首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 140 毫秒
1.
Structural analyses show that the Ailaoshan-Red River shear zone （ASRRSZ） in Ailao Mountain is composed of three different deformational domains. These domains may represent three episodes of left-lateral slip experienced by the ASRRSZ. The first episode of such deformation occurred throughout the eastern high-grade belt of the ASRRSZ under a transtensional regime and produced L- type tectonites of amphibolite grade. The second episode of left-lateral slip formed high strain zones overprinting the high-grade belt. Its deformational mechanism is similar to simple shear and the deformed rocks are L-S mylonites of greenschist grade. The third episode of left-lateral slip took place chiefly in a western low-grade belt of the ASRRSZ. This deformation occurred in a transpressional regime, formed an overall structure pattern of a sinistral thrust system and produced phyllonites of low-greenschist grade. Geochronological data indicated that the three episodes of left-lateral slip happened before ～58-56 Ma, at least from ～27 Ma to 22 Ma and at ～13-12 Ma respectively. The first episode of slip in the ASRRSZ appeared to correspond to the initial collision of India and Asia at ～60 Ma. The second episode took place almost at the same time as the most intensive compression and uplift in Tibet. The latest event might represent a further eastward material flow in Tibet after ～16-13 Ma. Thus, the ASRRSZ of southeastern Asia probably experienced three main episodes of Tertiary left- lateral slip in the course of intracontinental convergence since the India-Asia collision.  相似文献   

2.
The Xianshuihe fault zone is a seismo-genetic fault zone of left-lateral slip in Southwest China. Since 1725, a total of 59 Ms ≥ 5.0 earthquakes have occurred along this fault zone, including 18 Ms 6.0–6.9 and eight Ms ≥ 7.0 earthquakes. The seismic risk of the Xianshuihe fault zone is a large and realistic threat to the western Sichuan economic corridor. Based on previous studies, we carried out field geological survey and remote sensing interpretation in the fault zone. In addition, geophysical surveys, trenching and age-dating were conducted in the key parts to better understand the geometry, spatial distribution and activity of the fault zone. We infer to divide the fault zone into two parts: the northwest part and the southeast part, with total eight segments. Their Late Quaternary slip rates vary in a range of 11.5 mm/a –(3±1) mm/a. The seismic activities of the Xianshuihe fault zone are frequent and strong, periodical, and reoccurred. Combining the spatial and temporal distribution of the historical earthquakes, the seismic hazard of the Xianshuihe fault zone has been predicted by using the relationship between magnitude and frequency of earthquakes caused by different fault segments. The prediction results show that the segment between Daofu and Qianning has a possibility of Ms ≥ 7.0 earthquakes, while the segment between Shimian and Luding is likely to have earthquakes of about Ms 7.0. It is suggested to establish a GPS or In SAR-based real-time monitoring network of surface displacement to cover the Xianshuihe fault zone, and an early warning system of earthquakes and post seismic geohazards to cover the major residential areas.  相似文献   

3.
The easternmost Tian Shan lies in eastern Xinjiang, Central Asia. The South Barkol basin fault(SBF) in the northern part of the easternmost Tian Shan is a major tectonic structure in this orogenic region. The late Quaternary activity, paleoseismology, and deformation characteristics of the fault provide important clues for understanding the tectonic process of the eastern Tian Shan orogen and implementing seismic mitigation. Through interpretation of high-resolution satellite images, unmanned aerial vehicle measurements, and detailed geological and geomorphic investigations, we suggest that the fault exhibits clear left-lateral slip along its western segment. Paleoseismic trenches dug near Xiongkuer reveal evidence of six large paleoearthquakes. The four latest paleoearthquakes were dated: the oldest event occurred at 4663 BC–3839 BC. Data on the horizontal offsets along the probable 1842 Barkol earthquake coseismic rupture suggest clear multiple relationships between cumulative offsets and possible ~4 m of coseismic left-lateral slip per event. From the cumulative offsets and 14 C sample ages, we suggest an average Holocene left-lateral slip rate of 2.4–2.8 mm/a on the SBF, accounting for ~80% of lateral deformation within the entire eastern Tian Shan fault system. This result is comparable with the shortening rate of 2–4 mm/a in the whole eastern Tian Shan, indicating an equal role of strike-slip tectonics and compressional tectonics in this orogen, and that the SBF may accommodate substantial lateral tectonic deformation.  相似文献   

4.
The slip rate of Yema River–Daxue Mountain fault in the western segment of Qilian Mountains was determined by the dated offset of river risers or gullies. Results indicate that the left-lateral fault slip rate is 2.82 ± 0.20 mm/a at Dazangdele site,2.00 ± 0.24 mm/a at Shibandun site,and 0.50 ± 0.36 and 2.80 ± 0.33 mm/a at two sites in Zhazihu. The ideal average slip rate of the whole fault is 2.81 ± 0.32 mm/a. The lower slip rate confirms part of the displacement of Altyn Tagh fault was transformed into an uplifting of the strap mountains in the western segment of Qilian Mountains,whereas another part transformed into sinistral displacement of Haiyuan fault. This study illustrates that the slip of large strike-slip faults in the northeastern margin of the plateau transforms into crust thickening at the tip of the fault without large-scale propagation to the outer parts of the plateau.  相似文献   

5.
Quantitative analysis of the kinematics of the active faults distributed around the Qinghai-Tibetan Plateau is critical to understand current tectonic processes of the plateau. Chronological analysis, based on the comparison among regional climate and geomorphology, digital photogrammetry, offset landforms, and the tectonics were adopted in this study on the Xianshuihe fault in the eastern Tibetan plateau. Two or more offset-age data were obtained for each segment of the Xianshuihe and the Yunongxi faults. The offset landforms, including river terrace, alluvial fan and glacial moraine, provide constraints for the late Quaternary slip rate of the Xianshuihe fault. The left-lateral strike slip rate of the Xianshuihe fault decreases from 17 mm/a on the northwest segment to 9.3 mm/a on the southeast segment. Regarding the Xianshuihe fault zone and its adjacent blocks as a regional tectonic system, vector analysis was used to quantitatively analyze the longitudinal kinematical transformation and transversal slip partitioning on the fault zone in terms of the kinematical parameters of the main faults within the zone. The results show that there is a distributed vertical uplift at a rate of 6.1 mm/yr caused by shortening across the Gongga Mountains region. Based on these results, we established a model of the slip partitioning for the southeastern segment of the Xianshuihe fault zone.  相似文献   

6.
A huge triangle-shaped tectonic region in eastern Asia plays host to numerous major earthquakes. The three boundaries of this region, which contains plateaus, mountains, and intermountain basins, are roughly the Himalayan arc, the Tianshan-Baikal, and longitude line 105°E. Within this triangular region, tectonism is intense and major deformation occurs both between crustal blocks and within most of them. Outside of this region, rigid blocks move as a whole with relatively few major earthquakes and relatively weak Cenozoic deformation. On a large tectonic scale, the presence of this broad region of intraplate deformation results from dynamic interactions between the Indian, Philippine Sea-West Pacific, and Eurasian plates, as well as the influence of deep-level mantle flow. The Indian subcontinent, which continues to move northwards at 40 mm/a since its collision with Eurasia, has plunged beneath Tibet, resulting in various movements and deformations along the Himalayan arc that diffuse over a long distance into the hinterland of Asia. The northward crustal escape of Asia from the Himalayan collisional zone turns eastwards and southeastwards along 95°–100°E longitude and defines the eastern Himalayan syntaxis. At the western Himalayan syntaxis, the Pamirs continue to move into central Asia, leading to crustal deformation and earthquakes that are largely accommodated by old EW or NW trending faults in the bordering areas between China, Mongolia, and Russia, and are restricted by the stable landmass northwest of the Tianshan-Altai-Baikal region. The subduction of the Philippine and Pacific plates under the Eurasian continent has generated a very long and narrow seismic zone along trenches and island arcs in the marginal seas while imposing only slight horizontal compression on the Asian continent that does not impede the eastward motion of eastern Asia. In the third dimension, there may be southeastward deep mantle flow beneath most of Eurasia that reaches the marginal seas and may contribute to extension along the eastern margin of Eurasia.  相似文献   

7.
The gold concentration areas in the northwestern Jiaodong Peninsula constituted an important gold metallogenetic region in Eastern China during the Mesozoic. The deep geological bodies’ texture characteristic is important for exploring the resources thoroughly and understanding the metallogenic process. The detailed textures were revealed using high-resolution seismic profiles through the three major ore-controlling structures-Sanshandao fault zone, Jiaojia fault zone and Zhaoping fault zone. This study aims to establish a deep structural framework of this area. Based on their formation mechanism, the fault structures developed in the area can be divided into regional and local fault structures. The structural styles are characterised by superimposing their compressional, strike-slip and extensional multi-stage activities. The crust is cut by vertical structures corresponding to a left-lateral strike-slip fault system on the surface. Nearby these structures are the arc-shape structures formed by multi-stage magma intrusions into the upper crust. Bounded by the Tancheng–Lujiang and Muping–Jimo fault zones, the current Jiaodong block, developed a series of NE-trending strike-slip fault systems, was probably formed by the assemblage of several obliquely aligned blocks. The intensive magmatism and hydrothermal activity between the blocks induced large-scale mineralisation. It provides a new angle of view for understanding the cratonic destruction and large ore-concentration formed during the Mesozoic.  相似文献   

8.
The Garzê–Yushu strike-slip fault in central Tibet is the locus of strong earthquakes(M 7). The deformation and geometry of the co-seismic surface ruptures are reflected in the surface morphology of the fault and depend on the structure of the upper crust as well as the pre-existing tectonics. Therefore, the most recent co-seismic surface ruptures along the Garzê–Yushu fault zone(Dangjiang segment) reveal the surface deformation of the central Tibetan Plateau. Remote sensing images and field investigations suggest a 85 km long surface rupture zone(striking NW-NWW), less than 50 m wide, defined by discontinuous fault scarps, right-stepping en echelon tensional cracks and left-stepping mole tracks that point to a left-lateral strike-slip fault. The gullies that cross fault scarps record systematic left-lateral offsets of 1.8 m to 5.0 m owing to the most recent earthquake, with moment magnitude of about M 7.5, in the Dangjiang segment. Geological and geomorphological features suggest that the spatial distribution of the 1738 co-seismic surface rupture zone was controlled by the pre-existing active Garzê–Yushu fault zone(Dangjiang segment). We confirm that the Garzê–Yushu fault zone, a boundary between the Bayan Har Block to the north and the Qiangtang Block to the south, accommodates the eastward extrusion of the Tibetan Plateau and generates strong earthquakes that release the strain energy owing to the relative motion between the Bayan Har and Qiangtang Blocks.  相似文献   

9.
Muscovite 40Ar-39Ar dating of muscovite-quartz schist, eclogite and retrograde eclogite indicates an Indosinian orogenesis occurred at 220–240 Ma in the Lhasa terrane, which is caused by the closure of Paleo-Tethyan ocean basin and the following collision of the northern Lhasa terrane and southern Gondwana land. This Indosinian orogenesis is further confirmed by the regional sedimentary characteristics, magmatic activity and ophiolite mélange. This evidence suggests that the Indosinian orogenic belt in the Lhasa terrane is widely distributed from the Coqen county in the west, and then extends eastward through the Ningzhong and Sumdo area, finally turning around the eastern Himalayan syntaxis into the Bomi county. Based on the evolutionary process, the geological development of Lhasa terrane from early Paleozoic to early Mesozoic can be divided into seven stages. All of the seven stages make up a whole Wilson circle and reveal a perfect evolutionary process of the Paleo-Tethys ocean between the northern Lhasa terrane and southern Gondwana land. The Indosinian orogenisis is a significant event for the evolution of the Lhasa terrane as well as the Tibetan Plateau.  相似文献   

10.
Field investigation and laboratory work reveal that inhomogeneity of the deformation of the Xiannushan fault is mainly characterized by lateral zonation, longitudinal segmentation and downward stratification. Based on these results, a 3-D deformational structure model of the fault was established and its geometrical and kinematic characteristics in two main deformational stages i.e. the main Yanshanian and Himalayan were discussed. The directions of principal and the differential stresses in these two stages were determined by using conjugate joints, striations of fault planes and microstructures of the fault zone. The direction of σI is N-S in direction with differential stresses of 150-250 MPa in the Yanshanian, and N70E with a differential stress ranging from 80-120 MPa in the Himalayan.  相似文献   

11.
The Bolnay (Hangayn) fault is an active shear system which generated the M = 8.2-8.5 Bolnay earthquake of 23 July 1905, one of world’s largest recorded intracontinental event. The fault follows the Mesozoic suture formed during the closure of the Mongolia-Okhotsk ocean. The Late Cenozoic faulting in the region was induced by propagation of strain from the India-Eurasia collision that had reached Mongolia at about 5 ± 3 Ma. The left-lateral strike slip almost all over the fault length is compensated in its western end by Late Quaternary reverse motion. We estimated coseismic slip associated with the event of 1905 and the previous earthquakes in the eastern fault end and checked whether vertical offset compensates the strike slip in this part as well. The 1905 coseismic slip measured from a displaced dry stream bed and pebble bars in the Hasany-Gol river valley was 6.5-7.5 m. The 13 ± 1 m left-lateral displacement of pebble bars in the same valley represents a cumulative slip of two events. Paleoseismological studies across the strike of surface ruptures reveal at least two generations of rupture in two events that postdated the deposition of sediments with a 14C age of 4689 ± 94 yr. Hypsometry of the alluvial surface in the zone of deformation shows gradual elevation increase toward the mountains, but without abrupt change across the fault. This means the absence of vertical offset and reactivation of the fault as a left-lateral strike slip. The horizontal slip in the eastern extension of the Bolnay fault is compensated rather by parallel fault-bounded pull-apart basins trending northeastward oblique to the principal fault strike. The age of their sedimentary fill suggests no older than middle Pleistocene normal faulting that compensated the Bolnay strike slip.  相似文献   

12.
喜马拉雅造山带是地球上海拔最高、规模最大的陆陆板块俯冲碰撞带在这条长达2 500 km的板块边界上,近年来多次发生破坏性地震,造成大规模的滑坡、房屋倒塌等次生灾害,给人民生命和财产安全造成严重的威胁。分别选取尼泊尔喜马拉雅、喜马拉雅东构造结和喜马拉雅西构造结地区近期发生的3个地震震群作为研究实例,基于中国科学院青藏高原研究所在研究区架设的区域流动地震台站记录的波形资料,对地震的震源位置和震源机制解进行计算。结果表明,在尼泊尔喜马拉雅地区,主喜马拉雅逆冲断裂是大地震的主要发震构造;东构造结地区的地震以逆冲和走滑型为主,表明印度板块向北东方向的逆冲推覆和青藏高原向东南逃逸的侧向挤出是该地区的主要构造背景;西构造结地区中深源地震多发,揭示了高角度大陆深俯冲的几何形态。  相似文献   

13.
Himalayan orogenic belt is the highest and largest continental collision and subduction zone on the Earth. The Himalayan orogenic belt has produced frequent large earthquakes and caused several geohazards due to landslides and housing collapse, having an impact on the safety of life and property along a length of over 2500 km. Here we took three earthquake clusters as examples, which occurred at Nepal Himalaya, eastern Himalayan syntaxis and western Himalayan syntaxis, respectively. Here we calculated the earthquake locations and fault plane solutions based on the waveform data recorded by seismic stations deployed in source areas by the Institute of Tibetan Plateau Research, Chinese Academy of Sciences. We found that at the Nepal Himalayan, the Main Himalayan Thrust is the major tectonic structure for large earthquakes to occur. At the eastern Himalayan syntaxis, most earthquakes are of the reverse or strike-slip faulting. The major tectonic feature is the combination of the NE-dipping thrust with the southeastern escape of the Tibetan plateau. At the western Himalayan syntaxis, intermediate-depth earthquakes are active. These observations reveal the geometry of the deep subduction of the continental plate with steep dipping angle.  相似文献   

14.
The Himalayan range is one of the best documented continent-collisional belts and provides a natural laboratory for studying subduction processes. High-pressure and ultrahigh-pressure rocks with origins in a variety of protoliths occur in various settings: accretionary wedge, oceanic subduction zone, subducted continental margin and continental collisional zone. Ages and locations of these high-pressure and ultrahigh-pressure rocks along the Himalayan belt allow us to evaluate the evolution of this major convergent zone.

(1) Cretaceous (80–100 Ma) blueschists and possibly amphibolites in the Indus Tsangpo Suture zone represent an accretionary wedge developed during the northward subduction of the Tethys Ocean beneath the Asian margin. Their exhumation occurred during the subduction of the Tethys prior to the collision between the Indian and Asian continents.

(2) Eclogitic rocks with unknown age are reported at one location in the Indus Tsangpo Suture zone, east of the Nanga Parbat syntaxis. They may represent subducted Tethyan oceanic lithosphere.

(3) Ultrahigh-pressure rocks on both sides of the western syntaxis (Kaghan and Tso Morari massifs) formed during the early stage of subduction/exhumation of the Indian northern margin at the time of the Paleocene–Eocene boundary.

(4) Granulitized eclogites in the Lesser Himalaya Sequence in southern Tibet formed during the Paleogene underthrusting of the Indian margin beneath southern Tibet, and were exhumed in the Miocene.

These metamorphic rocks provide important constraints on the geometry and evolution of the India–Asia convergent zone during the closure of the Tethys Ocean. The timing of the ultrahigh-pressure metamorphism in the Tso Morari massif indicates that the initial contact between the Indian and Asian continents likely occurred in the western syntaxis at 57 ± 1 Ma. West of the western syntaxis, the Higher Himalayan Crystallines were thinned. Rocks equivalent to the Lesser Himalayan Sequence are present north of the Main Central Thrust. Moreover, the pressure metamorphism in the Kaghan massif in the western part of the syntaxis took place later, 7 m.y. after the metamorphism in the eastern part, suggesting that the geometry of the initial contact between the Indian and Asian continents was not linear. The northern edge of the Indian continent in the western part was 300 to 350 km farther south than the area east of the Nanga Parbat syntaxis. Such “en baionnette” geometry is probably produced by north-trending transform faults that initially formed during the Late Paleozoic to Cretaceous Gondwana rifting. Farther east in the southern Tibet, the collision occurred before 50.6 ± 0.2 Ma. Finally, high-pressure to ultrahigh-pressure rocks in the western Himalaya formed and exhumed in steep subduction compared to what is now shown in tomographic images and seismologic data.  相似文献   


15.
The active kinematics of the eastern Tibetan Plateau are characterized by the southeastward movement of a major tectonic unit, the Chuan-Dian crustal fragment, bounded by the left-lateral Xianshuihe–Xiaojiang fault in the northeast and the right-lateral Red River–Ailao Shan shear zone in the southwest. Our field structural and geomorphic observations define two sets of young, active strike–slip faults within the northern part of the fragment that lie within the SE Tibetan Plateau. One set trends NE–SW with right-lateral displacement and includes the Jiulong, Batang, and Derong faults. The second set trends NW–SE with left-lateral displacement and includes the Xianshuihe, Litang, Xiangcheng, Zhongdian, and Xuebo faults. Strike–slip displacements along these faults were established by the deflection and offset of streams and various lithologic units; these offsets yield an average magnitude of right- and left-lateral displacements of ～15–35 km. Using 5.7–3.5 Ma as the time of onset of the late-stage evolution of the Xianshuihe fault and the regional stream incision within this part of the plateau as a proxy for the initiation age of conjugate strike–slip faulting, we have determined an average slip rate of ～2.6–9.4 mm/year. These two sets of strike–slip faults intersect at an obtuse angle that ranges from 100° to 140° facing east and west; the fault sets define a conjugate strike–slip pattern that expresses internal E–W shortening in the northern part of the Chuan-Dian crustal fragment. These conjugate faults are interpreted to have experienced clockwise and counterclockwise rotations of up to 20°. The presence of this conjugate fault system demonstrates that this part of the Tibetan Plateau is undergoing not only southward movement, but also E–W shortening and N–S lengthening due to convergence between the Sichuan Basin and the eastern Himalayan syntaxis.  相似文献   

16.
Initiation and Long-Term Slip History of the Altyn Tagh Fault   总被引：1，自引：0，他引：1  
《International Geology Review》2012,54(12):1087-1093
New Tertiary piercing points along the eastern and central Altyn Tagh fault, the northern boundary of the Tibetan Plateau, allow construction of the first well-defined time-displacement curve for the fault. Displacement-history analysis indicates: (1) late Oligocene-earliest Miocene inception of the Altyn Tagh fault; (2) 375 ± 25 km of total left-lateral slip on the eastern and central segment of the Altyn Tagh fault; and (3) an average long-term Cenozoic slip rate of approximately 12-16 mm/year. These results demonstrate that Himalayan deformation propagated well into the interior of Asia by early Miocene time and that a significant amount of India-Asia convergence was accommodated by sinistral slip on the Altyn Tagh fault.  相似文献   

17.
哀牢山—红河构造带哀牢山段可划分为东部高级变质带和西部低级变质带。构造分析表明:该构造带由3个不同变形域组成,可能代表其经历的3期左行走滑。第1期走滑发生在整个高级变质带,为拉张性左行走滑,形成角闪岩相L型构造岩。第2期走滑形成高级变质带中的高应变带,变形体制接近简单剪切,形成绿片岩相L-S型糜棱岩。第3期主要发生在低级变质带,为挤压性走滑,形成左行逆冲构造格局,并形成低绿片岩相千糜岩。地质年代学数据证明,3期左行走滑的形成时代分别是:距今58~56Ma、27~22Ma和13~12Ma±。哀牢山—红河构造带第1期左行走滑可能对应于印度与欧亚大陆距今60Ma左右的初始碰撞;第2期变形与青藏高原最强的挤压隆升期一致;第3期事件可能代表距今16~13Ma开始的青藏高原物质进一步东挤。哀牢山—红河构造带的3期主要左行走滑均发生在新生代印度与欧亚大陆的汇聚过程中。  相似文献   

18.
《Geodinamica Acta》2001,14(1-3):197-212
The Karasu Rift (Antakya province, SE Turkey) has developed between east-dipping, NNE-striking faults of the Karasu fault zone, which define the western margin of the rift and west-dipping, N–S to N20°–30°E-striking faults of Dead Sea Transform fault zone (DST) in the central part and eastern margin of the rift. The strand of the Karasu fault zone that bounds the basin from west forms a linkage zone between the DST and the East Anatolian fault zone (EAFZ). The greater vertical offset on the western margin faults relative to the eastern ones indicates asymmetrical evolution of the rift as implied by the higher escarpments and accumulation of extensive, thick alluvial fans on the western margins of the rift. The thickness of the Quaternary sedimentary fill is more than 465 m, with clastic sediments intercalated with basaltic lavas. The Quaternary alkali basaltic volcanism accompanied fluvial to lacustrine sedimentation between 1.57 ± 0.08 and 0.05 ± 0.03 Ma. The faults are left-lateral oblique-slip faults as indicated by left-stepping faulting patterns, slip-lineation data and left-laterally offset lava flows and stream channels along the Karasu fault zone. At Hacılar village, an offset lava flow, dated to 0.08 ± 0.06 Ma, indicates a rate of left-lateral oblique slip of approximately 4.1 mm·year–1. Overall, the Karasu Rift is an asymmetrical transtensional basin, which has developed between seismically active splays of the left-lateral DST and the left-lateral oblique-slip Karasu fault zone during the neotectonic period.  相似文献   

19.
为了查明东喜马拉雅构造结东、西边界断裂的关系,及其印度与欧亚板块碰撞以来东喜马拉雅构造结的构造演化过程.在综合野外填图、构造观察、代表性岩石的锆石LA-ICP-MS U-Pb测年分析及前人研究的基础上,对东构造结两条边界断裂的几何学、运动学特征进行对比,讨论了两条断裂的多期次、多阶段的变形特征,还探讨了在东构造结地区自印度板块-欧亚板块碰撞以来的演化历史.结果显示,东构造结两条边界断裂几何学和运动学非常相似,构造变形具有明显的同时代、同期次特点,共同经历从碰撞、持续俯冲-折返、直到后期垮塌-隆升等一系列重要的地质事件.   相似文献   

20.
大型走滑断裂对青藏高原地体构架的改造   总被引：15，自引：5，他引：10  
青藏高原的大型走滑断裂有13条,已确定的大型韧性走滑断裂主要形成于3个时期:早古生代、印支期和新生代以来.印度/亚洲碰撞(60～50Ma)以来形成的大型韧性走滑构造位于青藏高原的南部,而且主要在喜马拉雅山链的东、西两侧,如西侧的喀喇昆仑和恰曼韧性右行走滑断裂,东侧的鲜水河-小江和哀牢山-红河韧性左行走滑断裂、崇山-澜沧江、嘉黎-高黎贡山和萨盖韧性右行走滑断裂等.主要的变形特征表现为早期具有地壳深部的韧性走滑剪切带性质,在后期抬升过程中,由韧性→韧脆性→脆性应变转化;而在青藏高原北部,表现为古韧性走滑剪切带的再活动,如阿尔金-康西瓦、东昆仑左行走滑断裂,以及新生的脆性断裂,如海源左行走滑断裂等.本文在青藏高原13条大型走滑断裂研究及综合研究的基础上,阐述不同时期的大型走滑断裂,以及它们在青藏高原地体拼合及碰撞造山中的作用,包括走滑断裂与走滑型褶皱造山、走滑断裂与挤压/转换型造山、走滑断裂与挤压盆-山体系、走滑断裂与地体相对位移和走滑断裂与地体的侧向挤出,以及走滑断裂与构造结的形成.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号