共查询到19条相似文献，搜索用时 109 毫秒
1.
《岩土工程技术》2016,(6)
以沈阳地区28个工程场地的工程地质资料和地基基础承载力资料为依据,采用统计回归的方法,对研究区域内浅层粉质黏土物理力学参数和承载力进行研究。并基于统一强度理论对太沙基理论进行改进,在其基础上建立了沈阳地区浅基础地基承载力经验公式。结果表明:研究区域内浅层粉质黏土物理参数的变异性小、相关性显著,力学参数的变异性相对较大、相关性不显著;浅层粉质黏土地层承载力与标准贯入实验值、旁压实验值以及土工试验参数和塑性指数与静止侧压力系数呈近似线性关系,地层承载力地域性经验公式和改进的太沙基理论基础上建立的沈阳地区浅基础地基承载力经验公式与实际承载力具有较高的符合性。研究成果可为区域性地基基础可靠性设计和承载力的确定提供必要的参考价值。 相似文献
2.
研究了Gudehus-Bauer亚塑性本构模型和模型参数的求取方法。采用侧限压缩试验曲线求取模型参数颗粒硬度hs和指数n。根据模型方程的推导,建立了拟合指数 和 与围压之间的关系,并提出了新的拟合参数。考虑到堆石料具有明显的剪胀、剪缩性,在Gudehus-Bauer模型线性项中增加了主要控制体积应变项 ,以改善模型对堆石料体积应变曲线的描述。采用堆石料大型侧限压缩试验、常规三轴试验分别验证了新的拟合参数和改进后的Gudehus-Bauer亚塑性本构模型。与堆石料试验成果比较,提出的新拟合参数与改进后的Gudehus-Bauer亚塑性本构模型可以较好地模拟堆石料的应力-应变特性,并较好地改善了堆石料体变曲线的模拟结果。对改进后的模型作了常规三轴加、卸载模拟,模拟结果反映了改进的Gudehus-Bauer亚塑性本构模型具有一定的卸载适应性。 相似文献
3.
4.
5.
为了研究土体结构破坏对软黏土一维变形的时效特性的影响,在Bjerrum的等时间线体系基础上,提出了等黏塑性应变率线等黏塑性应变率线概念,建立了非结构性软黏土的一维弹黏塑性模型;为了描述土体结构渐进破坏特征,定义了结构性参数--结构应变,在非结构性模型的基础上推导了结构性软黏土一维弹黏塑性模型;讨论了通过试验法直接确定模型参数的方法,并利用新建模型对温州天然软黏土的一维常规压缩试验、天然Ariake 黏土的分级快速固结试验、结构性Berthierville黏土的一维等应变率压缩试验及长期蠕变试验进行模拟。模拟与试验结果的对比表明,该模型能较好地描述结构性软黏土一维压缩变形的时效特征。 相似文献
6.
为了描述软黏土一维应力-应变关系的时效特性,基于Bjerrum的等时间线体系,提出等黏塑性应变率线概念,推导了黏塑性应变率与黏塑性应变增量的关系,建立了软黏土的一维弹黏塑性模型;从理论上分析了新建模型与3种典型的一维弹黏塑性时效本构模型的内在联系,表明新建模型与其他3种模型在本质上是等效的,且形式更简洁,物理意义更明确;利用新建模型对软黏土的固结-蠕变耦合效应、应变率效应、应力松弛效应等时效特性进行了理论分析,并得到了相应的解析解;结合宁波软黏土的一维固结试验,阐述了模型参数的确定方法,并用新建模型对宁波软黏土的固结-蠕变试验、温州软黏土的一维多级等应变率试验、香港海相软黏土的一维应力松弛试验进行模拟,验证了新建模型的有效性。研究结果表明,新建模型能很好地模拟软黏土的一维时效特性。 相似文献
7.
8.
为了预测基质吸力对非饱和粉质黏土蠕变行为的影响,开展其非饱和蠕变经验模型的研究。基于粉质黏土的非饱和蠕变试验,尝试改进Mesri模型和Log-Modified模型。其中Mesri模型和Log-Modified模型的应力-应变关系均采用双曲线函数描述,通过初始切线模量建立其与基质吸力的联系,从而得到应力-基质吸力-应变关系。而Mesri模型和Log-Modified模型的应变-时间关系分别通过幂函数、三参数幂函数描述,分别整合两个模型,得到改进后的Mesri模型和Log-Modified模型。改进后的两个模型为应力-基质吸力-应变-时间模型,利用ε/D-ε关系曲线和幂次关系拟合得到应力-基质吸力-应变关系参数,依据lnε-lnt关系曲线确定改进Mesri模型的应变-时间关系参数,采用BFGS算法和通用全局优化法求解改进Log-Modified模型的应变-时间关系参数。将关系参数分别代入两个改进后的模型,得到相应的非饱和蠕变经验模型。对非饱和蠕变曲线进行辨识,对比两种改进模型的预测精度。结果表明:改进后的Log-Modified模型的预测效果较差,改进后的Mesri模型能较为准确地描述非饱和粉质黏土的蠕变特性。 相似文献
9.
随着海洋工程建设的快速发展,海洋环境中的地基稳定性逐渐成为学者和工程师关注的热点问题,建立一个简化的饱和黏土循环加载模型对于长期循环荷载下海上构筑物的设计具有重要意义。针对饱和黏土的循环弱化特性,在Hardin-Drnevich等效非线性模型的基础上,建立了考虑循环弱化的饱和黏土简化非线性模型来描述循环加载下饱和黏土的应力-应变关系,模型中引入了由循环加载期间产生的累积塑性变形控制的强度和模量衰减比公式。通过参数分析,说明了形状参数 与n以及残余衰减比与衰减系数等参数的意义和作用。通过对文献中单向循环试验和双向循环试验结果的模拟,验证了该简化模型可以较好地描述循环加载时饱和黏土应力应变滞回圈的演变规律以及循环加载后饱和黏土的强度和刚度弱化现象。简化模型大大提高了计算效率,与传统的土体弹塑性模型相比更加便于工程应用。 相似文献
10.
假定准饱和黏土由饱和基质（土骨架和水）和封闭气体组成,采用饱和基质塑性体应变和气体塑性体应变作为硬化参数以反映准饱和黏土的塑性硬化行为,在综合考虑气体溶解系数随温度和水中含盐量变化、预固结应力随封闭气体的变化等关键因素的基础上,基于临界状态土力学理论提出了可以反映封闭气体气压变化对准饱和黏土力学影响的弹塑性本构模型。模型共计10个材料参数,均可通过等向压缩试验和三轴剪切试验获得。通过与已有试验数据对比分析,结果显示本模型可以较好地模拟准饱和黏土在不排水应力路径下的应力-应变关系、孔隙水压力发展以及饱和度的演变规律;所建立模型形式简单,参数易于确定,为准饱和黏土地基中岩土工程问题的设计、计算及灾变控制提供了重要的理论基础。 相似文献
11.
A hypoplastic constitutive model for clays 总被引：3，自引：0，他引：3
D. Ma&#x;ín 《国际地质力学数值与分析法杂志》2005,29(4):311-336
This paper presents a new constitutive model for clays. The model is developed on the basis of generalized hypoplasticity principles, which are combined with traditional critical state soil mechanics. The positions of the isotropic normal compression line and the critical state line correspond to the Modified Cam clay model, the Matsuoka–Nakai failure surface is taken as the limit stress criterion and the non‐linear behaviour of soils with different overconsolidation ratios is governed by the generalized hypoplastic formulation. The model requires five constitutive parameters, which correspond to the parameters of the Modified Cam clay model and are simple to calibrate on the basis of standard laboratory experiments. This makes the model particularly suitable for practical applications. The basic model may be simply enhanced by the intergranular strain concept, which allows reproducing the behaviour at very small strains. The model is evaluated on the basis of high quality laboratory experiments on reconstituted London clay. Contrary to a reference hypoplastic relation, the proposed model may be applied to highly overconsolidated clays. Improvement of predictions in the small strain range at different stress levels is also demonstrated. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
12.
The theory of hypoplasticity was developed initially for non-cohesive soils. However, sand and clay have many common properties;
therefore arose the idea to extend the hypoplastic model to clay. The proposed model is able to describe the behaviour of
cohesive soils with the incorporation of an appropriate structure tensor into the constitutive equation. This tensor is a
stress-like internal parameter, also called back stress. This enables us to describe the behaviour of cohesive soils with
the same material parameters for several states of consolidation and also to model barotropy and pycnotropy of sand. Numerical
simulations of element tests are performed in order to check the performance of this hypoplastic model. Experimental data
obtained with normally and overconsolidated clay and sand specimens with various densities are taken for comparison, and it
is shown that the model is capable of describing the material behaviour of clay and sand. The determination of the material
constants, the calibration method, is also presented in this paper. 相似文献
13.
14.
Suksun Horpibulsuk Martin D. Liu Deepa S. Liyanapathirana Jirayut Suebsuk 《Computers and Geotechnics》2010,37(1-2):1-9
In this paper, the mechanical properties of cemented clay are studied. The theoretical framework of the Structured Cam Clay (SCC) model is extended to describe the behaviour of cemented clay. The SCC model is modified to take into account special features of the behaviour of cemented clay. The widely used mean effective stress parameter is modified to include the influence of cementation on the strength and the plastic deformation of cemented clay. A new destructuring function is also suggested to represent the removal of the cementation structure, especially in the formation of the final failure state for artificially strongly cemented clay. The revised model is then employed to simulate and predict the behaviour of cemented clay with various degrees of cementation and confining stresses. The main features of the complicated behaviour of cemented clay can be reasonably represented well by the theoretical framework of the SCC model. Finally, the influence of cementation on the model parameters is discussed, and empirical equations are proposed to determine some of the key model parameters for engineering practice. 相似文献
15.
Two trial motorway embankments built on a landfill consisting of clayey lumps were monitored over the period of 3 and 5 years, respectively. The subsoil of the embankment was instrumented by hydrostatic levelling profiles, pore pressure transducers and depth reference points installed in boreholes. An advanced constitutive model for clays (hypoplastic model for clays with meta‐stable structure) was used for numerical modelling of both case histories. Basic hypoplastic model for clays was calibrated using isotropic compression tests and triaxial compression tests on reconstituted clay. Three additional model parameters describing the effects of lumpy structure were calibrated using oedometer tests on specimens prepared from scaled‐down lumpy material (material with smaller size of clay lumps). The performance of the model was evaluated by comparison with the results of the centrifuge model of self‐weight consolidated landfill. Finally, the hypoplastic model was used for simulation of both trial embankments and the results were compared with in situ measurements. The degradation of the lumpy structure of the upper layer of the in situ landfill due to weathering was back analysed using monitoring data. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
16.
Kadlíček Tomáš Janda Tomáš Šejnoha Michal Mašín David Najser Jan Beneš Štěpán 《Acta Geotechnica》2022,17(8):3439-3462
This paper introduces an automated deterministic method for the calibration of the Modified Cam-Clay and hypoplastic clay model. The calibration is structured in a hierarchical order established based on the apriori sensitivity study performed. The proposed method favours the clear physical meaning of the model parameters to a complete optimization of the objective error function. The method requires only basic laboratory experiments and it is currently implemented in the free-to-use online application called ExCalibre.
相似文献17.
A basic hypoplastic constitutive model for sand 总被引：1，自引：1，他引：0
Hypoplastic constitutive models are based on nonlinear tensor functions and are characterized by simple formulation and few parameters. In its early stage, mainly basic hypoplastic constitutive equations were concerned, where the stress tensor is assumed as the only state variable. There followed some enhanced models based on the basic constitutive equation by including void ratio as an additional state variable. In this paper, we first show that the widely used hypoplastic model by Wolffersdorff is seriously flawed because the underlying basic equation does not perform properly. We proceed to develop a basic hypoplastic constitutive equation by introducing a new tensorial term, which preserves the critical state at large strain. The model performance is demonstrated by parameter study for some element tests. This simple and robust basic equation is well suited to build more sophisticated models. 相似文献
18.
上海第4层黏土是典型的结构性海相软土,用一个本构模型统一地模拟不同应力路径下的力学特性对数值计算具有重要意义。对UNIFIED模型的结构性及超固结发展函数进行了改进,并提出了一种确定原状土材料参数和初始状态的方法。为了验证修正模型的正确性,用块状取土法取得上海第4层原状土样,进行了固结试验和三轴排水、不排水剪切试验。通过比较试验结果和本构模拟结果,明确了新的本构模型仅用一组材料参数就能统一地模拟上海第4层黏土在固结、排水及不排水三轴试验得到的应力-应变关系。模拟结果揭示了上海第4层黏土的结构比较稳定,即使在经历三轴剪切发生35%轴应变后仍能保持较高位的结构性。 相似文献
19.
Incorporation of void ratio as a state variable into constitutive models allows, in principle, to use a single set of parameters for soils with different OCRs. Two sets of experimental data on reconstituted clays are used for evaluation of three constitutive models of different complexity (Modified Cam clay model, 3SKH model, hypoplastic model for clays). Although all the models predict the influence of OCR correctly from the qualitative point of view, quantitative comparison using a suitable scalar error measure reveals merits and shortcomings of different models. 相似文献