共查询到20条相似文献，搜索用时 108 毫秒
1.
通过对青藏高原五道梁地区中新世湖相叠层石样品岩石薄片、扫描电镜的观察,发现叠层石纹层主要有层带状、波状和柱状3种形态,且明暗纹层的结构极不相同,富屑层颗粒结构明显,富藻纹层由致密状含有机质泥晶方解石构成,呈泥晶结构;在此基础上,对叠层石进行了成因分类,认为研究区发育骨架叠层石、凝集叠层石和细粒叠层石。综合叠层石的沉积学、矿物学和稳定C,O同位素值特征,认为叠层石沉积期气候湿润,而纹层层偶则形成于呈季节性变化的气候条件下,亮层代表湿润期,暗层形成于相对干旱期。 相似文献
2.
沱沱河盆地通天河剖面渐新世雅西措群发现一套产于湖泛过程中的柱状叠层石。通过对叠层石纹层形态和显微组构的研究,发现这些叠层石具有典型的富藻纹层和富屑纹层交替的显微结构特征,发育三级生长节律,纹层对之间渐变接触,纹层带之间间断明显。采用激光微区取样的方法,针对4块样品的8个纹层对,系统采集了16对碳氧同位素数据,结果是富藻纹层同位素值整体上均高于富屑纹层,正相关性明显。这表明富藻纹层生长时期气候炎热湿润,富屑纹层生长时期相对寒冷干燥。认为湖相叠层石生长受周期性气候变化的控制,其韵律纹层记录了丰富的古气候信息。 相似文献
3.
青藏高原北部渐新统雅西措组湖相地层中的叠层石,具有典型的毫米级暗色富有机质纹层与浅色富碎屑纹层交替的生长节律,纹层形态呈穹窿状产出。为了探索湖湘叠层石纹层的成因和时间意义,我们采用激光微区采样技术分别对单个暗色纹层和浅色纹层进行了碳氧同位素分析。结果表明,每一个共轭纹层对中,暗色纹层相对于浅色纹层明显富集δ18O和δ13C,而且δ18O和δ13C之间具有正向变化关系,即δ18O和δ13C显示同步亏损和富集,反映季节性气候变化是影响纹层同位素信号周期性波动的主要因素,支持叠层石的对偶纹层为年纹层成因,它可以为气候和环境变化研究提供一种高分辨率地质材料。 相似文献
4.
黔中晚震旦世微生物岩及其磷的富集 总被引：1，自引：0，他引：1
我国南方晚震旦世广泛发育有包括叠层石、层纹石和核形石等组成的微生物岩, 其中以叠层石最为普遍; 黔中地区的磷质叠层石总体上以层礁产出为特点, 其中的藻类微生物化石已被确定的有丝状和球状两大类共１７ 个种属, 而细菌微生物参与成岩成矿作用的证据也常能见到。微生物岩中的磷质主要富集在叠层石的柱体部位, 特别是富集在柱体的富藻纹层中; 从微生物的矿化特点看, 其成矿作用可分为直接的和间接的两种不同机制的类型。与同期形成的碳酸盐叠层石相比, 磷质叠层石, 无论在种类的多样性或发育程度上都显得丰富多彩得多, 这可能与磷质叠层石所处的有利环境, 特别是对营造叠层石的微生物的生长所需的富磷水介质环境密切相关。 相似文献
5.
山东临朐山旺地区中新世山旺组硅藻土极为发育。通过对该地区硅藻土纹层的研究,确定其分类和成因,为进一步确立年纹层的存在、利用其进行高分辨率测年、探讨高频古气候旋回奠定基础。山旺组硅藻土的单层纹层厚度一般为100μm左右。依据纹层的物质成分,单层纹层可分为硅藻纹层、有机纹层和粘土纹层三种类型。各类单层纹层组合成为明暗相间的层偶,层偶厚度一般为100～400μm,常常表现为浅色的硅藻纹层逐渐向深色的粘土纹层或有机质纹层渐变过渡。纹层层偶可分为:薄层硅藻纹层-有机质层偶,厚层藻纹层-有机质层偶,薄层粘土纹层-有机质层偶,厚层粘土纹层-有机质层偶和硅藻纹层-粘土纹层层偶。山旺组硅藻土中不同类型的单层纹层以及层偶的形成主要受控于当时湖盆内粘土物质的沉积速率、硅藻的繁盛程度和有机物质的沉积和保存条件。 相似文献
6.
北极斯瓦尔巴德群岛Bolterskardet湖(78°06′N,16°01′E)发育了完好的纹层沉积。纹层显微研究及137Cs年龄数据表明该湖的纹层为年纹层(Varve)。纹层层偶由暗色的粉砂层和浅色的粘土微层组成。其形成机制为:在短暂的湖泊开封期,积雪及冰川的融化,携带大量的碎屑物在湖泊中沉积下来,形成颗粒较粗的粉砂层;而颗粒极细的粘土,形成于湖泊结冰后的静水环境。浅色的粘土微层是区别、鉴定年层偶的重要标志。较高的沉积速率、长期冰封、明显的季节水文特征以及封闭的地貌环境是该湖形成纹层的主要原因。Bolterskardet湖纹层厚度与夏季温度的变化… 相似文献
7.
在柴达木盆地发育了各种类型的渐新世—中新世湖相叠层石，其中丘状叠层石具有重要的地质意义，丘状叠层石直接生长在砾岩上，并向上逐渐演化为藻礁，藻礁向上又重新转化为叠层石沉积。通过对内部纹层特征和沉积组分的研究并结合叠层石的同位素、地球化学以及古生物资料分析表明，微生物自身的钙化作用以及微生物引发的沉淀作用形成了这种具有典型内部纹层的丘状叠层石。较高的温度、炎热和干燥的气候条件、坚硬的基底以及较少的藻类干扰作用是叠层石生成的主要因素。总体上，叠层石形成于较为低能的环境中，与高能环境中所形成的藻礁完全不同，而且两者具有明显的相互竞争作用。因此，与气候和水体条件密切相关的后生生物的生长和真核藻类的发育是叠层石在显生宙迅速衰落的主要因素。 相似文献
8.
太平洋中国开辟区锰结核生物成因研究 总被引：13，自引：2，他引：11
本文对叠层石（微小叠层石与奇异叠层石）及其建造者（中华微放线菌与太平洋螺球孢菌）在结核中显示的规律性特征,叠层石纹层与超微生物生长,主要锰矿物及Fe、Mn元素与叠层石类型之间关系以及超微生物直接成矿等作了深入研究。结果表明：锰结核中叠层石柱体一般都显示出纹层、纹层组与纹层带3个级别的生长韵律,明层菌丝体密集,暗层菌丝体稀疏;两种叠层石类型与超微生物化石种存在着良好的对应关系;主要锰矿物含量变化与叠层石类型密切相关;叠层石柱体内Fe、Mn元素分布比柱间空隙具有明显的规律性,而全球性大气化程度比生殖菌丝强;超微生物的生化作用与沉积粘附作用直接造成了结核中Fe、Mn元素的富集,而全球性大气修与洋底微环境的周期性变化,影响了微生物生长的兴衰,导致了明暗相间纹层的交替出现。我们认为,叠层石纹层显示的韵律性特征,是胶体化学作用与沉积作用难以形成的,只有微生物群体的世代繁衍,才能构筑成几乎固定不变的叠层石柱体形态。上述研究成果,进一步确立了大洋锰结核的生物成因观点。 相似文献
9.
上震旦统灯影组中非叠层石生态系兰细菌白云岩 总被引：10，自引：1，他引：10
上震旦统灯影组 2段和 3段是四川盆地主要天然气储层之一。在浅色白云岩地层中富含炭化的黑色非叠层石生态系兰细菌白云岩。它既可发育于沉积期和胶结作用期 ,也可发育于表生成岩作用期。沉积期发育的非叠层石生态系兰细菌白云岩呈纹层状产出或围绕颗粒的四周生长。这类兰细菌白云岩的单层厚度从 1mm到 >10 cm不等 ,其总厚度约占灯影组 2段和 3段的 1/ 10左右 ,有时也呈不连续的黑色小点发育于白色叠层石生态系兰细菌白云岩的叠层石、层纹石中。胶结作用期 ,二或三个世代亮晶胶结物交替发育“充填”孔隙。表生成岩作用期 ,黑色的兰细菌主要呈多世代的线状纹层与白色纤维状白云石组成多世代的间互纹层充填在岩溶溶洞、溶沟以及扩溶的裂隙中。非叠层石生态系兰细菌主要形态有球形、椭球形和棒形 ,偶有蘑菇形及其它形状。群体呈现为串珠状、草丛状、分叉树枝状和类似于火山喷发状等等。群体的古生态表现为向上生长、围绕颗粒向四周发散生长、粘结颗粒 ,或向原生粒间孔隙、次生溶洞、溶沟中心向心生长。对现代兰细菌的降解实验佐证所讨论的非叠层石生态系兰细菌是灯影组中烃源岩之一。 相似文献
10.
上震旦统灯影组中非叠层石生态系兰细菌白云岩 总被引：7，自引：0，他引：7
上震旦统灯影组2段和3段是四川盆地主要天然气储层之一.在浅色白云岩地层中富含炭化的黑色非叠层石生态系兰细菌白云岩.它既可发育于沉积期和胶结作用期,也可发育于表生成岩作用期.沉积期发育的非叠层石生态系兰细菌白云岩呈纹层状产出或围绕颗粒的四周生长.这类兰细菌白云岩的单层厚度从1mm到＞10cm不等,其总厚度约占灯影组2段和3段的1/10左右,有时也呈不连续的黑色小点发育于白色叠层石生态系兰细菌白云岩的叠层石、层纹石中.胶结作用期,二或三个世代亮晶胶结物交替发育"充填"孔隙.表生成岩作用期,黑色的兰细菌主要呈多世代的线状纹层与白色纤维状白云石组成多世代的间互纹层充填在岩溶溶洞、溶沟以及扩溶的裂隙中.非叠层石生态系兰细菌主要形态有球形、椭球形和棒形,偶有蘑菇形及其它形状.群体呈现为串珠状、草丛状、分叉树枝状和类似于火山喷发状等等.群体的古生态表现为向上生长、围绕颗粒向四周发散生长、粘结颗粒,或向原生粒间孔隙、次生溶洞、溶沟中心向心生长.对现代兰细菌的降解实验佐证所讨论的非叠层石生态系兰细菌是灯影组中烃源岩之一. 相似文献
11.
纹层是组成层理的基本单位,既可以是低能深水沉积环境的产物,也可能形成于高能环境中。在受风暴影响的区域,微小的泥质颗粒能够在流动过程中发生絮凝形成絮粒并沉积下来形成纹层。贵州习水吼滩剖面下奥陶统桐梓组碳酸盐岩纹层发育,纹层中风暴沉积构造丰富,包括风暴侵蚀面和渠模等。基于细致的野外观察和室内沉积学研究,将在风暴作用影响下形成的纹层划分为5个类型:平行厚纹层、单向交错薄纹层、平行薄纹层、波状厚纹层和水平厚纹层。采用EDS元素面扫描方法,发现亮、暗纹层中都含有铝、硅和镁元素且分布都比较均匀,而暗纹层所含黏土矿物稍多,所以暗纹层中3种元素的含量比亮纹层的稍高。利用开尔文—赫姆霍兹不稳定性解释了亮、暗纹层的形成机制,即絮粒与未发生絮凝的微小颗粒在开尔文—赫姆霍兹不稳定性作用下交替沉积,其中以絮粒为主的纹层更容易发生重结晶形成亮纹层。根据各纹层不同的垂向结合序列划分出3种风暴序列,且从Ⅰ型到Ⅲ型风暴作用逐渐减弱。 相似文献
12.
The research of deep-water combined-flow deposits is still in its infancy at present, which has great significance for discovering new case study and discussing the indication effects of combined-flow sedimentary structures on depositional environment. The Upper Ordovician Lashenzhong Formation in Zhuozishan area, Inner Mongolia, in the north of western Ordos Basin, is mainly deposited by turbidity currents concomitant with contour currents as well as internal-waves and internal-tides in deep-water slope and basin floor environment which display typical complex hydrodynamic conditions. Here we studied the deep-water combined-flow sedimentary structures of Lashenzhong Formation in detail based on careful field work, combined with the results of flume experiments and other related case studies in literatures. Several combined-flow sedimentary structures were found in deep-water environment, which include combined-flow-ripple lamination, quasi-planar lamination and small-scale hummocky cross-stratification-like structures. These sedimentary structures can be summarized vertically as 6 sedimentary structure successions: normal graded layer through wave-ripple lamination to combined-flow-ripple lamination (a), quasi-planar lamination through normal graded layer to combined- flow-ripple lamination (b), amphibolous normal graded layer overlaying by quasi-planar lamination (c), quasi-planar lamination through bi-directional cross-lamination to small-scale hummocky cross-stratification-like structures (d), amalgamated small-scale hummocky cross-stratification-like structures enveloped claystone (e) and combined- flow-ripple lamination enveloped claystone (f). The origin of deep-water combined-flow deposits perhaps is the interactions of turbidity currents, contour currents and internal-wave currents according to the sedimentary types and environment in Lashenzhong Formation. Based on the interactions between sedimentary currents and sea floor topography, four sedimentation zones were suggested: turbidity currents restrained zone (succession a and b), strong interaction zone (succession c), internal-wave action zone (succession d) and weak interaction zone (succession e and f). This study will be helpful for the study of interactions of internal-waves and internal-tides with sea floor topography, and related sedimentation zone division in geological records. 相似文献
13.
基于爆破相似理论建立含软弱夹层顺层岩体边坡爆破的力学模型,并介绍模型爆破层裂试验和剪切试验的设计思路及试验方法。以某石灰石矿采场黏土质夹层物为软弱夹层原料,通过相似模型试验研究爆破作用下含软弱夹层岩体边坡的层裂特性及稳定性。试验结果表明,爆破后可将软弱夹层分为爆腔区、压密区、影响区和无扰动区;爆腔区、压密区和影响区构成模型层裂区;爆前模型抗滑稳定安全系数最大、爆后次之、爆破过程中最小;层裂范围直接影响模型抗滑稳定安全系数。软弱夹层厚度对模型的层裂范围和抗滑稳定安全系数有较大影响。 相似文献
14.
褶皱是挤压造山带中最普遍的地质构造,但是为什么在地震反射剖面上却极少呈现褶皱呢?本文从一个构造地质学者的角度出发,数值模拟了几种常见褶皱构造的地震波反射响应。结果表明,传统的反射地震技术并不能正确成像闭合褶皱、斜歪或倒转褶皱及二级以上的多级复合褶皱。褶皱陡倾翼的反射消失,而褶皱转折端的反射形成一系列断断续续分布的假水平层理,这些假水平层理在下地壳中极易被错误地解释成由地壳拉张形成的水平构造层理或由底侵作用形成的水平基性岩席。笔者认为,老、中、新褶皱造山带的下地壳中大多数不连续水平反射可能是由褶皱造成的。 相似文献
15.
应用水槽试验研究了粘性泥沙的运动特性及水流条件和泥沙浓度对粘性泥沙运动的影响。实验结果表明,在一定的水流和泥沙浓度条件下,粘性泥沙运动存在着特殊运动形式——"分层运动","分层运动"形成时水槽中泥沙浓度沿垂线分布成"阶梯"形状,水流流速沿垂线分布为中部最大,向水面和水槽底部方向流速减小。分层运动的形成及其特征与水流条件泥沙浓度等因素密切相关,不同的泥沙浓度下形成分层运动的水动力条件不同,泥沙浓度增加,形成分层运动的水流强度也相应增加。 相似文献
16.
进行含软弱夹层顺倾边坡单孔爆破数值模拟,分析爆破过程中上覆岩体受到的应力作用、爆破层裂效应及其对边坡稳定性的影响。模拟结果表明,爆破层裂作用具有分区特性,爆轰气体对夹层的冲刷、推移作用形成夹层爆腔区,爆腔区外围是压密区,其次是离析区,离析区以外的夹层未受爆破层裂作用的影响;上覆岩体在空腔区受到爆轰气体膨胀压力作用,临近夹层壁面的峰值压力达0.75 GPa,压密区受到夹层挤压衍生的向上压力作用,压力峰值达0.21 GPa,且压力衰减较慢;空腔区的上覆岩体与夹层脱离,压密区和离析区改变了夹层与上覆岩体的接触状态,使模型的稳定性降低。剪切试验验证了数值模拟关于爆破层裂效应降低模型稳定性的结论。 相似文献
17.
内波、内潮汐沉积和复合流沉积是二十余年来在古代深水环境中新发现的一种具牵引流性质的沉积相类型,由于地层沉积记录十分有限,制约了深水底流沉积的沉积学研究。大比例尺实测地质剖面和精细露头测量表明,底流沉积发育于凭祥盆地深水沉积之中,通过对其沉积构造精细剖析和古水流测量,识别出内波、内潮汐沉积和复合流沉积,其中内波、内潮汐沉积以双向交错层理、单向交错层理、透镜状层理为特征,复合流沉积以复合流层理、丘状交错层理和较陡的爬升波纹层理为特征,进一步表明存在浊流和底流的交互作用,为古代地层中的深水底流沉积提供了又一研究实例。 相似文献
18.
M. W. HOUNSLOW 《Sedimentology》1987,34(1):117-128
There is little visible primary hydrodynamic lamination preserved in the Bridport-Yeovil Sands as a result of intense bioturbation. Where lamination is present, it exhibits wave-produced characteristics, although current ripple lamination is also found. The grain orientation of a variety of bioturbated and non-bioturbated fine-grained sandstones has been determined by measuring the magnetic susceptibility anisotropy. The magnetic fabric is of a primary style and preserves two lineation directions approximately 90° apart in azimuth. These lineation directions are interpreted as the result of grain long-axis orientations produced by wave and current processes. The magnetic fabric is dominantly carried by a small proportion of paramagnetic minerals, thought to be largely detrital chlorite and micas. This magnetic fabric has been acquired by depositional alignment of the detrital phyllosilicates and by reorientation of the phyllosilicates during the early stages of compaction. The magnetic fabric of the intensely bioturbated sandstone is not significantly different in magnitude characteristics or in the preservation of lineation directions from that of the non-bioturbated sandstone. 相似文献
19.
Seismic lamination and anisotropy of the Lower Continental Crust 总被引：2，自引：3，他引：2
Seismic lamination in the lower crust associated with marked anisotropy has been observed at various locations. Three of these locations were investigated by specially designed experiments in the near vertical and in the wide-angle range, that is the Urach and the Black Forrest area, both belonging to the Moldanubian, a collapsed Variscan terrane in southern Germany, and in the Donbas Basin, a rift inside the East European (Ukrainian) craton. In these three cases, a firm relationship between lower crust seismic lamination and anisotropy is found. There are more cases of lower-crustal lamination and anisotropy, e.g. from the Basin and Range province (western US) and from central Tibet, not revealed by seismic wide-angle measurements, but by teleseismic receiver function studies with a P–S conversion at the Moho. Other cases of lamination and anisotropy are from exhumed lower crustal rocks in Calabria (southern Italy), and Val Sesia and Val Strona (Ivrea area, Northern Italy). We demonstrate that rocks in the lower continental crust, apart from differing in composition, differ from the upper mantle both in terms of seismic lamination (observed in the near-vertical range) and in the type of anisotropy. Compared to upper mantle rocks exhibiting mainly orthorhombic symmetry, the symmetry of the rocks constituting the lower crust is either axial or orthorhombic and basically a result of preferred crystallographic orientation of major minerals (biotite, muscovite, hornblende). We argue that the generation of seismic lamination and anisotropy in the lower crust is a consequence of the same tectonic process, that is, ductile deformation in a warm and low-viscosity lower crust. This process takes place preferably in areas of extension. Heterogeneous rock units are formed that are generally felsic in composition, but that contain intercalations of mafic intrusions. The latter have acted as heat sources and provide the necessary seismic impedance contrasts. The observed seismic anisotropy is attributed to lattice preferred orientation (LPO) of major minerals, in particular of mica and hornblende, but also of olivine. A transversely isotropic symmetry system, such as expected for sub-horizontal layering, is found in only half of the field studies. Azimuthal anisotropy is encountered in the rest of the cases. This indicates differences in the horizontal components of tectonic strain, which finally give rise to differences in the evolution of the rock fabric. 相似文献
20.
ABSTRACT Permian aeolian sediments on the island of Arran are divisible into dune (including draa) and interdune deposits. Both types display a distinctive and unusually wide variation in grain size. The dominant features of the dune deposits are grainfall lamination, sandflow lamination, and inverse graded lamination associated with ripple-form lamination and normal graded lamination. The flat-lying aeolian interdune deposits are characterised by granule and sand ripples, horizontal lamination in coarse sand and granules, plane bed lamination and inverse graded lamination. Associated structures include ripple-form lamination and deflation lags. Three types of trace fossil associated with completely bioturbated horizons occur in some low-angle dune and interdune deposits.
The aeolian facies interfinger with alluvial fan deposits giving rise to three recognizable facies belts. Marginal aeolian deposits are associated with fluvial conglomerates and are dominated by interdune deposits and occasionally very thin barchan deposits (set height 3-37 cm). Intermediate aeolian deposits are characterized by interbedded crescentic dune, small draa (dune set height 5 cm-4.5 m) and interdune deposits, and rare fluvial and lake sediments. Basinal aeolian deposits are dominated by draa deposits (dune set height 0.2-28 m) associated with rare interdune sediments. Transverse dunes and draas were moved by north-eastern palaeowinds towards the foot of the alluvial fans. The aeolian sediments were deposited in a fault-bounded desert basin. 相似文献
The aeolian facies interfinger with alluvial fan deposits giving rise to three recognizable facies belts. Marginal aeolian deposits are associated with fluvial conglomerates and are dominated by interdune deposits and occasionally very thin barchan deposits (set height 3-37 cm). Intermediate aeolian deposits are characterized by interbedded crescentic dune, small draa (dune set height 5 cm-4.5 m) and interdune deposits, and rare fluvial and lake sediments. Basinal aeolian deposits are dominated by draa deposits (dune set height 0.2-28 m) associated with rare interdune sediments. Transverse dunes and draas were moved by north-eastern palaeowinds towards the foot of the alluvial fans. The aeolian sediments were deposited in a fault-bounded desert basin. 相似文献