首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Fluids can play an important role in the localization of deformation in the deep crust, yet the specific mechanisms active during the complex interactions between metasomatism, metamorphism and deformation remain elusive. Precambrian metagabbronorite dykes in southwest Montana contain fractures filled with Hbl±Grt and discrete cm‐scale shear zones with well‐preserved strain gradients. This system offers an ideal opportunity to constrain the chemical and mechanical processes that facilitated strain localization. An early M1 assemblage of Grt1+Cpx1+Pl1+Qz developed at conditions of 0.51–0.85 GPa and 500–700°C and is preserved largely as a static replacement of relict igneous phases (Opx, Pgt, Pl) in coronitic textures. An M2 assemblage characterized by Grt2+Pl2±Cpx2+Hbl+Scp+Qz developed at 0.86–1.00 GPa and 660–730°C coincided with fluid flow and deformation associated with shear zone development. Microstructural observations in marginal protomylonite/mylonite and laminated ultramylonite suggest a shear zone evolution that involved (1) nucleation from pre‐existing fractures that were sites for major fluid infiltration, (2) initial widening coincident with grain‐size reduction by microfracturing, dislocation creep, and synkinematic metamorphic reaction by solution transfer, and (3) a switch in the dominant deformation mechanisms active in the ultramylonite from grain‐size insensitive mechanisms to grain‐size sensitive granular flow accommodated by fluid‐assisted diffusion. Throughout this evolution, the effective bulk compositions of the rock volumes responding to metamorphism changed through a combination of mechanical and metasomatic processes.  相似文献   

2.
A lower amphibolite Alpine shear zone from the Fibbia metagranite (Gotthard Massif, Central Alps) has been studied to better understand the parameters controlling strain localization in granitic rocks. The strain gradient on the metre‐scale shows an evolution from a weakly deformed metagranite (QtzI–KfsI–AbI–BtI ± PlII–ZoI–PhgI–Grt) to a fine banded ultramylonite (QtzII–KfsII–AbII–PlII–BtII–PhgII ± Grt–ZoII). Strain localization is coeval with dynamic recrystallization of the quartzofeldspathic matrix and a modal increase in mica, at the expense of K‐feldspar. The continuous recrystallization of plagioclase during deformation into a very fine‐grained assemblage forming anastomosed ribbons is interpreted as the dominant process in the shear zone initiation and development. The shear zone initiated under closed‐system conditions with the destabilization of metastable AbI–ZoI porphyroclasts into fine‐grained (20–50 μm sized) AbII–PlII aggregates, and with minor crystallization of phengite at the expense of K‐feldspar. The development of the shear zone requires a change in state of the system, which becomes open to externally derived fluids and mass transfer. Indeed, mass balance calculations and thermodynamic modelling show that the ultramylonite is characterized by gains in CaO, FeO and H2O. The progressive input of externally derived CaO drives the continuous metamorphic recrystallization of the fine‐grained AbII–PlII aggregate into a more PlII‐rich and finer aggregate. Input of water favours the crystallization of phengite at the expense of K‐feldspar to form an interconnected network of weak phases. Thus, recrystallization of 50% of the bulk rock volume would induce a decrease of the strength of the rock that might contribute to the development of the shear zone. This study emphasizes the major role of metamorphic reactions and more particularly plagioclase on strain localization process. Plagioclase represents at least one‐third of the bulk rock volume in granitic systems and forms a stress‐supporting framework that controls the rock rheology. Therefore, recrystallization of plagioclase due to changes in P–T conditions and/or bulk composition must be taken into account, together with quartz and K‐feldspar, in order to understand strain localization processes in granites.  相似文献   

3.
The Tres Arboles ductile fault zone in the Eastern Sierras Pampeanas, central Argentina, experienced multiple ductile deformation and faulting events that involved a variety of textural and reaction hardening and softening processes. Much of the fault zone is characterized by a (D2) ultramylonite, composed of fine‐grained biotite + plagioclase, that lacks a well‐defined preferred orientation. The D2 fabric consists of a strong network of intergrown and interlocking grains that show little textural evidence for dislocation or dissolution creep. These ultramylonites contain gneissic rock fragments and porphyroclasts of plagioclase, sillimanite and garnet inherited from the gneissic and migmatitic protolith (D1) of the hangingwall. The assemblage of garnet + sillimanite + biotite suggests that D1‐related fabrics developed under upper amphibolite facies conditions, and the persistence of biotite + garnet + sillimanite + plagioclase suggests that the ultramylonite of D2 developed under middle amphibolite facies conditions. Greenschist facies, mylonitic shear bands (D3) locally overprint D2 ultramylonites. Fine‐grained folia of muscovite + chlorite ± biotite truncate earlier biotite + plagioclase textures, and coarser‐grained muscovite partially replaces relic sillimanite grains. Anorthite content of shear band (D3) plagioclase is c. An30, distinct from D1 and D2 plagioclase (c. An35). The anorthite content of D3 plagioclase is consistent with a pervasive grain boundary fluid that facilitated partial replacement of plagioclase by muscovite. Biotite is partially replaced by muscovite and/or chlorite, particularly in areas of inferred high strain. Quartz precipitated in porphyroclast pressure shadows and ribbons that help define the mylonitic fabric. All D3 reactions require the introduction of H+ and/or H2O, indicating an open system, and typically result in a volume decrease. Syntectonic D3 muscovite + quartz + chlorite preferentially grew in an orientation favourable for strain localization, which produced a strong textural softening. Strain localization occurred only where reactions progressed with the infiltration of aqueous fluids, on a scale of hundreds of micrometre. Local fracturing and microseismicity may have induced reactivation of the fault zone and the initial introduction of fluids. However, the predominant greenschist facies deformation (D3) along discrete shear bands was primarily a consequence of the localization of replacement reactions in a partially open system.  相似文献   

4.
The Greiner shear zone in the Tauern Window, Eastern Alps, changes from a zone of distributed (dominantly sinistral) shear in supracrustal rocks to a series of narrow, gully forming dextral splays where it enters basement gneisses. Within these splays, granodiorite is transformed into quartz‐poor biotite and/or chlorite schists, reflecting hydration, removal of Si, Ca and Na, and concentration of Fe, Mg and Al. Stable isotope analyses show a prominent increase in δD and a decrease in δ18O from granodiorite into the shear zones. These changes indicate significant channelized flow of an externally derived, low‐δ18O, high‐δD fluid through the shear zones. The shear zone schists are chemically similar to blackwall zones developed around serpentinite bodies elsewhere in the Greiner zone and the stable isotope data support alteration via serpentinite‐derived fluid. Monazite in schist from one shear zone yields spot dates of 29–20 Ma, indicating that the fluid influx and switch from sinistral to dextral shear occurred at or shortly after the thermal peak of the Alpine orogeny (c. 30 Ma). We suggest that Alpine metamorphism of serpentinites released large amounts of high‐δD, low‐δ18O, Si‐undersaturated, Fe + Mg‐saturated fluids that became channelized along prior zones of weakness in the granodiorite. Infiltration of this fluid facilitated growth of chlorite and biotite, which in turn localized later dextral strain in the narrow splays via cleavage‐parallel slip. This dextral strain event can be linked to other structures that accommodated tectonic escape of major crustal blocks during dextral transpression in the Eastern Alps. This study shows that serpentinite devolatilization can play an important role in modifying both the chemistry and rheology of surrounding rocks during orogenesis.  相似文献   

5.
蛇尾剪切带中糜棱岩的质量平衡分析表明:(1)以Al_2O_3守恒为限制条件,该剪切带损失了10％土的质量和体积,糜棱岩类有Na_2O,Zr,Sr的获得;SiO_2,TiO_2,FeO,Fe_2O_3,MgO,MnO,CaO,K_2O及Co,Ni,V,Cr,Cu,Y则损失了;(2)从初糜棱岩-糜棱岩,初糜棱岩-超糜棱岩和糜棱岩-超糜棱岩得出的质量等比线显示,糜棱岩类之间没有明显的质量和体积损失。糜棱岩组分的得失主要发生在初糜棱岩阶段,同初糜棱岩相比,糜棱岩、超糜棱岩有CaO的获得,FeO,MgO,TiO_2,Cr,Co,V,Y微弱的获得,Na_2O则有轻微的损失。  相似文献   

6.
Quantitative X‐ray maps of composition from a chlorite, K‐white mica, albite, quartz and garnet bearing thin section from a Sambagawa blueschist facies metapelite were combined with a multi‐equilibrium calculation method to calculate a P–T‐Fe3+/Fe2+‐deformation map at the millimetre scale. The studied sample was chosen because elongated chlorite crystallization tails (pressure shadows) rimmed by phengite are present, which is an appropriate assemblage for the quantification of the P–T evolution. Chlorite temperature and Fe3+ content maps were calculated by successive iterations for each pixel analysis of Fe3+ until convergence of the four chlorite‐quartz‐H2O equilibria that can be written using the Fe‐ and Mg‐amesite, clinchlore, daphnite and sudoite chlorite end‐members. The calculated map of Fe2+/Fe3+ in chlorite is in good qualitative agreement with the in situ mapping of this ratio using XANES (X‐ray absorption near edge structure) techniques. The temperature map indicates that high temperature chlorite zones with low Fe3+ contents alternate with lower temperature zones and higher Fe3+ contents in the crystallization tail. Late fractures perpendicular to the elongation axis of the tail are filled by very low temperature chlorite (<250 °C) showing Fe3+/Fetotal up to 0.4. Groups of chlorite and mica pixels were then identified based on compositional and structural criteria, and a P–T‐deformation map was calculated using representative analyses of these groups. The calculated P–T‐deformation map suggests that in contrast to chlorite, the composition of most mica did not change significantly during exhumation. Mica reequilibrated in late EW shear bands only. EW shearing was already active at 0.1 GPa, 500 °C, which corresponds to the peak temperature (and probably pressure) conditions, at reduced redox conditions. The intensity of deformation probably decreased with decrease in temperature to ～350–400 °C. At this temperature, a second main deformation event corresponding to a further EW stretching occurred and was still active below 250 °C and more oxidizing conditions. These results indicate that the scale at which P–T data can be obtained is now close to the scale of observation of structural geologists. A close link between deformation and mineral reaction is therefore possible at the microscopic scale, which provides information about the relationship between deformation and mineral reactivity, the modalities of deformation with time and the P–T conditions at which it occurred.  相似文献   

7.
The Mt. Emilius klippe (Western Alps, Italy) corresponds to a segment of the stretched Adriatic continental margin metamorphosed at granulite facies during Permian. This slice was subducted during the early Cenozoic Alpine subduction with the underlying eclogite facies remnants of the Tethyan seafloor (Zermatt‐Saas zone). Near the base of the Mt. Emilius massif, there is a shear zone with eclogite facies hydrofracture systems associated with deformation‐induced re‐equilibration of granulites during high‐P metamorphism. In the basal part of the massif, a pluri‐hectometre domain of sheared mafic boudins is hosted in the granulitic paragneiss. In these mafic boudins, there are garnetites, garnet veins and clinopyroxenites, as well as clinozoisite and calcite veins. These features record multiple events of fracture opening, brecciation, boudinage and parallelization of structures coevally with fluid–rock interaction, metasomatism and volume change. This integrated petrological, micro‐textural and geochemical investigation illustrates the multiplicity and the chemical variability of fluid sources during prograde to peak metamorphic evolution in the lawsonite–eclogite‐facies field (at ~2.15–2.4 GPa, 500–550 °C) during subduction of the Mt. Emilius slice. The calcite veins crosscutting the garnetites have relatively low δ18OVSMOW values (～+6.5‰) near those for marble layers (and nearby calcsilicates) embedded within the metasomatized granulites (+8 to +10‰). It is proposed that infiltration of externally‐derived H2O‐rich fluids derived from the plate interface flushed the marbles, promoting decarbonation followed by short‐distance transport and re‐precipitation along garnetite fractures. This study highlights the importance of inherited structural heterogeneities (such as mafic bodies or sills) in localizing deformation, draining fluids from the downgoing plate and creating long‐lasting mechanical instabilities during subduction zone deformation.  相似文献   

8.
Semi‐pelitic rocks ranging in grade from the prehnite–pumpellyite to the greenschist facies from south‐eastern Otago, New Zealand, have been investigated in order to evaluate the reactions leading to formation and breakdown of stilpnomelane. Detrital grains of mica and chlorite along with fine‐grained authigenic illite and chlorite occur in lower‐grade rocks with compactional fabric parallel to bedding. At higher grades, detrital grains have undergone dissolution, and metamorphic phyllosilicates have crystallized with preferred orientation (sub)parallel to bedding, leading to slaty cleavage. Stilpnomelane is found in metapelites of the pumpellyite–actinolite facies and the chlorite zone of the greenschist facies, but only rarely in the biotite zone of the greenschist facies. Illite or phengite is ubiquitous, whereas chlorite occurs only rarely with stilpnomelane upgrade of the pumpellyite‐out isograd. Chemical and textural relationships suggest that stilpnomelane formed from chlorite, phengite, quartz, K‐feldspar and iron oxides. Stilpnomelane was produced by grain‐boundary replacement of chlorite and by precipitation from solution, overprinting earlier textures. Some relict 14 Å chlorite layers are observed by TEM to be in the process of transforming to 12 Å stilpnomelane layers. The AEM analyses show that Fe is strongly partitioned over Mg into stilpnomelane relative to chlorite (KD≈2.5) and into chlorite relative to phengite (KD≈1.9). Modified A′FM diagrams, projected from the measured phengite composition rather than from ideal KAl3Si3O10(OH)2, are used to elucidate reactions among chlorite, stilpnomelane, phengite and biotite. In addition to pressure, temperature and bulk rock composition, the stilpnomelane‐in isograd is controlled by variations in K, Fe3+/Fe2+, O/OH and H2O contents, and the locus of the isograd is expected to vary in rocks of different oxidation states and permeabilities. Biotite, quartz and less phengitic muscovite form from stilpnomelane, chlorite and phengite in the biotite zone. Projection of bulk rock compositions from phengite, NaAlO2, SiO2 and H2O reveals that they lie close to the polyhedra defined by the A′FM minerals and albite. Other extended A′FM diagrams, such as one projected from phengite, NaAlO2, CaAl2O4, SiO2 and H2O, may prove useful in the evaluation of other low‐grade assemblages.  相似文献   

9.
The mineralogy of a metasomatic sequence formed between ultramafic and quartzofeldspathic protoliths from the Southern Alps of New Zealand consists of a forsterite-antigorite core surrounded concentrically by zones of antigorite-magnesite, magnesite-talc, talc, tremolite, chlorite and muscovite with discontinuous pods of albite associated with the muscovite zone. On the basis of trace element data the original ultramafite-schist contact is positioned between the present tremolite and chlorite zones.An experimental study of a metasomatic system was undertaken in an attempt to clarify diffusion relationships during the metasomatic event. To simulate the natural event, ultramafic and quartzofeldspathic natural starting materials were tightly packed in a gold tube with a graphite layer between to allow later identification of the original lithological interface. Run conditions were 450° C at 2 kb for 40 days. Phase dissolution and formation were analysed petrographically and component migration was examined with the electron-microprobe. The following hierarchical scheme of component migration, phase dissolution and phase formation is delineated: CO2 migrates from the schist into the ultramafite forming first the antigorite-magnesite zone and then the magnesite-talc zone at higher values of CO2. These zones are then partially overprinted by the formation of talc due to SiO2 metasomatism. The SiO2 is supplied from the schist by the dissolution of quartz and albite in the region adjacent to the ultramafite. The tremolite zone forms at the expense of the metasomatic talc zone upon the introduction of CaO from the schist into the ultramafite. Concurrent with tremolite formation, MgO migrates from the ultramafite into the schist to form the chlorite metasomatic zone. The growth of the chlorite zone causes dissolution of the pre-metasomatic micas and displaces K2O from the chlorite zone further into the schist. Displaced K2O and Na2O are responsible for the formation of the muscovite zone and the albitite pods.  相似文献   

10.
Strain localization within shear zones may partially erase the rock fabric and the metamorphic assemblage(s) that had developed before the mylonitic event. In poly‐deformed basements, the loss of information on pre‐kinematic phases of mylonites hinders large‐scale correlations based on tectono‐metamorphic data. In this study, devoted to a relict unit of Variscan basement reworked within the nappe stack of the Northern Apennines (Italy), we investigate the possibility to reconstruct a complete pressure (P)–temperature (T)–deformation (D) path of mylonitic micaschist and amphibolite by integrating microstructural analysis, mineral chemistry and thermodynamic modelling. The micaschist is characterized by a mylonitic fabric with fine‐grained K‐white mica and chlorite enveloping mica‐fishes, quartz, and garnet pseudomorphs. Potassic white mica shows Mg‐rich cores and Mg‐poor rims. The amphibolite contains green amphibole+plagioclase+garnet+quartz+ilmenite defining S1 with a superposed mylonitic fabric localized in decimetre‐ to centimetre‐scale shear zones. Garnet is surrounded by an amphibole+plagioclase corona. Phase diagram calculations provide P–T constraints that are linked to the reconstructed metamorphic‐deformational stages. For the first time an early high‐P stage at >11 kbar and 510°C was constrained, followed by a temperature peak at 550–590°C and 9–10 kbar and a retrograde stage (<475°C, <7 kbar), during which ductile shear zones developed. The inferred clockwise P–T–D path was most likely related to crustal thickening by continent‐continent collision during the Variscan orogeny. A comparison of this P–T–D path with those of other Variscan basement occurrences in the Northern Apennines revealed significant differences. Conversely, a correlation between the tectono‐metamorphic evolution of the Variscan basement at Cerreto pass, NE Sardinia and Ligurian Alps was established.  相似文献   

11.
Stromatic metatexites occurring structurally below the contact with the Ronda peridotite (Ojén nappe, Betic Cordillera, S Spain) are characterized by the mineral assemblage Qtz+Pl+Kfs+Bt+Sil+Grt+Ap+Gr+Ilm. Garnet occurs in low modal amount (2–5 vol.%). Very rare muscovite is present as armoured inclusions, indicating prograde exhaustion. Microstructural evidence of melting in the migmatites includes pseudomorphs after melt films and nanogranite and glassy inclusions hosted in garnet cores. The latter microstructure demonstrates that garnet crystallized in the presence of melt. Re‐melted nanogranites and preserved glassy inclusions show leucogranitic compositions. Phase equilibria modelling of the stromatic migmatite in the MnO–Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2–O2–C (MnNCaKFMASHOC) system with graphite‐saturated fluid shows P–T conditions of equilibration of 4.5–5 kbar, 660–700 °C. These results are consistent with the complete experimental re‐melting of nanogranites at 700 °C and indicate that nanogranites represent the anatectic melt generated immediately after entering supersolidus conditions. The P–T estimate for garnet and melt development does not, however, overlap with the low‐temperature tip of the pure melt field in the phase diagram calculated for the composition of preserved glassy inclusions in garnet in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O (NCKFMASH) system. A comparison of measured melt compositions formed immediately beyond the solidus with results of phase equilibria modelling points to the systematic underestimation of FeO, MgO and CaO in the calculated melt. These discrepancies are present also when calculated melts are compared with low‐T natural and experimental melts from the literature. Under such conditions, the available melt model does not perform well. Given the presence of melt inclusions in garnet cores and the P–T estimates for their formation, we argue that small amounts (<5 vol.%) of peritectic garnet may grow at low temperatures (≤700 °C), as a result of continuous melting reactions consuming biotite.  相似文献   

12.
The Jiangzhuang ultrahigh‐pressure (UHP) metamorphic peridotite from south Sulu, eastern China occurs as a layer within gneiss with eclogite blocks, and consists of coarse‐grained garnet porphyroblasts and a fine‐grained matrix assemblage of garnet + forsterite + enstatite + diopside ± phlogopite ± Ti‐clinohumite ± magnesite. Both types of garnet are characterized by high MgO content and depletion of light rare earth element (LREE) and enrichment of heavy rare earth element, but the matrix garnet has lower MgO, TiO2 and higher Cr2O3 and REE contents. Diopside displays LREE enrichment, and has low but variable large‐ion lithophile element (LILE) contents. Phlogopite is a major carrier of LILE. Ti‐clinohumite contains high Nb, Ta, Cr, Ni, V and Co contents. The P–T conditions of 4.5–6.0 GPa and 850–950 °C were estimated for matrix mineral assemblages. Most peridotites are depleted in Al2O3, CaO and TiO2, and enriched in SiO2, K2O, REE and LILE. In contrast to phlogopite‐free peridotites, the phlogopite‐bearing peridotites have higher K2O, Zr, REE and LILE contents. Zircon occurs only in the phlogopite‐bearing peridotites, shows no zoning, with low REE contents and Th/U ratios, and yields tight U–Pb ages of 225–220 Ma, indicating the peridotites experienced consistent Triassic UHP metamorphism with subducted supercrustal rocks. These data demonstrate that the Jiangzhuang peridotites were derived from the depleted mantle wedge of the North China Craton, and experienced various degrees of metasomatism. The phlogopite‐free peridotites may have been subjected to an early cryptic metasomatism at UHP conditions of the mantle wedge, whereas the phlogopite‐bearing peridotites were subjected to a subsequent strong metasomatism, characterized by distinctly enrichment in LILE, LREE, Zr and K as well as the growth of zircon and volatile‐bearing minerals at UHP subduction conditions. The related metasomatism may have resulted from the filtration of fluids sourced mainly from deeply subducted supracrustal rocks.  相似文献   

13.
High‐pressure granulites are generally characterized by the absence of orthopyroxene. However, orthopyroxene is reported in a few high‐pressure, felsic–metapelitic granulites, such as the Huangtuling felsic high‐pressure granulite in the North Dabie metamorphic core complex in east‐central China, which rarely preserves the high‐pressure granulite facies assemblage of garnet + orthopyroxene + biotite + plagioclase + K‐feldspar + quartz. To investigate the effects of bulk‐rock composition on the stability of orthopyroxene‐bearing, high‐pressure granulite facies assemblages in the NCKFMASHTO (Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3) system, a series of P–T–X pseudosections based on the melt‐reintegrated composition of the Huangtuling felsic high‐pressure granulite were constructed. Calculations demonstrate that the orthopyroxene‐bearing, high‐pressure granulite facies assemblages are restricted to low XAl [Al2O3/(Na2O + CaO + K2O + FeO + MgO + Al2O3) < 0.35, mole proportion] or high XMg [MgO/(MgO + FeO) > 0.85] felsic–metapelitic rock types. This study also reveals that the XAl values in the residual felsic–metapelitic, high‐pressure granulites could be significantly reduced by a high proportion of melt loss. We suggest that orthopyroxene‐bearing, high‐pressure granulites occur in residual overthickened crustal basement under continental subduction–collision zones and arc–continent collision belts.  相似文献   

14.
The assemblage hornblende+white mica occurs in graphite-free schists at two localities in the southwest corner of the Tauern Window, Eastern Alps. In interbedded graphitic layers (1 mm to 1 m thick), however, hornblende is typically replaced by pseudomorphs of biotite+plagioclase +epidote±chlorite+staurolite in the presence of white mica. Garnets adjacent to these pseudomorphs have pronounced growth discontinuities near their rims, in contrast to the continuously zoned garnets in nongraphitic layers. These observations imply that reactions of the type hbl+white micagar+bio+plag+epid±chl±staur +H2O occurred in the graphitic samples, but that hbl+white mica remained stable in graphite-free layers.Calculation of the equilibrium constants for solid phases in five dehydration equilibria at locality 1 indicates thata(H2O) in the nongraphitic layers was 6 to 11 times greater thana(H2O) in the graphitic layers. Similar calculations involving six dehydration equilibria at locality 2 show no difference ina(H2O) between layers at the conditions of final equilibration. Initial differences in fluid composition maintained between the graphitic and nongraphitic layers caused the hbl+white mica reaction to occur at differentP-T conditions in different horizons of the schists.These data indicate that systematic differences in fluid composition were generated during metamorphism of the interlayered graphitic and non-graphitic schists but were subsequently homogenized at locality 2. The heterogeneities could initially have been produced while the rocks were in theP-T field of CO2-H2O immiscibility. Development of a penetrative, layer-parallel shear foliation at this time would have prevented subsequent mixing of the fluids across layers after temperatures exceeded the consolute temperature in the CO2-H2O system. Late-stage homogenization of fluids at locality 2 is thought to reflect loss of the buffer capacity of the mineral assemblage in response to total consumption of hornblende.  相似文献   

15.
Abstract: The hydrothermal alteration patterns associating with the gold prospect hosted by metavolcanics in the Dungash area, Eastern Desert of Egypt, were investigated in order to assign their relationship to mineralization. The metavolcanics of andesitic composition are generated by regional metamorphism of greenschist facies superimposed by hydrothermal activity. Epidote and chlorite are metamorphic minerals, whereas sericite, carbonates, and chlorite are hydrothermal alteration minerals. The auriferous quartz vein is of NEE‐SWW trend and cuts mainly the andesitic metavolcanics, but sometimes extends to the neighbouring metapyroclastics and metasediments. Quartz‐sericite, sericite, carbonate‐sericite, and chlorite‐sericite constitute four distinctive alteration zones which extend outwards from the mineralized quartz vein. The quartz‐sericite and sericite zones are characterized by high contents of SiO2, K2O, Rb, and As, the carbonate‐sericite zone is by high contents of CaO, Au, Cu, Cr, Ni, and Y, and the chlorite‐sericite zone is by high contents of MgO, Na2O, Zn, Ba, and Co. Gold and sulphide minerals are relatively more abundant in the carbonate‐sericite zone followed by the sericite one. The geochemistry of the alteration system was investigated using volume‐composition and mass balance calculations. The volume factors obtained for the different alteration zones, mentioned above (being 1.64, 1.19, 1.17, and 1.07, respectively), indicate that replacement had taken place with a volume gain. The mass balance calculations revealed addition of SiO2, K2O, As, Cu, Rb, Ba, Ni, and Y to the system as a whole and subtraction of Fe2O3 from the system. Initial high aK+ and aH+ for the invading fluids is suggested. As the fluids migrated into wallrocks, they became more concentrated in Mg, Ca, and Na with increasing activities of CO2 and S. The calculated loss‐gain data are in agreement with the microscopic observations. Breakdown of ferromagnesian minerals and feldspars in the quartz‐sericite, sericite, and chlorite‐sericite zones accompanied by loss in Mg, Fe, Ca, and Na under acidic conditions and low CO2/H2O ratio may obstruct the formation of carbonates and sulphides, and the precipitation of gold in these zones. The role of metamorphic fluids in the area is expected to be restricted to the liberation of Au and some associated elements from their hosts.  相似文献   

16.
邱添  朱永峰 《岩石学报》2017,33(12):3829-3841
新疆萨尔托海石英菱镁岩产在达拉布特蛇绿混杂岩带中,是蛇纹岩在剪切带深部发生热液交代作用的产物。蛇纹岩先转变为滑石片岩,再进一步转变为石英菱镁岩。石英菱镁岩局部发生剪切变形,形成糜棱岩化石英菱镁岩。与蛇纹岩相比,石英菱镁岩的MgO和SiO_2含量降低,Al_2O_3和CaO含量升高;而糜棱岩化石英菱镁岩的MgO含量较石英菱镁岩降低,Al_2O_3和SiO_2含量较石英菱镁岩升高。微量元素地球化学对比研究表明石英菱镁岩继承了蛇纹岩的微量元素特征;而糜棱岩化石英菱镁岩的微量元素含量较蛇纹岩发生了显著变化,稀土元素、高场强元素和自然金的含量明显升高,指示这些元素在剪切变形过程中发生迁移富集。剪切变形伴随强烈的流体/岩石反应,并导致剪切带流体组成和物理化学性质发生改变,从而影响矿物结晶或分解,并控制微量元素的带入迁出。蛇纹岩转变为石英菱镁岩的过程释放Au,可为糜棱岩化石英菱镁岩中的金矿化提供成矿元素。  相似文献   

17.
The influx of a H2O–CO2‐dominated fluid into actinolite‐bearing metabasic rocks during greenschist facies metamorphism in the Kalgoorlie area of Western Australia resulted in a zoned alteration halo around inferred fluid conduits that contain gold mineralisation. The alteration halo is divided into two outer zones, the chlorite zone and the carbonate zone, and an inner pyrite zone adjacent to the inferred fluid conduits. Reaction between the fluid and the protolith resulted in the breakdown of actinolite and the development of chlorite, dolomite, calcite and siderite. In addition, rocks in the pyrite zone developed muscovite‐bearing assemblages as a consequence of the introduction of potassium by the fluid. Mineral equilibria calculations undertaken using the computer software thermocalc in the model system Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–CO2 show that mineral assemblages in the outer zones of the alteration halo are consistent with equilibrium of the protoliths with a fluid of composition XCO2 = CO2/(CO2 + H2O) = 0.1–0.25 for temperatures of 315–320 °C. The inner zone of the alteration halo reflect equilibrium with a fluid of composition XCO2≈ 0.25. Fluid‐rock buffering calculations show that the alteration halo is consistent with interaction with a single fluid composition and that the zoned structure of the halo reflects the volume of this fluid with which the rocks reacted. This fluid is likely to have also been the one responsible for the gold mineralisation at Kalgoorlie.  相似文献   

18.
Abstract. This paper presents a measurement and study of Kübler Indexes (KI) of illite, "crystallinities" of chlorite (ChC), and apparent mean crystallite sizes and lattice strain of both illite and chlorite of the Jinshan ductile shear zone in the Jinshan gold deposit of East China. It is found that the KI values and apparent mean crystallite sizes of illite decrease and the lattice strain of chlorite apparently increase, whereas the apparent mean crystallite sizes of chlorite and the lattice strain of illite remain constant, from altered mylonite to altered and higher-strained ultramylonite in the shear zone. Only slight decrease of ChC is observed.
An obvious negative correlation exists between KI and apparent mean crystallite sizes in altered mylonite with lower strain, whereas a positive correlation is found between ChC and apparent mean crystallite sizes in altered ultramylonite with higher strain. No any correlations between KI and lattice strain exist, whereas a negative correlation and a positive correlation between ChC and lattice strain occur separately in the altered mylonite and ultramylonite. It is suggested that illite Kiibler Indexes and chlorite "crystallinities" most likely reflect deformation behaviors and mechanisms of altered rocks although other factors involving water/rock ratio may apply as well.  相似文献   

19.
Abstract Metapelites in the Altavista area, southwest Virginia Piedmont, USA, underwent allochemical hydrothermal retrograde metamorphism in synmetamorphic shear zones. The metapelites of the Evington Group were metamorphosed in a prograde sequence of chlorite, staurolite, and sillimanite zones. Garnet–biotite geothermometry and phase relations support eastward increasing metamorphic grade, ranging from 570° C in the staurolite zone to 650° C in the sillimanite zone at c. 5.8 kbar. Sillimanite-zone rocks later underwent progressive retrogression around shear zones which acted as fluid conduits. Retrograde assemblages are successively zoned around the shear zones with staurolite-, chloritoid- and kyanite-bearing assemblages. The shear zones commonly contain kyanite or tourmaline veins. Applicable phase equilibria indicate that retrogression occurred during isobaric cooling through c. 200–270° C. Rock compositional changes with retrogression occurred in steps: SiO2 was gained in the early stages of the retrogression but lost in the late stages; Al2O3, K2O, and H2O were increasingly gained through the sequence; CaO was increasingly lost. Addition of H2O and decreasing temperatures resulted in new ferromagnesian minerals (staurolite, chloritoid, chlorite) and changes in H2O, SiO2, Al2O3, K2O, and CaO contents produced muscovite and sodic plagioclase. Subsequent to prograde metamorphism, deeply derived fluids migrated upwards along shear zones, providing fluid and energy for the retrograde reactions. The sheared rocks underwent fluid infiltration with fluid fluxes of 1.8 × 107–4.3 × 107 cm3/cm2 corresponding to minimum estimated fluid-to-rock ratios of 7.5–21 as a function of position within the shear zone. Fluid flow was from high to low temperature early and low to high temperature later in the retrogression.  相似文献   

20.
The stability of pumpellyite + actinolite or riebeckite + epidote + hematite (with chlorite, albite, titanite, quartz and H2O in excess) mineral assemblages in LTMP metabasite rocks is strongly dependent on bulk composition. By using a thermodynamic approach (THERMOCALC), the importance of CaO and Fe2O3 bulk contents on the stability of these phases is illustrated using P–T and P–X phase diagrams. This approach allowed P–T conditions of ～4.0 kbar and ～260 °C to be calculated for the growth of pumpellyite + actinolite or riebeckite + epidote + hematite assemblages in rocks containing variable bulk CaO and Fe2O3 contents. These rocks form part of an accretionary wedge that developed along the east Australian margin during the Carboniferous–Triassic New England Orogen. P–T and P–X diagrams show that sodic amphibole, epidote and hematite will grow at these conditions in Fe2O3‐saturated (6.16 wt%) metabasic rocks, whereas actinolite and pumpellyite will be stable in CaO‐rich (10.30 wt%) rocks. With intermediate Fe2O3 (～3.50 wt%) and CaO (～8.30 wt%) contents, sodic amphibole, actinolite and epidote can coexist at these P–T conditions. For Fe2O3‐saturated rocks, compositional isopleths for sodic amphibole (Al3+ and Fe3+ on the M2 site), epidote (Fe3+/Fe3+ + Al3+) and chlorite (Fe2+/Fe2+ + Mg) were calculated to evaluate the efficiency of these cation exchanges as thermobarometers in LTMP metabasic rocks. Based on these calculations, it is shown that Al3+ in sodic amphibole and epidote is an excellent barometer in chlorite, albite, hematite, quartz and titanite buffered assemblages. The effectiveness of these barometers decreases with the breakdown of albite. In higher‐P stability fields where albite is absent, Fe2+‐Mg ratios in chlorite may be dependent on pressure. The Fe3+/Al and Fe2+/Mg ratios in epidote and chlorite are reliable thermometers in actinolite, epidote, chlorite, albite, quartz, hematite and titanite buffered assemblages.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号