首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
张静  张宝民  单秀琴 《地质通报》2017,36(4):664-675
塔里木、四川及鄂尔多斯盆地是中国中西部海相白云岩的主要发育地区。三大盆地重点层系海相白云岩新近的成因研究表明,大规模准同生白云岩和埋藏成因白云岩的发育均与蒸发台地密切相关。蒸发台地中由海水浓缩形成的富Mg~(2+)卤水一方面在准同生期,通过蒸发泵和下渗机制交代碳酸钙沉积物而形成与蒸发岩共生的准同生白云岩,另一方面作为富含Mg~(2+)的地层孔隙水,在准同生-浅埋藏期乃至中、深埋藏期,通过侧向渗透、侧向与垂向压实排挤和垂向热对流机制与粗结构的碳酸钙沉积物发生交代反应,在蒸发岩系周边和上下形成广泛分布的埋藏成因白云岩。与热流体作用有关的白云石化主要依靠构造断裂、裂缝、不同级次的层序界面、孔洞层等输导体系发生,分布较局限。热流体云化常表现为对先期白云岩进行叠加改造而形成热水改造白云岩。热流体性质不一,可以是深埋藏混合热水、深部循环水、地幔深部的岩浆热液等。白云石(岩)的生物成因不仅表现为微生物作用导致白云石直接沉淀,还表现为生物的存在与活动为白云石化作用提供Mg~(2+)和云化流体通道。由微生物和宏观藻释放出Mg~(2+),在埋藏期对方解石进行交代是各种富含藻类的灰岩中部分白云石的重要形成机制。生物扰动可明显改善岩石的孔渗性,从而显著促进白云石化作用的发生。  相似文献   

2.
塔里木盆地东部地区寒武系白云岩成因类型*   总被引：3，自引：0，他引：3       下载免费PDF全文
塔里木盆地东部地区（简称塔东地区）寒武系白云岩主要有泥-粉晶白云岩、细晶白云岩和中-粗晶白云岩。通过岩石学特征、有序度、碳氧同位素、锶同位素比值、阴极发光和微量元素等分析,认为该地区有4种成因的白云岩,即深水回流准同生白云岩、潮坪蒸发泵准同生白云岩、回流渗透白云岩以及深埋藏白云岩。不同类型的白云岩,其岩性及地球化学特征不同。深水回流准同生白云岩为泥-粉晶白云岩,分布在塔东盆地中,是附近的碳酸盐岩台地上蒸发浓缩形成的咸化海水在重力作用下沿海底回流到深水盆地中并使刚沉积不久的灰泥发生白云化而形成的。潮坪蒸发泵准同生白云岩亦为泥-粉晶白云岩,形成于台地潮坪环境。回流渗透白云岩为细晶白云岩,发育于潮坪准同生白云岩和蒸发岩之下。深埋藏白云岩为中-粗晶白云岩,是石灰岩在地下深处由循环流动的富含Mg2+、Ca2+的地层水白云化形成的,Mg2+、Ca2+主要来自于已经存在的白云岩的溶蚀,而非来自页岩压实排替出来的地层水。  相似文献   

3.
We clarified three stages of dolomitization and secondary changes by studying the petrology and geochemistry characteristics of dolomite from the Ma55–Ma510 sub-members of the Ordovician Majiagou Formation in the Jingxi area in the Ordos Basin: (1) Syngenetic microbial dolomitization is characterized by formation of dolomite with a mainly micrite structure and horse tooth-shape dolomite cements. (2) Seepage reflux dolomitization during the penecontemporaneous period superposed adjustment functions such as recrystallization and stabilization in the middle-deep burial stage, forming dolomites mainly consisting of micro crystal and powder crystal structure. (3) Powder dolomite, fine dolomite, and medium-coarse crystalline dolomite formed in pores and fractures in the middle-deep burial stage. The secondary concussive transgression-regression under a regressive background is an important condition for the occurrence of many stages of dolomitization in the study area. The basin was an occlusive epicontinental sea environment in the Ma5 member of the Ordovician Majiagou Formation sedimentary period. In the sediments, sulfate content was high, which is conducive to the preservation of microbial activity and microbial dolomitization. Micritic dolomite formed by microbial dolomitization provides good migration pathways for seepage reflux dolomitization. Affected by evaporation seawater with increased Mg/Ca ratio, seepage reflux dolomitization was widely developed and formed large-scale dolomite, and underwater uplifts and slopes are favorable areas for dolomite. In the middle-deep burial stage, dolomitizing fluid in the stratum recrystallized or stabilized the previous dolomite and formed a small amount of euhedral dolomite in the pores and fractures.  相似文献   

4.
The Trigonodus Dolomit is the dolomitized portion of the homoclinal ramp sediments of the Middle Triassic Upper Muschelkalk in the south‐east Central European Basin. Various dolomitizing mechanisms, followed by recrystallization, have been previously invoked to explain the low δ18O, high 87Sr/86Sr, extensive spatial distribution and early nature of the replacive matrix dolomites. This study re‐evaluates the origin, timing and characteristics of the dolomitizing fluids by examining petrographic and isotopic trends in the Trigonodus Dolomit at 11 boreholes in northern Switzerland. In each borehole the ca 30 m thick unit displays the same vertical trends with increasing depth: crystal size increase, change from anhedral to euhedral textures, ultraviolet‐fluorescence decrease, δ18OVPDB decrease from ?1·0‰ at the top to ?6·7‰ at the base and an 87Sr/86Sr increase from 0·7080 at the top to 0·7117 at the base. Thus, dolomites at the top of the unit record isotopic values similar to Middle Triassic seawater (δ18OVSMOW = 0‰; 87Sr/86Sr = 0·70775) while dolomites at the base record values similar to meteoric groundwaters from the nearby Vindelician High (δ18OVSMOW = ?4·0‰; 87Sr/86Sr = >0·712). According to water–rock interaction modelling, a single dolomitizing or recrystallizing fluid cannot have produced the observed isotopic trends. Instead, the combined isotopic, geochemical and petrographic data can be explained by dolomitization via seepage‐reflux of hypersaline brines into dense, horizontally‐advecting groundwaters that already had negative δ18O and high 87Sr/86Sr values. Evidence for the early groundwaters is found in meteoric calcite cements that preceded dolomitization and in fully recrystallized dolomites with isotopic characteristics identical to the groundwaters following matrix dolomitization. This study demonstrates that early groundwaters can play a decisive role in the formation and recrystallization of massive dolomites and that the isotopic and textural signatures of pre‐existing groundwaters can be preserved during seepage‐reflux dolomitization in low‐angle carbonate ramps.  相似文献   

5.
The upper Palaeocene–lower Eocene Umm er Radhuma Formation in the subsurface of Qatar is dominated by subtidal carbonate depositional packages overlain by bedded evaporites. In Saudi Arabia and Kuwait, peritidal carbonate depositional sequences with intercalated evaporites and carbonates in Umm er Radhuma have been previously interpreted to have been dolomitized via downward reflux of hypersaline brines. Here, textural, mineralogical and geochemical data from three research cores in Qatar are presented which, in contrast, are more consistent with dolomitization by near-normal marine fluids. Petrographic relationships support a paragenetic sequence whereby dolomitization occurred prior to the formation of all other diagenetic mineral phases, including chert, pyrite, palygorskite, gypsum, calcite and chalcedony, which suggests that dolomitization occurred very early. The dolomites occur as finely crystalline mimetic dolomites, relatively coarse planar-e dolomites, and coarser nonplanar dolomites, all of which are near-stoichiometric (50.3 mol% MgCO3) and well-ordered (0.73). The dolomite stable isotope values (range −2.5‰ to +1‰; mean δ18O = −0.52‰) and trace element concentrations (Sr = 40 to 150 ppm and Na = 100 to 600 ppm) are compatible with dolomitization by near-normal seawater or mesohaline fluids. Comparisons between δ18O values from Umm er Radhuma dolomite and the overlying Rus Formation gypsum further suggest that dolomitization did not occur in fluids related to Rus evaporites. This study provides an example of early dolomitization of evaporite-related carbonates by near-normal seawater rather than by refluxing hypersaline brines from overlying bedded evaporites. Further, it adds to recent work suggesting that dolomitization by near-normal marine fluids in evaporite-associated settings may be more widespread than previously recognized.  相似文献   

6.
Abstract Interpretation of seepage reflux dolomitization is commonly restricted to intervals containing evaporites even though several workers have modelled reflux of mesosaline brines. This study looked at the partially dolomitized forereef facies of the Capitan Formation to test the extent of reflux dolomitization and evaluate the possible role of the near‐backreef mesosaline carbonate lagoon as an alternative source of dolomitizing fluids. The Capitan Formation forereef facies ranges from 10% to 90% dolomite. Most of the dolomite is fabric preserving and formed during early burial after marine cementation, before and/or during evaporite cementation and before stylolitization. Within the forereef facies, dolomite follows depositional units, with debris‐flow and grain‐flow deposits the most dolomitized and turbidity‐current deposits the least. The amount of dolomite increases with stratigraphic age and decreases downslope. Within the reef facies, dolomite is restricted to haloes around fractures and primary cavities except where the reef facies lacks marine cements and, in contrast, is completely dolomitized. This dolomite distribution supports dolomitization by sinking fluids. Oxygen isotopic values for fabric‐preserving dolomite (δ18O = 0·9 ± 1·0‰, N = 101) support dolomitization by sea water to isotopically enriched sea water. These values are closer to the near‐backreef dolomite (δ18O = 2·1 ± 0·7‰, N = 48) than the hypersaline backreef dolomite (δ18O = 3·6 ± 0·9‰, N = 11). Therefore, the fabric‐preserving dolomite is consistent with dolomitization during seepage reflux of mainly mesosaline brines derived from the near‐backreef carbonate lagoon. The occurrence of mesosaline brine reflux in the Capitan Formation has important implications for dolomitization in forereef facies and elsewhere. First, any area with a restricted carbonate lagoon may be dolomitized by refluxing brines even if there are no evaporite facies present. Secondly, such brines may travel significant distances vertically provided permeable pathways (such as fractures) are present. Therefore, the absence of immediately overlying evaporite or restricted facies is not sufficient cause to eliminate reflux dolomitization from consideration.  相似文献   

7.
塔里木盆地寒武系盐下白云岩作为重要的战略接替区已成为近年来的研究热点。前人主要集中对寒武系白云岩的形成机制和膏盐岩的封盖作用进行了研究,而关于膏盐岩对白云岩储层的影响则少有涉及。本文总结了塔里木盆地寒武系白云岩储层特征,同时探讨了膏盐岩对白云岩储层的影响机制,以期为寒武系盐下白云岩勘探提供指导。塔里木盆地寒武系白云岩主要分为结晶白云岩和微生物白云岩两大类,其中结晶白云岩又可分为泥微晶白云岩、晶粒白云岩和颗粒白云岩,微生物白云岩又可分为凝块石白云岩、叠层石白云岩和泡沫绵石白云岩。受膏盐岩影响的白云岩储层类型可划分为膏溶孔型白云岩储层、晶间孔型白云岩储层和溶蚀孔型白云岩储层。蒸发潮坪环境中,膏盐岩的沉淀有利于克服白云石化的Mg2+的动力学障碍而形成白云岩,同时,微生物作用下SO24-的还原会促进白云石的沉淀。膏盐岩对白云岩储层孔隙的影响主要体现在:含硬石膏结核泥粉晶白云岩易于形成膏溶孔型白云岩储层;膏盐层较高的热导率有利于倒退溶蚀作用的发生;近地表低温条件下硫酸盐的溶解有利于白云石的沉淀;热化学硫酸盐还原作用形成酸性气体有利于深埋溶蚀作用,形成溶蚀孔型白云岩储层。  相似文献   

8.
Reactive-transport models are developed here that produce dolomite via two scenarios: primary dolomite (no CaCO3 dissolution involved) versus secondary dolomite (dolomitization, involving CaCO3 dissolution). Using the available dolomite precipitation rate kinetics, calculations suggest that tens of meters of thick dolomite deposits cannot form at near room temperature (25-35°C) by inorganic precipitation mechanism, though this mechanism will provide dolomite aggregates that can act as the nuclei for dolomite crystallization during later dolomitization stage. Increase in supersaturation, Mg+2/Ca+2 ratio and CO3-2 on the formation of dolomite at near room temperature are subtle except for temperature.This study suggests that microbial mediation is needed for appreciable amount of primary dolomite formation. On the other hand, reactive-transport models depicting dolomitization (temperature range of 40 to 200°C) predicts the formation of two adjacent moving coupled reaction zones (calcite dissolution and dolomite precipitation) with sharp dolomitization front, and generation of >20% of secondary porosity. Due to elevated temperature of formation, dolomitization mechanism is efficient in converting existing calcite into dolomite at a much faster rate compared to primary dolomite formation.  相似文献   

9.
The partly dolomitized Swan Hills Formation (Middle‐Upper Devonian) in the Simonette oil field of west‐central Alberta underwent a complex diagenetic history, which occurred in environments ranging from near surface to deep (>2500 m) burial. Five petrographically and geochemically distinct dolomites that include both cementing and replacive varieties post‐date stylolites in limestones (depths >500 m). These include early planar varieties and later saddle dolomites. Fluid inclusion data from saddle dolomite cements (Th=137–190 °C) suggest that some precipitated at burial temperatures higher than the temperatures indicated by reflectance data (Tpeak=160 °C). Thus, at least some dolomitizing fluids were ‘hydrothermal’. Fluorescence microscopy identified three populations of primary hydrocarbon‐bearing fluid inclusions and confirms that saddle dolomitization overlapped with Upper Cretaceous oil migration. The source of early dolomitizing fluids probably was Devonian or Mississippian seawater that was mixed with a more 87Sr‐rich fluid. Fabric‐destructive and fabric‐preserving dolostones are over 35 m thick in the Swan Hills buildup and basal platform adjacent to faults, thinning to less than 10 cm thick in the buildup between 5 and 8 km away from the faults. This ‘plume‐like’ geometry suggests that early and late dolomitization events were fault controlled. Late diagenetic fluids were, in part, derived from the crystalline basement or Palaeozoic siliciclastic aquifers, based on 87Sr/86Sr values up to 0·7370 from saddle dolomite, calcite and sphalerite cements, and 206Pb/204Pb of 22·86 from galena samples. Flow of dolomitizing and mineralizing fluids occurred during burial greater than 500 m, both vertically along reactivated faults and laterally in the buildup along units that retained primary and/or secondary porosity.  相似文献   

10.
Fault-controlled hydrothermal dolomitization in tectonically complex basins can occur at any depth and from different fluid compositions, including ‘deep-seated’, ‘crustal’ or ‘basinal’ brines. Nevertheless, many studies have failed to identify the actual source of these fluids, resulting in a gap in our knowledge on the likely source of magnesium of hydrothermal dolomitization. With development of new concepts in hydrothermal dolomitization, the study aims in particular to test the hypothesis that dolomitizing fluids were sourced from either seawater, ultramafic carbonation or a mixture between the two by utilizing the Cambrian Mount Whyte Formation as an example. Here, the large-scale dolostone bodies are fabric-destructive with a range of crystal fabrics, including euhedral replacement (RD1) and anhedral replacement (RD2). Since dolomite is cross-cut by low amplitude stylolites, dolomitization is interpreted to have occurred shortly after deposition, at a very shallow depth (<1 km). At this time, there would have been sufficient porosity in the mudstones for extensive dolomitization to occur, and the necessary high heat flows and faulting associated with Cambrian rifting to transfer hot brines into the near surface. While the δ18Owater and 87Sr/86Sr ratios values of RD1 are comparable with Cambrian seawater, RD2 shows higher values in both parameters. Therefore, although aspects of the fluid geochemistry are consistent with dolomitization from seawater, very high fluid temperature and salinity could be suggestive of mixing with another, hydrothermal fluid. The very hot temperature, positive Eu anomaly, enriched metal concentrations, and cogenetic relation with quartz could indicate that hot brines were at least partially sourced from ultramafic rocks, potentially as a result of interaction between the underlying Proterozoic serpentinites and CO2-rich fluids. This study highlights that large-scale hydrothermal dolostone bodies can form at shallow burial depths via mixing during fluid pulses, providing a potential explanation for the mass balance problem often associated with their genesis.  相似文献   

11.
The presence of dolomite breccia patches along Wadi Batha Mahani suggests large-scale fluid flow causing dolomite formation. The controls on dolomitization have been studied, using petrography and geochemistry. Dolomitization was mainly controlled by brecciation and the nearby Hagab thrust. Breccias formed as subaerial scree deposits, with clay infill from dissolved platform limestones, during Early Cretaceous emergence. Cathodoluminescence of the dolostones indicates dolomitization took place in two phases. First, fine-crystalline planar-s dolomite replaced the breccias. Later, these dolomites were recrystallized by larger non-planar dolomites. The stable isotope trend towards depleted values (δ18O: − 2.7‰ to − 10.2‰ VPDB and δ13C: − 0.6‰ to − 8.9‰ VPDB), caused by mixing dolomite types during sampling, indicates type 2 dolomites were formed by hot fluids. Microthermometry of quartz cements and karst veins, post-dating dolomites, also yielded high temperatures. Hot formation waters which ascended along the Hagab thrust are invoked to explain type 2 dolomitization, silicification and hydrothermal karstification.  相似文献   

12.
The karst system of SW Trifilia is composed of a thick sequence of carbonate sediments, which have experienced two types of dolomitization and dedolomitization processes and comprise an extended aquifer. The application of fertilizers in the region have not only caused the degradation of the groundwater quality but also induced hydrochemical changes exerting major control on dolomitization processes. Factor analysis indicates high correlation coefficient between NH 4 + , NO 3 − , Ca2+ and Mg2+, which can be attributed to cation-exchange processes involving clay minerals. The application of a conservative mixing model showed that the calculated groundwater types indicate a cation-exchange process between NH 4 + , derived from fertilizers, and between Ca2+ and Mg2+. Mg2+ released from smectite interlayers, exchanged for NH 4 + in the groundwater and favor a dolomitization process through the partial replacement of Ca2+ in the lattice of calcite (dedolomite) contained in precursor dolomites. This recent stage dolomitization occurred near the water level and within the phreatic zone only and had not influenced the whole karst massif; it also resulted in low Mg/Ca values found in the zone characterized by intensive application of nitrogen-based fertilizers and the absence of overlying impermeable strata.  相似文献   

13.
安芳  朱永峰 《岩石学报》2010,26(8):2275-2286
京希-伊尔曼德金矿位于新疆北天山吐拉苏盆地的西北缘,赋存于泥盆纪-早石炭世火山-沉积地层底部的凝灰岩、凝灰质砂岩中,围岩经历了绢云母化、黄铁矿化、多期硅化和角砾化、碳酸盐化和重晶石化,金矿化与硅化围岩紧密伴生。矿体呈透镜状、层状和似层状,产状与围岩基本一致,主要由热液角砾岩型矿石组成,其热液演化期由四个阶段组成:I:硅化及绢云母化——在围岩凝灰岩和凝灰质砂岩中形成大量浸染状石英、绢云母和少量黄铁矿;II:角砾化及硅化——形成含金热液角砾岩a,角砾为早期蚀变围岩,胶结物为烟灰色玉髓状石英、黄铁矿、毒砂和少量金矿物;III:角砾化及硅化——形成含金热液角砾岩b,角砾为热液角砾岩a和蚀变围岩,胶结物为细粒石英、黄铁矿、毒砂和少量金矿物;IV:方解石-重晶石阶段——形成大量粗大的方解石-重晶石脉。京希-伊尔曼德金矿成矿流体本身富集V、Cr、Ni、Cu、Sb,且其中的Mn、Co、Zn、Bi以及大离子亲石元素LILE主要来自火山岩围岩。从成矿早期到晚期,成矿流体轻稀土元素逐渐富集、氧化性增强。水-岩体系氢、氧同位素组成模拟计算表明,京希-伊尔曼德金矿成矿流体主要为与区内火山岩再平衡的岩浆水,其中金浓度为1×10-6～2×10-6,形成该矿需要约1×108～0.5×108t岩浆热液,蚀变围岩和矿石中黄铁矿富集轻稀土元素。角砾化作用及其伴随的氧逸度升高是导致金沉淀的主要机制。  相似文献   

14.
《Sedimentology》2018,65(6):1973-2002
Dolomitization is commonly associated with crustal‐scale faults, but tectonic rejuvenation, diagenetic overprinting and a fluid and Mg mass‐imbalance often makes it difficult to determine the dolomitization mechanism. This study considers differential dolomitization of the Eocene Thebes Formation on the Hammam Faraun Fault block, Gulf of Suez, which has undergone a simple history of burial and exhumation as a result of rifting. Stratabound dolostone bodies occur selectively within remobilized sediments (debrites and turbidites) in the lower Thebes Formation and extend into the footwall of, and for up to 2 km away from, the Hammam Faraun Fault. They are offset by the north–south trending Gebel fault, which was active during the earliest phases of rifting, suggesting that dolomitization occurred between rift initiation (26 Ma) and rift climax (15 Ma). Geochemical data suggest that dolomitization occurred from evaporated (ca 1·43 concentration) seawater at less than ca 80°C. Geothermal convection is interpreted to have occurred as seawater was drawn down surface‐breaching faults into the Nubian sandstone aquifer, convected and discharged into the lower Thebes Formation via the Hammam Faraun Fault. Assuming a ca 10 Myr window for dolomitization, a horizontal velocity of ca 0·7 m year−1 into the Thebes Formation is calculated, with fluid flux and reactivity likely to have been facilitated by fracturing. Although fluids were at least marginally hydrothermal, stratabound dolostone bodies do not contain saddle dolomite and there is no evidence of hydrobrecciation. This highlights how misleading dolostone textures can be as a proxy for the genesis and spatial distribution of such bodies in the subsurface. Overall, this study provides an excellent example of how fluid flux may occur during the earliest phases of rifting, and the importance of crustal‐scale faults on fluid flow from the onset of their growth. Furthermore, this article presents a mechanism for dolomitization from seawater that has none of the inherent mass balance problems of classical, conceptual models of hydrothermal dolomitization.  相似文献   

15.
Post-Variscan hydrothermal base-metal mineralization of the Taunus ore district, SE Rhenish Massif (Germany), has been studied through combination of stable (S, C, O) and radiogenic (Pb) isotope geochemistry. Based on field and textural observations, five hydrothermal mineralization types can be distinguished. These are (1) tetrahedrite–tennantite bearing quartz–ankerite veins, (2) quartz veins with Pb–Zn–Cu ores, (3) giant quartz veins, (4) metasomatic dolomite in Devonian reef complexes, and (5) calcite–(quartz) mineralization in Devonian reefs. The δ18OV-SMOW quartz values of base-metal veins are in the range of 18.0–21.5‰, whereas those of giant quartz veins have lower values of 15.9–18.6‰. This difference reflects the higher fluid fluxes and smaller extent of rock-buffering for the giant quartz veins. Hydrothermal carbonates from the tetrahedrite and Pb–Zn–Cu veins have variable but distinctly negative δ13CV-PDB values. They can be explained by contributions from fluids that had picked up low δ13CV-PDB carbon via oxidation of organic matter and from fluids that interacted with Devonian reef carbonate having positive δ13CV-PDB. Metasomatic dolomite has positive δ13CV-PDB values that closely reflect those of the precursor limestone. By contrast, carbonates of calcite–(quartz) mineralization have negative δ13CV-PDB values which are negatively correlated with the δ18O values. This pattern is explained by fluid mixing processes where contributions from descending cooler fluids with rather low salinity were dominant. The isotope data suggest that tetrahedrite veins, Pb–Zn–Cu veins, and giant quartz veins formed from fluid mixing involving two end-members with contrasting chemical features. This is supported by fluid inclusion data (Adeyemi, 1982) that show repeated alternation between two different types of fluid inclusions, which are hotter intermediate- to high-salinity NaCl–CaCl2 fluids and cooler low-salinity NaCl-dominated fluids. The metal-rich saline fluids were likely generated at the boundary between the pre-Devonian basement and the overlying Devonian–Carboniferous nappe pile. Fault activation resulted in strong fluid focusing and upward migration of large volumes of hot Na–Ca brines, which mixed with cooler and more dilute fluids at shallower crustal levels. Variable contributions from both fluid types, local fluid fluxes, temperature variations, and variations in pH and oxidation state have then controlled the vein mineralogy and metal inventory.  相似文献   

16.
Abstract The Siluro-Devonian Waits River Formation of north-east Vermont was deformed, intruded by plutons and regionally metamorphosed during the Devonian Acadian Orogeny. Five metamorphic zones were mapped based on the mineralogy of carbonate rocks. From low to high grade, these are: (1) ankerite-albite, (2) ankerite-oligoclase, (3) biotite, (4) amphibole and (5) diopside zones. Pressure was near 4.5kbar and temperature varied from c. 450° C in the ankerite-albite zone to c. 525° C in the diopside zone. Fluid composition for all metamorphic zones was estimated from mineral equilibria. Average calculated χco2[= CO2/(CO2+ H2O)] of fluid in equilibrium with the marls increases with increasing grade from 0.05 in the ankerite-oligoclase zone, to 0.25 in the biotite zone and to 0.44 in the amphibole zone. In the diopside zone, χCO2 decreases to 0.06. Model prograde metamorphic reactions were derived from measured modes, mineral chemistry, and whole-rock chemistry. Prograde reactions involved decarbonation with an evolved volatile mixture of χCO2 > 0.50. The χCO2 of fluid in equilibrium with rocks from all zones, however, was generally <0.40. This difference attests to the infiltration of a reactive H2O-rich fluid during metamorphism. Metamorphosed carbonate rocks from the formation suggests that both heat flow and pervasive infiltration of a reactive H2O-rich fluid drove mineral reactions during metamorphism. Average time-integrated volume fluxes (cm3 fluid/cm2 rock), calculated from the standard equation for coupled fluid flow and reaction in porous media, are (1) ankerite-oligoclase zone: c. 1 × 104; (2) biotite zone: c. 3 × 104; (3) amphibole zone: c. 10 × 104; and diopside zone: c. 60 × 104. The increase in calculated flux with increasing grade is at least in part the result of internal production of volatiles from prograde reactions in pelitic schists and metacarbonate rocks within the Waits River Formation. The mapped pattern of time-integrated fluxes indicates that the Strafford-Willoughby Arch and the numerous igneous intrusions in the field area focused fluid flow during metamorphism. Many rock specimens in the diopside zone experienced extreme alkali depletion and also record low χCO2. Metamorphic fluids in equilibrium with diopside zone rocks may therefore represent a mixture of acid, H2O-rich fluids given off by the crystallizing magmas, and CO2-H2O fluids produced by devolatilization reactions in the host marls. Higher fluxes and different fluid compositions recorded near the plutons suggest that pluton-driven hydrothermal cells were local highs in the larger regional metamorphic hydrothermal system.  相似文献   

17.
The Kesrouane Formation, which is characterized by pervasive dolomitization, has a stratigraphic thickness that exceeds 1000 m. It is part of a broad carbonate platform deposited in the Levant region and represents 60% of the Lebanese Jurassic rocks. Two genetically distinct dolostones are recognized within this unit: (1) fine‐to‐medium crystalline non‐planar grey dolostone; and (2) coarse‐crystalline planar beige dolostone. The former is stratabound and of Early Jurassic age (87Sr/86Sr = 0·707455). This dolostone locally exhi‐bits pseudomorphs of evaporite nodules, pointing towards seepage‐reflux dolomitization by hypersaline‐ to marine‐related fluids. Exposures of the coarse‐crystalline dolostone are associated with regional pre‐Cretaceous faults, along which Late Jurassic volcanics also occur. Sedimentological and diagenetic considerations coupled with microthermometry support a hydrothermal origin for this dolostone, with TH values of primary inclusions between 50 and 80 °C. The related dolomitizing fluids are mesosaline (3·5–12·0 eq. wt% NaCl), and are believed to result from the mixing of evaporative brines and sea water. Dolomitization is thus believed to have occurred in two stages, whereby fluids invaded the host rocks first by seepage‐reflux, explaining the resulting Early Jurassic stratabound dolostone, and later through fracture flow along the faults associated with the Late Jurassic volcanism, explaining the coarse‐crystalline hydrothemal dolostone.  相似文献   

18.
Based on isotopic and geochemical data for Late Riphean dikes and sills and for Devonian dolerite dikes and basalt covers within the Sette-Daban rift in the western part of the Siberian platform, we proved conceptions about the participation of various deep sources in their formation. The inverse correlation in Devonian basites between concentrations of Nb, light rare earth elements, and a number of other highly incompatible elements on the one hand and Zr, Y, and other moderate incompatible elements, including heavy rare earth elements on the other hand allows us to assume that two sources participated in the formation of melts. The source of dolerites is close to the EMORB type, and the source of basalts is close to the OIB type. The compositions of Riphean rocks correspond to a trend for which magma formation occurred with the participation of a source with characteristics between NMORB and EMORB and also a component typical of subduction zones. The data obtained imply associate formation of basites with the influence of mantle plumes on the lithosphere of the southeastern part of the Siberian craton in the Late Riphean and Middle Paleozoic. In the Riphean the plume mantle was composed of a moderately depleted mantle of the EMODB type and a mantle with the composition close to the above-subduction mantle, which was metosomatically changed under the influence of fluid water, which caused the appearance of a Nb and Ta deficit in melting products. The isotopic characteristics Nd(147Sm/144Nd = 0.165 and ɛNd(T) ∼ 2.3–4.7) of rocks show the moderate depleted nature of these sources.  相似文献   

19.
小加山钨矿区位于东准噶尔成矿区中部南缘,处于博格达-哈尔里克构造带上。构造位置上矿区处于哈尔里克复式背斜中,构造线方向以EW向为主。矿区出露地层主要为中泥盆统大南湖组第一亚组第一段(D_2d_1~1)、和第二段(D_2d_1~2)。主要岩浆岩有石英闪长岩、黑云母二长花岗岩、钾长花岗岩及少量中酸性花岗闪长岩脉。矿体赋存于邻近海西晚期花岗岩侵入体附近的中泥盆统大南湖组第一亚组第二段(D_2d_1~2)的变质晶屑凝灰岩中。矿石类型为石英脉型黑钨矿石,有用金属主要为黑钨矿,黑钨矿石英脉分为灰色含钨石英脉和白色含钨石英脉2种。四极质谱分析法测得矿床流体包裹体气相成分以H_2O、CO_2为主,次为N_2、CH_4,此外还含有少量的Ar、C_2H_6,液相成分以Cl~-、Na~+为主,次为Ca~(2+),表明成矿流体主要为H_2O-CO_2-NaCl体系。矿床成因类型属于高温热液石英脉型黑钨矿床,矿体主要位于围岩裂隙构造。钨主要由侵入围岩地层中的地幔热液迁移富集而来,W元素迁移过程中,含钨络合物成矿流体分解进而沉淀成矿。  相似文献   

20.
Stratabound epigenetic dolomite occurs in carbonate facies of the Barrandian basin (Silurian and Devonian), Czech Republic. The most intense dolomitization is developed in bioclastic calcarenites within the transition between micritic limestone and shaledominated Přídolí and Lochkov formations deposited on a carbonate slope. Medium-crystalline (100–400 μm), inclusion-rich, xenotopic matrix dolomite (δ 18O=−4.64 to −3.40‰ PDB;δ 13C=+1.05 to +1.85‰ PDB) which selectively replaced most of the bioclastic precursor is volumetrically the most important dolomite type. Coarse crystalline saddle dolomite (δ 18O=−8.04 to −5.14‰ PDB;δ 18C=+0.49 to +1.49 PDB) which precipitated in fractures and vugs within the matrix dolomite represents a later diagenetic dolomitization event. In some vugs, saddle dolomite coprecipitated with petroleum inclusion-rich authigenic quartz crystals and minor sulfides which, in turn, were post-dated by semisolid asphaltic bitumen. The interpretation of the dolomitization remains equivocal. Massive xenotopic dolomite, although generally characteristic of a deeper burial setting, may have been formed by a recrystallization of an earlier, possibly shallow burial dolomite. Deeper burial recrystallization by reactive basinal pore fluids that presumably migrated through the more permeable upper portion of the Přídolí sequence appears as a viable explanation for this dolomitization overprint. Saddle dolomite cement of the matrix dolomite is interpreted as the last dolomitization event that occurred during deep burial at the depth of the oil window zone. The presence of saddle dolomite, the fluid inclusion composition of associated quartz crystals, and vitrinite paleogeothermometry of adjacent sediments imply diagenetic burial temperatures as high as 160°C. Although high geothermal gradients in the past or the involvement of hydrothermally influenced basinal fluids can account for these elevated temperatures, burial heating beneath approximately 3-km-thick sedimentary overburden of presumably post-Givetian strata, no longer preserved in the basin, appears to be the most likely interpretation. This interpretaion may imply that the magnitude of post-Variscan erosion in the Barrandian area was substantially greater than previously thought.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号