首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
宁芜玢岩铁矿磷灰石的稀土元素特征   总被引：12，自引：2，他引：12  
文章分析了宁芜玢岩铁矿 4种产状磷灰石的稀土元素组成 ,并与Kiruna型铁矿和斜长岩、苏长岩及钛铁霞辉岩中磷灰石的稀土元素组成进行了对比。结果表明产地和母岩不同的矿床中 ,它们的磷灰石稀土元素分布型式一致 ,以轻稀土富集和Eu负异常明显为特征 ,属陆相岩浆成因。前 3种产状磷灰石的ΣREE变化于 30 31.48×10 -6～ 12 0 80× 10 -6,第 4种产状磷灰石的ΣREE仅为 195 8× 10 -6,反映岩浆演化到热液的晚期阶段成矿溶液稀土元素含量较低。尽管辉长闪长玢岩与磷灰石的稀土元素分布型式一致 ,但辉长闪长玢岩无Eu异常或有弱Eu正异常 ,代表它们的地幔源区低氧逸度的还原环境 ,或反映氧逸度较高情况下的分离结晶作用。不混溶作用形成的矿浆在冷凝过程中 ,Eu2 + 优先被透辉石捕获 ,使得稍晚结晶的磷灰石产生负Eu异常  相似文献   

2.
Sodic–calcic alteration is common in mineralized hydrothermal systems, yet the relative importance of igneous vs. basinal fluid sources remains controversial. One of the most extensive volumes of sodic–calcic rocks occurs near Cloncurry, NW Queensland, and was formed by overlapping hydrothermal systems that were active synchronously with emplacement of mid‐crustal batholithic granitoids (c. 1.55–1.50 Ga). Altered rocks contain albite–oligoclase, actinolite, diopside, titanite and magnetite. Alteration was localized by: (A) composite veins and breccias containing crystallized magma intimately intergrown with hydrothermal precipitates; (B) intrusions that host setting A veins and breccias; and (C) extensive breccia and vein systems linked to regional fault systems. Isotope analyses of actinolites in settings A and B indicate calculated δ18OH2O (+8.2 to +10.6‰) and variably depleted δDH2O (?130 to ?54‰) compared with typical magmatic fluids, whereas those from setting C typically indicate calculated δ18OH2O (+8.0 to +12.8‰) and δDH2O (?29 to ?99‰). The lowest δDH2O values are interpreted as representing residual fluids after significant (> 90%) open‐system magmatic degassing. Overall the stable isotope, field, geochronological and geobarometric data suggest that these sodic–calcic alteration systems were formed by the episodic incursion of magmatic fluids that underwent minor isotopic modification as a result of varying degrees of interaction with country rocks.  相似文献   

3.
Quartz–sillimanite segregations, quartz–albite lithologies (Ab95–98), and Kiruna‐type low‐Ti iron‐oxide deposits are associated with late‐ to post‐tectonic (c. 1055 Ma) leucogranites of Lyon Mountain Gneiss (LMG) in the Adirondack Mountains, New York State. Most recent interpretations of these controversial features, which are global in occurrence, favour hydrothermal origins in agreement with results presented here. Field relations document that quartz–sillimanite veins and nodules cut, and therefore post‐date, emplacement of host LMG leucogranites. Veins occur in oriented fracture networks, and aligned trains of nodules are interpreted as disrupted early veins. Late dykes of leucogranite cut veins and nodules demonstrating formation prior to terminal magmatism. Veins and nodules consist of sillimanite surrounded by quartz that commonly embays wall‐rock feldspar indicating leaching of Na and K from LMG feldspar by acidic hydrothermal fluids. Subsequent, and repeated, ductile flow disrupted earlier veins into nodular fragments but produced little grain shape fabric. Geochemical and petrographic studies of quartz–albite rock indicate that it formed through metasomatic replacement (albitization) of LMG microperthite by sodic hydrothermal fluids that resulted in diagnostic checkerboard albite. Low‐Ti iron‐oxide ores are commonly associated with the quartz–albite sub‐unit, and it is proposed that hydrothermal fluids related to albitization transported Fe as well. The regional extent of sodic alteration suggests large quantities of surface‐derived hydrothermal fluids. Fluid inclusion and oxygen isotope data are consistent with high temperature, regionally extensive fluids consisting primarily of evolved surface‐derived brines enriched in Na and Cl. Quartz–sillimanite veins and nodules, which are significantly more localised phenomena and require acidic fluids, were most likely formed from local magmatic fluids in the crystallizing carapaces of LMG plutons.  相似文献   

4.
New fieldwork, mineralogical and geochemical data and interpretations are presented for the rare-metal bearing A-type granites of the Aja intrusive complex(AIC) in the northern segment of the Arabian Shield. This complex is characterized by discontinuous ring-shaped outcrops cut by later faulting. The A-type rocks of the AIC are late Neoproterozoic post-collisional granites, including alkali feldspar granite, alkaline granite and peralkaline granite. They represent the outer zones of the AIC, surrounding a core of older rocks including monzogranite, syenogranite and granophyre granite. The sharp contacts between A-type granites of the outer zone and the different granitic rocks of the inner zone suggest that the AIC was emplaced as different phases over a time interval, following complete crystallization of earlier batches. The A-type granites represent the late intrusive phases of the AIC, which were emplaced during tectonic extension, as shown by the emplacement of dykes synchronous with the granite emplacement and the presence of cataclastic features. The A-type granites consist of K-feldspars, quartz, albite, amphiboles and sodic pyroxene with a wide variety of accessory minerals, including Fe-Ti oxides, zircon, allanite, fluorite, monazite, titanite, apatite, columbite, xenotime and epidote. They are highly evolved(71.3–75.8 wt% SiO_2) and display the typical geochemical characteristics of post-collisional, within-plate granites. They are rare-metal granites enriched in total alkalis, Nb, Zr, Y, Ga, Ta, REE with low CaO, MgO, Ba, and Sr. Eu-negative anomalies(Eu/Eu* = 0.17–0.37) of the A-type granites reflect extreme magmatic fractionation and perhaps the effects of late fluid-rock interactions. The chemical characteristics indicate that the A-type granites of the AIC represent products of extreme fractional crystallization involving alkali feldspar, quartz and, to a lesser extent, ferromagnesian minerals. The parent magma was derived from the partial melting of a juvenile crustal protolith with a mantle contribution. Accumulation of residual volatile-rich melt and exsolved fluids in the late stage of the magma evolution produced pegmatite and quartz veins that cut the peripheries of the AIC. Post-magmatic alteration related to the final stages of the evolution of the A-type granitic magma, indicated by alterations of sodic amphibole and sodic pyroxene, hematitization and partial albitization.  相似文献   

5.
The Chadormalu is one of the largest known iron deposits in the Bafq metallogenic province in the Kashmar-Kerman belt, Central Iran. The deposit is hosted in Precambrian-Cambrian igneous rocks, represented by rhyolite, rhyodacite, granite, diorite, and diabasic dikes, as well as metamorphic rocks consisting of various schists. The host rocks experienced Na (albite), calcic (actinolite), and potassic (K-feldspar and biotite) hydrothermal alteration associated with the formation of magnetite–(apatite) bodies, which are characteristic of iron oxide copper-gold (IOCG) and iron oxide-apatite (IOA) systems. Iron ores, occurring as massive-type and vein-type bodies, consist of three main generations of magnetite, including primary, secondary, and recrystallized, which are chemically different. Apatite occurs as scattered irregular veinlets in various parts of the main massive ore-body, as well as apatite-magnetite veins and disseminated apatite grains in marginal parts of the deposit and in the immediate wall rocks. Minor pyrite occurs as a late phase in the iron ores. Chemical composition of magnetite is representative of an IOA or Kiruna-type deposit, which is consistent with other evidence.Whole rock geochemical data from various host rocks confirm the occurrence of Na, Ca, and K alteration consistent with the formation of albite, actinolite, and K-feldspar, respectively. The geochemical investigation also includes the nature of calc-alkaline igneous rocks, and helps elaborating on the spatial and temporal association, and possible contribution of mafic to felsic magmas to the evolution of ore-bearing hydrothermal fluids.Fluid inclusion studies on apatites from massive- and vein-type ores show a range of homogenization temperatures from 266 to 580 °C and 208–406 °C, and salinities from 0.5 to 10.7 wt.% and 0.3–24.4 wt.% NaCl equiv., respectively. The fluid inclusion data suggest the involvement of evolving fluids, from low salinity-high temperature, to high salinity-low temperature, in the formation of the massive- and vein-type ores, respectively. The δ34S values obtained for pyrite from various parts of the deposit range between +8.9 and +14.4‰ for massive ore and +18.7 to +21.5‰ for vein-type ore. A possible source of sulfur for the 34S-enriched pyrite would be originated from late Precambrian-early Cambrian marine sulfate, or fluids equilibrated with evaporitic sulfates.Field observations, ore mineral and alteration assemblages, coupled with lithogeochemical, fluid inclusion, and sulfur isotopic data suggest that an evolving fluid from magmatic dominated to surficial brine-rich fluid has contributed to the formation of the Chadormalu deposit. In the first stages of mineralization, magmatic derived fluids had a dominant role in the formation of the massive-type ores, whereas a later brine with higher δ34S contributed to the formation of the vein-type ores.  相似文献   

6.
Four types of apatite have been identified in the Ningwu region.The first type of apatite is widely distributed in the middle dark colored zones(i.e.iron ores) of individual deposits.The assemblage includes magnetite,apatite and actinolite(or diopside).The second type occurs within magnetite-apatite veins in the iron ores.The third type is seen in magnetite-apatite veins and (or) nodules in host rocks(i.e.gabbro-diorite porphyry or gabbro-diorite or pyroxene diorite).The fourth type occurs within apatite-pyrite-quartz veins filling fractures in the Xiangshan Group.Rare earth elements (REE) geochemistry of apatite of the four occurrences in porphyry iron deposits is presented.The REE distribution patterns of apatite are generally similar to those of apatites in the Kiruna-type iron ores,nelsonites.They are enriched in light REE,with pronounced negative Eu anomalies.The similarity of REE distribution patterns in apatites from various deposits in different locations in the world indicates a common process of formation for various ore types,e.g. immiscibility.Early magmatic apatites contain 3031.48-12080×10~(-6) REE.Later hydrothermal apatite contains 1958×10~(-6) REE,indicating that the later hydrothermal ore-forming solution contains lower REE.Although gabbro-diorite porphyry and apatite show similar REE patterns,gabbro-diorite porphyries have no europium anomalies or feeble positive or feeble negative europium anomalies, caused both by reduction environment of mantle source region and by fractionation and crystallization(immiscibility) under a high oxygen fugacity condition.Negative Eu anomalies of apatites were formed possibly due to acquisition of Eu~(2+) by earlier diopsite during ore magma cooling. The apatites in the Aoshan and Taishan iron deposits yield a narrow variation range of ~(87)Sr/~(86)Sr values from 0.7071 to 0.7073,similar to those of the volcanic and subvolcanic rocks,indicating that apatites were formed by liquid immiscibility and differentiation of intermediate and basic magmas.  相似文献   

7.
The stability of pumpellyite + actinolite or riebeckite + epidote + hematite (with chlorite, albite, titanite, quartz and H2O in excess) mineral assemblages in LTMP metabasite rocks is strongly dependent on bulk composition. By using a thermodynamic approach (THERMOCALC), the importance of CaO and Fe2O3 bulk contents on the stability of these phases is illustrated using P–T and P–X phase diagrams. This approach allowed P–T conditions of ～4.0 kbar and ～260 °C to be calculated for the growth of pumpellyite + actinolite or riebeckite + epidote + hematite assemblages in rocks containing variable bulk CaO and Fe2O3 contents. These rocks form part of an accretionary wedge that developed along the east Australian margin during the Carboniferous–Triassic New England Orogen. P–T and P–X diagrams show that sodic amphibole, epidote and hematite will grow at these conditions in Fe2O3‐saturated (6.16 wt%) metabasic rocks, whereas actinolite and pumpellyite will be stable in CaO‐rich (10.30 wt%) rocks. With intermediate Fe2O3 (～3.50 wt%) and CaO (～8.30 wt%) contents, sodic amphibole, actinolite and epidote can coexist at these P–T conditions. For Fe2O3‐saturated rocks, compositional isopleths for sodic amphibole (Al3+ and Fe3+ on the M2 site), epidote (Fe3+/Fe3+ + Al3+) and chlorite (Fe2+/Fe2+ + Mg) were calculated to evaluate the efficiency of these cation exchanges as thermobarometers in LTMP metabasic rocks. Based on these calculations, it is shown that Al3+ in sodic amphibole and epidote is an excellent barometer in chlorite, albite, hematite, quartz and titanite buffered assemblages. The effectiveness of these barometers decreases with the breakdown of albite. In higher‐P stability fields where albite is absent, Fe2+‐Mg ratios in chlorite may be dependent on pressure. The Fe3+/Al and Fe2+/Mg ratios in epidote and chlorite are reliable thermometers in actinolite, epidote, chlorite, albite, quartz, hematite and titanite buffered assemblages.  相似文献   

8.
Abstract: The North granitic body of the Miyako pluton is located in the Northern Kitakami belt, Northeast Japan. The formation of the scheelite–chalcopyrite–magnetite–bearing aplitic veins and scheelite–chalcopyrite–magnetite–bearing Yamaguchi skarn deposit was closely associated with the formation of the Miyako plutons. Petrographic facies of the North granitic body vary from quartz diorite in marginal zone (zone A), to tonalite and granodiorite (zone B), and to granite (zone C) in the central. The large numbers of aplitic veins distributed around the Yamaguchi mining area are divided into two groups: barren and scheelite–mag–netite–chalcopyrite–bearing aplitic veins. The latter cut massive clinopyroxene skarns of the Yamaguchi deposit, and are composed of plagioclase, K‐feldspar and titanite. Some plagioclase crystals have dusty cores with irregularly shaped K‐feldspar flakes, and clear rims of albite. Textures of plagioclase in the mineralized aplitic veins are different from the idiomorphic textures with sharp plagioclase crystal boundaries that occur in the North granitic body and barren aplitic veins. These textural data suggest that the mineralized aplitic veins were formed from hydrothermal fluid. Changes in the contents of major and minor (Rb, Sr, Sc, Co, Th, U) elements in the North Miyako granitic body are similar to those of zoned plutons formed by typical magmatic differentiation processes. On the other hand, concentrations of REE, especially middle to heavy REE, of granitic rocks in zone C and barren aplitic veins are significantly lower than those of granitic rocks in zones A and B. The hypothetical chondrite‐normalized REE patterns, calculated assuming fractional crystallization from zone B granitic melt, suggest that REE concentrations of the residual melt increased with the degree of fractional crystallization, and changed into a pattern with enriched LREE and strongly negative Eu anomaly. However, the REE patterns of granitic rocks in zone C are different from the hypothetical patterns. Moreover, the REE patterns of magnetite–scheelite–chalcopyrite aplitic veins are quite different from those of granitic rocks. The Cu contents of granitic rocks in the North Miyako body increase from zone A (5–26 ppm) to zone B (10–26 ppm), and then clearly decrease to zone C (5–7 ppm) and drastically increase to the barren aplitic veins (39–235 ppm). Concentrations of Cu in the mineralized aplitic veins are also higher than those of the granitic rocks in zone C. The decrease in REE and Cu contents of granitic rocks from zone B to zone C is not a result of simple magmatic fractional differentiation. Fluid inclusions in quartz from mineralized aplitic veins contain 3.3 wt% NaCl equivalent and 5.8 wt% CO2. It was also demonstrated experimentally that the removal of MREE and HREE by fluid from melt enabled the formation of complexes of REE and ligands of OH‐ and CO32‐. Based on the possibility that the melt of the granitic rocks of zone C and the mineralized aplitic veins coexisted with CO2‐bearing fluid, it is thought that REE were extracted from the melt to the CO2‐bearing fluid, and that the REE in the mineralized aplitic veins were transported by the CO2‐bearing fluid. It is likely that the low HREE and Cu contents of the granitic rocks in zone C could have been caused by the removal of those elements from the granitic melt by the fluid coexisting with the melt. The expelled materials could have been the sources of scheelite–magnetite–chalcopyrite–bearing aplitic veins and copper mineralization of the Yamaguchi Cu‐W skarn deposit.  相似文献   

9.
对东秦岭地区河南嵩县一带进行地质调查,发现了一系列具有一定规模的含稀土碱性碳酸岩矿脉并在其中发现一种特殊的钡解石矿物。依据该钡解石主量元素组成,计算分子式为Ba_1._(04) Ca_0._(81)Sr_(0.14)(CO_3)_2,为锶钡解石,LA-ICP-MS分析表明其富Na、K、Mn、Pb、REE、Y等元素,稀土元素总量最高为4 080×10-6,总体表现为轻稀土元素富集、重稀土元素亏损。该矿物与常见于沉积岩中的钡解石存在显著差别。钡解石呈现出与霓辉石共生(钡解石正晶型,霓辉石围绕钡解石生长;霓辉石正晶型,钡解石围绕霓辉石生长),或与石英、方解石、磷灰石共生(它形)两种状态。早期方解石与钡解石共生,形成于碱性岩演化早期的碳酸盐与硅酸盐不混溶阶段;晚期方解石则以布丁状分布于钡解石和霓辉石中,为碳酸盐交代阶段产物。霓辉石、钾长石、钠长石、辉石、磷灰石、方解石、石英和钡解石共生的组合与已知火成碳酸岩的矿物组合相似。该区碳酸岩富集REE、Ba和Sr,与已知大型富稀土碳酸岩矿床(如牦牛坪稀土矿)特征一致。结合已发现矿脉地质特征,认为该区有较大的成矿潜力,为东秦岭地区寻找火成岩型稀土矿提供了依据。  相似文献   

10.
Cihai and Cinan are Permian magnetite deposits related to mafic-ultramafic intrusions in the Beishan region, Xinjiang, NW China. The Cihai mafic intrusion is dominantly composed of dolerite, gabbro and fine-grained massive magnetite ore, while gabbro, pyrrhotite + pyrite-bearing clinopyroxenite and magnetite ore comprise the major units in Cinan. Clinopyroxene occurs in both deposits as 0.1–2 mm in diameter subhedral to anhedral grains in dolerite, gabbro and clinopyroxenite. High FeO contents (11.7–28.9 wt%), low SiO2 (43.6–54.3 wt%) and Al2O3 contents (0.15–6.08 wt%), and low total REE and trace element contents of clinopyroxene in the Cinan clinopyroxenite imply crystallization early, at high pressure. This clinopyroxene is FeO-rich and Si and Ti-poor, consistent with the clinopyroxene component of large-scale Cu-Ni sulfide deposits in the Eastern Tianshan and Panxi ares, as well as Tarim mafic intrusion and basalt, implying the Cinan mafic intrusion and sulfide is related to tectonic activity in the Tarim LIP. The similar mineral chemistry of clinopyroxene, apatite and magnetite in the Cihai and Cinan gabbros (e.g., depleted LREE, negative Zr, Hf, Nb and Ta anomalies in clinopyroxene, lack of Eu anomaly in apatite and similarity of oxygen fugacity as indicated by V in magnetite), indicate similar parental magmatic characteristics. Mineral compositions suggest a crystallization sequence of clinopyroxenite/with a small amount of sulfide – gabbro – magnetite ore in the Cinan deposit, and magnetite ore – gabbro – dolerite in Cihai. The basaltic magma was emplaced at depth, with magnetite segregation (and formation of the Cinan magnetite ores) occurring in relatively low fO2 conditions, after clinopyroxenite and gabbro fractional crystallization. The evolved Fe-rich basaltic magma rapidly rose to intermediate or shallow depths, forming an immiscible Fe-Ti oxide magma as fO2 increased and leaving a Fe-poor residual magma in the chamber. The residual magmas was emplaced at different levels in the crust, forming the Cihai gabbro and dolerite, respectively. Finally, the immiscible Fe-Ti oxide magma was emplaced into the earlier formed dolerite because of late magma pulse uplift, resulting in a distinct boundary between the magnetite ores and dolerite.  相似文献   

11.
Apatites of representative magnetite‐series and ilmenite‐series granitoids were studied in the Japanese Islands. Concentrations of the volatile components F, Cl and SO3 are differently distributed in apatites of these granitoid series. Apatites are always fluoroapatite. They have weakly higher F content in the ilmenite series than in the magnetite series. In contrast, Cl and SO3, are significantly concentrated in apatites of the magnetite series compared to the ilmenite series. These characteristics reflect the original concentrations of these components in the host granitic magmas. A high fO2 seems most important for the S‐concentration as sulfate in apatite of the magnetite series. REE and Y are only erratically high in the studied apatites.  相似文献   

12.
The Taihe intrusion is one of the layered intrusions situated in the central zone of the Emeishan Large Igneous Province (ELIP), SW China. The cyclic units in the Middle Zone of the intrusion are composed of apatite-magnetite clinopyroxenite at the base and gabbro at the top. The apatite-rich oxide ores contain 6–12 modal% apatite and 20–50 modal% Fe-Ti oxides evidently distinguished from the coeval intrusions in which apatite-rich rocks are poor in Fe-Ti oxides. Most of apatites of the Taihe Middle and Upper Zones are fluorapatite, although four samples show slightly high Cl content in apatite suggesting that they crystallize from a hydrous parental magma. Compared to the apatite from the gabbro of the Panzhihua intrusion, situated 100 km to the south of the Taihe intrusion, the apatite of the Taihe rocks is richer in Sr and depleted in HREE relative to LREE. The calculated magma in equilibrium with apatite of the Taihe Middle and Upper Zones also shows weakly negative Sr anomalies in primitive mantle normalized trace element diagrams. These features indicate that the apatite of the Taihe Middle and Upper Zones crystallizes after clinopyroxene and before plagioclase. The apatite of the Taihe Middle and Upper Zones shows weakly negative Eu anomalies suggesting a high oxygen fugacity condition. The high iron and titanium contents in the oxidizing magma result in crystallization of Fe-Ti oxides. Crystallization of abundant Fe-Ti oxides and clinopyroxenes lowers the solubility of phosphorus and elevates SiO2 concentration in the magma triggering the saturation of apatite. The positive correlations of Sr, V, total REE contents and Ce/Yb ratio in apatite with cumulus clinopyroxene demonstrate approximately compositional equilibrium between these phases suggesting they crystallized from the same ferrobasaltic magma. Early crystallization and accumulation of Fe-Ti oxide together with apatite produced the apatite-rich oxide ores at the base of the cyclic units of the Taihe Middle Zone.  相似文献   

13.
The uncommon Mg-rich and Ti-poor Zhaoanzhuang serpentine-magnetite ores within Taihua Group of the North China Craton(NCC) remain unclear whether the protolith was sourced from ultramafic rocks or chemical sedimentary sequences. Here we present integrated petrographic and geochemical studies to characterize the protoliths and to gain insights on the ore-forming processes. Iron ores mainly contain low-Ti magnetite(TiO_2 ~0.1 wt%) and serpentine(Mg#=92.42–96.55), as well as residual olivine(Fo=89–90), orthopyroxene(En=89–90) and hornblende. Magnetite in the iron ores shows lower Al, Sc, Ti, Cr, Zn relative to that from ultramafic Fe-Ti-V iron ores, but similar to that from metamorphic chemical sedimentary iron deposit. In addition, interstitial minerals of dolomite, calcite, apatite and anhydrite are intergrown with magnetite and serpentine, revealing they were metamorphic, but not magmatic or late hydrothermal minerals. Wall rocks principally contain magnesian silicates of olivine(Fo=83–87), orthopyroxene(En=82–86), humite(Mg#=82–84) and hornblende [XMg=0.87–0.96]. Dolomite, apatite and anhydrite together with minor magnetite, thorianite(Th-rich oxide) and monazite(LREE-rich phosphate) are often seen as relicts or inclusions within magnesian silicates in the wall rocks, revealing that they were primary or earlier metamorphic minerals than magnesian silicates. And olivine exists as subhedral interstitial texture between hornblende, which shows later formation of olivine than hornblende and does not conform with sequence of magmatic crystallization. All these mineralogical features thus bias towards their metamorphic, rather than magmatic origin. The dominant chemical components of the iron ores are SiO_2(4.77–25.23 wt%), Fe_2O_3 T(32.9–80.39 wt%) and MgO(5.72–27.17 wt%) and uniformly, those of the wall rocks are also SiO_2(16.34–48.72 wt%), Mg O(16.71–33.97 wt%) and Fe_2O_3 T(6.98–30.92 wt%). The striking high Fe-Mg-Si contents reveal that protolith of the Zhaoanzhuang iron deposit was more likely to be chemical sedimentary rocks. The distinct high-Mg feature and presence of abundant anhydrite possibly indicate it primarily precipitated in a confined seawater basin under an evaporitic environment. Besides, higher contents of Al, Ti, P, Th, U, Pb, REE relative to other Precambrian iron-rich chemical precipitates(BIF) suggest some clastic terrestrial materials were probably input. As a result, we think the Zhaoanzhuang iron deposit had experienced the initial Fe-Mg-Si marine precipitation, followed by further Mg enrichment through marine evaporated process, subsequent high-grade metamorphism and late-stage hydrothermal fluid modification.  相似文献   

14.
Iron oxide–apatite deposits are present in Upper Eocene pyroxene-quartz monzonitic rocks of the Zanjan district, northwestern Iran. Mineralization occurred in five stages: (1) deposition of disseminated magnetite and apatite in the host rock; (2) mineralization of massive and banded magnetite ores in veins and stockwork associated with minor brecciation and calcic alteration of host rocks; (3) deposition of sulfide ores together with potassic alteration; (4) formation of quartz and carbonate veins and sericite, chlorite, epidote, silica, carbonate, and tourmaline alteration; and (5) supergene alteration and weathering. U–Pb dating of monazite inclusions in the apatite indicates an age of 39.99?±?0.24 Ma, which is nearly coeval with the time of emplacement of the host quartz monzonite, supporting the genetic connection. Fluid inclusions in the apatite have homogenization temperatures of about 300 °C and oxygen isotopic compositions of the magnetite support precipitation from magmatic fluids. Late-stage quartz resulted from the introduction of a cooler, less saline, and isotopically depleted fluid. The iron oxide–apatite deposits in the Tarom area of the Zanjan district are typical of a magmatic–hydrothermal origin and are similar to the Kiruna-type deposits with respect to mineral assemblages, fabric and structure of the iron ores, occurrence of the ore bodies, and wall rock alteration.  相似文献   

15.
The variant rock types of an Alkaline-Carbonatite Complex (ACC) comprising alkali pyroxenite, nepheline syenite, phoscorite, carbonatite, syenitic fenite and glimmerite along with REE and Nb-mineralization are found at different centres along WNW-ESE trending South Purulia Shear Zone (SPSZ) in parts of Singhbhum Crustal Province. The ACC occurs as intrusions within the Mesoproterozoic Singhbhum Group of rocks. Alkali pyroxenite comprises of aegirine augite, magnesiotaramite, magnesiokatophorite as major constituents. Pyrochlore and eucolite are ubiquitous in nepheline syenite. Phoscorite contains fluorapatite, dahllite, collophane, magnetite, hematite, goethite, phlogopite, calcite, sphene, monazite, pyrochlore, chlorite and quartz. Coarse fluorapatite shows overgrowth of secondary apatite (dahllite). Secondary apatite is derived from primary fluorapatite by solution and reprecipitation. The primary fluorapatite released REE to crystallize monazite grains girdling around primary apatite. Carbonatite is composed dominantly of Srcalcite along with dolomite, tetraferriphlogopite, phlogopitic biotite, aegirine augite, richterite, fluorapatite, altered magnetite, sphene and monazite. The minerals comprising of the carbonatite indicate middle stage of carbonatite development. Fenite is mineralogically syenite. Glimmerite contains 50–60% tetraferriphlogopite. An alkali trend in the evolution of amphiboles (magnesiotaramite-magnesiokatophorite-richterite) and chinopyroxenes (aegirine augite, aegirine) during the crystallization of the suite of rocks is noted. Monazite is the source of REE in phoscorite and carbonatite. Fluorapatite has low contents of REE, PbO, ThO2 and UO2. Pyrochlore reflects Nb-mineralization in nepheline syenite and it is enriched in Na2O, CaO, TiO2, PbO and UO2. Pyrochlore containing UO2 (6.605%) and PbO (0.914%) in nepheline syenite has been chemically dated at 948 ± 24 Ma by EPMA.  相似文献   

16.
The major Gushan iron oxide deposit, typical of the Middle‐Lower Yangtze River Valley, is located in the eastern Yangtze craton. Such deposits are generally considered to be genetically related to Yanshanian subvolcanic‐volcanic rocks and are temporally‐spatially associated with ca. 129.3–137.5 Ma dioritic porphyries. The latter have a very narrow 87Sr/86Sr range of 0.7064 to 0.7066 and low ?Nd(t) values of ?5.8 to ?5.7, suggesting that the porphyries were produced by mantle‐derived magmas that were crustally contaminated during magma ascent. The ore bodies occur mainly along the contact zone between dioritic porphyries and the sedimentary country rocks. The most important ore types are massive and brecciated ores which together make up 90 vol.‐% of the deposit. The massive type generally occurs as large veins consisting predominantly of magnetite (hematite) with minor apatite. The brecciated type is characterized by angular fragments of wall‐rocks that are cemented by fine‐grained magnetite. Stockwork iron ores occur as irregular veins and networks, especially with pectinate structure; they are composed of low‐temperature minerals (e.g. calcite), which indicate a hydrothermal process. The similar rare earth element patterns of apatite from the massive ores, brecciated ores and the porphyries, coupled with high‐temperature fluids (1000°C) suggest that they are magmatic in origin. Furthermore, melt flow structure commonly developed in massive ores and the absence of silicate minerals and cumulate textures suggest that the iron ores formed by the separation of an immiscible oxide melt from the silicate melt rather than by crystal fractionation. Combined with theoretical and experimental studies, we propose that the introduction of phosphorus due to crustal contamination during mantle‐derived magma ascent could have been a crucial factor that led to the formation of an immiscible oxide melt from the silicate magma.  相似文献   

17.
Coexisting sodic augite and omphacite were found in a zoisite amphibolite from the Iratsu epidote amphibolite mass in the Sanbagawa metamorphic terrain of central Shikoku, Japan. The occurrences of the sodic augite-omphacite pairs are classified into four types by texture: independent, composite, intergrowth and exsolution types. Sodic augite and omphacite of the independent and composite types (pair A) have X Na (=Na/(Na + Ca)) = 0.15 and 0.35, respectively, and were stable in the epidote amphibolite facies during the Sanbagawa progressive metamorphism. On the other hand, X Na values of sodic augite and omphacite of the intergrowth and exsolution types (pair B) are 0.10 and 0.44, respectively. The Na-poor augite and Na-rich omphacite of the pair B were formed by re-equilibration of the pair A at lower temperature. The pair A of the Iratsu sample suggests that a compositional gap lies between sodic augite and C2/c omphacite under epidote amphibolite facies conditions, and is in marked contrast to the coexistence of sodic augite and P2/n omphacite reported from some low-grade, high-pressure metamorphic terrains. A possible phase diagram to explain the chemistry and mode of occurrence of the coexisting sodic pyroxenes is proposed.  相似文献   

18.
The Early Cretaceous Duolong gold‐rich porphyry copper deposit is a newly discovered deposit with proven 5.38 Mt Cu resources of 0.72% Cu and 41 t gold of 0.23 g t?1 in northern Tibet. Granodiorite porphyry and quartz diorite porphyrite are the main ore‐bearing porphyries. A wide range of hydrothermal alteration associated with these porphyries is divided into potassic, argillic and propylitic zones from the ore‐bearing porphyry center outward and upward. In the hydrothermal alteration zones, secondary albite (91.5–99.7% Ab) occurs along the rim of plagioclase phenocryst and fissures. Secondary K‐feldspar (75.1–96.9% Or) replaces plagioclase phenocryst and matrix or occurs in veinlets. Biotite occurs mainly as matrix and veinlet in addition to phenocryst in the potassic zone. The biotite are Mg‐rich and formed under a highly oxidized condition at temperatures ranging from 400°C to 430°C. All the biotites are absent in F, and have high Cl content (0.19–0.26%), with log (XCl/XOH) values of ?2.74 to ?2.88 and IV (Cl) values of ?3.48 to ?3.35, suggesting a significant role of chloride complexes (CuCl2‐ and AuCl2‐) in transporting and precipitating copper and gold. Chlorites are present in all alteration zones and correspond mainly to pycnochlorite. They have similar Fe/(Fe+Mg), Mn/(Mn+Mg) ratios, and a formation temperature range of 280–360°C. However, the formation temperature of chlorite in the quartz‐gypsum‐carbonate‐chlorite vein is between 190°C and 220°C, indicating that it may have resulted from a later stage of hydrothermal activity. Fe3+/Fe2+ ratios of chlorites have negative correlation with AlIV, suggesting oxygen fugacity of fluids increases with decreasing temperature. Apatite mineral inclusions in the biotite phenocrysts show high SO3 content (0.44–0.82%) and high Cl content (1–1.37%), indicating the host magma had a high oxidation state and was enriched in S and Cl. The highest Cl content of apatite in the propylitic zone may have resulted from pressure decrease, and the lowest Cl content of apatite in the argillic zone may have been caused by a low Cl content in the fluids. The low concentration of SO3 content in the hydrothermal apatite compared to the magmatic one may have resulted from the decrease of oxygen fugacity and S content in the hydrothermal fluid, which are caused by the abundant precipitation of magnetite.  相似文献   

19.
Petrology and P–T estimates indicate that a magmatic epidote‐bearing quartz diorite pluton from Mt. Gamsby, Coast Plutonic Complex, British Columbia, was sourced at pressures below ～1.4 GPa and cooled nearly isobarically at ～0.9 GPa. The P–T path indicates that the magma was within the stability field of magmatic epidote early and remained there upon final crystallization. The pluton formed and crystallized at depths greater than ～30 km. REE data indicate that garnet was absent in the melting region and did not fractionate during crystallization. This suggests that the crust was less than or equal to ～55 km thick at 188 Ma during the early phases of magmatism in the Coast Plutonic Complex. Late Cretaceous contractional deformation and early Tertiary extension exhumed the rocks to upper crustal levels. Textures of magmatic epidote and other magmatic phases, combined with REE data, can be important for constraining the P–T path followed by magmas.  相似文献   

20.
Magnetite–apatite deposits in the Alborz volcano–plutonic belt, southeast Zanjan, in Iran, have blade, lenzoid, and vein forms, which extend in an E‐W direction. There are many magnetite–apatite veins and veinlets in this region, and some of them are economically important, such as Zaker, Morvarid, Sorkheh–Dizaj, and Aliabad. The sizes of the vein orebodies vary between 2 and 16 m in width, 10–100 m in length, and 5–40 m in depth. Microscopic examination of thin sections and polishes indicate that they are composed of magnetite and apatite, with minor amounts of goethite, hematite, actinolite, quartz, muscovite–illite, talc, dolomite, and calcite. The geochemistry and mineralogy of the granitic host rock reveals that it is calc‐alkaline and I‐type. Field observations, mineral paragenesis, the composition of the orebodies, and the composition of the fluid inclusions in the apatite minerals with low salinity (less than 20 wt.% NaCl equivalent) indicate that these magnetite veins were hydrothermally generated at about 200–430°C and are not related to silica–iron oxide immiscibility, as are the major Precambrian magnetite deposits in central Iran.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号