共查询到20条相似文献,搜索用时 46 毫秒
1.
HE Jurui WANG Aiguo RUI Xingjian LI Chunhai Nanjing Institute of Geology Mineral Resources Nanjing Jiangsu 《《地质学报》英文版》2004,78(2):375-379
In the Precambrian System of the Yangtze and Cathaysian plates six ore-bearing formations can be identified: the Cu-Pb-Zn-bearing formations in volcanic rocks of marine facies of the Neoarchean-Paleoproterozoic, Cu-Au-bearing formations and Pb-Zn-bearing formations in volcanic rocks of marine facies of the Mesoproterozoic, Pb-Zn-bearing formations in volcaniclastic rock and carbonate rock of the Neoproterozoic, Fe-Mn-bearing formations in the volcaniclastic rock of the Neoproterozoic, and Ni-Cr-serpentine-bearing formations in ophiolite and ultrabasic rock of the Meso- and Neoproterozoic. They were mostly formed in the marginal rift valleys of the Yangtze and Cathaysian plates, where occur stratabound and stratiform ore deposits, thermal deposits and porphyry polymetallic deposits. The six regions with ore-bearing formations have good prospects for ore deposits. 相似文献
2.
The ore-forming material sources of the Baiyangping copper-cobalt-silver polymetallic deposit have been studied in view of the S, Pb, C, O and H isotopic characteristics and the ratio of Co/Ni of cobaltite. The results showed that sulfur in metallic sulfides may have come from a mixed sulfur-source consisting of the sulfur-source from metamorphic rocks in the basin basement with basic volcanic rocks and the sulfur-source from basin sulfates; lead in the ores was provided by the sedimentary rocks and basement rocks; CO2 in ore-forming fluids was derived from thermolysis of altered and normal marine facies carbonates and decarboxylation of sedimentary organic matter respectively; the ore-forming fluids belong to the SO4-Cl-Na-Ca-type basin thermal brines derived from paleo-meteoric waters; cobalt in the deposit may also be derived from the metamorphic rocks in the basin basement with basic volcanic rocks. 相似文献
3.
The Late Cretaceous Crustal Magmatism of the Geza Arc Metallogenic Belt in Yunnan Province, and Zircon Ages and Hf Isotopic Evidence of the Porphyry Cu-Mo Mineralization 下载免费PDF全文
<正>Objective The Geza arc in Yunnan Province,located in the southern Yidun arc,is an important part of the Sanjiang tectonic-magmatic belts in southwestern China and is a newly discovered copper polymetallic ore-concentrating district.Recent studies show that the newly discovered Yanshanian porphyry Cu-Mo polymetallic mineralization superimposed in the Indosinian porphyry copper belt in 相似文献
4.
The Upper Permian strata in Qujiang-Renhua area, Guangdeng Province, is a coalbearing sequence. Based on sedimentary faeies analysis and corelation of chemical variation in sedimentary rocks, the following regularities can be notieed: (1) The evolution of continental facies→transitional facies→marine facies is reflected by the deereasing tendency of K, Ga, Ti and the inerease in Mg, Ca, and Sr; (2) K, Ga, and Ti exhibit a tendency of decrease and Ca, Mg, V, and Sr tend to increase in the sequence of lacustrine faeies→laterlal facies→gulf and lagoonal facies. (3) Lacustrine facies→lagoonal facies→gulf facies is paralled by decrease in K, Cu, Pb, V, and Ba as well as an increase in Ca, Mg and Mn in sideritie redules. (4) Discussions arc also made in the paper on the differences between drill core samples and surface samples, between pyrite, siderite and ealc-siliceous nodules, and between light and heavy minerals separated from sandstone in respect bo their components (Tables 2, 3, 4, 5). 相似文献
5.
Magmatic Hydrothermal Origin of the Wenyu Copper Polymetallic Deposit, Southern Lancangjiang Zone, SW China 总被引:1,自引:0,他引:1
<正>The Wenyu copper polymetallic deposit,with proven reserves of about 0.23 Mt Cu,394 t Ag and0.04 Mt Pb,is located in the central part of the Lancangjiang volcanic rock belt(Fig.1a),which is one of the most potential copper polymetallic exploration areas in SW China.The Wenyu deposit is hosted in the Xiaodingxi Formation volcanic 相似文献
6.
Ore-forming fluid characteristics and ore-forming materials source of the Tudimiaogou – Yindongshan lead-zinc polymetallic orefield, west Henan 下载免费PDF全文
TAN Huajie SHAO Yongjun ZHENG Minghong ZHOU Houdi ZHANG Jiandong PENG Guangxiong Cheng Luping 《《地质学报》英文版》2017,91(Z1):227-228
<正>1 Introduction The Tudimiaogou-Yindongshan lead-zinc polymetallic orefield is located in the Tudimiaogou-Weimoshi lead and zinc silver polymetallic metallogenic belt.The belt is an important part of southwestern Henan lead and zinc 相似文献
7.
Ji LeiNanjing Institute of Geography Limnology Academia Sini Nanjing Jiang Minxi 《《地质学报》英文版》1994,68(4):435-449
The Cambrian-Ordovician rocks in southwestern Jiangxi are mainly composed of deep-water deposits, in which 5 facies have been recognized: sandstone facies, sandstone-mudstone facies, siltstone-mudstone facies, mudstone (slate)facies, and chert facies. They are of turbidity current origin and are related to pelagic and hemipelagic deposits. In the light of facies distribution, the Cambrian-Ordovician deposits can be classified into 3 facies associations formed in middle fan, outer fan and deep-sea plain environments respectively. The 3 different orders of vertical cycles in the stratigraphic sequence are considered to be controlled by factors such as sea-level fluctuation, basin subsidence and submarine fan progradation. The tectonic setting of the sedimentary basin is interpreted as passive continental margin based on the chemical composition analysis of the sandstone. 相似文献
8.
The Geochemical Characteristics and Metallogenic Mechanism of the Daliangzi Pb-Zn Deposit in Sichuan Province 下载免费PDF全文
<正>1 Introduction Daliangzi large-sized Pb-Zn deposit,located in the Western Margin of Yangtze Plate,is typical Pb-Zn deposit in the sichuan-yunnan-guizhou polymetallic metallogenic belt.Ore bodies are hosted in Sinian 相似文献
9.
YANG Houng-Yi WU Yenming Department of Earth Sciences Cheng Kung University Tainan Chinaand WU Cailai Institute of Geology Chinese Academy of Sciences Beijing China 《《地质学报》英文版》2002,76(1):1-14
A contact zone sandwiched between an arc and an oceanic crust was discovered in the Laohushan area in the present study. It consists of a series of north-dipping imbricated thrust sheets and is exposed on the surface as a narrow arcuate belt, which extends for about 30 km in an E-W direction and measures about 1-3 km wide. Lithologically, it can be divided into four subzones. Subzone 1 consists of meta-andesite and metasandstone; subzone 2, psammitic schists; subzone 3, psammitic and pelitic schists, quartz diorite and hornfelses; and subzone 4, metagabbro, epidote amphibolite and pelitic schists. The metamorphism has the following grading sequence: low greenschist facies in subzone 1 → high greenschist facies in subzone 2 →low amphibolite facies in subzone 3→ epidote amphibolite facies in subzone 4. Petrographic and geochemical evidence shows that rocks in subzones 1, 2 and 3 are arc rocks, whereas those of subzone 4 are oceanic crustal rocks. The metamorphic mineral assemblages and especially miner 相似文献
10.
<正>In recent years,china shale gas exploration and practice confirmed that shale gas resources distributed in the marine facies,the marine-continental transitional facies and lacustrine facies.Three types of shale gas resources have the same resource potential and different geological conditions(Zhang Dawei,etc.,2012).Lacustrine shale influenced by local climate and provenance,since they have the geological features of rapid litho facies change, 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
13.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
14.
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
18.
Marta L. PATINO-DOUCE Alberto PATINO-DOUCE Mazhar QAYYUM Roger L. NIELSEN 《Geostandards and Geoanalytical Research》1994,18(2):195-198
We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al2 O3 -SiO2 ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses. 相似文献
19.
岩石密度和超高压岩石折返速率 总被引:1,自引:3,他引:1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
20.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献