首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The Wadi Bidah Mineral District of Saudi Arabia contains more than 16 small outcropping stratabound volcanogenic Cu–Zn–(Pb) ± Au-bearing massive sulphide deposits and associated zones of hydrothermal alteration. Here, we use major and trace element analyses of massive sulphides, gossans, and hydrothermally altered and least altered metamorphosed host rock (schist) from two of the deposits (Shaib al Tair and Rabathan) to interpret the geochemical and petrological evolution of the host rocks and gossanization of the mineralization. Tectonic interpretations utilize high-field-strength elements, including the rare earth elements (REE), because they are relatively immobile during hydrothermal alteration, low-grade metamorphism, and supergene weathering and therefore are useful in constraining the source, composition, and physicochemical parameters of the primary igneous rocks, the mineralizing hydrothermal fluid and subsequent supergene weathering processes. Positive Eu anomalies in some of the massive sulphide samples are consistent with a high temperature (>250°C) hydrothermal origin, consistent with the Cu contents (up to 2 wt.%) of the massive sulphides. The REE profiles of the gossans are topologically similar to nearby hydrothermally altered felsic schists (light REE (LREE)-enriched to concave-up REE profiles, with or without positive Eu anomalies) suggesting that the REE experienced little fractionation during metamorphism or supergene weathering. Hydrothermally altered rocks (now schists) close to the massive sulphide deposits have high base metals and Ba contents and have concave-up REE patterns, in contrast to the least altered host rocks, consistent with greater mobility of the middle REE compared to the light and heavy REE during hydrothermal alteration. The gossans are interpreted to represent relict massive sulphides that have undergone supergene weathering; ‘chert’ beds within these massive sulphide deposits may be leached wall-rock gossans that experienced silicification and Pb–Ba–Fe enrichment from acidic groundwaters generated during gossan formation.  相似文献   

2.
现代海底热液成矿作用研究现状及发展方向   总被引：15，自引：0，他引：15  
侯增谦  莫宣学 《地学前缘》1996,3(4):263-273
现代海底热水成矿作用研究的重大进展表现在两个方面：（１）大批活动的和窒息的热液活动区和硫化物矿床在洋脊、岛弧、弧后盆地及板内火山活动中心等海底环境相继发现。在沉积物饥饿洋脊，矿床规模较小，Ｃｕ－Ｚｎ为主，沉积物覆盖洋脊，矿床规模巨大，Ｐｂ－Ｚｎ为主。弧后扩张或弧间裂陷盆地，形成Ｐｂ－Ｚｎ→Ｚｎ－Ｐｂ－Ｃｕ→Ｃｕ－Ｚｎ矿床谱系。岛弧环境硫化物矿床不具规模，板内火山活动中心以氧化物－硫化物矿化为特色。（２）现代海底热水成矿作用观察和研究为古代ＶＭＳ矿床成因研究提供了重要信息，对现有成矿理论产生重要影响。现代成矿观念强调：①海底成矿作用虽可产生于不同环境，但均与张裂断陷事件密切相关。矿床规模和分布特点受张裂速率制约；②成矿物质主体来源于热水循环的火山－沉积岩和下伏基底物质；③硫化物堆积发生于丘堤－烟囱联合构成的机构和结壳下部，通过开放空间的硫化物充填和先成矿石淋滤迁移来实现。④热液流体呈双扩散对流循环。现代海底热水成矿作用的未来研究方向可概括为强度方向和广度方向。广度研究将加大力度去发现新的矿床，强度研究将采用地球物理方法并配以必要的钻探，深入揭示矿床的三维结构和热液体系及成矿机制。  相似文献   

3.
The Spanish-Portuguese Pyrite Belt covers a large area in the SW part of the Iberian Peninsula from Seville to the westcoast of Portugal. Total reserves of aprox. 1.000 million tons of massive sulphide ores have an average content of 46% S, 42% Fe, and 2–4% Cu+Pb+Zn. The stratiform sulphide deposits and accompanying manganese mineralizations are of synsedimentary-exhalative origin. They occur in a Lower Carboniferous, geosynclinal, volcanic-sedimentary rock sequence, strongly folded during the Hercynian Orogeny. A brief outline of the regional geology of this ore province is given, and the geology of three mining districts is described: Lousal (Portugal), La Zarza and Tharsis (Huelva Province, Spain). A close relationship between sulphide and manganese ores with the submarine, acid alkaline volcanism is emphasized. Solfataric activity is responsible for the formation of sulphides in the final stages of volcanic extrusions. The ore concentration in big deposits (ore-lenses with up to 100 million tons of massive sulphides) has been due to inflows of sulphide muds and/or detrital sulphides into newly formed depressions of a contineously changing seafloor topography due to volcano tectonic movements.  相似文献   

4.
Sulphide inclusions, which represent melts trapped in the minerals of magmatic rocks and xenoliths, provide important clues to the behaviour of immiscible sulphide liquids during the evolution of magmas and the formation of NieCueFe deposits. We describe sulphide inclusions from unique ultramafic clots within mafic xenoliths, from the mafic xenoliths themselves, and from the three silica-rich host plutons in Tongling, China. For the first time, we are able to propose a general framework model for the evolution of sulphide melts during the evolution of mafic to felsic magmas from the upper mantle to the upper crust. The model improves our understanding of the sulphide melt evolution in upper mantle to upper crust magmas, and provides insight into the formation of stratabound skarn-type FeeCu polymetallic deposits associated with felsic magmatism, thus promising to play an important role during prospecting for such deposits.  相似文献   

5.
Tertiary continental flood basalts on Qeqertarssuaq and Nuussuaq in West Greenland contain ～3?km of picrites and variably contaminated tholeiites. The picrites are in the Naujánguit member of the Vaïgat Formation and they have 7–29?wt% MgO, La/Sm?=?0.9–2.1, and 143Nd/144Nd?=?0.51263–0.51307. They appear to have crystallised from high-Mg parental magmas (14.4–16.4?wt% MgO) with isotope and trace element ratios similar to recent Icelandic picrites. Discrete horizons of tholeiites, including the Asûk and?Kûgánguaq, have elevated SiO2 (50–58 wt%), La/Sm?=?3–7, 87Sr/86Sr?=?0.70550–0.71224, and low 143Nd/144Nd?=?0.51234–0.51174. These lavas have low Cu and Ni abundances (typically 10–50?ppm Ni or Cu), and in the case of the Asûk on Qeqertarssuaq, they contain droplets of native iron. The low Cu and Ni contents are attributed to scavenging by magmatic sulphides formed in response to crustal contamination of picritic magmas. Two contamination trends are recognised, one to a sediment end-member with high Th/Nb and Archaean model Nd ages, and the other to a meta-igneous component with high La/Sm, low Th/Nb and Rb/Nb, and Proterozoic source ages. Overall, 206Pb/204Pb varies from 16.47–21.68. Both contamination trends are associated with low Cu and Ni, and high SiO2, and it is argued that the magmatic sulphides were triggered by the increases in silica, rather than simply by the introduction of additional crustal-derived sulphur. Geochemically, the Asûk and Kûgánguaq rocks resemble the most contaminated Nadezhdinsky lavas of the Siberian Trap, which are widely regarded as the source of the Ni and Cu mineralisation in the giant Noril'sk deposits. Mass balance considerations indicate that the parental liquids to the contaminated magmas contained sufficient Ni, Cu, S and platinum group elements to form substantial magmatic sulphide deposits. However, unlike the lavas at Noril'sk, the contaminated (low Cu and Ni) West Greenland basalts are in isolated units with no evidence for a gradual recovery in Ni and Cu abundances with height in the lava column. Comparison with Noril'sk suggests that although significant quantities of metals were scavenged by sulphides in West Greenland, the metal contents of the sulphides may not have been upgraded by continued interaction with subsequent magma batches.  相似文献   

6.
The late Pleistocene Lake Basalt of Medicine Lake volcano, California is comprised of variably porphyritic basalt and basaltic andesite flows and scoria. These eruptives are similar in composition and phenocryst abundance to the low-MgO, high-Al2O3 mafic magmas common in convergent margin settings. The petrogenesis of the magmas that produced the Lake Basalt has been inferred from field relations, melting experiments and subsequent major and trace element modeling. Their formation involved both hydrous differentiation and plagioclase accumulation and thus the Lake Basalt can be used to constrain the relative contributions of these processes to the production of high-Al2O3 arc basalt. Phenocryst-poor lavas of the Lake Basalt formed by hydrous differentiation; their compositions and observed phenocrysts were reproduced in 1 kbar, H2O-saturated melting experiments. Anorthite-rich plagioclase compositions of the lavas of the Lake Basalt necessitate crystallization from melts with between 4 and 6 wt% dissolved H2O. Phenocryst-rich lavas of the Lake Basalt, with 18 modal% phenocrysts and greater, formed by plagioclase accumulation in magmas similar to the phenocryst-poor lavas. This interpretation is supported by the depleted incompatible element abundances and enriched Sr/Zr ratio of the more porphyritic lavas relative to the phenocryst-poor lavas. We model the formation of the Lake Basalt as a two-stage process that combines a differentiation model and a plagioclase accumulation model. Stage one involved hydrous fractionation, granitic assimilation and mixing with undifferentiated parent magma. This process generated lavas with up to 19.2 wt% A12O3 and 7 modal% phenocrysts. In stage two, plagioclase accumulated in these liquids and produced more aluminous and porphyritic lavas with up to 21.8 wt% A12O3 and 33 modal% phenocrysts.  相似文献   

7.
P.R. Castillo  S.J. Rigby  R.U. Solidum   《Lithos》2007,97(3-4):271-288
Lavas from the Sulu Arc, southern Philippines, exhibit an enrichment in high field strength elements (HFSE) that represents a departure from the typical volcanic arc geochemical signature. It has been postulated that this relative enrichment arises from metasomatism of mantle wedge peridotites by melts derived from the subducting oceanic lithosphere, through formation of amphibole which subsequently breaks down and enriches the mantle source of parental arc magmas in HFSE. Divergent chemical and isotopic characteristics between Sulu Arc HFSE-enriched lavas and the Sulu Sea crust being subducted—the presumed source of slab-derived melts—render it unlikely, however, that HFSE enrichment arises from the influence of such melts. New geochemical data suggest that the varying degrees of HFSE enrichment in Sulu Arc lavas are instead the result of variable amounts of mixing between enriched and depleted mantle end-components—the sources of South China Sea intraplate lavas and Sulu seafloor basalts, respectively—within a compositionally heterogeneous mantle wedge.  相似文献   

8.
Most magmatic Ni–Cu–PGE sulphide deposits occur within long-lived magma pathways fed by high degree partial melts of the mantle. Holistic mineral-system analysis for such deposits has some parallels with dominantly hydrothermal systems, but also some important differences.Major provinces are associated with large volumes of magma erupted at margins of ancient Archaean cratons, and are associated with small intrusions through which large volumes of magmas have passed. There is no demonstrable association with any particular magma type, although in most provinces the ores are found associated with the most primitive available magmas, whatever these may be. Ore-bearing intrusions tend to form early in the evolution of the host province, although exceptions exist to this rule, and these intrusions typically account for very small proportions of the volumes of the province as a whole.Ore deposition is favoured by prolonged high-volume flow over a horizontal floor. This floor may take the form of the base of a channelized sill, tube or blade-shaped dyke, which account for most of the known host igneous bodies to significant ore deposits. Deposition mechanisms may be chemical or physical, but large high-grade deposits require a major component of transported sulphide liquid, initially carried as droplets. Late stage migration of sulphide liquid as gravity currents within intrusion networks, coupled with infiltration and melting of floor rocks, accounts for the common observation in mafic intrusion hosted deposits of cross cutting relationships between massive sulphides, host intrusions and country rocks.The following set of criteria is proposed in targeting and evaluating Ni–Cu–PGE sulphide systems: 1) nature of magmatism and relationship to pre-existing cratonic architecture; 2) magmatic and structural controls on the development of protracted-flow magma conduits; 3) access to crustal S sources at some point along the pathway; 4) favourable intrusion geometry and emplacement style for deposition, reworking and upgrading of sulphide magmas, and 5) favourable structural history and erosional level for preservation and detectability.These components can be translated into mappable geological criteria. At the predictive targeting scale, the key features are proximity to ancient cratonic boundaries and long-lived, trans-crustal structures, and relationship to voluminous mafic or ultramafic magmatism typically with high Mg and low Ti contents, but otherwise lacking distinctive characteristics. At the detection scale, there are two distinct approaches: recognition of high volume magma pathways with prolonged flow-through operating at length scales of km based on morphological, petrological, geophysical and structural observations; and identification of the petrographic and geochemical signals of accumulation or extraction of sulphide liquid.  相似文献   

9.
In this contribution an overview of oceanic lithosphere, associated ore deposits (sulphides, Fe and Mn oxides, chromitites) and their final destination in ophiolitic rocks are presented. This is followed by a discussion on massive sulphide mineralisation formed at mid-ocean ridges (MOR) and/or supra-subduction zones (SSZ). The geological characteristics and the genesis of the Cu-rich massive sulphide deposits of Cyprus and of the Oman ophiolite are discussed based on an extensive review of the published literature. This is followed by a synopsis of the ophiolitic terranes and associated mineral system in the Urals. We also present an overview of the ophiolitic belts and sutures of the Tethyan orogens, focussing on the podiform chromite deposits that they typically host, with a special focus on the ophiolitic chromitites of Turkey. A final section deals with possible ophiolites of Proterozoic and Archaean ages and, where applicable, associated chromitites. In the concluding remarks a brief note is made of some specific ancient seafloor hydrothermal constructs that have been interpreted as black chimneys in volcanogenic massive sulphide (VMS) deposits now hosted in ophiolitic sequences.  相似文献   

10.
SW Iberia is interpreted as an accretionary magmatic belt resulting from the collision between the South Portuguese Zone and the autochthonous Iberian terrane in Variscan times (350 to 330 Ma). In the South Portuguese Zone, pull-apart basins were filled with a thick sequence of siliciclastic sediments and bimodal volcanic rocks that host the giant massive sulphides of the Iberian Pyrite Belt. Massive sulphides precipitated in highly efficient geochemical traps where metal-rich but sulphur-depleted fluids of dominant basinal derivation mixed with sulphide-rich modified seawater. Massive sulphides formed either in porous/reactive volcanic rocks by sub-seafloor replacement, or in dark shale by replacement of mud or by exhalation within confined basins with high biogenic activity. Crustal thinning and magma intrusion were responsible for thermal maturation and dehydration of sedimentary rocks, while magmatic fluids probably had a minor influence on the observed geochemical signatures.The Ossa Morena Zone was a coeval calc-alkaline magmatic arc. It was the site for unusual mineralization, particularly magmatic Ni–(Cu) and hydrothermal Fe-oxide–Cu–Au ores (IOCG). Most magmatism and mineralization took place at local extensional zones along first-order strike-slip faults and thrusts. The source of magmas and IOCG and Ni–(Cu) deposits probably lay in a large mafic–ultramafic layered complex intruded along a detachment at the boundary between the upper and lower crust. Here, juvenile melts extensively interacted with low-grade metamorphic rocks, inducing widespread anatexis, magma contamination and further exsolution of hydrothermal fluids. Hypersaline fluids (δ18Ofluid > 5.4‰ to 12‰) were focused upward into thrusts and faults, leading to early magnetite mineralization associated with a high-temperature (> 500 °C) albite–actinolite–salite alteration and subsequent copper–gold-bearing vein mineralization at somewhat lower temperatures. Assimilation of sediments by magmas led in turn to the formation of immiscible sulphide and silicate melts that accumulated in the footwall of the layered igneous complex. Further injection of both basic and sulphide-rich magmas into the upper crust led to the formation of Ni–(Cu)-rich breccia pipes.Younger (330 to 280 Ma?) peraluminous granitoids probably reflect the slow ascent of relatively dry and viscous magmas formed by contact anatexis. These granitoids have W–(Sn)- and Pb–Zn-related mineralization that also shows geochemical evidence of major mantle–crust interaction. Late epithermal Hg–(Cu–Sb) and Pb–Zn–(Ag) mineralization was driven by convective hydrothermal cells resulting from the high geothermal gradients that were set up in the zone by intrusion of the layered igneous complex. In all cases, most of the sulphur seems to have been derived from leaching of the host sedimentary rocks (δ34S = 7‰ to 20‰) with only limited mixing with sulphur of magmatic derivation.The metallogenic characteristics of the two terranes are quite different. In the Ossa Morena Zone, juvenile magmatism played a major role as the source of metals, and controlled the styles of mineralization. In the South Portuguese Zone, magmas only acted as heat sources but seem to have had no major influence as sources of metals and fluids, which are dominated by crustal signatures. Most of the magmatic and tectonic features related to the Variscan subduction and collision seem to be masked by those resulting from transpressional deformation and deep mafic intrusion, which led to the development of a metallogenic belt with little resemblance to other accretionary magmatic arcs.  相似文献   

11.
The sulphide ores of the Baimazhai deposit, although typically orthomagmatic, locally exhibit peculiar textural features and are intimately associated with hydrothermal minerals, such as biotite, amphibole and chlorite. This association suggests that the magmatic sulphide ores were subjected to hydrothermal alteration and subsequent redistribution, resulting in the observed textural features. Geochemically, the Baimazhai sulphide ores are enriched in Cu, Pd and Au, which,according to previous studies, reflects the action of hydrothermal fluids. Interestingly, Ar-Ar dating yielded the plateau ages of about 160–170 Ma, which are at odds with the established Permian age of the Emeishan large igneous province. We interpreted these younger ages as due to thermal resetting during post-Permian tectonothermal events. We have proposed a model in which tectonic movements and hydrothermal fluids related to these events modified the pre-existing magmatic sulphides. Given the degree of overprint, we suggested two possible scenarios: 1) the sulphide disseminations that surround the massive magmatic ores are the result of deformation and hydrothermal alteration; and 2) there were both magmatic massive and disseminated sulphides, in which case the scale and relocation of remobilization would have been smaller, but still detectable.  相似文献   

12.
The Filón Norte orebody (Tharsis, Iberian Pyrite Belt) is one of the largest pyrite-rich massive sulphide deposits of the world. The present structure of the mineralization consists of an internally complex low-angle north-dipping thrust system of Variscan age. There are three major tectonic units separated by thick fault zones, each unit with its own lithologic and hydrothermal features. They are internally organized in a hinterland dipping duplex sequence with high-angle horses of competent rocks (igneous and detritic rocks and massive sulphides) bounded by phyllonites. The mineralization is within the Lower Unit and is composed of several stacked sheets of massive sulphides and shales hosting a stockwork zone with no obvious zonation. The Intermediate Unit is made up of pervasively ankeritized shales and basalts (spilites). Here, hydrothermal breccias are abundant. The Upper Unit is the less hydrothermally altered one and consists of silicified dacites and a diabase sill. The tectonic reconstruction suggests that the sequence is inverted and the altered igneous rocks were originally below the orebody. Carbon, oxygen and sulphur isotopes in the massive sulphides and hydrothermal rocks as well as the mineral assemblage and the paragenetic succession suggest that the sulphide precipitation in the sea floor took place at a low temperature (<≈150?°C) without indication, at least in the exposed section, of a high-temperature copper-rich event. Sporadic deep subsea-floor boiling is probably responsible for the formation of hydrothermal breccias and the wide extension of the stockwork. Its Co-Au enrichment is interpreted as being related with the superposition of some critical factors, such as the relationship with black shales, the low temperature of formation and the boiling of hydrothermal fluids. The present configuration and thickness of the orebody is due to the tectonic stacking of a thin and extensive blanket (2–4?km2) of massive sulphides with low aspect ratio. They were formed by poorly focused venting of hot modified seawater equilibrated with underlying rocks into the seafloor. Massive sulphide precipitation took place by hydrothermal fluid quenching, bacteriogenic activity and particle settling in an unusual, restricted, euxinic and shallow basin (brine pool?) with a low detritic input but with important hydrothermal activity related to synsedimentary extensional faulting. Resedimentation of sulphides seems to be of major importance and responsible for the observed well-mixed proximal and distal facies. The tectonic deformation is largely heterogeneous and has been mostly channelled along the phyllonitic (tectonized shales) deformation bands. Thus, sedimentary and diagenetic textures are relatively well-preserved outside the deformation bands. In the massive sulphides, superimposed Variscan recrystallization is not very important and only some early textures are replaced by metamorphic/tectonic ones. The stockwork is much more deformed than the massive sulphides. The deformation has a critical effect on the present morphology of the orebody and the distribution of the ore minerals. This deposit is a typical example of the sheet-like, shale-hosted, anoxic, low temperature and Zn-rich massive sulphides developed in a ensialic extensional basin.  相似文献   

13.
The Lewis Ponds Zn–Pb–Cu–Ag–Au deposit, located in the eastern Lachlan Fold Belt, central western New South Wales, exhibits the characteristics of both volcanic-hosted massive sulphide and carbonate-hosted replacement deposits. Two stratabound massive to disseminated sulphide zones, Main and Toms, occur in a tightly folded Upper Silurian sequence of marine felsic volcanic and sedimentary rocks. They have a combined indicated resource of 5.7 Mt grading 3.5% Zn, 2.0% Pb, 0.19% Cu, 97 g/t Ag and 1.9 g/t Au. Main Zone is hosted by a thick unit of poorly sorted mixed provenance breccia, limestone-clast breccia and quartz crystal-rich sandstone, whereas Toms Zone occurs in the overlying siltstone. Pretectonic carbonate–chalcopyrite–pyrite and quartz–pyrite stringer veins occur in the footwall porphyritic dacite, south of Toms Zone. Strongly sheared dolomite–chalcopyrite–pyrrhotite veins directly underlie the Toms massive sulphide lens. The mineralized zones consist predominantly of pyrite, sphalerite and galena. Paragenetically early framboidal, dendritic and botryoidal pyrite aggregates and tabular pyrrhotite pseudomorphs of sulphate occur throughout the breccia and sandstone beds that host Main Zone, but are rarely preserved in the annealed massive sulphide in Toms Zone. Main and Toms zones are associated with a semi-conformable hydrothermal alteration envelope, characterized by texturally destructive chlorite-, dolomite- and quartz-rich assemblages. Dolomite, chlorite, quartz, calcite and sulphides have selectively replaced breccia and sandstone beds in the Main Zone host sequence, whereas the underlying porphyritic dacite is weakly sericite altered. Vuggy and botryoidal textures resulted from partial dissolution of the dolomite-altered sedimentary rocks and unimpeded growth of base metal sulphides, carbonate and quartz into open cavities. The intense chlorite-rich alteration assemblage, underlying Toms Zone, grades outward into a weak pervasive sericite–quartz assemblage with distance from the massive sulphide lens. Limestone clasts and hydrothermal dolomite at Lewis Ponds are enriched in light carbon and oxygen isotopes. The dolomite yielded 13CVPDB values of –11 to +1 and 18OVSMOW values of 6 to 16. Liquid–vapour fluid inclusions in the dolomite have low salinities (1.4–7.7 equiv. wt% NaCl) and homogenization temperatures (166–232°C for 1,000 m water depth). Dolomitization probably involved fluid mixing or fluid–rock interactions between evolved heated seawater and the limestone-bearing facies, prior to and during mineralization. 34SVCDT values range from 2.0 to 5.0 in the massive sulphide and 3.9 to 7.4 in the footwall carbonate–chalcopyrite–pyrite stringer veins, indicating that the hydrothermal fluid may have contained mamgatic sulphur and a component of partially reduced seawater. The sulphide mineral assemblages at Lewis Ponds are consistent with moderate to strongly reduced conditions during diagenesis and mineralization. Low temperature dolomitization of limestone-bearing facies in the Main Zone host sequence created secondary porosity and provided a reactive host for fluid-rock interactions. Main Zone formed by lateral fluid flow and sub-seafloor replacement of the poorly sorted breccia and sandstone beds. Base metal sulphide deposition probably resulted from dissolution of dolomite, fluid mixing and increased fluid pH. Pyrite, sphalerite and galena precipitated from a relatively low temperature, 150–250°C hydrothermal fluid. In contrast, Toms Zone was emplaced into fine-grained sediment at or near the seafloor, above a zone of focused up-flowing hydrothermal fluids. Copper-rich assemblages were deposited in the Toms Zone footwall and massive sulphide lenses in Main and Toms zones as the hydrothermal system intensified. During the D1 deformation, fracture-controlled fluids within the Lewis Ponds fault zone and adjacent footwall volcanic succession remobilized sulphides into syntectonic quartz veins. Lewis Ponds is a rare example of a synvolcanic sub-seafloor hydrothermal system developed within fossiliferous limestone-bearing facies. The close spatial association between limestone, hydrothermal dolomite, massive sulphide and dacite provides a basis for new exploration targets elsewhere in New South Wales.Editorial handling: D. Lentz  相似文献   

14.
《Ore Geology Reviews》2006,28(1-4):203-237
VMS deposits of the South Urals developed within the evolving Urals palaeo-ocean between Silurian and Late Devonian times. Arc-continent collision between Baltica and the Magnitogorsk Zone (arc) in the south-western Urals effectively terminated submarine volcanism in the Magnitogorsk Zone with which the bulk of the VMS deposits are associated. The majority of the Urals VMS deposits formed within volcanic-dominated sequences in deep seawater settings. Preservation of macro and micro vent fauna in the sulphide bodies is both testament to the seafloor setting for much of the sulphides but also the exceptional degree of preservation and lack of metamorphic overprint of the deposits and host rocks. The deposits in the Urals have previously been classified in terms of tectonic setting, host rock associations and metal ratios in line with recent tectono-stratigraphic classifications. In addition to these broad classes, it is clear that in a number of the Urals settings, an evolution of the host volcanic stratigraphy is accompanied by an associated change in the metal ratios of the VMS deposits, a situation previously discussed, for example, in the Noranda district of Canada.Two key structural settings are implicated in the South Urals. The first is seen in a preserved marginal allochthon west of the Main Urals Fault where early arc tholeiites host Cu–Zn mineralization in deposits including Yaman Kasy, which is host to the oldest macro vent fauna assembly known to science. The second tectonic setting for the South Urals VMS is the Magnitogorsk arc where study has highlighted the presence of a preserved early forearc assemblage, arc tholeiite to calc-alkaline sequences and rifted arc bimodal tholeiite sequences. The boninitc rocks of the forearc host Cu–(Zn) and Cu–Co VMS deposits, the latter hosted in fragments within the Main Urals Fault Zone (MUFZ) which marks the line of arc-continent collision in Late Devonian times. The arc tholeiites host Cu–Zn deposits with an evolution to more calc-alkaline felsic volcanic sequences matched with a change to Zn–Pb–Cu polymetallic deposits, often gold-rich. Large rifts in the arc sequence are filled by thick bimodal tholeiite sequences, themselves often showing an evolution to a more calc-alkaline nature. These thick bimodal sequences are host to the largest of the Cu–Zn VMS deposits.The exceptional degree of preservation in the Urals has permitted the identification of early seafloor clastic and hydrolytic modification (here termed halmyrolysis sensu lato) to the sulphide assemblages prior to diagenesis and this results in large-scale modification to the primary VMS body, resulting in distinctive morphological and mineralogical sub-types of sulphide body superimposed upon the tectonic association classification.It is proposed that a better classification of seafloor VMS systems is thus achievable using a three stage classification based on (a) tectonic (hence bulk volcanic chemistry) association, (b) local volcanic chemical evolution within a single edifice and (c) seafloor reworking and halmyrolysis.  相似文献   

15.
The Basil Cu–Co deposit, Harts Range, central Australia, is hosted by the Riddock Amphibolite, a sequence that has been metamorphosed at upper-amphibolite- to granulite-facies conditions at 480–460 Ma (Larapinta Event), and subsequently reworked at amphibolite-facies conditions (450–300 Ma). As a result, many of the primary mineralization textures and other features that could characterise ore genesis have been obliterated. However, preserved textures and mineral relationships in the mineralized zone, allow some constraints to be placed on the genetic history of the deposit using mineralogical, petrographic and geochemical studies of host rocks and sulphides.Results of this study permit at least two genetic models to be ruled out. Firstly, whole rock geochemistry and garnet compositions suggest that the deposit is not a skarn system. Secondly, the lack of any significant Ni-signature, and the presence of abundant zircons in the host amphibolite (indicating that not all host rocks are mafic in composition and/or magmatic in character), make an orthomagmatic Ni–Cu–(PGE) system unlikely. Alternatively, Basil is assigned to a volcanic-hosted massive sulphide (VHMS)-style of mineralization, formed on the seafloor, within basaltic and sedimentary host rocks, typical of deposits occurring in such settings. The lack of a recognisable hydrothermal alteration zone is consistent with either destruction of the alteration zone during metamorphism or detachment of the ore from alteration during later deformation.The occurrence of sulphide inclusions within garnet and amphibole indicates that the sulphides must be syn-metamorphic or earlier. Partitioning of trace elements between pyrite and co-existing pyrrhotite suggests that (re)crystallization occurred under equilibrium conditions. The composition of sphalerite coexisting with pyrite and pyrrhotite indicates crystallization at pressures of at least 10 kbar, consistent with peak metamorphism during the Early Ordovician Larapinta Event. Zr-in-titanite geothermometry indicates peak temperatures of 730–745 °C.  相似文献   

16.
Massive and stockwork Fe-Cu-Zn (Cyprus type) sulphide deposits in the upper parts of ophiolite complexes represent hydrothermal mineralization at ancient accretionary plate boundaries. These deposits are probable metallogenic analogues of the polymetallic sulphide deposits recently discovered along modern oceanic spreading centres. Genetic models for these deposits suggest that mineralization results from large-scale circulation of sea-water through basaltic basement along the tectonically active axis of spreading, a zone of high heat flow. The high geothermal gradient above 1 to 2 km deep magma chambers emplaced below the ridge axis drives the convective circulation cell. Cold oxidizing sea-water penetrating the crust on the ridge flanks becomes heated and evolves into a highly reduced somewhat acidic hydrothermal solvent during interaction with basaltic wall-rock. Depending on the temperature and water/rock ratio, this fluid is capable of leaching and transporting iron, manganese, and base metals; dissolved sea-water sulphate is reduced to sulphide. At the ridge axis, the buoyant hydrothermal fluid rises through permeable wall-rocks, and fluid flow may be focussed along deep-seated fractures related to extensional tectonic processes. Metal sulphides are precipitated along channelways as the ascending fluid undergoes adiabatic expansion and then further cooling during mixing with ambient sub-sea-floor water. Vigorous fluid flow results in venting of reduced fluid at the sea-floor/sea-water interface and deposition of massive sulphide. A comparison of sulphide mineralization and wall-rock alteration in ancient and modern spreading centre environments supports this genetic concept.Massive sulphide deposits in ophiolites generally occur in clusters of closely spaced (< 1–5 km) deposits. Individual deposits are a composite of syngenetic massive sulphide and underlying epigenetic stockwork-vein mineralization. The massive sulphide occurs as concordant tabular, lenticular, or saucer-shaped bodies in pillow lavas and pillow-lava breccia; massive lava flows, hyalcoclastite, tuff, and bedded radolarian chert are less commonly associated rock types. These massive sulphide zones are as much as 700 m long, 200 m wide, and 50 m thick. The pipe-, funnel-, or keel-shaped stockwork zone may extend to a dehpth of 1 km in the sheeted-dike complex. Several deposits in Cyprus are confined to grabens or the hanging wall of premineralization normal faults.Polymetallic massive sulphide deposits and active hydrothermal vents at medium- to fast-rate spreading centres (the East Pacific Rise at lat. 21°N, the Galapagos Spreading Centre at long. 86°W, the Juan de Fuca Ridge at lat. 45°N., and the Southern Trough of Guaymas Basin, Gulf of California) have interdeposit spacings on a scale of tens or hundreds of metres, and are spatially associated with structural ridges or grabens within the narrow (< 5 km) axial valleys of the rift zones. Although the most common substrate for massive sulphide accumulations is stacked sequences of pillow basalt and sheet flows, the sea-floor underlying numerous deposits in Guaymas Basin consists of diatomaceous ooze and terrigenous clastic sediment that is intruded by diabase sills. Mound-like massive sulphide deposits, as much as 30 m wide and 5m high, occur over actively discharging vents on the East Pacific Rise, and many of these deposits serve as the base for narrow chimneys and spires of equal or greater height. Sulphides on the Juan de Fuca Ridge appear to form more widespread blanket deposits in the shallow axial-valley depression. The largest deposit found to date, along the axial ridge of the Galapagos Spreading Centre, has a tabular form and a length of 1000 m, a width of 200 m, and a height of 30 m.The sulphide assemblage in both massive and vein mineralization in Cyprus type deposits is characteristically simple: abundant pyrite or, less commonly, pyrrhotite accompanied by minor marcasite, chalcopyrite, and sphalerite. With few exceptions, the composition of massive sulphide ranges from 0.3 to 5 wt. % Cu, from 0.1 to 3 wt. % Zn, from 0.5 to 30 ppm Au, and from 1 to 50 ppm Ag. The only common gangue minerals — quartz, chlorite, calcite, and gypsum generally make up less than 10 percent of the massive zone.Sulphide assemblages in massive sulphide samples recovered from the Juan de Fuca Ridge (abundant sphalerite, wurtzite, and pyrite; minor marcasite, chalcopyrite, and galena), East Pacific Rise (abundant sphalerite, pyrite, and chalcopyrite; minor wurtzite, marcasite, and pyrrhotite), and Guaymas Basin (abundant pyrrhotite and sphalerite; minor chalcopyrite) contrast with ophiolitic deposits. Bulk analyses of two zinc-rich sulphide samples from the Juan de Fuca Ridge yield the following average values: Zn, 56.6 wt. %; Cu, 0.2 wt. %; Pb, 0.15 wt. %; Fe, 4.9 wt. %; Ag, 260 ppm; and Cd, 775 ppm. Other minerals precipitated with sulphides at hydrothermal-vent sites include anhydrite, barite, gypsum, Mg-hydroxysulphate-hydrate, talc, sulphur, and amorphous silica.Massive sulphide lenses in some Cyprus-type deposits are underlain by a silica-rich zone consisting of massive quartz, opaline silica, red jasper, or chert mixed with disseminated and veinlet Fe-Cu-Zn sulphides. Some deposits are overlain by ochre, a gossanous Mn-poor Fe-rich bedded deposit composed of goethite, maghemite, quartz, and finely disseminated sulphide. In the Solomon Islands, ochre is overlain by siliceous sinter containing anhydrite, barite, and sulphide; the sinter contains anomalous Ag, Au, Cu, Zn, and Hg, and grades upward into Fe-rich chert and manganiferous wad. Amorphous Fe-Mn deposits (umber) and Mn-bearing chert enriched in Ba, Co, Cu, Ni, Cr, Pb, and Zn are common features near the top of ophiolite sequences. Although their genetic relation to sulphide mineralization is uncertian, they probably formed during off-axis hydrothermal discharge.At modern, medium-rate spreading centres, thin blankets of unconsolidated hydrothermal sediment have been observed near hydrothermal sulphide deposits. Basalt fragments recovered with massive sulphide from the Juan de Fuca Ridge have surfaces coated with smectite, magnetite, hematite, opaline silica, and Fe---Mn-oxyhydroxides. Sediment mounds composed largely of nontronitic clay and hydrated Fe and Mn oxides, and more distal metalliferous (Fe, Mn, Cu, Ni, Pb, Zn) sediment on the flanks of ceanridges, are also products of off-axis hydrothermal processes.Pillow lavas, diabase dikes, and gabbro in ophiolite sequences, and deeper, layer 2 basalt and diabase recovered from oceanic ridges, are altered to greenschist-facies assemblages (albite + chlorite + actinolite ± sphene ± quartz ± pyrite) during high-temperature sub-sea-floor hydro-thermal metamorphism near the axis of spreading. Chemical changes in the wall-rock during this large-scale sea-water/rock interactive episode depend on the water/rock ratio and temperature but generally include gains in Mg, Na and H2O and losses of Ca. Subsequent low temperature sea-water/rock interaction away from the axis of spreading results in fracture-controlled zeolitefacies alteration, characterized by smectite, caledonite, zeolite, calcite, prehnite, hematite, marcasite, and pyrite. This retrograde alteration involves increases in total Fe, K, and H2O and decreases in Mg and Si in the wallrock; Ca may be lost or gained.Wall-rock alteration in Cyprus type stockwork zones is more striking, in that the basalt and diabase between veins of Fe---Cu-Zn sulphides, quartz, and chlorite have undergone partial to complete conversion to fine-grained aggregates of quartz + chlorite + illite + pyrite; kaolinite and palygorskite may be present in minor amounts. Calcium and Na are strongly depleted; K, Al, Ti, Mn, and Ni are leached to a lesser extent; and Fe, S, Cu, Zn, and Co are strongly enriched in the wall-rock underlying massive sulphide. Mafic rocks at depth in the volcanic pile may be enriched in K, Rb, and Li, and depleted in Cu, Co, and Zn. Lavas lateral to and overlying massive sulphide mineralization may have low concentrations of Cu and high concentrations of Zn and Co relative to background levels.Mutual consideration of hydrothermal sulphide deposits and associated wall-rock alteration in ophiolites and at modern oceanic spreading centres can provide useful criteria for the development of regional exploration models for ophiolitic terrains.  相似文献   

17.
Lavas and pyroclastic products of Nisyros volcano (Aegean arc, Greece) host a wide variety of phenocryst and cumulate assemblages that offer a unique window into the earliest stages of magma differentiation. This study presents a detailed petrographic study of lavas, enclaves and cumulates spanning the entire volcanic history of Nisyros to elucidate at which levels in the crust magmas stall and differentiate. We present a new division for the volcanic products into two suites based on field occurrence and petrographic features: a low-porphyricity andesite and a high-porphyricity (rhyo)dacite (HPRD) suite. Cumulate fragments are exclusively found in the HPRD suite and are predominantly derived from upper crustal reservoirs where they crystallised under hydrous conditions from melts that underwent prior differentiation. Rarer cumulate fragments range from (amphibole-)wehrlites to plagioclase-hornblendites and these appear to be derived from the lower crust (0.5–0.8 GPa). The suppressed stability of plagioclase and early saturation of amphibole in these cumulates are indicative of high-pressure crystallisation from primitive hydrous melts (≥ 3 wt% H2O). Clinopyroxene in these cumulates has Al2O3 contents up to 9 wt% due to the absence of crystallising plagioclase, and is subsequently consumed in a peritectic reaction to form primitive, Al-rich amphibole (Mg# > 73, 12–15 wt% Al2O3). The composition of these peritectic amphiboles is distinct from trace element-enriched interstitial amphibole in shallower cumulates. Phenocryst compositions and assemblages in both suites differ markedly from the cumulates. Phenocrysts, therefore, reflect shallow crystallisation and do not record magma differentiation in the deep arc crust.  相似文献   

18.
Extrusive and intrusive igneous rocks represent different parts of a magmatic system and ultimately provide complementary information about the processes operating beneath volcanoes. To shed light on such processes, we have examined and quantified the textures and mineral compositions of plutonic and cumulate xenoliths and lavas from Bequia, Lesser Antilles arc. Both suites contain assemblages of iddingsitized olivine, plagioclase, clinopyroxene and spinel with rare orthopyroxene and ilmenite. Mineral zoning is widespread, but more protracted in lavas than xenoliths. Plagioclase cores and olivine have high anorthite (An?≤?98) and low forsterite (Fo?≤?84) compositions respectively, implying crystallisation from a hydrous mafic melt that was already fractionated. Xenolith textures range from adcumulate to orthocumulate with variable mineral crystallisation sequences. Textural criteria are used to organize the xenoliths into six groups. Amphibole, notably absent from lavas, is a common feature of xenoliths, together with minor biotite and apatite. Bulk compositions of xenoliths deviate from the liquid line of descent of lavas supporting a cumulate origin with varying degrees of reactive infiltration by evolved hydrous melts, preserved as melt inclusions in xenolith crystals. Volatile saturation pressures in melt inclusions indicate cumulate crystallization over a 162–571 MPa pressure range under conditions of high dissolved water contents (up to 7.8 wt% H2O), consistent with a variety of other thermobarometric estimates. Phase assemblages of xenoliths are consistent with published experimental data on volatile-saturated low-magnesium and high-alumina basalts and basaltic andesite from the Lesser Antilles at pressures of 200–1000 MPa, temperatures of 950–1050 °C and dissolved H2O contents of 4–7 wt%. Once extracted from mid-crustal mushes, residual melts ascend to higher levels and undergo H2O-saturated crystallization in shallow, pre-eruptive reservoirs to form phenocrysts and glomerocrysts. The absence of amphibole from lavas reflects instability at low pressures, whereas its abundance in xenoliths testifies to its importance in mid-crustal differentiation processes. A complex, vertically extensive (6 to at least 21 km depth) magmatic system is inferred beneath Bequia. Xenoliths represent fragments of the mush incorporated into ascending magmas. The widespread occurrence of evolved melts in the mush, but the absence of erupted evolved magmas, in contrast to islands in the northern Lesser Antilles, may reflect the relative immaturity of the Bequia magmatic system.  相似文献   

19.
The Aznalcóllar mining district is located on the eastern edge of the Iberian Pyrite Belt (IPB) containing complex geologic features that may help to understand the geology and metallogeny of the whole IPB. The district includes several ore deposits with total reserves of up to 130 Mt of massive sulphides. Average grades are approximately 3.6% Zn, 2% Pb, 0.4% Cu and 65?ppm Ag. Mined Cu-rich stockwork mineralizations consist of 30?Mt with an average grade of 0.6% Cu. Outcropping lithologies in the Aznalcóllar district include detrital and volcanic rocks of the three main stratigraphic units identified in the IPB: Phyllite-Quartzite Group (PQ), Volcano-Sedimentary Complex (VSC) and Culm Group. Two sequences can be distinguished within the VSC. The Southern sequence (SS) is mainly detritic and includes unusual features, such as basaltic pillow-lavas and shallow-water limestone levels, the latter located in its uppermost part. In contrast, the Aznalcóllar-Los Frailes sequence (AFS) contains abundant volcanics, related to the two main felsic volcanic episodies in the IPB. These distinct stratigraphic features each show a different palaegeographic evolution during Upper Devonian and Lower Carboniferous. Massive sulphides occur in association with black shales overlying the first felsic volcanic package (VA1) Palynomorph data obtained from this black shale horizon indicate a Strunian age for massive sulphides, and consequently an Upper Devonian age for the VA1 cycle. Field and textural relationships of volcanics suggest an evolution from a subaerial pyroclastic environment (VA1) to hydroclastic subvolcanic conditions for the VA2. This evolution can be related to compartmentalizing and increasing depth of the sedimentary basin, which may also be inferred from changes in the associated sediments, including black shales and massive sulphides. Despite changes in the character of volcanism, the same dacitic to rhyolitic composition is found in both pyroclastic and subvolcanic igneous series. The main igneous process controlling chemical variation of volcanics is fractional crystallization of plagioclase (+accessories). This process took place in shallow, sub-surface reservoirs giving rise to a compositional range of rocks that covers the total variation range of felsic rocks in the IPB. The Hercynian orogeny produced a complex structural evolution with a major, ductile deformation phase (F1), and development of folds that evolved to thrusts by short flank lamination. These thrusts caused tectonic repetition of massive and stockwork orebodies. In Aznalcóllar, some of the stockwork mineralization overthrusts massive sulphides. These structures are cut by large brittle overthrusts and by late wrench faults. The original geometric features of massive sulphide deposits correspond to large blankets with very variable thicknesses (10 to 100?m), systematically associated with stockworks. Footwall rock alteration exhibits a zonation, with an inner chloritic zone and a peripheral sericitic zone. Silicification, sulphidization and carbonatization processes also occur. Hydrothermal alteration is considered a multi-stage process, geochemically characterized by Fe, Mg and Co enrichment and intense leaching of alkalies and Ca. REE, Zr, Y and Hf are also mobilized in the inner chloritic zones. Three ore types occur, both in stockworks and massive sulphides, named pyritic, polymetallic and Cu-pyritic. Of these, Cu-pyritic is more common in stockworks, whereas polymetallic is prevalent in massive sulphides. Zoning of sulphide masses roughly sketches a typical VHMS pattern, but many alternating polymetallic and barren pyritic zones are probably related to tectonics. Although the paragenesis is complex, several successive mineral associations can be distinguished, namely: framboidal pyritic, high-temperature pyritic (300?°C), colloform pyritic, polymetallic and a late, Cu-rich high-temperature association (350?°C). Fluid inclusion data suggest that hydrothermal fluids changed continuously in temperature and salinity, both in time and space. Highest Th and salinities correspond to inner stockworks zones and later fluids. Statistic population analysis of fluid inclusion data points to three stages of hydrothermal activity, at low (<200?°C), intermediate (200–300?°C) and high temperatures (300–400?°C). 34S values in massive sulphides are lower than in stockwork mineralization suggesting a moderate bacterial activity, favoured by the euxinoid environment prevailing during black shale deposition. The intimate relation between massive sulphides and black shales points to an origin of massive sulphides by precipitation and replacement within black shale sediments. These would have acted both as physical and chemical barriers during sulphide deposition. Hydrothermal activity started during black shale deposition, triggered by a rise in thermal gradient due to the ascent of basic magmas. We suggest a three-stage genetic model: (1) low temperature, diffuse fluid flow, producing pyrite-bearing lenses and disseminations interbedded with black shales; locally, channelized high-T fluid flow occurs; (2) hydrothermal cyclic activity at a low to intermediate temperature, producing most of the pyritic and polymetallic ores, and (3) a late high-temperature phase, yielding Cu-rich and Bi-bearing mineralization, mainly in the stockwork zone.  相似文献   

20.
汇聚板块边缘岩浆中金属和氯的地球化学性质研究   总被引：2，自引：0，他引：2  
总结了铜(Cu)、金(Au)、铼(Re)和氯(Cl)在汇聚板块边缘岩浆中的性质。在岛弧型的火山岩岩浆演化的早期,Cu、Au和Re均表现为中度不相容元素,含量随SiO2含量的增加而增加。在SiO2质量分数为58%时,多数岛弧型火山岩中Au、Cu的含量会突然大幅度下降。这一变化与铁和钛的变化是耦合的,铁和钛均由不相容元素变为相容元素,显示钛磁铁矿开始结晶了。进一步的研究表明,钛磁铁矿的结晶使硫酸根被还原为氢硫酸根,后者与Au、Cu形成氢硫酸根络合物,被萃取到流体相中,从而形成成矿流体。这一过程可以很好地解释Au、Cu矿床广泛分布于汇聚板块边缘的现象。与Au、Cu相反,Re的含量在SiO2质量分数为60%时才开始下降,而且是缓慢下降。这是因为Re通常比Au、Cu更亲石。此外,Re还具有强烈的挥发性。氯在东Manus岩浆中表现为高度不相容的特点。氯的性质主要受压力、初始水含量和岩浆演化分异程度的控制。计算结果显示,由于MORB和OIB含水量低,分异演化程度低,氯在上述岩浆中表现为高度不相容的特点。相比之下,氯在岛弧岩浆中的性质就复杂得多。随着水含量和岩浆房深度的不同,氯的性质可以从相容变到高度不相容。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号