共查询到19条相似文献，搜索用时 156 毫秒
1.
不同应力路径下超固结黏土试样变形局部化分析 总被引：2，自引：1，他引：1
基于改进伏斯列夫面超固结黏土三维本构模型,利用有限元软件ABAQUS材料子程序接口,采用回映应力更新算法,实现了该模型在有限元分析中的应用。通过该模型与比奥固结理论的耦合,对超固结比为8的超固结黏土在三轴压缩、三轴伸长及平面应变应力条件下的变形局部化问题,进行了水-土耦合弹塑性有限元分析。分析结果表明：剪切带带内、带外点经历不同应力路径;剪切带带外单元经历了体缩、剪胀及被吸水体缩过程,而剪切带带内单元一直保持剪胀趋势;剪切带的形成伴随着剪胀,剪切带内、外出现了负的孔压,且孔压的分布也具有局部化特性。关于剪切带带内、外的孔隙水压及体变变化趋势与剪切速率有关,而平面应变介于三轴压缩与三轴伸长之间,但平面应变较早出现剪切带。孔隙水的迁移速度影响剪切带带内单元的剪胀,进而影响剪切带的形成及发展;而围压和弱单元位置也对剪切带的形成也有影响。 相似文献
2.
粉质黏土卸荷变形特性试验研究 总被引：4，自引：0，他引：4
依托武汉长江隧道江北明挖段基坑工程,开展了一系列的K0固结状态下原状粉质黏土卸荷应力路径排水剪三轴试验,并对卸荷变形特性进行了深入分析。分析表明：卸荷应力路径下原状粉质黏土的应力-应变关系与应力路径有着密切的关系,近似呈双曲线型。根据应力-应变曲线表现,可将卸荷应力路径分为A、B两组,A组应力路径试样表现为轴向压缩;B组应力路径试样表现为轴向伸长。卸荷应力路径下粉质黏土的应力-应变关系具有良好的归一化特性,同一应力路径下不同固结压力的应力-应变曲线可采用双曲线函数用平均固结压力归一化,但A、B两组应力路径下的归一化方程有所差别。给出了各种应力路径下的归一化方程,可为卸荷土体的变形参数及本构关系研究提供参考。 相似文献
3.
重塑超固结上海软土力学特性及弹塑性模拟 总被引：1，自引：0，他引：1
对典型上海软土重塑样进行了围压不变和平均主应力不变的三轴排水剪切试验,得到重塑上海软土在不同初始超固结比和围压条件下的应力-应变关系,弄清了超固结比、围压以及应力路径对重塑上海软土的变形和强度特性的影响;根据土体的应力-应变曲线得到重塑上海软土的临界状态应力比及内摩擦角。采用姚仰平等建议的基于伏斯列夫面的超固结土本构模型,并根据等向压缩及三轴排水剪切试验确定其模型参数,对保持围压和平均主应力不变的三轴压缩试验进行了模型预测。预测结果表明,此超固结土本构模型能较好地反映重塑超固结上海软土的变形和强度特性。 相似文献
4.
利用GDS应力路径三轴试验系统对南阳膨胀土进行3种应力速率下、4种超固结比（OCR）的被动压缩三轴试验及3种超固结比的被动挤伸三轴试验,分析了不同超固结比和应力速率下其应力（孔隙水压力）-应变关系、有效应力路径及变形模量的演化规律,对膨胀土变形模量各向异性特性进行了初步探讨。结果表明,应力速率、超固结比及卸荷路径均对膨胀土力学特性有一定影响。在被动压缩路径和被动挤伸路径下,随着应力速率和超固结比的增加,相同轴向应变时的偏应力值单调增加;不同超固结比和应力速率时膨胀土的孔隙水压力始终为负值,且其降幅总体上随超固结比的增加而增大,但其降幅随应力速率的变化规律与剪切路径有关。在被动压缩路径下,相同应变时不同应力速率下的孔压降幅基本相同;而在被动挤伸路径下,其降幅随应力速率的增加而增大。边坡开挖路径的选择对于边坡变形影响显著,被动挤伸路径下达到设定极限偏应力时的轴向应变明显大于被动压缩路径。膨胀土变形模量E100随着超固结比和应力速率的增加而增加,但各应力速率下变形模量的各向异性特性则随着超固结比的增加而变弱。 相似文献
5.
土的基本力学特性及其弹塑性描述 总被引：8，自引：2，他引：6
Cam-clay模型是在等向加载试验基础上建立起来的且能够描述正常固结土在常规三轴试验条件下应力-应变关系的最简单弹塑性模型,是建立各种土的弹塑性本构模型的基础。文中分别按加载方式的不同和土组构的不同,对描述与应力状态、应力历史、应力路径、持荷时间等因素有关的加载方式下土应力应变特性的弹塑性本构模型进行了归纳。对反映不同组构所形成的结构性、各向异性和颗粒破碎等特性的弹塑性本构模型进行了综述,并着重介绍了描述应力状态的三维化方法、反映应力历史影响的超固结土模型和模拟渐近状态路径的渐近状态模型等典型研究成果。 相似文献
6.
天然土体经历开挖卸荷应力路径后,其应力变形特性与常规加载应力路径条件下规律存在较大差异。目前常用土体本构模型大多建立在等向固结单向加载三轴试验基础上,没有考虑初始K0固结和开挖卸荷应力路径的影响。以剑桥模型为基础,借鉴关口-太田模型的建模思想,通过引入新的应力比参数,对p-q平面上屈服轨迹硬化轴进行旋转,调整弹性区范围,以反映初始K0固结的影响;再运用变换应力法将模型三维化处理,从而使模型可以描述土体三向不等向应力状态,最终得到一个能综合反映土体K0固结开挖卸荷应力-应变特性的三维弹塑性本构模型。通过和典型室内应力路径试验结果进行对比,验证了模型的合理性。 相似文献
7.
在深入探讨海相沉积原状软黏土压缩、变形等力学特性和详细分析加载屈服面随荷载情况变化的基础上,确认了海相沉积原状软黏土的强度、变形特性与结构屈服应力密切相关。即当固结压力小于结构屈服应力时,其力学特性与超固结重塑土的力学特性类似;当固结压力大于结构屈服应力时,其力学特性与正常固结重塑土的力学特性类似。为描述海相沉积原状软黏土的上述力学特性,将姚仰平等提出的超固结重塑土本构模型引入到海相沉积软黏土弹塑性本构模型的构建中。在本构模型构建过程中,考虑了海相沉积原状软黏土具有的抗拉强度及其演化规律,软黏土强度包线的特点及其进一步修正的表达式,使模型更符合海相原状软黏土的强度、变形特性。最后,将3种不同海相沉积软黏土固结排水剪切试验得到的应力-应变-体变曲线与模型预测结果进行对比。比较结果显示,本文提出的弹塑性本构模型能很好地描述海相沉积原状软黏土的剪缩硬化、剪胀软化以及变形的应力水平依存性等力学特性。 相似文献
8.
上海第4层黏土是典型的结构性海相软土,用一个本构模型统一地模拟不同应力路径下的力学特性对数值计算具有重要意义。对UNIFIED模型的结构性及超固结发展函数进行了改进,并提出了一种确定原状土材料参数和初始状态的方法。为了验证修正模型的正确性,用块状取土法取得上海第4层原状土样,进行了固结试验和三轴排水、不排水剪切试验。通过比较试验结果和本构模拟结果,明确了新的本构模型仅用一组材料参数就能统一地模拟上海第4层黏土在固结、排水及不排水三轴试验得到的应力-应变关系。模拟结果揭示了上海第4层黏土的结构比较稳定,即使在经历三轴剪切发生35%轴应变后仍能保持较高位的结构性。 相似文献
9.
10.
不同应力路径下某高速公路路基黏性土湿化变形试验研究 总被引：2，自引：0，他引：2
针对某高速公路黏性填土路基浸水湿化的情况,进行了大量室内试验研究。为了研究土在实际应力路径下的湿化变形规律,分别在常规三轴应力路径、常规三轴K0固结应力路径、K0固结+常规三轴压缩应力路径以及使用真三轴仪的平面应变下K0固结 + 平面应变剪切应力路径和平面应变等应力比路径下进行了黏性土的湿化试验。通过对试验数据的分析,得到了湿化附加轴向应变与湿化时应力水平的幂函数关系。通过总结研究不同应力路径下应力-应变曲线的规律,提出了不同应力路径下的应力-应变关系的公式。 相似文献
11.
12.
Yuki Yamakawa Kiyohiro Ikeda Isao Saiki Jacques Desrues Reiko J. Tanaka 《国际地质力学数值与分析法杂志》2018,42(1):3-33
Shear bands with characteristic spatial patterns observed in an experiment for a cubic or parallelepiped specimen of dry dense sand were simulated by numerical bifurcation analysis using the Cam‐clay plasticity model. By incorporating the subloading surface concept into the plasticity model, the model became capable of reproducing hardening/softening and contractive/dilative behavior observed in the experiment. The model was reformulated to be compatible with the multiplicative hyperelasto‐plasticity for finite strains. This enhanced constitutive model was implemented into a finite‐element code reinforced by a stress updating algorithm based on the return‐mapping scheme, and by an efficient numerical procedure to compute critical eigenvectors of elastoplastic tangent stiffness matrix at bifurcation points. The emergence of diamond‐ and column‐like diffuse bifurcation modes breaking uniformity of the materials, followed by the evolution of shear bands through strain localization, was observed in the analysis. In the bifurcation analysis of plane strain compression test, unexpected bifurcation modes, which broke out‐of‐plane uniformity and led to 3‐dimensional diamond‐like patterns, were detected. Diffuse bifurcations, which were difficult to observe by experiments, have thus been found as a catalyst creating diverse shear band patterns. 相似文献
13.
土体应变局部化现象的理论解析 总被引：7，自引：6，他引：1
引起土体失稳的应变局部化现象是在特定应力状态下,土体本构产生的分叉特性。基于有限变形理论推导了应变局部化产生的三维解析解。基于应变局部化的理论解析,分析了轴对称和平面应变条件下应变局部化现象在弹塑性硬化阶段的存在性以及剪切带的方向性。 理论分析表明,在轴对称条件下,土体应变局部化产生于土体应力-应变的软化阶段,而平面应变条件下,土体应变局部化一般出现在应力-应变的硬化阶段,其剪切带方向角的理论预测与Arthur等[1]建议值较为一致。 相似文献
14.
Ajanta Sachan 《Geotechnical and Geological Engineering》2013,31(1):213-228
The present paper evaluates the role of microfabric in strain localization patterns observed in soil specimens during its shear deformation in compression and extension triaxial testing. A series of compression and extension lubricated end triaxial tests are performed on Kaolin clay with extreme as well as intermediate microfabrics, which are obtained using slurry consolidation technique by varying calagon content from 0 to 3 %. Intermediate microfabric is the geometric arrangement of particles within the soil mass, which lies in between the particle orientation during two extreme microfabrics; flocculated and dispersed. Flocculated has random orientation of particles with face-to-edge particle contacts and dispersed has parallel orientation of particles with face-to-face particle contacts. When the specimen is subjected to large stress levels in triaxial testing, the particle orientation and geometric arrangement get affected due to the force acting on the clay platelets. In this experimental research, the variation in clay’s stress–strain and pore pressure response and initiation, propagation and formation of shear bands at different levels of compression and extension shearing is evaluated using digital image analysis setup associated with triaxial system. 相似文献
15.
Geomaterials such as sand and clay are highly heterogeneous multiphase materials. Nonlocality (or a characteristic length scale) in modeling geomaterials based on the continuum theory can be associated with several factors, for instance, the physical interactions of material points within finite distance, the homogenization or smoothing process of material heterogeneity, and the particle or problem size-dependent mechanical behavior (eg, the thickness of shear bands) of geomaterials. In this article, we formulate a nonlocal elastoplastic constitutive model for geomaterials by adapting a local elastoplastic model for geomaterials at a constant suction through the constitutive correspondence principle of the state-based peridynamics theory. We numerically implement this nonlocal constitutive model via the classical return-mapping algorithm of computational plasticity. We first conduct a one-dimensional compression test of a soil sample at a constant suction through the numerical model with three different values of the nonlocal variable (horizon) δ. We then present a strain localization analysis of a soil sample under the constant suction and plane strain conditions with different nonlocal variables. The numerical results show that the proposed nonlocal model can be used to simulate the inception and propagation of shear banding as well as to capture the thickness of shear bands in geomaterials at a constant suction. 相似文献
16.
17.
Strain localization developing inside soft rock specimens is examined through experimental observation and numerical simulation. In the experimental study, soft rock specimens are sheared at different strain rates under plane strain conditions and deformation and strain localization characteristics are analysed. Transition of localization mode from highly localized mode for higher strain rate to distributed and diffused mode of strain localization for lower strain rates was observed. In the numerical study, simulations of plane strain compression tests are carried out at different strain rates by using an overstressed‐type elasto‐viscoplastic model in finite element computations. The role of strain rates on setting gradients of strain fields across shear band is clarified. The probable mechanism for transition of localization mode is discussed. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
18.
19.
土体结构性的数学模型是21世纪土力学的核心问题。由于土体微观结构的变化造成了重塑土与原状土的力学特性上的差异。采用应变型和应力型结构性宏观参数来表征这种微观结构的变化,同时将应变性结构性参数引入到等向固结过程中去,用以描述常规三轴试验中剪切前的等向固结过程以及剪切时球应力对结构性土体的影响。实现应变型和应力型结构性宏观参数对整个三轴剪切过程的描述。修正剑桥模型对正常固结重塑黏土的三轴压缩试验能做出准确地描述,但对超固结黏土及原状土,即具有结构地土体,则不能给出准确地描述。将应变型和应力型结构性宏观参数引入到修正剑桥模型中,实现修正剑桥模型的结构化。该结构性修正剑桥模型参数的确定方法与常规修正剑桥模型参数的确定方法相差不多,只不过多了球应力与土体结构性体应变的关系式、偏应力与土体结构性广义剪应变的关系式。经过数值模拟比较,结构性修正的剑桥模型能较好地反映原状土的结构性演化过程,能描述原状土结构的整个破坏过程,在多种应力路径下具有很好的预测作用。 相似文献