共查询到20条相似文献，搜索用时 125 毫秒
1.
Two or more different fluids generally saturate chalk in oil reservoir, and therefore its behaviour can be very complicated. In this paper, a constitutive law is proposed for modelling the mechanical behaviour of a chalk saturated by two non‐miscible fluids, water and oil. The effects of the capillary pressure or suction are taken into account. They are considered as an independent variable, as in the Barcelona's basic model developed for unsaturated soils. On the other hand, internal friction and pore collapse are modelled as independent mechanisms. The determination of the parameters is based on triaxial and oedometer tests. Finally, in order to validate the model, predictions are compared with experimental results of water‐flooding test. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
2.
The Barcelona basic model cannot predict the mechanical behaviour of unsaturated expansive soils, whereas the Barcelona expansive model (BExM) can only predict the stress–strain behaviour of unsaturated expansive soils without the water‐retention behaviour being incorporated. Moreover, the micro‐parameters and the coupling function between micro‐structural and macro‐structural strains in the BExM are difficult to determine. Experimental data show that the compression curves for non‐expansive soils under constant suctions are shifted towards higher void ratios with increasing suction, whereas the opposite is true for expansive soils. According to the observed water‐retention behaviour of unsaturated expansive soils, the air‐entry value increases with density, and the relationship between the degree of saturation and void ratio is linear at constant suction. According to the above observation, an elastoplastic constitutive model is developed for predicting the hydraulic and mechanical behaviour of unsaturated expansive soils, based on the existing hydro‐mechanical model for non‐expansive unsaturated soil. The model takes into consideration the effect of degree of saturation on the mechanical behaviour and that of void ratio on the water‐retention behaviour. The concept of equivalent void ratio curve is introduced to distinguish the plastic potential curve from the yield curve. The model predictions are compared with the test results of an unsaturated expansive soil, including swelling tests under constant net stress, isotropic compression tests and triaxial shear tests under constant suction. The comparison indicates that the model offers great potential for quantitatively predicting the hydraulic and mechanical behaviour of unsaturated expansive soils. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
3.
The interparticle bonding effect due to water menisci plays an important role in the hydromechanical coupling properties of unsaturated soils. This paper presents an unsaturated hydromechanical coupling model that considers the influence of matric suction, degree of saturation, and microscopic pore structure on the interparticle bonding effect. The enhanced effective stress and bonding variable are selected as constitutive variables. The bonding variable is correlated with the ratio between unsaturated void ratio and saturated void ratio. The deformation characteristics of unsaturated soils are described based on the bounding surface plasticity theory. A soil–water characteristic model that considers deformation and hydraulic hysteresis is integrated into the constitutive model to achieve hydromechanical coupling. The proposed model can effectively describe the hydromechanical coupling characteristics and the meniscus bonding force of unsaturated bimodal structure soils; the model parameters can be easily obtained through routine experiments. The experimental results of unsaturated isotropic compression, the wetting/drying cycle, and unsaturated triaxial shear tests are used to validate the capability of the proposed model.
相似文献4.
非饱和土的本构模型研究 总被引：1，自引：0，他引：1
引用平均土骨架应力的概念,研究推导出非饱和土的刚度参数随吸力变化而变化的关系式,进而推导得到用平均土骨架应力表述的非饱和土LC屈服面函数以及硬化规律。从土力学原理推导,得到土样由于在净应力和吸力作用下产生体积变形引起土样饱和度变化的关系式。由平均土骨架应力推广,得到三轴应力状态的椭圆屈服函数,这一非饱和土本构模型的优点在于考虑了应力作用后土样饱和度的变化,通过对已有试验数据的初步验证,表明提出的非饱和土本构模型的合理性和适用性。 相似文献
5.
Mahnoosh Biglari Claudio Mancuso Anna d’Onofrio Mohammad Kazem Jafari Ali Shafiee 《Computers and Geotechnics》2011
Existing models for predicting the small strain behaviour of unsaturated soil are not capable of predicting the initial shear stiffness during suction reduction under normally consolidated conditions. This problem has been addressed in the present study by combining an existing elastoplastic model and recent experimental data to provide a new model for the initial shear stiffness. The model, which is similar to that typically adopted for saturated soils, uses the average skeleton stress and an additional function of the degree of saturation. This new model not only captures the behaviour of the new experimental results, but it also describes a unique relationship between saturated and unsaturated soils. 相似文献
6.
以饱和度与有效应力为状态变量,通过引入描述不饱和与饱和土孔隙比差的状态变量,将Zhang等提出的饱和土体应力诱导各向异性动弹塑性本构模型推广到不饱和土体中,使其可描述不饱和土在动力循环荷载作用下的力学特性行为。通过对已有不饱和土体在完全不排水条件下的动三轴试验进行理论模拟,验证了所提出不饱和土本构模型的正确性。最后基于所提出本构模型,讨论了在不排水条件下初始饱和度对不饱和土动力特性研究。结果表明,不饱和土在动力荷载作用下,土体的孔隙比将减少,导致饱和度增加;当初始饱和度较高时,不饱和土会转化为饱和土,从而发生液化现象。该研究成果对研究不饱和土在地震等动力荷载作用下的力学特性行为具有重要意义。 相似文献
7.
Most existing hydromechanical models for unsaturated soils are not able to fully capture the nonlinearity of stress–strain curves at small strains (less than 1%). They cannot therefore, for example, accurately predict ground movements and the performance of many earth structures under working conditions. To tackle this problem, a state‐dependent bounding surface plasticity model has been newly developed. Particularly, the degradation of shear modulus with strain at small strains ranging from 0.001% to 1% is focused. The proposed model is formulated in terms of mean average skeleton stress, deviator stress, suction, specific volume and degree of saturation. Void ratio‐dependent hydraulic hysteresis is coupled with the stress–strain behaviour. Different from other elastoplastic models for unsaturated soils, plastic strains are allowed inside bounding surfaces. In this paper, details of model formulations and calibration procedures of model parameters are presented. To evaluate the capability of the new model, it is applied to simulate a series of triaxial compression tests on compacted unsaturated silt at various suctions. Effects of suction, drying and wetting as well as net stress on unsaturated soil behaviour are well captured. The model shows good predictions of the degradation of shear modulus with strain over a wide range of strains from 0.001% to 1%. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
8.
Scaly clays are stiff and highly fissured clays often used as construction materials. This paper presents the results of triaxial compression tests carried out on saturated and unsaturated samples of a compacted scaly clay. Complementary investigation on the microstructural features and their evolution with the amount of water stored into the material are also presented in order to shed light on the evolution of the micro- and macroporosity with suction. The water retention behaviour of the compacted scaly clay is also addressed. The results from the controlled suction triaxial tests are used to discuss the applicability of a single-shear strength criterion to compacted double-structured clays when the effective stress concept for unsaturated soils is used. The choice of the degree of saturation to be included in the effective stress definition for obtaining a satisfactory representation of the shear strength is addressed. It is shown that the best results are obtained when the macropore degree of saturation is considered along with its evolution during the applied stress path. 相似文献
9.
Effect of degree of saturation on mechanical behaviour of unsaturated soils and its elastoplastic simulation 总被引：1，自引：0，他引：1
The two stress-state variable approach has been widely used in interpreting unsaturated soil behaviour. However this approach cannot take into account the effect of degree of saturation or water contents on the stress–strain behaviour and strength of unsaturated soils. The triaxial test results presented in this paper show that even if the same path of net stress and suction is followed, the stress–strain relation and strength are different due to different degrees of saturation. When other conditions are the same, the higher the degree of saturation for the soil sample is, the higher the stress ratio corresponding to a given axial strain will be. This effect can be modeled by using an elasto-plastic constitutive model coupling hydraulic and mechanical behaviour of unsaturated soils. Comparisons between the predicted and measured results are presented, which demonstrate that the model can quantitatively simulate the influence of the degree of saturation on stress–strain behaviour and strength of unsaturated soils. 相似文献
10.
The study of the temperature effects on the behaviour of saturated and unsaturated soils on triaxial paths requires the development of a new triaxial experimental device of 3.5 MPa of confining pressure and equipped with a heating collar-controlled temperature. In addition to this case of the unsaturated soils, a special pedestal is developed, so as to impose suctions up to 9 MPa using an osmotic solution of polyethylene glycol (PEG) 6000 through a permeable semi-membrane. Measurements of the degree of saturation and the variation of volume during tests induce various problems, primarily related to the thermal dilation of the osmotic solution and the cell-water system. These problems have been solved by carrying out a preliminary calibration. The applicability of this new apparatus concerns environmental geotechnics and geological engineering such as the design and behaviour of engineered barriers as well as the behaviour of the receiving layers of storage sites like radioactive waste. 相似文献
11.
Xiong Yong-lin Ye Guan-lin Xie Yi Ye Bin Zhang Sheng Zhang Feng 《Acta Geotechnica》2019,14(2):313-328
This study presents a sophisticated elastoplastic constitutive model for unsaturated soil using Bishop-type skeleton stress and degree of saturation as state variables in the framework of critical state soil mechanism. The model is proposed in order to describe the coupled hydromechanical behavior of unsaturated soil irrespective of what kind of the loadings or the drainage conditions may be. At the same time, a water retention characteristic curve considering the influence of deformation on degree of saturation is also proposed. In the model, the superloading and subloading concepts are introduced to consider the influences of overconsolidation and structure on deformation and strength of soils. The proposed model only employs nine parameters, among which five parameters are the same as those used in Cam-Clay model. The other four parameters have the clear physical meanings and can be easily determined by conventional soil tests. The capability and accuracy of the proposed model have been validated carefully through a series of laboratory tests such as isotropic loading tests and triaxial monotonic and cyclic compression tests under different mechanical and hydraulic conditions.
相似文献12.
13.
Matthieu Dumont Said Taibi Jean-Marie Fleureau Nabil Abou Bekr Abdelghani Saouab 《Comptes Rendus Geoscience》2010,342(12):892-900
A simple thermohydromechanical (THM) constitutive model for unsaturated soils is described. The effective stress concept is extended to unsaturated soils with the introduction of a capillary stress. This capillary stress is based on a microstructural model and calculated from attraction forces due to water menisci. The effect of desaturation and the thermal softening phenomenon are modelled with a minimal number of material parameters and based on existing models. THM process is qualitatively and quantitatively modelled by using experimental data and previous work to show the application of the model, including a drying path under mechanical stress with transition between saturated and unsaturated states, a heating path under constant suction and a deviatoric path with imposed suction and temperature. The results show that the present model can simulate the THM behaviour in unsaturated soils in a satisfactory way. 相似文献
14.
The paper presents a new single-surface elasto-plastic model for unsaturated cemented soils, formulated within the critical state soil mechanics framework, which should be considered as an extension to unsaturated conditions of a recently proposed constitutive law for saturated structured soils. The model has been developed with the main purpose of inspecting the mechanical instabilities induced in natural soils by bond degradation resulting from the accumulation of plastic strains and/or the changes in pore saturation. At this scope, the constitutive equations are used to simulate typical geotechnical testing conditions, whose results are then analysed in light of the controllability theory. The results of triaxial tests on an ideal fully saturated cemented soil and on the corresponding unsaturated uncemented one are first discussed, aiming at detecting the evidence of potentially unstable conditions throughout the numerical simulations. This is followed by similar analyses considering the combined effects of both the above features. For each analysed case, a simple analytical stability criterion is proposed and validated against the numerical results, generalizing the results, and highlighting the crucial role of state variables and model parameters on the possible occurrence of failure conditions.
相似文献15.
This paper presents a three‐dimensional elastoplastic constitutive model for predicting the hydraulic and mechanical behaviour of unsaturated soils. It is based on experimental results obtained from a series of controlled‐suction triaxial tests on unsaturated compacted clay with different initial densities. Hydraulic hysteresis in the water‐retention behaviour is modelled as an elastoplastic process, with the elastic part modelled by a series of scanning curves and the elastoplastic part modelled by the main drying and wetting curves. The effect of void ratio on the water‐retention behaviour is studied using data obtained from controlled‐suction wetting–drying cyclic tests on unsaturated compacted clay with different initial densities. The effect of the degree of saturation on the stress–strain‐strength behaviour and the effect of void ratio on the water‐retention behaviour are considered in the model, as is the effect of suction on the hydraulic and mechanical behaviour. The initial density dependency of the compacted soil behaviour is modelled by experimental relationships between the initial density and the corresponding yield stress and, thereby, between the initial density and the normal compression line. The model is generalized to three‐dimensional stress states by assuming that the shapes of the failure and yield surfaces in the deviatoric stress plane are given by the Matsuoka–Nakai criterion. Model predictions of the stress–strain and water‐retention behaviour are compared with those obtained from triaxial tests with different initial densities under isotropic compression, triaxial compression and triaxial extension, with or without variation in suction. The comparisons indicate that the model accurately predicts the hydraulic and mechanical behaviour of unsaturated compacted soils with different initial densities using the same material constant. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
16.
Matthieu Dumont Said Taibi Jean‐Marie Fleureau Nabil Abou‐Bekr Abdelghani Saouab 《国际地质力学数值与分析法杂志》2011,35(12):1299-1317
A simple thermo‐hydro‐mechanical (THM) constitutive model for unsaturated soils is described. The effective stress concept is extended to unsaturated soils with the introduction of a capillary stress. This capillary stress is based on a microstructural model and calculated from attraction forces due to water menisci. The effect of desaturation and the thermal softening phenomenon are modelled with a minimal number of material parameters and based on existing models. THM process is qualitatively and quantitatively modelled by using experimental data and previous work to show the application of the model, including a drying path under mechanical stress with transition between saturated and unsaturated states, a heating path under constant suction and a deviatoric path with imposed suction and temperature. The results show that the present model can simulate the THM behaviour in unsaturated soils in a satisfactory way. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
17.
18.
Constitutive models for unsaturated soils are most commonly based on conventional critical state type models for saturated soils. The ellipse of the modified Cam-clay model is usually adopted for the formulation of the yield and the plastic potential surfaces in the mean stress – deviatoric stress plane. Despite the wide use of this ellipse it has long been shown that the peak deviatoric stress observed for highly overconsolidated states may be largely overestimated. For fully saturated conditions, a planar surface, termed the Hvorslev surface, has been employed in the literature in order to overcome this shortcoming on the dry side of the critical state. In addition, by employing a no-tension cut-off, stress states are restricted within the compressive region. In unsaturated conditions and due to the effect of suction the soil may be subjected to tensile total stresses which should not, however, exceed a model dependent limit. Nonetheless, adopting a planar surface and in the absence of any provision, illegal tensile stresses may be obtainable. For this reason, a new expression for the Hvorslev surface, which restricts the stress state within acceptable boundaries, is proposed, based on a small number of model parameters. The new surface is curved rather than planar and can also be used in combination with critical state type constitutive models developed for saturated conditions. The new surface is calibrated based on fully saturated undrained triaxial compression and extension tests and on unsaturated drained triaxial tests. The superiority of the new surface in comparison with commonly adopted shapes for the yield and the plastic potential functions – such as the ellipse and the bullet shape of the modified and the original Cam clay models – is demonstrated through numerical analyses of the unsaturated drained triaxial laboratory tests. 相似文献
19.
《Engineering Geology》2007,89(1-2):144-154
This paper presents the results of an experimental investigation carried out to study thermally induced volume changes under drained heating condition and thermally induced excess pore water pressures under undrained heating condition of soft Bangkok clay. The clay was heated up from room temperature (25 °C) to 90 °C using a modified oedometer and a triaxial test apparatus, respectively. The clay was found to exhibit temperature induced volume changes and temperature induced excess pore water pressures, in the range of temperatures investigated, depending mainly on the stress history. A theoretical microstructure mechanism that can interpret the thermally induced volume change behaviour at different stress conditions is presented in this study. Furthermore, the thermally induced excess pore water pressure behaviour at different stress conditions is explained using the unloading–reloading hysteresis of the typical soil consolidation curve. The results of this study provide additional data that can enhance the understanding of the thermo-mechanical behaviour concepts of saturated clays. 相似文献
20.
为描述非饱和土的应力-应变特性,基于非饱和土三轴剪切试验,提出泊松比变化率（即切线泊松比随轴向应变的变化速率）的概念,发现非饱和土的切线模量和泊松比变化率均随轴向应变的增加呈指数衰减规律,基于此提出了一种描述非饱和土应力-应变关系的新非线性模型。该模型不仅能描述应变硬化,而且能描述应变软化;能对非饱和土三轴不固结不排水剪、固结排水剪、固结不排水剪试验的应力-应变关系进行描述;模型共包含6个参数,物理意义明确,确定方法简便。利用提出的模型对国内外文献中的三轴试验进行了模拟,结果表明,模拟结果与试验数据有很好的吻合度,从而验证了模型对试验数据的合理性和适用性。 相似文献