共查询到20条相似文献，搜索用时 625 毫秒
1.
The seismicity of the Baikal rift zone is considered on the basis of instrumental and field observations. The spatial pattern of epicentres, the frequency of earthquakes and the relations between seismicity and the elements of fault tectonics are analyzed. The regional and local stress states in the crust of the Pribaikalye region, obtained from studying earthquake focal mechanisms for various energies are summarized. 相似文献
2.
The focal mechanisms for 86 selected earthquakes (3.0 mb 5.5) located in central Alaska have been investigated from P-wave first motions; the data were gathered by local seismic networks. The results show a depth-dependent characteristic to the fault-plane solutions. For earthquakes having focal depths shallower than 60–70 km, the focal mechanisms indicate either strike-slip or normal faults, while for earthquakes with foci at intermediate depths the focal mechanisms correspond to thrust faults. The nature of the seismicity indicates the hinge line of the Pacific lithospheric plate under the study area to be striking N17°E from Cook Inlet towards interior Alaska. The comparison of the focal mechanisms with the seismicity shows that the strike-slip and normal faults are the predominant processes of stress release along the shallow section of the plate. The earthquakes with intermediate foci systematically occur along the inclined section of the plate. If the gently dipping nodal planes for these earthquakes are chosen as the fault planes, the focal mechanisms correspond to underthrust motions at the foci. In these, the slip vectors are oriented either to the west or north with the resultant being in the N30°W direction. The tension axes for the underthrust solutions are also found to be parallel to the local dip of the plate, indicating that the subducted plate in interior Alaska is undergoing gravitational sinking. 相似文献
3.
A statistical analysis was carried out to investigate spatial associations between natural seismicity and faults in southeastern Ontario and north-central New York State (between 73°18′ and 77°00′W and 43°30′ and 45°18′N). The study area is situated to the west of the seismically active St. Lawrence fault zone, and to the east of the Lake Ontario basin where recently documented geological and geophysical evidence points to possible neotectonic faulting. The weights of evidence method was used to judge the spatial associations between seismic events and populations of faults in eight arbitrarily defined orientation groups. Spatial analysis of data sets for seismic events in the periods 1930–1970 and post-1970 suggest stronger spatial associations between earthquake epicentres and faults with strikes that lie in the NW–SE quadrants, and weaker spatial associations of epicentres with faults that have strikes in the NE–SW quadrants. The strongest spatial associations were determined for groups of faults with strikes between 101° and 146°. The results suggest that faults striking broadly NW–SE, at high angles to the regional maximum horizontal compressive stress, are statistically more likely to be spatially associated with seismic events than faults striking broadly NE–SW. If the positive spatial associations can be interpreted as indicating genetic relationships between earthquakes and mapped faults, then the results may suggest that, as a population, NW–SE trending faults are more likely to be seismically active than NE–SW striking faults. Detailed geological studies of faults in the study area would be required to determine possible neotectonic displacements and the kinematics of the displacements. 相似文献
4.
An updated list of earthquakes and earthquake parameters (location, homogenized magnitude, macroseismic data) for the southern Baltic Sea area reveals activity north of the sea, whereas there are very few epicentres in the sea itself and in the region south of it. This is the first study to combine seismological data for the whole region to cover also the sea. Macroseismic data for the 1930 earthquake were reinvestigated leading to an intensity of V–VI (MM or MSK scale), a radius of perceptibility of 135 km and an unusually big focal depth of about 40 km. It is difficult to correlate individual earthquakes with specific faults, but some seismotectonic relations are suggested, e.g. for the Tornquist zone, the predominant structure of the region. Only few reliable focal-mechanism solutions exist. Possible seismogenic processes (ridge push, isostasy, etc) are discussed. 相似文献
5.
Loredana Bisio Rita Di Giovambattista Girolamo Milano Claudio Chiarabba 《Tectonophysics》2004,385(1-4):121-136
The Sannio-Matese region is one of the most seismically active regions of Italy and has been struck by large historical earthquakes. At present, the area is characterized by low magnitude background seismicity and small seismic sequences following M4 main events. In this paper, we show Vp and Vp/Vs models and 3D locations for a complete set of earthquakes occurring in the period 1991–2001. We observe a significant crustal heterogeneity, with large scale east-verging high Vp fault-related-folds, stacked by the Pliocene compression. The relocated earthquakes cluster along a 70° east-dipping, NW-striking plane located at the border of the high Vp thrust units. Normal fault earthquakes related to the young and active extension occur within these high Vp zones, interpreted as high strength material. We expect large future earthquakes to occur within these high Vp zones actually characterized by low magnitude seismicity at their borders. 相似文献
6.
A seismicity map of that part of the Pakistan-Afghanistan region lying between the latitudes 28° to 38°N and longitudes 66° to 75°E is given using all available data for the period 1890–1970. The earthquakes of magnitude 4.5 and above were considered in the preparation of this map. On the basis of this map, it is observed that the seismicity pattern over the well-known Hindukush region is quite complex. Two prominent, mutually orthogonal, seismicity lineaments, namely the northvestern and the north-eastern trends, characterize the Hindukush area. The northwestern trend appears to extend from the Main Boundary Fault of the Kashmir Himalaya on the southeast to the plains of the Amu Darya in Uzbekistan on the northwest beyond the Hindukush. The Sulaiman and Kirthar ranges of Pakistan are well-defined zones of intermontane seismicity exhibiting north-south alignment.Thirty-two new focal-mechanism solutions for the above-mentioned region have been determined. These, together with the results obtained by earlier workers, suggest the pre-dominance of strike-slip faulting in the area. The Hazara Mountains, the Sulaiman wrench zone and the Kirthar wrench zone, as well as the supposed extension of the Murray ridge up to the Karachi coast, appear to be mostly undergoing strike-slip movements.In the Hindukush region, thrust and strike-slip faulting are found to be equally prevalent. Almost all the thrust-type mechanisms belonging to the Hindukush area have both the nodal planes in the NW-SE direction for shallow as well as intermediate depth earthquakes. The dip of P-axes for the events indicating thrust type mechanisms rarely exceeds 35°. The direction of the seismic slip vector obtained through thrust type solutions is always directed towards the northeast. The epicentral pattern together with these results suggest a deep-seated fault zone paralleling the northwesterly seismic zone underneath the Hindukush. This NW-lineament has a preference for thrust faulting, and it appears to extend from the vicinity of the Main Boundary Fault of the Kashmir Himalaya on the southeast of Uzbekistan on the northwest through Hindukush. Almost orthogonal to this NW-seismic zone, there is a NE-seismic lineament in which there is a preference for strike-slip faulting.The above results are discussed from the point of view of convergence of the Indian and Eurasian plates in the light of plate tectonics theory. 相似文献
7.
The Makassar Strait region has had the highest frequency of historical tsunamievents for Indonesia. The strait has a seismic activity due to the convergenceof four tectonic plates that produces a complex mixture of structures. The maintsunamigenic features in the Makassar Strait are the Palu-Koro and Pasternostertransform fault zones, which form the boundaries of the Makassar trough.Analysis of the seismicity, tectonics and historic tsunami events indicatesthat the two fault zones have different tsunami generating characteristics.The Palu-Koro fault zone involves shallow thrust earthquakes that generatetsunami that have magnitudes that are consistent with the earthquakemagnitudes. The Pasternoster fault zone involves shallower strike-slipearthquakes that produce tsunami magnitudes larger than would normallybe expected for the earthquake magnitude. The most likely cause for theincreased tsunami energy is considered to be submarine landslidesassociated with the earthquakes. Earthquakes from both fault zonesappear to cause subsidence of the west coast of Sulawesi Island.The available data were used to construct a tsunami hazard map whichidentifies the highest risk along the west coast of Sulawesi Island.The opposite side of the Makassar Strait has a lower risk because it isfurther from the historic tsunami source regions along the Sulawesicoast, and because the continental shelf dissipates tsunami wave energy.The greatest tsunami risk for the Makassar Strait is attributed tolocally generated tsunami due to the very short travel times. 相似文献
8.
New seismicity and focal-mechanism data from the area of the Azores Islands, in the Mid-Atlantic Ridge, to the Alboran Sea and the southern part of Spain are presented.As a consequence of the different characters in the focal-mechanism solutions and b-values associated, the area has been divided in four different parts, namely, Mid-Atlantic and Terceira Ridge, Azores—Gibraltar fault, Gulf of Cadiz, Alboran Sea and Betica. The last two form the interaction between the Eurasian and African continental plates.The fracture zone is the locus of very large earthquakes with mechanisms showing a predominant right-lateral horizontal motion. Seismic foci in the continental interaction zone are spread over the whole region with mechanisms changing in character from west to east. It is suggested that this may be consequence of the behaviour of the Spanish Peninsula as a partly independent subplate. In the eastern part of the studied zone, the so-called Alboran plate may be considered as a buffer plate. 相似文献
9.
Ten new focal mechanisms are derived for earthquakes in southern Central America and its adjacent regions. These are combined with a study of seismicity and data of previous workers to delineate the position and nature of the plate boundaries in this complex region.The Middle America subduction zone may be divided into four or five distinct seismic segments. The plate boundary between North America and the Caribbean near the trench might be located more towards the south than previously suspected. Subduction has basically stopped south of the underthrusting Cocos Ridge. There is not much evidence for a seismically active strike-slip fault south of Panama, but its existence cannot be ruled out. More activity reveals the zone north of Panama which is identified as a subduction zone with normal fault events. Shallow seismicity induced by the interaction of the Nazca plate extends from the Colombia-Panama border south along the Pacific coast to meet a high-angle continental thrust fault system. Subduction with a pronounced slab starts only south of that point near a hot region which offsets the seismic trend at the trench. The Carnegie Ridge and/or the change of direction of subduction in Ecuador produce a highly active zone of seismicity mainly at the depth of 200 km. The area in the Pacific displays a termination of activity at a propagating rift west of the Galapagos Islands. The main eastern boundary of the Cocos plate, the Panama Fracture Zone, is offset towards the west at the southern end of the Malpelo Ridge. Its northern end consists of two active branches as defined by large earthquakes. A strike-slip mechanism near the southeastern flank of the Cocos Ridge was previously believed to be the site of an extended fracture zone. This paper proposes submarine volcanic activity as an alternative explanation. 相似文献
10.
A temporary network of microearthquake seismographs deployed in the northern part of Svalbard recorded numerous earthquakes during the summer of 1982. Most of the earthquakes occurred in concentrated zones in restricted portions of three fault complexes in central Nordaustlandet, but minor activity also occurred to the east and west of these complexes. Within the uncertainty of the epicentral locations, most earthquakes which occurred on land in regions not covered by glaciers could be associated with segments of mapped faults. There are numerous fault segments and even entire faults, however, along which no recorded earthquake occurred. The concentrated spatial locations of these earthquakes along preferred portions of mapped faults, and the absence of throughgoing lines of activity, suggest that these are intraplate earthquakes occurring along existing faults in response to an applied stress field. Composite fault-plane solutions for the three most active regions each include one nodal-plane which can be associated, at least roughly, with a trend of seismicity and trend of a mapped fault. The directions of greatest principle stress for the three fault plane solutions vary between N90°W and N55°W, directions which agree approximately with maximum stress directions determined for a region about 200 km to the south. The consistency of the directions of maximum principle stress obtained for earthquakes throughout a broad region of Svalbard suggests that the earthquakes there occur in response to a stress field which is of plate tectonic origin. 相似文献
11.
R. M. W. Musson 《Natural Hazards》1997,15(2-3):105-119
Although the U.K. is in an area of only low to moderate seismicity, the seismic hazard is sufficient to pose a threat to sensitive structures such as chemical plants and nuclear facilities. In quantifying the level of hazard by conventional probabilistic methodology, however, some problems arise in attempting to interpret earthquake data in terms of geological structure and faults. In the U.K., not only is it impossible to identify any demonstrably active faults, but also it is extremely difficult to discern any relationship between the pattern of seismicity and local or regional geological structure.This study discusses the use of two zonation approaches which complement each other in such a way that the general character and trend of seismicity is preserved. In one approach, the zonation is informed by the structural geology, where possible; geological zonation is avoided if it produces sources with heterogeneous seismicity. In the other approach, the record of past earthquakes is divided up into very small zones around individual epicentres or groups of epicentres, the size of each zone usually being proportional to the uncertainty in the epicentral determination of the appropriate event. This zonation preserves an observed tendency of some British earthquakes to repeat themselves. It is suggested that, in intraplate areas such as the U.K., it is often inappropriate to attempt to model individual fault sources. No faults in the U.K. are provably active. Because an earthquake of moderate size can occur on a very short fault segment, it is impractical to restrict fault modelling to major features. Even the two largest U.K. faults, suspected to be active, pose problems in attributing historical seismicity to them as distinct features. 相似文献
12.
In estimating the likelihood of an earthquake hazard for a seismically active region, information on the geometry of the potential
source is important in quantifying the seismic hazard. The damage from an earthquake varies spatially and is governed by the
fault geometry and lithology. As earthquake damage is amplified by guided seismic waves along fault zones, it is important
to delineate the disposition of the fault zones by precisely determined hypocentral parameters. We used the double difference
(DD) algorithm to relocate earthquakes in the Koyna-Warna seismic zone (KWSZ) region, with the P- and S-wave catalog data
from relative arrival time pairs constituting the input. A significant improvement in the hypocentral estimates was achieved,
with the epicentral errors <30 m and focal depth errors <75 m i.e. errors have been significantly reduced by an order of magnitude
from the parameters determined by HYPO71. The earthquake activity defines three different fault segments. The seismogenic volume is shallower in the south by 3 km,
with seismicity in the north extending to a depth of 11 km while in the south the deepest seismicity observed is at a depth
of 8 km. By resolving the structure of seismicity in greater detail, we address the salient issues related to the seismotectonics
of this region. 相似文献
13.
Although the Southwest Seismic Zone (SWSZ), located about 150 km to the east of Perth in southwestern Australia, is one of the most seismically active areas in Australia, there is little understanding as to why the earthquakes are occurring.An analysis of geophysical, geological and geodetic data from the area suggests that the SWSZ coincides with a Precambrian terrane boundary. Seismic data show that the terrane boundary zone dips at a shallow angle in a northeasterly direction. Reactivation of this ‘zone of weakness’ in the contemporary stress field (east–west maximum horizontal stress) is interpreted to be the first-order control on seismicity in the region.Gravity data show that the terrane boundary is offset by near-orthogonal structures, which are interpreted as faults. At least one of these trends corresponds with a linear zone of epicentres. The temporal and spatial distributions of epicentres associated with the 1968 Meckering earthquake (ML 6.9) suggest that the second-order distribution of seismicity in the SWSZ can be explained by the ‘intersection model’, whereby stresses are amplified by space problems associated with displacements on crosscutting faults.It is speculated that a zone of high density and high seismic velocity in the lower crust may also be a second-order control on the local seismicity. However, confirmation awaits better delineation of the extent of this zone. 相似文献
14.
We relocated over 1000 earthquakes of magnitude > 0.1 occurring between 1973 and 2001 in the Bering Glacier region of southern Alaska. We used first-motion data from these events to determine focal mechanisms and directly invert for stress orientations. Our results indicate that much of the seismicity in the region is occurring within the North American plate in a zone where an inferred structure, which lies beneath Bering Glacier, intersects the Chugach-St. Elias fault system. Stress-field analysis indicates that the events in the Bering Glacier surge reservoir region are likely occurring on northeast-trending thrust faults, consistent with previous modeling that suggested thrust faulting would be enhanced in regions of ice draw down. We also observe a stress field compatible with either high-angle normal or reverse faulting in regions located northwest of the Bering Glacier. This may indicate localized complexities in interactions between the Bering Glacier structure and the Chugach-St. Elias fault system. 相似文献
15.
The epicentral tract of the great Assam earthquake of 1897 of magnitude 8·7 was monitored for about 6 months using an array
of portable seismographs. The observed seismicity pattern shows several diversely-oriented linear trends, some of which either
encompass or parallel known geological faults. A vast majority of the recorded micro-earthquakes had estimated focal depths
between 8–14 km. The maximum estimated depth was 45 km. On the basis of a seismic velocity model for the region reported recently
and these depth estimates we suggest that the rupture zone of the great 1897 earthquake had a depth of 11–12 km under the
western half of the Shillong massif. Four composite fault plane solutions define the nature of dislocation in three of the
seismic zones. Three of them show oblique thrusting while one shows pure dip slip reverse faulting. The fault plane solutions
fit into a regional pattern of a belt of earthquakes extending in NW-SE direction across the north eastern corner of the Bengal
basin. The maximum principle stress axis is approximately NS for all the solutions in conformity with the inferred direction
of the Indian-EuroAsian plate convergence in the eastern Himalaya. 相似文献
16.
We have studied the focal mechanisms of the 1980, 1997 and 1998 earthquakes in the Azores region from body-wave inversion of digital GDSN (Global Digital Seismograph Network) and broadband data. For the 1980 and 1998 shocks, we have obtained strike–slip faulting, with the rupture process made up of two sub-events in both shocks, with total scalar seismic moments of 1.9 × 1019 Nm (Mw = 6.8) and 1.4 × 1018 Nm (Mw = 6.0), respectively. For the 1997 shock, we have obtained a normal faulting mechanism, with the rupture process made up of three sub-events, with a total scalar seismic moment of 7.7 × 1017 Nm (Mw = 5.9). A common characteristic of these three earthquakes was the shallow focal depth, less than 10 km, in agreement with the oceanic-type crust. From the directivity function of Rayleigh (LR) waves, we have identified the NW–SE plane as the rupture plane for the 1980 and 1998 earthquakes with the rupture propagating to the SE. Slow rupture velocity, about of 1.5 km/s, has been estimated from directivity function for the 1980 and 1998 earthquakes. From spectral analysis and body-wave inversion, fault dimensions, stress drop and average slip have been estimated. Focal mechanisms of the three earthquakes we have studied, together with focal mechanisms obtained by other authors, have been used in order to obtain a seismotectonic model for the Azores region. We have found different types of behaviour present along the region. It can be divided into two zones: Zone I, from 30°W to 27°W; Zone II, from 27°W to 23°W, with a change in the seismicity and stress direction from Zone I. In Zone I, the total seismic moment tensor obtained corresponded to left-lateral strike–slip faulting with horizontal pressure and tension axes in the E–W and N–S directions, respectively. In Zone II, the total seismic moment tensor corresponded to normal faulting, with a horizontal tension axis trending NE–SW, normal to the Terceira Ridge. The stress pattern for the whole region corresponds to horizontal extension with an average seismic slip rate of 4.4 mm/yr. 相似文献
17.
I.B. Everingham 《Tectonophysics》1974,23(4):323-338
A catalogue of 1873–1972 earthquakes with M > 6.9 for the New Guinea—Solomon Islands region (130–165° E) is compiled. There are 152 events listed. Duda's (1965) results for 1900–1968 are improved for the Papua New Guinea area (141–156° E) because of the availability of historical data for that area.Although there is evidence of rapid Holocene uplift in the main seismic zones, there is little historical evidence for visible uplift or subsidence resulting directly from modern major earthquakes. Coastal subsidences commonly reported as a result of earthquakes are of smaller extent and appear to be due to settlement. However, the occurrence of tsunamigenic earthquakes does suggest that surface deformations do take place off-shore.Using Davies and Brune's (1971) method, regional fault slip rates over 5° -segments of the shallow seismic zone are determined from the seismicity catalogue. The slip rate for the island of New Guinea (Gutenberg and Richter's Region 16) is found to be at least 4.4 cm/y which is almost double the very anomalously low rate of 2.3 cm/y found by Davies and Brune (1971). If allowance is made for shear movement without seismicity and for the approximately
ratio of dip-slip versus strike-slip faulting indicated by fault plane solutions, the agreement with Le Pichon's (1970) approach value of 10.7 cm/y for the Pacific—India (Australia) plates is reasonable. The fault slip rate in the area between east New Britain and Bougainville at the Pacific—Bismarck—Solomon triple junction is extremely high (20.6 cm/y at least). The smallest slip rate (1.5 cm/y) is found for westernmost New Guinea (130–135° E).Temporal cumulative summation of moments curves show a periodicity of approximately 25 years in the seismic activity at the triple junction (150–155° E). Elsewhere the rate of seismic activity is aperiodic. 相似文献
18.
The present status of reservoir induced seismicity investigations with special emphasis on Koyna earthquakes 总被引：2，自引：0，他引：2
Harsh K. Gupta 《Tectonophysics》1985,118(3-4)
The status of Reservoir Induced Seismicity (RIS) has been reviewed periodically (Rothé, 1968, 1973; Gupta and Rastogi, 1976; Simpson, 1976; Packer et al., 1979). In the present paper, the significant work carried out during the last three years on RIS is reviewed.An earthquake of magnitude
occurred on November 14, 1981 in the vicinity of Aswan Lake, Egypt, 17 years after the filling started in 1964. This event occurred 4 days after the seasonal maximum in the reservoir water level and was followed by a long sequence of aftershocks. Another event of magnitude
occurred in the vicinity of Aswan Lake on August 20, 1982. Results of preliminary investigations indicate that this seismic activity is reservoir induced. Recent analyses of induced seismic events at Nurek Reservoir U.S.S.R., show that the second stage of filling during August to December 1976, increasing the maximum depth from 120 m to 200 m, was accompanied by an intense burst of shallow seismic activity. An outward migration from the centre of the reservoir, possibly associated with diffusion of pore pressure, is revealed by the temporal distribution of earthquake foci. A variety of investigations including the in situ measurement of tectonic stress, pore pressure, permeability, distribution of faults, etc., in addition to monitoring seismicity, have been undertaken in the vicinity of the Monticello Reservoir, South Carolina. The largest reservoir induced earthquake is predicted not to exceed magnitude 5.The Koyna Reservoir, India, continues to be the most outstanding example of RIS. Three earthquakes of magnitude
5 occurred in September 1980. Earthquakes of magnitude 4 occur frequently in the vicinity of Koyna, the latest being on February 5, 1983. Events that occurred during the period 1967–1973 have been relocated using better procedures and are found to be much shallower and the epicentres less diffused. Location of 12 earthquakes of Ms 4.0, their foreshocks and aftershocks, that occurred during 1973–1976, composite focal mechanism solutions and related studies are consistent with the delineation of a N-S trending fault through the reservoir area. In a couple of interesting studies it has been demonstrated that earthquakes of magnitude 5.0 in the Koyna region are usually preceded by several magnitude 4 earthquakes in the preceding fortnight. Also, a rate of loading of Koyna reservoir of at least 40 ft/week appears to be a necessary, although not sufficient, condition for the occurrence of magnitude 5 earthquakes. Smooth filling/emptying appears to be the key to reduce the hazard of RIS.A map and a table of the reported cases of reservoir induced changes in seismicity through 1982 have been compiled. 相似文献
19.
R. A. Schweickert M. M. Lahren K. D. Smith J. F. Howle G. Ichinose 《Tectonophysics》2004,392(1-4):303
Dextral transtensional deformation is occurring along the Sierra Nevada–Great Basin boundary zone (SNGBBZ) at the eastern edge of the Sierra Nevada microplate. In the Lake Tahoe region of the SNGBBZ, transtension is partitioned spatially and temporally into domains of north–south striking normal faults and transitional domains with conjugate strike-slip faults. The normal fault domains, which have had large Holocene earthquakes but account only for background seismicity in the historic period, primarily accommodate east–west extension, while the transitional domains, which have had moderate Holocene and historic earthquakes and are currently seismically active, primarily record north–south shortening. Through partitioned slip, the upper crust in this region undergoes overall constrictional strain.Major fault zones within the Lake Tahoe basin include two normal fault zones: the northwest-trending Tahoe–Sierra frontal fault zone (TSFFZ) and the north-trending West Tahoe–Dollar Point fault zone. Most faults in these zones show eastside down displacements. Both of these fault zones show evidence of Holocene earthquakes but are relatively quiet seismically through the historic record. The northeast-trending North Tahoe–Incline Village fault zone is a major normal to sinistral-oblique fault zone. This fault zone shows evidence for large Holocene earthquakes and based on the historic record is seismically active at the microearthquake level. The zone forms the boundary between the Lake Tahoe normal fault domain to the south and the Truckee transition zone to the north.Several lines of evidence, including both geology and historic seismicity, indicate that the seismically active Truckee and Gardnerville transition zones, north and southeast of Lake Tahoe basin, respectively, are undergoing north–south shortening. In addition, the central Carson Range, a major north-trending range block between two large normal fault zones, shows internal fault patterns that suggest the range is undergoing north–south shortening in addition to east–west extension.A model capable of explaining the spatial and temporal partitioning of slip suggests that seismic behavior in the region alternates between two modes, one mode characterized by an east–west minimum principal stress and a north–south maximum principal stress as at present. In this mode, seismicity and small-scale faulting reflecting north–south shortening concentrate in mechanically weak transition zones with primarily strike-slip faulting in relatively small-magnitude events, and domains with major normal faults are relatively quiet. A second mode occurs after sufficient north–south shortening reduces the north–south Shmax in magnitude until it is less than Sv, at which point Sv becomes the maximum principal stress. This second mode is then characterized by large earthquakes on major normal faults in the large normal fault domains, which dominate the overall moment release in the region, producing significant east–west extension. 相似文献
20.
《地学前缘(英文版)》2022,13(4):101399
The Pamir-Hindu Kush region at the western end of the Himalayan-Tibet orogen is one of the most active regions on the globe with strong seismicity and deformation and provides a window to evaluate continental collision linked to two intra-continental subduction zones with different polarities. The seismicity and seismic tomography data show a steep northward subducting slab beneath the Hindu Kush and southward subducting slab under the Pamir. Here, we collect seismic catalogue with 3988 earthquake events to compute seismicity images and waveform data from 926 earthquake events to invert focal mechanism solutions and stress field with a view to characterize the subducting slabs under the Pamir-Hindu Kush region. Our results define two distinct seismic zones: a steep one beneath the Hindu Kush and a broad one beneath the Pamir. Deep and intermediate-depth earthquakes are mainly distributed in the Hindu Kush region which is controlled by thrust faulting, whereas the Pamir is dominated by strike-slip stress regime with shallow and intermediate-depth earthquakes. The area where the maximum principal stress axis is vertical in the southern Pamir corresponds to the location of a high-conductivity low-velocity region that contributes to the seismogenic processes in this region. We interpret the two distinct seismic zones to represent a double-sided subduction system where the Hindu Kush zone represents the northward subduction of the Indian plate, and the Pamir zone shows southward subduction of the Eurasian plate. A transition fault is inferred in the region between the Hindu Kush and the Pamir which regulates the opposing directions of motion of the Indian and Eurasian plates. 相似文献