共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
In this paper, the numerical manifold method (NMM) is extended to study wave propagation across rock masses. First, improvements to the system equations, contact treatment, and boundary conditions of the NMM are performed, where new system equations are derived based on the Newmark assumption of the space–time relationship, the edge‐to‐edge contact treatment is further developed for the NMM to handle stress wave propagation across discontinuities, and the viscous non‐reflection boundary condition is derived based on the energy minimisation principle. After the modification, numerical comparisons between the original and improved NMM are presented. The results show that the original system equations result in artificial numerical damping, which can be overcome by the Newmark system equations. Meanwhile, the original contact scheme suffers some calculation problems when modelling stress wave propagation across a discontinuity, which can be solved by the proposed edge‐to‐edge contact scheme. Subsequently, the influence of the mesh size and time step on the improved NMM for stress wave propagation is studied. Finally, 2D wave propagation is modelled, and the model's results are in good agreement with the analytical solution. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
3.
A major challenge in seepage analysis is to locate the phreatic surface in an unconfined aquifer. The phreatic surface is unknown and assumed as a discontinuity separating the seepage domain into dry and wet parts, thus should be determined iteratively with special schemes. In this study, we systematically developed a new numerical manifold method (NMM) model for unconfined seepage analysis. The NMM is a general numerical method for modeling continuous and discontinuous deformation in a unified mathematical form. The novelty of our NMM model is rooted in the NMM two‐cover‐mesh system: the mathematical covers are fixed and the physical covers are adjusted with iterations to account for the discontinuity feature of the phreatic surface. We developed an energy‐work seepage model, which accommodates flexible approaches for boundary conditions and provides a form consistent with that in mechanical analysis with clarified physical meaning of the potential energy. In the framework of this energy‐work seepage model, we proposed a physical concept model (a pipe model) for constructing the penalty function used in the penalty method to uniformly deal with Dirichlet, Neumann, and material boundaries. The new NMM model was applied to study four example problems of unconfined seepage with varying geometric shape, boundary conditions, and material domains. The comparison of our simulation results to those of existing numerical models for these examples indicates that our NMM model can achieve a high accuracy and faster convergence speed with relatively coarse meshes. This NMM seepage model will be a key component of our future coupled hydro‐mechanical NMM model. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
4.
Boundary settings for the seismic dynamic response analysis of rock masses using the numerical manifold method 
下载免费PDF全文
下载免费PDF全文 Aiming to accurately simulate seismic dynamic response of rock masses using the numerical manifold method (NMM), boundary settings must be treated carefully. In this paper, 4 issues in boundary settings are investigated to improve the performance of NMM: (1) Nonreflecting boundaries including the viscous boundary and viscoelastic boundary are considered; (2) A free‐field boundary is incorporated into NMM to accurately simulate external source wave motion; (3) A seismic input boundary is considered, and the force input method is introduced; and (4) A static‐dynamic unified boundary is incorporated for the convenience of transforming displacement boundary into other types of boundaries, such as nonreflecting boundaries and seismic input boundary. Several benchmark problems are solved to validate the improved NMM. Simulation results agree well with analytical ones, indicating that the improved NMM is able to simulate seismic dynamic response of rock masses reliably and correctly. 相似文献
5.
6.
It is well known that the Babuska–Brezzi stability criterion or the Zienkiewicz–Taylor patch test precludes the use of the finite elements with the same low order of interpolation for displacement and pore pressure in the nearly incompressible and undrained cases, unless some stabilization techniques are introduced for dynamic analysis of saturated porous medium where coupling occurs between the displacement of solid skeleton and pore pressure. The numerical manifold method (NMM), where the interpolation of displacement and pressure can be determined independently in an element for the solution of u–p formulation, is derived based on triangular mesh for the requirement of high accurate calculations from practical applications in the dynamic analysis of saturated porous materials. The matrices of equilibrium equations for the second‐order displacement and the first‐order pressure manifold method are given in detail for program coding. By close comparison with widely used finite element method, the NMM presents good stability for the coupling problems, particularly in the nearly incompressible and undrained cases. Numerical examples are given to illustrate the validity and stability of the manifold element developed. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
7.
传统数值流形法（NMM）在处理非连续变形问题时,仅限于几何构型不发生破坏的情况。针对这一不足,通过在裂纹尖端附近的物理片上增加用于模拟应力奇异性的增强位移函数,进一步发展了可用于几何构型破坏的扩展的高阶NMM。然后,将其应用到重力坝由连续到非连续的破坏过程分析中。首先,针对一含单裂纹的重力坝模型进行了敏感性分析,结果表明,在不同的扩展长度或网格密度下,其扩展路径基本相同且与文献结果保持一致。进而在此模型基础上又开展了多裂纹扩展分析,结果仅一条主导裂纹发生扩展,与文献结果基本一致。最后,针对印度的Koyna重力坝,通过设置不同的漫顶高度研究了其裂纹扩展路径的变化。结果表明,随着漫顶高度的增大,裂纹扩展路径逐渐趋向于水平方向扩展,而且坝体抵抗破坏的能力逐渐减弱。总体表明,NMM在求解实际工程问题时具有很好的数值稳定性和鲁棒性。 相似文献
8.
基于数值流形法（NMM）进行三维裂纹扩展分析研究,编写了相应的C++程序。充分发挥数值流形法在非连续变形分析领域的优势,不需要扩展有限元中的水平集和阶跃函数概念,应用数值流形法计算结果分析裂纹尖端线的破坏状况,对已有的非局部求迹法和三角形推进法进行简化和扩展,提出一种简化算法确定最终的新裂纹扩展面。应用简化算法对水平钱币型裂纹扩展问题进行数值模拟和对比分析研究。计算结果表明,基于数值流形法的三维裂纹扩展算法是可行的,采用简化处理之后,克服原有算法的不足,大大减少了新裂纹尖端线和新裂纹面的数目,降低了计算网格对新裂纹面的影响,提高了计算效率和扩大了应用范围。 相似文献
9.
10.
运用三维数值流形法（3D NMM）进行三维裂纹扩展分析,并采用C++语言编写了相应的程序。充分利用三维数值流形法模拟裂纹扩展的优势,只需要更新裂纹尖端线附近的边界环路和流形单元,不需要使用阶跃函数。根据三维数值流形法计算得到的应力结果,应用非局部求迹方法分析每个裂纹尖端的破坏状态,如果发生破坏则沿垂直于其最大主应力方向扩展。针对裂纹扩展后的不同状况,采用四边形或三角形推进法。裂纹扩展后为了使变形后的面保持平面,必须对新生成的面进行三角化分割。对诸如单边裂纹、平行钱币型裂纹和倾斜钱币型裂纹扩展问题进行数值模拟。计算结果表明,采用三维数值流形法进行裂纹扩展模拟是可行的,文中方法对裂纹尖端线非闭合和闭合的情形均适用,且文中方法对于裂纹尖端线位于单元内部的非平面裂纹扩展也是有效的。 相似文献
11.
介绍了在非饱和土、数值分析、测试技术和土工合成材料工程应用方面的成就。关于非饱和土方面,指出了加强非饱和土基本试验研究工作的紧迫性;关于数值分析方面,认为流形元法为连续和非连续变形的力学分析提供了一个统一的方法,应加强在岩体力学和土力学中的开发与应用;关于岩土力学的测试技术,需密切注意近年高新技术在岩土领域的引进和推广;对于土工合成材料,应加强机制的研究,注意在应用中掌握有关原理,最后对岩土工程研究中当前存在的问题和今后发展作了简单的评述 相似文献
12.
This paper proposes a numerical model for jointed rock masses within the 3‐D numerical manifold method (NMM) framework equipped with a customized contact algorithm. The strength of rock sample containing a few sets of discontinuities is first investigated. The results of models with simple geometries are compared with the available analytical solutions to verify the developed computer code, whereas models with complex geometries are simulated to better understand the fundamental behavior and failure mechanism of jointed rock mass. Furthermore, the stability of jointed rock mass in an underground excavation is studied, where rock failure process is determined by the 3‐D NMM simulation. The simulation results provide valuable guidance on excavation process design and stabilization design in rock engineering practice. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
13.
数值流形方法（NMM）基于两套覆盖（数学和物理覆盖）和接触环路而建立,能够统一地处理岩土工程中的连续和非连续变形分析问题。与其他基于单位分解理论的数值方法一样,NMM可以自由地提高物理片上局部位移函数（多项式）的阶次,从而在不加密网格的情况下显著地提高计算精度,但有可能会使总体刚度矩阵奇异,产生线性相关问题。针对这种情况,引入了一种新的高次多项式形式的局部位移函数,在此基础上,建立了新的NMM求解体系,并应用于求解一般的弹性力学问题。结果表明：它有效地消除了线性相关问题;较之传统局部位移函数取一次多项式的NMM,达到了更高的精度;节点应力是连续的;定义在物理片上的所有自由度都具有明确的物理含义,其中第3～5个刚好是物理片所对应插值点处的应变分量,因此,直接获得此处的应力状态。该方法可以很容易地推广到其他基于单位分解的数值方法中。 相似文献
14.
《Geomechanics and Geoengineering》2013,8(2):147-153
With high-order numerical manifold method (NMM) or high-order discontinuous deformation analysis method (DDA), computational accuracy of structure deformation can be improved greatly. However, poor accuracy is obtained and even computation is not convergent while treating large deformation problems, due to inaccurate or incorrect high-order initial stress formulae. Based on 2D triangular mathematical meshes and polynomial cover functions in high-order NMM, exact formulae for high-order initial stresses are deduced to depict configuration change of structures under large deformations. The formulae are expressed in polynomial forms so as to be used in simplex integrations. The approach is also extended to high-order DDA. Comparing with analytical solutions, accurate results for large deformation of a cantilever beam prove the validity of the proposed formulae. 相似文献
15.
在岩土工程分析中求解精度控制常常是必需的,在数值流形法中可以通过控制数学覆盖网格的稀疏和覆盖位移的阶数来达到精度的要求。提出了基于等几何分析的数值流形方法,定义了相应的数学覆盖的构造形式,推导了基于二次B样条的9节点数值流形方法分析格式;针对基于Lagrange插值函数的4节点数值流形方法提出了基于T样条思想的数学覆盖网格的局部加密方法。算例计算结果表明,相对于4节点的数值流形方法,基于非均匀有理B样条的9节点数值流形方法具有更高的精度;基于T样条思想的加密网格在保持计算精度的前提下降低了自由度的数量,表明T样条加密是一种自然的局部加密算法。 相似文献
16.
数值流形方法（NMM）的最大优势在于可以统一地处理岩土力学中的连续和非连续变形问题。它在求解断裂力学问题时无需强制裂纹与数学网格保持一致,非常适合应用于岩土工程中由连续到非连续的破坏过程模拟。在裂纹扩展过程中,裂纹与数学网格的相对位置将会是任意的,如裂纹尖端可能落在网格内部、网格节点上或网格边上等。因此,对同一条裂纹,通过旋转和移动数学网格构造了它们之间的这种相对位置关系以及一些可能对计算结果产生影响的极端情况,并以应力强度因子作为衡量标准,研究了NMM在处理线弹性断裂力学问题时的网格依赖性。研究表明,NMM即使在处理强奇异性问题时依然有着很好的网格无关性,进一步证实了它在模拟裂纹扩展问题时的鲁棒性。 相似文献
17.
为了保障岩土工程结构能长期正常使用,需要对其蠕变变形进行分析。“时步-初应变”法是一种常用的计算岩石蠕变的方法。数值流形方法是一种新兴的数值计算方法,常用于计算节理岩体的变形,但尚未被试用于计算蠕变变形。在原数值流形方法的程序中增加了基于“时步-初应变”法的计算模块,通过对广义开尔文模型进行的模拟,显示新程序可以正确反映岩石的黏弹性蠕变趋势,并能够计算包含节理的岩体的蠕变变形,改进后的数值流形方法不但能够模拟岩石的线弹性变形,而且可以模拟岩石的黏弹性蠕变,比原流形方法更能全面地模拟岩石的变形,扩展了数值流形方法在岩土工程中的使用范围。 相似文献
18.
三维流形单元的生成是进行三维数值流形分析的首要问题之一。详细研究了三维流形单元的生成过程,并采用C++语言编写了相应的程序。借鉴二维流形单元的形成技术,基于拓扑学的“有向性”原理,将点、有向边、有向环、有向面和有向壳等作为三维块体的基本数据结构。将材料体和数学网格进行布尔交运算,并对形成的流形块体进行有效性检测,满足要求后即形成新的三维流形单元。每个数学网格的顶点作为新流形单元的数学覆盖,再对数学覆盖进行细分,形成流形单元的物理覆盖。分别选取凹形体、空心体和包含有限结构面的材料体与数学网格进行布尔交运算,并选取一个典型工程来检查该方法和程序的可行性。计算结果表明,该方法可以对复杂块体（凹形体、空心体和包含有限结构面的体）进行处理,为今后进行复杂结构计算和分析奠定基础,具有较强的适应性和可靠性。 相似文献
19.
The coupled numerical manifold method (NMM) and discontinuous deformation analysis (DDA) are enhanced to simulate deformations of continuous soil and discontinuous masonry structures. An elasto-plastic NMM-DDA is formulated that incorporates elasto-plastic constitutive laws into incremental forms of the equation of motion. A node-based uniform strain element is applied to avoid volumetric locking, which often occurs in conventional NMM-DDA. The proposed method is applied to three fundamental boundary value problems: a beam bending problem, a bearing capacity problem of a footing, and a bearing capacity problem of a masonry structure. The method is verified through comparisons with conventional solutions. 相似文献