首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
<正>The Pulang porphyry copper deposit,located in the Gezan tectonic-magmatic arc and south of the Yidun island arc,southwest of Sanjiang metallogenic belt in Yunnan province,is a super-large porphyry copper deposit.During recent decades,the Pulang deposit has attracted wide attention among geologists both at home and abroad.Many previous researches have discussed its  相似文献   

2.
A Preliminary Review of Metallogenic Regularity of Copper Deposits in China   总被引：3，自引：0，他引：3  
Copper resources in China are rich, but imported copper products are still required. Researches on metallogenic regularity of major types of copper deposits by geologists have involved in worldwide classification, significant copper belts, representative copper deposits, etc. Studies on metallogenic regularity of copper deposits in China also have made achievements with a long-term work. Combined with latest exploration advances obtained in recent ten years, this review aims to conclude the achievements of researches on copper metallogenic regularity in China. Based on data of 814 copper deposits and other ore (mineralized) occurrences, ten prediction types of copper deposits have been suggested. Porphyry and skarn copper ores are taken as the key targets. Porphyry copper deposits are the most important one which concentrate in Gangdese, Changdu-Sanjiang, Dexing and East Tianshan. The Cenozoic and Mesozoic are the major metallogenic epochs. Four main metallogenic epochs are been studied based on the copper ore geochronological data including Precambrian Era (Archean and Proterozoic), Paleozoic Era, Mesozoic Era and Cenozoic Era. Based on the study of metallogenic series of ore deposits in China, twenty-seven metallogenic series of copper deposits are proposed. This is suggested to deepen the study of metallogenic regularity of copper ore and provide the theory guide for copper resources prediction in China.  相似文献   

3.
<正>1 Introduction The Sanjiang metallogenic belt is one of the important nonferrous metal metallogenic belts in China,the potential resources of copper,lead,zinc,silver,gold and tin are huge(Zhengqian et al.,1993).In the west of Yunnan province has a lot of Yanshanian granite,according to 1:20 million test data,development of granite belt rich in radioactive minerals in the west of Yunnan  相似文献   

4.
In accordance with the terms global minerogenic series, regional metallogenic series and ore depositsystem which are put forward here, metallogenic environments at different levels are discussed for theporphyry copper deposit series in China. It is considered that the porphyry copper deposits in China arecontrolled not only by the boundaries of convergent plates but, more importantly, by the boundaries ofintraplate divergent mobile belts and those between continental blocks. Besides, the emplacement ofhypabyssal and supper-hypabyssal calc-alkaline magmas and the temporal-spatial distribution of China'sporphyry copper deposits are governed by the superimposition of fracture systems of the pre-Alpine base-ments. Meso-Cenozoic cover and continental-margin new-born crust. Such a superimposition has also re-sulted in the polycyclicity of the mineralization.  相似文献   

5.
正Objective As the third most important copper polymetallic metallogenic belt in Tibet,the Bangongco–Nujiang metallogenic belt(BNMB)has attracted much attention among geoscientists all over the world(Lin Bin et al.,2017a).There are two ore clusters in the western of BNMB,the Duolong giant porphyry-epithermal Cu(Au,Ag)ore cluster and the Ga’erqiong–Galalelarge porphyry-  相似文献   

6.
The Devonian volcano-passive continental margin in southern Altay is a significant volcanogenic massive sulphide metallogenic belt. Acidic volcanism has been dominant on the inner side of the volcano-passive continental margin, i.e., near the old land, resulting in a Pb-Zn metallogenic sub-belt, in which the ore deposits are hosted by sedimentary rocks in volcanic series, as represented by the large Koktal Pb-Zn deposits. In the central part of the margin far away from the old land, bimodal volcanic formations are well developed, forming volcanics-hosted Cu-Zn metallogenic sub-belts, e.g., the large-scale Ashele Cu-Zn deposit. The Qiaoxiahala sub-belt on the outer side of the margin near the ocean ridge is located at the spreading central trough, where ophiolite suites are developed. This type of deposits is rich in gold and copper, similar to the Cyprus-type Fe-Cu-Au metallogenic sub-belt in metallogenic environment (represented by the Qiaoxiahala medium-scale Fe-Cu-Au deposit). From the old land to th  相似文献   

7.
Based upon a comprehensive study of 123 copper deposits in China. this paper reaches the following conclusions: 1. The crust in China was solidified pretty late; with the accretion of the plate, the copper mineralization moved towards its margin in space and became successively younger in age. 2. The major copper ore types ever found in the world have mostly been discovered in China, in which the porphyry type seems to be the most important and the massive sulfide type in the transitional bed between marine clastic and carbonate rocks is clearly defined. 3. Carbonate strata are widespread in China and their deposition lasted for a long geological period, so the proportion of copper deposits occurring in them is large as compared with other parts of the world. 4. Seven metallogenic epochs can be recognized, in which the Mesozoic one plays the leading role and the middle(late) Palaeozoic and Cenozoic ones are next in importance. Mineralization was comparatively simple in the early geological period. and became diversified later on. In the early epochs copper deposits related to basaltic magmatism and metamorphosed marine sediments predominated, whereas in the later epochs those related to granitic magmatism and continental sedimentation were dominant. 5. There exist in China thirteen metallogenic provinces, of which the Lower Yangtze downwarping belt, Sanjiang fold system, Jiangnan axis and Xikang-Yunnan axis are of greater significance. 6. The crustal mobility in China was rather pronounced, the polycyclic evolution of the crust has resulted in such obvious phenomena as the inheritance of mineralization, the coexistence of various types and the superposition of different genetic types.  相似文献   

8.
The Dexing porphyry copper ore mine is located in the Qin-Hang metallogenic belt between the Yangtze block and the Cathaysia block. It is a giant porphyry copper mine in China, including 3 ore districts: Tongchang, Fujiawu and Zhushahong. Our analyses of Re in molybdenite indicate that the ore-forming material of the copper ore deposits in Dexing should be mainly mantle-derived. Our study fills in a gap in the study of formation time of the Dexing copper mine, and further proves that the copper ore deposits in the three ore districts should be formed simultaneously, about 170 Ma, belonging to the early Yanshan period, and that the formation time of the copper ore deposits should be consistent with the formation time of granodiorite porphyry in which the copper ore deposits are hosted. Promising areas for seeking porphyry copper ore deposits is predicated to be the west or southwest of Dexing.  相似文献   

9.
<正>The Ailao Mountain is one of the most important metallogenic belts of polymetallic deposits in the Sanjiang region,southwestern China.Located in the southern segment of this metallogenic belt,the newly-discovered Chang’an gold deposit is large in scale(Fig.1A),and has attracted much attention among geologists.The ore-hosted  相似文献   

10.
Cobalt Deposits of China: Classification, Distribution and Major Advances   总被引：2，自引：0，他引：2  
The important strategic metal cobalt has diverse uses and the majority of world cobalt deposits have been found in China. The deposits can be classified into four types, i.e., magmatic Ni-Cu-Co sulfide deposits, hydrothermal and volcanogenic cobalt polymetallic deposits, strata-bound Cu-Co deposits hosted by sedimentary rocks and lateritic Ni-Co deposits, of which the former two types are the most important. There are six principal metallogenic epochs and seven important metallogenic belts according to their distribution and tectonic position. Although cobalt generally occurs in nickel-copper, copper and iron deposits as an associated metal, great developments in exploration for independent cobalt deposits have happened in China, and, in recent years, many independent deposits with different elementary assemblages and different genetic types have been discovered in the eastern part of the northern margin of the North China platform, the Central Orogenic Belt of China, western Jiangxi and northeastern Hun  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

13.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

14.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

15.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

17.
  相似文献   

18.
《Applied Geochemistry》2001,16(2):137-159
Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km2 area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population).  相似文献   

19.
岩石密度和超高压岩石折返速率   总被引：1，自引：3，他引：1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

20.
We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al2O3-SiO2 ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号