共查询到20条相似文献，搜索用时 31 毫秒
1.
The 30 to 155 m thick Early Permian (Artinskian) Warchha Sandstone of the Salt Range, Pakistan is a conglomerate, sandstone and claystone succession within which seven lithofacies types (Gt, St, Sp, Sr, Sh, Fl and Fm) occur in a predictable order as repeated fining-upward cycles. Common sedimentary structures in the conglomerates and sandstones include planar and trough cross-bedding, planar lamination, soft sediment-deformed bedding, compound cosets of strata with low-angle inclined bounding surfaces and lags of imbricated pebbles. Structures in the finer-grained facies include desiccation cracks, raindrop imprints, caliche nodules and bioturbation. Groups of associated facies are arranged into nine distinct architectural elements (channels, gravel bars, sandy bedforms, downstream and laterally accreting barforms, sand sheets, crevasse splays, levees, floodplain units and shallow lakes), which is consistent with a fluvial origin for the succession. The types of architectural elements present and their relationship to each other demonstrate that the Warchha Sandstone preserves a record of a meandering river system that drained the northern margin of Gondwanaland. The dominance of fine-grained (floodplain) facies over gravel-grade (channel-base) facies and the widespread occurrence of large-scale lateral accretion elements supports the interpretation of a high-sinuosity, meandering fluvial system in which channel bodies accumulated via the lateral accretion of point bars but in which the active channels covered only a small part of a broad floodplain at any time instant. Although the regional and temporal distribution of these deposits is complex, in broad terms the lower part is dominated by stacked, multistorey channel bodies, whereas single-storey channel elements isolated in abundant fine-grained floodplain deposits dominate the middle and upper parts of the formation. 相似文献
2.
主要通过岩心观察、粒度分析、参数计算、录井及测井分析等手段,充分吸收国内外河流研究成果,结合研究区区域地质背景,总结出渤海湾盆地垦东凸起北坡新近系馆陶组上段沉积相模式。研究认为：馆上段为河流相沉积,从沉积物特征和平面形态角度可以将研究区馆上段河流理解为介于辫状河与曲流河之间的过渡河型。其平均河道弯曲度大于1.7,垂向层序表现为泥多砂少,具有曲流河的特征;但沉积层序顶部常直接覆盖河漫/洪泛平原沉积,特别是河道内砂坝发育造成河道分汊河,砂坝沉积物粒度特征反映的受洪水控制的震荡性特点而与曲流河有重要差别。作者借用在水利学界和地貌学界广为使用的分汊河概念,建立了馆上段沉积相模式,包括河床、堤岸、河漫/洪泛平原和废弃河道等4个亚相,其沉积物组成下粗上细的正韵律。其中,河道砂坝是其主要砂体,顶部常被洪泛平原直接覆盖;决口扇是仅次于河道砂坝的次要砂体。 相似文献
3.
4.
Exhumed channel sandstone networks within fluvial fan deposits from the Oligo-Miocene Caspe Formation, South-east Ebro Basin (North-east Spain) 总被引：1，自引：0，他引：1
JOSE L. CUEVAS MARTÍNEZ† LLUIS CABRERA PÉREZ† ALEX MARCUELLO‡ PAU ARBUÉS CAZO† MARIANO MARZO CARPIO† FABIA BELLMUNT‡ 《Sedimentology》2010,57(1):162-189
The Oligo‐Miocene Caspe Formation corresponds to the middle fluvial facies of the wider Guadalope‐Matarranya fluvial fan, located in the South‐east Ebro foreland basin (North‐east Spain). At the time of the Caspe Formation deposition, this sector of the Ebro basin underwent a very continuous, moderate sedimentation rate. Lithofacies comprise deposits from channellized and unchannellized flows. Channellized flow lithofacies form multi‐storey ribbon‐like sandstone bodies that crop out as extensive sandstone ridges belonging to exhumed channel networks. Width/thickness ratios of these channel‐fill bodies average close to six. Sinuosity is usually low (most common values around 1·1), although it can be high locally (up to 2). Thicknesses range from a few metres to 15 m. Unchannellized flow lithofacies form tabular bodies that can be ascribed to overbank deposits (levées, crevasse splays and fine‐grained floodplain deposits) and also to frontal lobes, although recognition of this last case requires exceptional outcrop conditions or geophysical subsurface studies. The unchannellized flow lithofacies proportion ranges from 75% to 97·8%. Methods applied to this study include detailed three‐dimensional architectural analysis in addition to sedimentological analysis. The architecture is characterized by an intricate network of highly interconnected ribbon‐like sandstone bodies. Such bodies are connected by three kinds of connections: convergences, divergences and cross‐cuttings. Although the Caspe Formation lithofacies and architecture resemble anastomosed channels (low topographic gradient, high preservation potential, moderate aggradation rate, high lateral stability of the channels, dominance of the ribbon‐like morphologies and high proportion of floodplain to channel‐fill sediments), an unambiguous interpretation of the channel networks as anastomosed or single threaded cannot be established. Instead, the observed architecture could be considered as the product of the complex evolution of a fluvial fan segment, where different network morphologies could develop. A facies model for aggrading ephemeral fluvial systems in tectonically active, endorheic basins is proposed. 相似文献
5.
Massimiliano Ghinassi Wojciech Nemec Mauro Aldinucci Slavomir Nehyba Volkan Özaksoy Francesco Fidolini 《Sedimentology》2014,61(4):952-977
The mode of channel‐bend transformation (i.e. expansion, translation, rotation or a combination thereof) has a direct bearing on the dimensions, shape, bedding architecture and connectivity of point‐bar sandstone bodies within a fluvial meander belt, but is generally difficult to recognize in vertical outcrops. This study demonstrates how the bend transformation mode and relative rate of channel‐floor aggradation can be deciphered from longitudinal outcrop sections aligned parallel to the meander‐belt axis, as a crucial methodological aid to the reconstruction of ancient fluvial systems and the development of outcrop analogue models for fluvial petroleum reservoirs. The study focuses on single‐storey and multi‐storey fluvial meander‐belt sandstone bodies in the Palaeogene piggyback Boyabat Basin of north‐central Turkey. The sandstone bodies are several hundred metres wide, 5 to 40 m thick and encased in muddy floodplain deposits. The individual channel‐belt storeys are 5 to 9 m thick and their transverse sections show lateral‐accretion bed packages representing point bars. Point bars in longitudinal sections are recognizable as broad mounds whose parts with downstream‐inclined, subhorizontal and upstream‐inclined bedding represent, respectively, the bar downstream, central and upstream parts. The inter‐bar channel thalweg is recognizable as the transition zone between adjacent point‐bar bedsets with opposing dip directions into or out of the outcrop section. The diverging or converging adjacent thalweg trajectories, or a trajectory migrating in up‐valley direction, indicate point‐bar broadening and hence channel‐bend expansion. A concurrent down‐valley migration of adjacent trajectories indicates channel‐bend translation. Bend rotation is recognizable from the replacement of a depositional riffle by an erosional pool zone or vice versa along the thalweg trajectory. The steepness of the thalweg trajectory reflects the relative rate of channel‐floor aggradation. This study discusses further how the late‐stage foreland tectonics, with its alternating pulses of uplift and subsidence and a progressive narrowing of the basin, has forced aggradation of fluvial channels and caused vertical stacking of meander belts. 相似文献
6.
通过研究构造背景、野外露头、岩性组合、沉积构造、古生物特征和测井曲线特征,分析和总结鄂尔多斯盆地白垩系洛河组至环河华池组沉积相、相带分布范围和沉积特征。洛河组主要沉积了冲积扇相、风成沉积相、辫状河相和沙漠相;而在环河华池组主要沉积了湖相、三角洲相、曲流河相及风成砂岩夹层。平面上沉积相带的变化规律性较强,由盆地边缘的冲积相、冲积—河流相砾岩向盆内渐变为河流相—滨浅湖—半深湖相泥岩。沉积特征受构造运动影响和沉积相带控制,洛河组是从山缘向盆地内砂岩厚度迅速变薄、尖灭;环河华池组岩性变化表现为北粗南细、东粗西细,在北部砂体呈现东薄西厚,东北向西南增厚,在南部砂体呈近南北向展布,东薄西厚,南薄北厚。 相似文献
7.
主要通过岩心观察、粒度分析、参数计算、录测井分析等手段,充分吸收国内外河流研究成果,结合研究区区域地质背景,揭示垦东凸起北坡馆上段沉积相模式。得到以下认识：研究区馆上段地层为河流相沉积,从沉积物特征和平面形态角度可以将研究区馆上段河流沉积理解为介于辫状河及曲流河之间的过渡河型。其平均河道弯曲度大于1.7,垂向层序表现为泥多砂少,具有曲流河的特征;但沉积层序顶部常直接覆盖河漫/洪泛平原沉积,特别是河道内砂坝发育造成河道分汊河,砂坝沉积物粒度特征反映受洪水控制的震荡性特点而与曲流河有重要差别。本文借用在水利学界和地貌学界广为使用的分汊河概念建立了研究区馆上段沉积相模式,包括河床、堤岸、河漫/洪泛平原、废弃河道等4个亚相,组成下粗上细的正旋回。其中,河道砂坝是其主要砂体,顶部常被洪泛平原直接覆盖;决口扇是仅次于河道砂坝的第二大砂体。 相似文献
8.
野外地质露头为精细刻画沉积体内部结构、建立准确地下地质模型发挥着重要作用。以鄂尔多斯盆地延河剖面长7段为例,采用岩石学、野外露头沉积学方法,详细剖析了湖泊细粒沉积的岩相类型、特征、垂向组合及沉积环境。研究结果表明,延河剖面长7段发育平行层理细砂岩相、流水交错层理细砂岩相、浪成交错层理粉砂岩相、沙纹层理粉砂岩相、变形层理粉砂岩相、水平层理(泥质)粉砂岩相、块状泥岩相、水平层理(砂质)泥岩相、水平纹层页岩相9种岩相类型。在结合区域地质特征基础上,研究认为长7段为远源的曲流河三角洲前缘和浅湖-半深湖沉积,进一步细分出7类沉积单元,其中水下分支河道、支流间湾较为发育,水下天然堤、远砂坝、席状砂发育规模较小,浅湖-半深湖沉积只在长72段下部发育,河口坝基本不发育,仅局部可见。对各沉积单元的垂向分布特征进行深入研究,识别出Ⅰ、Ⅱ、Ⅲ、Ⅳ 4类垂向分布形式,其中Ⅰ、Ⅱ组合主要分布在研究区长71、长73亚段,Ⅲ、Ⅳ组合主要分布在研究区长72亚段。剖面相分析表明,长7沉积期整体为一套先变细、再变粗的细粒沉积序列,为曲流河三角洲前缘沉积—浅湖-半深湖沉积—曲流河三角洲前缘沉积。 相似文献
9.
Sheetflow fluvial processes in a rapidly subsiding basin, Altiplano plateau, Bolivia 总被引：2，自引：0，他引：2
Although facies models of braided, meandering and anastomosing rivers have provided the cornerstones of fluvial sedimentology for several decades, the depositional processes and external controls on sheetflow fluvial systems remain poorly understood. Sheetflow fluvial systems represent a volumetrically significant part of the non‐marine sedimentary record and documented here are the lithofacies, depositional processes and possible roles of rapid subsidence and arid climate in generating a sheetflow‐dominated fluvial system in the Cenozoic hinterland of the central Andes. A 6500 m thick succession comprising the Late Eocene–Oligocene Potoco Formation is exposed continuously for >100 km along the eastern limb of the Corque syncline in the high Altiplano plateau of Bolivia. Fluvial sandstone and mudstone units were deposited over an extensive region (>10 000 km2) with remarkably few incised channels or stacked‐channel complexes. The Potoco succession provides an exceptional example of rapid production of accommodation sustained over a prolonged period of time in a non‐marine setting (>0·45 mm year−1 for 14 Myr). The lower ≈4000 m of the succession coarsens upward and consists of fine‐grained to medium‐grained sandstone, mudstone and gypsum deposits with palaeocurrent indicators demonstrating eastward transport. The upper 2500 m also coarsens upward, but contains mostly fine‐grained to medium‐grained sandstone that exhibits westward palaeoflow. Three facies associations were identified from the Potoco Formation and are interpreted to represent different depositional environments in a sheetflow‐dominated system. (i) Playa lake deposits confined to the lower 750 m are composed of interbedded gypsum, gypsiferous mudstone and sandstone. (ii) Floodplain deposits occur throughout the succession and include laterally extensive (>200 m) laminated to massive mudstone and horizontally stratified and ripple cross‐stratified sandstone. Pedogenic alteration and root casts are common. (iii) Poorly confined channel and unconfined sheet sandstone deposits include laterally continuous beds (50 to >200 m) that are defined primarily by horizontally stratified and ripple cross‐stratified sandstone encased in mudstone‐rich floodplain deposits. The ubiquitous thin‐sheet geometry and spatial distribution of individual facies within channel sandstone and floodplain deposits suggest that confined to unconfined, episodic (flash) flood events were the primary mode of deposition. The laterally extensive deposition and possible distributary nature of this sheetflow‐dominated system are attributed to fluvial fan conditions in an arid to semi‐arid, possibly seasonal, environment. High rates of sediment accumulation and tectonic subsidence during early Andean orogenesis may have favoured the development and long‐term maintenance of a sheetflow system rather than a braided, meandering or anastomosing fluvial style. It is suggested here that rapidly produced accommodation space and a relatively arid, seasonal climate are critical conditions promoting the generation of sheetflow‐dominated fluvial systems. 相似文献
10.
The Raniganj Formation (late Permian) forms the uppermost economic coal-bearing unit of the Gondwana succession. The dominant facies interpreted from analysis of cores from the Raniganj formation are classified as Sandstone dominated facies, Sandstone - shale heterolith facies, Shale facies and Coal facies. The natural Gamma response of Raniganj Formation shows predominance of repetitive fining upwards cycles. Integration of core analysis and geophysical log data of the Raniganj formation indicates meandering fluvial environment. The lower part of Raniganj Formation is channel dominated which corresponds to thick amalgamated sand bodies while the upper part represent overbank shows predominance of channel avulsion indicating a gradual change in accommodation space. Five major fining upward depositional sequences, bounded by sub-aerial unconformities (sequence boundaries) have been dentified in Raniganj formation, based on changes in depositional style that are correlated regionally. Each sequence comprises of Low accommodation system tract (LAST) at base and high accommodation system tract (HAST) at top. LAST is characterized by vertically stacked, multistory amalgamated channel sandstone dominated facies, while floodplain dominated facies characterize HAST. The coal seams deposited in LAST are thicker and relatively more continuous than the frequent thin seams of HAST. Such facies distribution study would be helpful for the development strategy for CBM blocks based on production priority. 相似文献
11.
Numair A.Siddiqui Mu.Ramkumar Abdul Hadi A.Rahman Manoj J.Mathew M.Santosh Chow W.Sum David Menier 《地学前缘(英文版)》2019,10(3):957-971
Advances in photogrammetry have eased the acquisition of high-resolution digital information from outcrops, enabling faster, non-destructive data capturing and improved reservoir modeling. Geocellular models for flow dynamics with in the virtual outcrop in siliciclastic deposits at different sets of sandstone facies architecture remain, however, a challenge. Digital maps of bedding, lithological contrast, spatial-temporal variations of bedding and permeability characteristics make it more easy to understand flow tortuosity in a particular architecture. An ability to precisely model these properties can improve reservoir characterization and flow modeling at different scales. Here we demonstrate the construction of realistic 2 D sandstone facies based models for a pragmatic simulation of flow dynamics using a combination of digital point clouds dataset acquired from LiDAR and field investigation of the Sandakan Formation, Sabah, Borneo.Additionally, we present methods for enhancing the accuracy of outcrop digital datasets for producing high resolution flow simulation. A well-exposed outcrop from the Sandakan Formation, Sabah, northwest Borneo having a lateral extent of 750 m was chosen in order to implement our research approach. Sandstone facies and its connectivity are well constrained by outcrop observations, data from air-permeability measurements, bilinear interpolation of permeability, grid construction and water vector analysis for flow dynamics.These proportions were then enumerated in terms of static digital outcrop model(DOM) and facies model based on sandstone facies bedding characteristics. Flow simulation of water vector analysis through each of the four sandstone facies types show persistent spatial correlation of permeability that align with either cross-bedded orientation or straight with more dispersion high quality sandstone(porosity 21.25%-41.2%and permeability 1265.20-5986.25 mD) and moderate quality sandstone(porosity 10.44%-28.75% and permeability 21.44-1023.33 mD). Whereas, in more heterolithic sandstone(wavy-to flaser-bedded and bioturbated sandstone), lateral variations in permeability show spatially non-correlated patterns over centimeters to tens of meters with mostly of low quality sandstone(porosity 3.4%-12.31% and permeability < 1 mD to 3.21 mD). These variations reflect the lateral juxtaposition in flow dynamics. It has also been resulted that the vertical connectivity and heterogeneities in terms of flow are mostly pragmatic due to the interconnected sandstone rather than the quality of sandstone. 相似文献
12.
13.
EDWIN ROBERT SCHOMACKER AUDUN VESTHEIM KJEMPERUD JOHAN PETTER NYSTUEN JENS SIGURD JAHREN 《Sedimentology》2010,57(4):1069-1087
Sandstone bodies in the Sunnyside Delta Interval of the Eocene Green River Formation, Uinta Basin, previously considered as point bars formed in meandering rivers and other types of fluvial bars, are herein interpreted as delta mouth‐bar deposits. The sandstone bodies have been examined in a 2300 m long cliff section along the Argyle and Nine Mile Canyons at the southern margin of the Uinta lake basin. The sandstone bodies occur in three stratigraphic intervals, separated by lacustrine mudstone and limestone. Together these stratigraphic intervals form a regressive‐transgressive sequence. Individual sandstone bodies are texturally sharp‐based towards mudstone substratum. In proximal parts, the mouth‐bar deposits only contain sandstone, whereas in frontal and lateral positions mudstone drapes separate mouth‐bar clinothems. The clinothems pass gradually into greenish‐grey lacustrine mudstone at their toes. Horizontally bedded or laminated lacustrine mudstone onlaps the convex‐upward sandstone bars. The mouth‐bar deposits are connected to terminal distributary channel deposits. Together, these mouth‐bar/channel sandstone bodies accumulated from unidirectional jet flow during three stages of delta advance, separated by lacustrine flooding intervals. Key criteria to distinguish the mouth‐bar deposits from fluvial point bar deposits are: (i) geometry; (ii) bounding contacts; (iii) internal structure; (iv) palaeocurrent orientations; and (v) the genetic association of the deposits with lacustrine mudstone and limestone. 相似文献
14.
渤海海域S油田新近系明化镇组河流相复合砂体叠置样式分析 总被引：2，自引：0，他引：2
河流相砂体是我国陆相盆地最主要的油气储集层之一,随着90年代渤海海域浅层河流相油气勘探获得重大突破,使得河流相储层成为当前海上油田研究的热点。本文利用野外露头、现代沉积和岩芯以及钻测井等资料,以高分辨率层序地层学原理为指导,在精细的层序地层格架基础上,分析S油田新近系明化镇组明下段河流相层序格架和砂体结构的沉积特征,总结砂体的发育规模特征。建立河流相砂体的沉积模式,将明下段划分为38个五级层序、13个四级层序和4个三级层序;在层序格架内把河流相砂体叠置样式划分为3种类型共7类样式,分别为堆叠型、侧叠型和孤立型,和紧密接触侧叠型、疏散接触侧叠型、离散接触侧叠型、下切侵蚀河道孤立型、决口扇孤立型、孤立河道和堆叠构型7类样式。河流相砂体叠置样式的建立推动了陆相高分辨率层序学的发展。 相似文献
15.
Westphalian B (Duckmantian) alluvial Coal Measures along the Northumberland coast, NE England, comprise coal-capped coarsening-upward crevasse-splay sequences of shale, siltstone and sandstone, interbedded with a number of major distributary channel sandbodies, including the Table Rocks Sandstone. Lithofacies, architectural analysis and outcrop geometries divide the Table Rocks Sandstone into flaggy sandstone, massive sandstone, heterolithic, and mudstone facies associations, each comprising up to 7 lithofacies types. The three sandy facies associations are characterised by lenticular bed geometries on different scales producing a hierarchy of lensoid packages and associated bounding surfaces, all showing typical offset stacking patterns: (1) lenses, represent individual lenticular cross-bed sets, bounded by 1st order surfaces; (2) packages of lenses, called lens clusters are bounded by 2nd order surfaces, and are the basic architectural building block of the sandy facies associations; and (3) vertically stacked lens clusters called amalgamated lens clusters, bounded by 3rd order surfaces. The Table Rocks sandbody has a laterally extensive, irregular, lobate subsurface plan geometry, it displays a radial palaeocurrent pattern with 180° dispersion, and it forms part of a 14-m thick coarsening-upward regressive sequence. It is interpreted as a composite, lobate crevasse-splay delta system that prograded into a shallow interdistributary fresh to brackish water lake up to 14 m deep. The shallow lake water, fluvial input, and extensive development of traction structures such as cross-bedding and ripple cross-lamination suggests a friction-dominated delta, in which the four facies associations can be interpreted in terms of discrete elements of the mouth bar environment. The flaggy sandstone facies association represents the main, axial part of the mouth bar system, the erosively based massive sandstone facies association major subaqeous distributary channels, the lithologically more variable heterolithic facies association the medial mouth bar, and the mudstone facies association the distal mouth bar fringe and prodelta. Within this environmental setting amalgamated lens clusters are interpreted as small, discrete mouth bar sand lobes, whose offset, imbricate stacking pattern reflects channel spacing and bifurcation, the rate of channel shifting, or shallow depths and lack of accommodation space. Thus, lens clusters are interpreted as discrete growth elements of the mouth bar sand lobes, and lenses as individual bedforms making up these growth elements. Because of the high rate of channel shifting, lack of extensive erosion of the mouth bar lobes, and deposition of low discharge fines, the lobes retained much of their original depositional geometry, thereby providing advantageous gradients for offset deposition and stacking of adjacent sand lobes. Although the delta complex was maintained by frequent crevassing from the feeder channel, and by subsidence due to contemporaneous compaction and/or local tectonism, it was deeply incised on two occasions by subaqeous channels in response to high magnitude floods or falling lake level. 相似文献
16.
沉积体系分析与河道砂岩型铀矿成矿条件讨论--以鄂尔多斯中新生代盆地东胜地区为例 总被引：28，自引：5，他引：28
本运用沉积体系理论，对东胜地区直罗组的沉积相及沉积体系归属进行系统分析，指出直罗组为河流相沉积，其河流演化经历了早期辫状河、中期低弯度曲流河和晚期高弯度曲流河3个阶段。根据气候演变特点将直罗组分为上、下两个岩性段：下段为温湿条件下的辫状河沉积和低弯度曲流河沉积，形成灰色沉积建造；上段为干旱炎热条件下的曲流河沉积，形成以红色为主的杂色沉积建造。本区铀矿化属河道砂岩型，矿化受辫状河道控制，主要赋存于辫状河沉积砂体中。同时，对河道砂岩型铀矿化的成矿条件进行了初步探讨。 相似文献
17.
Architecture of fluvial-dominated valley-fill deposits in the Cretaceous Fall River Formation 总被引：1，自引：0，他引：1
BRIAN J. WILLIS 《Sedimentology》1997,44(4):735-757
The Fall River Formation is a 45 m thick layer of fluvial-dominated valley-fills and shore-zone strata deposited on the stable cratonic margin of the Cretaceous Western Interior Seaway. Fall River deposits in Red Canyon, in the south-west corner of South Dakota (USA), expose a cross-section of a 3.5 km wide valley-fill sandstone and laterally adjacent marine deposits. The marine deposits comprise three 10 m thick upward-shoaling sequences; each composed of multiple metres-thick upward-coarsening successions. The lower two of these sequences are laterally cut by the valley-fill sandstone, and are capped by metres-thick muddy palaeosols. The upper sequence spans the top of the valley-fill sandstone, and is overlain by the Skull Creek Shale. The 30 m thick valley sandstone is partitioned into four distinct fills by major erosion surfaces, and each of these fills contain many metres-thick channel-form bodies. Deposits in the lower parts of these fills are sheet-like, top-truncated channel bodies, whereas deposits in the upper parts of fills are upward-concave, laterally amalgamated channel bodies, more completely preserved heterolithic channel bodies, or wave-deposited sheets. Each valley-fill basal erosion surface records an episode of valley incision and relative sea-level fall, and the gradual progression from fluvial to more estuarine deposits upwards within each fill records relative sea-level rise. All fills are dominantly channel deposits and are capped by marine flooding surfaces. The dominance of channel deposits, the gradual change to more estuarine facies in the upper parts of fills, and the location of flooding surfaces at valley-fill tops all suggest that sediment supply initially kept pace with relative sea-level rise and valleys filled during late marine lowstand and transgression, not during subsequent highstands. Recently proposed facies models have focused on variations in the relative strength of tide, wave and river currents as controls on valley-fill deposits. However, relative rates of sediment supply and basin accommodation change, and the shift in this ratio along the depositional profile during multiple-scale cycles in relative sea-level, are equally important controls on the style of valley-fill deposits. 相似文献
18.
据新的地层划分方案及大量钻井、露头和岩心资料,详细研究了鄂尔多斯盆地华池地区延安组延9油层组（Y9）沉积体系特征及演化,认为延9油层组主要为河流沉积,是延10油层组的继承与发展,发育有辫状河、辫状型曲流河和网状河3种类型的河流。Y39油层是辫状河发育的油层,Y29油层在继承Y39油层河流的基础上发育辫状型曲流河,Y19油层则是在前两期逐渐填平补齐之后,在准平原条件下发育的网状河沉积。华池地区延9油层组发育辫状河-辫状型曲流河和网状河两种河流沉积模式。 相似文献
19.
中国现代网状河流沉积特征和沉积模式 总被引：5，自引：0，他引：5
中国境内的许多河流发育有网状河段,从长江、黑龙江、珠江等这样的大型河流到嫩江、赣江等中小型河流都有。依据这些网状河的地理和构造背景的不同,可以把它们划分为:平原网状河流、山谷网状河流、入湖三角洲平原网状河流和入海三角洲平原网状河流四大类型。作者通过实地挖掘探槽、密集采样,对嫩江齐齐哈尔平原网状河段、赣江入湖三角洲平原网状河段、珠江入海三角洲平原网状河段沉积特征进行了详细描述和研究,并建立了网状河的沉积模式,探讨了网状河的成因。认为网状河流体系的发育不受气候和地理位置的限制,低坡降是形成网状河的必要条件,相对稳定的网状河道不同于曲流河和辫状河,湿地环境是网状河流体系中最发育的地貌单元,堤岸植被繁茂、粘结性高是河道稳定的重要因素,与曲流河和辫状河相比,网状河出现的几率较低。 相似文献
20.
克拉玛依油田一中区克拉玛依组S_4~1小层组发育的低弯度曲流河储层为该区块的主要油层之一,目前由于缺乏相对应的精细地质模型,已严重影响了该区块的剩余油分布研究工作。为了解决上述问题,通过对山西省柳林地区二叠系石盒子组低弯度曲流河地质露头实地测量,应用层次分析法和构型要素分析法建立低弯度曲流河露头地质模型。使用该模型并充分利用岩心和测录井资料,对S_4~1小层组沉积时期所发育的低弯度曲流河储层内部构型表征进行了预测,取得了较好的效果。研究表明,露头地质模型不仅对低弯度曲流河沉积模式的建立、单河道的划分,以及井间砂体的对比研究具有重要指导意义,而且能够准确的厘定井下区域单河道砂体及增生体规模、隔层密度、倾角和排列方式等,可为剩余油分布富集规律预测提供理论依据。 相似文献