共查询到20条相似文献，搜索用时 46 毫秒
1.
东准噶尔北缘两类钙碱性花岗岩特征及其构造-成矿意义 总被引：1，自引：0，他引：1
依据前人对东准噶尔地区花岗岩类年代学和地球化学研究,将东准噶尔北缘钙碱性花岗岩划分为两类：一类为俯冲钙碱性花岗岩;另一类为后碰撞高钾钙碱性花岗岩。岩石地球化学对比研究发现,两类钙碱性花岗岩存在系统差异,兼具有相似性。岩石地球化学特点差异表现为俯冲钙碱性花岗岩,显示亲岛弧岩浆性,后碰撞高钾钙碱性花岗岩具有陆内后碰撞深成岩浆的特点。两者之间的相似性表明,造山带内花岗岩类由俯冲钙碱性→后碰撞高钾钙碱性系列演化是由于俯冲造山向碰撞造山快速转化、空间上位于同一造山带内,源区岩浆有双重性的特点。钙碱性花岗岩产出的构造环境具有多样性,成岩过程受造山带不同演化阶段相应构造背景制约,洋陆俯冲的岛弧环境和陆内造山的后碰撞环境分别是俯冲钙碱性和后碰撞高钾钙碱性花岗岩形成的构造背景。埃达克质岩浆亲和性显示俯冲钙碱性花岗岩与部分后碰撞高钾钙碱性花岗岩均有形成不同背景（岛弧和后碰撞）斑岩型矿床的潜力。后碰撞高钾钙碱性花岗岩与IOCG型矿床的空间联系,表明造山带伸展背景的后碰撞环境,也可能是IOCG型矿床产出的构造背景。两类钙碱性花岗岩构造背景的差异可能初步印证了具有岛弧斑岩型矿床的哈腊苏-卡拉先格尔和IOCG型矿床的老山口南东一带成矿环境的差异。 相似文献
2.
《地质科技情报》2016,(3)
北秦岭东部及华北板块南缘由多条断裂以及韧性剪切带分割成不同块体,这些块体中分布着不同时代不同类型的花岗岩。在前人关于该区花岗岩研究的基础上,详细归纳和分析了研究区古生代以来花岗岩体的时空分布、地球化学特征及其构造属性。研究表明这些花岗岩可分为3个时期:加里东期、印支期和燕山期。加里东期花岗岩为准铝质到弱过铝质的钙碱性系列,具大陆弧花岗岩特征;印支期花岗岩为高钾钙碱性系列,地球化学特征与后碰撞阶段花岗岩较为相似;燕山期花岗岩表现为从早到晚由高Sr低Y型埃达克质岩向A型花岗岩转变为特征。本区花岗岩的这种时空分布特征暗示了该区构造演化经历了加里东期俯冲造山、印支期碰撞造山以及燕山期陆内构造等演化阶段。 相似文献
3.
4.
三江特提斯叠加成矿作用样式及过程 总被引：78，自引：64，他引：14
三江地区经历了特提斯洋的多期洋-陆俯冲和新生代以来的陆-陆碰撞;成矿主要集中在大洋生长与俯冲造山阶段以及碰撞造山主碰撞向晚碰撞的转换阶段,控制了区域喜马拉雅期斑岩型铜金矿带、沉积岩容矿型铅锌多金属矿带与造山型金矿带等。在不同时期构造环境作用下,在矿田与矿床范围内形成了复杂多样的叠加成矿作用。叠加成矿作用可划分为3种类型及9种方式:(1)VMS-岩浆热液叠加型。包括喜马拉雅期岩浆热液型矿体叠加海西期-燕山期"VMS型"矿体(老厂式Pb-Zn-Mo矿床和鲁春式Cu-Pb-Zn矿床),印支/燕山期岩浆热液型矿体叠加海西期VMS型矿体的羊拉式Cu-Mo-Pb-Zn矿床;(2)沉积-热液叠加型。包括喜马拉雅期岩浆热液型矿体叠加燕山期沉积矿源层的白秧坪式Cu-Pb-Zn矿床,喜马拉雅期建造热液型Ge矿体叠加沉积煤层的大寨/中寨式Ge矿床,燕山期岩浆热液叠加加里东期分水岭式Fe-Cu矿床;(3)多期热液叠加型。主要为喜马拉雅期与印支期两期叠加成矿作用的老王寨床式Au矿床,燕山期叠加印支期普朗-红山式Cu矿床,喜马拉雅期多期次叠加的金满Cu矿床。叠加成矿作用增加矿床的资源储量,丰富了矿种类型;但是现在仅有部分年代学与矿田-矿床尺度地质现象的某些证据,叠加矿床的矿体-矿石结构特征、形成条件与地球化学及矿物学约束仍有待于进一步研究。 相似文献
5.
义敦岛弧是喜马拉雅巨型造山带中的一个复合造山带,它经历了印支期洋壳俯冲造山、燕山湖弧-陆碰撞和喜马拉雅期陆内走滑作用诸演化历史。可能由于洋壳板片俯冲角度不同,义敦晚三叠世古岛弧带(206～237 Ma)南北两段具有不同的发育历史,北段昌台弧以发育孤间裂谷为特色,具张性弧特征,发育扩张环境流体聚敛成矿系统,形成VMS型Zn-Pb-Cu矿床和浅成低温热液型Ag-Au-Hg矿床;南段中甸弧不发育弧后盆地,但广泛发育钙碱性弧火山岩-玢岩-斑岩杂岩系和挤压环境岩浆-流体成矿系统,形成斑岩型-夕卡岩型铜多金属矿床。在三叠纪-侏罗纪之交的弧-陆碰撞作用中,早期大陆板片俯冲形成同碰撞花岗岩带(约200 Ma),晚期造山后伸展作用,形成A型花岗岩带(75～138 Ma),伴随扬子大陆板片俯冲而发生的强烈剪切和推覆,在甘孜-理塘蛇绿混杂带发育挤压剪切环境流体聚敛成矿系统,形成剪切带型金矿。伴随造山后伸展和A型花岗岩侵位,发育伸张环境岩浆-流体聚敛成矿系统,主要形成夕卡岩型锡矿和构造破碎带热浪脉型银多金属矿床。印度-亚洲大陆碰撞在义敦造山带主要表现为陆内走滑作用,并控制碱性花岗岩和花岗斑岩的发育(50～30 Ma),伴随斑岩型金矿的形成。 相似文献
6.
《新疆地质》2017,(4)
通过对天山造山带古生代侵入岩岩石类型、岩石地球化学特征及年代学研究,初步厘定不同构造带侵入岩浆序列及形成构造环境。天山地区古生代侵入岩主要包括奥陶—志留纪俯冲期钙碱性花岗岩、泥盆纪后碰撞型正长花岗岩、石炭纪中早期俯冲型钙碱性花岗岩、石炭纪晚期后碰撞型正长花岗岩、石炭纪末后碰撞型镁铁-超镁铁质岩、二叠纪早期后造山型碱性花岗岩及洋壳残片等。俯冲期侵入岩主要为花岗闪长岩-石英二长闪长岩-石英闪长岩组合;同碰撞期为花岗闪长岩-二长花岗岩组合;后碰撞期为组成花岗岩-二长花岗岩组合;后造山期为正长花岗岩-碱性花岗岩组合。认为该地区古生代侵入岩与Terskey洋、北天山洋、南天山洋等洋盆演化密切相关,并建立了天山地区古生代构造演化模式图。 相似文献
7.
花岗岩构造岩浆组合 总被引：5，自引：0，他引：5
花岗岩的构造岩浆组合主要反映花岗岩的岩浆类型与大地构造环境之间的成因联系。从全球范围来看,结合中国的地质实际,花岗岩的构造岩浆组合可以区分为5种主要类型：（1） 洋壳俯冲消减型,如太平洋两岸的大陆边缘;（2）陆—陆碰撞型,如喜马拉雅—冈底斯碰撞造山带;（3）陆缘伸展型,如中国东南部伸展型大陆边缘、北美西部盆岭省;（4）陆内断裂拗陷型,如长江中下游断裂拗陷、钱塘江—信江断裂拗陷;（5）裂谷型,如东非裂谷、攀西裂谷。通过钙碱指数（CA）和铝饱和指数（ASI）的计算,可以大体获知花岗岩的岩浆类型。造山带花岗岩的时空演变规律是：俯冲型→碰撞型→伸展型。亦可表述为：前碰撞花岗岩→同碰撞花岗岩→后碰撞花岗岩。但不能一概而论,只有在对不同造山带花岗岩的具体情况进行认真分析对比之后,才能对花岗岩的构造岩浆组合作出判断。 相似文献
8.
滇西羊拉地区构造——岩浆——成矿作用分析 总被引：7，自引：0，他引：7
金沙江缝合带的洋－陆转换过程（洋盆扩张、洋壳俯冲、洋盆闭合）,在羊拉地区引发了三期构造－岩浆事件,分别形成海西期裂谷洋盆洋脊－洋岛型火山岩、印支期陆缘弧同熔型花岗岩、燕山早期同造山碰撞型花岗岩及与之相对应的海底喷流－热水沉积型、矽卡岩型和斑岩型矿床。 相似文献
9.
大兴安岭地区发育强烈的中生代岩浆作用,一直以来是本地区地质构造研究的热点,但关于晚侏罗世花岗岩的研究报道较少。文中根据三件花岗岩样品的锆石U-Pb LA-ICP-MS测年结果获得的(158.5±1.6) Ma、(156.1±0.59) Ma和(154.1±1.1) Ma年龄结果将兴安地块东北部原定为早中生代的花岗岩形成时间厘定为晚侏罗世。该晚侏罗世花岗岩以中粗粒花岗闪长岩—二长花岗岩为岩石组合,岩石具富硅碱、高钾、过铝、低铁钛镁等特点,属于过铝质高钾钙碱性系列,富集LREE,亏损HREE、Y和HFSE,高Sr,低Yb,高La/Yb、Sr/Y比值,具有“C型”埃达克质岩的特点。该花岗岩的形成与蒙古鄂霍茨克洋闭合引起的陆陆碰撞造山作用密切相关,岩浆源于造山带加厚的下地壳底部基性岩的部分熔融,岩浆形成演化中有富铝地壳物质的加入。该系列花岗岩与紧邻的早、中侏罗世TTG花岗岩反映侏罗纪蒙古鄂霍茨克洋经历了由洋壳俯冲到陆陆碰撞的构造演化。 相似文献
10.
云南羊拉地区铜矿成矿系列 总被引：7，自引：0，他引：7
金沙江缝合带的洋-陆转换(洋盆扩张、洋壳俯冲、洋盆闭合)作用,在羊拉地区引发了3期构造-岩浆事件,分别形成海西期裂谷洋盆洋脊-洋岛型火山岩、印支期陆缘弧同熔型花岗岩和燕山期同造山碰撞型花岗斑岩,与其对应的成矿系列为:海西期海底喷流-热水沉积型铜矿床、印支期接触交代矽卡岩型铜矿床和燕山早期斑岩型铜矿床. 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献