首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 234 毫秒
1.
The Hammamat molasse sediments of the Eastern Desert of Egypt were deposited in isolated basins formed during an initial stage of orogen parallel N–S extension (650–580 Ma) in the Neoproterozoic time. Supply of sediments to the molasse basins began after the eruption of Dokhan volcanics (602–593 Ma), exhumation of core complexes (650–550 Ma), and intrusion of late tectonic granites (610–550 Ma). The late Neoproterozoic structures in the molasse sediments include: (1) NNW-directed thrusts due to NNW–SSE shortening (650–640 Ma), indicated by the presence of NE-, ENE-, and WSW-trending folds and NNW-directed thrusts. (2) SW- and NE-directed thrusts due to ENE–WSW constriction during oblique convergence and arc accretion at around 640–620 Ma. Many of the map- and mesoscopic-scale NW-trending folds in the core complexes, the molasse sediments, and the Neoproterozoic nappes in the Eastern Desert are related to this event. Sinistral shearing along the Najd Fault System (650–540 Ma) resulted in the development of subvertical foliation, subhorizontal stretching lineation, and NW-trending tight folds overprinting earlier folds. Stretched pebbles are oriented NW–SE and WNW–ESE in the molasse basins localized within the Najd Fault System, and NE–SW in the basins outside the influence zone of this NW-trending fault system. Strain estimated using pebbles from nine molasse basins indicate that the amount of strain differs from one basin to another and from one place to another within the same basin. Weak tectonic strain (Rs = 2.16–2.24) is obtained from post-orogenic basins; moderate strains are reported from foreland basins (Rs = 2.37–3.18), whereas moderate to high tectonic strains are recorded from the intermontane basins (Rs = 2.40–4.36). The obtained tectonic strain and K values indicate that the flattening strain prevails in the post-orogenic and foreland basins, whereas as both constrictional and flattening strains are recorded in intermontane basins. Strain variation from one basin to another and within the individual basin is attributed to presence of thrust and sinistral shear zones. Away from the deformed zones, the pebbles show no significant stretching. Two phases of thrusting and an episode of transpressional sinistral shearing are the latest structure features of the East African orogeny in the Arabian–Nubian Shield.  相似文献   

2.
The excess vibrational entropy (ΔS vibex) of several silicate solid solutions are found to be linearly correlated with the differences in end-member volumes (ΔV i ) and end-member bulk moduli (Δκ i ). If a substitution produces both, larger and elastically stiffer polyhedra, then the substituted ion will find itself in a strong enlarged structure. The frequency of its vibration is decreased because of the increase in bond lengths. Lowering of frequencies produces larger heat capacities, which give rise to positive excess vibrational entropies. If a substitution produces larger but elastically softer polyhedra, then increase and decrease of mean bond lengths may be similar in magnitude and their effect on the vibrational entropy tends to be compensated. The empirical relationship between ΔS vibex, ΔV i and Δκ i , as described by ΔS vibex = (ΔV i  + mΔκ i )f, was calibrated on six silicate solid solutions (analbite–sanidine, pyrope–grossular, forsterite–fayalite, analbite–anorthite, anorthite–sanidine, CaTs–diopside) yielding m = 0.0246 and f = 2.926. It allows the prediction of ΔS vibex behaviour of a solid solution based on its volume and bulk moduli end-member data.  相似文献   

3.
The development of Hot-Dry Rock (HDR) geothermal energy in Australia with drillings to some kilometres depth yields an impetus for deep stress logging. For the Olympic Dam HDR-project, borehole Blanche-1 was drilled to almost 2 km depth and provided the possibility to estimate the in situ stresses within the granitic borehole section by the analysis of borehole breakouts and core discing, as well as by hydraulic fracturing combined with acoustic borehole televiewer logging for fracture orientation determination. Although the stress magnitudes derived by the different methods deviate significantly, they clearly indicate for the depth range between 800 and 1,740 m a compressional stress regime of S v ≤ S h < S H and a consistent East–West orientation of maximum horizontal compression in agreement with existing stress data for Australia. The minor horizontal stress S h derived from the hydraulic fracturing closure pressure values is about equal to the overburden stress and may be regarded as most reliable.  相似文献   

4.
The H2O content of wadsleyite were measured in a wide pressure (13–20 GPa) and temperature range (1,200–1,900°C) using FTIR method. We confirmed significant decrease of the H2O content of wadsleyite with increasing temperature and reported first systematic data for temperature interval of 1,400–1,900°C. Wadsleyite contains 0.37–0.55 wt% H2O at 1,600°C, which may be close to its water storage capacity along average mantle geotherm in the transition zone. Accordingly, water storage capacity of the average mantle in the transition zone may be estimated as 0.2–0.3 wt% H2O. The H2O contents of wadsleyite at 1,800–1,900°C are 0.22–0.39 wt%, indicating that it can store significant amount of water even under the hot mantle environments. Temperature dependence of the H2O content of wadsleyite can be described by exponential equation C\textH2 \textO = 6 3 7.0 7 \texte - 0.00 4 8T , C_{{{\text{H}}_{2} {\text{O}}}} = 6 3 7.0 7 {\text{e}}^{ - 0.00 4 8T} , where T is in °C. This equation is valid for temperature range 1,200–2,100°C with the coefficient of determination R 2 = 0.954. Temperature dependence of H2O partition coefficient between wadsleyite and forsterite (D wd/fo) is complex. According to our data apparent Dwd/fo decreases with increasing temperature from D wd/fo = 4–5 at 1,200°C, reaches a minimum of D wd/fo = 2.0 at 1,400–1,500°C, and then again increases to D wd/fo = 4–6 at 1,700–1,900°C.  相似文献   

5.
Single-crystal electron paramagnetic resonance (EPR) spectra of a gem-quality jeremejevite, Al6B5O15(F, OH)3, from Cape Cross, Namibia, reveal an S = 1/2 hole center characterized by an 27Al hyperfine structure arising from interaction with two equivalent Al nuclei. Spin-Hamiltonian parameters obtained from single-crystal EPR spectra at 295 K are as follows: g 1 = 2.02899(1), g 2 = 2.02011(2), g 3 = 2.00595(1); A 1/g e β e  = −0.881(1) mT, A 2/g e β e  = −0.951(1) mT, and A 3/g e β e  = −0.972(2) mT, with the orientations of the g 3- and A 3-axes almost coaxial and perpendicular to the Al–O–Al plane; and those of the g 1- and A 1-axes approximately along the Al–Al and Al–OH directions, respectively. These results suggest that this aluminum-associated hole center represents hole trapping on a hydroxyl oxygen atom linked to two equivalent octahedral Al3+ ions, after the removal of the proton (i.e., a VIAl–O−–VIAl center). Periodic ab initio UHF and DFT calculations confirmed the experimental 27Al hyperfine coupling constants and directions, supporting the proposed structural model. The VIAl–O−–VIAl center in jeremejevite undergoes the onset of thermal decay at 300 °C and is completely bleached at 525 °C. These data obtained from the VIAl–O−–VIAl center in jeremejevite provide new insights into analogous centers that have been documented in several other minerals.  相似文献   

6.
The major and trace-element geochemistry, Sr–Nd bulk-rock isotopes, U–Pb zircon chronology and Lu–Hf isotopic compositions are described for three granitic bodies which intrude the Nyingchi gneisses (Lhasa terrane) along the western margin of the eastern Himalayan syntaxis. The Bayi two-mica granite and Lunan granite–granodiorite were intruded at 22 ± 1 and 25.4 ± 0.3 Ma, respectively, whereas the Confluence biotite granite was emplaced at 49.1 ± 0.4 Ma. All share strong depletions in Y and HREE requiring a garnet-bearing source both during and following the Eocene collision of the Indian plate with the Lhasa terrane. The isotope geochemistry of these intrusives (ε Nd(t) = −3 to −5, 87Sr/86Sr(t) = 0.706–0.707) indicates a crustal source within the Lhasa terrane. Sr–Nd systematics of the garnet-bearing Nyingchi gneisses together with the U–Pb and Lu–Hf isotopic ratios of detrital zircons recovered from this unit identifies it as a potential melt source. The combined element and isotope geochemistry of the plutons indicate a mixed source; the gneisses provide the older component whereas the Gangdese batholith provides a younger, siliceous component. The involvement of garnet-bearing crustal material in melt sources from the Cretaceous (80 Ma) to the Miocene (20 Ma) is consistent with the presence of a thicker continental crust in the eastern Lhasa terrane, as is the presence of magmatic epidote in several plutons which indicates a regional deepening level of exposure eastwards. Post-collision crustal melting is synchronous with proposed slab break-off during the early Miocene, suggesting advective heating by rising asthenospheric melts.  相似文献   

7.
Mg-Al-rich rocks from the Palghat-Cauvery Shear Zone System (PCSZ) within the Gondwana suture zone in southern India contain sodicgedrite as one of the prograde to peak phases, stable during T = 900–990°C ultrahigh-temperature metamorphism. Gedrite in these samples is Mg-rich (Mg/[Fe + Mg] = X Mg = 0.69–0.80) and shows wide variation in Na2O content (1.4–2.3 wt.%, NaA = 0.33–0.61 pfu). Gedrite adjacent to kyanite pseudomorph is in part mantled by garnet and cordierite. The gedrite proximal to garnet shows an increase in NaA and AlIV from the core (NaA = 0.40–0.51 pfu, AlIV = 1.6–1.9 pfu) to the rim (NaA = 0.49–0.61 pfu, AlIV = 2.0–2.2 pfu), suggesting the progress of the following dehydration reaction: Ged + Ky → Na-Ged + Grt + Crd + H2O. This reaction suggests that, as the reactants broke down during the prograde stage, the remaining gedrite became enriched in Na to form sodicgedrite, which is regarded as a unique feature of high-grade rocks with Mg-Al-rich and K–Si-poor bulk chemistry. We carried out high-P-T experimental studies on natural sodicgedrite and the results indicate that gedrite and melt are stable phases at 12 kbar and 1,000°C. However, the product gedrite is Na-poor with only <0.13 wt.% Na2O (NaA = 0.015–0.034 pfu). In contrast, the matrix glass contains up to 8.5 wt.% Na2O, suggesting that, with the progressive melting of the starting material, Na was partitioned into the melt rather than gedrite. The results therefore imply that the occurrence of sodicgedrite in the UHT rocks of the PCSZ is probably due to the low H2O activity during peak P-T conditions that restricted extensive partial melting in these rocks, leaving Na partitioned into the solid phase (gedrite). The occurrence of abundant primary CO2-rich fluid inclusions in this rock, which possibly infiltrated along the collisional suture during the final amalgamation of the Gondwana supercontinent, strengthens the inference of low water activity.  相似文献   

8.
The magnitude of the in situ stresses in the Cooper–Eromanga Basins have been determined using an extensive petroleum exploration database from over 40 years of drilling. The magnitude of the vertical stress (Sv) was calculated based on density and velocity checkshot data in 24 wells. Upper and lower bound values of the vertical stress magnitude are approximated by Sv = (14.39 × Z)1.12 and Sv = (11.67 × Z)1.15 functions respectively (where Z is depth in km and Sv is in MPa). Leak-off test data from the two basins constrain the lower bound estimate for the minimum horizontal stress (Shmin) magnitude to 15.5 MPa/km. Closure pressures from a large number of minifrac tests indicate considerable scatter in the minimum horizontal stress magnitude, with values approaching the magnitude of the vertical stress in some areas. The magnitude of the maximum horizontal stress (SHmax) was constrained by the frictional limits to stress beyond which faulting occurs and by the presence of drilling-induced tensile fractures in some wells. The maximum horizontal stress magnitude can only be loosely constrained regionally using frictional limits, due to the variability of both the minimum horizontal stress and vertical stress estimates. However, the maximum horizontal stress and thus the full stress tensor can be better constrained at individual well locations, as demonstrated in Bulyeroo-1 and Dullingari North-8, where the necessary data (i.e. image logs, minifrac tests and density logs) are available. The stress magnitudes determined indicate a predominantly strike-slip fault stress regime (SHmax > Sv > Shmin) at a depth of between 1 and 3 km in the Cooper–Eromanga Basins. However, some areas of the basin are transitional between strike-slip and reverse fault stress regimes (SHmax > Sv ≈ Shmin). Large differential stresses in the Cooper–Eromanga Basins indicate a high upper crustal strength for the region, consistent with other intraplate regions. We propose that the in situ stress field in the Cooper–Eromanga Basins is a direct result of the complex interaction of tectonic stresses from the convergent plate boundaries surrounding the Indo-Australian plate that are transmitted into the center of the plate through a high-strength upper crust.  相似文献   

9.
The processes of orocline formation are a topic of debate in geosciences. The Patagonian orocline has been a case in point for over a century. Large anomalous paleomagnetic pole rotations show that the orocline started to form at the same time as mid-Cretaceous closure of the Rocas Verdes Basin, today known from ophiolitic and basin fill remnants in the Patagonian and Fuegian Andes. Some studies therefore present bending of the Andes and closure of the basin as shared consequences of rotation of a small plate that was driven by subduction-related forces at the Pacific margin of Gondwana. An alternative view of the orocline is as a product of Cretaceous to Paleogene-aged sinistral oblique convergence at the plate-boundary scale. Geological data from Tierra del Fuego have been interpreted in support of both views. Here, I test these suggestions by comparing the Rocas Verdes Basin's tectonostratigraphy to predictions of a plate kinematic model for fragmentation of the western interior of Gondwana. The model is sufficient to explain the known history of basin opening to a width of ~ 100–300 km during the period 152–141 Ma and later closure in oblique plate convergence. As this convergence occurred by motion around a distant Euler pole, it could not have produced the Patagonian orocline by rotation of a lithospheric plate on its Pacific flank. The large anomalous paleomagnetic rotations of Tierra del Fuego, instead, are likely to have occurred within the crust by rotation and deformation of regional strike-slip faults and the intervening rocks to accommodate oblique convergence of the South American and Antarctic plates between Albian and Paleocene times.  相似文献   

10.
The Mississippi Valley-type (MVT) Pb–Zn ore district at Mežica is hosted by Middle to Upper Triassic platform carbonate rocks in the Northern Karavanke/Drau Range geotectonic units of the Eastern Alps, northeastern Slovenia. The mineralization at Mežica covers an area of 64 km2 with more than 350 orebodies and numerous galena and sphalerite occurrences, which formed epigenetically, both conformable and discordant to bedding. While knowledge on the style of mineralization has grown considerably, the origin of discordant mineralization is still debated. Sulfur stable isotope analyses of 149 sulfide samples from the different types of orebodies provide new insights on the genesis of these mineralizations and their relationship. Over the whole mining district, sphalerite and galena have δ 34 S values in the range of –24.7 to –1.5‰ VCDT (–13.5 ± 5.0‰) and –24.7 to –1.4‰ (–10.7 ± 5.9‰), respectively. These values are in the range of the main MVT deposits of the Drau Range. All sulfide δ 34 S values are negative within a broad range, with δ 34 S pyrite <δ 34 S sphalerite <δ 34 S galena for both conformable and discordant orebodies, indicating isotopically heterogeneous H2S in the ore-forming fluids and precipitation of the sulfides at thermodynamic disequilibrium. This clearly supports that the main sulfide sulfur originates from bacterially mediated reduction (BSR) of Middle to Upper Triassic seawater sulfate or evaporite sulfate. Thermochemical sulfate reduction (TSR) by organic compounds contributed a minor amount of 34S-enriched H2S to the ore fluid. The variations of δ 34 S values of galena and coarse-grained sphalerite at orefield scale are generally larger than the differences observed in single hand specimens. The progressively more negative δ 34 S values with time along the different sphalerite generations are consistent with mixing of different H2S sources, with a decreasing contribution of H2S from regional TSR, and an increase from a local H2S reservoir produced by BSR (i.e., sedimentary biogenic pyrite, organo-sulfur compounds). Galena in discordant ore (–11.9 to –1.7‰; –7.0 ± 2.7‰, n = 12) tends to be depleted in 34 S compared with conformable ore (–24.7 to –2.8‰, –11.7 ± 6.2‰, n = 39). A similar trend is observed from fine-crystalline sphalerite I to coarse open-space filling sphalerite II. Some variation of the sulfide δ 34 S values is attributed to the inherent variability of bacterial sulfate reduction, including metabolic recycling in a locally partially closed system and contribution of H2S from hydrolysis of biogenic pyrite and thermal cracking of organo-sulfur compounds. The results suggest that the conformable orebodies originated by mixing of hydrothermal saline metal-rich fluid with H2S-rich pore waters during late burial diagenesis, while the discordant orebodies formed by mobilization of the earlier conformable mineralization.  相似文献   

11.
The Samgwang mine is located in the Cheongyang gold district (Cheonan Metallogenic Province) of the Republic of Korea. It consists of eight massive, gold-bearing quartz veins that filled NE- and NW-striking fractures along fault zones in Precambrian granitic gneiss of the Gyeonggi massif. Their mineralogy and paragenesis allow two separate vein-forming episodes to be recognized, temporally separated by a major faulting event. The ore minerals occur in quartz and calcite of stage I, associated with fracturing and healing of veins. Hydrothermal wall-rock alteration minerals of stage I include Fe-rich chlorite (Fe/(Fe+Mg) ratios 0.74-0.81), muscovite, illite, K-feldspar, and minor arsenopyrite, pyrite, and carbonates. Sulfide minerals deposited along with electrum during this stage include arsenopyrite, pyrite, pyrrhotite, sphalerite, marcasite, chalcopyrite, galena, argentite, pyrargyrite, and argentian tetrahedrite. Only calcite was deposited during stage II. Fluid inclusions in quartz contain three main types of C–O–H fluids: CO2-rich, CO2–H2O, and aqueous inclusions. Quartz veins related to early sulfides in stage I were deposited from H2O–NaCl–CO2 fluids (1,500–5,000 bar, average 3,200) with T htotal values of 200°C to 383°C and salinities less than about 7 wt.% NaCl equiv. Late sulfide deposition was related to H2O–NaCl fluids (140–1,300 bar, average 700) with T htotal values of 110°C to 385°C and salinities less than about 11 wt.% NaCl equiv. These fluids either evolved through immiscibility of H2O–NaCl–CO2 fluids as a result of a decrease in fluid pressure, or through mixing with deeply circulated meteoric waters as a result of uplift or unloading during mineralization, or both. Measured and calculated sulfur isotope compositions (δ34SH2S = 1.5 to 4.8‰) of hydrothermal fluids from the stage I quartz veins indicate that ore sulfur was derived mainly from a magmatic source. The calculated and measured oxygen and hydrogen isotope compositions (δ18OH2O = −5.9‰ to 10.9‰, δD = −102‰ to −87‰) of the ore-forming fluids indicate that the fluids were derived from magmatic sources and evolved by mixing with local meteoric water by limited water–rock exchange and by partly degassing in uplift zones during mineralization. While most features of the Samgwang mine are consistent with classification as an orogenic gold deposit, isotopic and fluid chemistry indicate that the veins were genetically related to intrusions emplaced during the Jurassic to Cretaceous Daebo orogeny.  相似文献   

12.
Systematic inversion of double couple focal mechanisms of shallow earthquakes in the northern Andes reveals relatively homogeneous patterns of crustal stress in three main regions. The first region, presently under the influence of the Caribbean plate, includes the northern segment of the Eastern Cordillera of Colombia and the western flank of the Central Cordillera (north of 4°N). It is characterized by WNW–ESE compression of dominantly reverse type that deflects to NW–SE in the Merida Andes of Venezuela, where it becomes mainly strike–slip in type. A major bend of the Eastern thrust front of the Eastern Cordillera, near its junction with the Merida Andes, coincides with a local deflection of the stress regime (SW–NE compression), suggesting local accommodation of the thrust belt to a rigid indenter in this area. The second region includes the SW Pacific coast of Colombia and Ecuador, currently under the influence of the Nazca plate. In this area, approximately E–W compression is mainly reverse in type. It deflects to WSW–ENE in the northern Andes south of 4°N, where it is accommodated by right-lateral displacement of the Romeral fault complex and the Eastern front of the northern Andes. The third, and most complex, region is the area of the triple junction between the South American, Nazca and Caribbean plates. It reveals two major stress regimes, both mainly strike–slip in type. The first regime involves SW–NE compression related to the interaction between the Nazca and Caribbean plates and the Panama micro-plate, typically accommodated in an E–W left-lateral shear zone. The second regime involves NW–SE compression, mainly related to the interaction between the Caribbean plate and the North Andes block which induces left-lateral displacement on the Uramita and Romeral faults north of 4°N.Deep seismicity (about 150–170 km) concentrates in the Bucaramanga nest and Cauca Valley areas. The inversion reveals a rather homogeneous attitude of the minimum stress axis, which dips towards the E. This extension is consistent with the present plunge of the Nazca and Caribbean slabs, suggesting that a broken slab may be torn under gravitational stresses in the Bucaramanga nest. This model is compatible with current blocking of the subduction in the western northern Andes, inhibiting the eastward displacement of slabs, which are forced to break and sink in to the asthenosphere under their own weight.  相似文献   

13.
To examine the effect of KCl-bearing fluids on the melting behavior of the Earth’s mantle, we conducted experiments in the Mg2SiO4–MgSiO3–H2O and Mg2SiO4–MgSiO3–KCl–H2O systems at 5 GPa. In the Mg2SiO4–MgSiO3–H2O system, the temperature of the fluid-saturated solidus is bracketed between 1,200–1,250°C, and both forsterite and enstatite coexist with the liquid under supersolidus conditions. In the Mg2SiO4–MgSiO3–KCl–H2O systems with molar Cl/(Cl + H2O) ratios of 0.2, 0.4, and 0.6, the temperatures of the fluid-saturated solidus are bracketed between 1,400–1,450°C, 1,550–1,600°C, and 1,600–1,650°C, respectively, and only forsterite coexists with liquid under supersolidus conditions. This increase in the temperature of the solidus demonstrates the significant effect of KCl on reducing the activity of H2O in the fluid in the Mg2SiO4–MgSiO3–H2O system. The change in the melting residues indicates that the incongruent melting of enstatite (enstatite = forsterite + silica-rich melt) could extend to pressures above 5 GPa in KCl-bearing systems, in contrast to the behavior in the KCl-free system.  相似文献   

14.
A set of sheeted quartz veins cutting 380 Ma monzogranite at Sandwich Point, Nova Scotia, Canada, provide an opportunity to address issues regarding fluid reservoirs and genesis of intrusion-related gold deposits. The quartz veins, locally with arsenopyrite (≤5%) and elevated Au–(Bi–Sb–Cu–Zn), occur within the reduced South Mountain Batholith, which also has other zones of anomalous gold enrichment. The host granite intruded (P = 3.5 kbars) Lower Paleozoic metaturbiditic rocks of the Meguma Supergroup, well known for orogenic vein gold mineralization. Relevant field observations include the following: (1) the granite contains pegmatite segregations and is cut by aplitic dykes and zones (≤1–2 m) of spaced fracture cleavage; (2) sheeted veins containing coarse, comb-textured quartz extend into a pegmatite zone; (3) arsenopyrite-bearing greisens dominated by F-rich muscovite occur adjacent the quartz veins; and (4) vein and greisen formation is consistent with Riedel shear geometry. Although these features suggest a magmatic origin for the vein-forming fluids, geochemical studies indicate a more complex origin. Vein quartz contains two types of aqueous fluid inclusion assemblages (FIA). Type 1 is a low-salinity (≤3 wt.% equivalent NaCl) with minor CO2 (≤2 mol%) and has T h = 280–340°C. In contrast, type 2 is a high-salinity (20–25 wt.% equivalent NaCl), Ca-rich fluid with T h = 160–200°C. Pressure-corrected fluid inclusion data reflect expulsion of a magmatic fluid near the granite solidus (650°C) that cooled and mixed with a lower temperature (400°C), wall rock equilibrated, Ca-rich fluid. Evidence for fluid unmixing, an important process in some intrusion-related gold deposit settings, is lacking. Stable isotopic (O, D, S) analyses for quartz, muscovite and arsenopyrite samples from vein and greisens indicate the following: (1) δ18Oqtz = +11.7‰ to 17.8‰ and δ18Omusc = +10.7‰ to +11.2‰; (2) δDmusc = −44‰ to−54‰; and (3) δ34Saspy = +7.8‰ to +10.3‰. These data are interpreted, in conjunction with fluid inclusion data, to reflect contamination of a magmatic-derived fluid (d18OH2O {\delta^{{{18}}}}{{\hbox{O}}_{{{{\rm{H}}_{{2}}}{\rm{O}}}}}  ≤ +10‰) by an external fluid (d18OH2O {\delta^{{{18}}}}{{\hbox{O}}_{{{{\rm{H}}_{{2}}}{\rm{O}}}}}  ≥ +15‰), the latter having equilibrated with the surrounding metasedimentary rocks. The δ34S data are inconsistent with a direct igneous source based on other studies for the host intrusion (d18OH2O {\delta^{{{18}}}}{{\hbox{O}}_{{{{\rm{H}}_{{2}}}{\rm{O}}}}}  = +5‰) and are, instead, consistent with an external reservoir for sulphur based on δ34SH2S data for the surrounding metasedimentary rocks. Divergent fluid reservoirs are also supported by analyses of Pb isotopes for pegmatitic K-feldspar and vein arsenopyrite. Collectively the data indicate that the vein- and greisen-forming fluids had a complex origin and reflect both magmatic and non-magmatic reservoirs. Thus, although the geological setting suggests a magmatic origin, the geochemical data indicate involvement of multiple reservoirs. These results suggest multiple reservoirs for this intrusion-related gold deposit setting and caution against interpreting the genesis of intrusion-related gold deposit mineralization in somewhat analogous settings based on a limited geochemical data set.  相似文献   

15.
Calculated phase equilibria involving minerals and H2O–CO2–NaCl fluid lead to predictions of how infiltration of rock by H2O–NaCl fluids with X NaCl in the range 0–0.3 (0–58 wt% NaCl) drives the reactions calcite + quartz = wollastonite + CO2 and dolomite = periclase + calcite + CO2. Calculations focus on metamorphism in four aureoles that together are representative of the normal P–T conditions and processes of infiltration-driven contact metamorphic reactions. The effect of salinity on the spatial extent of oxygen isotope alteration was also computed. The time-integrated input fluid flux (q°) that displaces the mineral reaction front an increment of distance along the flow path always increases with increasing X NaCl. For input fluids with salinity up to approximately five times that of seawater (X NaCl ≤ 0.05), values of q° required to explain the spatial extent of decarbonation reaction are no more than 1.1–1.5 times that computed assuming the input fluid was pure H2O. For more saline fluids, values of q° may be up to 1.4–7.9 times that for pure H2O. Except for reaction in the presence of halite and vapor (V), infiltration of H2O–NaCl fluids expands the region of oxygen isotope alteration relative to the size of the region of mineral reaction. The expansion is significant only for saline fluids with X NaCl ≥ ~0.1. Immiscible fluid phase separation and differential loss of the liquid (L) or V phase from the mineral reaction site increases the amount of reactive fluid required to advance the mineral reaction front compared to conditions under which equilibration of minerals and fluid is attained with no loss of L or V. Decarbonation reactions driven by infiltration of fluids with even modest seawater-like salinity can explain the occurrence of salt-saturated fluid and solid halide inclusions in contact metamorphosed carbonate rocks.  相似文献   

16.
Sulfide Inhibition of Nitrate Removal in Coastal Sediments   总被引：1，自引：0，他引：1  
Microbial nitrate (NO3−) removal via denitrification (DNF) at high sulfide (H2S) concentrations was compared in sediment from a coastal freshwater pond in a developed area that receives salt-water influx during storm events, and a saline pond proximal to an undeveloped estuary. Sediments were incubated with added SO42− (1,000 μg per gram dry weight basis (gdw)) to determine whether acid volatile sulfides (AVS) were formed. DNF in the sediments was measured with NO3–N (300 μg gdw−1) alone, and with NO3–N and H2S (1,000 μg S2− gdw−1). SO42− addition to the freshwater sediments resulted in AVS formation (970 ± 307 μg S gdw−1) similar to the wetland with no added SO42− (986 ± 156 μg S gdw−1). DNF rates measured with no added H2S were greater in the freshwater than the wetland site (10.6 ± 0.6 vs. 6.4 ± 0.1 μg N2O–N gdw−1 h−1, respectively). High H2S concentrations retained NH4–N in the undeveloped wetland and retained NO3–N in the developed freshwater site, suggesting that potential salt-water influx may reduce the ability of the freshwater sediments to remove NO3–N.  相似文献   

17.
A pristine magnetite (Fe3O4) specimen was studied by means of Neutron Powder Diffraction in the 273–1,073 K temperature range, in order to characterize its structural and magnetic behavior at high temperatures. An accurate analysis of the collected data allowed the understanding of the behavior of the main structural and magnetic features of magnetite as a function of temperature. The magnetic moments of both tetrahedral and octahedral sites were extracted by means of magnetic diffraction up to the Curie temperature (between 773 and 873 K). A change in the thermal expansion coefficient around the Curie temperature together with an increase in the oxygen coordinate value above 700 K can be observed, both features being the result of a change in the thermal expansion of the tetrahedral site. This anomaly is not related to the magnetic transition but can be explained with an intervened cation reordering, as magnetite gradually transforms from a disordered configuration into a partially ordered one. Based on a simple model which takes into account the cation-oxygen bond length, the degree of order as a function of temperature and consequently the enthalpy and entropy of the reordering process were determined. The refined values are ΔH0 = −23.2(1.7) kJ mol−1 and ΔS0 = −16(2) J K−1 mol−1. These results are in perfect agreement with values reported in literature (Mack et al. in Solid State Ion 135(1–4):625–630, 2000; Wu and Mason in J Am Ceramic Soc 64(9):520–522, 1981).  相似文献   

18.
This paper presents a compilation of 16 present-day stress tensors along the southern Caribbean plate boundary zone (PBZ), and particularly in western and along northern Venezuela. As a trial, these new stress tensors along PBZ have been calculated from inversion of 125 focal mechanism solutions (FMS) by applying the Angelier & Mechler's dihedral method, which were originally gathered by the first author and published in 2005. These new tensors are compared to those 59 tensors inverted from fault-slip data measured only in Plio-Quaternary sedimentary rocks, compiled in Audemard et al. (2005), which were originally calculated by several researchers through the inversion methods developed by Angelier and Mechler or Etchecopar et al.The two sets of stress tensors, one derived from geological data and the other one from seismological data, compare very well throughout the PBZ in terms of both stress orientation and shape of the stress tensor. This region is characterized by a compressive strike-slip (transpressional senso lato), occasionally compressional, regime from the southern Mérida Andes on the southwest to the gulf of Paria in the east. Significant changes in direction of the maximum horizontal stress (σH = σ1) can be established along it though. The σ1 direction varies progressively from nearly east-west in the southern Andes (SW Venezuela) to between NW-SE and NNW-SSE in northwestern Venezuela; this direction remaining constant across northern Venezuela, from Colombia to Trinidad. In addition, the σV defined by inversion of focal mechanisms or by the shape of the stress ellipsoid derived from the Etchecopar et al.'s method better characterize whether the stress regime is transpressional or compressional, or even very rarely trantensional at local scale.The orientation and space variation of this regional stress field in western Venezuela results from the addition of the two major neighbouring interplate maximum horizontal stress orientations (σH): roughly east-west trending stress across the Nazca-South America type-B subduction along the pacific coast of Colombia and NNW-SSE oriented one across the southern Caribbean PBZ. Meanwhile, northern Venezuela, although dextral strike-slip (SS) is the dominant process, NW-SE to NNW-SSE compression is also taking place, which are both also supported by recent GPS results.  相似文献   

19.
A linear WNW–ESE trending dolerite dyke, having a width of 30–40 m and length of 3–4 km, exists in the catchment area of Himayatsagar reservoir in Ranga Reddy district of Andhra Pradesh state, India. A company has planned to set up an oil-based industrial unit a few kilometers away in the upstream side of the dyke. Hydrogeological, geophysical and tracer studies were carried out for establishing hydraulic connectivity across the dyke, which would in turn reflect on the possibility of contamination of the groundwater regime in the downstream side of the dyke due to discharge of effluents from the industry. The result of multiparameter investigations carried out in the area reveal that hydraulic connectivity exists across the dyke body.  相似文献   

20.
A 97-day-long record on waves and currents was obtained using wave rider buoy and current meter moored at 2.5 km off Gopalpur from 19 May to 23 August 2008 representing southwest monsoon months. A Valeport tide gauge was used to record water level at Gopalpur port. Simultaneously, beach profiles at 4 transects were monitored using real-time kinematic (RTK) global positioning system (GPS). A total of 636,167 waves were analyzed for the period; a range of 3,200–9,700 waves approach the coast in an individual day. During the study, unusual characteristics of wave were observed on July 29, 2008, with a magnitude of significant wave height, Hs = 2.85 m, maximum wave height, Hmax = 5.22 m, and peak wave period, Tp = 10.2 s, and on August 11, 2008, with Hs = 2.28 m, Hmax = 5.37 m, and Tp = 11.1 s. Significant beach loss was noticed during these periods, and severe erosion was recorded on August 1, 2008. Beach profile data indicates that 18–58 cu. m/m sediment was lost during the study period. The paper provides an overview of the statistical analysis of wave heights, periods, direction, and spectral energy density and explains the cause of coastal erosion and loss of sediment.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号