首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 125 毫秒
1.
A landslide-hazard map is intended to show the location of future slope instability. Most spatial models of the hazard lack reliability tests of the procedures and predictions for estimating the probabilities of future landslides, thus precluding use of the maps for probabilistic risk analysis. To correct this deficiency we propose a systematic procedure comprising two analytical steps: “relative-hazard mapping” and “empirical probability estimation”. A mathematical model first generates a prediction map by dividing an area into “prediction” classes according to the relative likelihood of occurrence of future landslides, conditional by local geomorphic and topographic characteristics. The second stage estimates empirically the probability of landslide occurrence in each prediction class, by applying a cross-validation technique. Cross-validation, a “blind test” here using non-overlapping spatial or temporal subsets of mapped landslides, evaluates accuracy of the prediction and from the resulting statistics estimates occurrence probabilities of future landslides. This quantitative approach, exemplified by several experiments in an area near Lisbon, Portugal, can accommodate any subsequent analysis of landslide risk.  相似文献   

2.
In this article a statistical multivariate method, i.e., rare events logistic regression, is evaluated for the creation of a landslide susceptibility map in a 200 km2 study area of the Flemish Ardennes (Belgium). The methodology is based on the hypothesis that future landslides will have the same causal factors as the landslides initiated in the past. The information on the past landslides comes from a landslide inventory map obtained by detailed field surveys and by the analysis of LIDAR (Light Detection and Ranging)-derived hillshade maps. Information on the causal factors (e.g., slope gradient, aspect, lithology, and soil drainage) was extracted from digital elevation models derived from LIDAR and from topographical, lithological and soil maps. In landslide-affected areas, however, we did not use the present-day hillslope gradient. In order to reflect the hillslope condition prior to landsliding, the pre-landslide hillslope was reconstructed and its gradient was used in the analysis. Because of their limited spatial occurrence, the landslides in the study area can be regarded as “rare events”. Rare events logistic regression differs from ordinary logistic regression because it takes into account the low proportion of 1s (landslides) to 0s (no landslides) in the study area by incorporating three correction measures: the endogenous stratified sampling of the dataset, the prior correction of the intercept and the correction of the probabilities to include the estimation uncertainty. For the study area, significant model results were obtained, with pre-landslide hillslope gradient and three different clayey lithologies being important predictor variables. Receiver Operating Characteristic (ROC) curves and the Kappa index were used to validate the model. Both show a good agreement between the observed and predicted values of the validation dataset. Based on a qualified judgement, the created landslide susceptibility map was classified into four classes, i.e., very high, high, moderate and low susceptibility. If interpreted correctly, this classified susceptibility map is an important tool for the delineation of zones where prevention measures are needed and human interference should be limited in order to avoid property damage due to landslides.  相似文献   

3.
X. Yao  L.G. Tham  F.C. Dai 《Geomorphology》2008,101(4):572-582
The Support Vector Machine (SVM) is an increasingly popular learning procedure based on statistical learning theory, and involves a training phase in which the model is trained by a training dataset of associated input and target output values. The trained model is then used to evaluate a separate set of testing data. There are two main ideas underlying the SVM for discriminant-type problems. The first is an optimum linear separating hyperplane that separates the data patterns. The second is the use of kernel functions to convert the original non-linear data patterns into the format that is linearly separable in a high-dimensional feature space. In this paper, an overview of the SVM, both one-class and two-class SVM methods, is first presented followed by its use in landslide susceptibility mapping. A study area was selected from the natural terrain of Hong Kong, and slope angle, slope aspect, elevation, profile curvature of slope, lithology, vegetation cover and topographic wetness index (TWI) were used as environmental parameters which influence the occurrence of landslides. One-class and two-class SVM models were trained and then used to map landslide susceptibility respectively. The resulting susceptibility maps obtained by the methods were compared to that obtained by the logistic regression (LR) method. It is concluded that two-class SVM possesses better prediction efficiency than logistic regression and one-class SVM. However, one-class SVM, which only requires failed cases, has an advantage over the other two methods as only “failed” case information is usually available in landslide susceptibility mapping.  相似文献   

4.
During the last decade, slope failures were reported in a 500 km2 study area in the Geba–Werei catchment, northern Ethiopia, a region where landslides were not considered an important hazard before. Field observations, however, revealed that many of the failures were actually reactivations of old deep-seated landslides after land use changes. Therefore, this study was conducted (1) to explore the importance of environmental factors controlling landslide occurrence and (2) to estimate future landslide susceptibility. A landslide inventory map of the study area derived from aerial photograph interpretation and field checks shows the location of 57 landslides and six zones with multiple landslides, mainly complex slides and debris flows. In total 14.8% of the area is affected by an old landslide. For the landslide susceptibility modelling, weights of evidence (WofE), was applied and five different models were produced. After comparison of the models and spatial validation using Receiver Operating Characteristic curves and Kappa values, a model combining data on elevation, hillslope gradient, aspect, geology and distance to faults was selected. This model confirmed our hypothesis that deep-seated landslides are located on hillslopes with a moderate slope gradient (i.e. 5°–13°). The depletion areas are expected on and along the border of plateaus where weathered basalts rich in smectite clays are found, and the landslide debris is expected to accumulate on the Amba Aradam sandstone and upper Antalo limestone. As future landslides are believed to occur on inherently unstable hillslopes similar to those where deep-seated landslides occurred, the classified landslide susceptibility map allows delineating zones where human interventions decreasing slope stability might cause slope failures. The results obtained demonstrate that the applied methodology could be used in similar areas where information on the location of landslides is essential for present-day hazard analysis.  相似文献   

5.
Landslide hazard mapping is a fundamental tool for disaster management activities in mountainous terrains. The main purpose of this study is to evaluate the predictive power of weights-of-evidence modelling in landslide hazard assessment in the Lesser Himalaya of Nepal. The modelling was performed within a geographical information system (GIS), to derive a landslide hazard map of the south-western marginal hills of the Kathmandu Valley. Thematic maps representing various factors (e.g., slope, aspect, relief, flow accumulation, distance to drainage, soil depth, engineering soil type, landuse, geology, distance to road and extreme one-day rainfall) that are related to landslide activity were generated, using field data and GIS techniques, at a scale of 1:10,000. Landslide events of the 1970s, 1980s, and 1990s were used to assess the Bayesian probability of landslides in each cell unit with respect to the causative factors. To assess the accuracy of the resulting landslide hazard map, it was correlated with a map of landslides triggered by the 2002 extreme rainfall events. The accuracy of the map was evaluated by various techniques, including the area under the curve, success rate and prediction rate. The resulting landslide hazard value calculated from the old landslide data showed a prediction accuracy of > 80%. The analysis suggests that geomorphological and human-related factors play significant roles in determining the probability value, while geological factors play only minor roles. Finally, after the rectification of the landslide hazard values of the new landslides using those of the old landslides, a landslide hazard map with > 88% prediction accuracy was prepared. The methodology appears to have extensive applicability to the Lesser Himalaya of Nepal, with the limitation that the model's performance is contingent on the availability of data from past landslides.  相似文献   

6.
This paper is focused primarily on how to represent landslide scarp areas, how to analyze results achieved by the application of specific strategies of representation and how to compare the outcomes derived by different tests, within a general framework related to landslide susceptibility assessment. These topics are analyzed taking into account the scale of data survey (1:10,000) and the role of a landslide susceptibility map into projects targeted toward the definition of prediction, prevention, and mitigation measures, in a wider context of civil protection planning. These aims are achieved by using ArcSDM (Arc Spatial Data Modeler), a software extension to ArcView GIS useful for developing spatial prediction models using regional datasets. This extension requires a representation by points of the investigated problems (landslide susceptibility, aquifer vulnerability, detection of mineral deposits, identification of natural habitats of animals, and plants, etc.). Maps of spatial evidence from regional geological and geomorphological datasets were used to generate maps showing susceptibility to slope failures in two different study areas, located in the northern Apennines and in the central Alps (Italy), respectively. The final susceptibility maps for both study areas were derived by the application of the weights-of-evidence (WofE) modeling technique. By this method a series of subjective decisions were required, strongly dependent on an understanding of the natural processes under study, supported by statistical analysis of the spatial associations between known landslides and evidential themes. Except for maps of attitude, permeability, and structure, that were not available for both study areas, the other data were the same and comprised geological, land use, slope, and internal relief maps. The paper illustrates how different representations of scarp areas by points (in terms of different number of points) did not greatly influence the final response map, considering the scale of this work. On the contrary, some differences were observed in the capability of the model to describe the relations between predictor variables and landslides. In effect, a representation of the scarp areas using one point every 50 m led to a more efficient model able to better define relationships of this type. It avoided both problems of redundancy of information, deriving by the use of too many points, and problems related to a random positioning of the centroid. Moreover, it permitted to minimize the uncertainty related with identification and mapping of landslides.  相似文献   

7.
Comparison of satellite and air photo based landslide susceptibility maps   总被引：4，自引：1，他引：4  
Landslide susceptibility maps can be prepared in a variety of ways. Many geoscientists favour the use of an overlay model approach in which several map layers are combined by some arithmetic rules to determine the potential for sliding in an area or region. The resulting susceptibility maps, although based on a subjective weighting of relevant factors, can often be of high accuracy and utility. In order to obtain the relevant input data for this type of analysis, remotely sensed data are often used. To date, susceptibility mapping, just as the mapping of historic and individual landslides, has tended to require higher-resolution imagery. This has somewhat limited the application of landslide susceptibility mapping. While high-resolution air photo or satellite imagery is superior to lower resolution imagery for the purpose of mapping of historic and individual landslides, such higher levels of resolution may not be required for the development of landslide susceptibility maps. In order to determine if medium-resolution satellite imagery, such as SPOT or ASTER, could provide the needed data for landslide susceptibility mapping, a comparison was undertaken of landslide susceptibility model output resulting from the use of stereo NAPP aerial photography versus the use of data obtained from stereo SPOT imagery. The test area selected for this study consisted of two watersheds, Pena Canyon and Big Rock Canyon, situated west of Santa Monica, California, USA, along the Pacific Coast Highway. Both watersheds have a long and well-documented history of landslide activity and sufficient geologic variability and complexity to provide a good test site. The specific overlay model used in this evaluation required input data consistent with the needs of many other models of this type. The model output derived from the two different data sources and presented here in the form of susceptibility maps were virtually identical. Statistical and difference analysis confirmed that both methods of obtaining input data provide similar results and successfully identified landslide prone areas. These results suggest that satellite imagery, in this instance, SPOT images, could potentially be used in lieu of conventional air photos, to evaluate landslide susceptibility. In many situations, especially in the case of remote locations and/or developing countries, this capability should result in substantial savings in terms of time, financial resources, and overall viability.  相似文献   

8.
Landslide hazard assessment, effected by means of geostatistical methods, is based on the analysis of the relationships between landslides and the spatial distributions of some instability factors. Frequently such analyses are based on landslide inventories in which each record represents the entire unstable area and is managed as a single instability landform. In this research, landslide susceptibility is evaluated through the study of a variety of instability landforms: landslides, scarps and areas uphill from crown. The instability factors selected were: bedrock lithology, steepness, topographic wetness index and stream power index. The instability landform densities computed for all the factors, which were arranged in Unique Condition Unit, allowed us to derive a total of three prediction images for each landslide typology. The role of the instability factors and the effects generated by the use of different landforms were analyzed by means of: a) bivariate analysis of the relationships between factors and landslide density; b) predictive power validations of the prediction images, based on a random partition strategy.The test area was the Iato River Basin (North-Western Sicily), whose slopes are moderately involved in flow and rotational slide landslides (219 and 28, respectively). The area is mainly made up of the following complexes: Numidian Flysch clays (19%, 1%), Terravecchia sandy clays (5%, 1%), Terravecchia clayey sands (3%, 0.3%) and San Cipirello marly clays (9%, 0%). The steepness parameter shows the highest landslide density in the [11–19°] class for both the typologies (8%, 1%), even if the density distributions for rotational slides are right-asymmetric and right-shifted. We obtained significant differences in shape when we used different instability landforms. Unlike scarps and areas uphill from crowns, landslide areas produce left-asymmetric and left-shifted density distributions for both the typologies. As far as the topographic wetness index is concerned, much more pronounced differences were detected among the instability landforms of rotational slides. In contrast, the flow landslides produce normal-like density distributions. The latter and the rotational slide landslide areas produce the highest density values in the class [5.5–6.7], despite an abrupt decreasing trend starting from the first class [3.2–4.4], which is generated by the density values of the rotational slide scarps and areas uphill from crowns. The stream power index at the foot of the slopes, which was automatically derived using a GIS-procedure, shows a positive correlation with the landslide densities marked by the maximum classes: [4.8–6.0] for flows, and [6.0–7.2] for rotational slides. The validation procedure results confirmed that the choice of instability landform influences the results of the susceptibility analysis. Furthermore, the validation procedure indicates that: a) the predictive models are generally satisfactory; b) scarps and zones uphill from crown areas are the most diagnostically unstable landforms, for flow and rotational slide landslides respectively.  相似文献   

9.
Comparing landslide inventory maps   总被引：10，自引：1，他引：9  
Landslide inventory maps are effective and easily understandable products for both experts, such as geomorphologists, and for non experts, including decision-makers, planners, and civil defense managers. Landslide inventories are essential to understand the evolution of landscapes, and to ascertain landslide susceptibility and hazard. Despite landslide maps being compiled every year in the word at different scales, limited efforts are made to critically compare landslide maps prepared using different techniques or by different investigators. Based on the experience gained in 20 years of landslide mapping in Italy, and on the limited literature on landslide inventory assessment, we propose a general framework for the quantitative comparison of landslide inventory maps. To test the proposed framework we exploit three inventory maps. The first map is a reconnaissance landslide inventory prepared for the Umbria region, in central Italy. The second map is a detailed geomorphological landslide map, also prepared for the Umbria region. The third map is a multi-temporal landslide inventory compiled for the Collazzone area, in central Umbria. Results of the experiment allow for establishing how well the individual inventories describe the location, type and abundance of landslides, to what extent the landslide maps can be used to determine the frequency-area statistics of the slope failures, and the significance of the inventory maps as predictors of landslide susceptibility. We further use the results obtained in the Collazzone area to estimate the quality and completeness of the two regional landslide inventory maps, and to outline general advantages and limitations of the techniques used to complete the inventories.  相似文献   

10.
This paper proposes a statistical decision-tree model to analyze landslide susceptibility in a wide area of the Akaishi Mountains, Japan. The objectives of this study were to validate the decision-tree model by comparing landslide susceptibility and actual landslide occurrence, and to reveal the relationships among landslide occurrence, topography, and geology. Landslide susceptibility was examined through ensemble learning with a decision tree. Decision trees are advantageous in that estimation processes and order of important explanatory variables are explicitly represented by the tree structures. Topographic characteristics (elevation, slope angle, profile curvature, plan curvature, and dissection and undissection height) and geological data were used as the explanatory variables. These topographic characteristics were calculated from digital elevation models (DEMs). The objective variables were landslide occurrence and reactivation data between 1992 and 2002 that were depicted by satellite image analysis. Landslide susceptibility was validated by comparing actual data on landslides that occurred and reactivated after the model was constructed (between 2002 and 2004).This study revealed that, from 2002 to 2004, landslides tended to occur and reactivate in catchments with high landslide susceptibility. The landslide susceptibility map thus depicts the actual landslide occurrence and reactivation in the Akaishi Mountains. This result indicates that the decision-tree model has appropriate accuracy for estimating the probabilities of future landslides. The tree structure indicates that landslides occurred and reactivated frequently in the catchments that had an average slope angle exceeding ca. 29° and a mode of slope angle exceeding 33°, which agree well with previous studies. A decision tree also quantitatively expresses important explanatory variables at the higher order of the tree structure.  相似文献   

11.
Spatially and temporally distributed modeling of landslide susceptibility   总被引：8，自引：1，他引：8  
Mapping of landslide susceptibility in forested watersheds is important for management decisions. In forested watersheds, especially in mountainous areas, the spatial distribution of relevant parameters for landslide prediction is often unavailable. This paper presents a GIS-based modeling approach that includes representation of the uncertainty and variability inherent in parameters. In this approach, grid-based tools are used to integrate the Soil Moisture Routing (SMR) model and infinite slope model with probabilistic analysis. The SMR model is a daily water balance model that simulates the hydrology of forested watersheds by combining climate data, a digital elevation model, soil, and land use data. The infinite slope model is used for slope stability analysis and determining the factor of safety for a slope. Monte Carlo simulation is used to incorporate the variability of input parameters and account for uncertainties associated with the evaluation of landslide susceptibility. This integrated approach of dynamic slope stability analysis was applied to the 72-km2 Pete King watershed located in the Clearwater National Forest in north-central Idaho, USA, where landslides have occurred. A 30-year simulation was performed beginning with the existing vegetation covers that represented the watershed during the landslide year. Comparison of the GIS-based approach with existing models (FSmet and SHALSTAB) showed better precision of landslides based on the ratio of correctly identified landslides to susceptible areas. Analysis of landslide susceptibility showed that (1) the proportion of susceptible and non-susceptible cells changes spatially and temporally, (2) changed cells were a function of effective precipitation and soil storage amount, and (3) cell stability increased over time especially for clear-cut areas as root strength increased and vegetation transitioned to regenerated forest. Our modeling results showed that landslide susceptibility is strongly influenced by natural processes and human activities in space and time; while results from simulated outputs show the potential for decision-making in effective forest planning by using various management scenarios and controlling factors that influence landslide susceptibility. Such a process-based tool could be used to deal with real-dynamic systems to help decision-makers to answer complex landslide susceptibility questions.  相似文献   

12.
Landslide inventory maps are necessary for assessing landslide hazards and addressing the role slope stability plays in landscape evolution over geologic timescales. However, landslide inventory maps produced with traditional methods — aerial photograph interpretation, topographic map analysis, and field inspection — are often subjective and incomplete. The increasing availability of high-resolution topographic data acquired via airborne Light Detection and Ranging (LiDAR) over broad swaths of terrain invites new, automated landslide mapping procedures. We present two methods of spectral analysis that utilize LiDAR-derived digital elevation models of the Puget Sound lowlands, Washington, and the Tualatin Mountains, Oregon, to quantify and automatically map the topographic signatures of deep-seated landslides. Power spectra produced using the two-dimensional discrete Fourier transform and the two-dimensional continuous wavelet transform identify the characteristic spatial frequencies of deep-seated landslide morphologic features such as hummocky topography, scarps, and displaced blocks of material. Spatial patterns in the amount of spectral power concentrated in these characteristic frequency bands highlight past slope instabilities and allow the delineation of landslide terrain. When calibrated by comparison with detailed, independently compiled landslide inventory maps, our algorithms correctly classify an average of 82% of the terrain in our five study areas. Spectral analysis also allows the creation of dominant wavelength maps, which prove useful in analyzing meter-scale topographic expressions of landslide mechanics, past landslide activity, and landslide-modifying geomorphic processes. These results suggest that our automated landslide mapping methods can create accurate landslide maps and serve as effective, objective, and efficient tools for digital terrain analysis.  相似文献   

13.
Geomorphological information can be combined with decision-support tools to assess landslide hazard and risk. A heuristic model was applied to a rural municipality in eastern Cuba. The study is based on a terrain mapping units (TMU) map, generated at 1:50,000 scale by interpretation of aerial photos, satellite images and field data. Information describing 603 terrain units was collected in a database. Landslide areas were mapped in detail to classify the different failure types and parts. Three major landslide regions are recognized in the study area: coastal hills with rockfalls, shallow debris flows and old rotational rockslides denudational slopes in limestone, with very large deep-seated rockslides related to tectonic activity and the Sierra de Caujerí scarp, with large rockslides. The Caujerí scarp presents the highest hazard, with recent landslides and various signs of active processes. The different landforms and the causative factors for landslides were analyzed and used to develop the heuristic model. The model is based on weights assigned by expert judgment and organized in a number of components such as slope angle, internal relief, slope shape, geological formation, active faults, distance to drainage, distance to springs, geomorphological subunits and existing landslide zones. From these variables a hierarchical heuristic model was applied in which three levels of weights were designed for classes, variables, and criteria. The model combines all weights into a single hazard value for each pixel of the landslide hazard map. The hazard map was then divided by two scales, one with three classes for disaster managers and one with 10 detailed hazard classes for technical staff. The range of weight values and the number of existing landslides is registered for each class. The resulting increasing landslide density with higher hazard classes indicates that the output map is reliable. The landslide hazard map was used in combination with existing information on buildings and infrastructure to prepare a qualitative risk map. The complete lack of historical landslide information and geotechnical data precludes the development of quantitative deterministic or probabilistic models.  相似文献   

14.
Landslide inventories are routinely compiled by means of aerial photo interpretation (API). When examining photo pairs, the forest canopy (notably in old-growth forest) hides a population of “not visible” landslides. In the present study, we attempt to estimate how important is the contribution of landslides not detectable from aerial photographs to the global mass of sediment production from mass failures on forested terrain of the Capilano basin, coastal British Columbia. API was coupled with intensive fieldwork for identification and measurement of all landslides. A 30-year framework was adopted. We show that “not visible” landslides can represent up to 85% of the total number of failures and account for 30% of the volume of debris mobilised. Such percentages display high sub-basin variability with rates of sediment production varying by one order of magnitude between two sub-basins of the study area. This is explained qualitatively by GIS-based analysis of slope frequency distributions, drainage density, and spatial distribution of surficial materials. Such observations find further support in the definitions of transport-limited and supply-limited basins. As a practical consideration to land managers, we envisage that supplementary fieldwork for landslide identification is mandatory in transport-limited systems only. Fieldwork has demonstrated that gully-related failures have a greater importance than one could expect from API.  相似文献   

15.
Sometimes regional meteorological anomalies trigger different types of mass movements. In May 1998, the western Black Sea region of Turkey experienced such a meteorological anomaly. Numerous residential and agricultural areas and engineering lifelines were buried under the flood waters. Besides the reactivation of many previously delineated landslides, thousands of small-scale landslides (mostly the earthflow type) occurred all over the region. The earthflows were mainly developed in flysch-type units, which have already presented high landslide concentrations. In this study, three different catchments — namely Agustu, Egerci, and Kelemen — were selected because they have the most landslide-prone geological units of the region. The purposes of the present study are to put forward the spatial distributions of the shallow earthflows triggered, to describe the possible factors conditioning the earthflows, and to produce the shallow earthflow susceptibility maps of the three catchments. The unique condition units (UCU) were employed during the production of susceptibility maps and during statistical analyses. The unique condition units numbered 4052 for the Agustu catchment, 13,241 for the Egerci catchment and 12,314 for the Kelemen catchment. The earthflow intensity is the highest in the Agustu catchment (0.038 flow/UCU) and lowest in the Egerci catchment (0.0035 flow/UCU). Logistic regression analyses were also employed. However, during the analyses, some difficulties were encountered. To overcome the difficulties, a series of sensitivity analyses were performed based on some decision rules introduced in the present study. Considering the decision rules, the proper ratios of UCU free from earthflow (0) / UCU including the earthflow (1) for the Agustu, Egerci and Kelemen catchments were obtained as 3, 6, and 5, respectively. Also, a chart for the proper ratio selection was developed. The regression equations from the selected ratios were then applied to the entire catchment and the earthflow susceptibility maps were produced. The landslide susceptibility maps revealed that 15% of the Agustu catchment, 8% of the Egerci catchment, and 7% of the Kelemen catchment have very high earthflow susceptibility; and most of the earthflows triggered by the May 1998 meteorological event were found in the very high susceptibility zones.  相似文献   

16.
Chun-Hung Wu  Su-Chin Chen   《Geomorphology》2009,112(3-4):190-204
This work provides a landslide susceptibility assessment model for rainfall-induced landslides in Central Taiwan based on the analytical hierarchy process method. The model considers rainfall and six site factors, including slope, geology, vegetation, soil moisture, road development and historical landslides. The rainfall factor consists of 10-day antecedent rainfall and total rainfall during a rainfall event. Landslide susceptibility values are calculated for both before and after the beginning of a rainfall event. The 175 landslide cases with detailed field surveys are used to determine a landslide-susceptibility threshold value of 9.0. When a landslide susceptibility assessment value exceeds the threshold value, slope failure is likely to occur. Three zones with different landslide susceptibility levels (below, slightly above, and far above the threshold) are identified. The 9149 landslides caused by Typhoon Toraji in Central Taiwan are utilized to validate the study's result. Approximately, 0.2%, 0.4% and 15.3% of the typhoon-caused landslides are located in the three landslide susceptibility zones, respectively. Three villages with 6.6%, 0.4% and 4.9% of the landslides respectively are used to validate the accuracy of the landslide susceptibility map and analyze the main causes of landslides. The landslide susceptibility assessment model can be used to evaluate susceptibility relative to accumulated rainfall, and is useful as an early warning and landslide monitoring tool.  相似文献   

17.
During the last decade the frequency of landslides at river valley slopes eroding into the glaciolacustrine plain in western Estonia has grown considerably. We studied in detail nine recent landslides out of 25 known and recorded sliding events in the area. All landslides occurred at the river banks in otherwise almost entirely flat areas of proglacial deposits capped with marine sands. Glaciolacustrine varved clay is the weakest soil type in the area and holds the largest landslides. Slope stability modelling shows that critical slope gradient for the clay is ≥ 10° and for the marine sand ≥ 20°. Fluvial erosion is the main process in decreasing slope stability at the outer bends of the river meanders. An extra shear stress generated by groundwater flow following the high stand of the groundwater level or rapid water level drawdown in the river channels are responsible for triggering the landslides. Consecutive occurrence of small-scale slides has a direct effect in triggering the large, retrogressive complexes of slides in the glaciolacustrine clay. A landslide hazard zonation map was composed based on digital elevation model and the data on spatial distribution of glaciolacustrine clays and marine sands, and on existing and critical slope angles of these deposits.  相似文献   

18.
Since European settlement 160 years ago, much of the indigenous forest in New Zealand hill country has been cleared for pastoral agriculture, resulting in increased erosion and sedimentation. To prioritise soil conservation work in the Manawatu–Wanganui region, we developed a model of landslide susceptibility. It assigns high susceptibility to steep land not protected by woody vegetation and low susceptibility everywhere else, following the commonly used approach for identifying inappropriate land use. A major storm on 15–16 February 2004 that produced many landslides was used to validate the model. The model predicted hills at risk to landsliding with moderate accuracy: 58% of erosion scars in the February storm occurred on hillsides considered to be susceptible. The model concept of slope thresholds, above which the probability of landsliding is high and below which the probability is low, is not adequate because below 30° the probability of landsliding is approximately linearly related to slope. Thus, reforestation of steep slopes will need to be combined with improved vegetation management for soil conservation on moderate slopes to significantly reduce future landsliding.  相似文献   

19.
Landslide susceptibility zonation in the Rio Mendoza Valley, Argentina   总被引：3，自引：4，他引：3  
A qualitative landslide susceptibility zonation map (scale 1:100,000) of a sector of the Río Mendoza Valley was prepared by overlapping thematic maps of conditioning factors. The main parameters affecting the distribution of landslides in the area were ranked according to slope instability. Geomorphological surveys and field observations enabled identification of 300 historical or prehistoric landslides. A landslide inventory was developed classifying the processes involved in slope instability, and analysing the degree of activity. The two most influential factors in decreasing slope stability were lithology and slope angle.  相似文献   

20.
Sanjit K. Deb  Aly I. El-Kadi   《Geomorphology》2009,108(3-4):219-233
The deterministic Stability INdex MAPping (SINMAP) model, which integrates a mechanistic infinite-slope stability model and a hydrological model, was applied to assess susceptibility of slopes in 32 shallow-landslide-prone watersheds of the eastern to southern areas of Oahu, Hawaii, USA. Input to the model includes a 10-m Digital Elevation Model (DEM), an inventory of storm-induced landslides that occurred from 1949 to 2006, and listings of soil-strength and hydrological parameters including transmissivity and steady-state recharge. The study area of ca. 384 km2 was divided into four calibration regions with different geotechnical and hydrological characteristics. All parameter values were separately calibrated using observed landslides as references. The study used a quasi-dynamic scenario of soil wetness resulting from extreme daily rainfall events with a return period of 50 years. The return period was based on almost-90-year-long (1919–2007) daily rainfall records from 26 raingauge stations in the study area. Output of the SINMAP model includes slope-stability-index-distribution maps, slope-versus-specific-catchment-area charts, and statistical summaries for each region.The SINMAP model assessed susceptibility at the locations of all 226 observed shallow landslides and classified these susceptible areas as unstable. About 55% of the study area was predicted as highly unstable, highlighting a critical island problem. The SINMAP predictions were compared to an existing debris-flow-hazard map. Areas classified as unstable in the current study were classified as low-to-moderate and moderate-to-high debris-flow hazard risks by the prior mapping. The slope-stability maps provided by this study will aid in explaining the causes of known landslides, making emergency decisions, and, ultimately mitigating future landslide risks. The maps may be further improved by incorporating heterogeneous and anisotropic soil properties and spatial and temporal variation of rainfalls as well as by improving the accuracy of the DEM and the locations of shallow landslide initiation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号