首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Drainage patterns and tectonic forcing: a model study for the Swiss Alps   总被引：1，自引：0，他引：1  
ABSTRACT A linear surface process model is used to examine the effect of different patterns of rock uplift on the evolution of the drainage network of the Swiss Alps. An asymmetric pattern of tectonic forcing simulates a phase of rapid retrothrusting in the south of the Swiss Alps (‘Lepontine’‐type uplift). A domal pattern of tectonic forcing in the north of the model orogen simulates the phase of the formation of the ‘Aar massif’, an external basement uplift in the frontal part of the orogenic wedge (‘Aar’‐type uplift). Model runs using the ‘Lepontine’‐type uplift pattern result in a model mountain chain with a water divide in the zone of maximum uplift and orogen‐normal rivers. Model runs examining the effect of ‘Lepontine’‐type uplift followed by ‘Aar’‐type uplift show that the initially formed orogen‐normal river system and the water divide are both very stable and hardly affected by the additional uplift. This indifference to changes in tectonic forcing is mainly due to the requirement of a high model erosion capacity for the river systems in order to reproduce the exhumation data (high‐grade rocks in the south of the Swiss Alps point to removal of a wedge‐shaped nappe stack with a maximum thickness of about 25 km). The model behaviour is in agreement with the ancestral drainage pattern of the Alps in Oligocene and Miocene times and with the modern pattern observed in the Coast Range of British Columbia; in both cases river incision occurred across a zone of rapid uplift in the lower course of the rivers. The model behaviour does not, however, explain the modern drainage pattern in the Alps with its orogen‐parallel rivers. When the model system is forced to develop two locally independent main water divides (simultaneous ‘Lepontine’‐ and ‘Aar’‐type uplift), a zone of reduced erosional potential forms between the two divides. As a consequence, the divides approach each other and eventually merge. The new water divide remains fixed in space independent of the two persisting uplift maxima. The model results suggest that spatial and temporal changes in tectonic forcing alone cannot produce the change from the orogen‐normal drainage pattern of the Swiss Alps in Oligocene–Miocene times to the orogen‐parallel drainage observed in the Swiss Alps today.  相似文献   

2.
In this paper we discuss the large-scale geomorphological characteristics of the Swiss Alps based on numerical analysis of a digital elevation model and compare these to an erodibility map constructed from a geotechnical map of Switzerland and regional geomorphological studies. Comparing the erodibility map with the large-scale morphometry shows an intimate relationship between mountain-scale erodibility and topography. On average, higher mean elevations and steeper mean slopes correlate with regions where rocks of low erodibility prevail. Areas with high peaks as well as the main water divides are controlled by the presence of bedrock with low to very low detachability. The drainage network of the Swiss Alps shows a close relationship to the lithological differences as well. Major longitudinal valleys follow easily erodible units. In the eastern and western part of the Swiss Alps, the highest values of local relief are located to the south of the main water divide, whereas in the central part, local relief is higher to the north of the main water divide. The large-scale geomorphic characteristics regarded in the framework of the geological history of uplift and denudation suggest that low and very low erodibilities lead to the development of areas of high elevations which are likely to persist over periods of 10–15 Ma. As the analysis of the Lepontine area shows, 20 Ma after cessation of exhumation, such high elevations are likely to be worn down and to manifest themselves as high relief only.  相似文献   

3.
We present a new palaeogeographic reconstruction of the Helvetic zone based on the palinspastic restoration of 18 recently published and new retrodeformed structural cross‐sections through the Swiss Alps, Haute Savoie (France) and Vorarlberg (Austria). The reconstruction resulted in two palaeogeographic maps, one of the pre‐Mesozoic basement, the other for the sedimentary cover of the Helvetic shelf including the Nummulitic deposits of the Palaeocene–Eocene, which mark the onset of the North Alpine Foreland Basin of the Alps. Based on the palaeogeographic maps and a precise dating of the Nummulitic deposits, we established maps of the facies distribution including the estimated positions of the ancient coastlines and their evolution through time. The North Alpine Foreland Basin started as a narrow flysch basin in Palaeocene–Eocene times. Emplacement of the Penninic nappes led to the formation of a mélange on the active margin of this basin. This early foreland basin and its active margin migrated to the NW in Early Eocene times at a rate of about 10 mm yr?1. The maps also reveal a general progressive north‐ and westward propagation of the Eocene coastline between 50–34 Ma and during the Oligocene until approximately 32 Ma. Coastline propagation reveals strongly varying rates both spatially and temporally, and is ca. 1–2 mm yr?1 between 50 and 37 Ma and approximately 20 mm yr?1 between 37 and 32 Ma. Evolution and orientation of the Tertiary coastlines infers that the early development of the North Alpine Foreland Basin was mainly controlled initially by eustatic sea‐level fluctuations superimposed on flexural subsidence. After 37 Ma, we suggest a tectonically controlled coastline evolution in response to the collision of the European and Adriatic margins.  相似文献   

4.
Despite abundant data on the early evolution of the Central Alps, the latest stage exhumation history, potentially related to relief formation, is still poorly constrained. We aim for a better understanding of the relation between glaciation, erosion and sediment deposition. Addressing both topics, we analysed late Pliocene to recent deposits from the Upper Rhine Graben and two modern river sands by apatite fission‐track and (U‐Th‐Sm)/He thermochronology. From the observed age patterns we extracted the sediment provenance and paleo‐erosion history of the Alpine‐derived detritus. Due to their pollen and fossil record, the Rhine Graben deposits also provide information on climatic evolution, so that the erosion history can be related to glacial evolution during the Plio‐Pleistocene. Our data show that Rhine Graben deposits were derived from Variscan basement, Hegau volcanics, Swiss Molasse Basin, and the Central Alps. The relations between glaciation, Alpine erosion, and thermochronological age signals in sedimentary rocks are more complex than assumed. The first Alpine glaciation during the early Pleistocene did not disturb the long‐term exhumational equilibrium of the Alps. Recent findings indicate that main Alpine glaciation occurred at ca. 1 Ma. If true, then main Alpine glaciation was coeval with an apparent decrease of hinterland erosion rates, contrary to the expected trend. We suggest that glaciers effectively sealed the landscape, thus reducing the surface exposed to erosion and shifting the area of main erosion north toward the Molasse basin, causing sediment recycling. At around 0.4 Ma, erosion rates increased again, which seems to be a delayed response to main glaciation. The present‐day erosion regime seems to be dominated by mass‐wasting processes. Generally, glacial erosion rates did not exceed the pre‐glacial long‐term erosion rates of the Central Alps.  相似文献   

5.
An extensive low‐temperature thermochronology study of the Swiss part of the North Alpine Foreland Basin has been conducted with the aim of deciphering the late Neogene basin development. Apatite fission‐track (AFT) ages from wells located in the distal and weakly deformed Plateau Molasse reveal rapid, km‐scale erosion with an onset in early Pliocene times. The distribution of erosion implies that there was a strong gradient in late Miocene deposition rates along the strike of the basin, with an increase towards the northeast. Additionally, renewed tectonic activity and km‐scale out‐of‐sequence thrusting during Plio‐Pleistocene times is indicated by AFT data from wells within the thrusted, proximal Subalpine Molasse. Several different mechanisms driving late Neogene basin erosion and accelerated erosional discharge from the European Alps have been considered in the literature. Based on our AFT results, we reevaluate previously published hypotheses, and suggest that a change in climate and/or drainage reorganisation coincided and possibly interacted with preexisting tectonic and geodynamic forces in the Alpine region.  相似文献   

6.
《Basin Research》2018,30(3):426-447
Integration of detrital zircon geochronology and three‐dimensional (3D) seismic‐reflection data from the Molasse basin of Austria yields new insight into Oligocene‐early Miocene palaeogeography and patterns of sediment routing within the Alpine foreland of central Europe. Three‐dimensional seismic‐reflection data show a network of deep‐water tributaries and a long‐lived (>8 Ma) foredeep‐axial channel belt that transported Alpine detritus greater than 100 km from west to east. We present 793 new detrital zircon ages from 10 sandstone samples collected from subsurface cores located within the seismically mapped network of deep‐water tributaries and the axial channel belt. Grain age populations correspond with major pre‐Alpine orogenic cycles: the Cadomian (750–530 Ma), the Caledonian (490–380 Ma) and the Variscan (350–250 Ma). Additional age populations correspond with Eocene‐Oligocene Periadriatic magmatism (40–30 Ma) and pre‐Alpine, Precambrian sources (>750 Ma). Although many samples share the same age populations, the abundances of these populations vary significantly. Sediment that entered the deep‐water axial channel belt from the west (Freshwater Molasse) and southwest (Inntal fault zone) is characterized by statistically indistinguishable age distributions that include populations of Variscan, Caledonian and Cadomian zircon at modest abundances (15–32% each). Sandstone from a shallow marine unit proximal to the northern basin margin consists of >75% Variscan (350–300 Ma) zircon, which originated from the adjacent Bohemian Massif. Mixing calculations based on the Kolmogorov–Smirnoff statistic suggest that the Alpine fold‐thrust belt south of the foreland was also an important source of detritus to the deep‐water Molasse basin. We interpret evolving detrital zircon age distributions within the axial foredeep to reflect a progressive increase in longitudinal sediment input from the west (Freshwater Molasse) and/or southwest (Inntal fault zone) relative to transverse sediment input from the fold‐thrust belt to the south. We infer that these changes reflect a major reorganization of catchment boundaries and denudation rates in the Alpine Orogen that resulted in the Alpine foreland evolving to dominantly longitudinal sediment dispersal. This change was most notably marked by the development of a submarine canyon during deposition of the Upper Puchkirchen Formation that promoted sediment bypass eastward from Freshwater Molasse depozones to the Molasse basin deep‐water axial channel belt. The integration of 3D seismic‐reflection data with detrital zircon geochronology illustrates sediment dispersal patterns within a continental‐scale orogen, with implications for the relative role of longitudinal vs. transverse sediment delivery in peripheral foreland basins.  相似文献   

7.
The Molasse Basin of Switzerland evolved through a distinct late Neogene history with initial development as a classic foredeep or foreland basin in response to loading of the lithosphere by the Alpine orogen. In the central and western foreland, the foredeep behaviour was terminated by deformation and uplift of the Jura Mountains in the distal regions of the foredeep. Following the Jura deformation the Plateau Molasse remained largely undeformed as it rode ‘piggy‐back’ style above the decollement feeding displacement into the Jura. Sediment accumulation data for the Molasse suggests that sedimentation in the Plateau Molasse region continued until the basin was inverted at about 5 Ma. We present a mechanical model for this sequence of events in which deformation jumps across much of the basin to the distal Jura because of the dip on the weak evaporitic decollement and the wedge‐shape of the foredeep basin. Subsequently, the Plateau Molasse remained largely undeformed as a result of continued sedimentation in a wedgetop basin, where the physical properties and geometry of the orogenic wedge combine to produce a critical wedge whose critical surface slope would be less than zero and thus should dip towards the Alpine interior. Accommodation space is created over this negative surface–slope segment of the wedge and sedimentation maintains this slope near zero, stabilizing the wedge. We present a simple analytical theory for the necessary conditions for such a ‘negative‐alpha basin’ to develop and be maintained. We compare this theory to the late Neogene evolution of the Alps, Molasse Basin and Jura Mountains and infer physical properties for the decollement.  相似文献   

8.
During the Cretaceous, the Neuquén Basin transitioned from an extensional back‐arc to a retroarc foreland basin. We present a multi‐proxy provenance study of Aptian to Santonian (125–84 Ma) continental sedimentary rocks preserved in the Neuquén Basin used to resolve changes of sediment drainage pattern in response to the change in tectonic regime. Sandstone petrology and U–Pb detrital zircon geochronology constrain the source units delivering detritus to the basin; apatite U–Pb and fission track dating further resolve provenance and determine the age and patterns of exhumation of the source rocks. Sandstone provenance records a sharp change from a mixed orogenic source during Aptian time (ca. 125 Ma), to a magmatic arc provenance in the Cenomanian (ca. 100 Ma). We interpret this provenance change as the result of the drainage pattern reorganisation from divergent to convergent caused by tectonic basin inversion. During this inversion and early stages of contraction, a transient phase of uplift and basin erosion, possibly due to continental buckling, caused the pre‐Cenomanian unconformity dividing the Lower from Upper Cretaceous strata in the Neuquén Basin. This phase was followed by the development of a retroarc foreland basin characterised by a volcanic arc sediment provenance progressively shifting to a mixed continental basement provenance during Turonian‐Santonian (90–84). According to multi‐proxy provenance data and lag times derived from apatite fission track analysis, this trend is the result of a rapidly exhuming source within the Cordillera to the west, in response to active compressional tectonics along the western margin of South America, coupled with the increasing contribution of material from the stable craton to the east; this contribution is thought to be the result of the weak uplift and exhumation of the foreland due to eastward migration of the forebulge.  相似文献   

9.
The spatial and temporal organization of depositional environments in drainage networks of foreland basins reflect the tectonic and erosional dynamics associated with the development of mountain belts. We provide field evidences for the initiation and evolution of a complex drainage system in the French South Alpine Foreland Basin related to Western Alps exhumation. Sedimentological and structural analyses of the Eocene–Early Miocene succession were investigated in the (1) Argens/Peyresq, (2) Barrême/Blieux/Taulanne and (3) Montmaur/St‐Disdier sectors. Combined with the existing structural data set, we propose a new model that integrates the regional tectonic activity, the palaeovalley orientation and their dynamics through time. The Eocene–Miocene deposits clearly show the existence of N–S‐oriented palaeovalleys. The systematic presence of early NE–SW‐ to N–S‐oriented strike‐slip and extensional faults in the palaeovalleys suggests that these tectonic structures were responsible for the formation of the initial N–S‐oriented basin‐floor topographies. The vertical offset of the strike‐slip faults induced sufficient accommodation space for the Cenozoic sedimentation since the Middle Eocene. It implies the creation of N–S‐oriented palaeovalleys during the northward Pyrenean‐Provençal phase, pre‐dating westward Alpine compression. Later, the Oligocene Alpine tectonic phase induced drainage expansion toward the orogenic wedge and the erosion of the exhumed internal massifs by transverse streams. The establishment of new connections between the old topographic lows formed a longitudinal drainage pattern that remains the locus of deposition in a regional sedimentary routing system. In this model, former strike‐slip faults correspond to weakness zones overprinted by the westward Alpine shortening that allowed the formation of the modern piggyback basin structure of the foreland and the long‐time preservation of the palaeovalley geometry.  相似文献   

10.
A thrust wedge with unusual geometry has developed under very oblique (50–60°) convergence between the Pacific and Australian Plates, along the 240‐km length of the Fiordland margin, New Zealand. The narrow (25 km‐wide) wedge comprises three overlapping components, lying west of the offshore section of the Alpine Fault, and straddles a change of > 30° in the regional strike of the plate boundary. Swath bathymetry, marine seismic reflection profiles, and dated samples together reveal the stratigraphy, structure, and evolution of the wedge and the underthrusting, continental, Caswell High (Australian Plate). Lateral variations in the composition and structure of the accretionary wedge, and the depth of the décollement thrust, result partly from variations in crustal structure and basement relief of the underthrust plate, and from associated variations in the thickness of turbidites available for frontal accretion. In the southern Fiordland Basin the underthrust plate is undergoing flexural uplift and extension, and a thick turbidite section is available for accretion. Along‐strike, a structurally elevated portion of the underthrust plate is very obliquely colliding with the central part of the accretionary wedge, the turbidite section available for accretion is condensed, and structural inversion occurs in the underthrust plate. Growth of the thrust wedge is inferred to have commenced in the Pliocene prior to 3 ± 1 Ma, but much of the wedge developed in the Quaternary. The spatial distribution of thrusting has varied through time, with most late Quaternary shortening occurring on structures within 10 km of the right‐stepping deformation front. Estimates of the magnitude and rates of deformation indicate that the wedge accommodates a significant component of the oblique convergence between the Pacific and Australian Plates. Shortening of up to 7.3 ± 1.4 km and 9.1 ± 1.8 km within the southern and central parts of the wedge, respectively, represent about 5–15% of the total 70–140 km of shortening predicted across the plate boundary since 6.4 Ma, and about 10–30% since 3 Ma. Late Quaternary shortening rates of the order of 1–5 mm yr?1, estimated across both the northern and southern parts of the wedge, represent about 10–50 and 5–21% of the total NUVEL‐1 A shortening across the plate boundary at these respective latitudes, implying that most shortening is occurring onshore. Furthermore, possible oblique‐slip thrusting within the wedge may be accommodating boundary‐parallel displacement of 0–6 mm yr?1, representing 0–17% of the total predicted within the plate boundary.  相似文献   

11.
Late early–early middle Miocene (Burdigalian–Langhian) time on the island of Corsica (western Mediterranean) was characterized by a combination of (i) postcollisional structural inversion of the main boundary thrust system between the Alpine orogenic wedge and the foreland, (ii) eustatic sealevel rise and (iii) subsidence related to the development of the Ligurian‐Provençal basin. These processes created the accommodation for a distinctive continental to shallow‐marine sedimentary succession along narrow and elongated basins. Much of these deposits have been eroded and presently only a few scattered outcrop areas remain, most notably at Saint‐Florent and Francardo. The Burdigalian–Langhian sedimentary succession at Saint‐Florent is composed of three distinguishing detrital components: (i) siliciclastic detritus derived from erosion of the nearby Alpine orogenic wedge, (ii) carbonate intrabasinal detritus (bioclasts of shallow‐marine and pelagic organisms), and (iii) siliciclastic detritus derived from Hercynian‐age foreland terraines. The basal deposits (Fium Albino Formation) are fluvial and composed of Alpine‐derived detritus, with subordinate foreland‐derived volcanic detritus. All three detrital components are present in the middle portion of the succession (Torra and Monte Sant'Angelo Formations), which is characterized by thin transitional deposits evolving vertically into fully marine deposits, although the carbonate intrabasinal component is predominant. The Monte Sant'Angelo Formation is characteristically dominated by the deposits of large gravel and sandwaves, possibly the result of current amplification in narrow seaways that developed between the foreland and the tectonically collapsing Alpine orogenic wedge. The laterally equivalent Saint‐Florent conglomerate is composed of clasts derived from the late Permian Cinto volcanic district within the foreland. The uppermost unit (Farinole Formation) is dominated by bioclasts of pelagic organisms. The Saint‐Florent succession was deposited during the last phase of the counterclockwise rotation of the Corsica–Sardinia–Calabria continental block and the resulting development of the Provençal oceanic basin. The succession sits at the paleogeographic boundary between the Alpine orogenic wedge (to the east), its foreland (to the west), and the Ligurian‐Provençal basin (to the northwest). Abrupt compositional changes in the succession resulted from the complex, varying interplay of post‐collisional extensional tectonism, eustacy and competing drainage systems.  相似文献   

12.
Basin‐wide correlation of Messinian units and Plio‐Quaternary chronostratigraphic markers (5.3 Ma, 2.6 Ma, 0.9 Ma and 0.45 Ma), the mapping of total sediment thickness and the determination of overall sedimentary volumes enabled us to provide a high‐resolution quantitative history of sediment volumes for the last 6 Ma along the Gulf of Lions margin. The results point to (i) a dramatic increase in terrigenous sediment input during the Messinian Salinity Crisis. This increased sedimentation reflects enhanced regional fluvial erosion related to the dramatic fall of Mediterranean base‐level. Stronger weathering due to a regional wetter climate probably also increased erosional fluxes. (ii) A sediment input three times higher during the Plio‐Quaternary compared to the Miocene seems in agreement with published measurements from World's ocean. However, the timing of this increase being uncertain, it implies that the trigger(s) also remain(s) uncertain. (iii) A decrease in detrital volume around 2.6 Ma is attributed to a regional change in the drainage pattern of rivers in the northwestern Alps. (iv) This study also highlights the Mid‐Pleistocene Revolution around 0.9 Ma, which resulted in an almost doubling of sediment input in the Provencal Basin.  相似文献   

13.
The Orphan Basin, lying along the Newfoundland rifted continental margin, formed in Mesozoic time during the opening of the North Atlantic Ocean and the breakup of Iberia/Eurasia from North America. To investigate the evolution of the Orphan Basin and the factors that governed its formation, we (i) analysed the stratigraphic and crustal architecture documented by seismic data (courtesy of TGS), (ii) quantified the tectonic and thermal subsidence along a constructed geological transect, and (iii) used forward numerical modelling to understand the state of the pre‐rift lithosphere and the distribution of deformation during rifting. Our study shows that the pre‐rift lithosphere was 200‐km thick and rheologically strong (150‐km‐thick elastic plate) prior to rifting. It also indicates that extension in the Orphan Basin occurred in three distinct phases during the Jurassic, the Early Cretaceous and the Late Cretaceous. Each rifting phase is characterized by a specific crustal and subcrustal thinning configuration. Crustal deformation initiated in the eastern part of the basin during the Jurassic and migrated to the west during the Cretaceous. It was coupled with a subcrustal thinning which was reduced underneath the eastern domain and very intense in the western domains of the basin. The spatial and temporal distribution of thinning and the evolution of the lithosphere rheology through time controlled the tectonic, stratigraphic and crustal architecture that we observe today in the Orphan Basin.  相似文献   

14.
The transition to a post‐orogenic state in mountain ranges has been identified by a change from active subsidence to isostatic rebound of the foreland basin. However, the nature of the interplay between isostatic rebound and sediment supply, and their impact on the topographic evolution of a range and foreland basin during this transition, has not been fully investigated. Here, we use a box model to explore the syn‐ to post‐orogenic evolution of foreland basin/thrust wedge systems. Using a set of parameter values that approximate the northern Pyrenees and the neighbouring Aquitaine foreland basin, we evaluate the controls on sediment drape over the frontal parts of the retro‐wedge following cessation of crustal thickening. Conglomerates preserved at approximately 600‐m elevation, which is ~ 300 m above the present mountain front in the northern Pyrenees are ca. 12 Ma, approximately 10 Myrs younger than the last evidence of crustal thickening in the wedge. Using the model, this post‐orogenic sediment drape is explained by the combination of a sustained, high sediment influx from the range into the basin relative to the efflux out of the basin, combined with cessation of the generation of accommodation space through basin subsidence. Post‐orogenic sediment drape is considered a generic process that is likely to be responsible for elevated low‐gradient surfaces and preserved remnants of continental sedimentation draping the outer margins of the northern Pyrenean thrust wedge.  相似文献   

15.
Samples taken from the top surfaces of boulders on the Lake Misery moraines at Arthur's Pass, in the Southern Alps of New Zealand, were analysed for 10Be by accelerator mass spectrometry. Exposure ages calculated with the currently accepted production rate, along with scaling corrections for sample latitude and elevation (42°50'S, 960 m), are: 9300 ± 990, 11,000 ± 1360, 11,410 ± 1030, 12,050 ± 960, and 12,410 ± 1180 years. We consider the date of 9300 years to be an outlier, not included in our mean exposure age of 11,720 ± 320 years for the Lake Misery moraines. Based on exposure ages and geomorphologic similarities, we compare the Lake Misery moraines with an Egesen moraine complex at Julier Pass in the Swiss Alps (46°30'N, 2200 m). Based on the 10Be, 26Al, and 36Cl exposure ages of three boulders, we calculate a mean exposure age of 11,750 ± 140 years for the outer Egesen moraine at Julier Pass. Based solely on 10Be measurements, we obtain a mean exposure age of 11,860 ± 210 years for this outer moraine. Egesen moraines in the Swiss Alps represent glacier readvance during the Younger Dryas cold reversal, based on regional correlations and on basal radiocarbon dates from bogs located up-valley of Egesen moraines. The exposure dates from Arthur's Pass and Julier Pass show synchronous glacier advances both in the Southern Alps and in the European Alps during the European Younger Dryas chronozone of Mangerud et al .  相似文献   

16.
ABSTRACT Magnetostratigraphic chronologies, together with sedimentological, petrological, seismic and borehole data derived from the Oligo/Miocene Lower Freshwater Molasse Group of the North Alpine foreland basin enable a detailed reconstruction of alluvial architecture in relation to Alpine orogenic events. Six depositional systems are recorded in the Lower Freshwater Molasse Group. The bajada depositional system comprises 200–400-m-thick successions of ribbon channel conglomerates and overbank fines including mud- and debris-flows which were derived from the Alpine border chain. The alluvial megafan depositional system is made up of massive pebble-to-cobble conglomerates up to 3 km thick which reveal a fan-shaped geometry. This depositional environment grades downcurrent into the conglomerate channel belt depositional system, which comprises an ≈2-km-thick alternation of channel conglomerates and overbank fines. The sandstone channel belt depositional system is bordered by the 100–400-m-thick overbank fines assigned to the floodplain depositional system. At the feather edge of the basin, 50–400-m-thick lacustrine sediments in both clastic and carbonate facies represent the lacustrine depositional system. The spatial and temporal arrangement of these depositional systems was controlled by the geometrical evolution of the Molasse Basin. During periods of enhanced sediment supply and during phases of stable sliding of the entire wedge, >2000-m-thick coarsening-and thickening-upward megasequences comprising the conglomerate channel belt, alluvial megafan and bajada depositional systems were deposited in a narrow wedge-shaped basin. In the distal reaches of the basin, however, no sedimentary trend developed, and the basin fill comprises a <500-m-thick series of sandstone meander belt, floodplain and lacustrine depositional systems. During phases of accretion at the toe of the wedge, the basin widened, and prograding systems of multistorey channel sandstones extended from the thrust front to the distal reaches of the basin. The rearrangement of the depositional systems as a function of changing orogenic conditions created discordances, which are expressed seismically by onlap and erosion of beds delimiting sedimentary sequences. Whereas stable sliding of the wedge succeeded by accretion at the toe of the wedge is recorded in the proximal Lower Freshwater Molasse by a coarsening-and thickening-upward megasequence followed by erosion, the opposite trend developed in the distal reaches of the Molasse. Here, fine-grained sandstones and mudstones were deposited during periods of stable sliding, whereas phases of accretion caused a coarsening- and thickening-up megasequence to form.  相似文献   

17.
The style of extension and strain distribution during the early stages of intra-continental rifting is important for understanding rift-margin development and can provide constraints for lithospheric deformation mechanisms. The Corinth rift in central Greece is one of the few rifts to have experienced a short extensional history without subsequent overprinting. We synthesise existing seismic reflection data throughout the active offshore Gulf of Corinth Basin to investigate fault activity history and the spatio-temporal evolution of the basin, producing for the first time basement depth and syn-rift sediment isopachs throughout the offshore rift. A major basin-wide unconformity surface with an age estimated from sea-level cycles at ca . 0.4 Ma separates distinct seismic stratigraphic units. Assuming that sedimentation rates are on average consistent, the present rift formed at 1–2 Ma, with no clear evidence for along-strike propagation of the rift axis. The rift has undergone major changes in relative fault activity and basin geometry during its short history. The basement depth is greatest in the central rift (maximum ∼3 km) and decreases to the east and west. In detail however, two separated depocentres 20–50 km long were created controlled by N- and S-dipping faults before 0.4 Ma, while since ca . 0.4 Ma a single depocentre (80 km long) has been controlled by several connected N-dipping faults, with maximum subsidence focused between the two older depocentres. Thus isolated but nearby faults can persist for timescales ca . 1 Ma and form major basins before becoming linked. There is a general evolution towards a dominance of N-dipping faults; however, in the western Gulf strain is distributed across several active N- and S-dipping faults throughout rift history, producing a more complex basin geometry.  相似文献   

18.
The Qiongdongnan Basin is one of the largest Cenozoic rifted basins on the northern passive margin of the South China Sea. It is well known that since the Late Miocene, approximately 10 Ma after the end of the syn‐rift phase, this basin has exhibited rapid thermal subsidence. However, detailed analysis reveals a two‐stage anomalous subsidence feature of the syn‐rift subsidence deficit and the well‐known rapid post‐rift subsidence after 10.5 Ma. Heat‐flow data show that heat flow in the central depression zone is 70–105 mW m?2, considerably higher than the heat flow (<70 mW m?2) on the northern shelf. In particular, there is a NE‐trending high heat‐flow zone of >85 mW m?2 in the eastern basin. We used a numerical model of coupled geothermal processes, lithosphere thinning and depositional processes to analyse the origin of the anomalous subsidence pattern. Numerical analysis of different cases shows that the stretching factor βs based on syn‐rift sequences is less than the observed crustal stretching factor βc, and if the lithosphere is thinned with βc during the syn‐rift phase (before 21 Ma), the present basement depth can be predicted fairly accurately. Further analysis does not support crustal thinning after 21 Ma, which indicates that the syn‐rift subsidence is in deficit compared with the predicted subsidence with the crustal stretching factor βc. The observed high heat flow in the central depression zone is caused by the heating of magmatic injection equivalently at approximately 3–5 Ma, which affected the eastern basin more than the western basin, and the Neogene magmatism might be fed by the deep thermal anomaly. Our results suggest that the causes of the syn‐rift subsidence deficit and rapid post‐rift subsidence might be related. The syn‐rift subsidence deficit might be caused by the dynamic support of the influx of warmer asthenosphere material and a small‐scale thermal upwelling beneath the study area, which might have been persisting for about 10 Ma during the early post‐rift phase, and the post‐rift rapid subsidence might be the result of losing the dynamic support with the decaying or moving away of the deep thermal source, and the rapid cooling of the asthenosphere. We concluded that the excess post‐rift subsidence occurs to compensate for the syn‐rift subsidence deficit, and the deep thermal anomaly might have affected the eastern Qiongdongnan Basin since the Late Oligocene.  相似文献   

19.
Sedimentary basins in the interior of orogenic plateaus can provide unique insights into the early history of plateau evolution and related geodynamic processes. The northern sectors of the Iranian Plateau of the Arabia–Eurasia collision zone offer the unique possibility to study middle–late Miocene terrestrial clastic and volcaniclastic sediments that allow assessing the nascent stages of collisional plateau formation. In particular, these sedimentary archives allow investigating several debated and poorly understood issues associated with the long‐term evolution of the Iranian Plateau, including the regional spatio‐temporal characteristics of sedimentation and deformation and the mechanisms of plateau growth. We document that middle–late Miocene crustal shortening and thickening processes led to the growth of a basement‐cored range (Takab Range Complex) in the interior of the plateau. This triggered the development of a foreland‐basin (Great Pari Basin) to the east between 16.5 and 10.7 Ma. By 10.7 Ma, a fast progradation of conglomerates over the foreland strata occurred, most likely during a decrease in flexural subsidence triggered by rock uplift along an intraforeland basement‐cored range (Mahneshan Range Complex). This was in turn followed by the final incorporation of the foreland deposits into the orogenic system and ensuing compartmentalization of the formerly contiguous foreland into several intermontane basins. Overall, our data suggest that shortening and thickening processes led to the outward and vertical growth of the northern sectors of the Iranian Plateau starting from the middle Miocene. This implies that mantle‐flow processes may have had a limited contribution toward building the Iranian Plateau in NW Iran.  相似文献   

20.
Summary. Czechoslovak deep seismic reflection profiles across the West Carpathians, the first in the Alpine-Himalayan belt, and surface geological data, suggest that the passive margin of the Eurasian plate was obliquely overriden by the upper Carpatho-Pannonian plate during the end of the Krosno sea subduction some 17-14 Ma ago. The following period was dominated by slight oblique continental collision (transpression and transtension) of the West Carpathian-East Alpine continental material escaping from the East Alpine collision zone and Eurasian Brunovistulic passive margin. Crustal shortening in the North was accommodated by significant northerly dipping backthrusting and crustal thickening. Backthrusting is clearly observable on deep seismic lines 2T and 3T. Different subsidence features are present on the deep seismic line 3T. There are active pull-apart graben in the Vienna basin, mid-Miocene (16–10 Ma) low-angle normal faulting in the Danube basin, and there is a normal simple shear zone offsetting the Moho boundary beneath the Danube basin.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号