共查询到20条相似文献，搜索用时 70 毫秒
1.
Harry G. Poulos 《国际地质力学数值与分析法杂志》1999,23(10):1021-1041
This paper describes the development of an approximate approach for the analysis and design of piles subjected to axial and lateral loading and also to vertical and horizontal ground movements. The analysis involves a number of simplifications in order to make it feasible to implement. For example, it considers the behaviour of a ‘representative’ pile in a group to characterize the behaviour of all piles in the group, and adopts approximations to derive free-field interaction factors from the conventional interaction factors for direct loading. The analysis has been implemented via a computer program called EMbankment PIle Group (EMPIG) and has the ability to incorporate the following features:
- 1. single piles or pile groups,
- 2. applied vertical, lateral and moment loading on the pile cap,
- 3. the effects of axial and lateral soil movements caused by embankment construction,
- 4. a layered soil profile,
- 5. non-linear axial and lateral response of the piles.
2.
This paper focuses on an analysis by the boundary element method (BEM) of the pile-to-pile interaction for pile groups with dissimilar piles of different pile lengths embedded in saturated poroelastic soil. The behaviour of the poroelastic homogeneous soil is governed by Biot’s consolidation equations. The pile–soil system is decomposed into extended soil and fictitious piles. Considering the compatibility of vertical strain between fictitious piles and soil, the second kind of Fredholm integral equations were obtained to predict the axial force and settlement along pile shafts numerically. For the analysis of the interaction factor, two loading conditions for a two-dissimilar-pile system were proposed: (a) only one pile is loaded and (b) each pile is subjected to a load proportional to the pile length. Furthermore, the two-pile system was extended to pile groups with a rigid cap to capture the optimum design where each pile shares the same loading at the pile heads. The optimum results require shortening the peripheral piles and elongating internal piles, and the consolidation effect needs to be considered due to the adjustment of loading distribution among piles. 相似文献
3.
Three-dimensional (3D) finite element analyses have been performed to study the behaviour of a single pile and 3 × 3 and 5 × 5 pile groups during open face tunnelling in stiff clay. Several governing factors, such as tunnelling-induced ground and pile settlement, axial pile force changes and shear transfer mechanism at the pile–soil interface, have been studied in detail. Tunnelling resulted in the development of pile head settlement larger than the free-field soil surface settlement. In addition, axial force distributions along the pile change substantially due to changes in the shear transfer between the pile and the soil next to the pile, which triggers tunnelling-induced tensile forces in the piles with tunnel advancement. It was found that the relative displacements and the normal stresses at the pile–soil interface drastically affected shear transfer. The extent of slip length along a pile increased as the tunnelling proceeded. The apparent allowable pile capacity was reduced by up to approximately 42% due to the development of tunnelling-induced pile head settlement. Shear stress on the pile was increased for most of the pile depth with tunnel advancement, which was associated with changes in soil stresses and ground deformation, and hence, the axial pile force was gradually reduced with tunnel advancement, indicating the development of tunnelling-induced tensile pile force. The maximum tunnelling-induced tensile force on the pile was approximately 0.33Pa, where Pa is the allowable pile capacity applied to the pile head prior to tunnel excavation. The range affected by tunnelling in the longitudinal direction may be identified as approximately −2D ∼ +(1.5–2.0D), where D is the tunnel diameter, from the pile centre (behind and ahead of the pile axis), in terms of pile settlement and axial pile force changes based on the analysis conditions assumed in the current study. Larger pile head settlements and smaller changes in axial pile forces were computed for piles that were part of groups. It has been found that the serviceability of piles experiencing adjacent tunnelling is more affected by pile settlement than by axial pile force changes, in particular for piles inside groups. The magnitude of the tunnelling-induced excess pore pressure was small and may not substantially affect pile behaviour. 相似文献
4.
《Geomechanics and Geoengineering》2013,8(4):291-298
The buckling behaviour of the 360 × 152 steel H-piles supporting the integral abutments of the Scotch Road Bridge, located in Trenton, New Jersey, has been studied for the cases of single pile and pile bent. Three-dimensional finite-element models for single pile and pile bent have been developed to study the behaviour of these fully embedded piles under axial and lateral loading. An iterative analysis based on extracting the eigenvalues and eigenvectors (mode shapes) that correspond to the pile(s) critical buckling loads has been adopted. The pile(s) and the surrounding sand were modelled using solid continuum elements in the finite-element model. Material non-linearity is accounted for in both the piles and the soil in the base state of the model. A parametric study has been utilized to determine the effect of the geometric and material properties of the pile and the surrounding sand on the predicted critical buckling loads of the piles. The effects of four parameters have been studied: soil stiffness, pile length, type of connection, and combining vertical and lateral loads. The results from the parametric study showed that the variation of the percentage change in the sand stiffness, pile length, and combining vertical and lateral loads with the critical buckling loads of the 360 × 152 H-piles is nonlinear. Furthermore, the parameters studied are more influential in affecting the critical buckling load of a single pile than a pile bent, with the exception of the ‘type of connection’ parameter. 相似文献
5.
采用双曲线模型模拟桩土界面上的力学行为,利用剪切位移法反映剪应力在土层中的传递,考虑群桩之间的相互作用,建立了热?力耦合作用下能量桩群桩基础工作特性的简化分析方法。该方法能反映桩土界面上的非线性、桩顶的约束条件和能量桩位置的影响,可直接计算所有桩的位移和轴力。与现有方法相比,计算得到的双桩相互作用因子更加合理。通过与文献中试验数据的对比表明,若只有局部桩经历温度变化,能量桩运行过程中各桩之间存在差异变形,基础出现倾斜,桩顶荷载发生重分布。所建立方法计算方便,能合理模拟能量桩群桩基础的主要工作特性,可用于大规模能量桩群桩基础的设计计算。 相似文献
6.
Three-dimensional (3D) numerical analyses have been carried out to study the behaviour of a single pile to adjacent tunnelling in the lateral direction of the pile. The numerical analyses have included comparisons between the current study, previous elastic solutions and advanced 3D elasto-plastic analyses. In the numerical analyses, the interaction between the tunnel, the pile and the soil next to the pile has been analysed. The study includes the axial force distributions on the pile, the relative shear displacement between the pile and the soil, the shear stresses at the soil next to the pile and the pile settlement. In particular, the shear stress transfer mechanism along the pile related to tunnel advancement has been analysed by using interface elements allowing soil slip. It has been found that existing solutions may not accurately estimate the pile behaviour since several key issues are not included. Due to changes in the relative shear displacement between the pile and the soil next to the pile with tunnel advancement, the shear stresses and axial force distributions along the pile change drastically. Downward shear stress develops at the upper part of the pile, while upward shear stress is mobilised at the lower part of the pile, resulting in a compressive force on the pile. A maximum compressive force of about 0.25–0.52Pa was developed on the pile, solely due to tunnelling, depending on the pile tip locations relative to the tunnel position, where Pa is the service pile loading prior to tunnelling. The majority of the axial force on the pile developed within ±2D in the transverse direction (behind and ahead of piles) relative to the pile position, where D is the tunnel diameter. In addition, mobilisation of shear strength at the pile–soil interface was found to be a key factor governing pile–soil–tunnelling interaction. The reduction of apparent allowable pile capacity due to tunnelling was dependent on the pile location relative to the tunnel position. Some insights into the pile behaviour in tunnelling obtained from the numerical analyses will be reported and discussed. 相似文献
7.
轴向荷载对斜桩水平承载特性影响试验及理论研究 总被引：1，自引：0，他引：1
斜群桩受水平荷载作用时,群桩中的基桩受到径向荷载、轴向荷载和弯矩的共同作用。为研究轴向荷载对斜桩水平承载特性的影响,完成了3根单桩以及1组1×2斜桩的大尺寸模型试验。试验结果表明：轴向拉力作用会降低斜桩的水平刚度和极限承载力;而轴向压力作用则会使其水平刚度和极限承载力提高。基于桩侧浅层土体楔形破坏假定,推导了考虑轴向荷载影响的斜桩水平极限土抗力计算公式,提出了桩侧土抗力的p-y曲线方法,并通过模型试验及现场试验验证其合理性。 相似文献
8.
注浆成型螺纹桩为一种利用施工工艺创新,结合钻孔灌注和二次注浆技术的新型螺纹抗拔桩型,目前已在软土地区开展应用。为了对其受力承载特性深入研究,使该桩型得到广泛推广,通过数值分析方法对其抗拔性能和承载机制进行了三维有限元数值模拟。首先,通过数值模拟桩-土界面室内大型直剪试验得到了有限元分析需要的桩-土接触面参数,而后将得到的参数带入注浆成型螺纹桩抗拔三维有限元数值模型,通过计算得到了不同距径比S/D（即螺距与桩径的比值）螺纹桩的抗拔荷载-位移曲线和轴力分布,并观察了抗拔过程中桩周土体塑性变形的发展。数值分析表明,螺纹桩与桩周土体的机械咬合作用增大了桩侧摩阻力,从而使桩体极限抗拔承载力较等截面圆桩提高约2～5倍;同时,其承载能力与桩体的S/D有关,当S/D取最优时,荷载-位移曲线的初始切向刚度最大,极限承载力最高,桩周土体形成的连续拱形破坏区域最大。 相似文献
9.
The pile-to-pile interaction was obtained for vertically loaded piles embedded in homogeneous poroelastic saturated soil. Deduced from Biot’s theory, the fundamental functions of the quasi-static development for the force, displacement and pore pressure were acquired in cylindrical coordinates. The pile–soil system was decomposed into extended soil and fictitious piles, and the compatibility condition was set up between the axial strain of the fictitious piles and the corresponding average strain over the extended soil. This approach results in the governing equations, which consist of the Fredholm integral equations of the second kind and the basic unknowns of the axial forces along the fictitious pile shaft. The axial force and settlement along the pile shaft were calculated based on the axial forces of the fictitious piles. The interaction between the piles was investigated under different consolidation conditions through a two-pile model, and two pile interaction factors were obtained. Stemming from the two-pile analysis, numerical analyses on the settlement of the pile groups were conducted to probe pile interaction with consolidation. The conventional solutions for the single-phase soil-pile problem seem to underestimate the interaction factor if the consolidation effect is taken into account as pile settlement continues. The pile-to-pile interaction can also aggravate the percentage of consolidation settlement (PCS), and as the pile number increases, the value of the PCS will also increase. Several key factors, such as the pile stiffness, pile slenderness ratio and pile spacing, are investigated to better understand the impact of consolidation on pile analysis. 相似文献
10.
考虑沉桩效应对桩周土体力学特性的影响,采用指数函数型荷载传递曲线分别建立了静压桩的桩侧和桩端荷载传递模型。在此基础上,根据群桩加载过程中桩周土体的变形模式,基于荷载传递法描述桩-土界面的非线性行为,采用剪切位移法考虑群桩之间的相互作用,提出了考虑沉桩效应的群桩非线性荷载-沉降混合计算方法。通过开展离心模型试验对该计算方法解答进行了验证,研究了沉桩效应和桩-土界面非线性特征对群桩承载特性的影响。研究结果表明,沉桩效应对桩周土体起到挤密作用,使得桩周土体的强度和刚度增大,从而提高了群桩的承载特性。群桩加载过程中桩-土界面刚度随沉降变形而逐渐减小,使得群桩荷载-沉降曲线呈现出明显的非线性特征。 相似文献
11.
针对刚性筏板下群桩基础优化设计问题进行分析,通过改变桩长分布来调整各桩的荷载分担,群桩分析采用基于弹性理论的积分方程方法,并通过cut-off方法来反映桩的弹塑性特性,实现群桩基础的弹塑性优化分析,改进了常规弹性分析方法的缺陷。算例分析表明,随着外荷载的不断增加,角桩首先达到极限荷载,对角桩超出极限荷载的部分进行重新分布,继而使得边桩逐渐达到极限承载状态,继续加载直至内桩也达到极限承载状态,从而引起桩筏基础的整体破坏。采用cut-off方法可以改进基础变刚度优化设计,使之与实际情况更为吻合。 相似文献
12.
Numerical pile segment analysis is conducted in this study with an advanced soil model to investigate the skin friction behaviour of a drilled Cast‐In‐Place (CIP) pile installed in sand. Although the interface between the sand and pile is considered rough, thin elements adjacent to the pile are used to include effects of localized shear. Unit weights of fluid concrete and accompanied changes in stress are considered as the effects of pile installation. Changes in effective stresses are the most prominent effect due to pile installation with a change in direction of the major principal stress from the vertical to the radial direction. Shear behaviour of the sand at the interface during the early shear stage is related to the contractive tendency of the sand at small strain levels. Changes in the stress field around the pile with little changes in volumetric strain take place during the early shear stage. Stress redistributions during the early shear stage depend on the direction of the major principal stress before shear. Results of the pile segment analyses for drilled CIP piles show good agreement with design methods. Parametric studies are used to characterize the effects of sand density and pile diameter on the skin friction behaviour of drilled CIP piles. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
13.
14.
This paper presents a three‐dimensional finite element analysis of the response of battered piles to the combined lateral and vertical pullout loads. Analyses are carried out using an elastoplastic constitutive law based on the non‐associated Mohr–Coulomb criterion. The influence of the contact condition at the pile–soil interface is also investigated. Analyses show that the load's inclination with regard to the pile's axis affects both the lateral and axial response of the battered piles. Analyses also show that the pullout capacity of battered piles is affected by the pile's inclination regarding the vertical axis as well as the load's inclination regarding the pile's axis. The investigation of the influence of the contact condition at the soil–pile interface shows that the possibility of sliding at the soil–pile interface affects the response of battered piles subjected to loads with low inclination regarding the pile's axis. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
15.
This article revisits the influences of axial load on the lateral response of single pile with integral equation method. The problem is formulated by decomposing the pile soil system into an extended elastic soil and a fictitious pile, the former of which is analyzed by making use of the fundamental Mindlin's solution for a concentrated horizontal load whereas the latter is modeled by the conventional beam bending theory. According to the rotation compatibility condition between the fictitious pile and the extended soil, a Fredholm integral equation of the second kind is established with the shear strain and rotation angle of the fictitious pile being the basic unknowns. The bending moment and displacement distribution along the pile are subsequently obtained. Comparison with existing solutions validates the accuracy and applicability of the present formulation. The results of parametric analysis indicate that the influences of axial load on the lateral response of single piles could be significant, and in general, the bending moment and horizontal displacement distributions along the pile increase considerably with the increase of axial load. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
16.
Three dimensional elasto‐plastic interface for embedded beam elements with interaction surface for the analysis of lateral loading of piles 
下载免费PDF全文
下载免费PDF全文 This paper presents a numerical formulation for a three dimensional elasto‐plastic interface, which can be coupled with an embedded beam element in order to model its non‐linear interaction with the surrounding solid medium. The formulation is herein implemented for lateral loading of piles but is able to represent soil‐pile interaction phenomena in a general manner for different types of loading conditions or ground movements. The interface is formulated in order to capture localized material plasticity in the soil surrounding the pile within the range of small to moderate lateral displacements. The interface is formulated following two different approaches: (i) in terms of beam degrees of freedoms; and (ii) considering the displacement field of the solid domain. Each of these alternatives has its own advantages and shortcomings, which are discussed in this paper. The paper presents a comparison of the results obtained by means of the present formulation and by other well‐established analysis methods and test results published in the literature. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
17.
A finite element model for pile‐driving analysis is developed and used to investigate the behaviour of pre‐bored piles, which are then driven the last 1.25 or 2.25 m to their final design depth. The study was conducted for the case of saturated clays. The model traces the penetration of the pile into the soil and accommodates for large deformations. The non‐linear behaviour of the clay in this study is predicted using the bounding‐surface‐plasticity model, as applied to isotropic cohesive soils. The details of the 3‐D numerical modelling and computational schemes are presented. A significant difference was observed in the pile displacement during driving, and in the computed soil resistance at the pile tip, particularly at the earliest driving stages. No difference in soil resistance at the soil pile interface along the pile shaft was detected between the pre‐bored piles whether driven 1.25 or 2.25 m. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
18.
Y. K. Chow 《国际地质力学数值与分析法杂志》1987,11(6):621-638
A numerical method of analysis based on elasticity theory is presented for the analysis of axially and laterally loaded pile groups embedded in nonhomogeneous soils. The problem is decomposed into two systems, namely the group piles acted upon by external applied loads and pile–soil interaction forces, and a layered soil continuum acted upon by a system of pile–soil interaction forces at the imaginary positions of the piles. The group piles are discretized into discrete elements while the nonhomogeneous soil behaviour is determined from an economically viable finite element procedure. The load–deformation relationship of the pile group system is then determined by considering the equilibrium of the pile–soil interaction forces, and the compatibility of the pile and soil displacements. The influence of soil nonlinearity can be studied by limiting the soil forces at the pile–soil interface, and redistributing the ‘excess forces’ by an ‘initial stress’ process popular in elasto-plastic finite element analysis. The solutions from this approach are compared with some available published solutions for single piles and pile groups in homogeneous and nonhomogeneous soils. A limited number of field tests on pile groups are studied, and show that, in general, the computed response compares favourably with the field measurements. 相似文献
19.
软土地层桥梁群桩基础桩土共同作用性状的非线性有限元分析 总被引：2，自引：0，他引：2
通过对某高速铁路特大桥群桩基础进行三维非线性有限元分析,并结合现场试验得出的规律进行相应的对比分析,研究了软土地层桥梁群桩基础桩身轴力、桩侧摩阻力、基底土体附加应力、孔隙水压力分布、超孔隙水压力消散和群桩基础荷载沉降规律。计算结果表明,基桩所承受的轴力,角桩＞边桩＞中心桩,角桩和边桩的轴力沿桩身减小的幅度较大,而中心桩的轴力沿桩身减小的幅度稍小;各基桩桩侧摩阻力的发挥情况,侧摩阻力值总体上呈角桩＞边桩＞中心桩,相对滑移量基本呈上大下小的形态,即桩身上部桩-土之间产生的相对滑移量较中下部要大;外荷载作用下产生的土体附加应力和超孔隙水压力主要集中在承台底以下土体的一定范围内,其衰减梯度沿深度方向逐渐降低,随着固结时间的延长,群桩基础沉降达到稳定。 相似文献
20.
基于荷载传递法,建立了热力耦合作用下能量桩单桩工作特性的简化分析方法。该方法中将桩-土荷载传递函数取为双曲线,采用曼辛法则模拟温度循环过程中桩-土界面的卸载和再加载特性,通过再加载过程中刚度的折减近似考虑塑性变形的积累。利用矩阵位移法求解控制方程组后可直接得到任意温度-力学组合作用下的桩体变形、桩身轴力、桩侧阻力和桩端阻力,无需事先假设温度位移零点的位置。通过与试验数据的对比分析,验证了所提方法的可靠性。结合算例,研究了能量桩的长期工作特性。结果表明,温度循环会造成自由桩的桩顶沉降增加,固定桩的桩顶应力减小,温度循环的影响与桩顶静力荷载水平和土体刚度的衰减程度密切相关。 相似文献