共查询到20条相似文献，搜索用时 31 毫秒
1.
Geological and fluid inclusion studies of the Dongpo tungsten skarn ore deposit,China 总被引：1，自引：0，他引：1
The Dongpo tungsten ore deposit, the largest scheelite skarn deposit in China, is located at the contact of a 172-m. y. biotite
granite with a Devonian marble. The mineralization associated with the granite includes W, Bi-Mo, Cu-Sn and Pb-Zn ores. Several
W mineralization stages are shown by the occurrence of ore in massive skarn deposits and in later cross-cutting veins. The
high garnet/pyroxene ratio, the hedenbergite and diopside-rich pyroxene and the andradite-rich garnet show the deposit belongs
to the oxidized skarn type. Detailed fluid inclusion studies of granite, greisen, skarn and vein samples reveal three types
of fluid inclusion: (1) liquid-rich, (2) gas-rich and (3) inclusions with several daughter minerals. Type (3) is by far the
most common in both skarn and vein samples. The dominant daughter mineral in fluid inclusions is rhembic, highly birefringent,
and does not dissolve on heating even at 530°C. We assume that this mineral is calcite. The liquid phase in most of the fluid
inclusions has low to moderate salinities: 0–15 wt. %; in a few has higher salinities (30–40 wt. % NaCl equivalent). The homogenization
temperatures of inclusions in the skarn stage range from 350°C to 530°C, later tungsten mineralization-stage inclusions homogenize
between 200°C and 300°C, as do inclusions in veins. Fluid inclusions in granite and greisen resemble those of the late tungsten
mineralization stage, with low salinity and homogenization temperatures of 200°–360°C. The tungsten-forming fluids are probably
a mixture that came from biotite granite and the surrounding country rocks. 相似文献
2.
金沙江-红河富碱侵入岩带斑岩型铜、金矿床的成矿流体研究 总被引：1，自引：0，他引：1
对金沙江–红河富碱侵入岩带内的玉龙、北衙、铜厂–长安冲三个斑岩型铜、金矿床的流体包裹体进行了详细研究。三个矿床成矿阶段的流体包裹体类型主要有H_2O-NaCl气液两相包裹体,含钠盐、钾盐/方解石、金属子晶多相包裹体以及H_2O-CO_2包裹体。成矿期流体均一温度多在250~500℃之间,高者可达650℃及以上,盐度多在10%~50%NaCleq之间,成矿流体都具有高温、高盐度、富K、富CO_2的特点,显示典型的岩浆热液特征。并且,单个流体包裹体的成分分析也显示流体中除含有较高的成矿元素Cu、Mo、Pb、Zn等外,还含较高的K、Rb、Sr等元素,进一步证明成矿流体源自岩浆分异流体,且经历过从高温高盐度到高温中低盐度的演化。结合该区流体包裹体中广泛存在沸腾包裹体群的事实,进一步证实沸腾作用在斑岩型矿床中的普遍存在,并且说明其很可能是这些矿床金属元素沉淀的重要机制。 相似文献
3.
Alireza Zarasvandi Sassan Liaghat David Lentz Mahboobeh Hossaini 《Resource Geology》2013,63(2):188-209
The Darreh‐Zereshk (DZ) and Ali‐Abad (AB) porphyry copper deposits are located in southwest of the Yazd city, central Iran. These deposits occur in granitoid intrusions, ranging in composition from quartz monzodiorite through granodiorite to granite. The ore‐hosting intrusions exhibit intense hydrofracturing that lead to the formation of quartz‐sulfide veinlets. Fluid inclusions in hydrothermal quartz in these deposits are classified as a mono‐phase vapor type (Type I), liquid‐rich two phase (liquid + vapor) type (Type IIA), vapor‐rich two phase (vapor + liquid) type (Type IIB), and multi‐phase (liquid + vapor + halite + sylvite + hematite + chalcopyrite and pyrite) type (Types III). Homogenization temperatures (Th) and salinity data are presented for fluid inclusions from hydrothermal quartz veinlets associated with potassic alteration and other varieties of hypogene mineralization. Ore precipitation occurred between 150° to >600°C from low to very high salinity (1.1–73.9 wt% NaCl equivalent) aqueous fluids. Two stages of hydrothermal activity characterized are recognized; one which shows relatively high Th and lower salinity fluid (Type IIIa; Th(L‐V) > Tm(NaCl)); and one which shows lower Th and higher salinity (Type IIIb; Th(L‐V) < Tm(NaCl)). The high Th(L‐V) and salinities of Type IIIa inclusions are interpreted to represent the initial existence of a dense fluid of magmatic origin. The coexistence of Type IIIb, Type I and Type IIB fluid inclusions suggest that these inclusions resulted either from trapping of boiling fluids and/or represent two immiscible fluids. These processes probably occurred as the result of pressure fluctuations from lithostatic to hydrostatic conditions under a pressure of 200 to 300 bar. Dilution of these early fluids by meteoritic water resulted in lower temperatures and low to moderate salinity (<20 wt% NaCl equiv.) fluids (Type IIA). Fluid inclusion analysis reveals that the hydrothermal fluid, which formed mineralized quartz veinlets in the rocks with potassic alteration, had temperatures of ～500°C and salinity ～50 wt% NaCl equiv. Cryogenic SEM‐EDS analyses of frozen and decrepitated ore‐bearing fluids trapped in the inclusions indicate the fluids were dominated with NaCl, and KCl with minor CaCl2. 相似文献
4.
《International Geology Review》2012,54(5):457-473
Gold deposits in the Taihang Mountains, northern China, mainly consist of quartz sulfide veins in granitoid plutons. This paper describes the geological setting of the gold deposits, and presents the results of microthermometric, Fourier transform infrared spectra, and stable isotope analyses of ore—forming fluids for the purpose of examining the characteristics of these fluids. The ore—forming fluid was of high temperature (up to 380°C) and high salinity (33–41 wt% NaCl equiv.), represented by type I inclusions (with daughter minerals). This fluid evolved to low salinity at low temperatures recorded in type II (liquid-rich) and III inclusions (vapor—rich). Primary type II inclusions coexist with type III inclusions in quartz. Type III inclusions have almost the same homogenization temperatures as type II inclusions. This probably reflects boiling. The secondary fluid inclusions homogenized at lower temperatures, and have lower salinities than primary inclusions. Based on microthermometric data, we propose that the high—temperature fluid that separated from residual magma corresponded to the ore—forming fluid represented by type I inclusions. This fluid mixed with meteoric water in the upper part of the granitic pluton and was diluted. The diluted fluid boiled, probably due to abrupt pressure decrease, and formed liquid—rich type II inclusions and vapor—rich type III inclusions. The deposition of sulfide minerals and gold probably occurred during boiling. 相似文献
5.
The Daraloo field is located in the southeast of Iran (Kerman province). It is associated with Oligomiocene diorite/granodiorite to quartz monzonite stocks. Copper mineralization is basically relevant to potassic and phyllic alteration zones. Petrographic and geologic studies imply that mineralization is restricted to two major parts locating in the center and east of district. The larger central mineralization has a northwest–southeast trend perpendicular to the smaller one. Hydrothermal ore fluid formation occurred in relatively deep levels thereafter faulting and fracturing provided appropriate conduits to ascend fluids through shallower depths. Early hydrothermal alteration produced a confined potassic assemblage in the central and eastern parts of the stock. Two main fluid inclusion groups in relationship with alteration ore fluids have been identified. They are liquid-rich inclusions containing solid phases, with high temperatures (257°C to 554°C) and high salinities (31 to 67 wt.% NaCl equiv.), and vapor-rich inclusions with high temperatures and low salinities without any solid phases. These magmatic source fluids are responsible for boiling and also potassic and phyllic alteration zone. They also resulted in the formation of quartz groups I and II veins and chalcopyrite deposition. Propylitic alteration is attributed to a Ca-rich meteoric fluid. Inclusions originated from this fluid are liquid-rich having low temperatures (161°C to 269°C) and low salinities (1 to 13 wt.% NaCl). Mixing descending meteoric water with magmatic fluids reduces considerably the salinity of magmatic fluid. Mixing is also the impetus of leaching copper from potassic to the phyllic zone. It is possible to conclude that all these procedures are controlled by the main faults of district having NW–SE trend. Two fundamental events affecting the mineralization are cooling ore-bearing fluids and magnetite (±pyrite) emplacement. The latter one is formed in potassic and phyllic alteration zone in which copper-bearing fluids have interaction with magnetite minerals and so chalcopyrite minerals have been formed nearby magnetites. Temperature and pressure of hydrothermal fluid differentiation could be applied as a predictive tool to discriminate between barren and productive copper porphyry deposits. A simple comparison of temperature and pressure variations between Daraloo deposit and other copper porphyry deposits located in the same belt of Iran (Sahand-Bazman belt) illuminates that Daraloo system has high range of pressure implying deeper exsolution of hydrothermal fluid. On the other hand, economic mineralization has direct relationship with temperature range of orthomagmatic fluids so that if a deposit has a wide range of high temperature fluids, it could be inferred as a barren deposit. In conclusion, it could be inferred that Daraloo district can be categorized as a sub-economic porphyry deposit. On the other hand, restricted formation of chalcopyrite and the other copper-bearing minerals besides large amounts of magnetite and pyrite can approve obviously the low grade of mineralization in Daraloo district. 相似文献
6.
阿日特克山铜钼矿床位于柴北缘中北段,为近年来新发现的隐伏斑岩型矿床,矿体产出于海西晚期—印支期花岗闪长（斑）岩和古元古代达肯大坂岩群接触部位。为探讨该矿床成矿流体特征和成矿机制,本文对矿床野外地质特征、流体包裹体及稳定同位素组成进行了系统的研究。根据不同类型矿脉之间的相互关系,可将热液成矿期次划分为成矿早期石英阶段、成矿期辉钼矿-多金属硫化物-石英阶段和成矿晚期石英-方解石阶段。流体包裹体岩相学研究表明,阿日特克山铜钼矿床流体包裹体以Ⅰ型（富液相L+V两相水溶液包裹体）、Ⅱ型（富气相L+V两相水溶液包裹体）和Ⅲ型（含子矿物三相水溶液包裹体）为主。显微测温及包裹体拉曼光谱分析结果显示,成矿流体体系为中高温、中低盐度、中高密度的NaCl-H2O体系,至成矿晚期,流体性质变化为低温、低盐度、高密度流体,矿床形成深度为0.40~4.00 km。氢氧同位素分析测试结果显示,δDV-SMOW值为-92.9‰~-78.4‰,δ18OH2O值为-7.4‰~2.0‰,表明成矿流体以混合流体为主,随着成矿流体的演化,有更多的大气降水不断混入。矿石中金属硫化物δ34S值处于9.4‰~11.7‰之间,平均值为10.2‰,表现出明显的地层硫特征,为岩浆热液与围岩地层相互作用所致。综上认为,阿日特克山铜钼矿床为矽卡岩型-斑岩型矿床,形成于海西晚期—印支期俯冲碰撞构造环境,混合成矿流体强烈的不混溶作用为斑岩型铜钼矿床形成的主要机制。 相似文献
7.
Feng Yang Wei Zhai Xiaoming Sun Reiner Klemd Yanyan Sun Yunshan Wu Renmin Hua Siqi Zheng 《Resource Geology》2019,69(1):107-122
The Yaoling tungsten deposit is a typical wolframite quartz vein‐type tungsten deposit in the South China metallogenic province. The wolframite‐bearing quartz veins mainly occur in Cambrian to Ordovician host rocks or in Mesozoic granitic rocks and are controlled by the west‐north‐west trending extensional faults. The ore mineralization mainly comprises wolframite and variable amounts of molybdenite, chalcopyrite, pyrite, fluorite, and tourmaline. Hydrothermal alteration is well developed at the Yaoling tungsten deposit, including greisenization, silicification, fluoritization, and tourmalinization. Three types of primary/pseudosecondary fluid inclusions have been identified in vein quartz, which is intimately intergrown with wolframite. These include two‐phase liquid‐rich aqueous inclusions (type I), two‐ or three‐phase CO2‐rich inclusions (type II), and type III daughter mineral‐bearing multiphase high‐salinity aqueous inclusions. Microthermometric measurements reveal consistent moderate homogenization temperatures (peak values from 200 to 280°C), and low to high salinities (1.3–39 wt % NaCl equiv.) for the type I, type II, and type III inclusions, where the CO2‐rich type II inclusions display trace amounts of CH4 and N2. The ore‐forming fluids are far more saline than those of other tungsten deposits reported in South China. The estimated maximum trapping pressure of the ore‐forming fluids is about 1230–1760 bar, corresponding to a lithostatic depth of 4.0–5.8 km. The δDH2O isotopic compositions of the inclusion fluid ranges from ?66.7 to ?47.8‰, with δ18OH2O values between 1.63 and 4.17‰, δ13C values of ?6.5–0.8‰, and δ34S values between ?1.98 and 1.92‰, with an average of ?0.07‰. The stable isotope data imply that the ore‐forming fluids of the Yaoling tungsten deposit were mainly derived from crustal magmatic fluids with some involvement of meteoric water. Fluid immiscibility and fluid–rock interaction are thought to have been the main mechanisms for tungsten precipitation at Yaoling. 相似文献
8.
斑岩铜矿是主要的铜资源,是矿床研究和勘查的重要目标。斑岩铜矿按其与板块构造的关系可分为2种:俯冲带斑岩铜矿和碰撞造山带斑岩铜矿,它们在成矿流体方面有很多区别,其中较大的差别是碰撞造山带斑岩铜矿的钾化蚀变带比俯冲带斑岩铜矿的钾化蚀变带强得多,且范围也相对较宽。文章简述了这2种斑岩矿床的主要地质特征,着重从流体包裹体、蚀变作用和稳定同位素研究来探讨斑铜矿床成矿流体的主要特征,包括成矿流体的成分、形成温度和压力,氢、氧、碳和硫稳定同位素组成。这两种类型的斑岩铜矿中主要发育5种包裹体:M熔体包裹体;Ⅰ液体包裹体;Ⅱ气体包裹体;Ⅲ含子矿物的多相包裹体和CO2_H2O包裹体。Ⅱ类和Ⅲ类包裹体常共存,且均一温度相似,表明成矿流体经历了不混溶和沸腾作用。在Ⅲ类含子矿物的包裹体中发现了含金属硫化物(黄铜矿、黄铁矿)和氧化物(赤铁矿、磁铁矿)子矿物。在斑岩金矿和碰撞造山带的斑岩铜矿中出现CO2_H2O包裹体,在斑岩的斑晶和一些早期石英脉的石英中可见到熔体包裹体以及熔体_流体包裹体,它们代表斑岩岩浆的样品,说明斑岩铜矿的形成经历了岩浆和热液阶段。最近的研究表明,斑岩铜矿的初始流体是中等盐度和密度的岩浆流体。这种流体在上升过程中因压力释放而发生沸腾,形成气体包裹体和含子矿物的高盐度包裹体。 相似文献
9.
Abstract. The occurrence of a distinct type of multi-solid, highly-saline fluid inclusions, hosted in igneous quartz phe-nocrysts from the Llamo porphyry, in the Zaldivar porphyry copper deposit of northern Chile is documented. Total homoge-nization of the multi-solid type inclusions occurs at magmatic temperatures (over 750C), well above the typical temperatures of hydro thermal fluids (less than 600C) usually recorded in porphyry copper systems. The analysis of this type of fluid inclusions, using a combination of non-destructive microthermometry, Raman and PIXE techniques and the identification of daughter minerals by SEM method, indicates that the trapped fluid was a dense, complex chloride brine in which Cl, Na, K, Fe, Cu, and Mn are dominant. The high chlorine and metal contents indicate that the metals were separated from the crystallizing magma as homogeneous aqueous chloride-rich solutions that represent the primary magmatic fluids exsolved at high temperatures and depth during the crystallization of the parental intrusive.
The multi-solid type inclusion illustrates the mechanism by which ore components are sequestered from the crystallizing parental magma and concentrated in the exsolved magmatic aqueous fluids. These fluids are significant with respect to the origin of porphyry copper deposits, as they are responsible for the first enrichment of metals and represent the precursors of metal-bearing hydrothermal fluids in a porphyry copper system. 相似文献
The multi-solid type inclusion illustrates the mechanism by which ore components are sequestered from the crystallizing parental magma and concentrated in the exsolved magmatic aqueous fluids. These fluids are significant with respect to the origin of porphyry copper deposits, as they are responsible for the first enrichment of metals and represent the precursors of metal-bearing hydrothermal fluids in a porphyry copper system. 相似文献
10.
Suofei Xiong Mouchun He Shuzhen Yao Yubao Cui Guanzhong Shi Zhenju Ding Xinlu Hu 《Geological Journal》2015,50(6):720-738
The Chalukou giant Mo deposit in the Heilongjiang Province, northeastern China, is a porphyry deposit hosted in an intermediate‐felsic complex surrounded by Mesozoic volcano–sedimentary rocks. The mineralization process is composed of four stages, including quartz + K‐feldspar (Stage I), quartz + molybdenite (Stage II), pyrite + chalcopyrite + quartz ± other sulphides (Stage III) and carbonate ± fluorite ± quartz (Stage IV). The mineralization is generally associated with intense K‐feldspar‐, fluorite‐, phyllic‐ and propylitic alteration. Primary fluid inclusions (FIs) in quartz include four compositional types, i.e. pure carbonic (PC‐type), aqueous‐carbonic (C‐type), daughter mineral‐bearing (S‐type) and aqueous (W‐type) inclusions. Halite, sylvite and hematite are recognized as the daughter minerals in Stage I S‐type FIs, whereas molybdenite and chalcopyrite occur as daughter minerals in Stage II S‐type FIs. High‐salinity and high pressure (>220 MPa) FIs exist in Stage I quartz veins, characterized by homogenization through halite dissolution at temperatures of 324 to 517 °C. The paucity of coexisting vapour‐rich FIs with similar homogenization temperatures at this stage indicates that the initial S‐type inclusions have directly exsolved from the magma rather than boiling off of a low‐salinity vapour. Stage I quartz has captured the C‐ and W‐type FIs, which have totally homogenized at 270–530 °C with salinities of 1.6–17.0 wt.% NaCl equiv. At Stage II, the coexistence of all FI types were only observed at pressures of 150–218 MPa and temperatures of 352–375 °C, with two salinity clusters of 0.9–16.6 wt.% NaCl equiv. and 37–56 wt.% NaCl equiv. Stage III quartz contains W‐type FIs with homogenization temperatures of 158–365 °C, salinities of 0.5–9.0 wt.% NaCl equiv., and minimum pressures of 12–116 MPa; whilst Stage IV fluorite or calcite only contains W‐type FIs with homogenization temperatures of 121–287 °C, salinities of 0.5–5.3 wt.% NaCl equiv., and minimum pressures of 10–98 MPa. The estimated trapping pressure from Stages II to III suggests an alternating lithostatic–hydrostatic fluid‐system caused by fluid boiling. Ore fluids at the Chalukou Mo deposit may have been evolved from a CO2‐rich, high‐salinity, and high‐oxygen fugacity (fO2) magma system, to a CO2‐poor, low‐salinity, and low‐fO2 epithermal system. Two key points may have contributed to the formation of the Chalukou giant Mo deposit: The magmatic origin and fluid boiling that has resulted in decompression and rapid precipitation of metals. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
11.
Yunjin Tan 《中国地球化学学报》1985,4(1):18-32
The Lianhuashan porphyry tungsten deposit occurs in the coastal area of southeast China, where volcanic rocks are extensively developed. Its regional geology is related to the Benioff belt along the west Pacific Ocean during Mesozoic. Alteration-mineralization is genetically connected with quartz porphyry of Upper Jurassic age. The isochron age of the quartz porphyry was estimated at 135.8±7.3–137.8±2.4×106 yr, with an initial strontium ratio of 0.70668±0.00038. From the quartz porphyry outwards developed such alterations as potashalteration, phyllitization and propylitization. Tungsten mineralization occurs in the phyllitization zone. The mineral associations are characterized by the paragenesis of wolframite with scheelite, and high sulfides, especially pyrite, pyrrihotite and arsenopyrite. Stable isotope data are presented as follows: Evidence developed from fluid inclusions indicates that the temperature of alteration-mineralization ranges from 650° to 150°C. Ore fluids are high in salinity and rich in Cl. The geological-geochemical characteristics of the deposit permit a conclusion that the studied deposit is a porphyry-tungsten deposit. 相似文献
12.
13.
青海东昆仑卡尔却卡多金属矿区斑岩型铜矿的流体包裹体研究 总被引：18，自引：3，他引：15
卡尔却卡铜多金属矿床是青海省地质调查院于近几年在东昆仑西段祁漫塔格地区新发现的一个矿床,目前规模已达中型。文章通过对矿区西北部受岩体断裂破碎蚀变带控制的铜矿体中石英流体包裹体岩相学、显微测温和激光拉曼探针成分分析,表明铜矿化石英脉中发育气液两相、富气相、含子矿物三相、纯液相和纯气相5类包裹体;气液两相和含子矿物三相流体包裹体的盐度差异明显,但它们的均一温度比较一致(320~440℃),反映在成矿流体演化过程中发生了强烈的流体不混溶,对成矿起重要作用;流体包裹体气相成分主要为H2O和CO2,其次为CH4、N2、H2、H2S及烃类。综合流体包裹体研究和矿化、蚀变等地质特征,笔者认为矿区西北部矿化应为与高中温岩浆热液作用有关的斑岩型铜矿化,它与区内强烈发育的铜铅锌多金属矽卡岩矿化均为同一构造-岩浆作用的产物。 相似文献
14.
云南南秧田钨矿床流体包裹体特征及其意义 总被引：3，自引：0，他引：3
对南秧田矽卡岩型钨矿床的石英和石榴石流体包裹体的岩相学特征研究表明,与成矿有关的包裹体主要有3类:富液相、富气相和含子晶的多相包裹体。石英包裹体均一温度范围为232～337℃,盐度w(NaCl)=0.53%～9.98%;石榴石包裹体的均一温度范围为228～306℃,盐度w(NaCl)=6.45%～14.04%。激光拉曼探针分析表明,南秧田白钨矿的成矿流体中气相成分以H2O为主,含少量CO2、CH4、H2S和N2等气体,液相成分以H2O为主,属NaCl-H2O流体体系。成矿溶液的密度为0.72～0.87g/cm3,表明形成这种矽卡岩型矿床的成矿流体均属于中温、低盐度、低密度的流体。成矿压力为18～32MPa,成矿深度约为0.6～1.2km。石英包裹体水的δD为-72.16‰～-65.10‰,δ18O为7.98‰～8.45‰,钨矿床中硫化物δ34S为6.6‰。成矿流体主要来自燕山晚期的岩浆热液作用。 相似文献
15.
E. Yu. Anikina N. S. Bortnikov G. K. Klubnikin G. N. Gamyanin V. Yu. Prokof’ev 《Geology of Ore Deposits》2016,58(3):182-212
The succession of mineral assemblages, chemistry of gangue and ore minerals, fluid inclusions, and stable isotopes (C, O, S) in minerals have been studied in the Mangazeya silver–base-metal deposit hosted in terrigenous rocks of the Verkhoyansk Fold–Thrust Belt. The deposit is localized in the junction zone of the Kuranakh Anticlinorium and the Sartanga Synclinorium at the steep eastern limb of the Endybal Anticline. The deposit is situated at the intersection of the regional Nyuektame and North Tirekhtyakh faults. Igneous rocks are represented by the Endybal massif of granodiorite porphyry 97.8 ± 0.9 Ma in age and dikes varying in composition. One preore and three types of ore mineralization separated in space are distinguished: quartz–pyrite–arsenopyrite (I), quartz–carbonate–sulfide (II), and silver–base-metal (III). Quartz and carbonate (siderite) are predominant in ore veins. Ore minerals are represented by arsenopyrite, pyrite, sphalerite, galena, fahlore, and less frequent sulfosalts. Three types of fluid inclusions in quartz differ in phase compositions: two- or three-phase aqueous–carbon dioxide (FI I), carbon dioxide gas (FI II), and two-phase (FI III) containing liquid and a gas bubble. The homogenization temperature and salinity fall within the ranges of 367–217°C and 13.8–2.6 wt % NaCl equiv in FI I; 336–126°C and 15.4–0.8 wt % NaCl equiv in FI III. Carbon dioxide in FI II was homogenized in gas at +30.2 to +15.3°C and at +27.2 to 29.0°C in liquid. The δ34S values for minerals of type I range from–1.8 to +4.7‰ (V-CDT); of type II, from–7.4 to +6.6‰; and of type III, from–5.6 to +7.1‰. δ13C and δ18O vary from–7.0 to–6.7‰ (V-PDB) and from +16.6 to +17.1 (V-SMOW) in siderite-I; from–9.1 to–6.9‰ (V-PDB) and from +14.6 to +18.9 (V-SMOW) in siderite-II; from–5.4 to–3.1‰ (V-PDB) and from +14.6 to +19.5 (V-SMOW) in ankerite; and from–4.2 to–2.9‰ (V-PDB) and from +13.5 to +16.8 (V-SMOW) in calcite. The data on mineral assemblages, fluid inclusions, and ratios of stable isotopes allow us to speak about the formation of the Mangazeya deposit in relation to the activity of the hydrothermal–magmatic system. The latter combines emplacement of subvolcanic granitic stocks and involvement of fluids variable in salinity and temperature in ore deposition zone. The fluids released from crystallizing felsic magma and were formed in a convective cell by heating of meteoric and marine waters. The mechanism of ore deposition is related to phase separation (boiling) and mixing of fluids. 相似文献
16.
There are 10 types of tungsten ore deposits in South China: granite, porphyry, volcanic, pegmatite, skarn, greisen, wolframite-quartz ± microcline veins, stratabound, ferberite-quartz veins and placer. Most are chronologically related to Yenshanian granites. Integrated field, mineralogic, fluid inclusion and geochemical studies were undertaken to determine the characteristics and origin of the ores. Most of the tungsten ore deposits are also spatially related to Yenshanian granites. These granites include several intrusions, isotopically dated at 160–180 m. y. and 70–100 m. y. The concentration of trace elements, especially W Mo, Sn, Ta, Nb, Li, and F are relatively high in the granites. In the granites of South China, the average WO3 is 4.35 ppm, but in Yenshanian granites, which are the youngest of these, the average WO3 is 5.16 ppm. In the youngest of Yenshanian granites, a light mica-albite granite has been identified, whose average WO3 is as high as 242.3 ppm. From this line of evidence, the tungsten ore deposits in South China are considered to be genetically related to Yenshanian granites. Wolframite-sulfide-quartz veins and scheelite skarns provide the bulk of the reserves and production. There are many different kinds of alteration associated with the different tungsten ore deposits, but the principal ones are silicification, greisenization, potash-feldspathization and chloritization. Four types of fluid inclusions were found:
- Liquid-rich;
- Gas-rich;
- Liquid CO2-bearing;
- Polyphase with daughter minerals.
17.
Ore Genesis of the Lunwei Granite‐Related Scheelite Deposit in the Wuyi Metallogenic Belt,Southeast China: Constraints from Geochronology,Fluid Inclusions,and H–O–S Isotopes 
下载免费PDF全文
下载免费PDF全文 Hui Wang Chengyou Feng Yiming Zhao Mingyu Zhang Runsheng Chen Jinliang Chen 《Resource Geology》2016,66(3):240-258
A granite‐related scheelite deposit has been recently discovered in the Wuyi metallogenic belt of southeast China. The veinlet–disseminated scheelite occurs mainly in the inner and outer contact zones of the porphyritic biotite granite, spatially associated with potassic feldspathization and silicification. Re–Os dating of molybdenite intergrowths with scheelite yield a well‐constrained isochron age of 170.4 ± 1.2 Ma, coeval with the LA–MC–ICP–MS concordant zircon age of porphyritic biotite granite (167.6 ± 2.2 Ma), indicating that the Lunwei W deposit was formed in the Middle Jurassic (~170 Ma). We identify three stages of ore formation (from early to late): (I) the quartz–K‐feldspar–scheelite stage; (II) the quartz–polymetallic sulfide stage; and (III) the quartz–carbonate stage. Based on petrographic observations and microthermometric criteria, the fluid inclusions in the scheelite and quartz are determined to be mainly aqueous two‐phase (liquid‐rich and gas‐rich) fluid inclusions, with minor gas‐pure and CO2‐bearing fluid inclusions. Ore‐forming fluids in the Lunwei W deposit show a successive decrease in temperature and salinity from Stage I to Stage III. The homogenization temperature decreases from an average of 299 °C in Stage I, through 251 °C in Stage II, to 212 °C in Stage III, with a corresponding change in salinity from an average of 5.8 wt.%, through 5.2 wt.%, to 3.4 wt.%. The ore‐forming fluids have intermediate to low temperatures and low salinities, belonging to the H2O–NaCl ± CO2 system. The δ18OH2O values vary from 1.8‰ to 3.3‰, and the δDV‐SMOW values vary from –66‰ to –76‰, suggesting that the ore‐forming fluid was primarily of magmatic water mixed with various amounts of meteoric water. Sulfur isotope compositions of sulfides (δ34S ranging from –1.1‰ to +2.4‰) and Re contents in molybdenite (1.45–19.25 µg/g, mean of 8.97 µg/g) indicate that the ore‐forming materials originated mainly in the crust. The primary mechanism for mineral deposition in the Lunwei W deposit was a decrease in temperature and the mixing of magmatic and meteoric water. The Lunwei deposit can be classified as a porphyry‐type scheelite deposit and is a product of widespread tungsten mineralization in South China. We summarize the geological characteristics of typical W deposits (the Xingluokeng, Shangfang, and Lunwei deposits) in the Wuyi metallogenic belt and suggest that porphyry and skarn scheelite deposits should be considered the principal exploration targets in this area. 相似文献
18.
The composition of minerals from stratiform ores of the Lengshuikeng deposit, China was studied using contemporary techniques. Barite, enargite, and kutnohorite typical of postvolcanic mineralization have been identified for the first time at the studied deposit. The fluid inclusion study shows that the stratiform ore was formed at a temperature of 340?C140°C from homogeneous chloride solution with salinity of 0.2?C11.7 wt % NaCl equiv. The O and C isotopic compositions of carbonates from the stratiform ore allowed us to calculate the oxygen isotopic composition of the H2O and the carbon isotopic composition of the CO2 in the ore-forming fluid. The data on ore minerals, fluid inclusions in quartz, and stable O and C isotopes show that two or more fluids derived from different sources could have mixed during formation of the stratiform ores. 相似文献
19.
德兴铜厂斑岩铜矿成矿流体演化特征 总被引：1，自引：0，他引：1
为探讨成矿流体的特征和演化过程,对德兴铜厂斑岩铜矿床不同蚀变—矿化带石英细脉中的流体包裹体进行详细的岩相学观察、显微测温、显微激光喇曼探针工作.结果显示,德兴铜厂斑岩铜矿主要有三类流体包裹体:富液相包裹体(Ⅰ型),富气相包裹体(Ⅱ型)、多相包裹体(Ⅲ型);成矿早期的Ⅰ型包裹体,主成矿期的Ⅱ型和Ⅲ型包裹体,以及成矿晚期的Ⅰ型包裹体的平均均—温度和平均盐度分别为:481℃,8.1％; 410℃,1.2％;389℃,56％和215℃,3.1％;主成矿期的Ⅱ型和Ⅲ型包裹体的平均均—温度相近,但盐度相差很大,指示了沸腾作用的发生;从早期到晚期,成矿流体呈现温度降低,挥发分逸出的趋势. 相似文献
20.
邹平地区与火山岩浆热液作用有关的铜矿床主要可划分为2种类型：一类为斑岩-火山角砾岩型,另一类为浅成低温热液型;代表性矿床分别为王家庄斑岩一火山角砾岩型铜（钼）矿床和南洞子浅成低温热液型铜（金）矿床。流体包裹体研究表明：王家庄铜（钼）矿床成矿流体的均一化温度和盐度偏高,出现了富气相的两相水溶液包裹体、富液相的两相水溶液包裹体和含子晶的三相水溶液包裹体共存现象,加温后,富气相包裹体均一到气相,同期富液相包裹体均一到液相的特征,这表明成矿流体在形成和演化过程中曾发生过沸腾作用。南洞子铜（金）矿床成矿流体均一温度和盐度偏低,以上3种包裹体共存的现象不明显,说明成矿流体在形成和演化过程中沸腾作用不强。上述2类矿床矿化脉石英中的δ^18OH2O-δD投影点飘离岩浆水范围,参照流体包裹体研究结果,证明邹平地区与火山岩浆热8液作用有关的铜矿成矿流体主要来源于岩浆水,后期混人大气降水。相比之下,浅成低温热液铜矿成矿流体中的大气降水混入量多。 相似文献