共查询到20条相似文献，搜索用时 62 毫秒
1.
三穗铀矿床位于黔中—湘西北铀成矿带内,产于震旦—寒武系老堡组炭质泥岩中,是贵州省近年勘查发现的第一个大型铀矿床。[研究目的]鉴于黔东地区铀矿成矿规律、富集机理及矿石矿物学等研究程度低,查明典型铀矿床矿石矿物组合及化学组分,探讨成矿环境,揭示成矿过程,深化成矿理论认识,将为促进区域成矿预测、扩大找矿勘查成果及丰富该类型铀矿成矿理论提供科学依据。[研究方法]基于三穗铀矿床地质、地球化学特征,通过电子探针、扫描电镜等测试,分析了铀成矿机理及成岩成矿的环境演化。[研究结果]本区含铀岩系老堡组形成于震旦纪/寒武纪转折期的陆缘裂谷和陆缘裂陷缺氧还原环境,铀成矿初始物源与海底火山活动有关;铀矿石主要由铀矿物、铁矿物、黏土矿物、有机质及白云石、石英（或玉髓）、重晶石、方解石等组成,呈微晶—隐晶结构、微晶—粉晶晶粒状结构,层状、纹层状构造;铀矿物丰富,主要有沥青铀矿、硅钙铀矿、硒铅铀矿、钛铀矿、磷铀矿及水碳铀等,以纳米—微米级粒状、柱状（粒径多<10 μm）、细脉状、或隐晶质形式赋存于有机质、铁质、黏土矿物等聚铀矿物中。[结论]三穗铀矿床形成物源具有多源性,与雪峰期海底火山作用带来部分成矿物质、燕山—喜马拉雅期成矿流体在运移的途中不断浸取地层内的成矿物质密切相关,经历了铀初始富集、氧化淋滤及热液叠加再富集过程,成因属典型的碳硅泥岩型。三穗铀矿床中发现大量铀矿物显示,铀富集程度高、成矿作用强,找矿远景好、潜力大。创新点：基于三穗铀矿床地质地球化学特征,通过电子探针、扫描电镜等矿物学研究,揭示本区铀成岩成矿的环境演化及成矿机理,探讨了找矿远景。 相似文献
2.
西大明山成矿带碳硅泥岩型铀矿找矿靶区圈定及优选 总被引：1，自引：0，他引：1
通过综合分析大新铀矿床和巴江铀矿床等典型矿床的成矿地质环境、成矿地质特征、铀成矿地质作用,总结西大明山成矿带的铀成矿规律,笔者认为尽管带内存在堆积富集的古溶岩型铀矿,但其不是主要的资源类型,研究区内仍应以寻找热液叠加改造型铀矿为主要找矿目标。同时,总结和归纳了该带热液叠加改造型的碳硅泥岩型铀矿预测要素变量,主要有:前泥盆系剥蚀区、控矿构造、岩体、铀矿化信息、化探异常和有利岩相等。采用固体矿产评价方法和MRAS技术进行找矿靶区圈定和优选,为带内下一步的铀矿勘查提供了依据。 相似文献
3.
新疆伊犁盆地砂岩型铀矿床层间氧化带中粘土矿物特征及与铀矿化关系研究 总被引：2，自引：0，他引：2
新疆伊犁盆地砂岩型铀矿床,由于规模大、成矿环境和成矿条件好,在同类型矿床中具有良好的代表性,研究矿床的成矿作用对今后找矿勘查以及开采具有重要理论意义。本文在区域赋铀层位沉积环境研究基础上,以赋矿围岩为研究主体,对伊犁盆地典型铀矿床沉积序列和矿床的控矿层位开展研究,通过对赋矿沉积层位中粘土质对铀矿成矿的控制作用及与铀矿的空间联系和成因分析,开展系统的铀矿床学、能谱测试、显微结构、扫描电镜、地球化学、氢氧同位素等研究,特别是开展了富矿砂体中粘土矿物的种类、成分、结构、同位素、成因等的研究,对粘土质矿物对铀矿成矿的控制作用进行了系统研究。通过研究粘土矿物在伊犁盆地蒙其古尔砂岩型铀矿床成矿过程中的作用及与铀矿的空间联系和成因分析表明:粘土矿物在层间氧化带中分布较为广泛,在主要矿体的氧化还原过渡带中,尤其是部分具有强烈粘土蚀变的砂岩层中铀含量较其他层位要高,反映出粘土矿物与铀成矿是有成因关联的。通过系统的扫描电镜、能谱测试研究,从微观证明粘土矿物与铀成矿有相关关系;粘土矿物的存在导致在近地表含氧含铀水在经过砂岩孔隙时被具有较强吸附能力和巨大表面自由能的粘土矿物所吸附,形成了铀含量较高的片状,团块状的粘土矿物,其在铀成矿作用中起到了吸附和界面的作用,有利于赋矿空间的形成及定位。结合沉积作用、构造活动和后期流体成矿作用等因素,分析了成矿机制和成矿作用,赋矿层位中的粘土矿物、其它成矿条件如岩性(赋矿层和矿源层)、构造(对铀矿化的动力和对地下水径流及铀矿体)等共同控制了铀成矿作用。 相似文献
4.
5.
6.
若尔盖铀矿田是中国重要的碳硅泥岩型铀矿产地,位于南秦岭铀成矿带西段。矿床群产于下志留统羊肠沟组、塔尔组和拉垅组一套浅变质硅-灰岩系中,并严格受岩性、构造和地球化学环境控制。本文在前人勘查和研究工作的基础上分析了矿田铀矿地质特征、成矿地质条件、成矿机理和铀资源前景,并重点对铀矿石的常量元素、微量元素、稀土元素、铀-钍配分和矿物硫、氢、氧同位素特征进行了研究。初步认为:与铀矿化密切相关的硅质岩生成于热水沉积环境,成矿早期的沉积、变质作用形成了相对广泛的初始铀富集,成矿中、晚期在特定的物理-化学环境下,以大气降水为主源的中低温成矿流体对围岩和初始铀富集体进行了强烈改造,最终形成了以热液改造型为主的工业铀矿化。成矿物质主要来自围岩和初始铀富集体,而部分壳幔含矿物质的介入和岩浆岩的热贡献对铀的后期富集成矿及加大成矿深度起到一定作用。矿田U-Pb同位素年龄测定结果具有多达近10组的铀成矿期,从而增加了矿田的铀成矿几率和铀矿的富集程度。资料分析显示,虽然该区资源/储量规模已达大型铀矿勘查基地条件,但其资源前景和发展潜力远未查明,建议应适时开展系统勘查,以最大限度地开发其资源潜力。 相似文献
7.
南秦岭铀成矿带含铀层位主要是志留系迭部群、舟曲群、白龙江群,总体为一套海相碳硅泥岩建造。主要岩性为灰岩、炭质板岩、炭硅质板岩、硅质岩、硅灰岩,总厚5000—9000m。铀矿床（点）矿化类型以层控热水改造碳硅泥岩型为主,次为层控炭硅泥岩型。铀成矿以燕山晚期-喜山期为主。铀矿化在空间上可划分为迭部、舟曲-武都、文县-康县矿化集中区。铀矿体的空间展布具有分段集中,成群集结的特点。含铀层位分布广,厚度大,铀源丰富,铀矿床（点）带多且工作程度低,找矿前景好。 相似文献
8.
华南白垩-第三纪地壳拉张与铀成矿的关系 总被引：65，自引：0，他引：65
华南是中国最重要的铀矿产区之一。按赋矿围岩的不同 ,该区主要产出花岗岩型、火山岩型和碳硅泥岩型 3类铀矿床。铀矿区都分布有比铀成矿超前形成的富铀岩石 ;铀矿床成矿热液中的水主要为大气成因地下水 ,成矿温度约为 1 2 0～ 2 5 0℃ ,成矿热液的δ1 3 C值主要为 - 4‰～ - 8‰ ,表明幔源CO2 参与了成矿作用 ;矿床的N(3 He) /N(4He)为 0 .1 0～ 2 .0 2Ra,显示成矿热液中大量幔源He的存在。这些铀矿床的成矿时代与赋矿围岩的岩性和时代无关 ,都集中在该区地壳受到强烈拉张因而断陷盆地广泛发育并伴有幔源基性岩浆活动 (基性脉岩、玄武岩 )的白垩—第三纪。研究表明 ,白垩—第三纪导致了地幔与地壳表层沟通的地壳拉张 ,把该区 3大类型的铀矿床串联成了一个有机的整体 :(1 )地壳拉张通过控制向大气成因的贫CO2 热液提供铀成矿必不可少的幔源CO2 ,而与铀成矿发生联系 ;(2 )同一机制形成的富CO2 热液浸取同一或不同铀源岩石中的铀并在不同围岩中成矿 ,形成了按赋矿围岩划分的各种矿床类型 (花岗岩型、火山岩型和碳硅泥岩型 )。 相似文献
9.
核桃坝矿床是著名的沽源-红山子铀成矿带上新近勘查突破的重要铀矿床之一。为恢复成矿过程、划分成矿阶段和探讨矿床成因,本文开展了系统的矿相学和成矿年代学研究,以期为区内铀矿勘查和找矿突破提供理论支持。矿相学研究表明,矿床矿石矿物以铀石为主,成矿作用可划分为早期钠长石化交代阶段、早期热液成矿阶段、晚期热液成矿阶段和成矿后阶段四个阶段。核桃坝矿床属于碱交代型(钠交代)热液铀矿床。沥青铀矿U-Pb同位素表观年龄、电子探针化学年龄以及等时线年龄综合研究显示,矿床形成时代应在99. 1Ma左右,是晚白垩世成矿作用的产物。核桃坝矿床可能是富铀岩体在碱交代作用后形成流体(富铀含硅酸成矿流体)在外部条件改变的情况下沉淀成矿。因此,矿体的定位与富铀岩体关系密切,富铀岩体附近的开放空间(断裂构造、层间破碎带等)是重要的找矿方向。 相似文献
10.
华东早寒武世的“碳硅泥岩”是华东碳硅泥岩型铀矿床的主要赋矿围岩。其铀含量一般高出地壳铀丰度值十余倍。铀矿化层位主要在下寒武统的中下部。早寒武世时江南台隆边缘处于半深海斜坡相的沉积环境中。由于上升洋流的作用将海底金属矿法带到斜坡带。因物化条件的变化铀与磷及多金属元素沉淀富集形成矿源层。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
14.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
16.
17.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
18.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献
19.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献
20.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献