization temperatures of the two-phase H2O-rich inclusions range from 155 to 401℃, with an average temperature of 284℃ and bimodal distributions from 240 to 260℃ and 300 to 320℃ respectively. The salinities of the two-phase H2O-rich inclusions vary from 9.22wt% to 24.30wt% NaCl eqniv, with a mode between 23 wt% and 24wt% NaC1 equiv. Comparatively, the homogenization temperatures of the threephase daughter crystal-beating inclusions vary from 210 to 435℃ and the salinities from 29.13wt% to 32.62wt% NaCl equiv. It indicates that the ore-forming fluid is meso-hypothermal and characterized by high salinity, which is apparently different from the metamorphic origin with low salinity. It suggests a magmatic origin of the gold-bearing fluid. The δ^18O values of quartz from auriferous veins range from 11.9 to 16.3 per mil, and the calculated δ^18OH2O values in equilibrium with quartz vary from 1.06 to 9.60 per mil, which fall between the values of meteoric water and magmatic water. It reflects that the ore-forming fluid may be the product of mixing of meteoric water and magmatic water.Based on geological and geochemical studies of the Zhulazhaga gold deposit, it is supposed that the volcanism in the Mesoproterozoic might make gold pre-concentrate in the strata. The extensive and intensive Hercynian tectono-magmatic activity not only brought along a large number of ore-forming materials, but also made the gold from the strata rework. It can be concluded that the ore bodies were mainly formed in late hydrothermal reworking stage. Compared with typical gold deposits associated with epimetamorphic clastic rocks, the Zhulazhaga deposit has similar features in occurrence of ore bodies, ore-controlling structure, wall-rock alterations and mineral assemblages. Therefore, the Zhulazhaga gold deposit belongs to the epimetamorphic clastic rock type.  相似文献   

3.
内蒙古白乃庙矿田十四万金矿床流体包裹体研究   总被引：1，自引：1，他引：0  
钟日晨  李文博 《岩石学报》2009,25(11):2973-2982
十四万金矿床是白乃庙矿田徐尼乌苏金矿化带内重要的石英脉型金矿,矿体产于EW向韧性剪切带的次级NE向断裂.成矿过程划分为3个阶段:早阶段形成无矿石英脉,石英遭受明显压应力作用,包裹体类型包括富水溶液型、富碳质型、纯碳质型,包裹体均一温度为260～420℃,平均盐度6.78%NaCl eqv;中阶段为硫化物-方解石-绿泥石-绢云母-细粒石英组合,充填早阶段石英的裂隙,未遭受明显应力作用,包裹体类型为富水溶液型和纯碳质型,包裹体均一温度为140～260℃,平均盐度7.22%NaCl eqv;晚阶段形成方解石脉,仅有富水溶液型包裹体,包裹体均一温度为140～180℃,平均盐度2.15%NaCl eqv.激光拉曼测试结果表明包裹体气相成份主要为CO_2、CH_4和少量N2.早阶段成矿流体为富碳质流体,成分为CH_4+CO_2+H_2O,中阶段流体为富水流体,成分为H_2O+CH_4,早、中阶段均发生了流体沸腾作用,早阶段强烈的沸腾作用使流体CO_2和CH_4含量降低,中阶段方解石沉淀使CO_2含量进一步降低,并导致了硫化物沉淀和金矿化.十四万金矿床流体包裹体特征、矿床地质特征均与造山型矿床一致,为造山型金矿,成矿流体可能源于徐尼乌苏组浅变质作用产生的变质流体,成矿构造背景可能为二叠纪末-三叠纪初华北板块与西伯利亚板块间的陆陆碰撞造山体制.  相似文献   

4.
The Sibutad gold deposit has gold associated in quartz veins. The most important of these is the Lalab orebody, which contains ore‐grade gold, predominantly, in milky quartz veins and veinlets. Here, alteration quartz and fine‐grained crystalline clear and milky quartz were formed from hydrothermal fluids in three stages, namely stages I, II and III. Fluid inclusion microthermometry was carried out on stage I milky quartz, stage II fine‐grained alteration quartz and stage III milky quartz ± barite veins and veinlets. Homogenization temperatures (TH) are >248°C in stage I, 214–232°C in stage II and 186–239°C in stage III. These fluid inclusions have salinity between 1 and 2 wt% NaCl equivalent. In terms of gold assay, stage I drill‐core samples have gold grades 0.53–0.76 g/ton Au, stage II samples have 1.12–3.70 g/ton Au and stage III samples have 9.06–23.88 g/ton Au. This correlation suggests that gold was precipitated from the stage II and III fluids.  相似文献   

5.
The Sawayaerdun gold deposit, located in Wuqia County, Southwest Tianshan, China, occurs in Upper Silurian and Lower Devonian low‐grade metamorphic carbonaceous turbidites. The orebodies are controlled by a series of NE‐NNE‐trending, brittle–ductile shear zones. Twenty‐four gold mineralized zones have been recognized in the Sawayaerdun ore deposit. Among these, the up to 4‐km‐long and 200‐m wide No. IV mineralized zone is economically the most important. The average gold grade is 1–6 g/t. Gold reserves of the Sawayaerdun deposit have been identified at approximately 37 tonnes and an inferred resource of 123 tonnes. Hydrothermal alteration is characterized by silicification, pyritization, arsenopyritization, sericitization, carbonatization and chloritization. On the basis of field evidence and petrographic analysis, five stages of vein emplacement and hydrothermal mineralization can be distinguished: stage 1, early quartz stage, characterized by the occurrence of quartz veins; stage 2, arsenopyrite–pyrite–quartz stage, characterized by the formation of auriferous quartz veinlets and stockworks; stage 3, polymetallic sulfide quartz stage, characterized by the presence of auriferous polymetallic sulfide quartz veinlets and stockworks; stage 4, antimony–quartz stage, characterized by the formation of stibnite–jamesonite quartz veins; and stage 5, quartz–carbonate vein stage. Stages 2 and 3 represent the main gold mineralization, with stage 4 representing a major antimony mineralization episode in the Sawayaerdun deposit. Two types of fluid inclusion, namely H2O–NaCl and H2O–CO2–NaCl types, have been recognized in quartz and calcite. Aqueous inclusions show a wide range of homogenization temperatures from 125 to 340°C, and can be correlated with the mineralization stage during which the inclusions formed. Similarly, salinities and densities of these fluids range for each stage of mineralization from 2.57 to 22 equivalent wt% NaCl and 0.76 to 1.05 g/cm3, respectively. The ore‐forming fluids thus are representative of a medium‐ to low‐temperature, low‐ to medium‐salinity H2O–NaCl–CO2–CH4–N2 system. The δ34SCDT values of sulfides associated with mineralization fall into a narrow range of ?3.0 to +2.6‰ with a mean of +0.1‰. The δ13CPDB values of dolomite and siderite from the Sawayaerdun gold deposit range from ?5.4 to ?0.6‰, possibly reflecting derivation of the carbonate carbon from a mixed magmatic/sedimentary source. Changes in physico‐chemical conditions and composition of the hydrothermal fluids, water–rock exchange and immiscibility of hydrothermal fluids are inferred to have played important roles in the ore‐forming process of the Sawayaerdun gold–antimony deposit.  相似文献   

6.
The Dayingezhuang gold deposit, hosted mainly by Late Jurassic granitoids on Jiaodong Peninsula in eastern China, contains an estimated 170 t of gold and is one of the largest deposits within the Zhaoping fracture zone. The orebodies consist of auriferous altered pyrite–sericite–quartz granites that show Jiaojia-type (i.e., disseminated and veinlet) mineralization. Mineralization and alteration are structurally controlled by the NE- to NNE-striking Linglong detachment fault. The mineralization can be divided into four stages: (K-feldspar)–pyrite–sericite–quartz, quartz–gold–pyrite, quartz–gold–polymetallic sulfide, and quartz–carbonate, with the majority of the gold being produced in the second and third stages. Based on a combination of petrography, microthermometry, and laser Raman spectroscopy, three types of fluid inclusion were identified in the vein minerals: NaCl–H2O (A-type), CO2–H2O–NaCl (AC-type), and pure CO2 (PC-type). Quartz crystals in veinlets that formed during the first stage contain mainly AC-type fluid inclusions, with rare PC-type inclusions. These fluid inclusions homogenize at temperatures of 251°C–403°C and have low salinities of 2.2–9.4 wt% NaCl equivalent. Quartz crystals that formed in the second and third stages contain all three types of fluid inclusions, with total homogenization temperatures of 216°C–339°C and salinities of 1.8–13.8 wt% NaCl equivalent for the second stage and homogenization temperatures of 195°C–321°C and salinities of 1.4–13.3 wt% NaCl equivalent for the third stage. In contrast, quartz crystals that formed in the fourth stage contains mainly A-type fluid inclusions, with minor occurrences of AC-type inclusions; these inclusions have homogenization temperatures of 106°C–287°C and salinities of 0.5–7.7 wt% NaCl equivalent. Gold in the ore-forming fluids may have changed from Au(HS)0 as the dominant species under acidic conditions and at relatively high temperatures and fO2 in the early stages, to Au(HS)2– under neutral-pH conditions at lower temperatures and fO2 in the later stages. The precipitation of gold and other metals is inferred to be caused by a combination of fluid immiscibility and water–rock interaction.  相似文献   

7.
The Bilimoia deposit (2.23 Mt, 24 g/t Au), located in the eastern Central Mobile Belt of mainland Papua New Guinea, is composed of fault‐hosted, NW–NNW‐trending Irumafimpa–Kora and Judd–Upper Kora Au‐quartz veins hosted by Middle–Late Triassic basement that was metamorphosed to medium‐grade greenschist facies between Middle–Late Triassic and Early–Middle Jurassic. Mineralizing fluids were introduced during crustal thickening, rapid uplift, change of plate motions from oblique to orthogonal compression, active faulting and S3 and S4 events in an S1–S4 deformation sequence. The Bilimoia deposit is spatially and temporally related to I‐type, early intermediate to felsic and late mafic intrusions emplaced in Late Miocene (9–7 Ma). Hydrothermal alteration and associated mineralization is divided into 10 main paragenetic stages: (1) chlorite–epidote‐selvaged quartz–calcite–specularite vein; (2) local quartz–illite–pyrite alteration; (3) quartz–sericite–mariposite–fuchsite–pyrite wall‐rock alteration that delimits the bounding shears; (4) finely banded, colloform‐, crustiform‐ and cockade‐textured and drusy quartz ± early wolframite ± late adularia; (5) hematite; (6) pyrite; (7) quartz ± amethyst‐base metal sulfides; (8) quartz–chalcopyrite–bornite–Sn and Cu sulfides–Au tellurides and Te ± Bi ± Ag ± Cu ± Pb phases; (9) Fe ± Mn carbonates; and (10) supergene overprint. Fluid inclusions in stage 4 are characterized by low salinity (0.9–5.4 wt% NaCl equivalent), aqueous–carbonic fluids with total homogenization temperatures ranging from 210 to 330°C. Some of the inclusions that homogenized between 285 and 330°C host coexisting liquid‐ and vapor‐rich (including carbonic) phases, suggesting phase separation. Fluid inclusions in quartz intergrown with wolframite have low salinity (0.9–1.2 wt% NaCl equivalent), aqueous–carbonic fluids at 240–260°C, defining the latter’s depositional conditions. The ore fluids were derived from oxidized magmatic source initially contaminated by reduced basement rocks. Wall‐rock alteration and involvement of circulating meteoric waters were dominant during the first three stages and early part of stage 4. Stage 5 hematite was deposited as a result of stage 4 phase separation or entrainment of oxygenated groundwater. Gold is associated with Te‐ and Bi‐bearing minerals and mostly precipitated as gold‐tellurides during stage 8. Gold deposition occurred below 350°C due to a change in the sulfidation and oxidation state of the fluids, depressurization and decreasing temperature and activities of sulfur and tellurium. Bisulfides are considered to be the main Au‐transporting complexes. The Bilimoia deposit has affinities that are similar to many gold systems termed epizonal orogenic and intrusion‐related. The current data allow us to classify the Bilimoia deposit as a fault‐controlled, metamorphic‐hosted, intrusion‐related mesothermal to low sulfidation epithermal quartz–Au–Te–Bi vein system.  相似文献   

8.
Abstract: The Wenyu mesothermal gold deposit is located in the Xiaoqinling district about 1000 km southwest of Beijing in central China. It occurs in the Late Archean to Early Proterozoic metamorphosed volcanic and sedimentary rocks. Three distinct stages of veins have been identified: (I) gold‐poor quartz–pyrite veins, (II) gold‐rich sulfide–quartz veins, and (III) gold‐poor carbonate–quartz veins. Stage II can be subdivided into IIa and IIb. Gold typically occurs as fracture‐fillings associated with chalcopyrite and galena. Fluid inclusions were examined in quartz samples from veins of both stage I and II. Three types of fluid inclusions are identified: CO2–H2O, CO2–rich, and aqueous inclusions. The first two types are of primary in origin. The last type occurs in two ways: coexisting with CO2–H2O and CO2–rich inclusions and thus primary in origin; and occurring along late healed fractures and hence secondary in origin. CO2–H2O inclusions display progressively decreasing Th and increasing Thco2, from the highest Th (311–408C) and lowest Thco2 (average 18C) in stage I quartz through middle Th (284–358C) and ThCO2(average 25C) in stage IIa quartz to the lowest Th (275–314C) and highest ThCO2 (average 28C) in stage IIb quartz, indicating an evolving H2O–CO2–NaCl fluid system. CO2–rich and primary aqueous inclusions show consistent ThCO2 or Th with their coexistent CO2–H2O inclusions. Whereas the secondary aqueous inclusions in stage I and IIa quartz have almost the same Th and salinity as the primary aqueous inclusions in stage IIb quartz. Comparing with CO2–H2O inclusions, these non–CO2, low salinity aqueous inclusions may come from different origin, most probably meteoric water. Unlike in both stage I and IIa quartz, fluid inclusions in stage IIb do not show evidence of fluid immiscibility. The fact that most of gold is associated with stage IIa and IIb veins and not with veins of stage I which is the main stage of vein formation suggests that gold deposition occurs at the later stage of fluid immiscibility. The continuing phase separation led to the deposition of large amounts of gold at the Wenyu mine.  相似文献   

9.
The Chehugou Mo–Cu deposit, located 56 km west of Chifeng, NE China, is hosted by Triassic granite porphyry. Molybdenite–chalcopyrite mineralization of the deposit mainly occurs as veinlets in stockwork ore and dissemination in breccia ore, and two ore‐bearing quartz veins crop out to the south of the granite porphyry stock. Based on crosscutting relationships and mineral paragenesis, three hydrothermal stages are identified: (i) quartz–pyrite–molybdenite ± chalcopyrite stage; (ii) pyrite–quartz ± sphalerite stage; and (iii) quartz–calcite ± pyrite ± fluorite stage. Three types of fluid inclusions in the stockwork and breccia ore are recognized: LV, two‐phase aqueous inclusions (liquid‐rich); LVS, three‐phase liquid, vapor, and salt daughter crystal inclusions; and VL, two‐phase aqueous inclusions (gas‐rich). LV and LVS fluid inclusions are recognized in vein ore. Microthermometric investigation of the three types of fluid inclusions in hydrothermal quartz from the stockwork, breccia, and vein ores shows salinities from 1.57 to 66.75 wt% NaCl equivalents, with homogenization temperatures varying from 114°C to 550°C. The temperature changed from 282–550°C, 220–318°C to 114–243°C from the first stage to the third stage. The homogenization temperatures and salinity of the LV, LVS and VL inclusions are 114–442°C and 1.57–14.25 wt% NaCl equivalent, 301–550°C and 31.01–66.75 wt% NaCl equivalent, 286–420°C and 4.65–11.1 wt% NaCl equivalent, respectively. The VL inclusions coexist with the LV and LVS, which homogenize at the similar temperature. The above evidence shows that fluid‐boiling occurred in the ore‐forming stage. δ34S values of sulfide from three type ores change from ?0.61‰ to 0.86‰. These δ34S values of sulfide are similar to δ34S values of typical magmatic sulfide sulfur (c. 0‰), suggesting that ore‐forming materials are magmatic in origin.  相似文献   

10.
在成矿地质背景和矿床地质特征研究基础上,对大金沟金矿主矿体中含矿石英脉流体包裹体开展了系统的岩相观察和显微测温工作。结果表明:大金沟金矿含矿石英脉中主要发育富液相的气液两相包裹体,偶见纯液相或气相包裹体。这些包裹体可分为低温高盐度(75℃~121℃,16.71 wt%NaCl~19.68 wt%NaCl)、低温低盐度(100℃~172℃,0.7 wt%NaCl~5.71 wt%NaCl)、中低温中低盐度(75℃~253℃,6.16 wt%NaCl~12.51 wt%NaCl)和高温中低盐度(331℃~420℃,4.96 wt%NaCl~12.51 wt%NaCl)等4类。大金沟金矿主成矿期流体包裹体的均一温度(75℃~253℃)和盐度(0.7 wt%NaCl~19.68 wt%NaCl)变化较大,且两者的相关性不明显,属典型的中低盐度流体体系,与造山过程相关的变质流体类似,表明该矿床可能为造山型金矿床。  相似文献   

11.
Mineralogic studies of major ore minerals and fluid inclusion analysis in gangue quartz were carried out for the for the two largest veins, the Aginskoe and Surprise, in the Late Miocene Aginskoe Au–Ag–Te deposit in central Kamchatka, Russia. The veins consist of quartz–adularia–calcite gangue, which are hosted by Late Miocene andesitic and basaltic rocks of the Alnei Formation. The major ore minerals in these veins are native gold, altaite, petzite, hessite, calaverite, sphalerite, and chalcopyrite. Minor and trace minerals are pyrite, galena, and acanthine. Primary gold occurs as free grains, inclusions in sulfides, and constituent in tellurides. Secondary gold is present in form of native mustard gold that usually occur in Fe‐hydroxides and accumulates on the decomposed primary Au‐bearing tellurides such as calaverite, krennerite, and sylvanite. K–Ar dating on vein adularia yielded age of mineralization 7.1–6.9 Ma. Mineralization of the deposit is divided into barren massive quartz (stage I), Au–Ag–Te mineralization occurring in quartz‐adularia‐clays banded ore (Stage II), intensive brecciation (Stage III), post‐ore coarse amethyst (Stage IV), carbonate (Stage V), and supergene stages (Stage VI). In the supergene stage various secondary minerals, including rare bilibinskite, bogdanovite, bessmertnovite metallic alloys, secondary gold, and various oxides, formed under intensely oxidized conditions. Despite heavy oxidation of the ores in the deposit, Te and S fugacities are estimated as Stage II tellurides precipitated at the log f Te2 values ?9 and at log fS2 ?13 based on the chemical compositions of hypogene tellurides and sphalerite. Homogenization temperature of fluid inclusions in quartz broadly ranges from 200 to 300°C. Ore texture, fluid inclusions, gangue, and vein mineral assemblages indicate that the Aginskoe deposit is a low‐sulfidation (quartz–adularia–sericite) vein system.  相似文献   

12.
The Salu Bulo prospect is one of the gold prospects in the Awak Mas project in the central part of the western province, Sulawesi, Indonesia. The gold mineralization is hosted by the meta‐sedimentary rocks intercalated with the meta‐volcanic and volcaniclastic rocks of the Latimojong Metamorphic Complex. The ores are approximately three meters thick, consisting of veins, stockwork, and breccias. The veins can be classified into three stages, namely, early, main, and late stages, and gold mineralization is related to the main stage. The mineral assemblage of the matrix of breccia and the veins are both composed of quartz, carbonate (mainly ankerite), and albite. High‐grade gold ores in the Salu Bulo prospect are accompanied by intense alteration, such as carbonatization, albitization, silicification, and sulfidation along the main stage veins and breccia. Alteration mineral assemblage includes ankerite ± calcite, quartz, albite, and pyrite along with minor sericite. Pyrite is the most abundant sulfide mineral that is spatially related to native gold and electrum (<2–42 μm in size). It is more abundant as dissemination in the altered host rocks than those in veins. This suggests that water–rock interaction played a role to precipitate pyrite and Au in the Salu Bulo prospect. The Au contents of intensely altered host rocks and ores have positive correlations with Ag, Ni, Mo, and Na. Fluid inclusions in the veins of the main stage and the matrix of breccia are mainly two‐phase liquid‐rich inclusions with minor two‐phase, vapor‐rich, and single‐phase liquid or vapor inclusions. CO2 and N2 gases are detected in the fluid inclusions by Laser Raman microspectrometry. Fluid boiling probably occurred when the fluid was trapped at approximately 120–190 m below the paleo water table. δ18OSMOW values of fluid, +5.8 and +7.6‰, calculated from δ18OSMOW of quartz from the main stage vein indicate oxygen isotopic exchange with wall rocks during deep circulation. δ34SCDT of pyrite narrowly ranges from ?2.0 to +3.4‰, suggesting a single source of sulfur. Gold mineralization in the Salu Bulo prospect occurred in an epithermal condition, after the metamorphism of the host rocks. It formed at a relatively shallow depth from fluids with low to moderate salinity (3.0–8.5 wt% NaCl equiv.). The temperature and pressure of ore formation range from 190 to 210°C and 1.2 to 1.9 MPa, respectively.  相似文献   

13.
Gold-bearing quartz veins of the Taihua Group consisting of Archean metavolcanic rocks are a main gold deposit type in the Xiao Qinling area,one of the three biggest gold production areas in China.The quartz veins experienced strong alteration characterized by a typical mesothermal hydrothermal altered mineral assemblage.The grade of gold is affected by the contents of sulphides,e.g.galena,pyrite and chalcopyrite.Results of minor elements analysis for the of gold-bearing quartz veins indicate higher contents of Au and high contents of Ag,Pb,Cu,Cd,W,and Mo.Abundant fluid inclusions were found in the gold-bearing quartz veins.Three types of fluid inclusions were identified:(1) aqueous inclusions;(2) CO 2-bearing inclusions;and(3) daughter crystal-bearing fluid inclusions.Homogenization temperatures ranged from 110 to 670℃ with low and high peaks appearing at 160 180℃ and 280 300℃,respectively.The salinity of aqueous inclusions varies between 1.8 wt% and 38.2 wt% NaCl.The homogenization temperature and salinity show a positive correlation.The H and O isotopes of fluid inclusions in the gold-bearing quartz veins indicate that magmatic solution and metamorphic hydrothermal solution,together with meteoric water,were involved in the formation of gold-bearing fluid.Mesozoic magma activities related to granite intrusions should be the main source of CO 2 fluid with higher temperature and salinity.  相似文献   

14.
黔西南紫木凼金矿床流体包裹体特征及对成矿的指示意义   总被引：2，自引：0，他引：2  
紫木凼金矿床是黔西南微细浸染型（卡林型）金矿带上的一个代表性金矿床。本文对该矿床主成矿阶段（Ⅱ）石英和方解石以及晚成矿阶段（Ⅲ）方解石中的流体包裹体进行了岩相学和显微测温研究,结果表明,各成矿阶段包裹体类型有H2O包裹体、CO2包裹体、CO2-H2O包裹体、气相CH4包裹体和CH4-H2O包裹体5类,其中CO2包裹体和CO2-H2O包裹体只在主成矿阶段（Ⅱ）的石英中发育。主成矿阶段和晚阶段流体包裹体均一温度范围分别为180～220℃和100～180℃,盐度分别为0.35%～7.45% NaCl和0.18%～5.71% NaCl,密度分别变化于0.745～0.969 g/cm3和0.868～0.993 g/cm3,总体属于中低温、低盐度、中等密度的H2O-NaCl-CO2流体体系。矿床成矿过程是一个温度退缩、盐度降低、密度增大的过程。主成矿阶段H2O-NaCl-CO2流体发生不混溶作用,是导致矿质沉淀成矿的主要原因。CO2流体、CH4流体在金的成矿过程中起重要作用。  相似文献   

15.
胶东西北部黄埠岭金矿床两期次叠加成矿   总被引：1，自引：0，他引：1  
黄埠岭金矿床位于胶东西北部招莱金矿带,产于北东向黄埠岭-凤凰山断裂的上盘,由18条大小不一的金矿脉组成。研究表明,北东向断裂控制早期中深成金矿成矿,北北东向断裂控制晚期浅成金矿成矿。早晚两期金矿化不同,早期中深成金矿以石英、黄铁矿、辉钼矿、银金矿、自然金、黄铜矿、闪锌矿和方铅矿等组合为特征,晚期浅成金矿以石英、方解石、银金矿、自然银、硫盐矿物和胶黄铁矿等组合为特征。早晚两期成矿叠加部位构成矿区内富矿段。  相似文献   

16.
八里房金矿床位于黑龙江省漠河县西北部,是一个新发现的金矿床。矿体赋存于闪长岩和中侏罗统额木尔河组长石砂岩中,矿石由含金、黄铁矿的长石砂岩和石英细脉组成。岩石地球化学研究表明：闪长岩稀土总量中到低,富集大离子亲石元素(如K、Rb、Ba)和化学性质活泼不相容元素(如U、Th、Pb),相对亏损高场强元素(如Ta、Nb、P、Sr、Ti),球粒陨石标准化稀土配分模式为轻稀土富集、重稀土亏损的右倾型,具有弱的Eu负异常(δEu平均值为0.8),无Ce异常(δCe=0.9～1.0),元素地球化学性质反映出八里房闪长岩具有岛弧岩浆岩的特征;长石砂岩稀土元素总量(∑REE)变化较大,具弱Eu负异常(δEu平均值为0.8),无Ce异常(δCe=0.9～1.0),为活动边缘砂岩系列。含金石英脉中流体包裹体有气液两相、含CO2三相和纯CO2流体包裹体3种类型。气液两相包裹体均一温度为107.9～247.4 ℃,盐度(w(NaCl))为3.05%～8.55%,密度为0.84～1.00 g·cm-3;含CO2三相包裹体完全均一温度为269.8～332.7 ℃,盐度为4.41%～10.29%,成矿流体为中低温、低盐度的热液流体体系。基于矿床地质特征、岩石地球化学和成矿流体特征的研究,笔者认为八里房金矿床为造山型金矿床。  相似文献   

17.
The Bangbu gold deposit is a large orogenic gold deposit in Tibet formed during the AlpineHimalayan collision. Ore bodies(auriferous quartz veins) are controlled by the E-W-trending Qusong-Cuogu-Zhemulang brittle-ductile shear zone. Quartz veins at the deposit can be divided into three types: pre-metallogenic hook-like quartz veins, metallogenic auriferous quartz veins, and postmetallogenic N-S quartz veins. Four stages of mineralization in the auriferous quartz veins have been identified:(1) Stage S1 quartz+coarse-grained sulfides,(2) Stage S2 gold+fine-grained sulfides,(3) Stage S3 quartz+carbonates, and(4) Stage S4 quartz+ greigite. Fluid inclusions indicate the oreforming fluid was CO_2-N_2-CH_4 rich with homogenization temperatures of 170–261°C, salinities 4.34–7.45 wt% Na Cl equivalent. δ~(18)Ofluid(3.98‰–7.18‰) and low δDV-SMOW(-90‰ to-44‰) for auriferous quartz veins suggest ore-forming fluids were mainly metamorphic in origin, with some addition of organic matter. Quartz vein pyrite has δ~(34)SV-CDT values of 1.2‰–3.6‰(an average of 2.2‰), whereas pyrite from phyllite has δ~(34)SV-CDT 5.7‰–9.9‰(an average of 7.4‰). Quartz vein pyrites yield 206Pb/204 Pb ratios of 18.662–18.764, 207Pb/204 Pb 15.650–15.683, and ~(208)Pb/204 Pb 38.901–39.079. These isotopic data indicate Bangbu ore-forming materials were probably derived from the Langjiexue accretionary wedge. 40Ar/39 Ar ages for sericite from auriferous sulfide-quartz veins yield a plateau age of 49.52 ± 0.52 Ma, an isochron age of 50.3 ± 0.31 Ma, suggesting that auriferous veins were formed during the main collisional period of the Tibet-Himalayan orogen(~65–41 Ma).  相似文献   

18.
The vein system in the Arinem area is a gold‐silver‐base metal deposit of Late Miocene (8.8–9.4 Ma) age located in the southwestern part of Java Island, Indonesia. The mineralization in the area is represented by the Arinem vein with a total length of about 5900 m, with a vertical extent up to 575 m, with other associated veins such as Bantarhuni and Halimun. The Arinem vein is hosted by andesitic tuff, breccia, and lava of the Oligocene–Middle Miocene Jampang Formation (23–11.6 Ma) and overlain unconformably by Pliocene–Pleistocene volcanic rocks composed of andesitic‐basaltic tuff, tuff breccia and lavas. The inferred reserve is approximately 2 million tons at 5.7 g t?1 gold and 41.5 g t?1 silver at a cut‐off of 4 g t?1 Au, which equates to approximately 12.5t of Au and 91.4t of Ag. The ore mineral assemblage of the Arinem vein consists of sphalerite, galena, chalcopyrite, pyrite, marcasite, and arsenopyrite with small amounts of pyrrhotite, argentite, electrum, bornite, hessite, tetradymite, altaite, petzite, stutzite, hematite, enargite, tennantite, chalcocite, and covellite. These ore minerals occur in quartz with colloform, crustiform, comb, vuggy, massive, brecciated, bladed and calcedonic textures and sulfide veins. A pervasive quartz–illite–pyrite alteration zone encloses the quartz and sulfide veins and is associated with veinlets of quartz–calcite–pyrite. This alteration zone is enveloped by smectite–illite–kaolinite–quartz–pyrite alteration, which grades into a chlorite–smectite–kaolinite–calcite–pyrite zone. Early stage mineralization (stage I) of vuggy–massive–banded crystalline quartz‐sulfide was followed by middle stage (stage II) of banded–brecciated–massive sulfide‐quartz and then by last stage (stage III) of massive‐crystalline barren quartz. The temperature of the mineralization, estimated from fluid inclusion microthermometry in quartz ranges from 157 to 325°C, whereas the temperatures indicated by fluid inclusions from sphalerite and calcite range from 153 to 218 and 140 to 217°C, respectively. The mineralizing fluid is dilute, with a salinity <4.3 wt% NaCl equiv. The ore‐mineral assemblage and paragenesis of the Arinem vein is characteristically of a low sulfidation epithermal system with indication of high sulfidation overprinted at stage II. Boiling is probably the main control for the gold solubility and precipitation of gold occurred during cooling in stage I mineralization.  相似文献   

19.
The Antuoling Mo deposit is a major porphyry‐type deposit in the polymetallic metallogenic belt of the northern Taihang Mountains, China. The processes of mineralization in this deposit can be divided into three stages: an early quartz–pyrite stage, a middle quartz–polymetallic sulfide stage, and a late quartz–carbonate stage. Four types of primary fluid inclusions are found in the deposit: two‐phase aqueous inclusions, daughter‐mineral‐bearing multiphase inclusions, CO2–H2O inclusions, and pure CO2 inclusions. From the early to the late ore‐forming stages, the homogenization temperatures of the fluid inclusions are 300 to >500°C, 270–425°C, and 195–330°C, respectively, with salinities of up to 50.2 wt%, 5.3–47.3 wt%, and 2.2–10.4 wt% NaCl equivalent, revealing that the ore‐forming fluids changed from high temperature and high salinity to lower temperature and lower salinity. Moreover, based on the laser Raman spectra, the compositions of the fluid inclusions evolved from the NaCl–CO2–H2O to the NaCl–H2O system. The δ18OH2O and δD values of quartz in the deposit range from +3.9‰ to +7.0‰ and ?117.5‰ to ?134.2‰, respectively, reflecting the δD of local meteoric water after oxygen isotopic exchange with host rocks. The Pb isotope values of the sulfides (208Pb/204Pb, 36.320–37.428; 207Pb/204Pb, 15.210–15.495; 206Pb/204Pb, 16.366–17.822) indicate that the ore‐forming materials originated from a mixed upper mantle–lower crust source.  相似文献   

20.
根据山后金矿床的矿物组合和矿物生成顺序,将成矿阶段划分为4个阶段:黄铁矿-石英(钾化)阶段、石英—黄铁矿(绢英岩化)阶段、金-石英-多金属硫化物阶段和石英-碳酸盐阶段。对区内主成矿阶段的石英中流体包裹体进行岩相学、显微测温及氢氧同位素进行分析。结果表明:矿石中的包裹体主要有含CO2三相包裹体、气液两相包裹体和CO2包裹体三种类型,矿石中的包裹体普遍富含CO2。成矿过程中,流体经历了CO2-H2O—Na Cl体系的不混溶作用。成矿流体具有低盐度(4.0~9.0 wt%Na Cl.eqv)和低密度(0.70~0.89 g/cm3)的特点。主成矿温度为260℃~300℃,成矿压力为83~100 MPa,对应成矿深度为7.45~8.25 km。流体包裹体氢氧同位素分析结果介于地幔初生水和岩浆水之间,部分向大气降水线方向漂移,表明山后金矿成矿流体以幔源流体为主,并有大气降水和其他流体的加入,初步确定山后金矿床是受断裂构造控制的中温热液脉型金矿床。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号