共查询到20条相似文献，搜索用时 78 毫秒
1.
新疆克拉玛依地区出露的早古生代蛇绿混杂岩带规模巨大,岩石单元出露齐全。白碱滩地区的地幔橄榄岩相对比较新鲜,单斜辉石、斜方辉石、尖晶石和橄榄石保存完好。研究表明,白碱滩蛇绿岩就位前,地幔岩发生了大于50km的快速隆升,且没有发生部分熔融。百口泉地区发现的地幔岩普遍遭受了改造,辉石多发生了强烈蚀变(透闪石化),但尖晶石和橄榄石保存较好。百口泉地区出露的地幔岩和白碱滩地幔岩的矿物组成基本一致,表明它们属于同一蛇绿混杂岩带。百口泉蛇绿岩剖面的揭露,将该蛇绿混杂岩带的范围向NE方向延伸了35km。 相似文献
2.
雅鲁藏布江缝合带西段普兰蛇绿岩中地幔橄榄岩的岩石学研究 总被引：14，自引：10，他引：4
西藏雅鲁藏布江缝合带西段普兰蛇绿岩以出现面积约600余平方千米的特大型地幔橄榄岩体而引人注目.该地幔橄榄岩以方辉橄榄岩为主体,含有少量的二辉橄榄岩和纯橄榄岩,岩体中另有一些橄榄单斜辉石岩、辉长岩和辉绿岩等侵入体.地幔橄榄岩的主要造岩矿物橄榄石的Fo 90～93,其中呈包裹体的橄榄石的Fo略高,斜方辉石为顽火辉石(En 88～90),单斜辉石主要为顽透辉石和透辉石,以低铝(0.48％～3.96％)和高Mg#(91～96)为特征,铬尖晶石的Cr#值为18～69,其中方辉橄榄岩和二辉橄榄岩中的铬尖晶石属富铝型尖晶石,而纯橄岩中为富铬型尖晶石.橄榄单斜辉石岩的橄榄石Fo值一致较低,平均为88.4,斜方辉石En平均87,单斜辉石以透辉石为主,铬尖晶石的Cr#值为45～69.普兰地幔橄榄岩及橄榄单斜辉石岩都具有相似的稀土元素和微量元素配分模式,表现为LREE相对富集,Eu亏损不明显,微量元素中大离子亲石元素含量较低,部分样品高场强元素亏损,另一些则相对富集,显示地幔橄榄岩具有亏损地幔源区特征,但也具有俯冲带流体的交代特征,表明普兰岩体可能经历了MOR和SSZ两种构造环境,该特征与雅鲁藏布江缝合带东段的罗布莎地幔橄榄岩的特征可以对比. 相似文献
3.
西准噶尔蛇绿混杂岩中的白云石大理岩和石榴角闪岩：早古生代残余洋壳深俯冲的证据 总被引：17，自引：11，他引：6
本文在描述达拉布特和克拉玛依蛇绿岩中四个典型剖面(达拉布特、萨尔托海、白碱滩和百口泉)的基础上,通过研究变白云石大理岩和石榴角闪岩的形成和演化过程,展示西准噶尔蛇绿混杂岩的复杂性。白碱滩白云石大理岩是尖晶石二辉橄榄岩变质反应的产物。变质反应导致单斜辉石转变为白云石+石英+磁铁矿,橄榄石和斜方辉石先转变为蛇纹石+磁铁矿,蛇纹石再转变为白云石+石英+磁铁矿。透辉石+CO2=白云石+石英+磁铁矿以及蛇纹石+CaCO3=白云石+石英 +磁铁矿+H2O这两个变质反应基本同时发生,他们以及石英—柯石英相变关系所限定的P-T空间(660~670℃,26.5~27.5 kbar)代表白云石大理岩的形成温度和压力。白云石大理岩与尖晶石二辉橄榄岩在一个不大的区域共存,说明循环到地球深部的尖晶石二辉橄榄岩(即：白云石大理岩的原岩)折返到地壳浅部后又与蛇绿岩中未俯冲的尖晶石二辉橄榄岩混杂在一起。因此,克拉玛依蛇绿混杂岩代表古俯冲带的位置。变辉长岩和尖晶石二辉橄榄岩中的单斜辉石均发育出溶结构(出溶尖晶石和斜方辉石)。这些出溶结构是蛇绿岩快速上升就位时由于温度和压力突然降低辉石发生分解反应的产物。因此,西准噶尔蛇绿混杂岩中的岩石组合记录着蛇绿岩形成时期、以及之后部分岩块通过俯冲带循环到地幔深处(最大深度~70km)并折返到地壳浅部的全过程。西准噶尔蛇绿混杂岩带是一个多时期、多阶段和多成因岩石的混杂体。 相似文献
4.
5.
泽当蛇绿岩位于雅鲁藏布江缝合带东段,由地幔橄榄岩、辉长辉绿岩、火山岩等组成。地幔橄榄岩主要为方辉橄榄岩和二辉橄榄岩,有少量的铬铁矿化方辉橄榄岩和透镜状纯橄岩。地幔橄榄岩中橄榄石的Fo值为89.6~91.8,属镁橄榄石。斜方辉石为顽火辉石,En端员组分变化于87.8~90.3。单斜辉石En组分变化于44.1~50.0,主要为顽透辉石和透辉石。二辉橄榄岩与方辉橄榄岩铬尖晶石的Cr#为17.0~31.8,为富铝型尖晶石。泽当地幔橄榄岩PGE总量为16.67×10-9~32.59×10-9,与原始地幔相似。矿物化学特征显示泽当二辉橄榄岩属于深海型地幔橄榄岩,方辉橄榄岩属于弧前地幔橄榄岩。尖晶石Cr#、橄榄石Mg#的变化以及高Os含量(3.50×10-9~7.75×10-9)表明泽当地幔橄榄岩经历了部分熔融过程;正斜率的PGE配分模式以及较高的Pd/Ir值(1.09~3.94)表明泽当地幔橄榄岩受到了俯冲带环境下地幔交代作用的改造。泽当地幔橄榄岩矿物学特征与铂族元素地球化学特征显示其形成于MOR环境,后受到SSZ环境的改造。 相似文献
6.
哀牢山南段蛇绿岩中变质橄榄石单元,由方辉橄榄石和二辉橄榄岩组成,前者已强烈蚀变,后者的矿物组成有橄榄石,斜方辉石,单斜辉石及少量尖晶石等,对这些矿物进行了较详细的化学成分分析,橄榄石,斜方辉石的化学分显示,二辉橄榄石为较弱亏损的地幔岩,橄榄石,尖晶石的矿物化学反应,变质橄榄石的原始岩石具有深海橄榄石的特征,单斜辉石,尖晶石的化学特征显示,二辉橄榄石经历过程熔融作用,因此,二辉橄榄石为部分熔融较弱亏 相似文献
7.
青藏东缘马关地幔岩包体的岩石学与矿物学研究 总被引：4，自引：1，他引：4
对青藏东缘新生代马关地区高钾岩系中地幔岩包体的岩石学和矿物化学成分的研究表明:马关地幔岩包体属尖晶石相橄榄岩,岩石类型主要为尖晶石二辉橄榄岩,矿物组合为橄榄石(O l) 斜方辉石(O px) 单斜辉石(Cpx) 尖晶石(Sp l),含极少量金云母和角闪石。橄榄石以贵橄榄石为主,部分为镁橄榄石,其Fo值为89.72~90.47,M g#值为89.75~90.51;斜方辉石的En分子为88.00~89.59,M g#值为90.21~91.16,C r#值为3.31~6.23;单斜辉石主要为透辉石,少量为顽透辉石,成分上表现为高C a(wC aO=18.71%~20.78%)、高A l(wA l2O3=6.00%~7.30%)、高M g#值(89.93~91.57)和低C r#值(5.13~8.74);尖晶石为铬尖晶石,其w(C r2O3)为7.62%~12.88%。矿物化学成分指示:马关尖晶石二辉橄榄岩包体属A型包体,为低度熔融后的大陆地幔橄榄岩。温压估算表明,马关尖晶石相二辉橄榄岩包体的平衡温压分别为900℃~1 150℃和1.29 GPa~2.20 GPa(相当于地下深度45 km~71 km),其上地幔地温曲线与大洋地温曲线一致,显示马关地区岩石圈地幔具有很高的热流值,暗示青藏东缘及邻区于0~16 M a期间有热的软流圈地幔上涌,地幔上涌在构造上的响应即是青藏东缘乃至整个东亚地区区域性岩石圈的东-西向伸展。 相似文献
8.
乌兰敖包基性-超基性岩位于阿拉善北缘兴蒙造山带,由方辉橄榄岩、辉绿岩、辉长岩组成。地球化学分析表明:蛇纹石化橄榄岩为地幔橄榄岩,辉绿岩和辉长岩为拉斑玄武岩系列岩石,均具有与N-MORB相似的微量元素特征,但区别于N-MORB,3种岩石共同组成了蛇绿混杂岩。矿物学分析表明蛇纹石化橄榄岩中橄榄石为地幔橄榄岩中镁橄榄石(Fo=91.10~91.81),铬铁矿为铬尖晶石,具有高的Cr~#和Mg~#值分别为61.04~64.44、50.40~56.37)。单斜辉石出现在方辉橄榄岩、辉长岩及辉绿岩中,而斜方辉石只出现在方辉橄榄岩中,其中方辉橄榄岩中单斜辉石为顽透辉石,辉长岩中为普通辉石,而辉长岩中为次透辉石、贫钙普通辉石、普通辉石,斜方辉石均为斜顽辉石。辉长岩U-Pb年龄为344.5±1.5 Ma,表明该蛇绿混杂岩形成于早石炭世。地球化学及矿物学特征表明乌兰敖包蛇绿岩形成于俯冲早期的弧前环境中,属于SSZ型蛇绿岩。蛇绿混杂岩成因提供铬铁矿形成的有利条件,因此应围绕铬铁矿进行找矿工作。 相似文献
9.
雅鲁藏布江缝合带白朗县白岗尖晶石—石榴子石相二辉橄榄岩的相界反应及其意义 总被引：3，自引：0，他引：3
西藏白朗县白岗村蛇绿混杂岩中有一罕见的尖晶石石榴子石二辉橄榄岩小岩块,被松软的蛇纹岩化尖晶石二辉橄榄岩包裹其中。岩块中发育有碎基单斜辉石、斜方辉石中出溶单斜辉石、切过出溶单斜辉石的贯入单斜辉石和外来碎粒单斜辉石及钙质辉石+铬尖晶石→钙铁石榴子石相界反应。同时,在岩块和包壳岩石的橄榄石中出现针状硅镁石出溶物。计算这些矿物的温度压力表明,它们的温度压力都处于>800℃,>1.8GPa以上的地幔石榴子石域超高压环境,而且,经历过一个上升→俯冲→上升的"N"字形历程。 相似文献
10.
西藏雅鲁藏布江缝合带东段泽当地幔橄榄岩特征及其意义 总被引：1，自引：1，他引：0
泽当岩体位于雅鲁藏布江缝合带东段,主要由地幔橄榄岩、辉长辉绿岩和基性火山岩等组成。地幔橄榄岩主要为方辉橄榄岩和二辉橄榄岩,有少量透镜状纯橄岩。地幔橄榄岩经历了强烈的塑性变形作用。地幔橄榄岩中橄榄石的Fo值为89.6~91.8,属镁橄榄石;斜方辉石为顽火辉石,En 87.8~90.3;单斜辉石En 44.1~50.0,主要为顽透辉石和透辉石。铬尖晶石的Cr#值(=100×Cr/(Cr+Al))为17.0~93.6,其中,二辉橄榄岩和方辉橄榄岩中的铬尖晶石为富铝型尖晶石,纯橄岩中的铬尖晶石Cr#最高,为富铬型尖晶石。地幔橄榄岩的部分熔融程度为17%~34%,表明泽当地幔橄榄岩可能经历了多阶段的过程。亏损的主量元素组成和低于原始地幔的稀土元素含量(0.15×10-6~0.61×10-6)指示泽当地幔橄榄岩为经历过部分熔融和熔体抽取的亏损残余地幔岩石。REE配分型式为中稀土亏损的"V"型或"U"型,原始地幔标准化元素比值(La/Sm)N为0.5~8.0,表明泽当地幔橄榄岩经历过交代作用。矿物化学与地球化学数据表明泽当地幔橄榄岩形成于MOR环境,后受到SSZ环境的改造。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献