首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
南羌塘盆地扎仁古油藏白云岩储层特征及成因研究   总被引：9，自引：1，他引：9       下载免费PDF全文
根据薄片、铸体薄片、压汞、阴极发光等研究,详细描述了南羌塘盆地扎仁古油藏白云岩的储层特征,并对白云岩成因作了初步研究。认为该白云岩在沉积期后变化中经历了多种成岩作用改造,其中影响白云岩储集性的作用主要有白云石化作用、溶蚀作用、重结晶作用和构造应力作用,对白云岩孔渗改善起了积极作用。白云岩主要储集空间为晶间孔、晶间溶孔,储集物性良好。广泛发育的白云石环边结构等淡水成因标志表明,该区白云岩是通过大气水-海水孔隙混合流体交代灰岩所形成的。  相似文献   

2.
《Engineering Geology》2002,63(1-2):17-29
Effects of porphyrotopic textures on expansion of dolomitic limestone aggregates due to alkali–carbonate reaction (ACR) are presented. The dispersed distribution of dolomites in the texture of aggregates can be divided into pophyrotopic-M, psedoporphyrotopic-M and porphyrotopic-S types. It is proved that porphyrotopic textures are more important to ACR expansion than lithologic species of dolomitic limestones. The dolomitic limestones with both porphyrotopic-M or psedoporphyrotopic-M texture and the small size of dolomite crystals are expected to be highly alkali–carbonate reactive. These aggregates can be found not only in dolomitic micritic limestones but also in dolomitic micritic allochemical limestones as well as dolomitic sparry allochemical limestones.  相似文献   

3.
Carbonate rocks penetrated to a depth of 9.07 km in the Anadarko Basin of south-western Oklahoma, show a number of deformation features induced solely by the increased pressures and temperatures of deep burial. The rocks are at temperatures around 210° C and an overburden pressure of about 2.5 kb.Large calcite crystals in the limestones show extensive twin development accompanied by bending or multiple displacement along twin lamellae. Inferred granulation or cataclastic textures are shown by large calcite crystals which are now bordered by small anhedral calcite grains, a product of mechanical breakage. Pressure-solution features are common and aggrading recrystallization has led to an increase in average crystal size with depth.Limestones at these depths are tight compared to dolostones in the same basin at slightly shallower depths. These dolostones still retain in excess of 20% porosity at 8.08 km.  相似文献   

4.
Nodular chert from the middle and upper Arbuckle Group (Early Ordovician) in the Slick Hills, SW Oklahoma, was formed by selective replacement of grainstones, burrow fillings, algal structures, and evaporite nodules. Chert nodules are dominantly microquartz with minor fibrous quartz (both quartzine and chalcedony), megaquartz, and microflamboyant quartz. Lepisphere textures of an opal-CT precursor are preserved in many (especially in finely-crystalline) chert nodules. The δ18O values of microquartz chert range from +23.4 to + 28.80/00 (SMOW), significantly lower than those of Cenozoic and Mesozoic microquartz chert formed both in the deep sea and from near-surface sea water. The δ18O values of chert decrease with increasing quartz crystal size. Silicification in the Arbuckle Group occurred during early diagenesis, with the timing constrained by the relative temporal relationships among silicification, burial compaction, and early dolomite stabilization. Silica for initial chert nucleation may have been derived from both dissolution of sponge spicules and silica-enriched sea water. Chert nucleation appears to have been controlled by the porosity, permeability, and organic matter content of precursor sediments. This conclusion is based on the fact that chert selectively replaced both porous grainstones and burrows and algal structures enriched in organic matter. Growth of chert probably occurred by a maturation process from opal-A(?), to opal-CT, to quartz, as indicated by the presence of opal-CT precursor textures in many chert nodules. Although field and petrographic evidence argues for an early marine origin for chert in the Arbuckle Group, the light δ18O values are inconsistent with this origin. Meteoric resetting of the δ18O values of the chert during exposure of the carbonate platform best explains the light δ18O values because: (i) the δ18O values of chert nodules decrease with decreasing δ18O values of host limestones, and (ii) chert nodules from early dolomite, which underwent more extensive meteoric modification than associated limestones, have lighter δ18O values than chert nodules from limestones. Increasing recrystallization of chert nodules by meteoric water resulted in progressive 18O depletion and (quartz) crystal enlargement.  相似文献   

5.
Melanosome textures in several specimens of migmatitic pelitic schists are evaluated to test leucosome-generating reactions inferred independently on the basis of mineralogic and chemical relationships in the melanosomes. Systematic variations in grain numbers per unit volume, grain sizes, size distributions, and shapes, and grain contact frequencies within melanosomes can be attributed to leucosome generation. These variations support independent inferences of reactions based on modes and chemistry and, in one case, suggest a refinement of reactions inferred on these bases.In these specimens, at least, textures resulting from the leucosome-generating process have not been obliterated by later recrystallization and provide information regarding this process. These textures indicate that leucosome generation involved preferential reaction at mice-quartz and feldspar-quartz grain boundaries. This conclusion is in agreement with melting processes observed in short-term melting experiments.  相似文献   

6.
Using the clumped isotope method, the temperature of dolomite and calcite formation and the oxygen isotopic composition (δ18Ow) of the diagenetic fluids have been determined in a core taken from the Arab‐D of the Ghawar field, the largest oil reservoir in the world. These analyses show that while the dolomites and limestones throughout the major zones of the reservoir recrystallized at temperatures between ca 80°C and 100°C, the carbonates near the top of the reservoir formed at significantly lower temperatures (20 to 30°C). Although the δ18O values of the diagenetic fluids show large variations ranging from ca <0‰ to ca +8‰, the variations exhibit consistent downhole changes, with the highest values being associated with the portion of the reservoir with the highest permeability and porosity. Within the limestones, dolomites and dolomites associated with the zone of high permeability, there are statistically significant different trends between the δ18Ow values and recrystallization temperature. These relationships have different intercepts suggesting that fluids with varying δ18Ow values were involved in the formation of dolomite and limestone compared to the formation of dolomite associated with the zone of high permeability. These new data obtained using the clumped isotope technique show how dolomitization and recrystallization by deep‐seated brines with elevated δ18Ow values influence the δ18O values of carbonates, possibly leading to erroneous interpretations unless temperatures can be adequately constrained.  相似文献   

7.
四川盆地东部下三叠统飞仙关组鲕滩相储集层多为白云岩,主要分布于环开江—梁平盆地的台地边缘相带。岩石学和地球化学特征表明,飞仙关组鲕滩相储集层经历了多期白云岩化作用,其中最重要的一期发生于成岩早期近地表环境,由蒸发海水回流引起,形成的粉晶交代白云石构成了现今白云岩的主体。飞仙关组早期白云岩经历了不同程度的埋藏重结晶作用,形成了不同的岩石结构类型。飞仙关组白云岩的孔隙多为原岩中继承而来,白云岩化作用对储集层发育的意义并非创造孔隙,而是保存已有的孔隙。由于白云岩化作用发生的时间早以及白云岩的抗压溶性质,原生（鲕）粒间孔以及早期大气淡水溶蚀作用形成的鲕模孔/粒内溶孔可以在很大程度上保存下来,构成了现今鲕滩相储集层的主要储集空间。  相似文献   

8.
Lower Carboniferous shallow water limestones of Asbian and Brigantian age in Britain commonly contain abundant interparticle micrite and characteristically display large syntaxial calcite overgrowths on crinoid and echinoid grains. These overgrowths appear to have developed at the expense of the micrite and are widely regarded as neomorphic replacements. However, cathodoluminescence of these has revealed growth features which indicate that they are not neomorphic but originated as passive cement fills of solution voids surrounding echinoderm grains. We introduce the term solution corona for these grain selective voids and consider that three processes may have contributed to their development, namely: high-Mg calcite stabilization of host grains, crystal ripening, and meteoric dissolution. Cyclic subaerial emergence was a critical factor in these processes, and we contrast the morphology of the overgrowths in question with forms produced in basinal limestones which never experienced comparable early meteoric conditions. These early-formed solution coronas around echinoderm grains are therefore a useful indicator of meteoric diagenesis and have important implications for porosity evolution. The syntaxial cements which fill the solution coronas show distinct phases of growth in cathodoluminescence which reflect a progression from near-surface meteoric conditions to deep burial with pressure solution.  相似文献   

9.
It is possible to apply actualistic principles to the interpretation of the paleoenvironment of iron-rich sedimentary rocks, although few iron-rich sediments form today. The sedimentary textures and structures of cherty iron-formations, Minette-tpye ironstones and limestones are similar. These similarities prove that the hydrodynamic processes of the deposition of the three rock types are the same. Therefore, it is possible to define facies of cherty iron-formations and Minette-type ironstones on the basis of their sedimentary textures and structures, disregarding mineralogy, and to interprete the formative environment by comparison with Recent limestones. Shaly sulfide iron-formation and sideritic clay ironstones are ferriferous mudstones. Methods applied to the interpretation of iron-poor shales may also be applied to these two rock types. The mineralogy of iron-rich sedimentary rocks is determined by diagenetic processes. Depositional organic content of the sediment, sediment texture (which controls diffusivity and permeability) and the groundwater flow system during diagenesis are the primary controls of iron-mineral diagenesis. Paleogeography and basin bathymetry are indirect controls of iron mineralogy, because they affect organic content and sediment texture.  相似文献   

10.
South of the Caledonian Brabant-Wales Massif a more than 200 m thick Tournaisian to Lower Visean replacive dolomite unit can be followed for several hundred kilometres from the Boulonnais (France) to Aachen (Germany). Field observations, of features such as karst cavities occurring at the top of the Lower Visean dolomite which are filled by Lower Visean crinoidal limestone, indicate that dolomitization and karstification took place during the Early Visean. This early development of the dolomite is in agreement with the presence of stylolites cutting the dolomite fabric. The minor element composition of the majority of the dolomites remains almost uniform throughout the entire studied area. Values for Fe, Mn, Na and Sr are normally in the range 700–4700 ppm, 15–400 ppm, 80–300 ppm and 50–200 ppm, respectively. The δ13C values (range-0.72 to +5.31%o) mainly reflect the carbon isotopic composition of the precursor limestones. The δ18O values, in contrast, are highly variable: ranging from-19.15 to +0.85%o. This rather large range of δ18O values is explained by multiple-step re-equilibration/recrystallization during progressive burial and subsequent uplift of the dolomites. These processes are also responsible for the high 87Sr/86Sr values of the dolomites which range from about 0.7088 to 0.7098. They are distinctly more radiogenic than Lower Visean marine carbonates (0.7076–0.7078). Correlation, however, of δ18O values or 87Sr/86Sr ratios with dolomite and/or cathodoluminescenec (CL) textures has not been very successful. This suggests that recrystallization may remain unrecognized if only petrographic techniques are used. Nevertheless, certain CL textures can be related to specific interactions with the ambient recrystallizing fluids.  相似文献   

11.
Rare earth elements (REE) were determined in fine, medium and coarse crystalline replacement dolomites, and for saddle dolomite cements from the Middle Devonian Presqu'ile barrier from Pine Point and the subsurface of the Northwest Territories and north-eastern British Columbia. REE patterns of the fine crystalline dolomite are similar to those of Middle Devonian limestones from the Presqu'ile barrier. Fine crystalline dolomite occurs in the back-barrier facies and may represent penecontemporaneous dolomitization at, or just below, the sea floor. Medium crystalline dolomite is widespread in the lower southern and lower central barrier. Medium crystalline dolomite is slightly depleted in heavy REE compared with Devonian marine limestones and fine crystalline dolomite, and has negative Ce and Eu anomalies. Medium crystalline dolomites replaced pre-existing limestones or were recrystallized from earlier fine crystalline dolomites. During these processes, the REE patterns of their precursors were modified. Late stage, coarse crystalline replacement dolomite and saddle dolomite cements occur together in the upper barrier and have similar geochemical signatures. Coarse crystalline dolomites have negative Eu anomalies, and those from the Pine Point area also have positive La anomalies. Saddle dolomites are enriched in light REE and have positive La anomalies. The REE patterns of coarse crystalline dolomite and saddle dolomite differ from those of marine limestones and fine and medium crystalline dolomites, suggesting that different diagenetic fluids were responsible for these later dolomites. Although massive dolomitization requires relatively large volumes of fluids in order to provide the necessary amounts of Mg2-. dolomitization and subsequent recrystallization may not necessarily modify the REE signatures of the precursor limestones because of the low concentrations of REE in most natural fluids. Thus, relative fluid-rock ratios during diagenesis may be estimated from REE patterns in the diagenetic and precursor minerals. Fine crystalline dolomites retain the REE patterns of their limestone precursors. In the medium and coarse crystalline dolomites the precursor REE patterns were apparently altered by large volumes of fluids involved during dolomitization. This study suggests that REE compositions of dolomites and their limestone precursors may provide important information about the relative amounts of fluids involved during diagenetic processes, such as dolomitization.  相似文献   

12.
Phosphorus-bearing rocks and sediments can be divided into two genetically distinct classes: phosphatic shales or limestones and phosphorites. Phosphatic shales are primary sediments in which phosphate nodules or micronodules have formed diagenetically by precipitation of calcium phosphates derived mainly from organic phosphorus. The nodules form in reducing environments at shallow depths within the sediments, where loss of phosphate by diffusion to the overlying water column is minimized. Highly biogenic sediments containing large amounts of organic matter and some fine clastic debris provide ideal environments for the formation of phosphate nodules.Phosphorites, in contrast, represent concentrated accumulations of reworked phosphate nodules which originated in phosphatic shales or limestones. Currents, wave action, recrystallization, and erosion and resedimentation are important mechanisms in the concentration process.Phosphatic shales and limestones may become excellent oil source rocks if thermal maturity is achieved. They are useful facies indicators for anoxic or nearly anoxic depositional environments, and are often associated with restricted basins, or, during certain geologic periods, with broad shelves developed during transgressions. Phosphorites, in contrast, are often correlated with sea-level regressions or uplifts. They are modest source rocks because of their low organic carbon contents and the fact that they were reworked under oxidizing conditions. Nevertheless, because phosphorites are derived from, and often grade into, phosphatic shales, they also are of potential utility in the search for oil source beds.  相似文献   

13.
In Upper Teesdale, Northern England, some limestones have been metamorphosed to a saccharoidal marble near to the contacts with the Whin Sill. This marble is virtually restricted to Upper Teesdale although the Whin Sill is found, intruded into the Carboniferous sequence, over most of Northern England.Petrographical and geochemical studies have shown that the marmorisation of the limestones is mainly dependent upon their non-carbonate carbon content and also the distance from the Whin Sill contact. Analyses show that only small amounts of carbon (0.5–1.0%) are required to inhibit recrystallization in the limestones.  相似文献   

14.
对塔东北库鲁克塔格隆起的乌孜里塔格剖面中上寒武统白云岩的岩石学、成岩作用、裂隙—孔隙发育与充填等特征研究认为：可划分为有序度逐渐增加的粉晶白云岩、粉细晶白云岩、中细晶白云岩和中粗晶白云岩及晶洞中的中粗晶、巨晶和鞍形白云石等4种类型;分别对应于早期准同生—浅埋、中浅埋藏、中等埋藏和构造断裂—热液（热卤水）作用4期的成岩阶段;其中,沿走滑断裂—裂隙带、呈不规则的“侵入体” 具有斑点状、条纹—条带、雁行状—斑马、角砾状和不规则状结构的中粗晶、粗晶、巨晶（部分为鞍形）白云岩（石）,一般不发光或呈昏暗的暗红色,具有与加拿大西部盆地典型的热液白云岩相似的特征;中上寒武统白云岩存在4～5期构造裂隙和3期以上的充填作用;热液白云岩中以晶间孔、晶间溶孔（洞）、裂隙及沿裂隙的扩溶孔洞为主,主要有二世代的白云石和方解石和少量沥青、石英、微量硬石膏和重晶石等多期充填作用。与西加盆地寒武系部分或全部交代充填缝洞及角砾构造、受来自落基山造山带的晚白垩世至古近系拉腊米（Laramide）构造的被排驱的热液流体交代形成的典型热液白云岩稍有不同,海西晚期（晚二叠世）及燕山—喜马拉雅期（晚白垩世—第四纪）沿挤压—走滑断裂排驱的地层热卤水循环—扩散与交代作用可能是本区热液白云岩的主要成因,储集空间主要由中、晚期构造断裂—裂隙（溶蚀）所致,但不排除成岩早期埋藏或晚期大气水作用对其影响。  相似文献   

15.
The studied carbonates are present within the middle part of the Tertiary siliciclastic dominated succession in Haddat Ash Sham area. This succession consists of conglomerates, sandstones, siltstones, mudstones, and ironstones arranged in upward coarsening and fining cycles of intermittent depositional environments ranging from fluvial coastal plain to shallow marine. The carbonates represent deposition in slightly restricted depositional environments during periods of very low clastic input. The studied two carbonate sections show a pronounced lateral and vertical changes from predominantly dolostones in the west to mixed dolostones and limestones in the east. Both sections began by egg yellow dolomitic lime mudstones and fine crystalline dolomite which indicate the formation of dolomite by late depositional to early diagenetic recrystallization of precursor Fe and Mg lime mud. During this time period, the western part of the study area continues in the deposition of Fe and Mg lime mud in slightly restricted depositional environments and formation of interbedded fine and coarse crystalline dolostones in coarsening-upward cycles. In the eastern part, the depositional environments become deeper and more circulated with short-lived periods of fluctuation in sea level and hence the deposition of foraminiferal wackestone, bioclastic packstones, and bioclastic rudstone in coarsening and shallowing-upward cycles. Both the western and eastern parts of the study area are terminated by characteristic yellow coarse crystalline phosphatic dolomite which indicate ultimate stages of shoaling and increasing the level and concentration of phosphorous in the restricted water and hence the formation of in situ and reworked phosphatic components. The diagenetic processes affected the dolostones and limestones microfacies associations include: dolomitization of Fe and Mg-rich lime mud, hematitization, calcitization, gypsification, and phosphatization of dolomite. Neophormation and recrystallization of micritic matrix and micritic intraclasts as well as shell fragments are the main diagenetic processes affected the limestones.  相似文献   

16.
Clinoamphibole from a mylonitic amphibolite exhibits microstructures characteristic of dynamic recrystallization, including porphyroclasts in a finer grained matrix of needle-shaped amphibole. The matrix amphibole defines an LS fabric and porphyroclasts have core and mantle structures with a core containing undulose to patchy extinction and (100) deformation twinning surrounded by a mantle of recrystallized grains. In addition intragranular grains also occur within the cores. TEM analyses of the porphyroclasts reveal that they contain a wide variety of lattice defects including high densities (5 × 108cm–2) of free dislocations and dislocation arrays, dissociated dislocations, stacking faults, and (100) micro-twins. TEM also shows that matrix grains and intragranular grains have relatively low defect densities, and that the intragranular new grains occur at localities in the porphyroclasts characterized by high densities of dislocations. These observations along with the chemical and orientation relationships between the recrystallized grains and porphyroclasts indicate that the new grains may have formed by heterogeneous nucleation and that further growth probably occurred by both strain assisted and chemically induced grain boundary migration or liquid film migration. This recrystallization event is interpreted to be synkinematic based on the fact that no recrystallization textures are present in the matrix grains and that the matrix grains define an LS fabric. However, the low defect densities in the matrix grains and the lack of intracrystalline strain in other phases indicate that post-kinematic recovery processes were active.  相似文献   

17.
A distinct vertical zonation very similar to that described for the Kuroko deposits of Japan, is displayed by both mineralogy and textures of sulphides from the Lahanos and Kzlkaya massive sulphide deposits of northeastern Turkey. A deeper erosional level is exposed at the Kzlkaya deposit, so that only remnants of the massive sulphide ore zone are present. The zonation is from an upper zone of massive Cu and Zn sulphides (black and yellow ore) with fine-grained, colloform, banded, framboidal, and spherulitic textures, downwards through an intermediate zone of low Cu-Zn massive pyrite with transitional textures, to a lower zone of stockwork and impregnated pyrite displaying euhedral, zoned textures. The fine-grained and colloform pyrite of the upper zones is progressively overgrown by, and recrystallized to, the massive and euhedral pyrite of lower zones. The original textures of these deposits are best preserved by pyrite. The previous interpretation of these textures, of sulphide deposition from colloidal solutions ponded by an impermeable pyroclastic horizon, is reexamined in the light of present observations. Although ultra-fine-grained sulphides, framboids, and radially-cracked spherules could have formed by replacement of pre-existing minerals by a colloidal solution, the colloform and banded textures are indicative of growth in open spaces. It thus seems likely that the fine-grained colloform sulphides, including chalcopyrite, sphalerite, and tennantite as well as pyrite, were initially deposited on or near the surface of the sea-floor. Additional evidence for this interpretation is seen in the progressive recrystallization of the sulphide textures to massive, much coarser, pyrite in the lower zones. This recrystallization may in part be due to diagenetic and hydrothermal processes operating after formation of the original layered sulphides. These conclusions are in agreement with those reached for the similar, but larger Madenköy deposit 100 km to the east.  相似文献   

18.
山西交口县庞家庄铝土矿矿物学与地球化学研究   总被引：5，自引：0，他引：5  
孟健寅 《地质与勘探》2011,47(4):593-604
山西交口县庞家庄铝土矿属于典型的喀斯特型铝土矿,矿体赋存于上石炭统本溪组,其下部为中奥陶统灰岩。矿石以隐晶质结构为主,含少量碎屑结构与鲕粒结构;矿石的结构特征显示一些风化物质经过了一段距离的搬运,并且矿体在晚期遭受了构造变形作用。x射线衍射分析显示铝土矿石中的主要组成矿物为硬水铝石、高岭石、赤铁矿、针铁矿、方解石与少量...  相似文献   

19.
Unconsolidated oozes, partially lithified oozes, recrystallized limestones, dolostones and crystalline aragonite are some of the varieties of carbonate sediment that have been found in the deep-sea; chemical and isotopic analyses of these varieties are presented here. The consolidated oozes and recrystallized limestones are low-Mg calcites and are often associated with basement rock (generally serpentinized peridotite or basalt) detritus. Lithification is suggested to arise from changes in the carbonate-equilibria system of the interstitial waters resulting from chemical degradation of the igneous rocks. When compared to unconsolidated oozes, lithification is seen to be accompanied by loss of Sr and a slight increase in B, Ba, Co, Cr, Ni and Y in most instances. The tuffaceous limestones are also low-Mg calcites, but are characterized by low Sr and relatively high B, Ba, Co, Cr, Cu, Ni, V, Y and Zn concentrations compared to the oozes. Three dolostones are described of very different isotopic and chemical composition, possibly indicating three different pathways of dolomitization. One with much depleted 13C and high Ba concentrations is probably derived from waters containing carbon from a fractionated organic source. Another is not greatly different from the consolidated limestones in minor and trace element composition and may be derived from them. The third variety is characterized by low concentrations of Sr, B, Ba, Cu and Y and relatively high concentrations of Pb: Crystalline aragonite is commonly found in many areas associated with serpentinized peridotite. This aragonite is characterized by relatively high concentrations of Sr and Ni; petrographic and isotopic analyses indicate precipitation from cold, carbonate-rich solutions percolating through the peridotite.  相似文献   

20.
Pervasive early- to late-stage dolomitization of Lower Ordovician Ellenburger Group carbonates in the deep Permian Basin of west Texas and southeastern New Mexico is recorded in core samples having present-day burial depths of 1.5–7.0 km. Seven dolomite-rock textures are recognized and classified according to crystal-size distribution and crystal-boundary shape. Unimodal and polymodal planar-s (subhedral) mosaic dolomite is the most widespread type, and it replaced allochems and matrix or occurs as void-filling cement. Planar-e (euhedral) dolomite crystals line pore spaces and/or fractures, or form mosaics of medium to coarse euhedral crystals. This kind of occurrence relates to significant intercrystalline porosity. Non-planar-a (anhedral) dolomite replaced a precursor limestone/dolostone only in zones that are characterized by original high porosity and permeability. Non-planar dolomite cement (saddle dolomite) is the latest generation and is responsible for occlusion of fractures and pore space. Dolomitization is closely associated with the development of secondary porosity; dolomitization pre-and post-dates dissolution and corrosion and no secondary porosity generation is present in the associated limestones. The most common porosity types are non-fabric selective moldic and vuggy porosity and intercrystalline porosity. Up to 12% effective porosity is recorded in the deep (6477 m) Delaware basin. These porous zones are characterized by late-diagenetic coarse-crystalline dolomite, whereas the non-porous intervals are composed of dense mosaics of early-diagenetic dolomites. The distribution of dolomite rock textures indicates that porous zones were preserved as limestone until late in the diagenetic history, and were then subjected to late-stage dolomitization in a deep burial environment, resulting in coarse-crystalline porous dolomites. In addition to karst horizons at the top of the Ellenburger Group, exploration for Ellenburger Group reservoirs should consider the presence of such porous zones within other Ellenburger Group dolomites.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号