共查询到20条相似文献，搜索用时 218 毫秒
1.
为确定农坪金铜矿床的成矿流体特征及矿床形成机制,采集细脉浸染状金铜矿石中的石英--硫化物细脉,对石英颗粒中的流体包裹体进行了岩相学、显微测温和激光拉曼光谱分析。结果表明:脉石英中主要发育Ⅰ型气液两相、Ⅱ型含CO2三相、Ⅲ型含子矿物多相、Ⅳ型纯气相和Ⅴ型纯液相等5种类型的原生流体包裹体。不同类型包裹体的均一温度变化范围为237.8℃~399.4℃,主要集中于310℃~370℃,盐度w(NaCl)变化范围于1.39%~12.3%和33.32%~42.03%两个区间。代表性包裹体的激光拉曼光谱分析结果显示,成矿流体主要气相成分为H2O、CO2,并含有少量的CH4。综合研究后认为,农坪矿床成矿流体曾发生过沸腾作用,以至流体中的H2O、CO2等挥发组分大量逸出,引起金、铜等有用组分的沉淀富集。农坪金铜矿床与小西南岔金铜矿床在成矿条件及矿化特征等方面具有相似性,二者同为斑岩型金铜矿床,均属燕山晚期构造岩浆作用的产物。 相似文献
2.
湖北鸡笼山金铜矿床成矿物质来源探讨 总被引：4，自引：0，他引：4
伍超群 《大地构造与成矿学》1992,16(2):190-192
<正> 鸡笼山金铜矿床原主要开采铜矿,随着金矿研究工作的深入,本矿床被探明为大型金矿床,从而越来越引起人们的重视。尽管对此矿床研究后提出的成因类型繁多(如斑岩型、热液型、爆破角砾岩型等等),但一致认为矿床的成矿物质来源于上地幔,是单一的。笔者经过野外实地踏勘和资料整理,在前人工作成果的基础上,认为本矿床成矿物质具有壳幔混合源的特点。鸡笼山金铜矿床是丰山矿田的主要矿床 相似文献
3.
本文在研究七宝山金镇矿床基础上,系统总结了该矿床火山机构的岩浆演化及隐爆角砾岩筒的特征,并由此建立了一种严格受隐爆角砾岩筒控制、且极为富钨的特殊类型的斑岩型金铜矿床成矿模式。 相似文献
4.
宁芜盆地分布着众多热液成因的脉型金铜矿床,铜井金铜矿床是区内该类矿床的典型矿床.矿体主要呈脉状、似脉状和透镜状赋存于近北北西向压扭性断裂与古火山机构复合部位,具有等距雁行排列的特点.研究表明,铜井金铜矿床先后经历了早期石英硫化物阶段、中期石英硫化物碳酸盐阶段和晚期碳酸盐阶段.矿石中黄铜矿硫同位素δ34S平均为3.63‰,34S/32S平均为22.139,为幔源硫来源.金、铜成矿物质为白垩系娘娘山组碱性玄武安山质岩浆分异演化到晚期分熔的产物,成矿热液沿着压扭性断裂构造上升,在有利的构造空间富集成矿.流体包裹体均一温度为171~253℃,成矿深度为100~400 m.总体上,铜井金铜矿床属与构造-火山活动有关的中浅成热液充填脉型矿床. 相似文献
5.
小西南岔富金铜矿床流体包裹体中子矿物特征及意义 总被引：2，自引：0，他引：2
运用显微镜和激光拉曼技术对小西南岔富金铜矿床北山矿段流体包裹体内的子晶矿物进行了鉴定。结果表明,其子晶矿物有硬石膏、石盐、钾盐以及黄铜矿等,这种特征反映该矿床的含矿流体为高盐、高氧化流体和还原流体,为进一步研究该矿床流体性质和矿床的成因提供了重要依据。 相似文献
6.
通过对金口岭金铜矿床原生晕的研究,归纳出该矿床的指示元素组合特征及其分带模式,用于矿区指导找矿取得了好效果. 相似文献
7.
宁芜盆地发育一系列与火山—岩浆侵入作用有关的热液脉型金铜矿床(点),大岭岗金铜矿床属区内该类矿床。矿体主要赋存于NNW向张扭性断裂带中,呈脉状、复脉状、透镜状产出。大岭岗金铜矿床的蚀变和矿化划分为三个阶段：早期石英阶段、中期石英碳酸盐硫化物阶段和晚期石英碳酸盐重晶石阶段。大岭岗金铜矿床与燕山晚期岩浆活动有着密切的联系,岩浆发展的晚期阶段,从次火山岩(闪长玢岩)中分离出来的富含S、Cu、Fe、Co、Au等元素热液沿着断裂带及其派生的次生裂隙流向各方,与安山质火山岩中的水溶液或下渗的大气水混合,萃取地层成矿物质,使之活化转移,在有利的环境中富集成矿。大岭岗金铜矿床属次火山岩中低温热液脉型金铜矿床。大岭岗金铜矿区成矿地质背景良好,成矿条件优越,通过攻深找盲,寻找新的工业矿体的潜力巨大。 相似文献
8.
9.
江西波阳莲花山萤石矿床地质特征及矿床成因探讨 总被引：4，自引：0，他引：4
莲花山萤石矿床是一个规模大，品位富，矿体相对集中，易采选，轻富经济价值的矿床。矿床位于花岗岩体的内接触带，花岗岩体及ＮＥ向断裂同时控制着矿体的产出。矿石类型以单一萤石型为主，次为石英－萤石型。矿体与围岩界线清晰，属中－低温热液充填型矿床。 相似文献
10.
南华砷铊矿床雄黄标型特征 总被引：2，自引：1，他引：2
雄黄是云南省南华砷铊矿床中最主要工业矿物。它不仅与铊矿物共生，而且本身含有较高的铊，可高达（n×10～n×100）×10-6。砷铊矿床雄黄与砷矿床雄黄相比较在产出条件，微量元素、硫同位素和晶面间距等方面均有不同程度差别。前者富铊，低氯、高氟和硼，富轻硫同位素，相对贫稀土元素；后春富氯，低铊，高碘，富重硫同位素，相对贫碱土族元素。这些标型特征不仅有助于南华砷铊矿床进一步开发，而且有助于含雄黄的热液矿床，特别是As、Hg、Tl、Sb、Au等矿床的找矿勘探。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
15.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献