首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 578 毫秒
1.
Redox processes of structural Fe in clay minerals play an important role in biogeochemical cycles and for the dynamics of contaminant transformation in soils and aquifers. Reactions of Fe(II)/Fe(III) in clay minerals depend on a variety of mineralogical and environmental factors, which make the assessment of Fe redox reactivity challenging. Here, we use middle and near infrared (IR) spectroscopy to identify reactive structural Fe(II) arrangements in four smectites that differ in total Fe content, octahedral cationic composition, location of the negative excess charge, and configuration of octahedral hydroxyl groups. Additionally, we investigated the mineral properties responsible for the reversibility of structural alterations during Fe reduction and re-oxidation. For Wyoming montmorillonite (SWy-2), a smectite of low structural Fe content (2.8 wt%), we identified octahedral AlFe(II)-OH as the only reactive Fe(II) species, while high structural Fe content (>12 wt%) was prerequisite for the formation of multiple Fe(II)-entities (dioctahedral AlFe(II)-OH, MgFe(II)-OH, Fe(II)Fe(II)-OH, and trioctahedral Fe(II)Fe(II)Fe(II)-OH) in iron-rich smectites Ölberg montmorillonite, and ferruginous smectite (SWa-1), as well as in synthetic nontronite. Depending on the overall cationic composition and the location of excess charge, different reactive Fe(II) species formed during Fe reduction in iron-rich smectites, including tetrahedral Fe(II) groups in synthetic nontronite. Trioctahedral Fe(II) domains were found in tetrahedrally charged ferruginous smectite and synthetic nontronite in their reduced state while these Fe(II) entities were absent in Ölberg montmorillonite, which exhibits an octahedral layer charge. Fe(III) reduction in iron-rich smectites was accompanied by intense dehydroxylation and structural rearrangements, which were only partially reversible through re-oxidation. Re-oxidation of Wyoming montmorillonite, in contrast, restored the original mineral structure. Fe(II) oxidation experiments with nitroaromatic compounds as reactive probes were used to link our spectroscopic evidence to the apparent reactivity of structural Fe(II) in a generalized kinetic model, which takes into account the presence of Fe(II) entities of distinctly different reactivity as well as the dynamics of Fe(II) rearrangements.  相似文献   

2.
It is envisaged that high-level nuclear waste (HLW) will be disposed of in underground repositories. Many proposed repository designs include steel waste canisters and bentonite backfill. Natural analogues and experimental data indicate that the montmorillonite component of the backfill could react with steel corrosion products to produce non-swelling Fe-rich phyllosilicates such as chamosite, berthierine, or Fe-rich smectite. In K-bearing systems, the alteration of montmorillonite to illite/glauconite could also be envisaged. If montmorillonite were altered to non-swelling minerals, the swelling capacity and self-healing properties of the bentonite backfill could be reduced, thereby diminishing backfill performance. The main aim of this paper was to investigate Fe-rich phyllosilicate mineral stability at the canister-backfill interface using thermodynamic modelling. Estimates of thermodynamic properties were made for Fe-rich clay minerals in order to construct approximate phase-relations for end-member/simplified mineral compositions in logarithmic activity space. Logarithmic activity diagrams (for the system Al2O3-FeO-Fe2O3-MgO-Na2O-SiO2-H2O) suggest that if pore waters are supersaturated with respect to magnetite in HLW repositories, Fe(II)-rich saponite is the most likely montmorillonite alteration product (if fO2(g) values are significantly lower than magnetite-hematite equilibrium). Therefore, the alteration of montmorillonite may not be detrimental to nuclear waste repositories that include Fe, as long as the swelling behaviour of the Fe-rich smectite produced is maintained. If fO2(g) exceeds magnetite-hematite equilibrium, and solutions are saturated with respect to magnetite in HLW repositories, berthierine is likely to be more stable than smectite minerals. The alteration of montmorillonite to berthierine could be detrimental to the performance of HLW repositories.  相似文献   

3.
Several designs proposed for high-level nuclear waste (HLW) repositories include steel waste canisters surrounded by montmorillonite clay. This work investigates montmorillonite stability in the presence of native Fe, magnetite and aqueous solutions under hydrothermal conditions. Two series of experiments were conducted. In the first, mixtures of Na-montmorillonite, magnetite, native Fe, calcite, and NaCl solutions were reacted at 250 °C, Psat for between 93 and 114 days. In the second series, the starting mixtures included Na-montmorillonite, native Fe and solutions of FeCl2 which were reacted at temperatures of 80, 150, and 250 °C, Psat, for 90-92 days. Experiments were analysed using XRD, FT-IR, TEM, ICP-AES, and ICP-MS. In the first series of experiments, native Fe oxidised to produce magnetite and the starting montmorillonite material was transformed to Fe-rich smectite only when the Fe was added predominantly as Fe metal rather than Fe oxide (magnetite). The Fe-rich smectite was initially Fe(II)-rich, which oxidised to produce an Fe(III)-rich form on exposure to air. The expansion of this material on ethylene glycol solvation was much reduced compared to the montmorillonite starting material. TEM imaging shows that partial loss of tetrahedral sheets occurred during transformation of the montmorillonite, resulting in adjacent layers becoming H-bonded with a 7 Å repeat. The reduced swelling property of the Fe-smectite product may be due predominantly to the structural disruption of smectite layers and the formation of H-bonds. Solute activities corresponded to the approximate stability field calculated for hypothetical Fe(II)-saponite. In the second series of experiments, significant smectite alteration was only observed at 250 °C and the product contained a small proportion of a 7 Å repeat structure, observable by XRD. In these experiments, solute activities coincide with berthierine. The experiments indicate that although bentonite is still a desirable choice of backfill material for HLW repositories, some loss of expandability may result if montmorillonite is altered to Fe-rich smectite at the interface between steel canisters and bentonite.  相似文献   

4.
99Technetium (99Tc) is a fission product of uranium-235 and plutonium-239 and poses a high environmental hazard due to its long half-life (t1/2 = 2.13 × 105 y), abundance in nuclear wastes, and environmental mobility under oxidizing conditions [i.e., Tc(VII)]. Under reducing conditions, Tc(VII) can be reduced to insoluble Tc(IV). Ferrous iron, either in aqueous form (Fe2+) or in mineral form [Fe(II)], has been used to reduce Tc(VII) to Tc(IV). However, the reactivity of Fe(II) from clay minerals, other than nontronite, toward immobilization of Tc(VII) and its role in retention of reduced Tc(IV) has not been investigated. In this study the reactivity of a suite of clay minerals toward Tc(VII) reduction and immobilization was evaluated. The clay minerals chosen for this study included five members in the smectite-illite (S-I) series, (montmorillonite, nontronite, rectorite, mixed layered I-S, and illite), chlorite, and palygorskite. Surface Fe-oxides were removed from these minerals with a modified dithionite-citrate-bicarbonate (DCB) procedure. The total structural Fe content of these clay minerals, after surface Fe-oxide removal, ranged from 0.7% to 30.4% by weight, and the structural Fe(III)/Fe(total) ratio ranged from 45% to 98%. X-ray diffraction (XRD) and Mössbauer spectroscopy results showed that after Fe oxide removal the clay minerals were free of Fe-oxides. Scanning electron microscopy (SEM) revealed that little dissolution occurred during the DCB treatment. Bioreduction experiments were performed in bicarbonate buffer (pH-7) with structural Fe(III) in the clay minerals as the sole electron acceptor, lactate as the sole electron donor, and Shewanella putrefaciens CN32 cells as a mediator. In select tubes, anthraquinone-2,6-disulfate (AQDS) was added as electron shuttle to facilitate electron transfer. In the S-I series, smectite (montmorillonite) was the most reducible (18% and 41% without and with AQDS, respectively) and illite the least (1% for both without and with AQDS). The extent and initial rate of bioreduction were positively correlated with the percent smectite in the S-I series (i.e., layer expandability). Fe(II) in the bioreduced clay minerals subsequently was used to reduce Tc(VII) to Tc(IV) in PIPES buffer. Similar to the trend of bioreduction, in the S-I series, reduced NAu-2 showed the highest reactivity toward Tc(VII), and reduced illite exhibited the least. The initial rate of Tc(VII) reduction, after normalization to clay and Fe(II) concentrations, was positively correlated with the percent smectite in the S-I series. Fe(II) in chlorite and palygorskite was also reactive toward Tc(VII) reduction. These data demonstrate that crystal chemical parameters (layer expandability, Fe and Fe(II) contents, and surface area, etc.) play important roles in controlling the extent and rate of bioreduction and the reactivity toward Tc(VII) reduction. Reduced Tc(IV) resides within clay mineral matrix, and this association could minimize any potential of reoxidation over long term.  相似文献   

5.
Reduction of octahedral Fe in the crystalline structure of smectites influences, possibly controls, surface-sensitive physical and chemical properties. The purpose of this study was to investigate if reduction of structural Fe by Na-dithionite or bacteria affects the chemical environment of constituent cations in montmorillonite, employing solid state multinuclear (29Si and 27Al) magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy. Reduction of structural Fe resulted in a positive (down field) chemical shift of the main Si Q3 (Q3(0Al)) site which was strongly correlated with Fe(II) content and inferred that distortions in Si-OT (T=Si, Al) bond angles and Si-O bond lengths occur with increasing layer charge. The line width (W) of the 29Si Q3 signal also increased with increasing levels of reduction. No change occurred in the position of the peak maximum for the octahedral Al (27AlVI) signal; however, an increased W was observed for this peak with increasing Fe(II) content. These results are attributed to decreases in Si-O-T bond angles and Si-O bond distances, corresponding to a better fit between the tetrahedral and octahedral sheets brought about by the presence of Fe(II) in the clay structure. The increased 27AlVI signal width (W) may also be due to a lessening of the paramagnetic influence of Fe(III) nuclei and enhancement of 27AlVI signals with different quadrupole coupling constants (QCC). Multinuclear MAS NMR analyses of dithioniteand microbially-reduced montmorillonite indicate that reduction of structural Fe caused reversible changes in the smectite structure, at least as far as this method could discern.  相似文献   

6.
The magnetic behaviour and Curie temperatures (T C ) of spinelloids and spinels in the Fe3O4–Fe2SiO4 and Fe3O4–(Mg,Fe)2SiO4 systems have been determined from magnetic susceptibility (k) measurements in the temperature range –192 to 700 °C. Spinelloid II is ferrimagnetic at room temperature and the k measurements display a characteristic asymmetric hump before reaching a T C at 190 °C. Spinelloid V from the Mg-free system is paramagnetic at room temperature and hysteresis loops at various low temperatures indicate a ferri- to superparamagnetic transition before reaching the T C . The T C shows a non-linear variation with composition between –50 and –183 °C with decreasing magnetite component (X Fe3O4). The substitution of Mg in spinelloid V further decreases T C . Spinelloid III is paramagnetic over nearly the total temperature range. Ferrimagnetic models for spinelloid II and spinelloid V are proposed. The T C of Fe3O4–Fe2SiO4 spinel solid solutions gradually decrease with increasing Si content. Spinel is ferrimagnetic at least to a composition of X Fe3O4=0.20, constraining a ferrimagnetic to antiferromagnetic transition to occur at a composition of X Fe3O4<0.20. A contribution of the studied ferrimagnetic phases for crustal anomalies on the Earth can be excluded because they lose their magnetization at relatively low temperatures. However, their relevance for magnetic anomalies on other planets (Mars?), where these high-pressure Fe-rich minerals could survive their exhumation or were formed by impacts, has to be considered.  相似文献   

7.
The results of thermochemical studies are reported for nontronite samples from the Pinares-de-Majari (Eastern Cuba) (Sample I) and Kempirsai serpentine massif (South Urals, Kazakhstan) (Sample II). The enthalpies of formation of dehydrated hydroxyl-bearing nontronites from elements were determined by melt dissolution calorimetry using high-temperature heat-flux Tiana-Calvet microcalorimeter: Δ f H el o (298.15 K): ?4958 ± 13 kJ/mol for Mg0.4(Fe 1.5 3+ Mg0.4Ni0.1)[Si3.7Al0.3O10](OH)2 (I) and ?5003.6 ± 8.0 kJ/mol for Mg0.3Na0.1Ca0.1(Fe 1.4 3+ Mg0.5Ni0.1)[Si3.7Al0.3O10](OH)2 (II). It was determined experimentally that the enthalpy of dehydration (removal of molecular adsorption and interlayer water) of the studied nontronites is 6 ± 2 kJ per 1 mole H2O. The enthalpy of formation of nontronite of theoretical composition Mg0.15Fe 2 3+ [Si3.7Al0.3]O10(OH)2 was estimated at ?4750 kJ/mol. The Gibbs free energies of formation of the nontronites were calculated.  相似文献   

8.
A quantitative study was performed to understand how Fe(III) site occupancy controls Fe(III) bioreduction in nontronite by Shewanella putrefaciens CN32. NAu-1 and NAu-2 were nontronites and contained Fe(III) in different structural sites with 16 and 23% total iron (w/w), respectively, with almost all iron as Fe(III). Mössbauer spectroscopy showed that Fe(III) was present in the octahedral site in NAu-1 (with a small amount of goethite), but in both the tetrahedral and the octahedral sites in NAu-2. Mössbauer data further showed that the octahedral Fe(III) in NAu-2 existed in at least two environments- trans (M1) and cis (M2) sites. The microbial Fe(III) reduction in NAu-1 and NAu-2 was studied in batch cultures at a nontronite concentration of 5 mg/mL in bicarbonate buffer with lactate as the electron donor. The unreduced and bioreduced nontronites were characterized by X-ray diffraction (XRD), Mössbauer spectroscopy, and transmission electron microscopy (TEM). In the presence of an electron shuttle, anthraquinone-2,6-disulfonate (AQDS), the extent of bioreduction was 11%-16% for NAu-1 but 28%-32% for NAu-2. The extent of reduction in the absence of AQDS was only 5%-7% for NAu-1 but 14%-18% for NAu-2. The control experiments with heat killed cells and without cells did not show any appreciable reduction (<2%). The extent of reduction in experiments performed with a dialysis membrane to separate cells from clays (without AQDS) was 2%-3% for NAu-1 but 5%-7% for NAu-2, suggesting that cells probably released an electron shuttling compound and/or Fe(III) chelator. The reduction rate was also faster in NAu-2 than that in NAu-1. Mössbauer data of the bioreduced nontronite materials indicated that the Fe(III) reduction in NAu-1 was mostly from the presence of goethite, whereas the reduction in NAu-2 was due to the presence of the tetrahedral and trans-octahedral Fe(III) in the structure. The measured aqueous Fe(II) was negligible. As a result of bioreduction, the average nontronite particle thickness remained nearly the same (from 2.1 to 2.5 nm) for NAu-1, but decreased significantly from 6 to 3.5 nm for NAu-2 with a concomitant change in crystal size distribution. The decrease in crystal size suggests reductive dissolution of nontronite NAu-2, which was supported by aqueous solution chemistry (i.e., aqueous Si). These data suggest that the more extensive Fe(III) bioreduction in NAu-2 was due to the presence of the tetrahedral and the trans-octahedral Fe(III), which was presumed to be more reducible. The biogenic Fe(II) was not associated with biogenic solids or in the aqueous solution. We infer that it may be either adsorbed onto surfaces of nontronite particles/bacteria or in the structure of nontronite. Furthermore, we have demonstrated that natural nontronite clays were capable of supporting cell growth even in medium without added nutrients, possibly due to presence of naturally existing nutrients in the nontronite clays. These results suggest that crystal chemical environment of Fe(III) is an important determinant in controlling the rate and extent of microbial reduction of Fe(III) in nontronite.  相似文献   

9.
The detection of phyllosilicates and sulfates on Mars has revealed a complex aqueous history which suggests distinct geochemical environments separated temporally and spatially. Recent observations by MRO CRISM in Mawrth Vallis have shown that phyllosilicate deposits exhibit a specific stratigraphy, which remains incompletely understood. Moreover, MER Spirit has evidenced association between phyllosilicates, amorphous silica and sulfates. We investigated the hypothesis that these parageneses resulted from the acidic weathering of older phyllosilicate deposits. We exposed nontronite (Fe-rich smectite), montmorillonite (Al-rich smectite) and kaolinite to H2SO4 solutions at pH 0, 2 and 4, and at a temperature of 60 °C. After the acid treatment, a combination of mineralogical techniques was used to assess the degree of alteration of the three phyllosilicate minerals. XRF, XRD and ESEM measurements show that nontronite was the most unstable when acid leached, followed by montmorillonite and then kaolinite. Progressive acidic leaching of nontronite leads to alteration of the phyllosilicate to amorphous silica, along with Fe-sulfate and anatase, and the formation of an acidic Al,Fe-rich solution. Alteration of montmorillonite resulted in the formation of Fe-, Al-, Ca- and Mg-sulfates, and a Al-rich leaching solution. Comparatively, leaching of kaolinite resulted in the formation of Al-sulfates and a Al-rich solution as well, with only slight alteration of the primary mineralogical features. The effects of acid leaching of the phyllosilicates were also observed in NIR reflectance spectra, allowing a comparison with CRISM spectra from Mawrth Vallis. Based on our results, we propose a new model where acid leaching of mixed phyllosilicate deposits leads to kaolinite overlaying montmorillonite, which in turn caps Fe,Mg-smectites. Leaching of cations and subsequent evaporation leads to sulfate deposits, as supported by geochemical modeling, while amorphous silica remains as a residue. Depending on the intensity (pH) and length of exposure of acidic leaching, our model can explain the stratigraphic distribution of phyllosilicates, and the association of sulfates, silica and smectites.  相似文献   

10.
On heating the paramagnetic clay mineral nontronite for ≈ 30 h at 970 °C in air, a new ferrimagnetic phase forms which was studied by magnetic techniques, microprobe analysis, x-ray diffraction and Mössbauer spectroscopy. The new phase has a Curie temperature T c ≈ 240°C and high magnetic anisotropy at room temperature with a spontaneous magnetization >12 Am2/kg. Semiquantitative microprobe analyses show Fe to be the dominating consistuent. X-ray analysis points to a lattice which may be similar to that of ?-Fe2O3 but differs from it in detail. 57Fe Mössbauer spectra, taken between 78 K and 295 °C, can be deconvoluted into three sextet subpatterns in the ferrimagnetic region which are well resolved at room temperature and exhibit a rather small line width. Above T c, a doublet is visible which is typical for Fe3+ ions.  相似文献   

11.
Clay minerals and methanogens are ubiquitous and co-exist in anoxic environments, yet it is unclear whether methanogens are able to reduce structural Fe(III) in clay minerals. In this study, the ability of methanogen Methanosarcina barkeri to reduce structural Fe(III) in iron-rich smectite (nontronite NAu-2) and the relationship between iron reduction and methanogenesis were investigated. Bioreduction experiments were conducted in growth medium using three types of substrate: H2/CO2, methanol, and acetate. Time course methane production and hydrogen consumption were measured by gas chromatography. M. barkeri was able to reduce structural Fe(III) in NAu-2 with H2/CO2 and methanol as substrate, but not with acetate. The extent of bioreduction, as measured by the 1,10-phenanthroline method, was 7-13% with H2/CO2 as substrate, depending on nontronite concentration (5-10 g/L). The extent was higher when methanol was used as a substrate, reaching 25-33%. Methanogenesis was inhibited by Fe(III) reduction in the H2/CO2 culture, but enhanced when methanol was used. High charge smectite and biogenic silica formed as a result of bioreduction. Our results suggest that methanogens may play an important role in biogeochemical cycling of iron in clay minerals and may have important implications for the global methane budget.  相似文献   

12.
Mössbauer spectra of glauconite and nontronite recorded at temperatures down to 1.3K and in applied fields up to 4.5 T show that Fe III spin configurations are respectively ferromagnetic and antiferromagnetic. It is shown that in a particular material depending on the distribution and concentration of Fe III in the silicate sheet either mode might occur. A new model of competing nearest-neighbour (J 1) and next-nearest-neighbour (J 2) magnetic exchange interactions in the triangular lattice is introduced to account for the results. From available magnetic susceptibilities we estimate ∣J 1∣～6∣J 2∣. The results lead to the conclusion that the Fe III cations are highly ordered in glauconite and occupy cis sites so as to maximize their mutual separations.  相似文献   

13.
Clay minerals are ubiquitous on epigeosphere, especially in soils and sediments where microbes thrive. The clay-microbe interactions are common in these geological media and greatly contribute to accelerating the mineral transformation process, e.g. the illitization of nontronite (a Fe-rich smectite) catalyzed by microbes under anoxic atmosphere in 2 weeks. However, few has considered montmorillonite, a Fe-poor smectite more typical in natural environments than nontronite. This study therefore focuses on the interaction between montmorillonite and bacteria under conditions relevant to those in natural soils and sediments.  相似文献   

14.
Mössbauer spectroscopy was applied to characterize the valence states Fe(II) and Fe(III) in sedimentary minerals from a core of the Peru Basin. The procedure in unraveling this information includes temperature-dependent measurements from 275?K to very low temperature (300?mK) in zero–field and also at 4.2?K in an applied field (up to 6.2?T) and by mathematical procedures (least-squares fits and spectral simulations) in order to resolve individual spectral components. The depth distribution of the amount of Fe(II) is about 11% of the total Fe to a depth of 19?cm with a subsequent steep increase (within 3?cm) to about 37%, after which it remains constant to the lower end of the sediment core (at about 40?cm). The steep increase of the amount of Fe(II) defines a redox boundary which coincides with the position where the tan/green color transition of the sediment occurs. The isomer shifts and quadrupole splittings of Fe(II) and Fe(III) in the sediment are consistent with hexacoordination by oxygen or hydroxide ligands as in oxide and silicate minerals. Goethite and traces of hematite are observed only above the redox boundary, with a linear gradient extending from about 20% of the total Fe close to the sediment surface to about zero at the redox boundary. The superparamagnetic relaxation behavior allows to estimate the order of magnitude for the size of the largest goethite and hematite particles within the particle-site distribution, e.g. ～170?Å and ～50?Å, respectively. The composition of the sediment spectra recorded at 300?mK in zero-field, apart from the contributions due to goethite and hematite, resembles that of the sheet silicates smectite, illite and chlorite, which have been identified as major constituents of the sediment in the <2?μm fraction by X-ray diffraction. The specific “ferromagnetic” type of magnetic ordering in the sediment, as detected at 4.2?K in an applied field, also resembles that observed in sheet silicates and indicates that both Fe(II) and Fe(III) are involved in magnetic ordering. This “ferromagnetic” behavior is probably due to the double-exchange mechanism known from other mixed-valence Fe(II)–Fe(III) systems. A significant part of the clay-mineral iron is redox sensitive. It is proposed that the color change of the sediment at the redox boundary from tan to green is related to the increase of Fe(II)–Fe(III) pairs in the layer silicates, because of the intervalence electron transfer bands which are caused by such pairs.  相似文献   

15.
To assess the dynamics of microbially mediated U-clay redox reactions, we examined the reduction of iron(III)-rich nontronite NAu-2 and uranium(VI) by Shewanella oneidensis MR-1. Bioreduction experiments were conducted with combinations and varied concentrations of MR-1, nontronite, U(VI) and the electron shuttle anthraquinone-2,6-disulfonate (AQDS). Abiotic experiments were conducted to quantify U(VI) sorption to NAu-2, the reduction of U(VI) by chemically-reduced nontronite-Fe(II), and the oxidation of uraninite, U(IV)O2(s), by nontronite-Fe(III). When we incubated S. oneidensis MR-1 at lower concentration (0.5 × 108 cell mL−1) with nontronite (5.0 g L−1) and U(VI) (1.0 mM), little U(VI) reduction occurred compared to nontronite-free incubations, despite the production of abundant Fe(II). The addition of AQDS to U(VI)- and nontronite-containing incubations enhanced both U(VI) and nontronite-Fe(III) reduction. While U(VI) was completely reduced by S. oneidensis MR-1 at higher concentration (1.0 × 108 cell mL−1) in the presence of nontronite, increasing concentrations of nontronite led to progressively slower rates of U(VI) reduction. U(VI) enhanced nontronite-Fe(III) reduction and uraninite was oxidized by nontronite-Fe(III), demonstrating that U served as an effective electron shuttle from S. oneidensis MR-1 to nontronite-Fe(III). The electron-shuttling activity of U can explain the lack or delay of U(VI) reduction observed in the bulk solution. Little U(VI) reduction was observed in incubations that contained chemically-reduced nontronite-Fe(II), suggesting that biologic U(VI) reduction drove U valence cycling in these systems. Under the conditions used in these experiments, we demonstrate that iron-rich smectite may inhibit or delay U(VI) bioreduction.  相似文献   

16.
The low-temperature synthesis of clay minerals is possible through the aging of freshly prepared hydroxide—silica precipitates. The rapid synthesis of nontronite is only possible at surface temperatures under reducing conditions. Under oxidizing conditions, pure Fe(III)- or pure Al-smectite minerals could not be synthesized at low temperatures. It is only from Fe(II)-containing solutions that nontronite and lembergite, the di-[Fe(III)] and tri-[Fe(II)] octahedral three-layer silicates, are built up in several days at low temperatures. The presence of Fe(II) enables an octahedral layer of the brucite—gibbsite type to be formed. These are necessary for the bidimensional orientation of SiO4 tetrahedrons, leading to clay-mineral formation. The Fe2+ and/or Mg2+ ions are necessary for the formation of the Al3+- and Fe3+-containing three-layer silicate minerals.Under reducing diagenetic conditions, the Fe contents in recent sediments are sufficient to build up Al-rich three-layer minerals under both fresh-water and salt-water conditions.  相似文献   

17.
《Applied Geochemistry》2002,17(4):431-443
A steady state geochemical model has been developed to assist in understanding surface-catalysed oxidation of aqueous Fe(II) by O2(aq), which occurs rapidly at circumneutral pH. The model has been applied to assess the possible abiotic removal of Fe(II)(aq) from alkaline ferruginous mine water discharges using engineered reactors with high specific-surface area filter media. The model includes solution and surface speciation equilibrium, oxidation kinetics of dissolved and adsorbed Fe(II) species and mass transfer of O2(g). Limited field data for such treatment of a mine water discharge were available for model development and assessment of possible parameter values. Model results indicate that an adsorption capacity between 10−6 and 10−5 mol l−1 is sufficient for complete removal, by oxidation, of the Fe(II)(aq) load at the discharge. This capacity corresponds approximately to that afforded by surface precipitation of Fe(III) oxide onto plastic trickling filter media typically used for biological treatment of wastewater. Extrapolated literature values for microbial oxidation of Fe(II)(aq) by neutrophilic microbial populations to the simulated reactor conditions suggested that the microbially-mediated rate may be several orders-of-magnitude slower than the surface-catalysed oxidation. Application of the model across a range of mine water discharge qualities shows that high Fe(II)(aq) loadings can be removed if the discharge is sufficiently alkaline. Additional reactor simulations indicate that reactor efficiency decreases dramatically with pH in the near acid region, coinciding with the adsorption edge for Fe2+ on Fe oxyhydroxide. Alkaline discharges thus buffer pH within the range where Fe(II)(aq) adsorbs onto the accreting Fe hydroxide mineral surface, and undergoes rapid catalytic oxidation. The results suggest that the proposed treatment technology may be appropriate for highly ferruginous alkaline discharges, typically associated with abandoned deep coal mines.  相似文献   

18.
The stable isotope values of carbon (δ13Cmethane) and hydrogen (δ2Hmethane) from methane molecules trapped in gas hydrates are useful for differentiation of methane from microbial and thermal origins, providing valuable information during hydrocarbon exploration. Recent studies have reported catalysis of methane hydrates when smectite clays and biosurfactants are present in hydrate-hosting sediments, but catalytic influences on the values of δ13Cmethane and δ2Hmethane are not well documented. In this study, pressure vessel methane hydrates were formed from solutions in contact with smectite clays (montmorillonite and nontronite) and biosurfactants (rhamnolipids and surfactin). Experiments show less than 1‰ differences in values of δ13Cmethane between free and encaged molecules and up to 10‰ variations in values of δ2Hmethane between free and encaged molecules. Notably, methane consumption increased in methane hydrates formed from solutions containing biosurfactants and biosurfactant–smectite mixtures. Results presented here indicate that a hydrate formed in the presence of smectite clays and biosurfactants are characterized by small shifts in free and encaged values of δ13Cmethane and δ2Hmethane and do not complicate interpretation of gas origin. In contrast, methane consumption in hydrates formed under the catalytic effect of smectite clays and biosurfactants modifies gas wetness, obscures gas origin and complicates interpretation of thermal maturity.  相似文献   

19.
Electronic and magnetic properties of tennantite subfamily of tetrahedrite-group minerals have been studied by copper nuclear quadrupole resonance (NQR), nuclear magnetic resonance (NMR) and SQUID magnetometry methods. The temperature dependences of copper NQR frequencies and line-width, nuclear spin-lattice relaxation rate T 1−1 and nuclear spin-echo decay rate T 2−1 in tennantite samples in the temperature range 4.2–210 K is evidence of the presence of field fluctuations caused by electronic spins hopping between copper CuS3 positions via S2 bridging atom. The analysis of copper NQR data at low temperatures points to the magnetic phase transition near 65 K. The magnetic susceptibility in the range 2–300 K shows a Curie–Weiss behavior, which is mainly determined by Fe2+ paramagnetic substituting ions.  相似文献   

20.
Susceptibility, magnetisation and Mössbauer measurements are reported for a representative selection of 2:1 layer phyllosilicates. Eight samples from the mica, vermiculite and smectite groups include examples diluted in iron which are paramagnetic at all temperatures, as well as iron-rich silicates which order magnetically below 10 K. Anisotropic susceptibility of crystals of muscovite, biotite and vermiculite is quantitatively explained with a model where the Fe2+ ions lie in sites of effective trigonal symmetry, the trigonal axis lying normal to the sheets. The ferrous ground state is an orbital singlet. Ferric iron gives an isotropic contribution to the susceptibility. Fe2+-Fe2+ exchange interactions are ferromagnetic with y ～ 2 K, whereas Fe3+-Fe3+ coupling is antiferromagnetic in the purely ferric minerals. A positive paramagnetic Curie temperature for glauconite may be attributable to Fe2+ → Fe3+ charge transfer. Magnetic order was found to set in inhomogeneously for glauconite at 1–7 K. One biotite sample showed an antiferromagnetic transition at T N =7 K marked by a well-defined susceptibility maximum. Its magnetic structure, consisting of ferromagnetic sheets with moments in their planes coupled antiferromagnetically by other, weak interactions, resembles that found earlier for the 1:1 mineral greenalite.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号