首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献，搜索用时 78 毫秒
1.
Interaction of various physical, chemical and biological transport processes plays an important role in deciding the fate and migration of contaminants in groundwater systems. In this study, a numerical investigation on the interaction of various transport processes of BTEX in a saturated groundwater system is carried out. In addition, the multi-component dissolution from a residual BTEX source under unsteady flow conditions is incorporated in the modeling framework. The model considers Benzene, Toluene, Ethyl Benzene and Xylene dissolving from the residual BTEX source zone to undergo sorption and aerobic biodegradation within the groundwater aquifer. Spatial concentration profiles of dissolved BTEX components under the interaction of various sorption and biodegradation conditions have been studied. Subsequently, a spatial moment analysis is carried out to analyze the effect of interaction of various transport processes on the total dissolved mass and the mobility of dissolved BTEX components. Results from the present numerical study suggest that the interaction of dissolution, sorption and biodegradation significantly influence the spatial distribution of dissolved BTEX components within the saturated groundwater system. Mobility of dissolved BTEX components is also found to be affected by the interaction of these transport processes.  相似文献   

2.
Analysis of contaminant transport through fractured crystalline rocks has received considerable attention, particularly with regard to subsurface nuclear waste repositories. Most of the studies have employed the dual continuum approach, with the fractures and the rock matrix as the two continuums, assuming that fractures control the overall conductivity of the rock and the porous matrix just provides storage. However, field observations of rock fractures have shown that the real situation can be very complex. Based on some recent investigations, it has been reported that the portion of the rock matrix adjacent to many open fractures is physically and chemically altered. These alterations, referred to as the fracture skin, can have different sorption and diffusion properties compared to those of the undisturbed rock matrix and this may influence the transport of solutes through such formations. In the present study, a numerical model is developed to simulate conservative solute transport in a fractured crystalline rock formation using the triple continuum approach ?? with the fracture, fracture skin and the rock matrix as the three continuums. The model is solved using a fully implicit finite difference scheme. Contaminant migration in the fractured formation with and without skin has been simulated. It is observed that contaminant penetration along the fracture is enhanced at large flow velocities. The effect of flow velocity on conservative solute transport is investigated for different fracture apertures and fracture skin thicknesses. The influence of flow velocity on contaminant transport is demonstrated to be more with change in fracture aperture than with change in skin thickness.  相似文献   

3.
Contaminant transport through fractured rock mass is predominated by diffusion. This is due to the continuous interaction of the mobile water present in the fracture network and relatively immobile pore water, which is adsorbed on the surface and in the rock matrix itself. Even though the advective flow through the fracture network is high, besides sorption of rock mass, the diffusive exchange into the rock mass leads to significant retardation of contaminant transport. Hence, for describing contaminant transport in fractured rock mass, more precisely, the effect of retardation attributed to the matrix diffusion must be taken in account. With this in view, a methodology, which can be employed for determination of the diffusion characteristics of the rock mass, has been developed and its details are presented in this paper. Validation of the methodology has been demonstrated with the help of Archie’s law.  相似文献   

4.
裂隙岩体中非饱和渗流与运移的概念模型及数值模拟   总被引：12，自引：2，他引：12  
探讨了裂隙岩体中非饱和地下水渗流与溶质运移的几种概念模型的构造及数值模拟问题 ,如裂隙网络模型、连续体模型、等效连续体模型、双孔隙度 (单渗透率 )模型、双渗透率模型、多组份连续体模型等。在裂隙岩体中 ,非饱和地下水的渗流可能只局限于岩体中的岩石组份、或裂隙网络 ,也可能在裂隙和岩石中同时发生 ;对前一种情形只需考虑单一连续体中的流动 ,而后一种情况则需要包括地下水在岩石和裂隙之间的交换。岩体中的裂隙网络往往是溶质运移的主要通道 ;但当溶质在裂隙与岩石之间的渗透和扩散是重要的运移机制时 ,就需要考虑岩石与裂隙界面处的溶质交换。为了模拟岩石与裂隙之间地下水和溶质的交换 ,就需要了解岩石与裂隙之间相互作用的模式和范围 ,使得这类问题的概念模型较单一连续体模型多了一层不确定性、其数值模拟也变得更为困难。因为在实际问题中不易、甚至根本不能判别非饱和渗流的实际形态 ,具体采用哪种模型主要取决于分析的目的和对现场数据的掌握程度。不论哪种模型都会受到模型及参数不确定性的影响 ,因此必须考虑与其他辅助模型的比较.  相似文献   

5.
Two-dimensional reactive transport modeling of the Maqarin Eastern Springs site, a natural analogue for the alteration of a fractured limestone by high-pH Portland cement waters, has been performed using the CrunchFlow code. These 2D calculations included transport by advection–dispersion–diffusion along a single fracture and diffusion in the wall rock. Solute transport was coupled to mineral dissolution and precipitation. A limited sensitivity analysis evaluated the effect of different values of primary mineral surface areas, flow velocity and sulfate concentration of the inflowing high-pH solution.Major secondary minerals include ettringite–thaumasite, C–S–H/C–A–S–H and calcite. C–S–H/C–A–S–H precipitation is controlled by the dissolution of primary silicates. Ettringite precipitation is controlled by diffusion of sulfate and aluminum from the wall rock to the fracture, with aluminum provided by the dissolution of albite. Calcite precipitation is controlled by diffusion of carbonate from the wall rock. Extents of porosity sealing along the fracture and in the fracture-wall rock interface depend on assumptions regarding flow velocity and composition of the high-pH solution. The multiple episodes of fracture sealing and reactivation evidenced in the fracture infills were not included in the simulations. Results can qualitatively reproduce the reported decrease in porosity in the fractures and in the wall rock next to the fractures. Instances of porosity increase next to fractures caused by carbonate dissolution were not reproduced by the calculations.  相似文献   

6.
A stochastic discrete-fracture model was used by Cacas et al.a,b to interpret flow measurements and transport experiments in a fractured crystalline rock mass at Fanay-Augères. They considered continuum models to be incapable of properly interpreting small-scale measurements or tracer tests in fractured systems, which, in their view, require three-dimensional modeling of numerous discrete channels; in their opinion, continuum modeling applies only to average flow on a relatively large scale. Cacas et al. considered their discrete fracture model to have been validated by its demonstrated ability to reproduce selected experimental results. In this paper, flow and transport at Fanay-Augères are modeled by viewing the fractured rock as a stochastic continuum in a manner originally proposed by Neumanc,d. The stochastic continuum approach obviates the need for detailed information about fracture geometry or assumptions about how individual fractures control flow and transport. All it requires is the delineation of a few dominant features, which can be embedded into the stochastic continuum model as heterogeneous porous slabs. Though a fault zone has been identified at the Fanay-Augères experimental site, it has been modeled neither by Cacas et al. nor in this paper. In fact, in this paper, a larger selection of experimental results than those considered by Cacas et al. are reproduced merely by modeling the rock as a statistically homogeneous continuum in two dimensions. These results demonstrate that a continuum approach may be well suited for the analysis of flow and transport in fractured rock. This does not constitute a validation of the continuum approach, just as the results of Cacas et al. fall short of validating the discrete fracture approach. Instead, the two sets of results illustrate jointly the well-established principle that an open system, especially one as complex as fractured hydrogeologic environments tend to be, cannot be described uniquely on the basis of sparse data and need not be described in great detail to capture its salient behavior by a model.a Cacas MC, Ledoux E, de Marsily G, Barbreau A, Calmels P, Gaillard B, Margritta R (1990a) Modelling fracture flow with a stochastic discrete fracture network: calibration and validation. 1. The flow model. Water Resour Res 26(3):479–489b Cacas MC, Ledoux E, de Marsily G, Barbreau A, Calmels P, Gaillard B, Margritta R (1990b) Modelling fracture flow with a stochastic discrete fracture network: calibration and validation. 2. The transport model. Water Resour Res 26(3):491–500c Neuman SP (1987) Stochastic continuum representation of fractured rock permeability as an alternative to the REV and fracture network concepts, in Rock Mechanics. In: Farmer IW, Daemen JJK, Desai CS, Glass CE, Neuman SP (eds) Proceedings of the 28th U.S. Symposium, Tucson, Arizona. Balkema, Rotterdam, pp 533–561d Neuman SP (1988) A proposed conceptual framework and methodology for investigating flow and transport in Swedish crystalline rocks. SKB Swedish Nuclear Fuel and Waste Management Co., Stockholm, September, Arbetsrapport 88–37, 39 pp  相似文献   

7.
Quantification of mass and heat transport in fractured porous rocks is important to areas such as contaminant transport, storage and release in fractured rock aquifers, the migration and sorption of radioactive nuclides from waste depositories, and the characterization of engineered heat exchangers in the context of enhanced geothermal systems. The large difference between flow and transport characteristics in fractures and in the surrounding matrix rock means models of such systems are forced to make a number of simplifications. Analytical approaches assume a homogeneous system, numerical approaches address the scale at which a process is operating, but may lose individual important processes due to averaging considerations. Numerical stability criteria limit the contrasts possible in defining material properties. Here, a hybrid analytical–numerical method for transport modeling in fractured media is presented. This method combines a numerical model for flow and transport in a heterogeneous fracture and an analytical solution for matrix diffusion. By linking the two types of model, the advantages of both methods can be combined. The methodology as well as the mathematical background are developed, verified for simple geometries, and applied to fractures representing experimental field conditions in the Grimsel rock laboratory.  相似文献   

8.
Mechanical and hydraulic properties of rocks related to induced seismicity   总被引：1，自引：0，他引：1  
Witherspoon, P.A. and Gale, J.E., 1977. Mechanical and hydraulic properties of rocks related to induced seismicity. Eng. Geol., 11(1): 23–55.The mechanical and hydraulic properties of fractured rocks are considered with regard to the role they play in induced seismicity. In many cases, the mechanical properties of fractures determine the stability of a rock mass. The problems of sampling and testing these rock discontinuities and interpreting their non-linear behavior are reviewed. Stick slip has been proposed as the failure mechanism in earthquake events. Because of the complex interactions that are inherent in the mechanical behavior of fractured rocks, there seems to be no simple way to combine the deformation characteristics of several sets of fractures when there are significant perturbations of existing conditions. Thus, the more important fractures must be treated as individual components in the rock mass.In considering the hydraulic properties, it has been customary to treat a fracture as a parallel-plate conduit and a number of mathematical models of fracture systems have adopted this approach. Non-steady flow in fractured systems has usually been based on a two-porosity model, which assumes the primary (intergranular) porosity contributes only to storage and the secondary (fracture) porosity contributes only to the overall conductivity. Using such a model, it has been found that the time required to achieve quasi-steady state flow in a fractured reservoir is one or two orders of magnitude greater than it is in a homogeneous system. In essentially all of this work, the assumption has generally been made that the fractures are rigid.However, it is clear from a review of the mechanical and hydraulic properties that not only are fractures easily deformed but they constitute the main flow paths in many rock masses. This means that one must consider the interaction of mechanical and hydraulic effects. A considerable amount of laboratory and field data is now available that clearly demonstrates this stress-flow behavior. Two approaches have been used in attempting to numerically model such behavior: (1) continuum models, and (2) discrete models. The continuum approach only needs information as to average values of fracture spacing and material properties. But because of the inherent complexity of fractured rock masses and the corresponding decrease in symmetry, it is difficult to develop an equivalent continuum that will simulate the behavior of the entire system. The discrete approach, on the other hand, requires details of the fracture geometry and material properties of both fractures and rock matrix. The difficulty in obtaining such information has been considered a serious limitation of discrete models, but improved borehole techniques can enable one to obtain the necessary data, at least in shallow systems. The possibility of extending these methods to deeper fracture systems needs more investigation. Such data must be considered when deciding whether to use a continuum or discrete model to represent the interaction of rock and fluid forces in a fractured rock system, especially with regard to the problem of induced seismicity. When one is attempting to alter the pressure distribution in a fault zone by injection or withdrawal of fluids, the extent to which this can be achieved will be controlled in large measure by the behavior of the fractures that communicate with the borehole. Since this is essentially a point phenomenon, i.e., the changes will propagate from a relatively small region around the borehole, the use of a discrete model would appear to be preferable.  相似文献   

9.
This paper describes the occurrence and distribution of U within groundwater of the Ili basin in Xinjiang, China. Dissolved major ions, dissolved gases, pH, Eh and salinity in groundwater were employed to distinguish different hydrogeochemical environments and associated processes affecting U transport within the aquifer. The results show that dissolution and deposition of U by groundwater are closely related to reactions with organic C and minerals such as sulfides, carbonates and silicates along groundwater flow paths. Different chemical reactions predominate and account for changes in the occurrence of U in the rock and water of the oxidized zone, the redox transition zone, and the reduced zone. Knowledge of these associations between U and hydrogeochemical environments could enhance the understanding of relationships of groundwater circulation and U mineralization and could have implications for prospecting for sandstone-type U deposits.  相似文献   

10.
岩体裂隙系统渗流场与应力场耦合模型   总被引：15，自引：0，他引：15  
岩体系统具有复杂的结构。一般认为，岩体系统是非均质各向异性不连续的多相介质体系。当岩体以裂隙为主，且其分布较密集时，可将岩体系统看作等效连续多相介质体系。本文运用等效连续介质理论，提出了两种岩体裂隙系统渗流场与应力场耦合模型：一是以渗透水压力与隙变形关系、应力与渗透系统数关系为基础，建立渗透系数张量计算公式，进而建立等效效连续介质渗流为数学模型。以裂隙岩体应变张量分析为基础，建立裂隙岩体效应力张量  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号