共查询到20条相似文献，搜索用时 253 毫秒
1.
J. McL. Miller D. Phillips C. J. L. Wilson L. J. Dugdale 《Australian Journal of Earth Sciences》2013,60(6):921-940
40Ar/39Ar age data from the boundary between the Delamerian and Lachlan Fold Belts identify the Moornambool Metamorphic Complex as a Cambrian metamorphic belt in the western Stawell Zone of the Palaeozoic Tasmanide System of southeastern Australia. A reworked orogenic zone exists between the Lachlan and Delamerian Fold Belts that contains the eastern section of the Cambrian Delamerian Fold Belt and the western limit of orogenesis associated with the formation of an Ordovician to Silurian accretionary wedge (Lachlan Fold Belt). Delamerian thrusting is craton-verging and occurred at the same time as the final consolidation of Gondwana. 40Ar/39Ar age data indicate rapid cooling of the Moornambool Metamorphic Complex at about 500 Ma at a rate of 20 – 30°C per million years, temporally associated with calc-alkaline volcanism followed by clastic sedimentation. Extension in the overriding plate of a subduction zone is interpreted to have exhumed the metamorphic rocks within the Moornambool Metamorphic Complex. The Delamerian system varies from a high geothermal gradient with syntectonic plutonism in the west to lower geothermal gradients in the east (no syntectonic plutonism). This metamorphic zonation is consistent with a west-dipping subduction zone. Contrary to some previous models involving a reversal in subduction polarity, the Ross and Delamerian systems of Antarctica and Australia are inferred to reflect deformation processes associated with a Cambrian subduction zone that dipped towards the Gondwana supercontinent. Western Lachlan Fold Belt orogenesis occurred about 40 million years after the Delamerian Orogeny and deformed older, colder, and denser oceanic crust, with metamorphism indicative of a low geothermal gradient. This orogenesis closed a marginal ocean basin by west-directed underthrusting of oceanic crust that produced an accretionary wedge with west-dipping faults that verge away from the major craton. The western Lachlan Fold Belt was not associated with arc-related volcanism and plutonism occurred 40 – 60 million years after initial deformation. The revised orogenic boundaries have implications for the location of world-class 440 Ma orogenic gold deposits. The structural complexity of the 440 Ma Stawell gold deposit reflects its location in a reworked part of the Cambrian Delamerian Fold Belt, while the structurally simpler 440 Ma Bendigo deposit is hosted by younger Ordovician turbidites solely deformed by Lachlan orogenesis. 相似文献
2.
R. A. Cayley D. H. Taylor A. H. M. VandenBerg D. H. Moore 《Australian Journal of Earth Sciences》2013,60(2):225-254
Aeromagnetic and field data suggest that meta‐igneous rocks exposed on the south coast of central Victoria at Waratah Bay, Phillip Island, Barrabool Hills and inland near Licola, are continuous—beneath Bass Strait—with Proterozoic/Cambrian igneous rocks in King Island and Tasmania. This correlation is supported by a pre‐Early Ordovician unconformity above gabbro protomylonite at Waratah Bay, age equivalent to the Tasmanian Tyennan unconformity. Cambrian volcanics at Licola and unusual features of the Melbourne Zone sequence indicate that Tyennan continental crust extends north as basement to the central Victorian portion of the Lachlan Fold Belt. In contrast, adjacent parts of the Lachlan Fold Belt in Victoria contain conformable sea‐floor sequences that span the Early Cambrian to Late Ordovician, with no evidence of either Cambrian deformation or underlying continental basement. The block of Tyennan continental crust beneath central Victoria—the Selwyn Block—is fundamentally different, and has influenced temporal and spatial patterns of sedimentation, deformation, metamorphism and plutonism. Palaeogeographical reconstructions suggest that the block was a submarine plateau that lay outboard of the Australian craton, upon which a condensed Ordovician sequence was deposited. The sequence above the Selwyn Block unconformity at Waratah Bay is similar to widespread post‐Tyennan sediments in western Tasmania. During Late Ordovician and Early Silurian deformation, the Selwyn Block protected much of the overlying sedimentary sequence. Instead, shortening was focused into the Stawell and Bendigo Zones to the west. These zones were sandwiched between the Selwyn Block and the Australian craton in a ‘vice’ scenario reminiscent of some Appalachian orogenic events. The region above the Selwyn Block was downwarped adjacent to the overthrust Bendigo Zone as a foreland deep, into which a conformable clastic wedge of sediment was deposited in Late Ordovician to Devonian time, prior to final Middle Devonian deformation. The Selwyn Block includes the Cambrian calc‐alkaline Licola and Jamieson Volcanics that are correlated with the Tasmanian Mt Read Volcanics. In Victoria, these form a basement high controlling the unusual down‐cutting thrusts in the overlying Melbourne Zone and explaining the major structural vergence reversal between the Melbourne and Tabberabbera Zones. The Selwyn Block has exerted some control on the timing, chemistry and distribution of post‐orogenic granites, and on central Victorian gold mineralisation. Reactivated faults in the block influenced deposition, and continue to control the deformation of the portions of the Otway and Gippsland Basins that lie above it. 相似文献
3.
We investigate the thermo-mechanical properties beneath the young orogenic belt of Taiwan by constructing a shear strength profile from a vertical stratified rheological structure. The stratified rheological structure is estimated based on the recently developed thermal structure and its likely composition. Subduction–collision in the young orogenic belts and the thick accretionary wedge make a significant contribution to the growth of sialic crust in the hinterland. The sialic bulk crust not only results in a low seismic velocity but also produces weak crust in the hinterland. The earthquake depth–frequency distribution in the foreland and hinterland correlates very well with the regimes of the brittle/ductile transition revealed in the strength profile. Our results show that the observed two-layer seismicity in the foreland is due to a moderate geotherm and an intermediate mafic bulk composition; while single-layer seismicity in the hinterland is due to its felsic bulk composition. In the foreland, the mechanically strong crust (MSC) and the mechanically strong lithosphere (MSL) coincide with frequent seismicity. The shallow MSC in the hinterland is consistent with the 20- to 25-km seismicity occurring there. The total lithospheric integrated strength (LIS) in the hinterland is only about half of that in the foreland, suggesting a weak lower crust and lithosphere mantle in the hinterland. The results confirm that the earthquake cutoff depth is a proxy for temperature. The calculated decrease of effective elastic thickness (EET) from the orogenic margin (foreland) to the center (hinterland) is consistent with the results of flexure modeling in most orogenic belts. Due to the weak LIS in the hinterland, crustal thinning and rifting may occur in the future. Our results, thus, suggest that the mechanical structure is also closely related to the composition and is not directly reflected in the thermal structure. 相似文献
4.
The Lachlan Fold Belt is a Middle Palaeozoic orogenic belt in which terminal tectogenesis occurred during the Early Carboniferous (Kanimblan Orogeny). This fold belt went through a complicated tectonic history and developed from the stratotectonic Lachlan Marginal Mobile Zone (or geosyncline of other authors). The Lachlan Fold Belt can be divided into structural zones which are characterized by varying tectonic styles. Zones of intensive deformation alternate with less deformed zones.The formation of the Lachlan Fold Belt may be viewed in terms of a series of tensional and compressional deformational events with the major compressional or tensional stress maintaining an approximate east—west orientation (relative to the grain of the fold belt) for the life of the Lachlan Marginal Mobile Zone. 相似文献
5.
In the Lachlan Fold Belt of southeastern Australia, major orogenic gold and porphyry gold–copper deposits formed simultaneously
within distinct tectonic settings during a very short time interval at ca. 440 Ma. The driving mechanism that controlled the
temporal coincidence of these deposits remains largely unexplained. A review of contemporaneous metallogenic, tectonic, magmatic
and sedimentological events in central and eastern Australia reveals that a change in subduction dynamics along the Australian
sector of the Early Palaeozoic circum–Gondwana mega-subduction system could have influenced lithospheric stress conditions
far inboard of the subduction margin. The magnitude of ore formation and the spatial extent of related events are proposed
in this paper to have been controlled by the interplay of mantle processes and lithospheric changes that followed slab break-off
along a portion of the mega-subduction system surrounding Gondwana at that time. Slab break-off after subduction lock-up caused
mantle upwelling that, in turn, provided an instantaneous heat supply for magmatic and hydrothermal events. Coincident reorganisation
of lithospheric stress conditions far inboard of the proto-Pacific margin of Australia controlled reactivation of deep-lithospheric
fault structures. These fault systems provided a pathway for fluids and heat fuelled by mantle upwelling into the upper lithosphere
and caused the deposition of ~440 Ma gold deposits in the Lachlan Fold Belt, as well as a range of metallogenic, tectonic
and sedimentary changes elsewhere in central and eastern Australia. 相似文献
6.
Tectonic Framework and Deep Structure of South China and Their Constraint to Oil‐Gas Field Distribution 总被引：4，自引：3，他引：1
South China could be divided into one stable craton, the Yangtze Craton (YzC), and several orogenic belts in the surrounding region, that is the Triassic Qinling-Dabie Orogenic Belt (QDOB) in the north, the Songpan-Garzê Orogenic Belt (SGOB) in the northwest, the Mesozoic-Cenozoic Three-river Orogenic Belt (TOB) in the west, the Youjiang Orogenic Belt (YOB) in the southwest, the Middle Paleozoic Huanan Orogenic Belt (HOB) in the southeast, and the Mesozoic-Cenozoic Maritime Orogenic Belt (MOB) along the coast. Seismic tomographic images reveal that the Moho depth is deeper than 40 km and the lithosphere is about 210 km thick beneath the YzC. The SGOB is characterized by thick crust (>40 km) and thin lithosphere (<150 km). The HOB, YOB and MOB have a thin crust (<40 km) and thin lithosphere (<150 km). Terrestrial heat flow survey revealed a distribution pattern with a low heat flow region in the eastern YzC and western HOB and two high heat flow regions in the TOB and MOB respectively. Such a “high-low-high” heat flow distribution pattern could have resulted from Cenozoic asthenosphere upwelling. All oil-gas fields are concentrated in the central part of the YzC. Remnant oil pools have been discovered along the southern margin of the YzC and its adjacent orogenic belts. From a viewpoint of geological and geophysical structure, regions in South China with thick lithosphere and low heat flow value, as well as weak deformation, might be the ideal region for further petroleum exploration. 相似文献
7.
WANG Qingchen LIU Jinsong DU Zhili CAI Liguo State Key Laboratory of Lithospheric Evolution 《《地质学报》英文版》2009,83(1)
South China could be divided into one stable craton,the Yangtze Craton (YzC),and several orogenic belts in the surrounding region,that is the Triassic Qinling-Dabie Orogenic Belt (QDOB) in the north,the Songpan-Garz(?) Orogenic Belt (SGOB) in the northwest,the Mesozoic-Cenozoic Three- river Orogenic Belt (TOB) in the west,the Youjiang Orogenic Belt (YOB) in the southwest,the Middle Paleozoic Huanan Orogenic Belt (HOB) in the southeast,and the Mesozoic-Cenozoic Maritime Orogenic Belt (MOB) along the coast... 相似文献
8.
The Canadian Cordillera is separable into two major northerly trending tectonic units—the Pacific Orogen and the Columbian Orogen, with the latter further separated into the Omineca Crystalline Belt and the easterly Rocky Mountain Fold and Thrust Belt. Synkinematic metamorphism of Jurassic age within the Omineca Belt is thought to be associated with accretion of westerly terranes of the Pacific Orogen—more specifically the Quesnellia terrane—that was thrust easterly over the Omineca Belt towards the craton. Mylonitic rocks mark the margin between these two belts and this margin is well-exposed near Crooked Lake, central British Columbia.Structural analysis across the zone of convergence between these two terranes indicates that the cratonic basement and the accreted cover sequences have several phases of deformation and metamorphism in common. The initial common phase of deformation, wherein convergence is accomplished, is characterized by easterly verging folds that are superposed by a second common phase having westerly verging folds that deform the zone of convergence and control the present regional map pattern. A final common phase of deformation produced easterly verging folds.Change in vergence direction is interpreted as resulting from change in direction of transport related to subduction process: first obduction of Quesnellia onto the Omineca craton, followed later by easterly subduction of an oceanic Quesnellia below the craton.All evidence of transport direction(s) points to convergence occurring at very high angles to the zone of convergence. There appears to be no evidence of transport parallel with the strike of the zone. If transport has taken place parallel to the strike of the zone, then this transport occurred before convergence or evidence of this motion has been destroyed during the convergence. 相似文献
9.
The northwestern corner of New South Wales consists of the paratectonic Late Proterozoic to Early Cambrian Adelaide Fold Belt and older rocks, which represent basement inliers in this fold belt. The rest of the state is built by the composite Late Proterozoic to Triassic Tasman Fold Belt System or Tasmanides.In New South Wales the Tasman Fold Belt System includes three fold belts: (1) the Late Proterozoic to Early Palaeozoic Kanmantoo Fold Belt; (2) the Early to Middle Palaeozoic Lachlan Fold Belt; and (3) the Early Palaeozoic to Triassic New England Fold Belt. The Late Palaeozoic to Triassic Sydney—Bowen Basin represents the foredeep of the New England Fold Belt.The Tasmanides developed in an active plate margin setting through the interaction of East Gondwanaland with the Ur-(Precambrian) and Palaeo-Pacific plates. The Tasmanides are characterized by a polyphase terrane accretion history: during the Late Proterozoic to Triassic the Tasmanides experienced three major episodes of terrane dispersal (Late Proterozoic—Cambrian, Silurian—Devonian, and Late Carboniferous—Permian) and six terrane accretionary events (Cambrian—Ordovician, Late Ordovician—Early Silurian, Middle Devonian, Carboniferous, Middle-Late Permian, and Triassic). The individual fold belts resulted from one or more accretionary events.The Kanmantoo Fold Belt has a very restricted range of mineralization and is characterized by stratabound copper deposits, whereas the Lachlan and New England Fold Belts have a great variety of metallogenic environments associated with both accretionary and dispersive tectonic episodes.The earliest deposits in the Lachlan Fold Belt are stratabound Cu and Mn deposits of Cambro-Ordovician age. In the Ordovician Cu deposits were formed in a volcanic are. In the Silurian porphyry Cu---Au deposits were formed during the late stages of development of the same volcanic are. Post-accretionary porphyry Cu---Au deposits were emplaced in the Early Devonian on the sites of the accreted volcanic arc. In the Middle to Late Silurian and Early Devonian a large number of base metal deposits originated as a result of rifting and felsic volcanism. In the Silurian and Early Devonian numerous Sn---W, Mo and base metal—Au granitoid related deposits were formed. A younger group of Mo---W and Sn deposits resulted from Early—Middle Carboniferous granitic plutonism in the eastern part of the Lachlan Fold Belt. In the Middle Devonian epithermal Au was associated with rifting and bimodal volcanism in the extreme eastern part of the Lachlan Fold Belt.In the New England Fold Belt pre-accretionary deposits comprise stratabound Cu and Mn deposits (pre-Early Devonian): stratabound Cu and Mn and ?exhalite Au deposits (Late Devonian to Early Carboniferous); and stratabound Cu, exhalite Au, and quartz—magnetite (?Late Carboniferous). S-type magmatism in the Late Carboniferous—Early Permian was responsible for vein Sn and possibly Au---As---Ag---Sb deposits. Volcanogenic base metals, when compared with the Lachlan Fold Belt, are only poorly represented, and were formed in the Early Permian. The metallogenesis of the New England Fold Belt is dominated by granitoid-related mineralization of Middle Permian to Triassic age, including Sn---W, Mo---W, and Au---Ag---As Sb deposits. Also in the Middle Permian epithermal Au---Ag mineralization was developed. During the above period of post-orogenic magmatism sizeable metahydrothermal Sb---Au(---W) and Au deposits were emplaced in major fracture and shear zones in central and eastern New England. The occurrence of antimony provides an additional distinguishing factor between the New England and Lachlan Fold Belts. In the New England Fold Belt antimony deposits are abundant whereas they are rare in the Lachlan Fold Belt. This may suggest fundamental crustal differences. 相似文献
10.
One of the most significant, but poorly understood, tectonic events in the east Lachlan Fold Belt is that which caused the shift from mafic, mantle‐derived calc‐alkaline/shoshonitic volcanism in the Late Ordovician to silicic (S‐type) plutonism and volcanism in the late Early Silurian. We suggest that this chemical/isotopic shift required major changes in crustal architecture, but not tectonic setting, and simply involved ongoing subduction‐related magmatism following burial of the pre‐existing, active intraoceanic arc by overthrusting Ordovician sediments during Late Ordovician — Early Silurian (pre‐Benambran) deformation, associated with regional northeast‐southwest shortening. A review of ‘type’ Benambran deformation from the type area (central Lachlan Fold Belt) shows that it is constrained to a north‐northwest‐trending belt at ca 430 Ma (late Early Silurian), associated with high‐grade metamorphism and S‐type granite generation. Similar features were associated with ca 430 Ma deformation in east Lachlan Fold Belt, highlighted by the Cooma Complex, and formed within a separate north‐trending belt that included the S‐type Kosciuszko, Murrumbidgee, Young and Wyangala Batholiths. As Ordovician turbidites were partially melted at ca 430 Ma, they must have been buried already to ～20 km before the ‘type’ Benambran deformation. We suggest that this burial occurred during earlier northeast‐southwest shortening associated with regional oblique folds and thrusts, loosely referred to previously as latitudinal or east‐west structures. This event also caused the earliest Silurian uplift in the central Lachlan Fold Belt (Benambran highlands), which pre‐dated the ‘type’ Benambran deformation and is constrained as latest Ordovician — earliest Silurian (ca 450–440 Ma) in age. The south‐ to southwest‐verging, earliest Silurian folds and thrusts in the Tabberabbera Zone are considered to be associated with these early oblique structures, although similar deformation in that zone probably continued into the Devonian. We term these ‘pre’‐ and ‘type’‐Benambran events as ‘early’ and ‘late’ for historical reasons, although we do not consider that they are necessarily related. Heat‐flow modelling suggests that burial of ‘average’ Ordovician turbidites during early Benambran deformation at 450–440 Ma, to form a 30 km‐thick crustal pile, cannot provide sufficient heat to induce mid‐crustal melting at ca 430 Ma by internal heat generation alone. An external, mantle heat source is required, best illustrated by the mafic ca 430 Ma, Micalong Swamp Igneous Complex in the S‐type Young Batholith. Modern heat‐flow constraints also indicate that the lower crust cannot be felsic and, along with petrological evidence, appears to preclude older continental ‘basement terranes’ as sources for the S‐type granites. Restriction of the S‐type batholiths into two discrete, oblique, linear belts in the central and east Lachlan Fold Belt supports a model of separate magmatic arc/subduction zone complexes, consistent with the existence of adjacent, structurally imbricated turbidite zones with opposite tectonic vergence, inferred by other workers to be independent accretionary prisms. Arc magmas associated with this ‘double convergent’ subduction system in the east Lachlan Fold Belt were heavily contaminated by Ordovician sediment, recently buried during the early Benambran deformation, causing the shift from mafic to silicic (S‐type) magmatism. In contrast, the central Lachlan Fold Belt magmatic arc, represented by the Wagga‐Omeo Zone, only began in the Early Silurian in response to subduction associated with the early Benambran northeast‐southwest shortening. The model requires that the S‐type and subsequent I‐type (Late Silurian — Devonian) granites of the Lachlan Fold Belt were associated with ongoing, subduction‐related tectonic activity. 相似文献
11.
C.G. Murray 《Ore Geology Reviews》1986,1(2-4)
The northern part of the Tasman Fold Belt System in Queensland comprises three segments, the Thomson, Hodgkinson- Broken River, and New England Fold Belts. The evolution of each fold belt can be traced through pre-cratonic (orogenic), transitional, and cratonic stages. The different timing of these stages within each fold belt indicates differing tectonic histories, although connecting links can be recognised between them from Late Devonian time onward. In general, orogenesis became younger from west to east towards the present continental margin. The most recent folding, confined to the New England Fold Belt, was of Early to mid-Cretaceous age. It is considered that this eastward migration of orogenic activity may reflect progressive continental accretion, although the total amount of accretion since the inception of the Tasman Fold Belt System in Cambrian time is uncertain.The Thomson Fold Belt is largely concealed beneath late Palaeozoic and Mesozoic intracratonic basin sediments. In addition, the age of the more highly deformed and metamorphosed rocks exposed in the northeast is unknown, being either Precambrian or early Palaeozoic. Therefore, the tectonic evolution of this fold belt must remain very speculative. In its early stages (Precambrian or early Palaeozoic), the Thomson Fold Belt was probably a rifted continental margin adjacent to the Early to Middle Proterozoic craton to the west and north. The presence of calc-alkaline volcanics of Late Cambrian Early Ordovician and Early-Middle Devonian age suggests that the fold belt evolved to a convergent Pacific-type continental margin. The tectonic setting of the pre-cratonic (orogenic) stage of the Hodgkinson—Broken River Fold Belt is also uncertain. Most of this fold belt consists of strongly deformed, flysch-type sediments of Silurian-Devonian age. Forearc, back-arc and rifted margin settings have all been proposed for these deposits. The transitional stage of the Hodgkinson—Broken River Fold Belt was characterised by eruption of extensive silicic continental volcanics, mainly ignimbrites, and intrusion of comagmatic granitoids in Late Carboniferous Early Permian time. An Andean-type continental margin model, with calc-alkaline volcanics erupted above a west-dipping subduction zone, has been suggested for this period. The tectonic history of the New England Fold Belt is believed to be relatively well understood. It was the site of extensive and repeated eruption of calc-alkaline volcanics from Late Silurian to Early Cretaceous time. The oldest rocks may have formed in a volcanic island arc. From the Late Devonian, the fold belt was a convergent continental margin above a west-dipping subduction zone. For Late Devonian- Early Carboniferous time, parallel belts representing continental margin volcanic arc, forearc basin, and subduction complex can be recognised.A great variety of mineral deposits, ranging in age from Late Cambrian-Early Ordovician and possibly even Precambrian to Early Cretaceous, is present in the exposed rocks of the Tasman Fold Belt System in Queensland. Volcanogenic massive sulphides and slate belt-type gold-bearing quartz veins are the most important deposits formed in the pre-cratonic (orogenic) stage of all three fold belts. The voicanogenic massive sulphides include classic Kuroko-type orebodies associated with silicic volcanics, such as those at Thalanga (Late Cambrian-Early Ordovician. Thomson Fold Belt) and at Mount Chalmers (Early Permian New England Fold Belt), and Kieslager or Besshi-type deposits related to submarine mafic volcanics, such as Peak Downs (Precambrian or early Palaeozoic, Thomson Fold Belt) and Dianne. OK and Mount Molloy (Silurian—Devonian, Hodgkinson Broken River Fold Belt). The major gold—copper orebody at Mount Morgan (Middle Devonian, New England Fold Belt), is considered to be of volcanic or subvolcanic origin, but is not a typical volcanogenic massive sulphide.The most numerous ore deposits are associated with calc-alkaline volcanics and granitoid intrusives of the transitional tectonic stage of the three fold belts, particularly the Late Carboniferous Early Perman of the Hodgkinson—Broken River Fold Belt and the Late Permian—Middle Triassic of the southeast Queensland part of the New England Fold Belt. In general, these deposits are small but rich. They include tin, tungsten, molybdenum and bismuth in granites and adjacent metasediments, base metals in contact meta somatic skarns, gold in volcanic breccia pipes, gold-bearing quartz veins within granitoid intrusives and in volcanic contact rocks, and low-grade disseminated porphyry-type copper and molybdenum deposits. The porphyry-type deposits occur in distinct belts related to intrusives of different ages: Devonian (Thomson Fold Belt), Late Carboniferous—Early Permian (Hodgkinson—Broken River Fold Belt). Late Permian Middle Triassic (southeast Queensland part of the New England Fold Belt), and Early Cretaceous (northern New England Fold Belt). All are too low grade to be of economic importance at present.Tertiary deep weathering events were responsible for the formation of lateritic nickel deposits on ultramafics and surficial manganese concentrations from disseminated mineralisation in cherts and jaspers. 相似文献
12.
Critical assessment of Paleozoic paleomagnetic results from Australia shows that paleopoles from locations on the main craton and in the various terranes of the Tasman Fold Belt of eastern Australia follow the same path since 400 Ma for the Lachlan and Thomson superterranes, but not until 250 Ma or younger for the New England superterrane. Most of the paleopoles from the Tasman Fold Belt are derived from the Lolworth-Ravenswood terrane of the Thomson superterrane and the Molong-Monaro terrane of the Lachlan superterrane. Consideration of the paleomagnetic data and geological constraints suggests that these terranes were amalgamated with cratonic Australia by the late Early Devonian. The Lolworth-Ravenswood terrane is interpreted to have undergone a 90° clockwise rotation between 425 and 380 Ma. Although the Tamworth terrane of the western New England superterrane is thought to have amalgamated with the Lachlan superterrane by the Late Carboniferous, geological syntheses suggest that movements between these regions may have persisted until the Middle Triassic. This view is supported by the available paleomagnetic data. With these constraints, an apparent polar wander path for Gondwana during the Paleozoic has been constructed after review of the Gondwana paleomagnetic data. The drift history of Gondwana with respect to Laurentia and Baltica during the Paleozoic is shown in a series of paleogeographic maps. 相似文献
13.
In western Tasmania, small Precambrian regions are surrounded by a ramifying system of troughs filled with Cambrian sedimentary and volcanic rocks, and ophiolite complexes. The volcanic associations include a rift-related olivine tholeiite association, dacite-rhyolite and andesite associations, and a low-Ti, high-Mg andesite-tholeiite ophiolite association, and may have formed during a long-lived period of crustal thinning, punctuated by episodes of crustal rupturing, magmatism, and small scale rifting. Such extensional tectonism could occur in an active continental margin associated with strike-slip faulting of regional scale, and the volcanic associations may together constitute an igneous assemblage characteristic of magmatism in a transcurrent tectonic regime within an active continental margin undergoing break-up.
The western Tasmanian Cambrian palaeogeography and volcanism preserve a transitional stage between the Late Proterozoic Kanmantoo regime of sedimentary basins with little volcanism developed at the rifting margin of the Proterozoic craton, and the tectonic regime of the Palaeozoic Lachlan Fold Belt where the Cambrian volcanic rocks are dominated by island-arc associations and the rift-related olivine tholeiite association is absent. Eastern Australian lithosphere may have grown by the insertion of newly-formed igneous complexes within the stretched and rifted continental margin, as well as by the accretion of “terrenes” and the addition of packets of subduction complexes which developed off-shore. 相似文献
14.
《Australian Journal of Earth Sciences》2013,60(6):773-817
The Lachlan Orogen,like many other orogenic belts,has undergone paradigm shifts from geosynclinal to plate-tectonic theory of evolution over the past 40 years. Initial plate-tectonic interpretations were based on lithologic associations and recognition of key plate-tectonic elements such as andesites and palaeo-subduction complexes. Understanding and knowledge of modern plate settings led to the application of actualistic models and the development of palaeogeographical reconstructions, commonly using a non-palinspastic base. Igneous petrology and geochemistry led to characterisation of granite types into ‘I’ and ‘S’, the delineation of granite basement terranes, and to non-mobilistic tectonic scenarios involving plumes as a heat source to drive crustal melting and lithospheric deformation. More recently, measurements of isotopic tracers (Nd, Sr, Pb) and U–Pb SHRIMP age determinations on inherited zircons from granitoids and detrital zircons from sedimentary successions led to the development of multiple component mixing models to explain granite geochemistry. These have focused tectonic arguments for magma genesis again more on plate interactions. The recognition of fault zones in the turbidites, their polydeformed character and their thin-skinned nature, as well as belts of distinct tectonic vergence has led to a major reassessment of tectonic development. Other geochemical studies on Cambrian metavolcanic belts showed that the basement was partly backarc basin- and forearc basin-type oceanic crust. The application of 40Ar–39Ar geochronology and thermochronology on slates,schist and granitoids has better constrained the timing of deformation and plutonism,and illite crystallinity and bo mica spacing studies on slates have better defined the background metamorphic conditions in the low-grade parts. The Lachlan deformation pattern involves three thrust systems that constitute the western Lachlan Orogen, central Lachlan Orogen and eastern Lachlan Orogen. The faults in the western Lachlan Orogen show a generalised east-younging (450–395 Ma), which probably relates to imbrication and rock uplift of the sediment wedge, because detailed analyses show that the décollement system is as old in the east as it is in the west. Overall, deformation in the eastern Lachlan Orogen is younger (400–380 Ma), apart from the Narooma Accretionary Complex (ca 445 Ma). Preservation of extensional basins and evidence for basin inversion are largely restricted to the central and eastern parts of the Lachlan Orogen. The presence of dismembered ophiolite slivers along some major fault zones, as well as the recognition of relict blueschist metamorphism and serpentinite-matrix mélanges requires an oceanic setting involving oceanic underthrusting (subduction) for the western Lachlan Orogen and central Lachlan Orogen for parts of their history. Inhibited by deep weathering and a general lack of exposure, the recent application of geophysical techniques including gravity, aeromagnetic imaging and deep crustal seismic reflection profiling has led to greater recognition of structural elements through the subcrop, a better delineation of their lateral continuity, and a better understanding of the crustal-scale architecture of the orogen. The Lachlan Orogen clearly represents a class of orogen, distinct from the Alps, Canadian Rockies and Appalachians, and is an excellent example of a Palaeozoic accretionary orogen. 相似文献
15.
The Lachlan Transverse Zone is a major yet subtle west‐northwest‐trending structure that cuts across the Tasmanides of southeastern Australia. It extends from the western part of the Olepoloko Fault in the west, where it marks the boundary between the Delamerian and Thomson Orogens, across the Lachlan Orogen into the Sydney Basin where it is represented by dykes and intrusions. The western part of the Lachlan Transverse Zone is defined by west‐northwest‐trending faults. In the Eastern Belt of the Lachlan Orogen, it is defined as a corridor of west‐northwest‐trending folds and faults that disrupt major folds and faults which constitute the regional grain of the orogen. The Lachlan Transverse Zone was active in the development of the Lachlan Orogen since at least the Middle Ordovician period. It has influenced the partitioning of upper crustal extensional and contractional deformation, the intrusion of igneous bodies as well as the distribution of copper‐gold deposits in the Eastern Belt of the orogen. The Lachlan Transverse Zone appears to be an extension of the Proterozoic Amadeus Transverse Zone, as well as an extension of a west‐northwest‐trending transform segment in the Tasman Line that controlled the Neoproterozoic and Cambrian breakup of cratonic Australia. For these reasons, we suggest that the Lachlan Transverse Zone represents the reactivation of a fundamental crustal weakness in the cratonic lithosphere that propagated into younger Neoproterozoic to Palaeozoic lithosphere of oceanic and continental character. 相似文献
16.
Many granites have compositional features that directly reflect the composition of their source rocks. Since most granites come from the deeper parts of the Earth's crust, their study provides information about the nature of parts of that deep crust. Granites and related volcanic rocks are abundant and widely distributed in the Palaeozoic Lachlan Fold Belt of southeastern Australia. These granites show patterns of regional variation in which sharp discontinuities occur between provinces which internally are of a rather constant character. Such a discontinuity has long been recognized at the I‐S line and the extent of that line can now be defined more fully. Breaks of this type are thought to correspond to sharp changes in the composition of the deep crust that correspond to unexposed or basement terranes. Nine such basement terranes can be recognized in the Lachlan Fold Belt. The character of these basement terranes appears to be different from that of the terranes recognized in the Mesozoic‐Cainozoic Cordilleran fold belt, in which the plates accreted during the period of tectonism reflected in the exposed surface rocks. In the Lachlan Fold Belt, it is postulated that fragments of continental crust, or microplates, were assembled in the Late Proterozoic or Early Palaeozoic to form the substrate of the presently exposed Palaeozoic sedimentary rocks; the compositional features of these fragments were later redistributed vertically by magmatic processes. The identification of basement terranes of this type shows that models which involve the lateral growth of the Lachlan Fold Belt during the Palaeozoic, in a manner analogous to the accretion of younger belts, are untenable. These basement terranes have implications for mineral exploration because the content of heavy metals can vary from one to another and this would ultimately affect the probability of concentrating these metals to form a mineral deposit. 相似文献
17.
《Gondwana Research》2014,25(3-4):1051-1066
The Early Palaeozoic Ross–Delamerian orogenic belt is considered to have formed as an active margin facing the palaeo-Pacific Ocean with some island arc collisions, as in Tasmania (Australia) and Northern Victoria Land (Antarctica), followed by terminal deformation and cessation of active convergence. On the Cambrian eastern margin of Australia adjacent to the Delamerian Fold Belt, island arc and backarc basin crust was formed and is now preserved in the Lachlan Fold Belt and is consistent with a spatial link between the Delamerian and Lachlan orogens. The Delamerian–Lachlan connection is tested with new zircon data. Metamorphic zircons from a basic eclogite sample from the Franklin Metamorphic Complex in the Tyennan region of central Tasmania have rare earth element signatures showing that eclogite metamorphism occurred at ~ 510 Ma, consistent with island arc–passive margin collision during the Delamerian(− Tyennan) Orogeny. U–Pb ages of detrital zircons have been determined from two samples of Ordovician sandstones in the Lachlan Fold Belt at Melville Point (south coast of New South Wales) and the Howqua River (western Tabberabbera Zone of eastern Victoria). These rocks were chosen because they are the first major clastic influx at the base of the Ordovician ‘Bengal-fan’ scale turbidite pile. The samples show the same prominent peaks as previously found elsewhere (600–500 Ma Pacific-Gondwana and the 1300–1000 Ma Grenville–Gondwana signatures) reflecting supercontinent formation. We highlight the presence of ~ 500 Ma non-rounded, simple zircons indicating clastic input most likely from igneous rocks formed during the Delamerian and Ross Orogenies. We consider that the most probable source of the Ordovician turbidites was in East Antarctica adjacent to the Ross Orogen rather than reflecting long distance transport from the Transgondwanan Supermountain (i.e. East African Orogen). Together with other provenance indicators such as detrital mica ages, this is a confirmation of the Delamerian–Lachlan connection. 相似文献
18.
中国中西部小型克拉通盆地群的叠合复合性质及其含油气系统 总被引：14，自引：2，他引：12
中国中西部盆地油气资源潜力巨大,是晚古生代一早中生代一新生代大型造山带环绕的小型克拉通盆地,盆地核心为构造相对稳定的小型克拉通,边缘环绕构造活跃的前陆冲断带。与北美、欧洲等大型含油气盆地相比,中国含油气盆地规模小、构造活动性强。盆地普遍经历：（1）寒武—志留纪,各自漂离于大洋中的小型克拉通盆地;（2）泥盆—二叠纪,亚欧板块南缘地体增生;（3）三叠—古近纪,特提斯洋关闭,陆相断（坳）陷盆地;（4）新近纪以来,再生前陆盆地等四个构造演化阶段。从下而上叠合了早古生代海相克拉通盆地、晚古生代海陆交互相克拉通盆地、早中生代陆相断（坳）陷盆地和新生代再生前陆盆地四个构造层序。古生界克拉通盆地构造相对稳定,古生代发育多期不整合界面和大型古隆起;中新生代前陆盆地叠置复合在其边缘,发育成排成带的构造。中国含油气盆地的叠合-复合性质决定了其叠合-复合含油气系统的特征：具有多油气系统、多源多阶段生烃、多期成藏、多层系含油气。中国中西部盆地的油气勘探主要包括古生界小型克拉通层序和中新生代前陆层序两大领域,其中早古生代克拉通层序以古隆起及其斜坡、晚古生代克拉通层序以大面积岩性储集体、中新生代前陆盆地以大型冲断带控制着油气的成藏与富集。 相似文献
19.
20.
岩石圈中热压系数的计算 总被引：2，自引：0，他引：2
中国中西部地区发育众多前陆冲断带,它们具有构造变形复杂、油气潜力大和有别于经典前陆盆地的沉积和油气地质特征,但其成因过程和动力学并不清楚。文中利用中西部盆地区的地温、岩石热物性参数和地热学模拟技术,分析该区岩石圈热状态和流变学特征,进一步结合其他地质、地球物理资料,揭示盆地区的深部构造特征和岩石圈性质。研究表明,中西部各主要盆地的岩石圈具有厚度大、强度高、地温低等热-流变学特征,表现为刚硬块体;而其周缘和造山带区却表现为温度高、强度低和厚度小等特征,是构造变形的易发区。在此基础上讨论了岩石圈性质和变形过程等深部构造对前陆盆地成因演化的控制作用,进而初步归纳这类陆内再生前陆盆地的成因演化机制:发育于小型克拉通块体的边缘,其就位受控于岩石圈热-流变学非均质性和构造继承性,其动力来源是新生代印度-欧亚大陆碰撞及其持续的挤压作用。上述研究为探讨中国中西部地区的前陆盆地成因机制提供了深部资料和岩石圈热-流变学约束。 相似文献