首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Utilization of satellite images and field observations of dike swarms in pre-Fatima basement show that these dikes are older than the overlaying Fatima Formation. Dikes digitization and orientation analysis on satellite images show that the prevailing trend of the dikes is ENE-WSW. The granitic rocks of pre-Fatima basement and its hosted dikes expose evidences of completely a different deformation regime from the overlaying Fatima Formation. These evidences include shearing, dextral shear indicators, isoclinal folds, deflection and rotation of crystals, mineral elongation, and mylonitic and gneissose textures. Strain analysis results of using Fry method on quartz and feldspar grains support the presence of deformation in these ENE-WSW dikes. These results gave a strain ratio of 2.1:1.3:1, which suggest an amount of 40% stretching in the ENE-WSW direction parallel to the dike walls, and an amount of 30% shortening in the NNW-SSE direction. Mesoscopic and microscopic scale structures confirm the existence of dextral ductile-brittle shearing followed the emplacement of the dikes and before the pure shear deformation that caused the thrusting and folding of Fatima Formation. This ductile-brittle deformation is correlated with the dextral transpression that formed the Fatima Shear Zone (FSZ).  相似文献   

2.
Phulad Shear Zone (PSZ) of Delhi Fold Belt in Rajasthan is a northeasterly striking ductile shear zone with a well developed mylonitic foliation (035/70E) and a downdip stretching lineation. The deformation in the PSZ has developed in a transpressional regime with thrusting sense of movement. The northeastern unit, i.e., the hanging wall contains a variety of rocks namely calc-silicates, pelites and amphibolites and the southwestern unit, i.e., the footwall unit contains only granitic rocks. Systematic investigation of the granites of the southwestern unit indicate a gradual change in the intensity of deformation from a distance of about 1 km west of the shear zone to the shear zone proper. The granite changes from weakly deformed granite to a mylonite/ultramylonite as we proceed towards the PSZ. The weakly deformed granite shows a crude foliation with the same attitude of mylonitic foliation of the PSZ. Microscopic study reveals the incipient development of C and S fabric with angle between C and S varying from 15 ° to 24 °. The small angle between the C and S fabric in the least deformed granite variety indicates that the deformation has strong pure shear component. At a distance of about 1 m away from the PSZ, there is abrupt change in the intensity of deformation. The granite becomes intensely foliated with a strong downdip lineation and the rock becomes a true mylonite. In mesoscopic scale, the granite shows stretched porphyroclasts in both XZ and YZ sections indicating a flattening type of deformation. The angle between the C and S fabric is further reduced and finally becomes nearly parallel. In most places, S fabric is gradually replaced by C fabric. Calculation of sectional kinematic vorticity number ( Wn) from the protomylonitic and mylonite/ultramylonite granites varies from 0.3 ± 0.03 to 0.55 ± 0.04 indicating a strong component of pure shear. The similarity of the geometry of structures in the PSZ and the granites demonstrates that the deformation of the two units is broadly synchronous and the deformation in both the units is transpressional.  相似文献   

3.
  相似文献   

4.
The tectonometamorphic evolution of Nugrus Shear Zone (NSZ) in the south Eastern Desert of Egypt was reevaluated through an integrated study including field-structural work and magnetofabric analysis using Anisotropy of Magnetic Susceptibility (AMS) technique, complemented by detailed microstructural investigation. Several lines of evidence indicate that the Neoproterozoic juvenile crust within this high strain zone suffered an impressive tectonic event of left-lateral transpressional regime, transposed the majority of the earlier formed structures into a NNW to NW-directed wrench corridor depicts the northwestern extension of the Najd Shear System (NSS) along the Eastern Desert of Egypt. The core of the southern Hafafit dome underwent a high metamorphic event (M1) developed during the end of the main collisional orogeny in the Arabian-Nubian Shield (ANS). The subsequent M2 metamorphic event was retrogressive and depicts the tectonic evolution and exhumation of the Nugrus-Hafafit area including the Hafafit gneissic domes, during the origination of the left-lateral transpressive wrench corridor of the NSS. The early tectonic fabric within the NSZ and associated highly deformed rocks was successfully detected by the integration of AMS-technique and microstructural observations. Such fabric grain was checked through a field-structural work. The outcomes of the present contribution advocate a complex tectonic evolution with successive and overlapped deformation events for the NSZ.  相似文献   

5.
Recent field campaign in the southern Menderes Massif in southwestern Turkey revealed that the so-called ‘core of the massif’ comprises two distinct types of granitoid rocks: an orthogneiss (traditionally known as augen gneisses) and leucocratic metagranite, where the latter is intrusive into the former and the structurally overlying ‘cover’ schists. These differ from one another in intensity of deformation, degree of metamorphism and kinematics. The orthogneiss display penetrative top-to-the-N–NNE fabrics formed under upper-amphibolite facies conditions during the Eocene main Menderes metamorphism (MMM), whereas foliation and stretching lineation exists in the leucocratic metagranites but are not strongly developed. The leucocratic metagranites show evidence of syn- to post-emplacement deformation in a series of weakly developed top-to-the-S–SSW fabrics formed under lower greenschist-facies (?) conditions. Leucocratic metagranite bodies occur all along the augen gneiss–schist contact in the southern Menderes Massif; they are emplaced as sheet-like bodies into country rocks (previously deformed and metamorphosed during a top-to-the-N–NNE Alpine orogeny) along a ductile extensional shear zone, located between orthogneisses and metasediments, which was possibly active during emplacement. The data presently available indicate that emplacement and associated ductile extensional deformation occurred during Late Oligocene–Early Miocene time. These results confirm previous contentions that there are Tertiary granites in this part of the Menderes Massif.  相似文献   

6.
The Mizil gneiss dome is an elliptical structure consisting of an amphibolite-facies volcanosedimentary mantle and a gneissic granite core. This dome is located at the northern tip of the Ar Rayn terrane only a few kilometers from the eastern edge of the Arabian shield. Previous investigations have shown the intrusive core to be an adakitic diapir with a U–Pb zircon age of 689 ± 10 Ma; this age is 50–80 Ma years older than other granites in this terrane. Vorticity analysis was carried out on samples from the intrusive core and volcanosedimentary cover; the Passchier and Rigid Grain Net (RGN) methods were used to obtain the kinematic vorticity number (Wk) and the mean kinematic vorticity number (Wm). The Wk and Wm values show a marked increase towards the south; such a pattern indicates a N-S movement of the core pluton thus creating an inclined diapir tilted to the south. Analogue experiments simulating the flow of magma diapirs rising form a subducted slab through the mantle wedge have shown that supra-subduction zone oblique diapirs are produced close to the trench and are elongated normal to the convergence direction as is the case in the Mizil pluton. This effect was found to increase with increasing slab dip due to enhanced drag along the upper surface of the subducted lithospheric plate. Spontaneous subduction which is often associated with rollback resulting in back-arc extension and steep dipping slabs is thought to have occurred in the Mozambique Ocean by 700 Ma. The Mizil pluton is coeval with the back-arc Urd ophiolite from the adjacent Dawadimi terrane, and could therefore have been produced by incipient subduction of a relatively cold slab as observed in many Pacific margin adakites. The tectonic evolution of the eastern shield, as deduced from the Mizil dome and other data from Ar Rayn and neighboring terranes, begins with the subduction of >100 My-old lithosphere beneath the Afif terrane resulting in back-arc spreading and the splitting of the Ar Rayn arc from the Afif microplate, with the concomitant production of a small volume of adakite melt. Other arc terrane(s) docked east of Ar Rayn with the westward-directed subduction still going but a lower angles and greater depth due to trench jump; this phase produced the more prevalent non-adakitic group-1 granites. A major collisional orogeny affected the entire eastern shield between 620–600 Ma and sutured the eastern shield terranes with northern Gondwana.  相似文献   

7.
Mubarak shear belt provides an opportunity to investigate quantitative finite strain (Rs), proportions of pure shear and simple shear components, sense of shear indicators, subhorizontal to steeply plunging mineral lineations, in a dextral transpressional zone. The structural style of the Mubarak shear belt is consistent with dextral transpression within the Central Eastern Desert where dextral and reverse shear have developed simultaneously with the regional foliation. The high strain zone of the Mubarak shear belt is characterized by steeply dipping foliation with sub-horizontal stretching lineation (simple shear) surrounded by thrust imbrications with slightly plunging stretching lineations. Strain estimates from the Mubarak shear belt are used to determine how pure and simple shear components of deformation are partitioned. The axial ratios in XZ sections range from 1.16 to 2.33 with the maximum stretch, S X , ranges from 1.06 to 1.48. The minimum stretch, S Z , ranges from 0.65 to 0.92 indicating a moderate variation in vertical shortening. Volcaniclastic metasediments and metagabbros were subjected to prograde low-grade regional metamorphism in the range of greenschist to lower amphibolite facies (450–650°C at 2–4 kbar). Medium pressure (6–8 kbar at 530°C) was estimated from the high strain zone within the dextral strike-slip shear zones. Retrograde metamorphism occurred at a temperature range of 250–280°C. There is a trend towards decreasing the ratio of 100Mg/(Mg + Fetot + Mn) away from the high strain zone of the Mubarak shear belt. Integrated strain and temperature estimates indicate that the simple shear (non-coaxial) components of deformation played a significant role in formation and exhumation of the Mubarak shear belt during the accumulation of finite strain and consequently during progressive transpression and thrusting.  相似文献   

8.
  相似文献   

9.
We studied the petrography, mineralogy, and geochemistry of the Paleoproterozoic (2.06 Ga) granites of the Katugin massif (Stanovoy suture zone), which hosts the combined rare-metal Katugin deposit. Three groups of granites were distinguished: (1) biotite (Bt) and biotite–riebeckite (Bt–Rbk) granites of the western block of the massif; (2) biotite–arfvedsonite (Bt–Arf) granites of the eastern block; and (3) arfvedsonite (Arf), aegirine–arfvedsonite (Aeg–Arf), and aegirine (Aeg) granites of the eastern block. The Bt and Bt–Rbk granites of the first group are mainly metaluminous and peraluminous rocks with rather high CaO contents and the minimum F contents among the granites described here. It was suggested that the granites of this group could be derived from a source dominated by crustal rocks with a small addition of mantle materials. These granites probably crystallized from a metaluminous–peraluminous melt with elevated CaO and moderate F contents. Melts of such compositions are least favorable for the crystallization of ore minerals. The Bt–Arf granites of the second group are mainly peralkaline and show high contents of CaO and Y and low contents of Na2O and F. A mixed mantle–crust source was proposed for the Bt–Arf granites. The initial melt of the Bt–Arf granites could have a peralkaline composition with elevated CaO content and moderate to high F content. The Arf, Aeg–Arf, and Aeg granites of the third group are enriched in ore mineral and were classified as peralkaline granites with very low CaO contents, elevated Na2O and F contents, and usually very high contents of Zr, Hf, Nb, and Ta. Based on the geochemical and isotopic data, it was supposed that the source of the granites of the third group could be derivatives of basaltic magmas produced in an OIB-type source with a minor addition of crustal material to the magma generation zone. It was suggested that the primary melt of this granite group could be a peralkaline CaO-poor and F-rich silicic melt, which is most favorable for the crystallization of ore minerals. Based on the analysis of the geochemical characteristics of the three granite groups and their relationships within the Katugin massif, a qualitative model of its formation was proposed. According to this model, the Bt and Bt–Rbk granites of the western block crystallized first, followed by the Bt–Arf granites of the eastern block and, eventually, the Arf, Aeg–Arf, and Aeg granites enriched in ore minerals.  相似文献   

10.
The granitic mylonite zone in the Cretaceous Ryoke metamorphic belt contains deformed amphibolites as thin layers. The amphibolite layers do not exhibit pinch‐and‐swell or boudinage structures, even when contained in a high‐strain granitic mylonite. This mode of occurrence suggests that they were deformed as much as the surrounding granite mylonite. In the highly deformed zone, strongly foliated amphibolites contain Ti‐rich brown amphibole porphyroclasts rimmed by Ti‐poor green amphibole, titanite and chlorite. These porphyroclasts are elongated, forming shear surfaces defined by preferential distribution of the chlorite and titanite. Porphyroclastic plagioclase in the strongly foliated amphibolites consists of two components: an anorthite‐rich core and an anorthite‐poor rim. Based on these observations, the mass‐balanced reaction occurring during deformation is defined as As the reaction products form a weak interconnected matrix, the strain rate of the amphibolites may be controlled by the rate of dissolution–precipitation through fluids. Weakly foliated amphibolites in the low‐strain zone exhibit cataclastic microstructures, whereas the strongly foliated amphibolites do not exhibit such features. These microstructural and chemical changes suggest that high‐strain amphibolites were initially deformed by cataclasis, followed by deformation through metamorphic reactions. During the metamorphism/deformation, old plagioclase grains with high Xan were not stable and dissolved, and new plagioclase grains with low Xan crystallized at the old plagioclase rim. Dissolution of old plagioclase and precipitation of new plagioclase occurred normal to and parallel to the foliation, respectively, reflecting incongruent pressure solution due to differential stress and changes in P–T–H2O conditions. The development of incongruent pressure solution is attributed to increased fluid flux in the strongly foliated amphibolites, as evidenced by the greater abundance of hydration‐reaction products in the strongly foliated amphibolites than in the weakly foliated ones.  相似文献   

11.
The paper presents original authors’ data on aluminous schists in the Tsogt tectonic plate in the Southern Altai Metamorphic Belt. The nappe includes a medium-temperature/medium-pressure zonal metamorphic complex, whose metamorphic grade varies from the greenschist to epidote-amphibolite facies. The garnet and garnet–staurolite schists contain three garnet generations of different composition and morphology. The P–T metamorphic parameters estimated by mineralogical geothermometers and geobarometers and by numerical modeling with the PERPLEX 668 software provide evidence of two successive metamorphic episodes: high-gradient (of the andalusite–sillimanite type, geothermal gradient approximately 40–50°/km) and low-gradient (kyanite–sillimanite type, geothermal gradient approximately 27°/km). The P-T parameters of the older episode are T = 545–575°C and P = 3.1–3.7 kbar. Metamorphism during the younger episode was zonal, and its peak parameters were T = 560–565°C, P = 6.4–7.2 kbar for the garnet zone and T = 585–615°C, P = 7.1–7.8 kbar for the staurolite zone. The metamorphism evolved according to a clockwise P–T path: the pressure increased during the first episode at a practically constant temperature, and then during the second episode, the temperature increased at a nearly constant pressure. Such trends are typical of metamorphism related to collisional tectonic settings and may be explained by crustal thickening due to overthrusting. The regional crustal thickening reached at least 15–18 km.  相似文献   

12.
The emplacement of the ca 1590–1575 Ma Hiltaba Suite granites records a large magmatic event throughout the Gawler Craton, South Australia. The Hiltaba Suite granites intrude the highly deformed Archaean‐Palaeoproterozoic rocks throughout the craton nuclei. Geophysical interpretation of the poorly exposed central western Gawler Craton suggests that the region can be divided into several distinct domains that are bounded by major shear zones, exhibiting a sequence of overprinting relationships. The north‐trending Yarlbrinda Shear Zone merges into the east‐trending Yerda Shear Zone that, in turn, merges into the northeast‐trending Coorabie Shear Zone. Several poorly exposed Hiltaba Suite granite plutons occur within a wide zone of crustal shearing that is bounded to the north by the Yerda Shear Zone and to the south by the Oolabinnia Shear Zone. This wide zone of crustal shearing is interpreted as a major zone of synmagmatic dextral strike‐slip movement that facilitated the ascent of Hiltaba Suite granite intrusions to the upper crust. The aeromagnetic and gravity data reveal that the intrusions are ～15–25 km in diameter. Forward modelling of the geophysical data shows that the intrusions have a tabular geometry and are less than 6 km deep.  相似文献   

13.
The present study deals with the seismic site classification of Bahrah area, Wadi Fatima, to characterize the local site conditions. The dynamic behavior of sediments was studied by the application of surface wave inversion. The multichannel analysis of surface waves (MASW) shallow geophysical technique was utilized for site classification. MASW survey was carried out at 66 sites along with 13 seismic refraction profiles at suitable localities. MASW and seismic refraction profiles were processed and compared with the available borehole data. The integration of MASW techniques with seismic refraction and borehole data progressively enhanced the subsurface visualization and reliability of the shear wave velocity estimation in the subsurface in the study area. The subsurface shear-wave velocity model was achieved by the solution of an inverse problem-based dispersion of surface waves and propagation in a vertically heterogeneous medium. The 2D genetic algorithm was employed for the inversion of dispersion curves to obtain velocity and thickness of subsurface layers. The depth to engineering bedrock and velocity of shear waves in the first 30 m was deciphered and mapped. The depth of bedrock in study area varies from 4 to 30 m, and V S 30 ranges from 320 to 800 m/s. The most of study area falls in B and C class categories in addition to few sites of D class according to the NEHRP guidelines.  相似文献   

14.
The low-angle dip schistosity zones of the Belomorian mobile belt of northern Karelia are zones of plastic flow of thrust origin. They were formed from 1.85 to 1.90 Ga: 1879 ± 21 Ma according to 40Ar/39Ar for amphibole from amphibolites and 1857 ± 13 Ma according to the Sm–Nd isochron in amphibolites. The P–T parameters of rock metamorphism in low-angle dip schistosity zones correspond to the boundary of amphibolite and granulite facies of metamorphism: T = 640–765°C, rarely rising to 826°C; P = 8.0–11.7 kbar. The hypothesis of the two-stage Paleoproterozoic metamorphism of rocks of the Belomorian mobile belt was introduced.  相似文献   

15.
Detailed field-structural mapping of Neoproterozoic basement rocks exposed in the Wadi Yiba area, southern Arabian Shield, Saudi Arabia illustrates an important episode of late Neoproterozoic transpression in the southern part of the Arabian-Nubian Shield (ANS). This area is dominated by five main basement lithologies: gneisses, metavolcanics, Ablah Group (meta-clastic and marble units) and syn- and post-tectonic granitoids. These rocks were affected by three phases of deformation (D1–D3). D1 formed tight to isoclinal and intrafolial folds (F1), penetrative foliation (S1), and mineral lineation (L1), which resulted from early E-W (to ENE-WSW) shortening. D2 deformation overprinted D1 structures and was dominated by transpression and top-to-the-W (?WSW) thrusting as shortening progressed. Stretching lineation trajectories, S-C foliations, asymmetric shear fabrics and related mylonitic foliation, and flat-ramp and duplex geometries further indicate the inferred transport direction. The N- to NNW-orientation of both “in-sequence piggy-back thrusts” and axial planes of minor and major F2 thrust-related overturned folds also indicates the same D2 compressional stress trajectories. The Wadi Yiba Shear Zone (WYSZ) formed during D2 deformation. It is one of several N-S trending brittle-ductile Late Neoproterozoic shear zones in the southern part of the ANS. Shear sense indicators reveal that shearing during D2 regional-scale transpression was dextral and is consistent with the mega-scale sigmoidal patterns recognized on Landsat images. The shearing led to the formation of the WYSZ and consequent F2 shear zone-related folds, as well as other unmappable shear zones in the deformed rocks. Emplacement of the syn-tectonic granitoids is likely to have occurred during D2 transpression and occupied space created during thrust propagation. D1 and D2 structures are locally overprinted by mesoscopic- to macroscopic-scale D3 structures (F3 folds, and L3 crenulation lineations and kink bands). F3 folds are frequently open and have steep to subvertical axial planes and axes that plunge ENE to ESE. This deformation may reflect progressive convergence between East and West Gondwana.  相似文献   

16.
Wadi Fatima, east of jiddah on the Red Sea coast of Saudi Arabia, is a microcosm of the geology of the jiddah area. Rocks ranging in age from 800-million-year-old metamorphic rocks to Tertiary lava flows are exposed, and illustrate the geological richness of western Saudi Arabia. The valley is a major south-west-trending fault zone that has been active since Precambrian times. A major Tertiary dyke swarm in the vicinity of Wadi Fatima is related to the opening of the Red Sea as the African-Arabian landmass split apart.  相似文献   

17.
Structural investigations in the Precambrian Singhbhum Shear Zone of eastern India document an intimate relationship between micro- to meso-scale structures and the deformation history. Shear zone rocks are characterized by composite foliation, a well-developed stretching lineation, folds, shear planes, and quartz veins. These structures reflect thrusting of the Proterozoic north Singhbhum hanging wall block over the Archaean south Singhbhum footwall block. Microstructural analysis of multiple foliation and mylonitic rocks within the shear zone helps to define its progressive evolution. During progressive deformation, overprinting of microstructures resulted in incomplete transposition or complete erasing of previously formed structures and mineral assemblages, allowing room for new dynamic equilibrium structures to form. The dominant deformation mechanism was dissolution–recrystallization, with locally important fluid circulation responsible for transformation of the quartzo-feldspathic mass into phyllonite, and quartzites and schists into mylonite. Textural features suggest that the bulk deformation was non-coaxial, evolving from dominant pure shear in the early stage followed by simple shear in a single progressive strain history of the Singhbhum Shear Zone.  相似文献   

18.
The genera Titanites and Glaucolithites, which were previously known only from the Portlandian of Northwestern Europe are now established in Epivirgatites nikitini Zone of European Russia. The Volgian species of Titanites are represented by both the endemic taxa Titanites (Paratitanites) manipulocostatus subgen. et sp. nov. and T. (Pseudogalbanites) triceps subgen. et sp. nov. and Titanites (Titanites) ex gr. titan Buckman of the Portland type. A new species Glaucolithites gardarikensis is described. It is likely that these ammonites migrated to the Central Russian Sea from northwestern Europe via the Norway-Greenland seaway and further to the Mezen-Pechora system of straits, which is supported by occurrences of Titanites in the north of Central Russia and Glaucolithites in East Greenland and on Spitsbergen. The direct and indirect correlations show that the middle part of the Nikitini Zone (Lahuseni Subzone) should at least partly be correlated with the Portlandian Kerbeus Zone.  相似文献   

19.
This work establishes the relative timing of pluton emplacement and regional deformation from new dating and structural data. (1) Monazite and (2) zircon dating show Tournaisian ages for the Guéret granites [Aulon granite 352 ± 5 Ma (1), 351 ± 5 Ma (2) and Villatange tonalite 353 ± 6 Ma (1)] and Viseo-Namurian ages for the north Millevaches granites [Chavanat granite 336 ± 4 Ma (1), Goutelle granite 336 ± 3 Ma (1), Royère granite 323 ± 2 Ma (1) and 328 ± 6 Ma (2), Courcelles granite 318 ± 3 Ma (1)]. The Guéret and Millevaches granites are separated by the N110 Arrènes–la Courtine Shear Zone (ACSZ), composed from West to East by the Arrènes Fault (AF), the North Millevaches Shear Zone (NMSZ) and the la Courtine Shear Zone (CSZ), respectively. Tournaisian Guéret granites experienced a non-coaxial dextral shearing (NMSZ) recorded by the Villatange granite while the Aulon granite (Guéret granite) cuts across this dextral shear zone which thus stopped shearing during Tournaisian time. Visean to Namurian Millevaches granites experienced a coaxial deformation. Therefore, low displacements along the NMSZ and the CSZ occurred at the emplacement time of Chavanat and Pontarion-Royère granites (336–323 Ma). The structural analyses of Goutelle granite emphasizes a deformation related to the dextral Creuse Fault System (CFS) oriented N150–N160. From 360 to 300 Ma, the Z strain axis is always horizontal inferring a wrench setting for these granite emplacements. During this tectonic evolution, the Argentat zone acted as a minor normal fault and is related with a local Middle Visean (340–335 Ma) syn-orogenic extension on the western border of the Millevaches massif.  相似文献   

20.
Extraction of useful geochemical, petrologic and structural information from deformed fluid inclusions is still a challenge in rocks displaying moderate plastic strain. In order to better understand the inclusion modifications induced by deviatoric stresses, six deformation experiments were performed with a Griggs piston-cylinder apparatus. Natural NaCl–H2O inclusions in an oriented quartz crystal were subjected to differential stresses of 250–470 MPa at 700–900 °C and at 700–1,000 MPa confining pressure. Independently of the strain rate and of the crystallographic orientation of the quartz, the inclusions became dismembered and flattened within a crystallographic cleavage plane subperpendicular to σ 1. The neonate (newly formed) inclusions that result from dismemberment have densities that tend towards equilibrium with P fluid = σ 1 at T shearing. These results permit ambiguities in earlier deformation experiments on CO2–H2O–NaCl to be resolved. The results of the two studies converge, indicating that density changes in neonate inclusions are promoted by high differential stresses, long periods at high P and high T, and fluid compositions that maximize quartz solubility. Neonates spawned from large precursor inclusions show greater changes in density that those spawned from small precursors. These findings support the proposal that deformed fluid inclusions can serve as monitors of both the orientation and magnitude of deviatoric stresses during low-strain, ductile deformation of quartz-bearing rocks.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号