首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Classic sequence stratigraphy suggests depositional sequences can form due to changes in accommodation and due to changes in sediment supply. Accommodation‐dominated sequences are problematic to define rigorously, but are commonly interpreted from outcrop and subsurface data. In contrast, supply‐dominated sequences are much less commonly identified. We employ numerical stratigraphic forward modelling to compare stratal geometries forced by cyclic changes in relative sea level with stratal geometries forced by sediment discharge and water discharge changes. Our quantitative results suggest that both relative sea‐level oscillations and variations in sediment/water discharge ratio are able to form sequence‐bounding unconformities independently, confirming previous qualitative sequences definitions. In some of the experiments, the two types of sequence share several characteristics, such as an absence of coastal‐plain topset deposits and stratal offlap, something typically interpreted as the result of falling relative sea level. However, the stratal geometries differ when variations in amplitude and frequency of relative sea‐level change, sediment/water discharge ratio, transport diffusion coefficient and initial bathymetry are applied. We propose that the supply‐dominated sequences could be recognised in outcrop or in the subsurface if the observations of stratal offlap and the absence of coastal‐plain topset can be made without any strong evidence of relative sea‐level fall (e.g. descending shoreline trajectory). These quantitative results suggest that both supply‐dominated and accommodation‐dominated sequences are likely to occur in the ancient record, as a consequence of multiple, possibly complex, controls.  相似文献   

2.
The non‐unique variability highlighted by Burgess & Prince (Basin Res. 2015, 27 , 351) (i.e. the origin and timing of maximum flooding surfaces, maximum regressive surfaces and subaerial unconformities; the process of topset aggradation in relation with the various types of shoreline trajectory; and the multiple controls that may affect the progradation and retrogradation of a shoreline) is irrelevant to the workflow of sequence stratigraphy. What is relevant is the observation of the unique stratal geometries that are diagnostic to the definition of all units and surfaces of sequence stratigraphy. In downstream‐controlled settings, these unique stratal stacking patterns relate to the forced regressive, normal regressive and transgressive shoreline trajectories. Multiple controls interplay during the formation of each type of stacking pattern, including accommodation, sediment supply and the energy of the sediment‐transport agents. This interplay explains the non‐unique variability, but does not change the unique criteria that afford a consistent application of sequence stratigraphy. Failure to rationalize the non‐unique variability within the context of unique stratal geometries is counterproductive, and obscures the simple workflow of sequence stratigraphy.  相似文献   

3.
Sequence‐stratigraphic models for fourth to sixth order, glacio‐eustatic sequences based only on relative sea‐level variations result in simplified and potentially false interpretations. Glacio‐eustatic sea‐level variations form only one aspect of cyclic climate variation; other aspects, such as variations in fluvial water discharge, vegetation cover, weathering and sediment supply can lead to variable sediment yield, thus adding complexity to sequence‐stratigraphic patterns normally attributed to sea‐level variations. Analogue flume models show a significant impact of water discharge on the timing and character of sequence boundaries, and on changes in the relative importance of systems tracts, as expressed in sediment volumes. Four deltas, generated under the influence of an identical sea‐level curve, and affected by different water‐discharge cycles were generated in the Eurotank facility: (1) constant discharge; (2) high‐frequency discharge variations (HFD); (3) discharge leading sea level by a quarter phase; (4) discharge lagging sea level by a quarter phase. HFD shift the parasequence stacking pattern consistently but do not alter large‐scale delta architecture. Water‐discharge changes that lead sea‐level changes result in high sediment yield during sea‐level rise and in the poor development of maximum flooding surfaces. Delta‐front erosion during sea‐level fall is expressed by multiple, small channels related to upstream avulsions, and does not result in an incised valley that efficiently routs sediment to the shelf edge. When water‐discharge changes lag sea‐level changes, sediment yield is high during falling sea level and results in rapid progradation during forced regression. Erosion from incised valleys is strong on the proximal delta top and dissipates towards the delta front. The combination of high discharge and sea‐level fall provides the most efficient mode of valley incision and sediment transport to the shelf edge. During sea‐level rise, low water discharge results in sediment starvation and well‐developed maximum flooding surfaces. Water‐discharge variations thus alter sequence‐stratigraphic patterns and provide an alternative explanation to the amplitude of sea‐level fall for generating either type 1 or 2 erosional unconformities.  相似文献   

4.
Abstract Simple elastic plate models have been used to determine the stratigraphic patterns that result from prograding sediment loads. The predicted patterns, which include coastal offlap/onlap and downlap in a basinward direction, are generally similar to observations of stratal geometry from Cenozoic sequences of the U.S. Atlantic and Gulf Coast margins. Coastal offlap is a feature of all models in which the water depth and elastic thickness of the lithosphere, T e (which is a measure of the long-term strength of the lithosphere), are held constant, and is caused by a seaward shift in the sediment load and its compensation as progradation proceeds. The coastal offlap pattern is reduced if sediments prograde into a subsiding basin, since subsidence causes an increase in the accommodation space and loading landward of a prograding wedge. The stratal geometry that results is complex, however, and depends on the sediment supply, the amount of subsidence, and T e. If the sediment supply to a subsiding basin proceeds in distinct 'pulses' (due, say, to different tectonic events in a source region) then it is possible to determine the relationship between stratal geometry and T e. Coastal offlap and downlap are features of most models where the lithosphere either has a constant T e slowly increases Te with time, or changes T e laterally; however, in the case where sediments prograde onto lithosphere that rapidly increases T e with rime, the offlap can be replaced by onlap. Lithospheric flexure due to prograding sediment loads is capable of producing a wide variety of stratal geometries and may therefore be an important factor to take into account when evaluating the relative role of tectonics and eustatic sea-level changes in controlling the stratigraphic record.  相似文献   

5.
Understanding the relationship between sedimentation and tectonics is critical to the analysis of stratigraphic evolution in foreland basins. Previous models of foreland basins have explained stratal development, but were done generally under the assumption that steady allogenic forcing produces a steady stratigraphic response. They did not consider autogenic shoreline behaviour during the development of the subsidence pattern characteristic of foreland basins. We present a mathematical model and flume experiments that explore how subsidence and sediment‐supply rates control the shoreline trajectory and the stratal patterns that fill foreland basins. Through these models, we found differing autogenic responses in the rate and direction of shoreline migration, and these generated three distinct styles of stratal architecture, despite the constant external forcing (i.e. constant sediment discharge and basin substrate tilting). The first response was ‘autoretreat’, where shoreline migration switched from initial progradation to retrogradation. The second response was progradation followed by constant aggradation of the shoreline. The third response was maintained progradation with a markedly accelerating rate. We termed this latter newly observed autogenic behaviour ‘shoreline autoacceleration’. These three modes of shoreline behaviour and their accompanying stratal architecture provide a basic framework for the relationship between sedimentation and tectonic activity in foreland basins under the simplified conditions presented here.  相似文献   

6.
《Basin Research》2018,30(4):783-798
When we model fluvial sedimentation and the resultant alluvial stratigraphy, we typically focus on the effects of local parameters (e.g., sediment flux, water discharge, grain size) and the effects of regional changes in boundary conditions applied in the source region (i.e., climate, tectonics) and at the shoreline (i.e., sea level). In recent years this viewpoint has been codified into the “source‐to‐sink” paradigm, wherein major shifts in sediment flux, grain‐size fining trends, channel‐stacking patterns, floodplain deposition and larger stratigraphic systems tracts are interpreted in terms of (1) tectonic and climatic signals originating in the hinterland that propagate downstream; and (2) eustatic fluctuation, which affects the position of the shoreline and dictates the generation of accommodation. Within this paradigm, eustasy represents the sole means by which downstream processes may affect terrestrial depositional systems. Here, we detail three experimental cases in which coastal rivers are strongly influenced by offshore and slope transport systems via the clinoform geometries typical of prograding sedimentary bodies. These examples illustrate an underdeveloped, but potentially important “sink‐to‐source” influence on the evolution of fluvial‐deltaic systems. The experiments illustrate the effects of (1) submarine hyperpycnal flows, (2) submarine delta front failure events, and (3) deformable substrates within prodelta and offshore settings. These submarine processes generate (1) erosional knickpoints in coastal rivers, (2) increased river channel occupancy times, (3) rapid rates of shoreline movement, and (4) localized zones of significant offshore sediment accumulation. Ramifications for coastal plain and deltaic stratigraphic patterns include changes in the hierarchy of scour surfaces, fluvial sand‐body geometries, reconstruction of sea‐level variability and large‐scale stratal geometries, all of which are linked to the identification and interpretation of sequences and systems tracts.  相似文献   

7.
ABSTRACT Quantitative evaluation of fluvial response to allogenic controls is crucial for further progress in understanding the stratigraphic record in terms of processes that control landscape evolution. For instance, without quantitative insight into time lags that are known to exist between sea‐level change and fluvial response, there is no way to relate fluvial stratigraphy to the sea‐level curve. It is difficult to put firm constraints on these time‐lag relationships on the basis of empirical studies. Therefore, we have started to quantify time‐averaged erosion and deposition in the fluvial and offshore realms in response to sea‐level change by means of analogue modelling in a 4 × 8‐m flume tank. The rate of sea‐level change was chosen as an independent variable, with other factors such as sediment supply, discharge and initial geometry kept constant over the course of 18 experiments. Our experimental results support the common view that neither fall nor rise in sea level affects the upstream fluvial system instantaneously. An important cause for the delayed fluvial response is that a certain amount of time is required to connect initial incisions on the newly emergent shelf (canyons) with the fluvial valley. Lowering of the fluvial longitudinal profile starts only after the connection of an active shelf canyon with the fluvial valley; until that moment the profile remains steady. We quantified the process of connection and introduced the quantity ‘connection rate’. It controlled, in conjunction with the rate of sea‐level fall: (1) the amount of fluvial degradation during sea‐level fall; (2) the total sediment volume that bypasses the shelf edge; (3) the percentage of fluvial relative to shelf sediment in the lowstand delta; (4) the volume of the transgressive systems tract and (5) the amount of diachroneity along the sequence boundary. Our experiments demonstrate also that the sequence‐stratigraphic concept is difficult to apply to continental successions, even when these successions have been deposited within the influence of sea level.  相似文献   

8.
《Basin Research》2018,30(Z1):15-35
Nearly all successions of the near‐shore strata exhibit cyclical movements of the shoreline, which have commonly been attributed to cyclical oscillations in relative sea level (combining eustasy and subsidence) or, more rarely, to cyclical variations in sediment supply. It has become accepted that cyclical change in sediment delivery from source catchments may lead to cyclical movement of boundaries such as the gravel front, particularly in the proximal segments of sediment‐routing systems. In order to quantitatively assess how variations in sediment transport as a consequence of change in relative sea‐level and surface run‐off control stratigraphic architecture, we develop a simple numerical model of sediment transport and explore the sensitivity of moving boundaries within the sediment‐routing system to change in upstream (sediment flux, precipitation rate) and downstream (sea level) controls. We find that downstream controls impact the shoreline and sand front, while the upstream controls can impact the whole system depending on the amplitude of change in sediment flux and precipitation rate. The model implies that under certain conditions, the relative movement of the gravel front and shoreline is a diagnostic marker of whether the sediment‐routing system experienced oscillations in sea level or climatic conditions. The model is then used to assess the controls on stratigraphic architecture in a well‐documented palaeo‐sediment‐routing system in the Late Cretaceous Western Interior Seaway of North America. Model results suggest that significant movement of the gravel front is forced by pronounced (±50%) oscillations in precipitation rate. The absence of such movement in gravel front position in the studied strata implies that time‐equivalent movement of the shoreline was driven by relative sea‐level change. We suggest that tracking the relative trajectories of internal boundaries such as the gravel front and shoreline is a powerful tool in constraining the interpretation of stratigraphic sequences.  相似文献   

9.
This paper describes a new 3‐D forward numerical model (CARBONATE 3D) that simulates the stratigraphic and sedimentological development of carbonate platforms and mixed carbonate–siliciclastic shelves by simulating the following sedimentary processes: (1) Carbonate shallow, open‐marine production, dependent on water depth, restriction and sediment input; (2) Carbonate shallow, restricted‐marine production, dependent on water restriction; (3) Pelagic sediment production and deposition; (4) Coarse and fine siliciclastic input; (5) Erosion, transport and redeposition of sediment, dependent on currents, slope, depth and restriction as well as sediment grain‐size and composition; (6) Dissolution of subaerially exposed carbonate. In this paper the model is used to investigate the controlling mechanisms on the sequence stratigraphy of isolated carbonate platforms and atolls and to predict distinctive architectural signatures from different drowning mechanisms. Investigation of the mechanisms controlling atoll strata shows that although relative sea‐level is the major control, antecedent topography, environmental setting and early diagenesis have profound influence on what stratigraphic geometries and facies develop. Hence care must be taken if sea‐level curves are interpreted from real stratigraphies. Atoll drowning by fast sea‐level rise, by lowered production and by repeated exposure and fast subsequent sea‐level rises are investigated and different stratigraphic signatures for the respective mechanisms predicted. A fast relative sea‐level rise results in a bucket‐shaped morphology developed prior to drowning and a sharp transition from the platform margin facies to a pelagic cover. Drowning caused by lowered platform margin production is predicted to result in the development of a dome‐shaped, shallow‐water shoal over the whole platform top prior to drowning. Fourth order amplitudes of several tens of metres, typical of ‘icehouse’ settings, cause atoll drowning at subsidence rates where atolls subject to fourth order amplitude of only a few metres, typical of ‘greenhouse’ settings, can keep up with the rising sea‐level. In the resultant strata, vertical facies belts are less well developed but horizontally extensive facies bands are more prominent. High fourth order amplitudes (up to 80 m) without sufficient third order scale subsidence will not lead to drowning, however, as the platform can recover in each fourth order lowstand. These results suggest that atolls might be easier to drown in ‘icehouse’ rather than in ‘greenhouse’ conditions but only in situations with suitably high rates of longer‐term relative sea‐level rise or sufficient lag times.  相似文献   

10.
Reconstructions of grain-size trends in alluvial deposits can be used to understand the dominant controls on stratal architecture in a foreland basin. Different initial values of sediment supply, tectonic subsidence and base-level rise are investigated to constrain their influence on stratal geometry using the observed grain-size trends as a proxy of the goodness of fit of the numerical results to the observed data. Detailed measurements of grain-size trends, palaeocurrent indicators, facies and thickness trends, channel geometries and palynological analyses were compiled for the middle Campanian Castlegate Sandstone of the Book Cliffs and its conglomerate units in the Gunnison and Wasatch plateaus of central Utah. They define the initial conditions for a numerical study of the interactions between large-scale foreland basin and small-scale sediment transport processes. From previous studies, the proximal foreland deposits are interpreted as recording a middle Campanian thrusting event along the Sevier orogenic belt, while the stratal architecture in the Book Cliffs region is interpreted to be controlled by eustatic fluctuation with local tectonic influence. Model results of stratal geometry, using a subsidence curve with a maximum rate of ≈45 m Myr?1 for the northern Wasatch Plateau region predict the observed grain-size trends through the northern Book Cliffs. A subsidence curve with a maximum rate of ≈30 m Myr?1 in the Gunnison–Wasatch Plateaus best reproduces the observed grain-size trends in the southern transect through the southern Wasatch Plateau. Eustasy is commonly cited as controlling Castlegate deposition east of the Book Cliffs region. A eustatic rise of 45 m Myr?1 produces grain-size patterns that are similar to the observed, but a rate of eustatic rise based on Haq et al. (1988) will not produce the observed stratal architecture or grain-size trends. Tectonic subsidence alone, or a combined rate of tectonic subsidence and a Haq et al. (1988) eustatic rise, can explain the stratal and grain-size variations in the proximal and downstream regions.  相似文献   

11.
This article deals with the stratigraphic record of a climatic or tectonic perturbation of an experimental coupled catchment‐fan system. Following Bonnet & Crave's results (2003), which suggest that it is possible to differentiate between climatic or tectonic causes of surface uplift of an erosional topography from the record of sediment flux output, we design a new experimental device to test this proposition in the sedimentary signal. This device allows the study of a coupled erosion–sedimentation system at the laboratory scale for given and changing uplift and rainfall rates. On the basis of experimental results, we propose a methodology to study alluvial fan architecture from large‐scale geometries to stacking pattern and sequence analysis. In these experiments, the erosional perturbation resulting from climate or tectonic forcing induces a typical dynamic in terms of both sediment supply and the ratio between the sediment and water supply, which controls the transport capacity. The four possible forcings (rainfall rate and uplift rate increase or decrease, respectively) then result in unique dynamics of the combined parameters such as the fan slope, apex aggradation, mean sedimentation rate, grain size distribution, bed thickness and frequency and facies stacking. We first analyse large‐scale geometries (onlap, toplap, downlap or truncation) and then fine‐scale sedimentological features (fining, thinning, coarsening, thickening) in order to discriminate the nature of the forcing. This conceptual model could be adapted to real world alluvial fans in order to recognize and separate the driving mechanisms from each other.  相似文献   

12.
Geometric analysis shows that the angle of migration of coastal sedimentary facies is a function of the relative sea-level change and the thickness of sediment deposited or eroded. The angle of facies migration compared to the slopes on the sediment surface determines the degree of facies preservation and stratigraphic relationships to the surrounding facies. Vertical facies successions generated by radial migration of environments show a great deal of variety because the sediment surface in both marine and non-marine areas is concave-up. Both regressive and transgressive sequences with non-erosive marine-nonmarine contacts can be generated. Transgression at a slightly lower angle can form a ravinement surface cut on non-marine deposits with onlapping barrier sands or shallow marine deposits. Regression with relative sea-level drop generates a minor erosion surface with baselapping isolated shoreline deposits. Disequilibrium conditions occur when sea level varies at a rate exceeding the ability of the system to supply or redistribute sediment, with resulting changes in surficial slopes. Onlapping and downlapping stratal relationships across erosion surfaces result because of differences in slopes between marine and non-marine environments. These discontinuities are generally less than one degree, but could possibly be recognized on high quality multichannel seismic lines. Most of these discontinuities are probably not regionally extensive enough to be regarded as sequence boundaries. Tectonic tilting or differential subsidence of strata during depositional hiatuses is necessary to generate true regional unconformities or sequence boundaries. Where facies climb with respect to horizontal, erosion surfaces produced only by this migration may cut across lithostratigraphic units at higher angles, up to 3 or 4 degrees. Low-angle erosion surfaces relevant to the scales of sequence stratigraphic studies may result only from facies migration, even during a period of relative sea-level rise.  相似文献   

13.
The thickness and distribution of early syn‐rift deposits record the evolution of structures accommodating the earliest phases of continental extension. However, our understanding of the detailed tectono‐sedimentary evolution of these deposits is poor, because in the subsurface, they are often deeply buried and below seismic resolution and sparsely sampled by borehole data. Furthermore, early syn‐rift deposits are typically poorly exposed in the field, being buried beneath thick, late syn‐rift and post‐rift deposits. To improve our understanding of the tectono‐sedimentary development of early syn‐rift strata during the initial stages of rifting, we examined quasi‐3D exposures in the Abura Graben, Suez Rift, Egypt. During the earliest stage of extension, forced folding above blind normal fault segments, rather than half‐graben formation adjacent to surface‐breaking faults, controlled rift physiography, accommodation development and the stratigraphic architecture of non‐marine, early syn‐rift deposits. Fluvial systems incised into underlying pre‐rift deposits and were structurally focused in the axis of the embryonic depocentre, which, at this time, was characterized by a fold‐bound syncline rather than a fault‐bound half graben. During this earliest phase of extension, sediment was sourced from the rift shoulder some 3 km to the NE of the depocentre, rather than from the crests of the flanking, intra‐basin extensional forced folds. Fault‐driven subsidence, perhaps augmented by a eustatic sea‐level rise, resulted in basin deepening and the deposition of a series of fluvial‐dominated mouth bars, which, like the preceding fluvial systems, were structurally pinned within the axis of the growing depocentre, which was still bound by extensional forced folds rather than faults. The extensional forced folds were eventually locally breached by surface‐breaking faults, resulting in the establishment of a half graben, basin deepening and the deposition of shallow marine sandstone and fan‐delta conglomerates. Because growth folding and faulting were coeval along‐strike, syn‐rift stratal units deposited at this time show a highly variable along‐strike stratigraphic architecture, locally thinning towards the growth fold but, only a few kilometres along‐strike, thickening towards the surface‐breaking fault. Despite displaying the classic early syn‐rift stratigraphic motif recording net upward‐deepening, extensional forced folding rather than surface faulting played a key role in controlling basin physiography, accommodation development, and syn‐rift stratal architecture and facies development during the early stages of extension. This structural and stratigraphic observations required to make this interpretation are relatively subtle and may go unrecognized in low‐resolution subsurface data sets.  相似文献   

14.
The role of spatiotemporally varying tectonic forcing in the development of stratigraphic patterns along passive margins and continental rift basins has been recognized for decades, but the exact nature of the stratigraphic response is still debated. This study develops a coupled tectonic‐stratigraphic numerical model with a fixed absolute lake level and constant climate conditions to quantify the signatures of spatiotemporally varying tectonic forcing on the stratigraphic record. This model consists of a three‐dimensional rift basin with a range of geomorphic features and produces a number of well‐recognized stratigraphic patterns, which are commonly interpreted to be caused by lake‐/sea‐level or climate fluctuations. This study demonstrates that the shoreline and grain‐size front are decoupled through the adjustment of the depositional slope and sediment dispersal under spatiotemporally varying tectonic forcing, especially in underfilled basins. Under such a decoupled situation, the pathway of the migrating subsidence centre correlates with the pathway of the grain‐size front, a result of competition between spatiotemporally varying tectonic forcing and autogenic sediment transport. The model results also highlight the significance of three‐dimensional variability in the stratigraphic response to tectonic forcing, which may be overlooked or misinterpreted and suggests a high degree of uncertainty in re‐establishing the base‐level cycles from the stratigraphic record alone. Moreover, spectral analysis of the modelled stratigraphy and tectonic forcing suggests that low‐frequency tectonic signals are more likely to be recorded in the stratigraphy with a lag time, whereas high‐frequency tectonic signals are likely to be shredded, mixed with autogenic signals, or buffered through sediment‐routing systems. Finally, quantitative measurements of the stratigraphic architecture of the Nanpu sag in the Bohai Bay Basin, China are used to tune the numerical model of this study to illustrate how to evaluate the role of tectonic forcing on the development of characteristic stratigraphic sequences.  相似文献   

15.
A Bayesian approach to inverse modelling of stratigraphy, part 1: method   总被引：2，自引：0，他引：2  
The inference of ancient environmental conditions from their preserved response in the sedimentary record still remains an outstanding issue in stratigraphy. Since the 1970s, conceptual stratigraphic models (e.g. sequence stratigraphy) based on the underlying assumption that accommodation space is the critical control on stratigraphic architecture have been widely used. Although these methods considered more recently other possible parameters such as sediment supply and transport efficiency, they still lack in taking into account the full range of possible parameters, processes, and their complex interactions that control stratigraphic architecture. In this contribution, we present a new quantitative method for the inference of key environmental parameters (specifically sediment supply and relative sea level) that control stratigraphy. The approach combines a fully non‐linear inversion scheme with a ‘process–response’ forward model of stratigraphy. We formulate the inverse problem using a Bayesian framework in order to sample the full range of possible solutions and explicitly build in prior geological knowledge. Our methodology combines Reversible Jump Markov chain Monte Carlo and Simulated Tempering algorithms which are able to deal with variable‐dimensional inverse problems and multi‐modal posterior probability distributions, respectively. The inverse scheme has been linked to a forward stratigraphic model, BARSIM (developed by Joep Storms, University of Delft), which simulates shallow‐marine wave/storm‐dominated systems over geological timescales. This link requires the construction of a likelihood function to quantify the agreement between simulated and observed data of different types (e.g. sediment age and thickness, grain size distributions). The technique has been tested and validated with synthetic data, in which all the parameters are specified to produce a ‘perfect’ simulation, although we add noise to these synthetic data for subsequent testing of the inverse modelling approach. These tests addressed convergence and computational‐overhead issues, and highlight the robustness of the inverse scheme, which is able to assess the full range of uncertainties on the inferred environmental parameters and facies distributions.  相似文献   

16.
Two types of depositional sequences can be defined within the sequence stratigraphic framework: the parasequence and the high‐frequency sequence. Both sequences consist of stacked regressive and transgressive deposits. However, a parasequence forms under conditions of overall sea‐level rise, whereas a high‐frequency sequence forms as the sea level oscillates which results in typical forced regressive deposits during sea‐level fall. Both depositional sequences may develop over comparable temporal (10–100 kyr) and spatial (1–20 km wide and 1–40 m thick) scales. Numerical modelling is used to compare the architecture, preservation potential, internal volumes, bounding surfaces, condensed and expanded sections and facies assemblages of parasequences and high‐frequency sequences. Deposits originating from transgression are less pronounced than their regressive counterparts and consist of either preserved backbarrier deposits or shelf deposits. Shoreface deposits are not preserved during transgression. The second half of the paper evaluates in detail the preservation potential of backbarrier deposits and proposes a mechanism that explains the occurrence of both continuous and discontinuous barrier retreat in terms of varying rates of sea‐level rise and sediment supply. The key to this mechanism is the maximum washover capacity, which plays a part in both barrier shoreline retreat and backbarrier‐lagoonal shoreline retreat. If these two shorelines are not balanced, then the retreat of the coastal system as a whole is discontinuous and in time barrier overstep may take place.  相似文献   

17.
ABSTRACT There is continued interest in how the rate of relative sea‐level rise [A ( > 0)] and the rate of sediment supply [S] function during the growth and evolution of deltaic shorelines. The theory of shoreline autoretreat, recently corroborated in flume experiments, claims that (1) A( > 0) and S can never be in equilibrium, and (2) shoreline or shelf‐edge progradation inevitably turns to retrogradation, when relative sea level is rising even modestly and even if A/S = const (> 0). Autoretreat arises because the area of the clinoform surface of the delta (or shelf edge) per kilometer of shoreline must increase as the relative sea level rises, and the delta (or shelf edge) progrades into deeper water. A finite sediment supply rate is thus liable to become inadequate to sustain progradation. The problem increases further as a rising sea level also greatly increases the delta‐plain volume that needs to be filled, further limiting the progradation of the system. The fundamental trajectory of shoreline migration is thus one characterized by a concave‐landward shape, even under the steady forcing of the basin. The magnitudes of A (> 0) and S, or A/S do not determine whether the landward turnaround of the shoreline is realized or not, but affect merely the length and height of the fundamental trajectory curve. Thus, any attempt to detect and interpret temporal changes in A and S from the observed stratigraphic record of shoreline trajectory needs first to take full account of the inbuilt autoretreat mechanism. We develop here a simple, semi‐quantitative method of reconstructing the basin conditions (A and S) from the stratigraphic record of prograding deltaic shorelines (or prograding shelf‐margin clinoforms) on the basis of the theory of shoreline autoretreat. The deterministic nature of the autoretreat theory is advantageous in managing this latter issue, because any expected or unexpected change emerges as some discrepancy from a trajectory that was predicted for the initial conditions. The autoretreat theory also provides a convenient graphical method of dealing with the uncertainty of the field data, and with evaluating the accuracy of any reconstruction. Our methodology has been developed to deal with the behaviour of deltaic shorelines, but is basically applicable to any clinoform system, the development of which is affected by relative sea level. The suggested method is applied to an Early Eocene (Ypresian) regressive shoreline succession in the Central Tertiary Basin on Spitsbergen. The studied regressive wedge developed as a delta‐driven, progradational shelf‐margin system under a regime of overall (i.e. long‐term) rise of relative sea level, but also suffered short‐term sea‐level falls associated with valley incisions on the coastal plain and shelf. On the assumption that S was constant or was steadily decreasing, the analysis of field data obtained from three sites within the basin suggests that the initial water depth in the basin was around 0.45 km, and that the overall relative sea‐level rise (c. 0.80 km) happened largely during an early time period and was followed by a longer period of much lower rate of rise. This pattern of relative sea‐level rise is consistent with the Palaeogene tectonic subsidence trend of the basin which was determined independently through a geohistory analysis. The uncertainty of the field data does not negate our reconstruction. The combined effects of autoretreat and A/S changes on a deltaic shoreline trajectory are confirmed through the development of an autoretreat‐based methodology. Conventional sequence stratigraphic models that assume a possible equilibrium condition between A and S are both conceptually misleading and insufficient to analyse basin conditions quantitatively. Sequence stratigraphic analyses of shorelines need to incorporate the autoretreat concept.  相似文献   

18.
The adequate documentation and interpretation of regional‐scale stratigraphic surfaces is paramount to establish correlations between continental and shallow marine strata. However, this is often challenged by the amalgamated nature of low‐accommodation settings and control of backwater hydraulics on fluvio‐deltaic stratigraphy. Exhumed examples of full‐transect depositional profiles across river‐to‐delta systems are key to improve our understanding about interacting controlling factors and resultant stratigraphy. This study utilizes the ~400 km transect of the Cenomanian Mesa Rica Sandstone (Dakota Group, USA), which allows mapping of down‐dip changes in facies, thickness distribution, fluvial architecture and spatial extent of stratigraphic surfaces. The two sandstone units of the Mesa Rica Sandstone represent contemporaneous fluvio‐deltaic deposition in the Tucumcari sub‐basin (Western Interior Basin) during two regressive phases. Multivalley deposits pass down‐dip into single‐story channel sandstones and eventually into contemporaneous distributary channels and delta‐front strata. Down‐dip changes reflect accommodation decrease towards the paleoshoreline at the Tucumcari basin rim, and subsequent expansion into the basin. Additionally, multi‐storey channel deposits bound by erosional composite scours incise into underlying deltaic deposits. These represent incised‐valley fill deposits, based on their regional occurrence, estimated channel tops below the surrounding topographic surface and coeval downstepping delta‐front geometries. This opposes criteria offered to differentiate incised valleys from flood‐induced backwater scours. As the incised valleys evidence relative sea‐level fall and flood‐induced backwater scours do not, the interpretation of incised valleys impacts sequence stratigraphic interpretations. The erosional composite surface below fluvial strata in the continental realm represents a sequence boundary/regional composite scour (RCS). The RCS’ diachronous nature demonstrates that its down‐dip equivalent disperses into several surfaces in the marine part of the depositional system, which challenges the idea of a single, correlatable surface. Formation of a regional composite scour in the fluvial realm throughout a relative sea‐level cycle highlights that erosion and deposition occur virtually contemporaneously at any point along the depositional profile. This contradicts stratigraphic models that interpret low‐accommodation settings to dominantly promote bypass, especially during forced regressions. Source‐to‐sink analyses should account for this in order to adequately resolve timing and volume of sediment storage in the system throughout a complete relative sea‐level cycle.  相似文献   

19.
Sea‐level changes provide an important control on the interplay between accommodation space and sediment supply, in particular, for shallow‐water basins where the available space is limited. Sediment exchange between connected basins separated by a subaqueous sill (bathymetric threshold) is still not well understood. When sea‐level falls below the bathymetric level of this separating sill, the shallow‐water basin evolution is controlled by its erosion and rapid fill. Once this marginal basin is filled, the sedimentary depocenter shifts to the open marine basin (outward shift). With new accommodation space created during the subsequent sea‐level rise, sediment depocenter shifts backwards to the marginal basin (inward shift). This new conceptual model is tested here in the context of Late Miocene to Quaternary evolution of the open connection between Dacian and Black Sea basins. By the means of seismic sequence stratigraphic analysis of the Miocene‐Pliocene evolution of this Eastern Paratethys domain, this case study demonstrates these shifts in sedimentary depocenter between basins. An outward shift occurs with a delay that corresponds to the time required to fill the remaining accommodation space in the Dacian Basin below the sill that separates it from the Black Sea. This study provides novel insight on the amplitude and sedimentary geometry of the Messinian Salinity Crisis (MSC) event in the Black Sea. A large (1.3–1.7 km) sea‐level drop is demonstrated by quantifying coeval sedimentation patterns that change to mass‐flows and turbiditic deposits in the deep‐sea part of this main sink. The post‐MSC sediment routing continued into the present‐day pattern of Black Sea rivers discharge.  相似文献   

20.
We analyzed the latest Early Cretaceous to Miocene sections (～110–7 Ma) in 11 New Jersey and Delaware onshore coreholes (Ocean Drilling Program Legs 150X and 174AX). Fifteen to seventeen Late Cretaceous and 39–40 Cenozoic sequence boundaries were identified on the basis of physical and temporal breaks. Within‐sequence changes follow predictable patterns with thin transgressive and thick regressive highstand systems tracts. The few lowstands encountered provide critical constraints on the range of sea‐level fall. We estimated paleowater depths by integrating lithofacies and biofacies analyses and determined ages using integrated biostratigraphy and strontium isotopic stratigraphy. These datasets were backstripped to provide a sea‐level estimate for the past ～100 Myr. Large river systems affected New Jersey during the Cretaceous and latest Oligocene–Miocene. Facies evolved through eight depositional phases controlled by changes in accommodation, long‐term sea level, and sediment supply: (1) the Barremian–earliest Cenomanian consisted of anastomosing riverine environments associated with warm climates, high sediment supply, and high accommodation; (2) the Cenomanian–early Turonian was dominated by marine sediments with minor deltaic influence associated with long‐term (107 year) sea‐level rise; (3) the late Turonian through Coniacian was dominated by alluvial and delta plain systems associated with long‐term sea‐level fall; (4) the Santonian–Campanian consisted of marine deposition under the influence of a wave‐dominated delta associated with a long‐term sea‐level rise and increased sediment supply; (5) Maastrichtian–Eocene deposition consisted primarily of starved siliciclastic, carbonate ramp shelf environments associated with very high long‐term sea level and low sediment supply; (6) the late Eocene–Oligocene was a starved siliciclastic shelf associated with moderately high sea‐level and low sediment supply; (7) late early–middle Miocene consisted of a prograding shelf under a strong wave‐dominated deltaic influence associated with major increase in sediment supply and accommodation due to local sediment loading; and (8) over the past 10 Myr, low accommodation and eroded coastal systems were associated with low long‐term sea level and low rates of sediment supply due to bypassing.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号