首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
To enhance the overall efficiency of oil and grease removal in wastewater coated N-doped TiO2 photocatalytic polyscales were fabricated through sol–gel technique. The materials fabricated were characterized using powder X-ray diffraction, Fourier transmission infrared spectroscopy, scanning electron microscopy, and UV–Vis spectroscopy. In order to enhance degradation efficiency of organic pollutant under natural sun light, shifting of absorption range of TiO2 to visible spectrum, various modifications such as surface modification and size optimization were carried out by doping of nitrogen under sol–gel processes. To ease recovery of suspended catalysts from aqueous media, the coated N-doped TiO2 were prepared by decorating photocatalytic particles onto suitable substrates. N-doped TiO2 polyscales with desired functionalities were coated onto the spherical supporting substrates using a binding agent. The photocatalytic treatment studies clearly indicated the considerable level of the oil and grease and other organic pollutants removal from wastewater (up to 85–90 % ± 2) using coated N-doped TiO2 under natural sunlight as an alternative driving energy source. Removal of oil and grease along with other organic pollutants in wastewater using coated N-doped TiO2 polyscales is a versatile, economical, and environmental friendly technique due to the ease of handling and recovery, utilization of natural sunlight which is renewable energy source.  相似文献   

2.
In this study, the photocatalytic degradation of Congo red has been investigated in N-doped TiO2 (N-TiO2) aqueous suspensions under visible light irradiation. Visible light-active N-TiO2 was successfully prepared at three different weight contents (2.5, 5, and 7%) employing sol–gel method. It was able to harvest the visible irradiation with wavelength suitable for activation. X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectrometer, diffused reflectance UV–Vis spectroscopy, nitrogen adsorption Brunauer–Emmert–Teller, Raman spectroscopy, photoluminescence and X-ray photoelectron spectrometer were used to characterize the doped catalyst. The samples had a relatively large specific Brunauer–Emmert–Teller surface areas of about 42 m2 g?1 with average X-ray diffraction crystalline size of 52 nm and showed visible light photocatalytic activity at about 408 nm. The impacts of several operating parameters on the Congo red photodegradation process were examined. Langmuir–Hinshelwood model exhibited pseudo-first-order degradation kinetics. N-TiO2-assisted plausible photodegradation mechanism has been suggested based on the qualitatively detected intermediate compounds.  相似文献   

3.
It is demonstrated that single titanium dioxide (TiO2) has high potential for photodegradation of pollutants. However, it is still far from becoming an effective photocatalyst system, due to issues of adsorption process, separation, as well as dissolution. Therefore, this study highlights the high adsorption capacity, simplified separation, and the promising stability of TiO2(SY) (synthesized via sol–gel method) photocatalyst, fabricated using chitosan–TiO2(SY) and supported by glass substrate (Cs–TiO2(SY)/glass substrate) photocatalysts. Chitosan (Cs), with abundant –R–NH and NH2 groups, promotes the adsorption sites of methyl orange (MO) and OH groups for major attachment to TiO2(SY). Meanwhile, the glass substrate increases stability and assists separation of the photocatalysts. Initially, nano-TiO2(SY) has been characterized using high-resolution transmission electron microscope. Cs–TiO2(SY)/glass substrate was fabricated via dip-coating. The distribution and interface between the photocatalytic components were characterized by Fourier transform infrared absorption spectroscopy, UV–Vis diffuse reflectance spectroscopy, field emission scanning electron microscopy, and energy-dispersive spectrometer. UV–Vis analysis of the multilayer photocatalyst (2, 4, 6, and 8 layers) was further carried out by the adsorption–photodegradation, with MO as model of pollutant. Seventy percent of the total removal of MO via optimized eight layers of photocatalyst was achieved within 1 h of UV irradiation. The adsorption photocatalyst achieved 50 % with no exposure to UV light for 15 min of irradiation. It is concluded that suitable photocatalytic conditions and sample parameters possessing the multilayer photocatalyst of Cs–TiO2(SY) are beneficial toward the adsorption–photodegradation process in wastewater treatment.  相似文献   

4.
The functionalized nano-clay composite adsorbent was prepared, and its properties were characterized using FT-IR, XRD and SEM techniques. The synthesized nano-clay composite was studied with regard to its capacity to remove ibuprofen under different adsorption conditions such as varying pH levels (5–9), initial ibuprofen concentrations (3, 5 and 10 mg L?1), contact time, and the amount of adsorbent (0.125, 0.25, 0.5 and 1 g). In order to evaluate the nanocomposite adsorption capacity, the adsorption results were assessed using nine isotherm models. The results showed that the optimum adsorption pH was 6 and that an increase or decrease in the pH reduced the adsorption capacity. The adsorption process was fast and reached equilibrium after 120 min. The maximum efficacy of ibuprofen removal was approximately 95.2%, with 1 g of adsorbent, 10 mg L?1 initial concentration of ibuprofen, 120 min contact time and pH = 6. The optimal adsorption isotherm models were the Freundlich, Fritz–Schlunder, Redlich–Peterson, Radke–Prausnitz, Sip, Toth and Khan models. In addition, four adsorption kinetic models were employed for adsorption system evaluation under a variety of experimental conditions. The kinetic data illustrated that the process is very fast, and the reaction followed the Elovich kinetic model. Therefore, this nano-clay composite can be used as an effective adsorbent for the removal of ibuprofen from aqueous solutions, such as water and wastewater.  相似文献   

5.
Concentrations of dissolved organic matter (DOM) and ultraviolet/visible light absorbance decrease systematically as groundwater moves through the unsaturated zones overlying aquifers and along flowpaths within aquifers. These changes occur over distances of tens of meters (m) implying rapid removal kinetics of the chromophoric DOM that imparts color to groundwater. A one-compartment input-output model was used to derive a differential equation describing the removal of DOM from the dissolved phase due to the combined effects of biodegradation and sorption. The general solution to the equation was parameterized using a 2-year record of dissolved organic carbon (DOC) concentration changes in groundwater at a long-term observation well. Estimated rates of DOC loss were rapid and ranged from 0.093 to 0.21 micromoles per liter per day (μM d?1), and rate constants for DOC removal ranged from 0.0021 to 0.011 per day (d?1). Applying these removal rate constants to an advective-dispersion model illustrates substantial depletion of DOC over flow-path distances of 200 m or less and in timeframes of 2 years or less. These results explain the low to moderate DOC concentrations (20–75 μM; 0.26–1 mg L?1) and ultraviolet absorption coefficient values (a 254?<?5 m?1) observed in groundwater produced from 59 wells tapping eight different aquifer systems of the United States. The nearly uniform optical clarity of groundwater, therefore, results from similarly rapid DOM-removal kinetics exhibited by geologically and hydrologically dissimilar aquifers.  相似文献   

6.
The current work deals with efficient removal of acetaminophen (AC) from hospital wastewater using electro-Fenton (EF) process. The degradation yield of 99.5% was obtained under optimal experimental conditions, namely 5.75 mg L?1 initial AC concentration, 2.75 pH solution, 3-cm inter-electrode distance, 100 mg L?1 KCl electrolyte, 122.5 µL L?1 H2O2, 8 mA cm?2 current density at equilibrium time of 8 min. Analysis of variance (ANOVA) suggested that the effect of mentioned operating parameters was statistically significant on the AC removal. The low probability amount of P value (P < 0.0001), the Fisher’s F-value of 65.91, and correlation coefficient of the model (R2 = 0.9545) revealed a satisfactory correlation between the experimental and the predicted values of AC removal. The predicted removal efficiency of 99.4% was in satisfactory agreement with the obtained experimental removal efficiency of 98.7%. The AC degradation during the EF followed a first-order kinetic model with rate constants (Kapp) of 0.6718 min?1. Using the ordinary radical scavengers revealed that main mechanism of AC degradation controlled by the hydroxyl free radicals produced throughout the EF process. The excess amount of iron (II) scavenged the active radicals and diminished the concentration of ·OH available to react with AC. The optimum molar ratio of H2O2 to Fe2+ was found to be 2.5. The developed EF process as a promising technique applied for treatment of real samples.  相似文献   

7.
In this work, a low-cost lignocellulosic adsorbent with high biosorption capacity is proposed, suitable for the efficient removal of hexavalent chromium from water and wastewater media. The adsorbent was produced by autohydrolyzing Scots Pine (Pinus Sylvestris) sawdust. The effect of the autohydrolysis conditions, i.e., pretreatment time and temperature, on hexavalent chromium biosorption was investigated using energy-dispersive X-ray spectroscopy (EDS) and UV–visible spectrophotometry. The Freundlich, Langmuir, Sips, Radke-Prausnitz, Modified Radke-Prausnitz, Tóth, UNILAN, Temkin and Dubinin-Radushkevich adsorption capacities and the rate constant values for pseudo-first- and pseudo-second-order kinetics indicated that the autohydrolyzed material exhibits significantly enhanced hexavalent chromium adsorption properties comparing with the untreated sawdust. The Freundlich’s adsorption capacity K F increased from 2.276 to 8.928 (mg g?1)(L mg?1)1/n , and the amount of hexavalent chromium adsorbed at saturation (Langmuir constant q m) increased from 87.4 to 345.9 mg g?1, indicating that autohydrolysis treatment at 240 °C for 50 min optimizes the adsorption behavior of the lignocellulosic material.  相似文献   

8.
The sonochemical degradation of 17β-estradiol (E2) and 17α-ethinylestradiol (EE2) in water and wastewater was investigated at ultrasonic frequency of 850 kHz. The effects of pH, initial concentrations, temperature, power and dissolved organic carbon were examined. The results obtained indicated that the rate of ultrasonic degradation of E2 and EE2 in water and wastewater is influenced by the pH, power, air sparging and the dissolved organic content of the aqueous solutions. Mass degradation rates of E2 and EE2 per kW ranged from 1.7 to 4.0 mg kW?1 at varying process parameters. The degradation process followed the pseudo-second-order kinetic model with rate constant of 1.71 × 10?2 min?1 at 25 °C. The value for activation energy (E a = 15.21 kJ mol?1) obtained from Arrhenius-type plot, indicated that the ultrasonic degradation of steroid hormones is thermodynamically feasible, and does not progress only on radical reactions but other intermediate reaction processes. In wastewater, the higher dissolved organic carbon significantly reduced the effectiveness of degradation of the E2 and EE2 showing that ultrasound treatment will be more effective as a tertiary treatment option in wastewater applications.  相似文献   

9.
Environmental contamination resulting from dyes has become a serious concern for today’s world. The textile effluents are highly colored, and the disposal of these in water bodies causes severe damage to the environment by reducing the solar light penetration which may affect the photosynthetic activity and the aquatic life in water. Further, the high water solubility of dyes also leads to surface and ground water contamination. Thus, in this study, we attempt to develop a cost-effective and eco-friendly method for removal of toxic dyes from aqueous using biosynthesized iron nanoparticles (INPs). Various complimentary instruments such as a thermogravimetric analysis, scanning electron microscopy/energy dispersive X-ray spectrometer, and X-ray diffraction were employed for identification and characterization of INPs. The biosynthesized INPs were applied as a Fenton-like catalyst for decolorization of toxic dyes solution like methylene blue, methyl orange, allura red, brilliant blue, and green S using hydrogen peroxide under solar radiation. The decolorization of the toxic dyes solution using INPs was monitored by UV–visible spectrophotometer, and the data obtained were utilized to evaluate the kinetic rate of the reactions. The kinetic data suggest that the decolorization of all studied toxic dyes solution follows first-order rate with rate constant values in the range of 13.1 × 10?3–17.7 × 10?3 min?1. Therefore, such a clean method employing non-toxic plant extract in INP synthesis and the application of INPs as a Fenton-like catalyst in toxic dyes decolorization can be considered as an alternative technique to the expensive and toxic chemical methods.  相似文献   

10.
This paper reports an experimental degradation study of nineteen multi-class pharmaceutical products present in the influent wastewater arriving at the Daugavgriva wastewater treatment plant. Collected wastewater samples were filtered and irradiated by electron beam and gamma radiation both generated from a 5 MeV linear particle accelerator. The samples were exposed to ten absorbed doses (0.5–25 kGy) produced at high dose rates (600 and 1200 kGy h?1 for accelerated electrons, as well as 22.5 and 37.5 kGy h?1 for gamma radiation). The analysis by a sensitive liquid chromatography–mass spectrometry method indicated that the initial concentrations of pharmaceutical residues were effectively reduced by up to 90–100% in eighty per cent of the cases when samples were exposed to 0.5–5 kGy of electron beam or gamma radiation treatment. Higher doses (>5 kGy) were needed to decompose macrolide antibiotics. The use of electron beam radiation showed some advantages due to the reduced exposure time, thus enabling a more energy efficient treatment resulting in the degradation of pharmaceutical residues comparable to that achieved by gamma irradiation. Microbiological studies indicated the pronounced degradation effect on bacterial contamination of wastewater, which was successfully eliminated upon increasing the radiation, dose up to 7–12 kGy.  相似文献   

11.
There are compelling economic and environmental reasons to remove pesticides from wastewater because they are toxic and carcinogenic. The effectiveness of copper-based metal–organic framework (Cu-BTC) for adsorbing the insecticide 14C-ethion from wastewater has been studied as function of contact time, adsorbent dosage, temperature and pH. 14C-ethion/Cu-BTC isotherms exhibit two plateaus (BET type IV) and are reliably represented by Brunauer–Deming–Deming–Teller and Zhu–Gu models, with deviations of only 1.99 and 3.95%, respectively. The removal curve measured under batch operation is well represented by a pseudo-first-order equation, yielding results equivalent to the theoretical linear driving force model of Glueckauf. At pH 7, 75 mg L?1 ethion concentration, 150 min, 25 °C and 0.425 g L?1 Cu-BTC dose, the sorbent capacity is ca. 122 mg g?1. Moreover, Cu-BTC has a good stability after six adsorptions cycles. Finally, our results disclose the fundamental understanding of the adsorption mechanism: the ethion molecule coordinates to two copper(II) atoms across the metal–organic framework channel via the phosphoryl (P–O) group.  相似文献   

12.
Aqueous phosphate removal by three geomaterials from Ivory Coast was evaluated to determine their potential application as low-cost phosphate adsorbents in wastewater treatment. Batch experiments showed that phosphate uptake strongly depended on pH. Laterite and sandstone dissolution was less pronounced compared to shale. A correlation between concentrations of aqueous cation species released from shale and phosphate uptake was observed. The kinetics were well described using the pseudo-second-order model. Isotherms displayed a saturation level on shale, while phosphate uptake continuously increased for laterite and sandstone. The removal efficiency decreased in the following ranking order: laterite > sandstone > shale. Laterite was also the most efficient adsorbent in column experiments. The high phosphate removal efficiency of laterite (8.3 mg PO4 g?1) was attributed to the presence of superparamagnetic low grain sizes of goethite. Laterite is a particularly promising material for further investigation in wastewater treatment technology such as constructed wetlands.  相似文献   

13.
Nowadays, natural resources are under increasing stress which fosters wastewater reuse planning and emphasizes on the decentralized wastewater treatment. Vermifiltration has been described as a viable alternative to treat domestic and urban wastewater, but few studies have focused on the impact of different filter packings on vermifiltration performance. This study evaluates the effect of vermicompost and sawdust in a single-stage vermifilter (VF) for urban wastewater treatment. After an acclimation period of 45 days, urban wastewater from a combined sewage collection system was applied continuously for 24 h. Earthworm stock density was of 20 g L?1, HRT of 6 h, HLR of 0.89 m3 m?2 day?1 and OLR of 7.38 g BOD5 day?1. System performance was assessed by the removal efficiencies of BOD5, COD, TSS, NH4 +, TN and TP, and fecal coliforms and helminth eggs elimination. Vermicompost (VE) and sawdust (SE) were tested, using an earthworm abundance of 20 g L?1. Treatment efficiencies were 91.3% for BOD5, 87.6% for COD, 98.4% for TSS and 76.5% for NH4 + in VE, and 90.5% for BOD5, 79.7% for COD, 98.4% for TSS and 63.4% for NH4 + in SE. Earthworms contributed to reduce NH4 + and TN removal and to increase NO3 ? concentration. No treatment was able to eliminate fecal coliforms down to guidelines values for wastewater irrigation as helminth eggs were completely eliminated. Single-stage vermifiltration system using both filter packings is inconsistent and cannot meet EU guideline values for discharge in sensitive water bodies and WHO guidelines for irrigation with treated wastewater.  相似文献   

14.
Axenic culture of microalgae Chlorella vulgaris ATCC® 13482 and Scenedesmus obliquus FACHB 417 was used for phycoremediation of primary municipal wastewater. The main aim of this study was to measure the effects of normal air and CO2-augmented air on the removal efficacy of nutrients (ammonia N and phosphate P) from municipal wastewater by the two microalgae. Batch experiments were carried out in cylindrical glass bottles of 1 L working volume at 25 °C and cool fluorescent light of 6500 lux maintaining 14/10 h of light/dark cycle with normal air supplied at 0.2 L min?1 per liter of the liquid for both algal strains for the experimental period. In the next set of experiments, the treatment process was enhanced by using 1, 2 and 5% CO2/air (vol./vol.) supply into microalgal cultures. The enrichment of inlet air with CO2 was found to be beneficial. The maximum removal of 76.3 and 76% COD, 94.2 and 92.6% ammonia, and 94.8 and 93.1% phosphate after a period of 10 days was reported for C. vulgaris and S. obliquus, respectively, with 5% CO2/air supply. Comparing the two microalgae, maximum removal rates of ammonia and phosphate by C. vulgaris were 4.12 and 1.75 mg L?1 day?1, respectively, at 5% CO2/air supply. From kinetic study data, it was found that the specific rates of phosphate utilization (q phsophate) by C. vulgaris and S. obliquus at 5% CO2/air supply were 1.98 and 2.11 day?1, respectively. Scale-up estimation of a reactor removing phosphate (the criteria pollutant) from 50 MLD wastewater influent was also done.  相似文献   

15.
The use of suspensions of nanoparticles of titanium dioxide in photocatalytic degradation of dye solution has disadvantages of inconvenient separation of fine particles for reuse and limited penetration of light for effective degradation. These problems can be minimized by supporting titanium dioxide on various inert supports. The present study involves the preparation of immobilized titanium dioxide films by three different techniques and characterization of the prepared films. The immobilized films of nanocrystals of titanium dioxide were prepared using sol?Cgel technique, polyvinyl alcohol?Cformaldehyde binder and acrylic emulsion. The photocatalytic performance of the prepared films for degradation of amaranth dye has also been evaluated and compared. Combination of photodegradation and adsorption processes induces strong beneficial effects on removal of dyes. Addition of high adsorption capacity activated carbon to photoactive titanium dioxide in photodegradation of dyes improves the efficiency of dye mineralization. The activated carbon has also been immobilized along with titanium dioxide in the present work to examine the dual effect of photodegradation and adsorption in the removal of amaranth. The films formed with the help of polyvinyl alcohol?Cformaldehyde binder showed better dye degradation capabilities.  相似文献   

16.
A denitrifying biocathode in a microbial fuel cell was developed to investigate the replacement of the costly Pt-coated abiotic cathodes for electricity generation. The denitrifying biocathode was sandwiched between the dual-anode systems. The study investigated the performance for simultaneous treatment of wastewater on the anode, biological denitrification on the cathode and the potential recovery of electrical energy. Autotrophic biofilms performed denitrification on the cathode using supplied electrons by the biodegradation of organics on the anode. Graphite granules were used as electrodes for biofilm attachment, and nafion membranes were used as separators between electrodes. The system achieved a volumetric power of 7 ± 0.4 W m?3 net cathodic compartment (NCC) with the simultaneous removal of 229.5 ± 18 mg L?1 COD on anode and 88.9 g m?3 NCC day?1 nitrogen on cathode, respectively. The columbic efficiency for cathodic and anodic reactions was 98.9 ± 0.57 and 23.54 ± 0.87 %, respectively. This is a combined study for domestic wastewater treatment and biological denitrification in a compact MFC reactor. Further optimization of the system is desired to improve its performance and applicability.  相似文献   

17.
This study examined the cell growth rate, lipid contents, lipid productivity, chlorophyll a concentration, and carbon dioxide tolerance of Chlorella vulgaris under various cultivation conditions. The pH, concentration of carbon dioxide in media, and light intensity variables were manipulated to obtain high lipid productivity. The optimum conditions were at pH 7.0, 2,930 lux, and 30 % carbon dioxide. Biomass concentration reached 1,288, 1,130, and 1,083 mg L?1 at 15, 30, and 50 % CO2 after 6 days, respectively, implying that this strain has appreciable tolerance to carbon dioxide. The highest concentration of chlorophyll a occurred at 2,930 lux and decreased with increasing light intensity gradually. The maximum specific growth rate was 3.25 day?1 based on the dry weight and 4.63 day?1 based on the cell number. The lipid content (45.68 %) and lipid productivity (86.03 mg day?1 L?1) obtained in this study are higher than reported values in literatures. Hence, C. vulgaris is a good candidate for subsequent research in biodiesel production under elevated carbon dioxide concentration by microalgae.  相似文献   

18.
Titanium dioxide (TiO2) is an efficient photocatalyst for removing organics in photocatalytic wastewater treatment, but its low photoactivity limits its practical applications in a visible-light-driven chemical reaction. Many efforts have been made in the activation of the visible light absorption property on TiO2 photocatalyst. In this paper, a thorough review of current non-metal doping methods of TiO2 to improve photocatalyst activation under visible light is presented. The focus of this study is on doping non-metals onto TiO2 by several methods to enhance its visible light photoactivity. Besides, the resultant characteristics of the chemical structure, physical structure, and optical properties of the doped photocatalysts are discussed. This review enables a better understanding of current advantages and disadvantages that can arise during the production of non-metal-doped TiO2 and its applications. The annealing and hydrothermal methods are found to be more efficient in preparing doped photocatalysts with respect to time and costs. When choosing between these two approaches, the hydrothermal method can be applied using a variety of precursors, whereas the annealing methods are restricted only to solid form precursors. Thus, the hydrothermal method is a more favorable method of non-metal doping of TiO2. However, studies should focus on the effects of different factors involved in each synthesis/preparation method to determine optimal preparation conditions.  相似文献   

19.
Various industrial facilities including a fish-processing factory, a matchbox factory, a flour mill and a landfill, all in Kisumu City in Kenya, were studied and found to discharge significant amounts of NO2 ?–N, NO3 ?–N, org N, total N and total P into River Kisat and Winam Gulf of Lake Victoria, with  % increases in the mean levels at the outlets of these facilities ranging from 9.6 to 200, 5.9 to 43.5, 9.3 to 96.1, 8.1 to 35.5 and 9.7 to 50.5 %, respectively. The concentrations of NO2 ?–N, NO3 ?–N, NH3–N, org N and total N attributable to these facilities increased by 1,509, 51.1, 112.6, 97.5 and 90.6 %, respectively, at the point of entry into Rive Kisat. The Nyalenda Wastewater Stabilization Ponds reduced the mean levels of NO2 ?–N, NO3 ?–N, org N, total N and T-P by 50, 10.4, 16.6, 7.8 and 30.8 %, respectively, indicating low efficacy of their removal and potential impact on water quality in Lake Victoria. The efficacy of the Kisat wastewater treatment plant was also found to be very low with  % reductions of the analysed nutrients ranging from 2.82 to 41.30 %.  相似文献   

20.
In this study, the feasibility of using a low-cost adsorbent mixture composed of leonardite (L) and clinoptilolite (C) was evaluated by batch adsorption method using different parameters such as mixing ratio, contact time, pH, temperature, and adsorbent amount for the removal of Zn (II) ions from an aqueous solution. The adsorbents were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and Raman spectroscopy. Additionally, leonardite–clinoptilolite mixture was analyzed by scanning electron microscopy coupled with energy dispersive X-ray. The Zn (II) adsorption along with an unprecedented adsorption capacity of 454.55 mg g?1 for unmodified natural sorbents was obtained by mixing leonardite and clinoptilolite (LC) without any pretreatment at a ratio of 3:1, using 0.1 g of sorbent at a pH 6, for 2 h of contact time. The experimental data showed a good fit for the Langmuir isotherm model. The thermodynamic parameters revealed that the present adsorption process was spontaneous and exothermic in nature (25–50 °C). The kinetic results of the adsorption showed that the Zn (II) adsorption onto the LC follows pseudo-second-order model. The resultant LC mixture has an excellent adsorption capacity of a Zn (II) aqueous solution, and data obtained may form the basis for utilization of LC as an unpretreated low-cost adsorbent for treatment of metalliferous industrial wastewater.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号