共查询到20条相似文献，搜索用时 62 毫秒
1.
E. Davesne K. Dideriksen B.C. Christiansen K.B. Ayala-Luis H.C.B. Hansen 《Geochimica et cosmochimica acta》2010,74(22):6451-6467
In a recent study, sulphate-bearing green rust (GRSO4) was shown to incorporate Na+ in its structure (NaFeII6FeIII3(OH)18(SO4)2(s); GRNa,SO4). The compound was synthesised by aerial oxidation of Fe(OH)2(s) in the presence of NaOH. This paper reports on its free energy of formation .Freshly synthesised GRNa,SO4 was titrated with 0.5 M H2SO4 in an inert atmosphere at 25 °C, producing dissolved Fe2+ and magnetite or goethite. Solution concentrations, PHREEQC and the MINTEQ database were used to calculate reaction constants for the reactions:
2.
3.
Göril Möschner Barbara Lothenbach Andrea Ulrich Ruben Kretzschmar 《Geochimica et cosmochimica acta》2008,72(1):1-18
The solubility of Fe-ettringite (Ca6[Fe(OH)6]2(SO4)3 · 26H2O) was measured in a series of precipitation and dissolution experiments at 20 °C and at pH-values between 11.0 and 14.0 using synthesised material. A time-series study showed that equilibrium was reached within 180 days of ageing. After equilibrating, the solid phases were analysed by XRD and TGA while the aqueous solutions were analysed by ICP-OES (calcium, sulphur) and ICP-MS (iron). Fe-ettringite was found to be stable up to pH 13.0. At higher pH-values Fe-monosulphate (Ca4[Fe(OH)6]2(SO4) · 6H2O) and Fe-monocarbonate (Ca4[Fe(OH)6]2(CO3) · 6H2O) are formed. The solubilities of these hydrates at 25 °C are: 相似文献
4.
The solubility of crystalline Mg(OH)2(cr) was determined by measuring the equilibrium H+ concentration in water, 0.01-2.7 m MgCl2, 0.1-5.6 m NaCl, and in mixtures of 0.5 and 5.0 m NaCl containing 0.01-0.05 m MgCl2. In MgCl2 solutions above 2 molal, magnesium hydroxide converted into hydrated magnesium oxychloride. The solid-liquid equilibrium of Mg2(OH)3Cl·4H2O(cr) was studied in 2.1-5.2 m MgCl2. Using known ion interaction Pitzer coefficients for the system Mg-Na-H-OH-Cl-H2O (25°C), the following equilibrium constants at I = 0 are calculated:
5.
Pyromorphite Pb5(PO4)3Cl and mimetite Pb5(AsO4)3Cl are isostructural minerals with apatite. Due to their high environmental stability, they have gained considerable attention as metals sequestration agents in water treatment and contaminated soil remediation. Pyromorphite and mimetite can form a continuous solid solution series in near-Earth surface environments. Precipitation of the end members and intermediate members of the series is likely to occur in the areas where the cost-effective in situ immobilization reclamation method, based on phosphate amendments, is applied. In contrast to the widely studied thermodynamic parameters of pyromorphite and mimetite, knowledge of the thermodynamics of their solid solutions is sparse. To supplement the data, a number of compounds from the pyromorphite-mimetite series were synthesized at room temperature using a method to simulate the conditions in the near-Earth surface environments. Afterwards, batch dissolution and dissolution-recrystallization experiments of seven synthesized precipitates were conducted at 25 °C, pH = 2 and in a 0.05 M KNO3 background electrolyte. The experiments were carried out for a period of 6 (dissolution) and 14 (dissolution-recrystallization) months. A plateau in the [Pb] evolution patterns was used to determine equilibrium. All seven dissolutions were congruent, and the ionic activity products (IAP) of the minerals from the pyromorphite-mimetite solid solution series were calculated based on the dissolution reaction: . The IAPs for pyromorphite and mimetite exhibit a significant difference in values over three orders of magnitude between approximately 10−79 for pyromorphite and approximately 10−76 for mimetite. The series appeared to be ideal, and Lippmann and Roozboom diagrams were used for better understanding of its thermodynamics. The results indicated a strong tendency of pyromorphite to partition into the solid phase in the series, which explains some of the naturally observed phenomena. The improvement of the lattice stability of the mimetite due to isostructural phosphate substitutions in anionic sites was observed. The thermodynamic data reported in this study supplement existing databases used in geochemical modeling. 相似文献
6.
根据X射线衍射(XRD)分析发现: A Fe3(SO4)2(OH)6(A=K+、H3O+)系列铁钒的XRD数据十分相近,难以用XRD区别,需通过能谱(EDS)辅助分析,才能区分此类铁矾。另外,此类铁矾的003和107面网间距d随K+含量增大而增大,且呈一元三次方程的关系;而033和220面网间距d随K+含量增大而减小,呈一元二次方程的关系。对该现象从铁矾晶体结构方面进行解释:K+、H3O+离子位于较大空隙中,且沿着Z轴方向排列,当K+、H3O+离子之间相互替换时,会导致该铁矾晶体结构在Z轴方向有较明显的变化。 相似文献
7.
Claire Rollion-Bard Dominique Blamart Grégory Tricot Jean-Pierre Cuif 《Geochimica et cosmochimica acta》2011,75(4):1003-1012
Dissolved boron in modern seawater occurs in the form of two species, trigonal boric acid B(OH)3 and tetrahedral borate ion . One of the key assumption in the use of boron isotopic compositions of carbonates as pH proxy is that only borate ions, , are incorporated into the carbonate. Here, we investigate the speciation of boron in deep-sea coral microstructures (Lophelia pertusa specimen) by using high field magic angle spinning nuclear magnetic resonance (11B MAS NMR) and electron energy-loss spectroscopy (EELS). We observe both boron coordination species, but in different proportions depending on the coral microstructure, i.e. centres of calcification versus fibres. These results suggest that careful sampling is necessary before performing boron isotopic measurements in deep-sea corals. By combining the proportions of B(OH)3 and determined by NMR and our previous ion microprobe boron isotope measurements, we propose a new equation for the relation between seawater pH and boron isotopic composition in deep-sea corals. 相似文献
8.
Although, the kinetic reactivity of a mineral surface is determined, in part, by the rates of exchange of surface-bound oxygens and protons with bulk solution, there are no elementary rate data for minerals. However, such kinetic measurements can be made on dissolved polynuclear clusters, and here we report lifetimes for protons bound to three oxygen sites on the AlO4Al12(OH)24(H2O)127+ (Al13) molecule, which is a model for aluminum-hydroxide solids in water. Proton lifetimes were measured using 1H NMR at pH ∼ 5 in both aqueous and mixed solvents. The 1H NMR peak for protons on bound waters (η-H2O) lies near 8 ppm in a 2.5:1 mixture of H2O/acetone-d6 and broadens over the temperature range −20 to −5 °C. Extrapolated to 298 K, the lifetime of a proton on a η-H2O is τ298 ∼ 0.0002 s, which is surprisingly close to the lifetime of an oxygen in the η-H2O (∼0.0009 s), but in the same general range as lifetimes for protons on fully protonated monomer ions of trivalent metals (e.g., Al(H2O)63+). The lifetime is reduced somewhat by acid addition, indicating that there is a contribution from the partly deprotonated Al13 molecule in addition to the fully protonated Al13 at self-buffered pH conditions. Proton lifetimes on the two distinct sets of hydroxyls bridging two Al(III) (μ2-OH) differ substantially and are much shorter than the lifetime of an oxygen at these sites. The average lifetimes for hydroxyl protons were measured in a 2:1 mixture of H2O/dmso-d6 over the temperature range 3.7-95.2 °C. The lifetime of a hydrogen on one of the μ2-OH was also measured in D2O. The τ298 values are ∼0.013 and ∼0.2 s in the H2O/dmso-d6 solution and the τ298 value for the μ2-OH detectable in D2O is τ298 ∼ 0.013 s. The 1H NMR peak for the more reactive μ2-OH broadens slightly with acid addition, indicating a contribution from an exchange pathway that involves a proton or hydronium ion. These data indicate that surface protons on minerals will equilibrate with near-surface waters on the diffusional time scale. 相似文献
9.
The kinetics of oxygen exchange between the GeO4Al12(OH)24(OH2)12(aq) molecule and aqueous solutions
Alasdair P. LeeBrian L. Phillips William H. Casey 《Geochimica et cosmochimica acta》2002,66(4):577-587
We report rates of oxygen exchange with bulk solution for an aqueous complex, IVGeO4Al12(OH)24(OH2)128+(aq) (GeAl12), that is similar in structure to both the IVAlO4Al12(OH)24(OH2)127+(aq) (Al13) and IVGaO4Al12(OH)24(OH2)127+(aq) (GaAl12) molecules studied previously. All of these molecules have ε-Keggin-like structures, but in the GeAl12 molecule, occupancy of the central tetrahedral metal site by Ge(IV) results in a molecular charge of +8, rather than +7, as in the Al13 and GaAl12. Rates of exchange between oxygen sites in this molecule and bulk solution were measured over a temperature range of 274.5 to 289.5 K and 2.95 < pH < 4.58 using 17O-NMR.Apparent rate parameters for exchange of the bound water molecules (η-OH2) are kex298 = 200 (±100) s−1, ΔH‡ = 46 (±8) kJ · mol−1, and ΔS‡ = −46 (±24) J · mol−1 K−1 and are similar to those we measured previously for the GaAl12 and Al13 complexes. In contrast to the Al13 and GaAl12 molecules, we observe a small but significant pH dependence on rates of solvolysis that is not yet fully constrained and that indicates a contribution from the partly deprotonated GeAl12 species.The two topologically distinct μ2-OH sites in the GeAl12 molecule exchange at greatly differing rates. The more labile set of μ2-OH sites in the GeAl12 molecule exchange at a rate that is faster than can be measured by the 17O-NMR isotopic-equilibration technique. The second set of μ2-OH sites have rate parameters of kex298 = 6.6 (±0.2) · 10−4 s−1, ΔH‡ = 82 (±2) kJ · mol−1, and ΔS‡ = −29 (±7) J · mol−1 · K−1, corresponding to exchanges ≈40 and ≈1550 times, respectively, more rapid than the less labile μ2-OH sites in the Al13 and GaAl12 molecules. We find evidence of nearly first-order pH dependence on the rate of exchange of this μ2-OH site with bulk solution for the GeAl12 molecule, which contrasts with Al13 and GaAl12 molecules. 相似文献
10.
James D. Prikryl 《Geochimica et cosmochimica acta》2008,72(18):4508-4520
The dissolution and growth of uranophane [Ca(UO2)2(SiO3OH)2·5H2O] have been examined in Ca- and Si-rich test solutions at low temperatures (20.5 ± 2.0 °C) and near-neutral pH (∼6.0). Uranium-bearing experimental solutions undersaturated and supersaturated with uranophane were prepared in matrices of ∼10−2 M CaCl2 and ∼10−3 M SiO2(aq). The experimental solutions were reacted with synthetic uranophane and analyzed periodically over 10 weeks. Interpretation of the aqueous solution data permitted extraction of a solubility constant for the uranophane dissolution reaction and standard state Gibbs free energy of formation for uranophane ( kJ mol−1). 相似文献
11.
The osmotic coefficients of FeCl3 at 25 °C from 0.15 to 1.7 m [Rumyantsev et al., Z. Phys. Chem., 218, 1089-1127, 2004] have been used to determine the Pitzer parameters (β(0), β(1) and C?) for FeCl3. Since the differences in the Pitzer coefficients of rare earths in NaCl and NaClO4 are small, the values of Fe(ClO4)3 have been estimated using the differences between La(ClO4)3 and LaCl3. The Pitzer coefficients for FeCl3 combined with enthalpy and heat capacity data for the rare earths can be used to estimate the activity coefficients of Fe3+ in NaCl over a wide range of temperatures (0 to 50 °C) and ionic strength (0 to 6 m).The activity coefficients of Fe3+ in NaCl and NaClO4 solutions have been used to determine the activity coefficients of Fe(OH)2+ in these solutions from the measured first hydrolysis constants of Fe3+ [Byrne et al., Mar. Chem., 97, 34-48, 2005]. The activity coefficients of , Fe(OH)3 and from 0 to 50 °C have also been determined from the solubility measurements of Fe(III) in NaCl solutions [Liu and Millero, Geochim. Cosmochim Acta, 63, 3487-3497, 1999]. These activity coefficients have been fitted to the Pitzer equations. These results can be used to estimate the speciation of Fe(III) with OH− in natural waters with high concentrations of NaCl from 0 to 50 °C. 相似文献
12.
The rates of Sb(III) oxidation by O2 and H2O2 were determined in homogeneous aqueous solutions. Above pH 10, the oxidation reaction of Sb(III) with O2 was first order with respect to the Sb(III) concentration and inversely proportional to the H+ concentrations at a constant O2 content of 0.22 × 10−3 M. Pseudo-first-order rate coefficients, kobs, ranged from 3.5 × 10−8 s−1 to 2.5 × 10−6 s−1 at pH values between 10.9 and 12.9. The relationship between kobs and pH was:
13.
Zhaosheng Qian Zhenjiang Zhang Wenjing Yang Yingjie Wang 《Geochimica et cosmochimica acta》2009,73(6):1588-1032
Reaction pathways, solvent effects and energy barriers have been investigated for the water exchange of the polyoxocation GaO4Al12(OH)24(H2O)127+ (K-GaAl12) in aqueous solution by means of supermolecule density functional theory calculations. In the proposed reaction pathway, the supermolecular reactant K-GaAl1215H2O first loses a water ligand to form an intermediate with a five-coordinated aluminum atom, and then the incoming water molecule in the second coordination sphere attacks the intermediate with a five-coordinated aluminum atom to produce the reaction product. Our calculated results indicate that the water exchange of K-GaAl12 proceeds via a dissociative mechanism, and that the reverse reaction of Step II is the most favorable dissociative pathway, with a barrier height of 31.3 kJ mol−1. The calculated transition-state rate for the favorable dissociative pathway is much larger than the experimental rate constant, but is close to the data calculated for Al30 by molecular dynamics. The transmission coefficient was also predicted on the basis of both the calculated transition-state rate and the experimental rate. Our calculated results also indicate that both the explicit solvent effect and the bulk solvent effect have obvious effects on the barrier heights of the water exchange reaction of K-GaAl12. By comparison, the water exchange mechanism for K-GaAl12 was found to be more similar to that for mineral surfaces than that for monomeric aluminum species. 相似文献
14.
Aradhna K. Tripati Christopher D. Roberts Robert A. Eagle 《Geochimica et cosmochimica acta》2011,75(10):2582-2610
We use new and published data representing a 20 million long record to discuss the systematics of interpreting planktic foraminiferal B/Ca ratios. B/Ca-based reconstructions of seawater carbonate chemistry and atmospheric pCO2 assume that the incorporation of boron into foraminiferal tests can be empirically described by an apparent partition coefficient, (Hemming and Hanson, 1992). It has also been proposed that there is a species-specific relationship between KD and temperature (Yu et al., 2007). As we discuss, although these relationships may be robust, there remain significant uncertainties over the controls on boron incorporation into foraminifera. It is difficult to be certain that the empirically defined correlation between temperature and KD is not simply a result of covariance of temperature and other hydrographic variables in the ocean, including carbonate system parameters. There is also some evidence that KD may be affected by solution ratios (i.e., pH), or by . In addition, the theoretical basis for the definition of KD and for a temperature control on KD is of debate. We also discuss the sensitivity of pCO2 reconstructions to different KD-temperature calibrations and seawater B/Ca. If a KD-temperature calibration is estimated using ice core pCO2 values between 0 and 200 ka, B/Ca ratios can be used to reasonably approximate atmospheric pCO2 between 200 and 800 ka; however, the absolute values of pCO2 calculated are sensitive to the choice of KD-temperature relationship. For older time periods, the absolute values of pCO2 are also dependent on the evolution of seawater B concentrations. However, we find that over the last 20 Ma, reconstructed changes in declining pCO2 across the Mid-Pleistocene Transition, Pliocene glacial intensification, and the Middle Miocene Climate Transition are supported by the B/Ca record even if a constant coretop KD is used, or different KD-temperature calibrations and models of seawater B evolution are applied to the data. The inferred influence of temperature on KD from coretop data therefore cannot itself explain the structure of a published pCO2 reconstruction (Tripati et al., 2009). We conclude the raw B/Ca data supports a coupling between pCO2 and climate over the past 20 Ma. Finally, we explore possible implications of B/Ca-based pCO2 estimates for the interpretation of other marine pCO2 proxies. 相似文献
15.
The solubility of KFe(CrO4)2·2H2O, a precipitate recently identified in a Cr(VI)-contaminated soil, was studied in dissolution and precipitation experiments. Ten dissolution experiments were conducted at 4–75°C and initial pH values between 0.8 and 1.2 using synthetic KFe(CrO4)2·2H2O. Four precipitation experiments were conducted at 25°C with final pH values between 0.16 and 1.39. The log KSP for the reaction
相似文献
16.
17.
The thermodynamics of dilute Eu-calcite solid solutions formed under widely different pH-pCO2 conditions at T = 25°C and p = 1 bar were investigated using three sets of Eu(III) uptake experiments, two of which were taken from the literature: (a) recrystallization in synthetic cement pore water at pH ∼ 13 and pCO2 ∼ 10−13 bar (this work); (b) coprecipitation in 0.1 M NaClO4 at pH ∼ 6 and pCO2 ∼ 1 bar; (c) coprecipitation in synthetic seawater at pH ∼ 8 and pCO2 ranging from 3 × 10−4 to 0.3 bar.Solid solution formation was modeled using the Gibbs energy minimization (GEM) method. In a first step (“forward” modeling), we tested ideal binary solid solution models between calcite and the Eu end-members Eu2(CO3)3, EuNa(CO3)2, Eu(OH)CO3 or Eu(OH)3, for which solids with independently measured solubility products exist. None of these four binary solid solutions was capable of reproducing all three experimental datasets simultaneously. In a second step (“inverse” modeling), ideal binary solid solutions were constructed between calcite and the candidate Eu end-members EuO(OH), EuH(CO3)2 and EuO(CO3)0.5, for which no independent solubility products are available. For each single data point and each of these end-members, a free energy of formation with inherent activity coefficient term ( = Gαo + RT lnγα) was estimated from “dual thermodynamic” GEM calculations. The statistical mean of was then calculated for each of the three datasets. A specific end-member was considered to be acceptable if a standard deviation of ± 2 kJ mol−1 or less resulted for each single dataset, and if the mean -values calculated for the three datasets coincided. No binary solid solution with any of the seven above mentioned end-members proved to satisfy these criteria.The third step in our analysis involved consideration of ternary solid solutions with CaCO3 as the major end-member and any two of the seven considered Eu trace end-members. It was found that the three datasets can only be reproduced simultaneously with the ternary ideal solid solution EuH(CO3)2 - EuO(OH) - CaCO3, setting = −1773 kJ mol−1 and = −955 kJ mol−1, whereas all other end-member combinations failed. Our results are consistent with time-resolved laser fluorescence data for Cm(III) and Eu(III) indicating that two distinct species are incorporated in calcite: one partially hydrated, the other completely dehydrated. In conclusion, our study shows that substitution of trivalent for divalent cations in carbonate crystal structures is a more complex process than the classical isomorphic divalent-divalent substitution and may need consideration of multicomponent solid solution models. 相似文献
18.
Six natural chloritoid crystals with Fe2+ and Fe3+ contents ranging from 4.15 to 12.81 and from 0.411 to 0.849g-atoms/l, respectively, as determined by means of microprobe and Mössbauer techniques, served as reference material to develop non-destructive microscope-spectrophotometric methods for quantitative Fe2+ – Fe3+ determinations in chloritoids from unpolarized spectra of (001) platelets. Fe2+ concentrations in g-atom/l can be obtained from [ [Fe3+]=C1xD1/t where D1 = log10(I0/I at 28,000 cm-1 and t=crystal thickness in cm; C1 is a conttant that may be influenced somewhat by experimental conditions and is found to be 0.002289 with the experimental set-up used in this study. Fe2+ concentrations in g-atom/l can be obtained from [Fe2+]=C1xD1/D1-C3 with D2=log10(I0/I) at 16,300 cm?1 and constants C4 = 45.36 and C5 = 3.540. Due to the uncertainties in absorbance measurements, D1 and D2 and the thickness measurements, the accuracies are ±0.05 and ±0.15 g-atom/l for [Fe3+] and [Fe2+], respectively. The determinations may be carried out on chloritoid grains in normal thin sections with an areal resolution of ～10 μm. 相似文献
19.
J.A. Tossell 《Geochimica et cosmochimica acta》2006,70(20):5089-5103
Boric acid, B(OH)3, forms complexes in aqueous solution with a number of bidentate O-containing ligands, HL−, where H2L is C2O4H2 (oxalic acid), C3O4H4 (malonic acid), C2H6O2 (ethylene glycol), C6H6O2 (catechol), C10H8O2 (dioxynaphthalene) and C2O3H4 (glycolic acid). McElligott and Byrne [McElligott, S., Byrne, R.H., 1998. Interaction of and in seawater: Formation of . Aquat. Geochem.3, 345-356.] have also found B(OH)3 to form an aqueous complex with . Recently Lemarchand et al. [Lemarchand, E., Schott, J., Gaillardeet, J., 2005. Boron isotopic fractionation related to boron sorption on humic acid and the structure of surface complexes formed. Geochim. Cosmochim. Acta69, 3519-3533] have studied the formation of surface complexes of B(OH)3 on humic acid, determining 11B NMR shifts and fitted values of formation constants, and 11B, 10B isotope fractionations for a number of surface complexation models. Their work helps to clarify both the nature of the interaction of boric acid with the functional groups in humic acid and the nature of some of these coordinating sites on the humic acid. The determination of isotope fractionations may be seen as a form of vibrational spectroscopy, using the fractionating element as a local probe of the vibrational spectrum. We have calculated quantum mechanically the structures, stabilities, vibrational spectra, 11B NMR spectra and 11B,10B isotope fractionations of a number of complexes B(OH)2L− formed by reactions of the type:
20.
The solubility of ZnS(cr) was measured at 100 °C, 150 bars in sulfide solutions as a function of sulfur concentration (m(Stotal) = 0.02-0.15) and acidity (pHt = 2-11). The experiments were conducted using a Ti flow-through hydrothermal reactor enabling the sampling of large volumes of solutions at experimental conditions, with the subsequent concentration and determination of trace quantities of Zn. Prior to the experiments, a long-term in situ conditioning of the solid phase was performed in order to attain the reproducible Zn concentrations (i.e. solubilities). The ZnS(cr) solubility product was monitored in the course of the experiment. The following species were found to account for Zn speciation in solution: Zn2+ (pHt < 3), (pHt 3-4.5), (pHt 5-8), and ZnS(HS)− (pHt > 8) (pHt predominance regions are given for m(Stotal) = 0.1). Solubility data collected in this study at pHt > 3 were combined with the ZnS(cr) solubility product determined at lower pH to yield the following equilibrium constants (t = 100 °C, P = 150 bars):