首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
In the mining environments of the Iberian Pyrite Belt (IPB), the oxidation of sulphide wastes generates acid drainage with high concentrations of SO4, metals and metalloids (Acid Mine Drainage, AMD). These acid and extremely contaminated discharges are drained by the fluvial courses of the Huelva province (SW Spain) which deliver high concentrations of potentially toxic elements into the Gulf of Cádiz. In this work, the oxidation process of mine tailings in the IPB, the generation of AMD and the potential use of coal combustion fly ash as a possible alkaline treatment for neutralization of and metal removal from AMD, was studied in non-saturated column experiments. The laboratory column tests were conducted on a mine residue (71.6 wt% pyrite) with artificial rainfall or irrigation. A non-saturated column filled solely with the pyrite residue leached solutions with an acid pH (approx. 2) and high concentrations of SO4 and metals. These leachates have the same composition as typical AMD, and the oxidation process can be compared with the natural oxidation of mine tailings in the IPB. However, the application of fly ash to the same amount of mine residue in another two non-saturated columns significantly increased the pH and decreased the SO4 and metal concentrations in the leaching solutions. The improvement in the quality of leachates by fly ash addition in the laboratory was so effective that the leachate reached the pre-potability requirements of water for human consumption under EU regulations. The extrapolation of these experiments to the field is a promising solution for the decontamination of the fluvial courses of the IPB, and therefore, the decrease of pollutant loads discharging to the Gulf of Cádiz.  相似文献   

2.
Mine tailings are ubiquitous in the landscapes of mined areas. Metal solubilities were compared in two chemically distinct mine tailings from the old Mining District of Cartagena-La Unión (SE Spain). One of the tailings was acidic (pH 3.0) with 5400 mg/kg Zn, 1900 mg/kg As and 7000 mg/kg Pb. The other was neutral (pH 7.4) with 9100 mg/kg Zn, 5200 mg/kg Pb and 350 mg/kg As. In samples from the acidic tailings, more than 15% of the Zn and 55% of the Cd were extractable with 0.1 M NaNO3, and distilled water. In the neutral tailings, using the same reagents, less than 1% of the metals were extractable. A sequential extraction procedure revealed that the sum of the residual and the Fe oxide fractions of Cu, Zn and Pb comprised 80–95% in the acidic tailings and 70–90% in the neutral tailings. The acidic mine tailings had a higher metal solubility, resulting in more metal leaching in the short-term, but also a higher fraction of inert metal. In contrast, in the neutral tailings, the metals were evenly distributed between, oxides and the residual fraction. This implies lower metal mobility in the short-term, but that metal mobility may increase in the long-term. When applied to mine tailings, sequential extractions may provide misleading results because the strong cation exchange capacity of some extractants may induce pH changes and thereby significantly change metal solubility.  相似文献   

3.
The purpose of this work is to characterize the hydrochemical behavior of acid mine drainages (AMD) and superficial waters from the Adoria mine area (Northern Portugal). Samples of superficial and mine drainage water were collected for one year, bi-monthly, with pH, temperature, Eh, conductivity and HCO3 determined in situ with chemical analyses of SO4, Ca, K, Mg, Na, Cl, Ag, As, Bi, Co, Cu, Fe, Mn, Ni, Pb, Zn and Cd. In the mine, there are acidic waters, with low pH and significant concentrations of SO4, and metals (Fe, Mn, Zn, Cu, Pb, Cd and Ni), while in the superficial natural stream waters outside the mine, the pH is close to neutral, with low conductivity and lower metal concentrations. The stream waters inside the mine influence are intermediate in composition between AMD and natural stream waters outside the mine influence. Principal Component Analysis (PCA) shows a clear separation between AMD galleries and AMD tailings, with tailings having a greater level of contamination.  相似文献   

4.
Coal mine rejects and sulfide bearing coals are prone to acid mine drainage (AMD) formation due to aqueous weathering. These acidic effluents contain dissolved trace and potentially harmful elements (PHEs) that have considerable impact on the environment. The behavior of these elements in AMD is mainly controlled by pH. The focus of the present study is to investigate aqueous leaching of mine rejects for prediction of acid producing potential, rates of weathering, and release of PHEs in mine drainage. Mine reject (MR) and coal samples from the active mine sites of Meghalaya, India typically have high S contents (1.8–5.7% in MR and 1.7–4.7% in coals) with 75–90% of the S in organic form and enrichment of most of the PHEs in rejects. Aqueous kinetic leaching experiments on mine rejects showed high acid producing potential and release of trace and potentially harmful elements. The elements (Sb, As, Cd, Cr, Co, Cu, Pb, Mn, Ni, V and Zn) in mine sample leachates are compared with those in mine waters. The concentrations of Al, Si, P, K, Ti, Mn, Fe, Co, Ni, Cu, Zn and Pb are found to increase with leaching time and are negatively correlated with pH of the solution. The processes controlling the release of these elements are acid leaching, precipitation and adsorption. The critical loads of PHEs in water affected by AMD are calculated by comparing their concentrations with those of regulatory levels. The Enrichment Factors (EFs) and soil pollution indices (SPIs) for the elements have shown that PHEs from coal and mine reject samples are mobilized into the nearby environment and are enriched in the associated soil and sediment.  相似文献   

5.
Acid mine drainage (AMD) is a common pollution in mining areas due to the oxidation of pyrite and associated sulfide minerals at mines, tailings and mine dumps. Elevated metals (Fe, Mn, Al) and metalloids (As, Hg) in AMD would deteriorate the local aquatic environment and influence the water supply. A carbonate basin with deposits of high-arsenic coal in Xingren County, southwestern China, was chosen to study the behavior of As and other chemical constituents along a river receiving AMD. Heavy metals (Fe, Mn) and major ions such as (Ca2+, Mg2+, Cl−, SO4 2−) in surface water, and As in sediment and surface water were analyzed. It was found that high concentrations of SO4 2− (1,324–7,560 mg/L) and Fe (369–1,472 mg/L) in surface water were mainly controlled by the interactions between water and rocks such as the oxidation of pyrite in the local coal seams, precipitation and adsorption of iron minerals. Although ubiquitous carbonate minerals in the bedrock and the riverbeds, low pH (<3) water was maintained until 2 km downstream from the AMD source due to the Fe(hydro)oxide minerals coating on the surface of carbonate minerals to restrain the neutralization of acidic water. Moreover, the formation of Fe(hydro)oxide precipitations absorbed As was dominated the attenuation of As from water to sediment. Whereas, the dilution also played an important role in decrease of As in river water.  相似文献   

6.
The chemical characteristics, formation and natural attenuation of pollutants in the coal acid mine drainage (AMD) at Xingren coalfield, Southwest China, are discussed in this paper based on the results of a geochemical investigation as well as geological and hydrogeological background information. The chemical composition of the AMD is controlled by the dissolution of sulfide minerals in the coal seam, the initial composition of the groundwater and the water–rock interaction. The AMD is characterized by high sulfate concentrations, high levels of dissolved metals (Fe, Al, Mn, etc.) and low pH values. Ca2+ and SO4 2− are the dominant cation and anion in the AMD, respectively, while Ca2+ and HCO3 − are present at significant levels in background water and surface water after the drainage leaves the mine site. The pH and alkalinity increase asymptotically with the distance along the flow path, while concentrations of sulfate, ferrous iron, aluminum and manganese are typically controlled by the deposition of secondary minerals. Low concentrations of As and other pollutants in the surface waters of the Xingren coalfield could be due to relatively low quantities being released from coal seams, to adsorption and coprecipitation on secondary minerals in stream sediments, and to dilution by unpolluted surface recharge. Although As is not the most serious water quality problem in the Xingren region at present, it is still a potential environmental problem. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

7.
The oxidation and subsequent dissolution of sulfide minerals within mine tailings impoundments releases H+, Fe(II), SO4 and trace elements to the tailings pore water. Subsequent pH-buffering and hydrolysis reactions result in the precipitation of secondary phases such as gypsum, goethite and jarosite. In areas of intense precipitation, cemented layers or “hardpans” often form within the shallow tailings. Three cemented layers within pyrrhotite-bearing mine tailings at the Fault Lake, Nickel Rim and East Mine impoundments located near Sudbury, Canada, were examined. The location of the three cemented layers within the tailings stratigraphy varies as does their location relative to the water table. The morphology, mineralogy and chemical composition of the cemented layers also vary between sites. The bulk density within the three cemented layers all showed an increase relative to the surrounding uncemented tailings ranging from 9% to 29%. The porosity of each cemented layer decreased relative to the surrounding uncemented tailings ranging from an 8% to 18% decrease. The cemented layers also showed relative enrichment of total sulfur, carbon and trace elements relative to the surrounding uncemented tailings. Arsenic concentrations showed an enrichment in the cemented layers of up to 132%, Cd up to 99%, Co up to 84%, Cu up to 144%, Ni up to 693% and Zn up to 145% relative to the surrounding uncemented tailings. All the cemented layers studied show an evolution of the secondary phases with time from a gypsum–jarosite-based cement to a goethite-rich cement. The formation of these layers could potentially have a significant effect on the environmental impacts of sulfide-bearing mine waste.  相似文献   

8.
The Caldas Uranium Mine (CUM), located on the Poços de Caldas Plateau in the southeastern region of Brazil, is presently undergoing a decommissioning process. The aim of the present investigation is to identify and characterize the effects of acid mine drainage (AMD) originating from the CUM on surface water quality. To achieve these aims, sampling stations were located at two AMD sources: the retention pond at the foot of waste rock pile#4 (WRP#4) and the settling pond that receives effluents from the tailings dam (TD). Ten additional sampling stations were located along watercourses in the vicinity, both downstream and upstream of the mine. Sampling was performed during the rainy and dry seasons in 2010 and 2011. The water analysis detected significant changes in pH, electrical conductivity, F?, Cd, U, Zn, Al, Mn, As, Ca, SO4 2?, Pb, 238U, 226Ra, 210Pb, 232Th, 228Ra, and Mo in waters downstream of both pond discharge sites. It was demonstrated that the disequilibrium between 226Ra and 238U can be used to trace the extent of AMD impacts in nearby streams. Variations in 18O and 2H enabled the flow of mining-impacted water to be traced from the ponds to nearby streams. Multivariate analysis yielded a three-factor model: Factor 1 was interpreted as being associated with AMD (from WRP#4) and Factor 2 with a Ca–Mo relationship associated with the chemical constitution of the ore and with the treatment of tailings wastes in the area (from TD); Factor 3 was interpreted as being associated with the natural influence of geogenic processes on water quality in the area. The results of this study provide a scientific basis for recommending appropriate remedial actions during mine decommissioning.  相似文献   

9.
《Applied Geochemistry》2002,17(5):569-581
This study examined the sorption of trace metals to precipitates formed by neutralization of 3 natural waters contaminated with acid mine drainage (AMD) in the former Ducktown Mining District, Tennessee. The 3 water samples were strongly acidic (pH 2.2 to 3.4) but had distinctively different chemical signatures based on the mole fractions of dissolved Fe, Al and Mn. One sample was Fe-rich (Fe=87.5%, Al=11.3%, and Mn=1.3%), another was Al-rich (Al=79.4%, Mn=18.0%, and Fe=2.5%), and the other was Mn-rich (Mn=51.4%, Al=25.7%, and Fe=22.9%). In addition, these waters had high concentrations of trace metals including Zn (37,700 to 17,400 μg/l), Cu (13,000 to 270 μg/l), Co (1,500 to 520 μg/l), Ni (360 to 75 μg/l), Pb (30 to 8 μg/l), and Cd (30 to 6 μg/l). Neutralization of the AMD-contaminated waters in the laboratory caused the formation of either schwertmannite at pH<4 or ferrihydrite at pH>4. Both phases were identified by XRD analyses of precipitates from the most Fe-rich water. At higher pH values (∼5) Al-rich precipitates were formed. Manganese compounds were precipitated at pH∼8. The removal of trace metals depended on the precipitation of these compounds, which acted as sorbents. Accordingly, the pH for 50% sorption (pH50) ranged from 5.6 to 7.5 for Zn, 4.6 to 6.1 for Cu, 5.4 to 7.7 for Ni, 5.9 to 7.9 for Co, 3.1 to 4.3 for Pb, and 5.5 to 7.7 for Cd. The pH dependence of sorption arose not only because of changes in the sorption coefficients of the trace metals but also because the formation and composition of the sorbent was controlled by the pH, the chemical composition of the water, and the solubilities of the oxyhydroxide-sulfate complexes of Fe, Al, and Mn.  相似文献   

10.
The use of covers with capillary barrier effects (CCBEs) for reducing acid mine drainage (AMD) from sulphidic mine tailings is simulated using the MIN3P finite volume model for coupled groundwater flow, O2 diffusion and multi-component reactive transport. The model is applied to simulate five pilot-scale in situ test cells containing reactive tailings from the Manitou mine site, Val d’Or, Que., Canada. Four of the cells were constructed with CCBEs over the tailings, while the fifth tailings cell was left uncovered. Observed and simulated discharge from the base of each cell showed that the capillary barrier covers significantly reduced sulphide oxidation and AMD. Compared to acidic discharge from the uncovered cell, discharge from the four CCBE-covered cells had neutral pH levels and 1–7 orders of magnitude lower concentrations of SO4, Fe, Zn, Cu and Al. The simulations showed that the moisture retaining layer of the CCBEs reduced AMD by inhibiting O2 diffusion into the underlying reactive wastes. Provided the moisture-retention layer of the CCBE remains close to saturation, its thickness had a relatively minor effect. Under such near-saturated conditions, O2 availability is limited by its diffusion rate through the bulk porous medium and not by the diffusion rate through the oxidized grain shells. The model is providing important new insights for comparing design alternatives for reducing or controlling AMD.  相似文献   

11.
The Haveri tailings area contains 1.5 Mt of sulfide-bearing waste from the Au–Cu mine that operated during 1942–1961. Geophysical and geochemical methods were used to evaluate and characterize the generation of acid mine drainage (AMD). Correlations were examined among the electrical resistivity tomography (ERT) data, the total sulfide content and concentrations of sulfide-bound metals (Cu, Co, Fe, Mn, Ni, Pb and Zn) of tailings samples, and the resistivity and geochemistry of surface water. The resulting geophysical–geochemical model defines an area in the vadose tailings, where a low resistivity anomaly (<10 Ohm m) is correlated with the highest sulfide content, extensive sulfide oxidation and low pH (average 3.1). The physical and geochemical conditions, resulting from the oxidation of the sulfide minerals, suggest that the low resistivity anomaly is associated with acidic and metal-rich porewater (i.e., AMD). The lower resistivity values in the saturated zone of the central impoundment suggest the formation of a plume of AMD. The natural subsoil layer (silt and clay) and the bedrock surface below the tailings area were well mapped from the ERT data. The detected fracture zones of the bedrock that could work as leakage pathways for AMD were consistent with previous geological studies. The integrated methodology of the study offers a promising approach to fast and reliable monitoring of areas of potential AMD generation and its subsurface movement over large areas (ca. 9 ha). This methodology could be helpful in planning drill core sampling locations for geochemical and mineralogical analysis, groundwater sampling, and choosing and monitoring remedial programs.  相似文献   

12.
Weathering of Hitura (W Finland) nickel sulphide mine tailings and release of heavy metals into pore water was studied with mineralogical (optical and electron microscopy, X-ray diffraction) and geochemical methods (selective extractions). Tailings were composed largely of serpentine, micas and amphiboles with only minor carbonates and sulphides. Sulphides, especially pyrrhotite, have oxidized intensively in the shallow tailings in 10–15 years, but a majority of the tailings have remained unchanged. Oxidation has resulted in depletion of carbonates, slightly decreased pH, and heavy metal (Ni, Zn) release in pore water as well as in the precipitation of secondary Fe precipitates. Nevertheless, in the middle of the tailings area, where the oxidation front moves primarily downward, released heavy metals have been adsorbed and immobilized with these precipitates deeper in the oxidation zone. In contrast to what was seen in pore water pH, but in accordance with static tests of the previous studies, the neutralisation potential ratio (NPR) calculated based on the mineralogical composition and the total sulphur content suggested that tailings are ‘not potentially acid mine drainage (AMD) generating’. However, the calculated buffering capacity of the tailings resulted largely from the abundant serpentine because of the low carbonate content. Despite its slow weathering rate, serpentine may buffer the acidity to some extent through ion exchange processes in fine ground tailings. Nevertheless, in practice, acid production capacity of the tailings depends primarily on the balance between Ca–Mg carbonates and iron sulphides. NPR calculation based on carbonate and sulphur contents suggested, that the Hitura tailings are ‘likely AMD generating’. The study shows that sulphide oxidation can be significant in mobilisation of heavy metals even in apparently non-acid producing, low sulphide tailings. Therefore, prevention of oxygen diffusion into tailings is also essential in this type of sulphide tailings.  相似文献   

13.
Acid mine drainage is a major source of water pollution in the Sarcheshmeh porphyry copper mine area. The concentrations of heavy metals and rare earth elements (REEs) in the host rocks, natural waters and acid mine drainage (AMD) associated with mining and tailing impoundments are determined. Contrary to the solid samples, AMDs and impacted stream waters are enriched in middle rare earth elements (MREEs) and heavy rare earth elements (HREEs) relative to light rare earth elements (LREEs). This behavior suggests that REE probably fractionate during sulfide oxidation and acid generation and subsequent transport, so that MREE and HREE are preferentially enriched. Speciation modeling predict that the dominant dissolved REE inorganic species are Ln3+, Ln(SO4)2−, LnSO4+, LnHCO32+, Ln(CO3)2− and LnCO3+. Compared to natural waters, Sarcheshmeh AMD is enriched in REEs and SO42−. High concentrations of SO42− lead to the formation of stable LnSO4+, thereby resulting in higher concentrations of REEs in AMD samples. The model indicates that LnSO4+ is the dissolved form of REE in acid waters, while carbonate and dicarbonate complexes are the most abundant dissolved REE species in alkaline waters. The speciation calculations indicate that other factors besides complexation of the REE's, such as release of MREE from dissolution and/or desorption processes in soluble salts and poorly crystalline iron oxyhydroxy sulfates as well as dissolution of host rock MREE-bearing minerals control the dissolved REE concentrations and, hence, the MREE-enriched patterns of acid mine waters.  相似文献   

14.
矿山尾矿矿物学研究进展   总被引：5，自引：0，他引：5  
陈天虎 《安徽地质》2001,11(1):64-70
矿山尾矿由于产生大量酸性排水和释放重金属，污染地下水和地表水，破坏生态环境而成为人们关注的焦点。尾矿引起的环境问题是地表条件下，水一气一矿物复杂反应的综合结果。近年来尾矿矿物学的研究已经揭示出尾矿中矿物分解和形成的规律，水一气一矿物反应的机制和影响因素，酸性排水和重金属迁移规律，为尾矿环境危险性评价和尾矿污染防治提供了基础资料和新的思路。  相似文献   

15.
A series of experiments was conducted to better understand the bacterial influence on the release of trace metals during oxidation of sphalerite mineral and element cycles in acid mine drainage (AMD) systems. Batch experiments were carried out as biotic and abiotic control at pH 3. Acidithiobacillus ferrooxidans, sulfur and Fe(II) oxidizer, was used in the biotic sphalerite experiment. The abiotic control experiment was run without adding the bacteria. The release behavior of six trace metals (As, Cd, Co, Pb, Cu and Mn), Fe and Zn were determined during the period of 54 days. Compared to the abiotic experiments, enhanced oxidation of sphalerite by bacteria produced high sulfate (~2,000 mg/L) and Fetot (139 mg/L) along with the low pH (<2.3). Consistent with this, the concentration of trace metals (As, Cd, Co, Pb, Cu and Mn) was significantly higher in the biotic experiments than those in the abiotic experiments. Results indicate that the distributions of Co and Cd in both biotic and abiotic experiments are directly related to the sphalerite dissolution whereas Pb, Cu distribution shows no strong relation to sphalerite dissolution especially in the abiotic experiments. Pb distribution in the solution appears to be controlled by pH-dependent solubility. Approximately 80% of the trace metals were removed from the solution at the end of the biotic experiments along with biologically induced Fe precipitation. Experimental results showed that bacteria play major role not only in the release of trace metal from sphalerite but also in controlling concentration of the metals in the solution by producing Fe-oxyhydroxides. The study suggest that in order to develop an effective rehabilitation strategy for AMD, it is necessary to understand bio/geochemical processes governing mobilization and deposition of trace metals in the environment.  相似文献   

16.
A minesoil has developed over 5 years oxidative exposure on sulphide concentrate tailings (ca. 1 wt.% As) at the Macraes mesothermal gold mine, New Zealand. The minesoil has a dry crust which has formed due to evaporative drying. This dry crust is enriched in arsenic (ca. 5 wt.% As) as scorodite (FeAsO4·2H2O) because of upward mobility of dissolved arsenic during drying. Similar enrichment of arsenic has occurred along the walls of desiccation cracks which extend over 1 m into the minesoil. Capping of the tailings and minesoil with wet tailings (pH=8) results in dissolution of scorodite and remobilization of arsenic on the millimetre scale. Experimental capping of the minesoil with wet calcium carbonate remobilized some arsenic from scorodite on the centimetre scale, but much original arsenic enrichment was preserved after 400 days. A layer of gypsum (CaSO4·2H2O) and iron oxyhydroxide cementation developed at the interface between the minesoil and the experimental calcium carbonate cap, restricting water flow. This layer was ca. 1 mm thick after 400 days. Theoretical comparison between advection and diffusion in the minesoil suggests that diffusion is an important mechanism for chemical mobility on the 1–50-year time scale. However, advection can be important in secondary porosity of the dry crust of the minesoil and water penetrates this zone at a rate of 1.5 mm/day.  相似文献   

17.
This paper demonstrates the use of dissolution-rate data obtained in the laboratory to indicate the potential quality of effluent from a field-scale oxic limestone drain (OLD) treatment system for neutralization of dilute acidic mine drainage (AMD). Effluent from the Reevesdale Mine South Dip Tunnel, a large source of AMD and base flow to the Wabash Creek and Little Schuylkill River in the Southern Anthracite Coalfield of east-central Pennsylvania, is representative of AMD with low concentrations but high loadings of dissolved Fe, Al and other metals because of a high flow rate. In January 2003, rapid neutralization of the AMD from the Reevesdale Mine was achieved in laboratory tests of its reaction rate with crushed limestone in closed, collapsible containers (Cubitainers). The tests showed that net-alkaline effluent could be achieved with retention times greater than 3 h and that effluent alkalinities and associated dissolution rates were equivalent for Fe(OH)3-coated and uncoated limestone. On the basis of the laboratory results, a flushable OLD containing 1450 metric tons of high-purity calcitic limestone followed by two 0.7-m deep wetlands were constructed at the Reevesdale Mine. During the first year of operation, monthly data at the inflow, outflow and intermediate points within the treatment system were collected (April 2006–2007). The inflow to the treatment system ranged from 6.8 to 27.4 L/s, with median pH of 4.7, net acidity of 9.1 mg/L CaCO3, and concentrations of dissolved Al, Fe and Mn of 1.0, 1.9 and 0.89 mg/L, respectively. The corresponding effluent from the OLD had computed void-volume retention times of 4.5–18 h, with median pH of 6.6, net acidity of −93.2 mg/L CaCO3, and concentrations of dissolved Al, Fe and Mn of <0.1, 0.08 and 0.52 mg/L, respectively. The wetlands below the OLD were effective for retaining metal-rich solids flushed at monthly or more frequent intervals from the OLD, but otherwise had little effect on the effluent quality. During the first year of operation, approximately 43 metric tons of limestone were dissolved and 2 metric tons of Al, Fe and Mn were precipitated within the OLD. However, because of the accumulation of these metals within the OLD and possibly other debris from the mine, the effectiveness of the treatment system declined. Despite the installation of a flush-pipe network at the base of the OLD to remove precipitated solids, the limestone bed clogged near the inflow. Consequently, a large fraction of the AMD bypassed the treatment system. To promote flow through the OLD, the flush pipes were open continuously during the last 4 months of the study; however, this effluent was only partially treated because short-circuiting through the pipes decreased contact between the effluent and limestone. A reconfiguration of the flow path through the limestone bed from horizontal to vertical upward could increase the limestone surface area exposed to the metal-laden influent, increase the cross-sectional area perpendicular to flow, decrease the flow path for solids removal, and, consequently, decrease potential for clogging.  相似文献   

18.
A comparative study of sulfide mine tailings from two sites near Silver City in southwest New Mexico has shown the need for environmental monitoring in a geological context. The Cyprus-Piños Altos and Cleveland deposits consist of Cu and Zn skarn mineralization in the Piños Altos Mountains of New Mexico. Primary ore minerals in both deposits include chalcopyrite, sphalerite, and galena. The Cyprus-Piños Altos Mine ceased operation in 1995 and the Cleveland Mill closed in 1950. The deposits have similar mineralogical characteristics; however, the tailings are different in terms of age, degree of oxidation and method of disposal. The Cyprus-Piños Altos tailings (CPAT) are stored in a lined, bermed impoundment. They are dominantly water-saturated and exhibit no secondary-phase formation. The grains are not cemented and show no evidence of primary-mineral dissolution. The geochemical data show a predominantly primary signature. The tailings pond water is neutral to slightly alkaline (pH?from 7 to 8.3), partly as a result of processing methods. The Cleveland mill tailings (CMT) were deposited in a valley at the headwaters of an ephemeral stream. They are highly oxidized and differentially cemented. They have undergone numerous wet/dry cycles resulting in extensive oxidation. Secondary minerals predominate, and consist mainly of jarosite, goethite, hematite, and Fe-oxyhydroxides and -oxyhydroxysulfates. The pH of the stream draining the CMT is as high as 2.15. Maximum metal contents in the stream immediately downstream from the tailings are 5305?ppm Zn, 454?ppm Cu, 1.16?ppm Pb, 17.5?ppm Cd, 1.4?ppm As, and 0.01?ppm Hg.  相似文献   

19.
Surface alteration-layers often coat minerals in acid-mine drainage systems and the characterization of their chemical composition is required to understand the uptake or release of potentially toxic elements. Samples with micrometer-thick rock coatings were collected from bedrock in contact with three acidic tailings ponds and a small lake, all located within the Copper Cliff mine tailings disposal area in Sudbury, Ontario, Canada. Distribution and concentration of trace-metals in the rock coatings were characterized with Laser-Ablation Inductively-Coupled Plasma Mass Spectroscopy and Micro X-ray Fluorescence Spectroscopy. The rock coatings are composed of goethite, ferrihydrite, schwertmannite, jarosite and amorphous silica. The latter phase is a product of the non-stoichiometric weathering of the underlying siliceous rock. Layers within the coatings are distinguished on the basis of their atomic Fe:Si ratios: FeOx coatings have Fe:Si > 4:1, Si-FeOx coatings have Fe:Si = 4:1 to 1:1 and SiOx coatings have Si > Fe. Iron-rich coatings (FeOx) in contact with acidic tailings ponds (pH < 3.5) have lower trace-metal concentrations than their Si-rich counterparts, whereas FeOx in contact with lake water at near neutral pH have similar trace-metal concentrations than Si-FeOx and SiOx, most likely the result of higher adsorption rates of metals at near neutral pH conditions. High trace-metal concentrations in Si-FeOx and SiOx are explained by the presence of jarosite-group minerals, which formed within Si-rich alteration layers through mixing of leached alkaline cations and trace elements from the underlying rock and Fe3+-sulfate solutions from the pond. Calculated enrichment factors for trace metals and metalloids in the coatings (relative to the pond) indicate that the mobility for Pb, As, Cr and Cu in the upper part of tailings ponds is commonly lower than the mobility for Zn, Mn, Co and Ni. The environmental significance of these findings is discussed in terms of the attenuation of trace metals in the coatings and the widespread occurrences of silica gels and jarosite-group minerals.  相似文献   

20.
《Applied Geochemistry》2005,20(3):661-667
This paper describes the geochemical testing of mine tailings sourced from the Black Swan Ni Mine located near Kalgoorlie, Western Australia. Acid–base accounting was used to provide an indication of the acid generating capacity of two kinds of mining tailings: disseminated-ore tailings from the Cygnet Tailings Dam Storage Facility (CTDSF) and massive-ore tailings from the Silver Swan Tailings Dam Storage Facility (SSTDSF). All of the tailings in SSTDSF have acid generating potential which is consistent with previous research reports. New findings in this paper reveal that approximately 16% of the tailings in CTDSF have the potential to be acid generating. In contrast, previous reports state that the disseminated-ore tailings are classified as non-acid forming. Most of the potential acid generating tailings in the CTDSF are found in the upper-middle sections of the tailings profile, but some are located at the bottom of the tailings dam. The upper-middle section of the tailings is oxidized because these tailings have interacted with atmospheric O2 and rain and surface water. Oxidation of the bottom tailings in the CTDSF may be due to infiltration of ground water into hidden fractures under the east bank of CTDSF, which caused these tailings to oxidize under closed and reduced conditions.The acid drainage in the tailings dam storage facility was observed 3 a, after the development of the Black Swan Nickel project. This delayed production of acid drainage was likely due to the slow rates of acid neutralization provided by alteration gouge minerals such as Mg/Fe-carbonates (magnesite–siderite series) associated with the Ni ores. The acid drainage leaking from the tailings dams has contaminated neighboring ground water via increased acidity and heavy metals.Because of the potential acid generation in some of the disseminated ore tailings, it is inadvisable to use disseminated ore tailings as cover materials in the storage facility to isolate the underlying potentially-acid-forming tailings from O2 and water, as proposed by previous research reports.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号