首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献，搜索用时 93 毫秒
1.
Central Jebilet (Moroccan Variscan Belt) hosts several Cu and Pb–Zn massive sulphide deposits that are associated with a suite of gabbroic and microgranitic, tholeiitic to alkaline, intrusions emplaced 330 Ma ago. The intrusions and ore bodies form structural lineaments within marine Visean shales that are affected by very low to low-grade post-Visean metamorphism and contemporaneous shortening accompanied by the development of conjugate ductile to brittle shear zones. The ductile shear zones are localised in thermally softened aureoles around magmatic intrusions, while brittle deformation is common far from the intrusions. The intrusions have induced a contact metamorphism that reaches the hornblende hornfels facies, and their emplacement was accompanied by hydrothermal activity that leached base metals from the felsic intrusions.The massive sulphide deposits consist of steeply dipping elongate lenses that are located in shear zones 1–1.5 km away from the intrusions. They are dominated by pyrrhotite (up to 90%), sphalerite, galena, chalcopyrite, pyrite and arsenopyrite forming a mylonitic texture. Their wall rocks are altered to syntectonic mineral assemblages similar to those found in the alteration zones associated with the magmatic intrusions. The massive sulphide deposits located near the felsic intrusions are rich in lead and zinc compared to those located near the mafic intrusions, which are copper deposits. These relationships indicate that the whole Central Jebilet hydrothermal system could be described in terms of a lateral secretion of base metals from source zones (i.e. bimodal intrusions) to discharge zones (i.e. the Jebilet sulphide deposits). The metapelites in the contact metamorphic zone around felsic intrusions contain zincian ilmenite that was probably related to interaction of the host rocks with chlorine-rich fluid carrying zinc and other metals leached from the microgranites.  相似文献   

2.
The stringer zones and commonly the interaction zone at the base of the massive sulphide mounds in the Iberian Pyrite Belt contain bismuth and cobalt minerals that are not found in the overlying massive sulphides. These are fairly rare cobalt sulphoarsenides (cobaltite, alloclasite, galucodot) that were formed at the beginning of the massive sulphide genesis, and fairly common bismuth sulphides (bismuthinite, hammarite, wittichenite, cosalite, kobellite, joseite, etc.), including species rare at world scale (nuffieldite, giessenite, jaskolskiite) that were deposited from last stage high-temperature (> 300 °C) copper-bearing fluids containing Bi (Te, Se). The last stage fluids precipitated chalcopyrite containing Cu, Bi, Te, (Se) sulphosalts at the base of the sulphide mound to form a high cupriferous zone. Their interaction with the massive sulphides is reflected by the formation of an exchange zone, a few metres thick, showing chalcopyrite disease textures, at the base of the mound; this zone forms the upper limit of potentially economic copper enrichment and of bismuth minerals. Gold is undoubtedly in part, if not totally, related to this last phase. The bismuth concentrations being equivalent in the massive sulphides and the stringers, the presence of bismuth minerals in the stringer zones results from high-temperature conditions combined with a rarity of galena, which impedes absorption of available Bi. The distribution of these bismuth minerals provides a basic mineralogical zoning in the stringer zone, with a deep, low-aS2 zone containing native bismuth and tellurides and a shallow, higher-aS2 zone in contact with the massive ore sensu stricto and containing complex bismuth sulphides. These results make it possible to distinguish between sulphide veinlets belonging to stockwork zones of massive orebodies and veinlets of an ambiguous nature, and provide mineralogical criteria for the proximity of copper-rich zones. They enrich the very complex mineralogy of the Iberian Pyrite Belt.  相似文献   

3.
Textural evidence, thermobarometry, and geochronology were usedto constrain the pressure-temperature-time (P—T—t)history of the southern portion of the Britt domain in the CentralGneiss Belt, Ontario Grenville Province. Typical metapeliticassemblages are quartz+plagioclase+ biotite + garnet + kyanite alkali feldspar sillimanite rutile ilmenite staurolite gahnite muscovite. Metatonalitic assemblages have quartz+ plagioclase + garnet biotite + hornblende + rutile + ilmenite.Metagabbroic rocks contain plagioclase + garnet + clinopyroxene+ biotite + ilmenite hornblende rutile quartz. Notabletextural features include overgrowths of sillimanite on kyaniteand of spinel on staurolite. The spinel overgrowths can be modeledby the breakdown of staurolite via the reaction Fe-staurolite= hercynite +kyanite + quartz + H2O. The decomposition of stauroliteto her-cynite has a steep dP/dT slope and constrains the lateprograde path of a staurolite metapelite. Garnet—Al2SiO5—plagioclase—quartz(GASP) barometry applied to metapelitic garnets that preservecalcium zoning reveals a pressure decrease from 11 to 6 kbat an assumed temperature of 700 C. Garnet—plagioclase—ilmenite—rutile—quartzand garnet—clinopyroxene—plagioclase—quartzbarometry is in good agreement with pressures obtained withthe GASP barometer. Geochronologic data from garnet, allanite,and monazite in metapelitic rocks give ages that fall into twogroups, 1–4 Ga and 1.1 Ga, suggesting the presence ofat least two metamorphic events in the area. It is most reasonableto assign the 1.4 Ga age to the high-pressure data and the 1.1Ga age to the lower-pressure data. Collectively the P—T—tdata indicate a complex and protracted history rather than asingle cycle of burial and uplift for this part of the GrenvilleProvince.  相似文献   

4.
The second of two periods of regional metamorphism that affectedpelitic rocks near Snow Peak caused complete re-equilibrationof mineral assemblages and resulted in a consistent set of metamorphicisograds. Metamorphic chlorite and biotite occur in the lowestgrade rocks. With increasing grade, garnet, staurolite, andkyanite join the assemblage, resulting in a transition zonecontaining all the above phases. At higher grade, chlorite,and finally staurolite disappear. Mass balance relations at isograds and among minerals of low-varianceassemblages have been modelled by a non-linear least-squaresregression technique. The progressive sequence can be describedin terms of schematic T-XH2O relations among chlorite, biotite,garnet, staurolite, and kyanite at Ptotal above the KFMASH invariantpoint involving those phases. The first appearance of garnetwas the result of an Fe-Mg-Mn continuous reaction. As temperaturerose, the garnet zone assemblage encountered the stauroliteisograd reaction, approximated by the model reaction: 3?0 chlorite + 1?5 garnet + 3?3 muscovite + 05 ilmenite = 1?0staurolite + 3?1 biotite + 1?5 plagioclase + 3?3 quartz + 10?3H2O. The staurolite zone corresponds to buffering along this reactionto the intersection where chlorite, biotite, garnet, staurolite,and kyanite coexist. The transition zone assemblage formed byreaction at this T–X H2O intersection which migrates towardmore H2O-rich fluid composition with progressive reaction. Thenet reaction at the intersection is approximated by the transitionzone reaction: 1?0 chlorite +1?1 muscovite + 0?2 ilmenite = 2?7 kyanite + 1?0biotite + 0?4 albite + 4?2 H2O. Chlorite was commonly the first phase to have been exhaustedand the remaining assemblage was buffered along a staurolite-outreaction, represented by the model reaction: 1?0 staurolite + 3?4 quartz + 0?4 anorthite + 1?4 garnet + 0?1ilmenite + 7?9 kyanite + 2?0 H2O. Consumption of staurolite by this reaction resulted in the highestgrade assemblage, which contains kyanite, garnet, biotite, muscovite,quartz, plagioclase, ilmenite, and graphite.  相似文献   

5.
The main Woodlawn ore lens is a polymetallic, massive sulphide deposit’ with pyrite the major constituent, variable sphalerite, galena and chalcopyrite, and minor arsenopyrite, tetrahedrite‐tennantite, pyrrhotite and electrum. The silicate gangue minerals are chlorite, quartz, talc and sericitic mica. Other mineralization in the vicinity consists of footwall copper ore in chlorite schist and several smaller massive sulphide lenses. The predominant country rocks are felsic volcanics and shales, with abundant quartz, chlorite and mica, and talc in mineralized zones.

An important textural feature of the massive ore is the fine compositional banding. Bands, which vary in thickness from a few tens of micrometres to several millimetres, are produced by variations in the sulphide content. Post‐depositional metomorphism and minor fracturing have only slightly modified this banding.

Apart from the major element constituents—Pb, Zn, Fe, Cu and S—the ore is characterized by significant (100–1000 ppm) values for Ag, As, Cd, Mn, Sb and Sn, and lower (1–100 ppm) values of Au, Bi, Co, Ga, Hg, Mo, Ni, Tl. In and Ge. Variations in the base‐metal sulphide content, the gangue mineralogy, and trace elements, are used to separate the orebody into hanging‐wall and footwall zones. The hanging‐wall zone shows a more variable trace element content, with higher Tl, Sn, Ni, Mn, Ge and Sb, but lower Ag, Cd, and Mo, than the footwall zone.

In general style of mineralization, mineralogy, and chemistry, the Woodlawn deposit resembles other volcanogenic massive sulphide deposits in eastern Australia, in New Brunswick in Canada, and the Kuroko deposits of Japan.  相似文献   

6.
ＭＩＮＩＮＧＨＩＳＴＯＲＹＧｅｏｇｒａｐｈｉｃａｌｙｔｈｅＪｉａｏｄｏｎｇｇｏｌｄｐｒｏｖｉｎｃｅｃｏｖｅｒｓａｌｍｏｓｔｔｈｅｗｈｏｌｅＳｈａｎｄｏｎｇｏｒＪｉａｏｄｏｎｇＰｅｎｉｎｓｕｌａ,ｔｈｅｅａｓｔｅｒｎｈａｌｆｏｆｔｈｅＳｈａｎｄｏｎｇＰ...  相似文献   

7.
Zincian spinel or gahnite [(Zn,Fe,Mg)Al2O4] occurs in metamorphosed sulphide-rich rocks, garnet quartzites, quartz-magnetite rocks, aluminous metasediments, barite-magnetite rocks, quartz veins, and pegmatites associated with the Aggeneys base metal deposits, Namaqualand, South Africa. Zincian spinel in, sulphide-bearing rocks, is considered to have formed predominantly by desulphurization reactions involving a member of the system Fe-S-O and sphalerite with sillimanite or garnet. Gahnite in sulphide-free garnet quartzites, quartz-magnetite rocks and barite-magnetite rocks probably formed from Zn and Al that were hydrothermally derived whereas gahnite in aluminous metasediments was derived from the metamorphism of metalliferous shales, in which Zn may originally have been linked to organic material. Gahnite is Zn-rich in sulphide-bearing rock, but is Fe-rich in sulphide-free garnet quartzites and quartz-magnetite rocks. Although Zn-rich spinels represent guides to ore in the Aggeneys area and elsewhere in the Namaqualand Metamorphic Complex, Fe-rich spinels should not be discounted because Zn-rich and Fe-rich spinels occur within metres of sulphides at Aggeneys.  相似文献   

8.
Volcanic-associated massive sulphide deposits in the Snow Lake area of Manitoba are related to mineralogically and chemically distinct alteration zones. It is generally accepted that these zones represent crosscutting, subconformable or conformable synvolcanic alteration zones, which were coeval with and have been metamorphosed with the massive sulphides. Metamorphism ranges from upper greenschist facies to middle amphibolite facies. Surface lithogeochemical anomalies led to the discovery of small massive sulphide lenses at a vertical depth of 250 m in the Raindrop Lake area, southwest of Snow Lake, Manitoba. Variations in mineral assemblages of middle amphibolite facies alteration zones and analysis of variations in major and trace element chemistry were used to guide deep drilling at Raindrop Lake. The massive sulphide lenses are stratigraphically underlain by a low angle crosscutting “pipe” and a conformable footwall “apron” alteration.The alteration zones are composed of assemblages of garnet, staurolite and chlorite, and, less significantly, biotite, muscovite and kyanite. They are characterized by loss of Na and Ca, and addition of Fe, Mg, Cu and Zn. Mapping the alteration is aided by the application of the metamorphic AFM phase diagram for the appropriate metamorphic facies. Increasing intensity of alteration can be identified by the first appearance of new mineral phases, which are represented on the AFM diagram. These mineral trends coincide with loss of Na and Ca relative to Al, and increased Mg and Fe. Chemical alteration indices ACNK (molecular proportion Al2O3/(CaO + Na2O + K2O) and AI = 100 × [(MgO + K2O)/(MgO + K2O + CaO + Na2O)] combined with Cu and Zn variation helped to quantify the intensity of alteration, despite being insensitive to Fe.The crosscutting pipe is dominantly Fe enriched, with a Cu-enriched core, Zn enriched margins and widespread Na and Ca depletion. Mineralogically it is identified by garnet, staurolite and chlorite and follows an iron and aluminum enrichment trend on the AFM diagram. The conformable alteration zone is characterized by local strong Mg enrichment, extensive Na and Ca depletion and variable Cu and Zn. Mineralogically it is characterized by the presence of chlorite and kyanite and follows a magnesium and aluminum enrichment trend on the AFM diagram.  相似文献   

9.
Microprobe analyses of the minerals from an unusual chloritoid-staurolite-garnet (+ muscovite + quartz + ilmenite) assemblage from the sillimanite (fibrolite) zone of Sini, India are presented and the petrological significance of the paragenesis is discussed. The X Mg in the different minerals from the chloritoid-staurolite-bearing rock varies in the order, muscovite > chlorite > chloritoid > staurolite > garnet > ilmenite, and from the associated sillimanite-bearing schists: muscovite > biotite > staurolite > garnet rim > garnet core > ilmenite. A graphical representation of the mineral compositions in an AFM projection displays a consistent topology if the effects of non-AFM components such as Zn in the staurolite and Mn in the garnet are taken into account. Petrographic and mineralogical data are consistent with a prograde formation of the chloritoid-staurolite-garnet assemblage. It is suggested that the paragenesis has been formed at similar PT conditions to the associated sillimanite (fibrolite)-staurolite-garnet-mica schists. These conditions are estimated to be 600–625°C/6±0.5 Kb.  相似文献   

10.
The volcanogenic Woodlawn Cu‐Pb‐Zn sulphide mineralization occurs within a low‐grade metamorphosed sequence of Middle to Upper Silurian felsic volcanics and fine‐grained sedimentary rocks. Studies on a total of 234 rock samples from diamond drill holes have delineated zones of hydrothermally altered rocks extending more than ～500 m laterally from the main ore lens, at least ～100 m into the foot wall and up to ～200 m into the hanging wall. These altered rocks contain virtually no remnants of primary feldspars and ferromagnesian minerals, and they are variably chloritized, sericitized and silicified. Chlorite and disseminated sulphide minerals are most abundant in zone I, a restricted zone of intense alteration immediately around the main ore lens, whereas sericitic muscovite is most abundant in the relatively extensive zone II, further from the ore. Silicification is also a feature of volcanics well beyond the limits of observed phyllosilicate‐rich alteration zones. Chemical changes within the hydrothermally altered rocks include major enrichment of Fe, Mg, S, Si and H2O, more sporadic enrichment of Ag, Ba, Bi, Cd, Cu, Mn, Pb, Sn and Zn, and major depletion of Ca, Na and Sr. K is depleted in zone I and shows considerable variation, but no overall depletion or enrichment, in zone II.

Lithological, mineralogical and geochemical features around the Woodlawn orebody are basically similar to those associated with the younger, unmetamorphosed Kuroko deposits.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号