首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献，搜索用时 125 毫秒
1.
An earthquake of Ms 8 struck Wenchuan County, western Sichuan, China, on May 12^th, 2008 and resulted in long surface ruptures （〉300 km）. The first-hand observations about the surface ruptures produced by the earthquake in the worst-hit areas of Yingxiu, Beichuan and Qingchuan, ascertained that the causative structure of the earthquake was in the central fault zones of the Longmenshan tectonic belt. Average co-seismic vertical displacements along the individual fault of the Yingxiu-Beiehuan rupture zone reach 2.514 m and the cumulative vertical displacements across the central and frontal Longmenshan fault belt is about 5-6 m. The surface rupture strength was reduced from north of Beichuan to Qingchuan County and shows 2-3 m dextral strike-slip component. The Wenchuan thrust-faulting earthquake is a manifestation of eastward growth of the Tibetan Plateau under the action of continuous convergence of the Indian and Eurasian continents.  相似文献   

2.
Abstract: On May 12th, 2008, the Mw7.9 Wenchuan earthquake ruptured the Beichuan, Pengguan and Xiaoyudong faults simultaneously along the middle segment of the Longmenshan thrust belt at the eastern margin of the Tibetan plateau. Field investigations constrain the surface rupture pattern, length and offsets related to the Wenchuan earthquake. The Beichuan fault has a NE-trending right-lateral reverse rupture with a total length of 240 km. Reassessment yields a maximum vertical offset of 6.5±0.5 m and a maximum right-lateral offset of 4.9±0.5 m for its northern segment, which are the largest offsets found; the maximum vertical offset is 6.2±0.5 m for its southern segment. The Pengguan fault has a NE-trending pure reverse rupture about 72 km long with a maximum vertical offset of about 3.5 m. The Xiaoyudong fault has a NW-striking left-lateral reverse rupture about 7 km long between the Beichuan and Pengguan faults, with a maximum vertical offset of 3.4 m and left-lateral offset of 3.5 m. This pattern of multiple co-seismic surface ruptures is among the most complicated of recent great earthquakes and presents a much larger danger than if they ruptured individually. The rupture length is the longest for reverse faulting events ever reported.  相似文献   

3.
Abstract: On May 12th, 2008, the Mw7.9 Wenchuan earthquake ruptured the Beichuan, Pengguan and Xiaoyudong faults simultaneously along the middle segment of the Longmenshan thrust belt at the eastern margin of the Tibetan plateau. Field investigations constrain the surface rupture pattern, length and offsets related to the Wenchuan earthquake. The Beichuan fault has a NE-trending right-lateral reverse rupture with a total length of 240 km. Reassessment yields a maximum vertical offset of 6.5±0.5 m and a maximum right-lateral offset of 4.9±0.5 m for its northern segment, which are the largest offsets found; the maximum vertical offset is 6.2±0.5 m for its southern segment. The Pengguan fault has a NE-trending pure reverse rupture about 72 km long with a maximum vertical offset of about 3.5 m. The Xiaoyudong fault has a NW-striking left-lateral reverse rupture about 7 km long between the Beichuan and Pengguan faults, with a maximum vertical offset of 3.4 m and left-lateral offset of 3.5 m. This pattern of multiple co-seismic surface ruptures is among the most complicated of recent great earthquakes and presents a much larger danger than if they ruptured individually. The rupture length is the longest for reverse faulting events ever reported.  相似文献   

4.
On May 12th,2008,the M_w7.9 Wenchuan earthquake ruptured the Beichuan,Pengguan and Xiaoyudong faults simultaneously along the middle segment of the Longmenshan thrust belt at the eastern margin of the Tibetan plateau.Field investigations constrain the surface rupture pattern, length and offsets related to the Wenchuan earthquake.The Beichuan fault has a NE-trending rightlateral reverse rupture with a total length of 240 km.Reassessment yields a maximum vertical offset of 6.5±0.5 m and a maximum right-lat...  相似文献   

5.
The 12 May 2008 Wenchuan Ms8.0 earthquake produced surface displacements along the causative fault, the Yingxiu–Beichuan Fault, which are up to several meters near the fault. Because of the large gradient, satellite synthetic aperture radar (SAR) interferometric data are strongly incoherent; the usual SAR interferometry method does not allow such displacements to be measured. In the present study, we employed another approach, the technique based on pixel offset tracking, to solve this problem. The used image data of six tracks are from the Advanced Land Observing Satellite, Phased Array type L-band Synthetic Aperture Radar (ALOS/ PALSAR) dataset of Japan. The results show that the entire surface rupture belt is 238 km long, extending almost linearly in a direction of 42° north–east. It is offset left laterally by a north–west-striking fault at Xiaoyudong, and turns at Gaochuan, where the rupture belt shifts toward the south by 5 km, largely keeping the original trend. In terms of the features of the rupture traces, the rupture belt can be divided into five sections and three types. Among them, the Beichuan–Chaping and Hongkou–Yingxiu sections are relatively complex, with large widths and variable traces along the trend. The Pingtong–Nanba and Qingping–Jingtang sections appear uniform, characterized by straight traces and small widths. West of Yingxiu, the rupture traces are not clear. North of the rupture belt, surface displacements are 2.95 m on average, mostly 2–3.5 m, with 7–9 m the maximum near Beichuan. South of the rupture belt, the average displacement is 1.75 m, dominated by 1–2 m, with 3–4 m at a few sites. In the north, the displacements in the radar line of sight are of subsidence, and in the south, they are uplifted, in accordance with a right-slip motion that moves the northern wall of the fault to the east, and the southern wall to the west, respectively. Along the Guanxian–Jiangyou Fault, there is a uplift zone in the radar line of sight, which is 66 km long, 1.5–6 km wide, and has vertical displacements of approximately 2 m, but no observable rupture traces.  相似文献   

6.
At 08:02 on April 20, 2013, a Ms7.0 earthquake occurred in Lushan, Ya'an, in the Longmenshan fault zone, Sichuan. The epicenter was located between Taiping Town and Shuangshi Town, Lushan County and the maximum earthquake intensity at the epicenter reached class IX. Field investigations in the epicenter area found that, although buildings were seriously damaged, no obvious surface rupture structure was produced, only some ground fissures and sand blows and water ejection phenomena being seen. An integrated analysis of high-resolution remote sensing image interpretation, mainshock and aftershock distribution, and focal mechanism solutions indicated that this earthquake was an independent rupturing event in the southwestern segment of the Longmenshan fault zone, belonging to the thrust-type earthquake. Ruptures occurred along the south-central segment of the Shuangshi-Dachuan fault and the principal rupture plane dipped SW at 33-43°. It is inferred that the Lushan earthquake might be related to the ramp activity of the basal detachment zone (13-19 km) of the Longmenshan fault zone. Historically, there occurred at least two Ms6-6.5 earthquakes along the Shuangshi-Dachuan fault zone; thus it is thought that the Lushan earthquake, different from the Wenchuan earthquake, was a characteristic one in the southwestern segment of the Longmenshan fault zone. In-situ stress measurements indicated the Lushan earthquake was the result of stress release of the southwestern segment of the Longmenshan fault zone after the Wenchuan earthquake. This paper analyzes the tectonic setting of the seismogenic structure of this earthquake.  相似文献   

7.
Dextral-slip thrust movement of the Songpan-Garze terrain over the Sichuan block caused the Ms 8.0 Wenchuan earthquake of May 12, 2008 and offset the Central Longmenshan Fault (CLF) along a distance of-250 km. Displacement along the CLF changes from Yingxiu to Qingchuan. The total oblique slip of up to 7.6 m in Yingxiu near the epicenter of the earthquake, decreases northeastward to 5.3 m, 6.6 m, 4.4 m, 2.5 m and 1.1 m in Hongkou, Beichuan, Pingtong, Nanba and Qingchuan, respectively. This offset apparently occurred during a sequence of four reported seismic events, EQ1-EQ4, which were identified by seismic inversion of the source mechanism. These events occurred in rapid succession as the fault break propagated northeastward during the earthquake. Variations in the plunge of slickensides along the CLF appear to match these events. The Mw 7.5 EQ1 event occurred during the first 0-10 s along the Yingxiu-Hongkou section of the CLF and is characterized by 1.7 m vertical slip and vertical slickensides. The Mw 8.0 EQ2 event, which occurred during the next 10-42 s along the Yingxiu-Yanziyan section of the CLF, is marked by major dextral-slip with minor thrust and slickensides plunging 25°-35° southwestward. The Mw 7.5 EQ3 event occurred during the following 42-60 s and resulted in dextral-slip and slickensides plunging 10° southwestward in Beichuan and plunging 73° southwestward in Hongkou. The Mw 7.7 EQ4 event, which occurred during the final 60-95 s along the Beichuan-Qingchuan section of the CLF, is characterized by nearly equal values of dextral and vertical slips with slickensides plunging 45°-50° southwestward. These seismic events match and evidently controlled the concentrations of landslide dams caused by the Wenchuan earthquake in Longmenshan Mountains.  相似文献   

8.
The Garzê–Yushu strike-slip fault in central Tibet is the locus of strong earthquakes(M 7). The deformation and geometry of the co-seismic surface ruptures are reflected in the surface morphology of the fault and depend on the structure of the upper crust as well as the pre-existing tectonics. Therefore, the most recent co-seismic surface ruptures along the Garzê–Yushu fault zone(Dangjiang segment) reveal the surface deformation of the central Tibetan Plateau. Remote sensing images and field investigations suggest a 85 km long surface rupture zone(striking NW-NWW), less than 50 m wide, defined by discontinuous fault scarps, right-stepping en echelon tensional cracks and left-stepping mole tracks that point to a left-lateral strike-slip fault. The gullies that cross fault scarps record systematic left-lateral offsets of 1.8 m to 5.0 m owing to the most recent earthquake, with moment magnitude of about M 7.5, in the Dangjiang segment. Geological and geomorphological features suggest that the spatial distribution of the 1738 co-seismic surface rupture zone was controlled by the pre-existing active Garzê–Yushu fault zone(Dangjiang segment). We confirm that the Garzê–Yushu fault zone, a boundary between the Bayan Har Block to the north and the Qiangtang Block to the south, accommodates the eastward extrusion of the Tibetan Plateau and generates strong earthquakes that release the strain energy owing to the relative motion between the Bayan Har and Qiangtang Blocks.  相似文献   

9.
Abstract: There are two co-seismic faults which developed when the Wenchuan earthquake happened. One occurred along the active fault zone in the central Longmen Mts. and the other in the front of Longmen Mts. The length of which is more than 270 km and about 80 km respectively. The co-seismic fault shows a reverse flexure belt with strike of N45°–60°E in the ground, which caused uplift at its northwest side and subsidence at the southeast. The fault face dips to the northwest with a dip angle ranging from 50° to 60°. The vertical offset of the co-seismic fault ranges 2.5–3.0 m along the Yingxiu-Beichuan co-seismic fault, and 1.5–1.1 m along the Doujiangyan-Hanwang fault. Movement of the co-seismic fault presents obvious segmented features along the active fault zone in central Longmen Mts. For instance, in the section from Yingxiu to Leigu town, thrust without evident slip occurred; while from Beichuan to Qingchuan, thrust and dextral strike-slip take place. Main movement along the front Longmen Mts. shows thrust without slip and segmented features. The area of earthquake intensity more than IX degree and the distribution of secondary geological hazards occurred along the hanging wall of co-seismic faults, and were consistent with the area of aftershock, and its width is less than 40km from co-seismic faults in the hanging wall. The secondary geological hazards, collapses, landslides, debris flows et al., concentrated in the hanging wall of co-seismic fault within 0–20 km from co-seismic fault.  相似文献   

10.
Abstract: Dextral-slip thrust movement of the Songpan-Garzê terrain over the Sichuan block caused the Ms 8.0 Wenchuan earthquake of May 12, 2008 and offset the Central Longmenshan Fault (CLF) along a distance of ~250 km. Displacement along the CLF changes from Yingxiu to Qingchuan. The total oblique slip of up to 7.6 m in Yingxiu near the epicenter of the earthquake, decreases northeastward to 5.3 m, 6.6 m, 4.4 m, 2.5 m and 1.1 m in Hongkou, Beichuan, Pingtong, Nanba and Qingchuan, respectively. This offset apparently occurred during a sequence of four reported seismic events, EQ1–EQ4, which were identified by seismic inversion of the source mechanism. These events occurred in rapid succession as the fault break propagated northeastward during the earthquake. Variations in the plunge of slickensides along the CLF appear to match these events. The Mw 7.5 EQ1 event occurred during the first 0–10 s along the Yingxiu-Hongkou section of the CLF and is characterized by 1.7 m vertical slip and vertical slickensides. The Mw 8.0 EQ2 event, which occurred during the next 10–42 s along the Yingxiu-Yanziyan section of the CLF, is marked by major dextral-slip with minor thrust and slickensides plunging 25°–35° southwestward. The Mw 7.5 EQ3 event occurred during the following 42–60 s and resulted in dextral-slip and slickensides plunging 10° southwestward in Beichuan and plunging 73° southwestward in Hongkou. The Mw 7.7 EQ4 event, which occurred during the final 60–95 s along the Beichuan-Qingchuan section of the CLF, is characterized by nearly equal values of dextral and vertical slips with slickensides plunging 45°–50° southwestward. These seismic events match and evidently controlled the concentrations of landslide dams caused by the Wenchuan earthquake in Longmenshan Mountains.  相似文献   

11.
汶川地震地表破裂影响带调查与建筑场地避让宽度探讨   总被引：1，自引：0，他引：1  
5.12汶川Ms8.0级地震沿龙门山中央断裂带形成长度约270km的地表破裂带,破裂带垂直和水平位移一般为1.0～5.0m,最大可达9.8m。在地表破裂带附近,建筑物破坏严重。笔者系统调查了龙门山中央断裂带地表破裂的垂直和水平位移以及地震地表破裂影响带宽度,并采用物探测试方法对部分影响带宽度进行了验证。统计结果表明,汶川地震地表破裂影响带宽度主要集中在16～60m,影响带宽度(D)与垂直位移(H)具有较好的线性关系,即D=10.11H+16.0。对于逆冲性质为主的地震地表破裂而言,上盘影响带宽度与下盘的比值一般为3:1～2:1,据此可确定地表破裂带上、下盘的避让带宽度。笔者根据现场调查并借鉴国外经验提出,上盘避让宽度下限一般不应低于15m,下盘避让宽度下限不应低于10m。本项研究对于汶川地震灾后重建场地选址具有重要的实际意义。  相似文献   

12.
介绍了应用雷达卫星影像对四川龙门山活动断裂开展断错地貌判读结果,展示了龙门山构造带4条分支断裂9个点位的雷达卫星影像图像、11个点位的野外调查结果及6个点位与断层活动性有关的地层测年。在11个野外调查点位中,位于青城山北面4条断裂8个点位均出现2008年5.12汶川MS8.0地震的地表破裂,其中包括沿青川断裂青溪段及金山寺断层沟谷出现的两条地表破裂,沿后山断裂带茂县北断层和汶川南七盘沟断层出现的地表破裂;   沿中央断裂带北川和小鱼洞南2个点位出现的地表破裂;   以及沿前山断裂汉旺台地前缘和青城山山前地表破裂点位。在这些地表破裂中,中央断裂带地表垂直位移为 2～6m,青川断裂、后山断裂和前山断裂多数段地表断错垂直位移量为 10～40cm。后者位移量虽小,也不应被忽视。本项研究结果表明,雷达卫星影像显示青川断裂与后山断裂带和中央断裂带右旋走滑明显。雷达卫星影像实地调查表明,前山断裂带南段的水口场－横山庙断裂带醒目的断错地貌引人注目。  相似文献   

13.
四川汶川MS 8.0大地震地表破裂带的遥感影像解析   总被引：21，自引：1，他引：20  
付碧宏  时丕龙  张之武 《地质学报》2008,82(12):1679-1687
2008年5月12日发生于四川盆地西部龙门山断裂带的汶川MS 8.0级大地震造成巨大的人员伤亡和财产损失,并形成了空间上基本连续分布的地表破裂带（地震断层）。根据地表破裂带的解译标志及影像特征,我们充分利用震后中国科学院航空遥感飞机所获取的高分辨率航空遥感图像以及我国台湾福卫-2卫星遥感图像进行详细解译分析,并结合震后的多次野外科学考察与验证,初步查明了四川汶川MS 8.0级大地震所产生地表破裂带的空间分布特征。遥感解译分析表明汶川大地震产生的地表破裂带总计长约300 km,其几何学特征十分复杂,主要沿先存的NE走向活动断裂带呈不连续展布;变形特征以逆冲挤压为主兼具右旋走滑分量。按同震地表破裂带所在断裂带位置,可将其分为两条： 中央地表破裂带：沿映秀-北川断裂带分布,从西南开始呈北东向延伸至平武县水观乡石坎子北东一带,长约230 km,最大垂直位移量达6.0 m左右,最大右旋水平位移达5.8 m;山前地表破裂带：沿灌县-安县断裂带分布,由都江堰市向峨乡一带开始呈北东向延伸至安县雎水镇一带,长约70 km,以逆冲挤压为主,最大垂直位移量可达2.5 m。此外,遥感图像分析还表明上述地表破裂带与地质灾害分布在空间上具有十分密切的相关性,因此,挤压逆冲-走滑型地震断层的致灾效应研究是未来应该加以重视的研究课题。  相似文献   

14.
汶川地震（MS 8.0）地表破裂及其同震右旋斜向逆冲作用   总被引：45，自引：4，他引：41  
2008年5月12日14时28分,青藏高原东缘龙门山地区发生了震惊世界的汶川地震（MS 8.0）,地震不仅造成巨大的人员伤亡和财产损失,并形成了迄今为止空间上分布最为复杂、长度最大的逆冲型同震地表破裂带。通过多次野外考查表明,汶川地震（MS 8.0）在龙门山断裂带上至少使两条NE走向、倾向NW的映秀-北川断裂和灌县-安县断裂同时发生地表破裂,并沿映秀-北川断裂产生的地表破裂带长度约275 km,以逆冲运动伴随右旋走滑为其破裂特征,最大垂直位移量约11 m,最大右旋走滑位移量至少约12 m;沿灌县-安县断裂产生的地表破裂带长度约80 km,表现为纯逆冲运动的破裂特征,最大垂直位移量约4 m;另外发育一条长约6 km呈NW走向连接于映秀-北川破裂带和汉旺破裂带的小鱼洞破裂带,以左旋走滑兼有逆冲运动为特征。地表破裂基本沿袭早先活动断裂带上,并使早先抬高的地貌更加抬高,表明龙门山地区地震在同一断裂带上重复发生过,并且无数次地震活动（包括类似汶川MS 8.0地震的强震）的累积,逐渐形成了现今的龙门山。根据同震断裂面以及断裂面上的擦痕分析表明,汶川地震是由两次破裂事件叠加而成,初期破裂以逆冲运动为主,后期破裂以右旋走滑为主,这种破裂过程与地震波数据反演结果（陈运泰等,2008;Ji, 2008;王为民等,2008）一致。在地表破裂带南段（映秀—清平段）叠加了两次不同性质的破裂过程,北段（北川—南坝段）只反映了第二次破裂事件的过程。利用长期滑移速率与汶川地震同震位移对比,估算出在龙门山断裂带上类似汶川地震（MS 8.0）的强震复发周期为3000~6000 a。通过对比研究,西昆仑山、阿尔金山和东昆仑山与龙门山具有很相似的转换挤压构造特征,斜向逆冲作用是青藏高原周缘山脉快速崛起的主要机制。  相似文献   

15.
在龙门山中段小鱼洞地区映秀－北川断裂和彭县－灌县断裂发生了同震位移,同时在该地区新出现了一条北西向的同震破裂带——小鱼洞断裂的破裂带,并分割了两条近于平行的北东向逆冲－走滑型的主断裂。汶川特大地震发生后重点对小鱼洞断裂的地表破裂开展了详细的野外地质填图,利用全站仪和GPS对地表破裂进行了精确的测量。初步调查的结果表明,小鱼洞断裂位于映秀－北川断裂与彭县－灌县断裂之间,走向近于北西向,延伸约15km,以脆性破裂为特征,穿过小鱼洞大桥,并切割了多种类型的地貌单元,使道路发生拱曲、破坏和桥梁垮塌或移位。单个破裂长度在几米到300m不等,其南西盘为上升盘,北东盘为下降盘,平均垂直位错为1.0m,平均水平位错为2.3m,垂直与水平位错量之比1 ∶1～1 ∶2,显示为逆冲分量小于或等于左旋走滑分量,并以左旋走滑作用为主。同时,研究表明小鱼洞断裂属于映秀－北川断裂与彭县－灌县断裂之间的捩断层,其主要特征包括： 1)是在汶川地震中由于龙门山逆冲体之间的差异逆冲运动过程中而形成的断裂; 2)其走向近于北西向,垂直于龙门山北东向的主干断裂,而平行于逆冲体的逆冲运动方向; 3)具有高角度断面的断层,以左旋走滑作用为主。  相似文献   

16.
5月16-24日对川西汶川大地震震中区的发震断裂地带进行的实地考察和初步测量,获得了宝贵的地表变形和同震位移最数据资料,证实汶川地震属于逆冲断裂型地震,主破裂沿映秀-北川断裂带发育,前山地区滑灌县-安县断裂也有地表破裂,同震位移量在3～5m.汶川地震产牛的地表破裂构造和运动性质显示明显分段特性,映秀-北川段以挤压逆冲为主,而北川以北段则伴有显著的右旋走滑分量.  相似文献   

17.
The 12 May 2008 Ms 8.0 Wenchuan earthquake, China, was one of largest continental thrusting events worldwide. Based on interpretations of post-earthquake high-resolution remote sensing images and field surveys, we investigated the geometry, geomorphology, and kinematics of co-seismic surface ruptures, as well as seismic and geologic hazards along the Longmen Shan fold-and-thrust belt. Our results indicate that the Wenchuan earthquake occurred along the NE–SW-trending Yingxiu–Beichuan and Guanxian–Anxian faults in the Longmen Shan fold-and-thrust belt. The main surface rupture zones along the Yingxiu–Beichuan and Guanxian–Anxian fault zones are approximately 235 and 72 km in length, respectively. These sub-parallel ruptures may merge at depth. The Yingxiu–Donghekou surface rupture zone can be divided into four segments separated by discontinuities that appear as step-overs or bends in map view. Surface deformation is characterized by oblique reverse faulting with a maximum vertical displacement of approximately 10 m in areas around Beichuan County. Earthquake-related disasters (e.g., landslides) are linearly distributed along the surface rupture zones and associated river valleys.The Wenchuan earthquake provides new insights into the nature of mountain building within the Longmen Shan, eastern Tibetan Plateau. The total crustal shortening accommodated by this great earthquake was as much as 8.5 m, with a maximum vertical uplift of approximately 10 m. The present results suggest that ongoing mountain building of the Longmen Shan is driven mainly by crustal shortening and uplift related to repeated large seismic events such as the 2008 Wenchuan earthquake. Furthermore, rapid erosion within the Longmen Shan fold-and-thrust belt occurs along deep valleys and rupture zones following the occurrence of large-scale landslides triggered by earthquakes. Consequently, we suggest that crustal shortening related to repeated great seismic events, together with isostatic rebound induced by rapid erosion-related unloading, is a key component of the geodynamics that drive ongoing mountain building on the eastern Tibetan Plateau.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号