共查询到20条相似文献，搜索用时 468 毫秒
1.
岩溶突水治理浆材的试验研究 总被引：3，自引：1，他引：2
以深部地下工程的加固和高压突水治理为研究对象,对一种新型化学注浆材料的化学反应封堵机制进行了可行性分析,并针对化学浆液的流动性、渗透性、抗冲刷性以及固结体的强度、水质毒理等因素进行了室内试验研究,详细地分析了浆液的物理化学特征,给出了浆液最佳配比值以及相应的性能指标。结合高压突水工程实例,开展现场注浆封堵试验,检验浆材用于突水封堵治理的可行性,并与超细水泥、水泥-水玻璃、尿醛树脂等常见注浆材料的封堵效果进行对比。试验结果表明：该化学浆液具有反应块、强度高、抗冲刷性强、无毒以及良好的渗透性和遇水膨胀功能,在现场应用中表现出良好的可控性和可泵性以及理想的注浆效果,与水泥类和一些常用化学浆材相比,具有运输快捷、配料方便、工艺简单的优点,所得结论对后续研究具有重要借鉴意义。 相似文献
2.
Application of New Theories and Technology for Grouting of Dams and Foundations on Rock 总被引：4，自引：1，他引：3
Permeation grouting is used to improve rock conditions under dams and foundations. During recent decades, there has been a substantial increase of understanding of the mechanism behind grout spread in fractured rock. It is the penetrability of the grout mix and the spread in the joints which will be the governing factors for the quality of the grout curtain. The flow properties and the pressure will give the required time to achieve the quality. The empirical based refusal and completion criteria of today can be replaced by a more engineering based grouting process. An active control method has been developed in order to govern the grout spread during the grouting operation based on the new theory of spreading of grout. The concept is called the ??real time grouting control method??. The concept and the latest finding of the mechanism of spreading of the grout in the fractures of the rock mass are presented in the paper. The application of the method on two dam projects is also presented. 相似文献
3.
《Geomechanics and Geoengineering》2013,8(4):259-273
An important design parameter in cement-grouted soil nailed structures is the shear strength at the interface between the grouted nail and the surrounding soil. Both field and laboratory pull-out tests are normally used to investigate this interface shear strength. However, these tests have some limitations. In this study, direct shear box tests are adopted to investigate the interface shear strength behaviour between a completely decomposed granite (CDG) soil and a cement grout plate. Tests were carried out in a large direct shear test apparatus over a range of constant normal stress, soil moisture content, and soil–cement grout interface surface waviness. The laboratory test procedures are briefly described and the main test results are presented, followed by a discussion of the shear behaviour of the soil–cement grout interface. The interface shear behaviour is compared with the shear strength behaviour of the same soil tested under comparable conditions. It is shown that the shear stress–displacement behaviour of the soil–cement grout interface is similar to that of the soil alone. The test results indicate that the interface shear strength of the CDG and cement grout material depends on the normal stress level, the soil moisture content, and the interface surface waviness. 相似文献
4.
ZHAO Fang-hua 《地下水科学与工程》2018,6(1):65-70
In this paper, the single hole heat transfer power of the ground source heat pump system in Hengshui is compared with data gained from thermal response test. The results show that maximum monitoring data of heat transfer power per meter in summer is 97.1% of the test data, and the average value accounts for 81.8%. The per meter heat power data through on-site thermal response test can provide references for designing engineering project and optimizing ground source heat pump system as these data do not vary greatly from the actual monitoring data. 相似文献
5.
在盾构管片壁后注浆时,由于浆液渗透压的存在,浆液会向外渗透,浆体本身逐渐固结,作用在管片上的注浆压力逐渐消散。考虑到浆液往周边地层渗透过程中由于黏度的变化会引起地层渗透系数的变化,推导了基于浆液黏度时变性的浆体固结变形方程和浆液压力消散方程,分析了浆液固结、消散及浆液压力沿管片外壁分布规律,为精细化分析施工阶段管片受力提供了计算依据。计算结果表明：浆液从注浆口喷出后,浆液黏性的增大使浆液流动性减小,注浆压力消散幅度减小,浆液消散持续时间变短。浆液配比与围岩渗透系数变化对注浆压力消散幅度及消散持续时间存在一定影响。现场实测结果与理论计算结果较为一致。在进行壁后注浆时,应充分考虑时变作用下浆液消散作用的影响。 相似文献
6.
Mwajuma Ibrahim Lingwanda Anders Prästings Stefan Larsson Dalmas L. Nyaoro 《Geomechanics and Geoengineering》2017,12(2):137-151
One of the essential inputs in settlement prediction models is the soil modulus, which may be obtained from laboratory tests or estimated from in situ measurements. The total uncertainty in predicting the confined modulus of a sandy soil is quantified with data from side-by-side in situ testing using the standard penetration test, the static cone penetration test, the light dynamic probing and the laboratory oedometer test. To estimate transformation errors, correlations are proposed between in situ and laboratory data. The results indicate that similar magnitudes of total uncertainties are associated with the in situ methods, which are approximately twice as high as those from the direct oedometer method. The quantified uncertainties are an important input for reliability-based designs of foundations under similar soil conditions. 相似文献
7.
采用理论分析和实验室测试的方法对锚固锚杆和自由锚杆中的导波传播规律进行了研究,并在频率为20 kHz～ 3 MHz范围内对锚固锚杆和自由锚杆波的传播速度进行了测试,发现锚固锚杆内不同频率的导波传播速度对锚固介质具有不同的敏感性。低频率段（20～200 kHz）的导波传播速度对锚杆锚固质量较为敏感,自由锚杆和锚固锚杆中导波的传播速度相差较大,适合于检测锚杆的锚固质量。高频率段（1～3 MHz）的导波传播速度对锚杆锚固质量不敏感,导波的传播速度基本不变,适合于锚杆完整性检测。探索了利用高频段多频率导波检测锚固锚杆长度的方法。实验室检测结果显示,本检测方法具有很高的精度 相似文献
8.
Summary Currently under study by the Department of Energy are the geologic and hydrologic characteristics of the ash-flow deposits under Yucca mountain at the Nevada test site. Of interest at this site is the potential for disposal of high-level radioactive wastes in the unsaturated zone of the densely welded portions of the tuffs. These studies include the preformance-assessment of barriers and seals for boreholes, ramps, drifts and shafts at the Yucca mountain site. In-situ tests on standard Type II Portland cement and microfine cement as grout materials have been performed on a similar rock type to Yucca Mountain's near Superior Arizona. The tests were performed in a vertical borehole drilled in highly fractured and densely welded tuff (brown unit of Apache Leap) through a series of pressurized grout applications. Packer flow tests prior to and after each grout application measure the effectiveness of the grout application in reducing the permeability of the rock surrounding the borehole. Overall the grout applications have reduced the permeability of the test hole by three orders of magnitude. 相似文献
9.
The load response of a rock-socketed steel H-pile can be strongly influenced by the nonlinear interfacial behavior between the grout and the steel H-pile, and between the pile and the rock mass. This paper focuses on the load-transfer mechanism of the former interface through experimental push-out tests and numerical simulation of the tests. The study is divided into two parts. In the first part, a series of push-out tests have been carried out on four types of specimens (with studs + confinement (Case I); no stud + confinement (Case II); no stud + no confinement (Case III); and studs + no confinement (Case IV)). The second part is a numerical study based on three-dimensional finite element technique, which takes into account possible damage and cracking in grout, as well as bond-slip along the interface. It is shown that the numerical predictions of the four cases compare favorably with the corresponding test results, including the load–displacement response and the development of cracks. Furthermore, parametric study has been carried out to investigate the influence of various factors, including the studs, the casing confinement, the grout fracture energy, and the dilation property of steel-grout interface. Lastly, some implications, based on the test and numerical results, on the design of socketed steel H-piles are discussed. 相似文献
10.
在容量法对页岩的等温吸附实验测试中,发现随压力增加吸附量呈现减小趋势,甚至出现负吸附量,测得的吸附常数Langmuir体积和Langmuir压力出现负值,与实际不相符,造成实验结果和吸附常数失去应用价值。从页岩吸附测试方法、吸附测试仪器等方面系统分析了容量法页岩吸附实验出现"倒吸"现象的原因;提出了实验中自由空间体积测试和吸附气含量计算存在的问题;并对页岩吸附实验方法和页岩吸附测试仪器提出相关建议。 相似文献
11.
预应力锚索作为岩土工程的一种主要加固技术已得到日益广泛的应用,但现有的计算方法难以反映岩体、砂浆、钢绞线相互之间的滑移变形等实际情况,计算结果难以体现实际的加固效果。通过研究接触面的特性引入损伤软化概念,建立了包含钢绞线、砂浆、接触面的损伤软化精细有限元模型,并与现场试验进行了对比分析。该模型优点是精细地描述了钢绞线、砂浆和接触面等结构的力学行为,可以反映接触面力学材料损伤软化的过程,更加精确地反映了锚固段的力学变化过程。试验结果对比显示,两者随着荷载不断加大,锚固段接触面上的剪应力峰值由端口往里转移。当端口处于弹性阶段,峰值在端口,呈指数衰减模式;当端口处出现损伤软化,峰值往里转移。计算分析反映的锚固段应力变化规律与试验基本一致。 相似文献
12.
Grouting of water-conducting fractures with low-alkali cement is foreseen for the potential future repository for spent nuclear fuel in Finland (ONKALO). A possible consequence of the interaction between groundwater and grout is the formation of high-pH solutions which will be able to react with the host rock (gneisses) and alter its mineralogy and porosity. A reactive transport modeling study of this possible alteration has been conducted. First, the hydration of the low-alkali cementitious grout has been modeled, using results from the literature as a guide. The hydrated cement is characterized by the absence of portlandite and the presence of a C-S-H gel with a Ca/Si ratio about 0.8 after tens of years (Ca/Si is about 1.7 in Ordinary Portland Cement). Second, calculations have simulated the interaction between flowing water and grout and the formation of an alkalinity plume, which flows beyond the grouted section of the fracture. The calculations include the hydration and simultaneous leaching of the grout through diffusive exchange between the porewater in the grout and the flowing water in the fracture. The formation of an alkaline plume is extremely limited when the low-pH grout is used. Even when using a grout with a lower silica fume content, the extent and magnitude of the alkaline plume is quite minor. These results are in qualitative agreement with monitoring at ONKALO. 相似文献
13.
Today, grouting is used as an aid in ground improvement in most civil and mining engineering projects. Groutability and grout penetration depth are among the most important issues that are considered in grouting operation. Various parameters such as in-situ stress, pore water pressure, joint geometric and geomechanical characteristics, grout properties (viscosity and yield stress) and technical factors such as grouting pressure and flow rate affect the groutability and grout penetration depth in a jointed rock mass. Knowledge of the effect of these parameters has advantages in the prediction of grouting results. Typically, cement-based grout is used in jointed rock masses. Unlike water, stable cement-based grout usually acts as a Bingham fluid. In this study the effect of important parameters on grouting process in a jointed rock mass was investigated numerically using the DEM method. In the conducted study, the problem geometry represents a horizontal section in a regularly jointed rock mass with two joint sets. The analyses results show that the grout penetration depth and intake increase as joint aperture, normal stiffness and grouting pressure increase and in-situ stress and pore water pressure decrease. Increase in joint spacing does not have any effect on the grout penetration depth but decreases the grout intake. The effect of joint orientation on grouting process is strongly dependent on in-situ stress state. On the other hand, increase in grout yield stress decreases the grout penetration depth and intake, while grout viscosity does not have any effect on maximum grout penetration depth and intake. To further investigate the above mechanisms, the grouting process conducted in Gotvand dam-Iran was simulated numerically. 相似文献
14.
In this paper, a testing methodology was developed in the laboratory to measure the tensile strength of large-scale incipient rock joints. In the test, an expansive grout was used to develop the tensile force. Each test comprises two phases: Phase i test and Phase ii test. The Phase i test identified sample failure time, while the Phase ii test measured the corresponding tensile force arising from the expansive grout. Ostensibly homogeneous rock samples without incipient joints were firstly tested to establish the methodology. Tensile strength of block samples containing incipient rock joints was then measured using the established testing scheme. The test results have been compared with those obtained from conventional Brazilian and uniaxial tension tests as suggested by ISRM. The proposed approach is capable of giving a measure of tensile strength of large-scale incipient rock joints, although somewhat smaller strength than that from the standard approaches was occasionally measured in the preliminary tests on ostensibly homogeneous samples. Effects of stress concentration, sample scale, loading rate and expansive tensile force on the testing results were discussed. Furthermore, this simple and practical testing scheme is proposed for the measurement of the in situ tensile strength of rock and incipient discontinuities in the field, which if successful will provide a more scientific guidance on the rock mass classification and engineering design. 相似文献
15.
注浆法是采煤沉陷区的主要治理方法，浆材对注浆效果和成本影响很大。以陕北地区黄土-水泥-添加剂混合浆液为研究对象，采用单因素及正交试验对黄土浆液的黏度、凝胶时间、结石率及28 d单轴无侧限抗压强度进行试验研究，对各指标的影响因素及变化规律进行分析，同时，建立黄土基浆液的GA-BPNN预测模型，通过GA多目标全局寻优，优选出一定强度下成本最低的浆液配比。试验结果表明:黄土水泥浆液与陕北地区普遍采用的水泥粉煤灰浆液性能相近，成本大幅降低，黄土基注浆材料密度及结石率受水固比影响最为明显，黏度主要受水固比及黄土（水泥）掺量影响，28 d强度主要受黄土（水泥）掺量影响；采用GA-BPNN构建模型预测的黄土基注浆材料性能预测值与期望值相对误差为0.74%~1.83%，预测结果精度高，可满足实际应用需求。移动阅读 相似文献
16.
Precise gravity networks and profiles have been established in three locations in Canada for the purpose of measuring possible gravity changes associated with seismic events. All measurements were made using two LaCoste and Romberg model D gravimeters. The standard deviation of a single observed gravity difference ranges from 50 to 120 nm/sec2. The precision of the measurements appears to depend mainly on the amount of exposure to vibration during transportation. A preliminary comparison between results of different instruments reveals unexplained discrepancies, and calibration tests show that the D meter scale factor varies significantly with either dial reading or reset screw position or both. 相似文献
17.
运用三维有限差分软件FLAC3D对破裂井筒的各种治理措施进行了数值模拟,分析评价了钢圈加固和喷射混凝土套壁、壁后注浆、地面注浆、开设卸压槽等各治理措施的工程效果。结果表明,钢圈加固和喷射混凝土套壁强度相对较小,适合紧急的抢险处理和防止破裂混凝土坠落,难以维持井壁的长期稳定;破壁注浆措施在一定程度上控制了井壁与土层相对位移的增大,防治井筒破裂效果良好,且预防性壁后注浆效果更为突出;地面注浆防治效果明显,在注浆孔数量不变的条件下,孔位的合理选择对保证地面注浆防治效果至关重要;卸压槽可以有效吸收纵向变形以抑制破裂井壁的发展,其开设在破裂处上部时,效果最好。分析结果可用于指导破裂井筒治理的设计与施工 相似文献
18.
集合卡尔曼滤波（Ensemble Kalman Filter,EnKF）方法已广泛应用于地下水水流和污染物运移模拟相关问题的求解。但前人研究多建立在同化系统预报模型是准确的基础上,忽视了模型概化的不确定性。当模型概化不准确时,将导致预报偏差,可能带来错误的系统估计。因此,文章提出考虑模型预报偏差的迭代式集合卡尔曼滤波（Bias aware Ensemble Kalman Filter with Confirming Option,Bias-CEnKF）方法。以地下水水流数据同化为例,研究模型概化存在不确定条件下,边界条件、初始条件、源汇项概化不准确时新方法的有效性。结果表明,当预报模型概化不准确时,使用标准EnKF方法进行数据同化,可能会导致滤波发散,造成同化失败。Bias-CEnKF方法不仅保留了较好的同化性能,同时减小了参数、变量、偏差项非线性关系带来的不一致性。针对文章中4种情景,Bias-CEnKF同化获得的含水层渗透系数场以及水头场均接近真实场,且预报结果可靠。本研究进一步提升了模型概化不确定时EnKF方法的适用性,为实际野外复杂条件下地下水水流数据同化问题提供了可靠的方法。 相似文献
19.
注浆加固是解决岛礁钙质砂地基不均匀沉降问题的有效措施之一。根据钙质砂特性,选用超细硅酸盐水泥作为主体胶凝成分,纳米硅溶胶、粉煤灰和硫酸钙晶须作为辅料,依据单因素试验和正交试验的要求,制备了不同配比的注浆材料,测试了其凝结时间和相应固结体的力学性能。采用响应曲面法对试验结果进行模拟,探究各组分对各性能指标的影响,确定注浆材料最优配比。结果表明：将3种辅料按适当比例单独加入浆材中,均可提高不同龄期钙质砂固结体的抗压强度;当水泥掺量固定时,水灰比是影响浆液凝结时间和固结体强度的最主要因素;与水泥浆液相比,以最佳配比掺入辅料配制的注浆浆液能够更好地填充在钙质砂颗粒间,从而改变固结体的密实性,使其抗压强度明显增长。研究成果可为增强钙质砂地基注浆加固效果提供参考。 相似文献