首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 987 毫秒
1.
Borneo occupies a central position in the Sundaland promontory of SE Asia. It has a complex Cenozoic geological history of sedimentation and deformation which began at about the same time that India is commonly suggested to have started to collide with Asia. Some tectonic reconstructions of east and SE Asia interpret a large SE Asian block with Borneo at its centre which has been rotated clockwise and displaced southwards along major strike–slip faults during the Cenozoic due to the indentation of Asia by India. However, the geological history of Borneo is not consistent with the island simply forming part of a large block extruded from Asia. The large clockwise rotations and displacements predicted by the indentor model for Borneo are incompatible with palaeomagnetic evidence and there is no evidence that the major strike–slip faults of the Asian mainland reach Borneo. Seismic tomography shows there is a deep high velocity anomaly in the lower mantle beneath SE Asia interpreted as subducted lithosphere but it can be explained just as well by alternative tectonic models as by the indentor model. Very great thicknesses of Cenozoic sediments are present in Borneo and circum-Borneo basins, and large amounts of sediment were transported to the Crocker turbidite fan of north Borneo from the Eocene to the Early Miocene, but all evidence indicates that these sediments were derived from local sources and not from distant sources in Asia elevated by India–Asia collision. The Cenozoic geological history of Borneo records subduction of the proto-South China Sea and Miocene collision after this ocean lithosphere was eliminated, and a variety of effects resulting from long-term subduction beneath SE Asia. There is little to indicate that India–Asia collision has influenced the Cenozoic geological record in Borneo.  相似文献   

2.
We present a 3D S-velocity model for the crust and upper mantle of the South China Sea and the surrounding regions, constrained from the analysis of over 12,000 of fundamental Rayleigh wave dispersion curves between 10 s and 150 s periods. The lateral resolution was found to vary from 2° to 4° with the increasing period over the study region. A robust scheme of Debayle and Sambridge allowed us to conduct the tomographic inversion efficiently for massive datasets. Group velocity maps varying with period show lateral heterogeneities, well related to the geological and tectonic features in the study region. The 3D S-velocity model was constructed from the 1D structure inversion of the tomographic group velocity dispersion curves at each node. The obtained average crustal structure is similar to the PREM model, while the average mantle velocity is typically lower than the global average. The complicated 3D structures reveal three prominent features correlated with geological divisions: sea basin regions, island and arc regions, and continental regions. The derived crustal and lithospheric thicknesses range from ∼15 to >50 km and from ∼60 to >140 km, respectively, with the thinnest in the South China Sea, the thickest in eastern Tibet and the Yangtze Block, and the medium in the South China Fold Belt, Indochina, and island arc regions. Our results further confirm that (1) a Mesozoic subduction zone, which is interpreted as the tectonic weak zone during the Paleogene, exists along the South China margin; (2) the influence of the Indochina extrusion along the Red River Fault is limited for the South China Sea region; (3) there is a slab remnant of the proto-South China Sea beneath Borneo. New findings suggest that the Mesozoic subduction zone should be built into any evolution model for the region, as well as the other two major tectonic boundaries of the Red River Fault and proto-South China Sea subduction zone.  相似文献   

3.
南海西缘新生代沉积盆地形成动力学探讨   总被引：8，自引：3，他引：5  
通过对南海西缘新生代沉积盆地伸展作用、沉降、构造变形等特征分析,检查印支地块多条近北西向走滑断裂时间、幅度等特征以及与盆地之间联系,结果表明印度-欧亚碰撞引起的逃逸作用与南海西缘新生代盆地没有直接的成因联系;两个与俯冲有关的不同扩张机制与南海西缘新生代盆地有成因联系,即(1)太平洋板块在古新世到始新世的滚动后退,太平洋-欧亚板块汇聚速率的降低驱使这些盆地产生初始伸展作用;(2)渐新世到中中新世古南海南倾俯冲板块的拖曳力,进一步驱使这些盆地的伸展及接着的南海扩张.  相似文献   

4.
The Yinggehai basin is located on the northwestern shelf of the South China Sea. It is the seaward elongation of the Red River Fault Zone (RRFZ). The orientation and rift shape of the Yinggehai basin are mainly controlled by NW-, NNW- and nearly NS-trending basal faults. The depocenter migrated southeastward when the basin developed. The depocenter trended northwest before about 36 Ma, then jumped southward and became nearly N–S trending and migrated toward the southeast up to 21 Ma; thereafter, the depocenter trended northwest again. Based on above and structural evolution in neighbor areas, it is believed that the Yinggehai basin formation was mainly controlled by the extrusion accompanied by clockwise rotation of Indochina. We set up analogue models (thin basal plate model and thick basal plate model) to investigate the evolution of Yinggehai basin. From the experiments, we consider that the basin evolution was related to the extrusion and clockwise rotation of the Indochina block, which was caused by the collision of the Indian plate and Tibet. This process took place in four main stages: (1) Slow rifting stage (before 36 Ma) with a NW-trending depocenter; (2) rifting stage formed by sinistral slip of the Indochina block accompanied by rapid clockwise rotation between 36 and 21 Ma; (3) rifting-thermal subsidence stage affected by sinistral slip of the Indochina (21–5 Ma) block and (4) dextral strike–slip (5–0 Ma).  相似文献   

5.
Hot collisional orogens are characterized by abundant syn-kinematic granitic magmatism that profoundly affects their tectono-thermal evolutions. Voluminous granitic magmas, emplaced between 360 and 270 Ma, played a visibly important role in the evolution of the Variscan Orogen. In the Limousin region (western Massif Central, France), syntectonic granite plutons are spatially associated with major strike–slip shear zones that merge to the northwest with the South Armorican Shear Zone. This region allowed us to assess the role of magmatism in a hot transpressional orogen. Microstructural data and U/Pb zircon and monazite ages from a mylonitic leucogranite indicate synkinematic emplacement in a dextral transpressional shear zone at 313 ± 4 Ma. Leucogranites are coeval with cordierite-bearing migmatitic gneisses and vertical lenses of leucosome in strike–slip shear zones. We interpret U/Pb monazite ages of 315 ± 4 Ma for the gneisses and 316 ± 2 Ma for the leucosomes as the minimum age of high-grade metamorphism and migmatization respectively. These data suggest a spatial and temporal relationship between transpression, crustal melting, rapid exhumation and magma ascent, and cooling of high-grade metamorphic rocks.Some granites emplaced in the strike–slip shear zone are bounded at their roof by low dip normal faults that strike N–S, perpendicular to the E–W trend of the belt. The abundant crustal magmatism provided a low-viscosity zone that enhanced Variscan orogenic collapse during continued transpression, inducing the development of normal faults in the transpression zone and thrust faults at the front of the collapsed orogen.  相似文献   

6.
As a proxy for long-term lithospheric strength, detailed information on lateral effective elastic thickness (Te) variations can aid in understanding the distribution pattern of surface deformation and its response to long-term forces. Here we present high-resolution maps of spatial variations of Te for the complex SE Asian region by analyzing the coherence of topography and Bouguer gravity anomaly data. We find that after considering the gravity deficit of less dense sediment, the recovered Te maps are more representative of the geology, particularly in elongated rift basins. The results show that the Te variation pattern in SE Asia, in general, agrees well with its tectonic provinces and major tectonic boundaries. The oceanic basins, the Indosinian suture zones between the Indochina and Sibumasu blocks, and the Makassar Strait are characterized by low Te, while moderate and high Te values are recovered in the Khorat plateau, West Burma, the Singapore Ridge, the Con Song Swell, Borneo, the northern Australian margin and the Molucca Sea. The Te pattern in the south Indonesian margin is complicated by the approach and collision of oceanic plateaus and seamounts with the fore-arc region. The heterogeneous strength features are consistent with the complex assemblage of different tectonic units, and significant deformation during Cenozoic tectonic events. In the Indochina Peninsula, the extruded displacement during the India-Eurasia collision might have been partitioned and absorbed by the combined mechanism of the extrusion and viscous tectonic models. As a result, the offshore displacements of the major strike-slip faults in the South China Sea are much smaller than originally assumed, thus having less effect on the development of the South China Sea than other mechanisms such as the slab pull of the proto-South China Sea. Since the displacement driven by the boundary tectonic forces has been greatly absorbed and decreased by subduction and deformation in the active margins and adjacent weak regions, the motion velocity of the interior regions is greatly lower than the boundary active margins, and they are largely free of seismicity and volcanism. Our results suggest that East Borneo might share a similar crustal basement, and represent a broad tectonic zone of the destroyed Meso-Tethys Ocean extending from West-Middle Java, through East Borneo to northern Borneo of the Sarawak and Sabah. The Indosinian zones between the Indochina and Sibumasu blocks might extend further southeastward across Billiton Island to offshore of southern Borneo, and the Singapore platform and SW Borneo might belong to the same block. The results also show that the internal load fraction F is high in the coastal area of South China, the northern margin of the South China Sea, and the coastal area of Indochina, which, in general, agrees with the distribution of a high-velocity lower crustal layer and Late Cenozoic basaltic rocks.  相似文献   

7.
Left-lateral motion along the Ailao Shan–Red River (ASRR) Shear Zone has been widely advocated to be the result of the collision between the Indian and Eurasian plates and to account for sea-floor spreading in the South China Sea. Our new 40Ar/39Ar data on the south-easternmost outcrop of the Day Nui Con Voi metamorphic massif, northern Vietnam, suggest that the exhumation of metamorphic massif by shearing along the ASRR zone began ∼27 Ma and lasted until ∼22 Ma. A perfect correlation between location and cooling path for the samples along the shear zone suggests that the transtensional deformation may have propagated northwestward at a rate of ∼6 cm y−1. Such a good correlation also indicates that the onset of the left-lateral movement of the shear zone may have occurred later than ∼27.5 Ma. This conclusion is consistent with our previous interpretation that collision-induced southeastward extrusion of Indochina along the ASRR Shear Zone postdates the opening of the South China Sea, and that extrusion tectonics in SE China may not be responsible for the opening of the South China Sea.  相似文献   

8.
Many bends or step-overs along strike–slip faults may evolve by propagation of the strike–slip fault on one side of the structure and progressive shut-off of the strike–slip fault on the other side. In such a process, new transverse structures form, and the bend or step-over region migrates with respect to materials that were once affected by it. This process is the progressive asymmetric development of a strike–slip duplex. Consequences of this type of step-over evolution include: (1) the amount of structural relief in the restraining step-over or bend region is less than expected; (2) pull-apart basin deposits are left outside of the active basin; and (3) local tectonic inversion occurs that is not linked to regional plate boundary kinematic changes. This type of evolution of step-overs and bends may be common along the dextral San Andreas fault system of California; we present evidence at different scales for the evolution of bends and step-overs along this fault system. Examples of pull-apart basin deposits related to migrating releasing (right) bends or step-overs are the Plio-Pleistocene Merced Formation (tens of km along strike), the Pleistocene Olema Creek Formation (several km along strike) along the San Andreas fault in the San Francisco Bay area, and an inverted colluvial graben exposed in a paleoseismic trench across the Miller Creek fault (meters to tens of meters along strike) in the eastern San Francisco Bay area. Examples of migrating restraining bends or step-overs include the transfer of slip from the Calaveras to Hayward fault, and the Greenville to the Concord fault (ten km or more along strike), the offshore San Gregorio fold and thrust belt (40 km along strike), and the progressive transfer of slip from the eastern faults of the San Andreas system to the migrating Mendocino triple junction (over 150 km along strike). Similar 4D evolution may characterize the evolution of other regions in the world, including the Dead Sea pull-apart, the Gulf of Paria pull-apart basin of northern Venezuela, and the Hanmer and Dagg basins of New Zealand.  相似文献   

9.
Following final closure of the Neotethyan Ocean during the late Miocene, deformation in central Turkey has led to crustal thickening and uplift to produce the Anatolian Plateau followed by westward extrusion of terranes by strike–slip. Widespread volcanism has accompanied this latter (neotectonic) phase, and palaeomagnetic study of the volcanism shows a coherent record of differential block rotations, indicating that the Anatolian region is not a plate (or ‘platelet’) sensu stricto but is undergoing distributed internal deformation. To evaluate the scale of neotectonic rotations in the transition zone near the western limit of tectonic escape and the border of the extensional domain in central-west Turkey, we have studied the palaeomagnetism at 82 sites in volcanic suites distributed along a 140-km lineament with north–south trend and ranging in age from 18 to 8 Ma. Comparable deflection of magnetic remanence from the present field direction is identified along the full length of the lineament. A mean clockwise rotation of 12.3±4.2° is determined for this western sector of the Anatolian strike–slip province. Since similar rotations are observed in the youngest and oldest units, this cumulative rotation occurred after the late Miocene. When interpreted together with results elsewhere in Anatolia, it is inferred that the rotation is later than crustal thickening and uplift of the Anatolian Plateau and entirely a facet of the tectonic escape. Inclinations are mostly 10° shallower than the predicted Miocene field and are considered to reflect the presence of a persistent inclination anomaly in the Mediterranean region. Larger rotations departing from the regional trend are also observed within the study region, but are confined to the vicinity of major faults, notably those bounding the Afyon-Ak ehir Graben.The pattern of neotectonic declinations across Anatolia identifies strong anticlockwise rotation in the east near the Arabian pincer with progressive reduction in the amount of rotation towards the west; it becomes zero or slightly clockwise at the western extremity of the accreted terrane collage. Rotations also appear to become generally younger towards the south. Crustal deformation has therefore been distributed, and the net effect of terrane extrusion to the west and south has been to expand the curvature of the Tauride Arc. The westward radial expansion of the extruded terranes is inferred to combine with backroll on the Hellenic Arc to produce the contemporary extensional province in western Turkey.  相似文献   

10.
This paper combines geological knowledge and geophysical imagery at the crustal scale to model the 3D geometry of a segment of the Hercynian suture zone of western Europe in the Champtoceaux area (Brittany, France). The Champtoceaux complex consists of a stack of metamorphic nappes of gneisses and micaschists, with eclogite-bearing units. The exhumation of the complex, during early Carboniferous times, was accompanied by deformation during regional dextral strike–slip associated with a major Hercynian shear zone (the South Armorican Shear Zone, SASZ). Dextral shearing produced a km-scale antiformal structure with a steeply dipping axial plane and a steeply eastward plunging axis. Armor 2 deep seismic profile shows that the regional structure was cut by a set of faults with northward thrusting components. Based on the seismic constraint, direct 2D crustal-scale modelling was performed throughout the Champtoceaux fold on seven radial gravity profiles, also using geological data, and density measurements from field and drill-hole samples. The 3D integration of the cross-sections, the digitised geological map, and the structural information (foliation dips) insure the geometrical and topological consistency of all sources of data. The 2D information is interpolated to the whole 3D space using a geostatistical analysis. Finally, the 3D gravity contribution of the resulting model is computed taking into account densities for each modelled geological body and compared to the Bouguer anomaly. The final 3D model is thus compatible with the seismic and gravity data, as well as with geological data. Main geological results derived from the modelling are (i) the overall 3D geometry of the south dipping thrust system interpreted on the seismic profile emphasises northward thrusting and folding of the Champtoceaux complex which was coeval with strike–slip along the South Armorican Shear Zone; (ii) the gravity modelling suggests the presence of a relatively dense body below the Champtoceaux complex that could be interpreted as a result of relative uplift of midcrustal material during thrusting along the E–W trending wrench–thrust system; (iii) the northern limb of the Champtoceaux anticline is a relatively shallow feature; and (iv) Vigneux synkinematic granitic body is a laccolith sheared and rooted along the southern branch of the SASZ and spreads away from the strike–slip zone within weak country-rocks.  相似文献   

11.
The Iberian Chain is a wide intraplate deformation zone formed by the tectonic inversion during the Pyrenean orogeny of a Permian–Mesozoic basin developed in the eastern part of the Iberian Massif. The N–S convergence between Iberia and Eurasia from the Late Cretaceous to the Lower Miocene times produced significant intraplate deformation. The NW–SE oriented Castilian Branch of the Iberian Chain can be considered as a “key zone” where the proposed models for the Cenozoic tectonic evolution of the Iberian Chain can be tested. Structural style of basin inversion suggests mainly strike–slip displacements along previous NW–SE normal faults, developed mostly during the Mesozoic. To confirm this hypothesis, structural and basin evolution analysis, macrostructural Bouguer gravity anomaly analysis, detailed mapping and paleostress inversions have been used to prove the important role of strike slip deformation. In addition, we demonstrate that two main folding trends almost perpendicular (NE–SW to E–W and NW–SE) were simultaneously active in a wide transpressive zone. The two fold trends were generated by different mechanical behaviour, including buckling and bending under constrictive strain conditions. We propose that strain partitioning occurred with oblique compression and transpression during the Cenozoic.  相似文献   

12.
During the Paleogene the Proto-South China Sea was subducted beneath northern Borneo. Subduction ended with Early Miocene collision of the Dangerous Grounds/Reed Bank/North Palawan block and the Sabah–Cagayan Arc. Much of northern Borneo then became emergent forming the Top Crocker Unconformity. Later in the Early Miocene subsidence resumed. It is proposed that northward subduction of the Celebes Sea initiated formation of the Sulu Sea backarc basin, followed by subduction rollback to the SE. This formed a volcanic arc, which emerged briefly above sea level and collapsed in the Middle Miocene. As rollback continued the Sulu Arc was active during Middle and Late Miocene between Sabah and the Philippines. Rollback drove extension in northern Borneo and Palawan, accompanied by elevation of mountains, crustal melting, and deformation offshore. There were two important extensional episodes. The first at about 16 Ma is marked by the Deep Regional Unconformity, and the second at about 10 Ma produced the Shallow Regional Unconformity. Both episodes caused exhumation of deep crust, probably on low angle detachments, and were followed by granite magmatism. The NW Borneo–Palawan Trough and offshore Sabah fold and thrust belt are often interpreted as features resulting from collision, regional compression or subduction. However, there is no seismicity, dipping slab or volcanicity indicating subduction, nor obvious causes of compression. The trough developed after the Middle Miocene and is not the position of the Paleogene trench nor the site of Neogene subduction. Inboard of the trough is a thick sediment wedge composed of an external fold and thrust belt and internal extensional zone with structures broadly parallel to the trough. The trough is interpreted as a flexural response to gravity-driven deformation of the sediment wedge, caused by uplift on land that resulted from extension, with a contribution of deep crustal flow.  相似文献   

13.
We conducted a seismic tomographic analysis to estimate the crustal structure beneath the Shikoku and Chugoku regions in Japan. The Philippine Sea slab (PHS slab) subducts continuously in a SE–NW direction beneath this region, and the crustal structure is complex. Furthermore, the Median Tectonic Line (MTL), one of the longest and most active arc-parallel fault systems in Japan (hereafter, the MTL active fault system), is located in this area, and the right-lateral strike–slip movement of this fault system is related to the oblique subduction of the PHS slab. The MTL active fault system has ruptured repeatedly during the last 10 000 years, and has high seismic potential. Our tomographic analysis clarified the heterogeneous crustal structure along the MTL active fault system. This fault system in Shikoku can be divided into two segments, an east segment and a west segment, on the basis of the velocity structure. This segmentation model is consistent with other such models that have been determined from geological and geomorphological data such as fault geometry, slip rate, and faulting history. This consistency suggests that the surface characteristics of the MTL active fault system are related to structural properties of the crust. In particular, a prominent low-velocity (low-V) zone is present in the lower crust beneath the east segment. Our tomographic images show that the lower crust structure beneath the east segment is obviously different from that of the other segment. Furthermore, this low-V zone may indicate the presence of fluid, possibly related to dehydration of the PHS slab. As the presence of fluid in the lower crust affects the activity of the fault, stress accumulation and the fault failure mechanism may differ between the two segments of the MTL active fault system.  相似文献   

14.
<正>The Ailao Shan-Red River fault zone is the boundary between the Yangtze block to the northeast and the Indochina block to the southwest.It is an important tectonic zone due to its role in the southeastward extrusion of the Indochina block during and subsequent to the Indian-Eurasian collision.Diancang Shan(DCS) high-grade metamorphic complex,located at the northwest extension along the Ailao Shan-Red River(ASRR) shear zone,is a representative metamorphic complex of the ASRR tectonic belt.Structural and microstructural analysis of sheared rocks in the high-grade metamorphic rocks reveals that they are coherent with solid-state high-temperature ductile deformation,which is attributed to left-lateral shearing along the ASRR shear zone.New LA-ICP-MS zircon U-Pb geochronological and microstructural studies of the post-kinematic granitic plutons provide a straightforward time constraint on the termination ductile left-lateral shearing and exhumation of the metamorphic massif in the ASRR shear zone.It is suggested that the left-lateral shearing along the ASRR shear zone ended at ca.21 Ma at relative lower-temperature or decreasing temperature conditions.During or after the emplacement of the young dikes at ca.21 Ma,rapid brittle deformation event occurred,which makes the DCS massif start fast uplift/exhumation and cooling to a shallow crustal level.  相似文献   

15.
We present a revision and a seismotectonic interpretation of deep crust strike–slip earthquake sequences that occurred in 1990–1991 in the Southern Apennines (Potenza area). The revision is motivated by: i) the striking similarity to a seismic sequence that occurred in 2002  140 km NNW, in an analogous tectonic context (Molise area), suggesting a common seismotectonic environment of regional importance; ii) the close proximity of such deep strike–slip seismicity with shallow extensional seismicity (Apennine area); and iii) the lack of knowledge about the mechanical properties of the crust that might justify the observed crustal seismicity. A comparison between the revised 1990–1991 earthquakes and the 2002 earthquakes, as well as the integration of seismological data with a rheological analysis offer new constraints on the regional seismotectonic context of crustal seismicity in the Southern Apennines. The seismological revision consists of a relocation of the aftershock sequences based on newly constrained velocity models. New focal mechanisms of the aftershocks are computed and the active state of stress is constrained via the use of a stress inversion technique. The relationships among the observed seismicity, the crustal structure of the Southern Apennines, and the rheological layering are analysed along a crustal section crossing southern Italy, by computing geotherms and two-mechanism (brittle frictional vs. ductile plastic strength) rheological profiles. The 1990–1991 seismicity is concentrated in a well-defined depth range (mostly between 15 and 23 km depths). This depth range corresponds to the upper pat of the middle crust underlying the Apulian sedimentary cover, in the footwall of the easternmost Apennine thrust system. The 3D distribution of the aftershocks, the fault kinematics, and the stress inversion indicate the activation of a right-lateral strike–slip fault striking N100°E under a stress field characterized by a sub-horizontal N142°-trending σ1 and a sub-horizontal N232°-trending σ3, very similar to the known stress field of the Gargano seismic zone in the Apulian foreland. The apparent anomalous depths of the earthquakes (> 15 km) and the confinement within a relatively narrow depth range are explained by the crustal rheology, which consists of a strong brittle layer at mid crustal depths sandwiched between two plastic horizons. This articulated rheological stratification is typical of the central part of the Southern Apennine crust, where the Apulian crust is overthrusted by Apennine units. Both the Potenza 1990–1991 and the Molise 2002 seismic sequences can be interpreted to be due to crustal E–W fault zones within the Apulian crust inherited from previous tectonic phases and overthrusted by Apennine units during the Late Pliocene–Middle Pleistocene. The present strike–slip tectonic regime reactivated these fault zones and caused them to move with an uneven mechanical behaviour; brittle seismogenic faulting is confined to the strong brittle part of the middle crust. This strong brittle layer might also act as a stress guide able to laterally transmit the deviatoric stresses responsible for the strike–slip regime in the Apulian crust and may explain the close proximity (nearly overlapping) of the strike–slip and normal faulting regimes in the Southern Apennines. From a methodological point of view, it seems that rather simple two-mechanism rheological profiles, though affected by uncertainties, are still a useful tool for estimating the rheological properties and likely seismogenic behaviour of the crust.  相似文献   

16.
After the 2005 Kashmir earthquake, we mapped surface ground fractures in Tangdhar, Uri, Rajouri and Punch sectors and liquefaction features in Jammu area lying close to the eastern side of the Line of Control (LOC) in Kashmir, India. The NW trending ground fractures occurred largely in the hanging wall zone of the southeastern extension of the causative fault in Tangdhar and Uri sectors. The principal compressive stress deduced from the earthquake induced ground fractures is oriented at N10°, whereas the causative Balakot–Bagh fault strikes 330°. The fault-plane solution indicates primarily SW thrusting of the causative fault with a component of strike–slip motion. The ground fractures reflect pronounced strike–slip together with some tensile component. The Tangdhar area showing left-lateral strike–slip motion lies on the hanging wall, and the Uri region showing right-lateral strike–slip movement is located towards the southeastern extension of the causative fault zone. The shear fractures are related to static stress that was responsible for the failure of causative fault. The tensile fractures with offsets are attributed to combination of both static and dynamic stresses, and the fractures and openings without offsets owe their origin due to dynamic stress. In Punch–Rajouri and Jammu area, which lies on the footwall, the fractures and liquefactions were generated by dynamic stress. The occurrence of liquefaction features in the out board part of the Himalayan range front near Jammu is suggestive of stress transfer  230 km southeast of the epicenter. The Balakot–Bagh Fault (BBF), the Muzaffarabad anticline, the rupture zone of causative fault and the zone of aftershocks — all are aligned in a  25 km wide belt along the NW–SE trending regional Himalayan strike of Kashmir region and lying between the MBT and the Riasi Thrust (Murree Thrust), suggesting a seismogenic zone that may propagate towards the southeast to trigger an earthquake in the eastern part of the Kashmir region.  相似文献   

17.
南沙海区及其周缘中-新生代岩浆活动及构造意义   总被引：16，自引：3，他引：13  
通过对南沙海区及其周缘地区中-新生代以来4个主要地质时期即燕山期、喜山早期、喜山晚期一幕和二幕各种类型岩浆岩的发育特征(包括时空分布、地球化学及构造环境)的综合分析,重构了研究区中-新生代岩浆活动的演化历程:燕山期(侏罗纪到白垩纪)在南沙西面和西南面陆区以中酸性岩浆活动为主,代表中生代东亚陆缘火山岩带的南段。同时在南沙与加里曼丹之间广泛发育的是基性-超基性岩,是在俯冲过程中折返到浅部的古南海洋壳碎片。喜山早期(古新世至始新世)岩浆活动微弱。喜山晚期一幕(晚渐新世至中中新世)在加里曼丹—卡加延一带岩浆活动相对重新活跃,西段主要有英安岩、花岗闪长岩、安山岩、闪长岩等,东段主要为玄武安山岩,但规模较小,似乎不足以构成与古南海俯冲伴生的火山岩带。喜山晚期二幕(晚中新世至第四纪)岩浆活动出现高峰,为大规模的中基性火山喷发,与燕山期及喜山早期截然不同,在中南半岛南部和加里曼丹岛中-北部尤为广泛,可能是该区出现上涌的地幔热团的指示。  相似文献   

18.
The Dead Sea basin is often cited as one of the classic examples for the evolution of pull-apart basins along strike–slip faults. Despite its significance, the internal structure of the northern Dead Sea basin has never been addressed conclusively. In order to produce the first comprehensive, high-resolution analysis of this area, all available seismic data from the northern Dead Sea (lake)–lower Jordan valley (land) were combined. Results show that the northern Dead Sea basin is comprised of a system of tectonically controlled sub-basins delimited by the converging Western and Eastern boundary faults of the Dead Sea fault valley. These sub-basins grow shallower and smaller to the north and are separated by structural saddles marking the location of active transverse faults. The sedimentary fill within the sub-basins was found to be relatively thicker than previously interpreted. As a result of the findings of this study, the “classic” model for the development of pull-aparts, based on the Dead Sea, is revised. The new comprehensive compilation of data produced here for the first time was used to improve upon existing conceptual models and may advance the understanding of similar basinal systems elsewhere.  相似文献   

19.
Northern Apulia is an emerged portion of the Adriatic microplate, representing the foreland–foredeep area of a stretch of the Apennine chain in southern Italy. The interaction between the relatively rigid microplate and the contiguous more deformable domains is responsible for the intense seismicity affecting the chain area. However strong, sometimes even disastrous, earthquakes have also hit northern Apulia on several occasions. The identification of the causative faults of such events is still unclear and different hypotheses have been reported in literature. In order to provide guidelines and constraints in the search for these structures, a comprehensive re-examination and reprocessing of all the available seismic data has been carried out taking into consideration 1) the characteristics of historical events, 2) the accurate relocation of events instrumentally recorded in the last 20 years, 3) the determination of focal mechanisms and of the regional stress tensor.The results obtained bring to light a distinction between the foreland and foredeep areas. In the first region there is evidence of a regional stress combining NW compression and NE extension, thus structures responsible for major earthquakes should be searched for among strike–slip faults, possibly with a slight transpressive character. These structures could be either approximately N–S oriented sinistral or E–W dextral faults. In the foredeep region there is a transition toward transtensive mechanisms, with strikes similar to those of the previous zone, or maybe also towards NW oriented normal faults, more similar to those prevailing in the southern Apennine chain in relation to a dominant NE extension; this appears to be the effect of a reduction of the NW compression, probably due to a decrease in efficiency of stress transmission along the more tectonised border of the Adriatic microplate.  相似文献   

20.
Makkah and central Red Sea regions have been re-evaluated from recent earthquake data analysis. Epicenters of recent seismic activity are concentrated in three local seismic zones. These are Ad Damm fault (NE), Nu’man–Makkah–Fatima (NW), and Jeddah-Red Sea (NW) seismic zones. Moreover, an extended seismic zone along the central part of Red Sea is observed. Most of these epicenters are distributed along tectonic faults, as indicated from the subsurface structure analysis of the aeromagnetic anomaly map. Some epicenters of small magnitudes are inaccurately located. The study indicates the existence of large active structural basin south of Makkah region, which traverse Ad Damm fault zone with the Red Sea transform faults. Slip vector analyses were carried out for 50 available earthquake focal mechanisms around Makkah region. In Nu’man, Makkah, and Fatima structural zones, the slip vectors generally trend NW and NNW. However, in the southern part at the Ad Dam structure zone, the slip vector trends NE–SW. These may result from the current complicated drifting motion of Arabian plate away from African plate combined with the opening of the Red Sea rift.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号