首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Pegmatite deposits commonly occur in the 1500 km long, N-S-trending, tungstentin-bearing granitoid belt in Myanmar. Pegmatites are emplaced as veins and dikes that cut granitoid, migmatite, granitoid gneiss, gneiss, and schist. The pegmatite veins and dikes are mostly 2 to 5 meters wide and 30 to 150 meters long, and some are traceable over a distance of 300 meters.

The pegmatites are composed of quartz, orthoclase, albite, microcline microperthite, and muscovite, with minor biotite, tourmaline, beryl, garnet, topaz, lepidolite, magnetite, wolframite, cassiterite, and rare columbite. They are commonly zoned, feldspars and muscovite being more abundant in the center and quartz more common at the margin. The zoning pattern is rather distinct in the pegmatite body, where tourmaline is present. The light-colored felsic minerals are confined to the core zone and the dark-colored tourmaline crystals to the outer zone.

Numerous fluid inclusions have been found in quartz, topaz, and beryl. Most of the inclusions are rounded to elliptical, with a variable degree of liquid filling. All inclusions are aqueous, two-phase (liquid and vapor) inclusions with no daughter minerals. Homogenization temperatures of 173 fluid inclusions were measured in this study.

Geothermometric studies indicate that the pegmatites were formed over a homogeniza-tion temperature range of 230° to 410°C. Salinities of fluid inclusions in pegmatite minerals yielded from 1.0 to 10.8 NaCl equiv. wt‰. Topaz and quartz single crystals (several cm across) from the Sakangyi pegmatite provide an opportunity to extract the fluids trapped in these minerals. The Na/K ratios of the fluid inclusions in two topaz samples were 3.0 to 4.9, and those of two quartz samples were 2.9 to 10.5, suggesting the presence of substantial potassium in the pegmatite-forming fluids. In this study, evidence for phase separation of the pegmatite-forming fluids was not observed. The post-magmatic, hydrothermal fluids responsible for the pegmatite veins evidently emanated from cooling S-type granitoids, with which they are spatially associated.  相似文献   

2.
The base metal sulfides of the Merensky Reef are associated with hydrous silicates and intense deuteric hydrous alteration of cumulus and postcumulus silicates. Biotite and phlogopite crystallized in the vicinity of sulfides from a volatile-enriched highly fractionated intercumulus melt. Amphibole, chlorite, and talc are later alteration phases of cumulus pyroxene and intercumulus plagioclase. Biotite is often accompanied by zircon, rutile, and quartz. Accessory quartz hosts a complex suite of H2O-NaCl-(CaCl2)-CO2-CH4 fluid inclusions which have thus far not been described from the Merensky Reef. The earliest fluid inclusion compositions are NaCl-(H2O) with less than 10 vol.% water; CO2 coexisting with a halite daughter crystal and brine; and polyphase inclusions with up to six daughter and accidental phases and high contents of divalent cations. The maximum trapping temperature is around 730° C at 4 to 5 kb pressure. Later inclusion generations are H2O-NaCl, CO2-H2O, and pure CO2 and CH4. The presence of Cl-rich fluids during the intercumulus stage of the crystallizing Merensky Reef is directly related to the mode of sulfide precipitation. Prior to sulfide unmixing in a hydrous magma sulfur is likely to be present as H2S. Sulfur saturation causes reaction of H2S with oxides of the silicate melt to form a sulfide melt plus water. During reaction the magma is enriched in water until a separate fluid unmixes. It carries all compounds with high fluid/melt partition coefficients, as well as metals capable of forming OH- and Cl-complexes. Precious metals are assumed to have fractionated into the Cl-rich fluid as Cl-complexes rather than being dissolved in the sulfide melt. During the cooling evolution of the fluid the precious elements precipitate around the periphery of sulfide melt droplets. The model proposed explains the distribution pattern of platinum-group minerals in the Merensky Reef better than any orthomagmatic mineralization concept offered so far.  相似文献   

3.
The Platreef unit of the northern Bushveld Complex comprises a diverse package of pyroxenites, peridotites and mafic lithologies with associated Ni–Cu–platinum-group element (PGE) mineralisation. Base metal sulphides (BMS) are generally more abundant in the Platreef than in other Bushveld PGE deposits, such as the Merensky Reef and the UG2 chromitite, but the Platreef, though thicker, has lower overall PGE grades. Despite a commonly held belief that PGEs are closely associated with sulphide mineralisation, a detailed study by laser ablation ICP-MS (LA-ICP-MS) on a core through the Platreef at Turfspruit suggests that this is not strictly the case. While a significant proportion of the Pd, Os and Ir were found to be hosted by BMS, Pt, irrespective of its whole-rock concentration, was not. Only at the top of the Platreef is Pt directly associated with sulphide minerals where Pt–Pd–(±Sb)–Te–Bi-bearing inclusions were detected in the chalcopyrite portions of large composite sulphides. In contrast, Pd, Os, and Ir occur in solid solution and as discrete inclusions within the BMS throughout the core. For Os and Ir, this is usually in the form of Os–Ir alloys, whereas Pd forms a range of Pd–Te–Bi–(Sb) phases. Scanning electron microscope observations on samples from the top of the core revealed the presence of ≤0.2-mm-long (PtPd)2(Sb,Te,Bi)2 michenerite–maslovite laths within the chalcopyrite portions of large composite sulphides. Additional Pt-bearing minerals, including sperrylite and geversite, and a number of Pd(–Te–Bi–Sb) minerals were observed in, or close to, the alteration rims of these sulphides. This textural association was observed throughout the core. Similar platinum-group minerals (PGMs) were observed within the felsic assemblages composed of quartz, plagioclase, alkali feldspar and clinopyroxene produced by late-stage felsic melts that permeated the Platreef. Many of these PGMs occur a significant distance away from any sulphide minerals. We believe these features can all be linked to the introduction of As, Sb, Te and Bi into the magmatic system through assimilation of sedimentary footwall rocks and xenoliths. Where the degree of contamination was high, all of the Pt and some of the Pd formed As- and Sb-bearing PGM that were expelled to the edges of the sulphide droplets. Many of these were redistributed where they came into contact with late-stage felsic melts. Where no felsic melt interactions occurred, the expelled Pt- and Pd-arsenides and antimonides remained along the margins of the sulphides. At the top of the Platreef, where the effects of contamination were relatively low, some of the Pt remained within the sulphide liquids. On cooling, this formed the micro-inclusions and blade-like laths of Pt–Pd–(Sb)–Bi–Te in the chalcopyrite.  相似文献   

4.
We analyzed 85 fluid inclusions from seven samples from the porphyry Cu–Mo deposit in Butte, MT, using laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). The Butte deposit formed at unusually great depth relative to most porphyry deposits, and fluid inclusions in deep veins trapped a low-salinity, CO2-bearing, magmatically derived, supercritical fluid as a single aqueous phase. This fluid is interpreted to be the parent fluid that cooled, decompressed, unmixed, and reacted with wall rock to form the gigantic porphyry Cu deposit at Butte. Few previous analyses of such fluids exist.Low-salinity, aqueous fluids from the earliest veins at Butte are trapped in deep veins with biotite-rich alteration envelopes (EDM veins). These veins, and the Butte quartz monzonite surrounding them, host much of the Butte porphyry Cu mineralization. Twenty fluid inclusions in one EDM quartz vein are dominated by Na, K, Fe (from 0.1 to 1 wt.%) and contain up to 1.3 wt.% Cu. These inclusions contain only small amounts (tens of ppm) of Pb, Zn, and Mn, and typically contain Li, B, Ca, As, Mo, Ag, Sn, Sb, Ba, and W in less than detectable quantities. The abundance of Cu in early fluids indicates that a low-salinity, Cu-rich, aqueous ore fluid can be directly produced by aqueous fluid separation from a granitic magma. Similar inclusions (eight) in an early deep quartz–molybdenite vein with a K-feldspar selvage have similar compositions but contain significantly less Cu than most inclusions in the biotite-altered vein. Analyzed inclusions in both veins contain less than detectable concentrations of Mo even though one is molybdenite-bearing.Low-salinity, CO2-bearing aqueous fluids are also trapped in pyrite–quartz veins with sericitic selvages. These veins cut both of the above vein types and contain inclusions that were trapped at lower pressure and temperature. Thirty-nine inclusions in two such veins have compositions similar to early fluids, but are enriched by up to a factor of 10 in Mn, Pb, and Zn relative to early fluids, and are slightly depleted in Fe. Many of these inclusions contain as much or more Cu than early fluids, although little chalcopyrite is found in or around pyrite–quartz veins.Eighteen halite-bearing inclusions from three veins from both chalcopyrite-bearing and barren veins with both K-silicate and sericitic selvages were analyzed as well. Halite-saturated inclusions are dominated by Na, K, Fe, and in some inclusions Ca. Whereas these inclusions are significantly enriched in Ca, Mn, Fe, Zn, and Pb, fluids in all three veins contain significantly less Cu than early, high temperature, low-salinity inclusions.Analyses of all inclusion types show that whereas bulk-salinity of the hydrothermal fluid must be largely controlled by the magma, fluid–rock interactions have a significant role in controlling fluid compositions and metal ratios. Cu concentrations range over an order of magnitude, more than any other element, in all four samples containing low-salinity inclusions. We infer that variations are the result of fluid trapping after different amounts of fluid–rock reaction and chalcopyrite precipitation. Enrichment, relative to early fluids, of Mn, Pb, and Zn in fluids related to sericitic alteration is also likely the result of fluid–rock reaction, whereby these elements are released from biotite and feldspars as they alter to sericite. In halite-bearing inclusions, concentrations of Sr, Ca, Pb, and Ba are elevated in inclusions from the pyrite–quartz vein with sericitic alteration relative to halite-bearing inclusions from unaltered and potassically altered samples. Such enrichment is likely caused by the breakdown of plagioclase and K-feldspar in the alteration envelope, releasing Sr, Ca, Pb, and Ba.  相似文献   

5.
川西甲基卡二云母花岗岩和伟晶岩内发育大量原生熔体包裹体和富晶体流体包裹体。为了查明甲基卡成矿熔体、流体性质与演化特征,运用激光拉曼光谱和扫描电镜鉴定了甲基卡花岗伟晶岩型锂矿床中二云母花岗岩及伟晶岩脉不同结构带内的原生熔体、流体包裹体的固相物质。分析结果表明,甲基卡二云母花岗岩石英内熔体包裹体的矿物组合为磷灰石+白云母、白云母+钠长石、白云母+石墨;伟晶岩绿柱石内富晶体流体包裹体的矿物组合主要为刚玉、富铝铁硅酸盐+刚玉+锂辉石、锂辉石+石英+锂绿泥石;伟晶岩锂辉石内富晶体流体包裹体的矿物组合主要为磷灰石、锡石、磁铁矿、石英+钠长石+锂绿泥石、萤石、富钙镁硅酸盐+富铁铝硅酸盐+富铁硅酸盐+石英;花岗岩浆熔体与伟晶岩浆熔体(流体)具有一定的差异,成矿熔体、流体成分总体呈现出碱质元素(Na、Si、Al)、挥发分(F、P、CO_2)含量增高及基性元素(Fe、Mg、Ca)降低的特征;包裹体中子矿物与主矿物的化学成分具有一定的差别,揭示出伟晶岩熔体(流体)存在局部岩浆分异作用,具不混溶性及非均匀性。因此认为,伟晶岩熔浆(流体)为岩浆分异与岩浆不混溶共同作用的产物,挥发分含量的增高(F、P、CO_2)使伟晶岩能够与稀有金属组成各类络合物或化合物,这对于稀有金属成矿起到了至关重要的作用。  相似文献   

6.
In the Sanandaj-Sirjan zone of metamorphic belt of Iran, the area south of Hamadan city comprises of metamorphic rocks, granitic batholith with pegmatites and quartz veins. Alvand batholith is emplaced into metasediments of early Mesozoic age. Fluid inclusions have been studied using microthermometry to evaluate the source of fluids from which quartz veins and pegmatites formed to investigate the possible relation between host rocks of pegmatites and the fluid inclusion types. Host minerals of fluid inclusions in pegmatites are quartz, andalusite and tourmaline. Fluid inclusions can be classified into four types. Type 1 inclusions are high salinity aqueous fluids (NaCleq >12 wt%). Type 2 inclusions are low to moderate salinity (NaCleq <12 wt%) aqueous fluids. Type 3 and 4 inclusions are carbonic and mixed CO2-H2O fluid inclusions. The distribution of fluid inclusions indicate that type 1 and type 2 inclusions are present in the pegmatites and quartz veins respectively in the Alvand batholith. This would imply that aqueous magmatic fluids with no detectable CO2 were present during the crystallization of these pegmatites and quartz veins. Types 3 and 4 inclusions are common in quartz veins and pegmatites in metamorphic rocks and are more abundant in the hornfelses. The distribution of the different types of fluid inclusions suggests that CO2 fluids generated during metamorphism and metamorphic fluids might also contribute to the formation of quartz veins and pegmatites in metamorphic terrains.  相似文献   

7.
The layered Bushveld Complex hosts a number of chromitite layers, which were found to contain significant amounts of zircon grains compared with adjacent silicate rocks. Cathodoluminescent-dark, partially metamict cores and transparent rims of composite zircon grains were analyzed for trace elements with SIMS and LA-ICPMS techniques. The cores are enriched in REE, Y, Th and U and are characterized by distinctly flatter REE patterns in contrast to those of the rims and transparent homogenous crystals. Zircon from the different stratigraphic units has specific Th/U ratios, the highest of which (1.5–4) occurs in a Merensky Reef zircon core. The Ti content of Bushveld zircon ranges from 12 to 52 ppm correlating to a crystallization temperature range of 760–930 °C. The geochemical characteristics of the first zircon generation are consistent with its high-temperature crystallization as the first major U, Th and REE acceptor from a highly-evolved residue of the high-Mg basalt magma, whereas the rims and coreless crystals have crystallized from percolating intercumulus liquid of new influx of the same magma. U-Pb SHRIMP dating of zircon cores and rims does not reveal a distinguishable difference between their ages indicating the absence of inherited zircon. Concordia ages of 2,051?±?9 Ma (2σ, MSWD?=?0.1) and 2,056?±?5 Ma (2σ, MSWD?=?0.05) for zircons from the Merensky Reef and the Upper Platreef located equally near the top of the Critical Zone are in agreement with published ages for the Merensky Reef. Zircon from the deeper-seated Lower Group, Middle Group and Lower Platreef chromitites yields younger concordia ages that may reflect prolonged late-stage volatile activity.  相似文献   

8.
Diamond drill core traverses across the Platreef were carried out at Tweefontein, Sandsloot, and Overysel in order to establish the relationship between crustal contamination and platinum group element (PGE) mineralization. The footwall rocks are significantly different at each of these sites and consist of banded iron formation and sulfidic shales at Tweefontein, of carbonates at Sandsloot, and of granites and granite gneisses at Overysel. As demonstrated in this study, Platreef rocks are characterized by two stages of crustal contamination. The first contamination event occurred prior to emplacement of the magma and is present in Platreef rocks at all three sites, as well as in the Merensky Reef. This event is readily identified on trace element spidergrams and trace element ratio scattergrams. The second contamination event was induced by interaction of the Platreef magma with the local footwall rocks. It is most easily identified at Tweefontein, where there is a large increase in the FeO content of the Platreef rocks, and at Sandsloot, where there is a large increase in their CaO and MgO contents, relative to Bushveld rocks that are uncontaminated by the local footwall rocks. At Overysel, the second contamination event did not result in pronounced changes in the major element composition of the Platreef rocks, but can be detected in their trace element chemistry. A strong inverse relationship between PGE tenors and S/Se ratios is interpreted to suggest that the PGE-rich sulfides were formed prior to emplacement of the Platreef magmas through assimilation of crustal S and became progressively enriched in the PGE during transport. Rather than promoting S-saturation, interaction of the Platreef magma with the footwall rocks diluted the metal tenors of the sulfides. Although both the Platreef and the Merensky Reef magmas were contaminated by the same crustal contaminant and were probably PGE-rich, they have radically different Pd/Pt ratios. Their Pd/Pt ratios suggest that whereas the Merensky Reef magma became PGE-rich due to dissolution of PGE-rich sulfides segregated from a pre-Merensky magma that had undergone relatively little fractionation prior to reaching S-saturation, the pre-Platreef magma had undergone greater fractionation prior to the sulfide saturation event, thereby increasing its Pd/Pt ratio. We suggest that the magmas that formed the Platreef and Merensky Reef may have simply been carrier magmas for sulfides that had formed elsewhere in the plumbing system of the Bushveld Complex by the interaction of earlier generations of magmas with the crustal rocks that underlie the Complex.  相似文献   

9.
Melt inclusions and aqueous fluid inclusions in quartz phenocrysts from host felsic volcanics, as well as fluid inclusions in minerals of ores and wall rocks were studied at the Cu-Zn massive sulfide deposits in the Verkhneural’sk ore district, the South Urals. The high-temperature (850–1210°C) magmatic melts of volcanic rocks are normal in alkalinity and correspond to rhyolites of the tholeiitic series. The groups of predominant K-Na-type (K2O/Na2O = 0.3–1.0), less abundant Na-type (K2O/Na2O = 0.15–0.3), and K-type (K2O/Na2O = 1.9–9.3) rhyolites are distinguished. The average concentrations (wt %) of volatile components in the melts are as follows: 2.9 H2O (up to 6.5), 0.13 Cl (up to 0.28), and 0.09 F (up to 0.42). When quartz was crystallizing, the melt was heterogeneous, contained magnetite crystals and sulfide globules (pyrrhotite, pentlandite, chalcopyrite, bornite). High-density aqueous fluid inclusions, which were identified for the first time in quartz phenocrysts from felsic volcanics of the South Urals, provide evidence for real participation of magmatic water in hydrothermal ore formation. The fluids were homogenized at 124–245°C in the liquid phase; the salinity of the aqueous solution is 1.2–6.2 wt % NaCl equiv. The calculated fluid pressure is very high: 7.0–8.7 kbar at 850°C and 5.1–6.8 kbar at 700°C. The LA-ICP-MS analysis of melt and aqueous fluid inclusions in quartz phenocrysts shows a high saturation of primary magmatic fluid and melt with metals. This indicates ore potential of island-arc volcanic complexes spatially associated with massive sulfide deposits. The systematic study of fluid inclusions in minerals of ores and wall rocks at five massive sulfide deposits of the Verkhneural’sk district furnished evidence that ore-forming fluids had temperature of 375–115°C, pressure up to 1.0–0.5 kbar, chloride composition, and salinity of 0.8–11.2 (occasionally up to 22.8) wt % NaCl equiv. The H and O isotopic compositions of sericite from host metasomatic rocks suggest a substantial contribution of seawater to the composition of mineral-forming fluids. The role of magmatic water increases in the central zones of the feeding conduit and with depth. The dual nature of fluids with the prevalence of their magmatic source is supported by S, C, O, and Sr isotopic compositions. The TC parameters of the formation of massive sulfide deposits are consistent with the data on fluid inclusions from contemporary sulfide mounds on the oceanic bottom.  相似文献   

10.
《Resource Geology》2018,68(1):37-50
The large, newly discovered Lijiagou pegmatite spodumene deposit, is located southeast of the Ke'eryin pegmatite ore field, in the central Songpan–Garze Fold Belt (SGFB), Eastern Tibet. The Lijiagou albite spodumene pegmatites are unzoned, granite‐pegmatites of the subtype LCT (Lithium, Cesium, and Tantalum) and consist of medium‐ to coarse‐grained spodumene, lepidolite, microcline, albite, quartz, muscovite, and accessory amounts of beryl, cassiterite, columbite–tantalite and zircon. Secondary fluid inclusions in quartz and spodumene include two‐phase aqueous inclusions (V + L), mono‐phase vapor inclusions (V); three‐phase CO2‐rich CO2–H2O inclusions (CO2 + V + L) and less abundant liquid inclusions (L). The homogenization temperature of the fluid inclusions are low (257.3 to 204.3°C in early stage, 250.3 to 199.6°C in middle stage, 218.7 to 200.6°C in late stage). Fluid inclusions were formed during the long cooling period from the temperature of the pegmatite emplacement. Liquid–vapor–gas boiling was extensive during the middle and late stages. The salinity of the corresponding stages are 15.4 to 13.0 wt.% NaCl equiv., 12.5 to 9.1 wt.% NaCl equiv. and 9.8 to 7.8 wt.% NaCl equiv., respectively. δ18O values of fluid are 7.2 to 5.2‰, 5.6 to 3.9‰ and 2.7 to −0.2‰ from early to late stages; and δD range from −75.1 to −76.8‰, −59.0 to −73.5‰ and −61.6 to −85.5‰ respectively. The δ13C of CO2 values are −5.6 to −6.6‰, −8.5 to −19.9‰, −11.8 to −18.7‰ from early to late stages, suggesting that CO2 in the fluids were probably sourced from a magmatic system, possibly with some mixing of CO2 dissolved in groundwater. δD and δ18O values of fluid indicate that the fluids were originally magmatic water and mixed with some meteoric water in late stage. The magma evolution sequence in the Ke'eryin orefield, from the central two‐mica granite through the Lijiagou deposit out to the distal pegmatites, with the ages gradually decreasing, indicates that the Ke'eryin complex rocks are the product of multistage magmatic activity. The large Lijiagou spodumene deposit is a typical magmatic, fractional crystallization related pegmatite deposit.  相似文献   

11.
Abstract: The Anle Sn‐Cu and Huanggangliang Fe‐Sn deposits have been exploited in the Linxi district, which is located 165 km northwest of Chifeng City in northern China. In this study the formation mechanisms of the tin deposits in the Anle and Huanggangliang mining area were investigated to understand the mechanisms of tin mineralization in northern China. The veins of the Anle deposit are divided into cassiterite–quartz–chlorite veins, chalcopyrite‐bearing quartz veins, cassi–terite–chalcopyrite–bearing quartz veins and sphalerite‐quartz veins. The sequence of mineralization is tin mineralization (stage I), copper mineralization (stage II), and lead‐zinc mineralization (stage III). The Huanggangliang tin deposit consists of magnetite skarn orebodies and many cassiterite‐bearing feldspar–fluorite veins and veinlets cutting the magnetite orebodies. The fluid inclusions in quartz and fluorite in ores from the Anle and Huanggangliang tin deposits are divided into two‐phase fluid inclusions, vapor‐rich fluid inclusions and poly‐phase fluid inclusions. The final homogenization temperatures of fluid inclusions of quartz in the ores of the Anle deposit and fluorite of tin‐bearing feldspar veins in the Huanggangliang tin deposit range from 195 to 425C and from 215 to 450C, respectively. The fluids responsible for the Anle and Huanggangliang tin deposits were of very high temperature and NaCl‐rich ones containing K, Ca, Al, Si, Ti, Fe and Cl in addition to ore metals such as Sn and Cu. The temperature and chemical composition of fluid in fluid inclusions of igneous rocks in the mining area are very similar to those of fluid in fluid inclusions in the ores of these deposits. The fluid for these ore deposits had a close relation with the fluid coexisting with melt of Late Jurassic granitic rocks in this mining area. Salinities of fluid inclusions from these ore deposits and granitic rocks in the mining area were estimated to range from 35 to 50 wt % NaCl equivalent. Based on arsenopy‐rite geothermometry and fluid inclusion studies, a fluid containing 40 wt% NaCl (eq.) could be formed by phase separation of fluid having 6 wt% NaCl (eq.) at a temperature of 420 to 500C and a pressure of 0.3 to 0.4 kb. The temperatures and pressures presented above indicate an NaCl‐rich magmatic fluid derived from granitic melt that had intruded into a shallow level of crust caused the Sn–Fe–Cu mineralization of the mining area. The geological relationship between these ore deposits and granitic bodies around the ore deposits, and the similarity of fluids forming these ore deposits and coexisting with granitic melt, suggest that these ore deposits were formed by the activity of fluid derived from granitic melt in Late Jurassic age.  相似文献   

12.
The Zhawulong granitic pegmatite lithium deposit is located in the Ganzi-Songpan orogenic belt. Fluid inclusions in spodumene and coexisting quartz were studied to understand the cooling path and evolution of fluid within albite–spodumene pegmatite. There are three distinguishable types of fluid inclusions: crystal-rich, CO2–NaCl–H2O, and NaCl–H2O. At more than 500°C and 350~480 MPa, crystal-rich fluid inclusions were captured during the pegmatitic magma-hydrothermal transition stage, characterized by a dense hydrous alkali borosilicate fluid with a carbonate component. Between 412°C and 278°C, CO2–NaCl–H2Ofluid inclusions developed in spodumene (I) and quartz (II) with a low salinity (3.3–11.9 wt%NaCl equivalent) and a high volatile content, which represent the boundary between the transition stage and the hydrothermal stage. The subsequentNaCl–H2Ofluid inclusions from the hydrothermal stage, between 189°C and 302°C, have a low salinity (1.1–13.9 wt%NaCl equivalent). The various types of fluid inclusions reveal the P–T conditions of pegmatite formation, which marks the transition process from magmatic to hydrothermal. The ore-forming fluids from the Zhawulong deposit have many of the same characteristics as those from the Jiajika lithium deposit. The ore-forming fluid provided not only materials for crystallization of rare metal minerals, such as spodumene and beryl, but also the ideal conditions forthe growth of ore minerals. Therefore, this area has favorable conditions for lithium enrichment and excellent prospecting potential.  相似文献   

13.
庐山星子群变质流体的包裹体研究   总被引：2，自引：1，他引：1  
唐红峰  刘丛强  倪培 《矿物学报》2000,20(3):286-292
庐山星子群沉积变质岩中发育平行区域片理的石英脉和长英质脉体,这些脉体的石英晶体内富含原生的流体包裹体,包括低盐度的含液体ＣＯ２包裹体、液体包裹体、纯ＣＯ２包裹体和高盐度含子矿物包裹体。它们与中生代伟晶岩脉体中包裹体在均一温度、盐度和ＣＯ２密度等方面的明显差异和变质脉体中含液体ＣＯ２包裹体的等容线位置,表明变质脉体石英中的流体包裹体是在变质作用期间被捕获的部分变质流体,进一步证实了脉体是与变质作用同  相似文献   

14.
The Zhaxikang Pb-Zn-Sb deposit is one of the most important deposits in the Southern Tibet metallogenic belt. Based on field geology, petrography, melt- and fluid inclusions and C-H-O isotopes, we describe and discuss the mineralization, alteration, and their possible link with magmatic fluids. Our results show that the Zhaxikang deposit shares many geological and geochemical similarities with typical intermediate-sulfidation (IS) epithermal deposits. The Pb-Zn-Sb mineralization is closely related to Fe-Mn carbonate- and silicic alterations, which formed the outer rim around the greisen in the Cuonadong Dome. Orebodies occur mainly as structurally-controlled veins and breccia dikes, with major minerals include sphalerite, galena, pyrite, arsenopyrite, and Fe-Mn carbonates. Main stage ore-forming fluids were of medium temperature (214–292 °C), low salinity (2.6–5.3 wt.% NaCl eqv.) and CO2-bearing.Melt/fluid inclusions in beryl and quartz from the pegmatite indicate that the primary magmatic fluids were derived from the melt-fluid immiscibility. The magmatic fluids were of low salinity (0.2–7.9 wt.% NaCl eqv.), high temperature (298–457 °C) and CO2-rich, and contained minor CH4, N2, C2H6, C3H8 and C6H6. The presence of Mn-Fe carbonates and daughter gahnite minerals in the beryl-hosted inclusions indicates high Mn, Fe and Zn contents in the parental magma and related magmatic fluids. This implies a genetic link between magmatic fluids and the Pb-Zn-Sb mineralization, as also supported by Ar-Ar dating and H-O-C isotopic evidence. We suggest that the Zhaxikang is best classified as an IS epithermal deposit, and the ore-forming fluids are likely to be magma-derived. Boiling of the magmatic fluids led to high-salinity fluids and metal enrichment. High regional geothermal gradient caused by the thermal doming event may have facilitated long distance transportation of magmatic fluids, and led to the formation of a wide alteration zone and distal Pb-Zn-Sb mineralization. The temperature drop and meteoric water involvement may have precipitated the Pb-Zn-Sn minerals in the distal fault systems.  相似文献   

15.
The newly discovered Jiyuan Cu–Ag–(Pb–Zn–Au) deposit is located in the southern section of the eastern Tianshan orogenic belt, Xinjiang, northwestern China. It is the first documented deposit in the large Aqikekuduke Ag–Cu–Au belt in the eastern Tianshan orogen. Detailed field observations, parageneses, and fluid inclusion studies suggest an epithermal ore genesis for the main Cu–Ag mineralization, accompanied by a complicated hydrothermal alteration history most likely associated with the multi-stage tectonic evolution of the eastern Tianshan. The Jiyuan Cu–Ag ore bodies are located along the EW-striking, south-dipping Aqikekuduke fault and are hosted by Precambrian marble and intercalated siliceous rocks. Early-stage skarn alteration occurred along the contact zone between the marble layers and Early Carboniferous diorite–granodiorite and monzogranite intrusions; the skarns are characterized by diopside–tremolite–andradite–pyrite–(magnetite) assemblages. Local REE-enriched synchysite–rutile–arsenopyrite–(clinochlorite–microcline–albite) assemblages are related to K–Na alteration associated with the monzogranite intrusions and formed under conditions of high temperature (310°C) and high salinity (19.9 wt.% NaCl). Subsequent hydrothermal alteration produced a series of quartz and calcite veins that precipitated from medium- to low-temperature saline fluids. These include early ‘smoky’ quartz veins (190°C; 3.0 wt.% NaCl) that are commonly barren, coarse-grained Cu–Ag mineralized quartz veins (210°C; 2.4 wt.% NaCl), and late-stage unmineralized calcite veins (140°C; 1.1 wt.% NaCl). Tremolite and Ca-rich scapolite veins formed at an interval between early and mineralized quartz veins, indicating a high-temperature, high-salinity (>500°C; 9.5 wt.% NaCl) Ca alteration stage. Fluid mixing may have played an important role during Cu–Ag mineralization and an external low-temperature Ca-rich fluid is inferred to have evolved in the ore-forming system. The Jiyuan auriferous quartz veins possess fluid characteristics distinct from those of the Cu–Ag mineralized quartz veins. CO2-rich fluid inclusions, fluid boiling, and mixing all demonstrate that these auriferous quartz veins acted as hosts for the orogenic-type gold mineralization, a common feature in the Tianshan orogenic belt.  相似文献   

16.
The peculiarities of fluid inclusions; the O and C isotope composition of host rocks, vein minerals, and inclusions; and the S and Pb isotope composition of sulfides allowed us to distinguish two groups of fluids with a similar temperature, salinity, and source of the aqueous part produced upon metagenesis and mobilized during collisional events. Quartz-A precipitates from the CO2–H2O hydrocarbonate–Na fluid with a salinity of 7–10 wt % eq. NaCl at a depth of ～6 km (290–340°C, 1550 bar). Regeneration of quartz (quartz-C), precipitation of quartz-B, and quartz-AB with carbonate and chlorite occurred at a depth from 3.5 to 1.5 km (250–380°C, 1250–900–350 bar) from CO2–CH4–N hydrous sulfate–hydrocarbonate Na–Mg fluids with Cl–, Ca, and K and a salinity of 5–10 wt % eq. NaCl, and a wide variety of impurities. The localization of veins in sinistral shear dislocations and strong heterogeneity in the P–T conditions allow us to explain the formation of fluid-2 by the postcollisional events.  相似文献   

17.
The Heijianshan Fe–Cu (–Au) deposit, located in the Aqishan-Yamansu belt of the Eastern Tianshan (NW China), is hosted in the mafic–intermediate volcanic and mafic–felsic volcaniclastic rocks of the Upper Carboniferous Matoutan Formation. Based on the pervasive alteration, mineral assemblages and crosscutting relationships of veins, six magmatic–hydrothermal stages have been established, including epidote alteration (Stage I), magnetite mineralization (Stage II), pyrite alteration (Stage III), Cu (–Au) mineralization (Stage IV), late veins (Stage V) and supergene alteration (Stage VI). The Stage I epidote–calcite–tourmaline–sericite alteration assemblage indicates a pre-mineralization Ca–Mg alteration event. Stage II Fe and Stage IV Cu (–Au) mineralization stages at Heijianshan can be clearly distinguished from alteration, mineral assemblages, and nature and sources of ore-forming fluids.Homogenization temperatures of primary fluid inclusions in quartz and calcite from Stage I (189–370 °C), II (301–536 °C), III (119–262 °C) and V (46–198 °C) suggest that fluid incursion and mixing probably occurred during Stage I to II and Stage V, respectively. The Stage II magmatic–hydrothermal-derived Fe mineralization fluids were characterized by high temperature (>300 °C), medium–high salinity (21.2–56.0 wt% NaCl equiv.) and being Na–Ca–Mg–Fe-dominated. These fluids were overprinted by the external low temperature (<300 °C), medium–high salinity (19.0–34.7 wt% NaCl equiv.) and Ca–Mg-dominated basinal brines that were responsible for the subsequent pyrite alteration and Cu (–Au) mineralization, as supported by quartz CL images and H–O isotopes. Furthermore, in-situ sulfur isotopes also indicate that the sulfur sources vary in different stages, viz., Stage II (magmatic–hydrothermal), III (basinal brine-related) and IV (magmatic–hydrothermal). Stage II disseminated pyrite has δ34Sfluid values of 1.7–4.3‰, comparable with sulfur from magmatic reservoirs. δ34Sfluid values (24.3–29.3‰) of Stage III Type A pyrite (coexists with hematite) probably indicate external basinal brine involvement, consistent with the analytical results of fluid inclusions. With the basinal brines further interacting with volcanic/volcaniclastic rocks of the Carboniferous Matoutan Formation, Stage III Type B pyrite–chalcopyrite–pyrrhotite assemblage (with low δ34Sfluid values of 4.6–10.0‰) may have formed at low fO2 and temperature (119–262 °C). The continuous basinal brine–volcanic/volcaniclastic rock interactions during the basin inversion (∼325–300 Ma) may have leached sulfur and copper from the rocks, yielding magmatic-like δ34Sfluid values (1.5–4.1‰). Such fluids may have altered pyrite and precipitated chalcopyrite with minor Au in Stage IV. Eventually, the Stage V low temperature (∼160 °C) and low salinity meteoric water may have percolated into the ore-forming fluid system and formed late-hydrothermal veins.The similar alteration and mineralization paragenetic sequences, ore-forming fluid sources and evolution, and tectonic settings of the Heijianshan deposit to the Mesozoic Central Andean IOCG deposits indicate that the former is probably the first identified Paleozoic IOCG-like deposit in the Central Asian Orogenic Belt.  相似文献   

18.
Coexisting melt (MI), fluid-melt (FMI) and fluid (FI) inclusions in quartz from the Oktaybrskaya pegmatite, central Transbaikalia, have been studied and the thermodynamic modeling of PVTX-properties of aqueous orthoboric-acid fluids has been carried out to define the conditions of pocket formation. At room temperature, FMI in early pocket quartz and in quartz from the coarse-grained quartz–oligoclase host pegmatite contain crystalline aggregates and an orthoboric-acid fluid. The portion of FMI in inclusion assemblages decreases and the volume of fluid in inclusions increases from the early to the late growth zones in the pocket quartz. No FMI have been found in the late growth zones. Significant variations of solid/fluid ratios in the neighboring FMI result from heterogeneous entrapment of coexisting melts and fluids by a host mineral. Raman spectroscopy, SEM EDS and EMPA indicate that the crystalline aggregates in FMI are dominated by mica minerals of the boron-rich muscovite–nanpingite CsAl2[AlSi3O10](OH,F)2 series as well as lepidolite. Topaz, quartz, potassium feldspar and several unidentified minerals occur in much lower amounts. Fluid isolations in FMI and FI have similar total salinity (4–8 wt.% NaCl eq.) and H3BO3 contents (12–16 wt.%). The melt inclusions in host-pegmatite quartz homogenize at 570–600 °C. The silicate crystalline aggregates in large inclusions in pocket quartz completely melt at 615 °C. However, even after those inclusions were significantly overheated at 650±10 °C and 2.5 kbar during 24 h they remained non-homogeneous and displayed two types: (i) glass+unmelted crystals and (ii) fluid+glass. The FMI glasses contain 1.94–2.73 wt.% F, 2.51 wt.% B2O3, 3.64–5.20 wt.% Cs2O, 0.54 wt.% Li2O, 0.57 wt.% Ta2O5, 0.10 wt.% Nb2O5, 0.12 wt.% BeO. The H2O content of the glass could exceed 12 wt.%. Such compositions suggest that the residual melts of the latest magmatic stage were strongly enriched in H2O, B, F, Cs and contained elevated concentrations of Li, Be, Ta, and Nb. FMI microthermometry showed that those melts could have crystallized at 615–550 °C.

Crystallization of quartz–feldspar pegmatite matrix leads to the formation of H2O-, B- and F-enriched residual melts and associated fluids (prototypes of pockets). Fluids of different compositions and residual melts of different liquidus–solidus P–T-conditions would form pockets with various internal fluid pressures. During crystallization, those melts release more aqueous fluids resulting in a further increase of the fluid pressure in pockets. A significant overpressure and a possible pressure gradient between the neighboring pockets would induce fracturing of pockets and “fluid explosions”. The fracturing commonly results in the crushing of pocket walls, formation of new fractures connecting adjacent pockets, heterogenization and mixing of pocket fluids. Such newly formed fluids would interact with a primary pegmatite matrix along the fractures and cause autometasomatic alteration, recrystallization, leaching and formation of “primary–secondary” pockets.  相似文献   


19.
本文从江西德兴斑岩铜矿铜厂矿床的流体包裹体研究出发,讨论了矿床成矿物质来源与矿床成因。矿床中流体包裹体分为6类,即富液包裹体、富气包裹体、含石盐多相包裹体、含CO2多相包裹体以及熔体包裹体和熔体-流体包裹体。富气包裹体、含石盐多相包裹体和熔体与熔体-流体包裹体代表了成矿早期岩浆热液的特征。在这些包裹体中发现黄铜矿等金属矿物,表明成矿金属主要源自岩浆。含石盐多相包裹体和富气包裹体与矿体关系不甚密切,但其中所含有的金属矿物特别是黄铜矿,暗示早期来自岩浆的热液流体金属含量较高,形成于大气降水与岩浆热液混合之前。成矿中晚期大气降水流体在冷却和稀释岩浆流体方面对于矿床的形成作出了一定贡献,但是来自围岩的大气降水可能并没有向成矿体系提供大量金属。  相似文献   

20.
江西铜坑嶂斑岩钼矿床成矿流体特征与成矿作用研究   总被引：3，自引：1，他引：2  
江西铜坑嶂钼矿是新近发现的中型斑岩型钼矿,矿体主要分布在白垩纪花岗斑岩体内。根据矿物组合和穿插关系可将该矿床分为三个矿化蚀变阶段:钾硅酸盐化阶段、萤石-黑云母(白云母)-钾长石-辉钼矿阶段和绢云母-石英-碳酸盐阶段。流体包裹体研究表明早阶段成矿流体为富含碱质、挥发份的高氧化性岩浆流体,该成矿流体形成压力较大(约1000bar),温度较高(550～>600℃之间)并发生了沸腾作用,分离出高盐度多相流体包裹体和富气相低盐度包裹体。随着温度的降低(420～440℃之间)和压力的持续释放(320～360bar)成矿流体再次沸腾并导致了钼矿的沉淀。晚阶段与绢云母化等蚀变有关的脉体中大量存在的高盐度(29.58%～44.12%NaCleqv)流体包裹体指示岩浆流体为该蚀变作用的主导,该阶段少数石英脉中富液相包裹体的广泛发育可能与岩浆水和大气降水的混合作用有关。激光拉曼和扫描电镜实验在早阶段流体中检测到Fe3O4、SO2,表明该阶段流体氧化性较高,钾长石化发育,属碱性环境。主成矿阶段流体中还原性气体CH4等的存在,以及辉钼矿与蚀变白云母共生,揭示出该阶段处于相对还原的酸性环境,亦表明氧逸度、pH值变化可能共同导致了钼的沉淀。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号