首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献，搜索用时 156 毫秒
1.
The Tieluping silver deposit, which is sited along NE-trending faults within the high-grade metamorphic basement of the Xiong‘er terrane, is part of an important Mesozoic orogenic-type Ag-Pb and Au belt recently discovered. Ore formation includes three stages: Early (E), Middle (M) and Late (L), which include quartz-pyrite (E),polymetallic sulfides (M) and carbonates (L), respectively. The E-stage fluids are characterized by δD=-90%c,δ^13CCO2=2.0‰ and δ^18O=9‰ at 373℃, and are deeply sourced; the L-stage fluids, with δD=-70‰, δ^13C CO2=-1.3%c and δ^18O=-2‰, are shallow-sourced meteoric water; whereas the M-stage fluids, with δD=-109‰, δ^13C CO2=0.1%c and δ^18O2‰, are a mix of deep-sourced and shallow-sourced fluids. Comparisons of the D-O-C isotopic systematics of the Estage ore-forming fluids with the fluids derived from Mesozoic granites, Archean-Paleoproterozoic metamorphic basement and Paleo-Mesoproterozoic Xiong‘er Group, show that these units cannot generate fluids with the measured isotopic composition (high δ^180 and δ^13C ratios and low δD ratios) characteristic of the ore-forming fluids. This suggests that the E-stage ore-forming fluids originated from metamorphic devolatilization of a carbonate-shale-chert lithological association, locally rich in organic matter, which could correspond to the Meso-Neoproterozoic Guandaokou and Luanchuan Groups, rather than to geologic units in the Xiong‘er terrane, the lower crust and the mantle. This supports the view that the rocks of the Guandaokou and Luanchuan Groups south of the Machaoying fault might be the favorable sources. A tectonic model that combines collisional orogeny, metallogeny and hydrothermal fluid flow is proposed to explain the formation of the Tieluping silver deposit. During the Mesozoic collision between the South and North China paleocontinents, a crustal slab containing a lithological association consisting of carbonate-shale-chert, locally rich in organic matter (carbonaceous shale) was thrust northwards beneath the Xiong‘er terrane along the Machaoying fault.Metamorphic devolatilization of this underthrust slab provided the ore-forming fluids to develop the Au-Ag-(Pb-Zn) ore belt, which includes the Tieluping silver deposit.  相似文献   

2.
The Shanggong Au deposit in the Xiong’er Terrane, East Qinling, China, has resources of about 30 ton Au, making it one of the largest orogenic-mesothermal Au deposits hosted in volcanic rocks of the Mesoproterozoic Xiong’er Group. Three stages of hydrothermal activity are recognized (early, middle and late), of which two (early and middle) were ore producing and characterized by quartz–pyrite and polymetallic sulfides, respectively. The third and late stage is represented by a carbonate–quartz assemblage. Hydrogen, oxygen and carbon isotope systematics of the Shanggong deposit from a previous work suggest that the early stage fluids were derived from magmatic and/or metamorphic devolatilization of sedimentary rocks at depth. This is supported by new C, S and published Sr and Pb isotopic data, presented in this paper. These new data, δ13C values ranging from 1.5 ‰ for early stage ankerite to −2.2 ‰ for late stage ankerite, negative δ34S values for sulfides from the middle stage (–19.2 to –6.3 ‰), suggest a contribution from organic matter and that the ore fluid evolved from deeply sourced to shallowly sourced, with those of the middle stage representing a mixture of these two fluid systems. The comparison of the hydrogen–oxygen–carbon–sulfur–lead–strontium isotope systematics between the Shanggong deposit and the main lithologies in the Xiong’er Terrane, shows that neither these nor the underlying lower crust and mantle, or combinations thereof, could be considered as the source of ore fluids for the Shanggong Au deposit. A likely source was a carbonaceous carbonate, sandstone, shale, chert sequence in the underthrusted Guandaokou and Luanchuan Groups, exposed south of the Xiong’er Terrane.Ar–Ar and Rb–Sr isochron ages for mineral phases of the early, middle and late stages, together with geological field data, constrain the timing of the hydrothermal activity and Au metallogenesis at 242 ± 10, 167 ± 7 and 112 ± 7 Ma, respectively. This metallogenesis and associated granitic magmatism, can be related to the continental collision between the Yangtze and North China Cratons that resulted in the formation of the Qinling Orogen, led to the different hydrothermal systems that were responsible for the three stages that formed the Shanggong Au deposit, over a period of about 130 Myrs.  相似文献   

3.
The Sanshandao Au deposit is located in the famous Sanshandao metallogenic belt, Jiaodong area. To date, accumulative Au resources of 1000 t have been identified from the belt. Sanshandao is a world-class gold deposit with Au mineralization hosted in Early Cretaceous Guojialing-type granites. Thus, studies on the genesis and ore-forming element sources of the Sanshandao Au deposit are crucial. He and Ar isotopic analyses of fluid inclusions from pyrite(the carrier of Au) indicate that the fluid inclusions have 3 He/4 He=0.043–0.21 Ra with an average of 0.096 Ra and 40 Ar/36 Ar=488–664 with an average of 570.8. These values represent the initial He and Ar isotopic compositions of ore-forming fluids for trapped fluid inclusions. The comparison of H–O isotopic characteristics combined with deposit geology and wall rock alteration reveals that the ore-forming fluids of the Sanshandao Au deposit show mixed crust–mantle origin characteristics, and they mainly comprise crust-derived fluid mixed with minor mantle-derived fluid and meteoric water during the uprising process. The ore-forming elements were generally sourced from pre-Cambrian meta-basement rocks formed by Mesozoic reactivation and mixed with minor shallow crustal and mantle components.  相似文献   

4.
西秦岭凤太矿集区丝毛岭金矿床地质地球化学特征   总被引：1，自引：0，他引：1  
西秦岭凤太矿集区丝毛岭金矿床位于八卦庙造山型金矿床西侧5km左右,是一个新探明的剪切带型金矿。其成矿作用过程可分为早期石英-绢云母-硫化物阶段、中期多金属-硫化物阶段和晚期碳酸盐阶段。对早、中期的石英流体包裹体测试结果表明,丝毛岭金矿床成矿流体以富CO2、中温、低盐度为特征,总体上属于中温低盐度CO2-H2O体系,流体包裹体类型的多样性是流体不混溶性的产物。从早阶段到主成矿阶段成矿流体的温度、压力和盐度均有降低,硫逸度增高,有利于金的沉淀富集。H、O、S、C同位素研究结果,以及与八卦庙金矿床的对比分析表明,二者的成矿流体具有相似性和同源性,都是以深部来源为主的多源流体。由于丝毛岭金矿床产出的层位高于八卦庙金矿床,其成矿环境相对开放。  相似文献   

5.
The Dahutang tungsten polymetallic ore field is located north of the Nanling W-Sn polymetallic metallogenic belt and south of the Middle—Lower Yangtze River Valley Cu-Mo-Au-Fe porphyry-skarn belt.It is a newly discovered ore field,and probably represents the largest tungsten mineralization district in the world.The Shimensi deposit is one of the mineral deposits in the Dahutang ore field,and is associated with Yanshanian granites intruding into a Neoproterozoic granodiorite batholith.On the basis of geologic studies,this paper presents new petrographic,microthermometric,laser Raman spectroscopic and hydrogen and oxygen isotopic studies of fluid inclusions from the Shimensi deposit.The results show that there are three types of fluid inclusions in quartz from various mineralization stages:liquid-rich two-phase fluid inclusions,vapor-rich two-phase fluid inclusions,and three-phase fluid inclusions containing a solid crystal,with the vast majority being liquid-rich two-phase fluid inclusions.In addition,melt and melt-fluid inclusions were also found in quartz from pegmatoid bodies in the margin of the Yanshanian intrusion.The homogenization temperatures of liquid-rich two-phase fluid inclusions in quartz range from 162 to 363℃ and salinities are 0.5wt%-9.5wt%NaCI equivalent.From the early to late mineralization stages,with the decreasing of the homogenization temperature,the salinity also shows a decreasing trend.The ore-forming fluids can be approximated by a NaCl-H_2O fluid system,with small amounts of volatile components including CO_2,CH_4 and N_2,as suggested by Laser Raman spectroscopic analyses.The hydrogen and oxygen isotope data show that δ5D_(V-smow) values of bulk fluid inclusions in quartz from various mineralization stages vary from-63.8‰ to-108.4‰,and the δ~(18)O_(H2O) values calculated from the δ~(18)O_(V-)smow values of quartz vary from-2.28‰ to 7.21‰.These H-O isotopic data are interpreted to indicate that the ore-forming fluids are mainly composed of magmatic water in the early stage,and meteoric water was added and participated in mineralization in the late stage.Integrating the geological characteristics and analytical data,we propose that the ore-forming fluids of the Shimensi deposit were mainly derived from Yanshanian granitic magma,the evolution of which resulted in highly differentiated melt,as recorded by melt and melt-fluid inclusions in pegmatoid quartz,and high concentrations of metals in the fluids.Cooling of the ore-forming fluids and mixing with meteoric water may be the key factors that led to mineralization in the Dahutang tungsten polymetallic ore field.  相似文献   

6.
The Tieluping silver deposit, which is sited along NE-trending faults within the high-grade metamorphic basement of the Xionger Terrane in the Qinling orogenic belt, is part of an important, recently discovered Mesozoic orogenic-type Ag-Pb belt. Ore formation includes three stages: an early barren quartz-pyrite stage (E), an intermediate polymetallic sulfide ore stage (M), and a late barren carbonate stage (L). Carbon, sulfur and lead isotope systematics indicate that the E-stage fluids are deeply sourced; the L-stage fluids are shallow-sourced meteoric water; whereas the M-stage fluids are a mix of deep-sourced and shallow-sourced fluids. Sulfur and lead isotope data show that the ore-forming fluids must have originated from a source with elevated radiogenic lead and low 34S values, that differs significantly from exposed geologic units in the Xionger Terrane, the lower crust and the mantle. This supports the view that the carbonate-shale-chert sequences of the Guandaokou and Luanchuan Groups south of the Machaoying fault might be the favorable sources, although little is known about their isotopic compositions. A tectonic model that combines collisional orogeny, metallogeny and hydrothermal fluid flow is proposed to explain the formation of the Tieluping silver deposit. During the Mesozoic collision between the North China Craton and South China Block (Early-Mid Triassic Indosinian Orogeny), crustal slabs containing the carbonate-shale-chert sequences of the Guandaokou and Luanchuan Groups, locally rich in organic matter (carbonaceous shale), were thrust northwards beneath the Xionger Terrane along the Machaoying fault. Metamorphic devolatilisation of this underthrust slab probably provided the ore-forming fluids to develop the Ag-Pb ore belt, which includes the Tieluping silver deposit. Fluids and magmas were emplaced during extensional stages related to the Jurassic-Cretaceous Yanshanian Orogeny.Editorial Handling: B. Lehmann  相似文献   

7.
The Kendekeke polymetallic deposit, located in the middle part of the magmatic arc belt of Qimantag on the southwestern margin of the Qaidam Basin, is a polygenetic compound deposit in the Qimantag metallogenic belt of Qinghai Province. Multi-periodic ore-forming processes occurred in this deposit, including early-stage iron mineralization and lead-zinc-gold-polymetallic mineralization which was controlled by later hydrothermal process. The characteristics of the ore-forming fluids and mineralization were discussed by using the fluid inclusion petrography, Laser Raman Spectrum and micro-thermometry methods. Three stages, namely, S1-stage(copper-iron-sulfide stage), S2-stage(lead-zinc-sulfide stage) and C-stage(carbonate stage) were included in the hydrothermal process as indicated by the results of this study. The fluid inclusions are in three types: aqueous inclusion(type I), CO2-aqueous inclusion(type II) and pure CO2 inclusion(type III). Type I inclusions were observed in the S1-stage, having homogenization temperature at 240–320oC, and salinities ranging from 19.8% to 25.0%(wt % NaCl equiv.). All three types of inclusions, existing as immiscible inclusion assemblages, were presented in the S2-stage, with the lowest homogenization temperature ranging from 175 oC to 295oC, which represents the metallogenic temperature of the S2-stage. The salinities of these inclusions are in the range of 1.5% to 16%. The fluid inclusions in the C-stage belong to types I, II and III, having homogenization temperatures at 120–210oC, and salinities ranging from 0.9% to 14.5%. These observations indicate that the ore-forming fluids evolved from high-temperature to lowtemperature, from high-salinity to low-salinity, from homogenization to immiscible separation. Results of Laser Raman Spectroscopy show that high density of CO2 and CH4 were found as gas compositions in the inclusions. CO2, worked as the pH buffer of ore-forming fluids, together with reduction of organic gases(i.e. CH4, etc), affected the transport and sediment of the minerals. The fluid system alternated between open and close systems, namely, between lithostatic pressure and hydrostatic pressure systems. The calculated metallogenic pressures are in the range of 30 to 87 Mpa corresponding to 3 km mineralization depth. Under the influence of tectonic movements, immiscible separation occurred in the original ore-forming fluids, which were derived from the previous highsalinity, high-temperature magmatic fluids. The separation of CO2 changed the physicochemical properties and composition of the original fluids, and then diluted by mixing with extraneous fluids such as meteoric water and groundwater, and metallogenic materials in the fluids such as lead, zinc and gold were precipitated.  相似文献   

8.
Abstract. The Yuryang gold deposit, comprising a Te‐bearing Au‐Ag vein mineralization, is located in the Cheonan area of the Republic of Korea. The deposit is hosted in Precambrian gneiss and closely related to pegmatite. The mineralized veins display massive quartz textures, with weak alteration adjacent to the veins. The ore mineralization is simple, with a low Ag/Au ratio of 1.5:1, due to the paucity of Ag‐phases. Ore mineralization took place in two different mineral assemblages with paragenetic time; early Fe‐sulfide mineralization and late Fe‐sulfide and Au‐Te mineralization. The early Fe‐sulfide mineralization (pyrite + sphalerite) occurred typically along the vein margins, and the subsequent Au‐Te mineralization is characterized by fracture fillings of galena, sphalerite, pyrrhotite, Te‐bearing minerals (petzite, altaite, hessite and Bi‐Te mineral) and electrum. Fluid inclusions characteristically contain CO2 and can be classified into four types (Ia, Ib, IIa and IIb) according to the phase behavior. The pressure corrected temperatures (≥500d?C) indicate that the deposit was formed at a distinctively high temperature from fluids with moderate to low salinity (<12 wt% equiv. NaCl) and CH4 (1?22 mole %). The sphalerite geo‐barometry yield an estimated pressure about 3.5 ?2.1 kbar. The dominant ore‐deposition mechanisms were CO2 effervescence and concomitant H2S volatilization, which triggered sulfidation and gold mineralization. The measured and calculated isotopic compositions of fluids (δ18OH2O = 10.3 to 12.4 %o; δDH2O = ‐52 to ‐77 %o) may indicate that the gold deposition originated from S‐type magmatic waters. The physicochemical conditions observed in the Yuryang gold deposit indicate that the Jurassic gold deposits in the Cheonan area, including the Yuryang gold deposit are compatible with deposition of the intrusion‐related Au‐Te veins from deeply sourced fluids generated by the late Jurassic Daebo magmatism.  相似文献   

9.
河南桐柏老湾金矿床的成矿作用是在变基性火山碎屑沉积岩为矿源层的背景上演化的。本文根据矿床氢氧同位素研究,认为矿床的热液成矿期成矿流体为大气降水和老湾花岗岩岩浆水的混合,成矿Ⅰ阶段和Ⅱ阶段以岩浆水为主,成矿Ⅲ阶段以大气降水为主,但在成矿Ⅱ阶段大气降水已占有很大的比例。氦同位素分析表明,在老湾金矿形成过程中有地幔流体加入,且从成矿Ⅱ阶段至Ⅲ阶段,由于大气降水比例增大,其与地幔流体的混合导致成矿流体的3He/4He比值不断减小。  相似文献   

10.
The Haobugao deposit, located in the southern segment of the Great Xing'an Range, is a famous skarn‐related Pb‐Zn‐(Cu)‐(Fe) deposit in northern China. The results of our fluid inclusion research indicate that garnets of the early stage (I skarn stage) contain three types of fluid inclusions (consistent with the Mesozoic granites): vapor‐rich inclusions (type LV, with VH2O/(VH2O + LH2O) < 50 vol %, and the majority are 5–25 vol %), liquid‐rich two‐phase aqueous inclusions (type VL, with VH2O/(VH2O + LH2O) > 50 vol %, the majority are 60–80 vol %), and halite‐bearing multiphase inclusions (type SL). These different types of fluid inclusions are totally homogenized at similar temperatures (around 320–420°C), indicating that the ore‐forming fluids of the early mineralization stage may belong to a boiling fluid system. The hydrothermal fluids of the middle mineralization stage (II, magnetite‐quartz) are characterized by liquid‐rich two‐phase aqueous inclusions (type VL, homogenization temperatures of 309–439°C and salinities of 9.5–14.9 wt % NaCl eqv.) that coexist with vapor‐rich inclusions (type LV, homogenization temperatures of 284–365°C and salinities of 5.2–10.4 wt % NaCl eqv.). Minerals of the late mineralization stage (III sulfide‐quartz stage and IV sulfide‐calcite stage) only contain liquid‐rich aqueous inclusions (type VL). These inclusions are totally homogenized at temperatures of 145–240°C, and the calculated salinities range from 2.0 to 12.6 wt % NaCl eqv. Therefore, the ore‐forming fluids of the late stage are NaCl‐H2O‐type hydrothermal solutions of low to medium temperature and low salinity. The δD values and calculated δ18OSMOW values of ore‐forming fluids of the deposit are in the range of ?4.8 to 2.65‰ and ?127.3‰ to ?144.1‰, respectively, indicating that ore‐forming fluids of the Haobugao deposit originated from the mixing of magmatic fluid and meteoric water. The S‐Pb isotopic compositions of sulfides indicate that the ore‐forming materials are mainly derived from underlying magma. Zircon grains from the mineralization‐related granite in the mining area yield a weighted 206Pb/238U mean age of 144.8 ±0.8 Ma, which is consistent with a molybdenite Re‐Os model age (140.3 ±3.4 Ma). Therefore, the Haobugao deposit formed in the Early Cretaceous, and it is the product of a magmatic hydrothermal system.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号