共查询到20条相似文献，搜索用时 15 毫秒
1.
Abstract SEASAT altimetric measurements are used to determine the gravity anomalies across two passive continental margins: the western margin of the Rockall Plateau, UK, and the Exmouth Plateau off north-west Australia. The small gravity anomalies observed over the starved western margin of the Rockall Plateau require the existence of a major density contrast within the crust, as well as the Moho, and show that the elastic thickness is less than 5 km at the time of rifting. The gravity anomaly over the Exmouth Plateau is compared with the gravity anomaly calculated from the sediment loading of a thin elastic plate, taking account of the variation in crustal thickness. This comparison shows that the Exmouth Plateau also has a small effective elastic thickness of 5 km, even for loads emplaced between 60 and 120 Myr after rifting. Elastic thicknesses of about 5 km have also been reported for other sedimentary basins, and are to be expected if the rheological properties of the crust and mantle depend on the ratio of the present temperature to the melting temperature. Flexural effects are therefore likely to be of minor importance in sedimentary basins. 相似文献
2.
Three-dimensional gravity inversion for Moho depth at rifted continental margins incorporating a lithosphere thermal gravity anomaly correction 总被引：1，自引：0，他引：1
This paper describes a method for determining Moho depth, lithosphere thinning factor (γ= 1 − 1/β) and the location of the ocean–continent transition at rifted continental margins using 3-D gravity inversion which includes a correction for the large negative lithosphere thermal gravity anomaly within continental margin lithosphere. The lateral density changes caused by the elevated geotherm in thinned continental margin and adjacent ocean basin lithosphere produce a significant lithosphere thermal gravity anomaly which may be in excess of −100 mGal, and for which a correction must be made in order to determine Moho depth accurately from gravity inversion. We describe a method of iteratively calculating the lithosphere thermal gravity anomaly using a lithosphere thermal model to give the present-day temperature field from which we calculate the lithosphere thermal density and gravity anomalies. For continental margin lithosphere, the lithosphere thermal perturbation is calculated from the lithosphere thinning factor (γ= 1 − 1/β) obtained from crustal thinning determined by gravity inversion and breakup age for thermal re-equilibration time. For oceanic lithosphere, the lithosphere thermal model used to predict the lithosphere thermal gravity anomaly may be conditioned using ocean isochrons from plate reconstruction models to provide the age and location of oceanic lithosphere. A correction is made for crustal melt addition due to decompression melting during continental breakup and seafloor spreading. We investigate the sensitivity of the lithosphere thermal gravity anomaly and the predicted Moho depth from gravity inversion at continental rifted margins to the methods used to calculate and condition the lithosphere thermal model using both synthetic models and examples from the North Atlantic. 相似文献
3.
G S Kimbell R W Gatliff† J D Ritchie† A S D Walker J P Williamson 《Basin Research》2004,16(2):259-278
A series of three‐dimensional models has been constructed for the structure of the crust and upper mantle over a large region spanning the NE Atlantic passive margin. These incorporate isostatic and flexural principles, together with gravity modelling and integration with seismic interpretations. An initial isostatic model was based on known bathymetric/topographic variations, an estimate of the thickness and density of the sedimentary cover, and upper mantle densities based on thermal modelling. The thickness of the crystalline crust in this model was adjusted to equalise the load at a compensation depth lying below the zone of lateral mantle density variations. Flexural backstripping was used to derive alternative models which tested the effect of varying the strength of the lithosphere during sediment loading. The models were analysed by comparing calculated and observed gravity fields and by calibrating the predicted geometries against independent (primarily seismic) evidence. Further models were generated in which the thickness of the sedimentary layer and the crystalline crust were modified in order to improve the fit to observed gravity anomalies. The potential effects of igneous underplating and variable upper mantle depletion were explored by a series of sensitivity trials. The results provide a new regional lithospheric framework for the margin and a means of setting more detailed, local investigations in their regional context. The flexural modelling suggests lateral variations in the strength of the lithosphere, with much of the margin being relatively weak but areas such as the Porcupine Basin and parts of the Rockall Basin having greater strength. Observed differences between the model Moho and seismic Moho along the continental margin can be interpreted in terms of underplating. A Moho discrepancy to the northwest of Scotland is ascribed to uplift caused by a region of upper mantle with anomalously low density, which may be associated with depletion or with a temperature anomaly. 相似文献
4.
A global particle swarm optimization (GPSO) technique is developed and applied to the inversion of residual gravity anomalies caused by buried bodies with simple geometry (spheres, horizontal, and vertical cylinders). Inversion parameters, such as density contrast of geometries, radius of body, depth of body, location of anomaly, and shape factor, were optimized. The GPSO algorithm was tested on noise-free synthetic data, synthetic data with 10% Gaussian noise, and five field examples from different parts of the world. The present study shows that the GPSO method is able to determine all the model parameters accurately even when shape factor is allowed to change in the optimization problem. However, the shape was fixed a priori in order to obtain the most consistent appraisal of various model parameters. For synthetic data without noise or with 10% Gaussian noise, estimates of different parameters were very close to the actual model parameters. For the field examples, the inversion results showed excellent agreement with results from previous studies that used other inverse techniques. The computation time for the GPSO procedure is very short (less than 1 s) for a swarm size of less than 50. The advantage of the GPSO method is that it is extremely fast and does not require assumptions about the shape of the source of the residual gravity anomaly. 相似文献
5.
The Canary Archipelago is an intraplate volcanic chain, located near the West African continental margin, emplaced on old oceanic lithosphere of Jurassic age, with an extended volcanic activity since Middle Miocene. The adjacent seafloor does not show the broad oceanic swell usually observed in hotspot-generated oceanic islands. However, the observation of a noticeable depth anomaly in the basement west of the Canaries might indicate that the swell is masked by a thick sedimentary cover and the influence of the Canarian volcanism. We use a spectral approach, based on coherence analysis, to determine the swell and its compensation mechanism. The coherence between gravity and topography indicates that the swell is caused by a subsurface load correlated with the surface volcanic load. The residual gravity/geoid anomaly indicates that the subsurface load extends 600 km SSW and 800 km N and NNE of the islands. We used computed depth anomalies from available deep seismic profiles to constrain the extent and amplitude of the basement uplift caused by a relatively low-density anomaly within the lithospheric mantle, and coherence analysis to constrain the elastic thickness of the lithosphere ( Te ) and the compensation depth of the swell. Depth anomalies and coherence are well simulated with Te =28–36 km, compensation depth of 40–65 km, and a negative density contrast within the lithosphere of ∼33 kg m−3 . The density contrast corresponds to a temperature increment of ∼325°C, which we interpret to be partially maintained by a low-viscosity convective layer in the lowermost lithosphere, and which probably involves the shallower parts of the asthenosphere. This interpretation does not require a significant rejuvenation of the mechanical properties of the lithosphere. 相似文献
6.
C. C. Tscherning 《Geophysical Journal International》1979,59(1):147-153
Summary. The anomalous (gravitational) potential of the Earth, T , is split in two parts, T= T C + T M . Here T M is a harmonic function generated by known mass density anomalies and T C =T-T M . This function will also be a harmonic function, which therefore may be approximated using the method of collocation, based on known gravity anomalies or altimeter derived geoid undulations, for example. Gravity anomalies can then be predicted using the known linearized relationship between T and Δ g . This procedure may give a 40–50 per cent increase in the precision of the prediction results as compared to a procedure where mass density anomalies are not taken into account. 相似文献
7.
Summary. Six gravity and bathymetry profiles perpendicular to the Kane fracture zone, each more than 300 km long, were gathered to study the variation in crustal structure in the vicinity of a major fracture zone and the gravitational edge effect at the contact between lithosphere of two different ages. A spectral analysis of the gravity and bathymetric series as a function of wavelength shows that the gravitational edge effect is only significant at the longest wavelengths. For remaining wavelengths the admittance, the ratio of the amplitude of the gravity anomaly to the amplitude of the bathymetry, is best explained by a model of isostasy in which topographic loads are partially supported by the flexural rigidity of an elastic plate, about 6 km in thickness. After subtracting the gravitational attraction of the bathymetry and its compensation, substantial isostatic anomalies remain. We interpret these anomalies as being caused by variations in crustal thickness which have little correlation with surface topography, except at very long wavelengths. The apparent crustal thickness varies by as much as a factor of 2, but there is no evidence indicating systematic thinning of the crust beneath the fracture zone. Our data do suggest that such density variations within the plate are also compensated by the isostatic response of an elastic plate but with very different effect from those at the surface. This indicates that there are two different modes of crustal formation with different gravity and topographic signatures: effusive volcanism which loads the surface of the elastic plate producing both topographic relief and coherent gravity anomalies, and intrusive volcanism or underplating producing gravity anomalies but little topographic relief. 相似文献
8.
《Basin Research》2018,30(4):799-815
Since the last century, several geological and geophysical studies have been developed in the Santiago Basin to understand its morphology and tectonic evolution. However, some uncertainties regarding sedimentary fill properties and possible density anomalies below the sediments/basement boundary remain. Considering that this is an area densely populated with more than 6 million inhabitants in a highly active seismotectonic environment, the physical properties of the Santiago Basin are important to study the geological and structural evolution of the Andean forearc and to characterize its seismic response and related seismic hazard. Two and three‐dimensional gravimetric models were developed, based on a database of 797 compiled and 883 newly acquired gravity stations. To produce a well‐constrained basement elevation model, a review of 499 wells and 30 transient electromagnetic soundings were used, which contribute with basement depth or minimum sedimentary thickness information. For the 2‐D modelling, a total of 49 gravimetric profiles were processed considering a homogeneous density contrast and independent regional trends. A strong positive gravity anomaly was observed in the centre of the basin, which complicated the modelling process but was carefully addressed with the available constrains. The resulting basement elevation models show complex basement geometry with, at least, eight recognizable depocenters with maximum sedimentary infill of ~ 500 m. The 3‐D density models show alignments in the basement that correlates well with important intrusive units of the Cenozoic and Mesozoic. Along with interpreted fault zones westwards and eastwards of the basin, the observations suggest a structural control of Santiago basin geometry, where recent deformation associated with the Andean contractional deformation front and old structures developed during the Cenozoic extension are superimposed to the variability of river erosion/deposition processes. 相似文献
9.
10.
Zuzana Alasonati Ta&#;árová 《Geophysical Journal International》2007,170(3):995-1014
The Southern Andes differ significantly from the Central Andes with respect to topography and crustal structures and are, from a geophysical point of view, less well known. In order to provide insight into the along-strike segmentation of the Andean mountain belt, an integrated 3-D density model was developed for the area between latitudes 36°S and 42°S. The model is based on geophysical and geological data acquired in the region over the past years and was constructed using forward density modelling. In general, the gravity field of the South American margin is characterized by a relatively continuous positive anomaly along the coastline and the forearc region, and by negative anomalies along the trench and the volcanic arc. However, in the forearc region of the central part of the study area, located just to the south of the epicentre of the largest ever recorded earthquake (Valdivia, 1960), the trench-parallel positive anomaly is disrupted. The forearc gravity anomaly differences thus allow the study area to be divided into three segments, the northern Arauco-Lonquimay, the middle Valdivia-Liquiñe, and the southern Bahía-Mansa-Osorno segment, which are also evident in geology. In the proposed model, the observed negative gravity anomaly in the middle segment is reproduced by an approximately 5 km greater depth to the top of the slab beneath the forearc region. The depth to the slab is, however, dependent upon the density of the upper plate structures. Therefore, both the upper and lower plates and their interaction have a significant impact on the subduction-zone gravity field. 相似文献
11.
Results of magnetotelluric and gravimetric measurements in western Nicaragua, Central America 总被引：1，自引：0，他引：1
Magnetotelluric and gravity data have been collected within a ca. 170 km long traverse running from the Pacific coast of Nicaragua in the west to the Nicaraguan Highland in the east. This part of Nicaragua is characterized by sedimentary rocks of the Pacific Coastal Plain, separated from the Tertiary volcanic rocks of the Highland by the NW-SE-trending Nicaraguan Depression. 2-D interpretation of the magnetotelluric (MT) data, collected at 13 stations, indicates four regions of high electrical conductivity in addition to the conductive coastal region. Two of these are associated with conducting sediments and pyroclastics in the upper part of the crust. Two other conductive structures have been defined at depth around 20 km and the one best defined is located below the depression. From the distribution of seismic events, volcanic activity in the depression and the similarity in geophysical characteristics with areas such as the Rio Grande Rift, this conductor is interpreted as a melt layer or a complex of magma chambers. Models of the upper lithosphere, constrained by the MT model, vertical electrical sounding (VES) data, seismic data and densities, have been tested using gravity data. A model that passes this test shows a gradual thickening of the crust eastwards from the Pacific coast. An anomaly centred over the depression is interpreted to have its origin in a thinning of the crust. In this model the melt layer is situated on top of the bulge of the lower lithosphere. A change in the composition of the crust, from the Pacific Coastal Plain to the Highland, is indicated from the change in character of the MT response and from the density distribution in the gravity model. This may support the hypothesis that the Pacific region is an accreted terrane. MT and gravity data indicate a depth to a resistive and high-density basement in the depression of ca. 2 km. On the basis of this, the vertical setting in the depression is estimated to be of the order of 2.5 km. 相似文献
12.
Gravimetric determination of an intrusive complex under the Island of Faial (Azores): some methodological improvements 总被引：2，自引：0，他引：2
Antonio G. Camacho J. Carlos Nunes Esther Ortiz Zilda França Ricardo Vieira 《Geophysical Journal International》2007,171(1):478-494
We present some improvements of a gravity inversion method to determine the geometry of the anomalous bodies for priori density contrasts. The 3-D method is based on an exploratory process applied, not for the global model, but for the steps of a growth approach. The (positive and/or negative) anomalous structure is described by successive aggregation of cells, while its corresponding gravity field remains nearly proportional to the observed one. Moreover, a simple (e.g. linear) regional trend can be simultaneously adjusted. The corresponding program is applied to new gravity data on the volcanic island of Faial (Azores archipelago). The inversion approach shows a subsurface anomalous structure for the island, the main feature being an elongated high-density body. The body is interpreted as a compact sheeted dyke swarm, emplaced along Faial-Pico Fracture Zone, a leaky transform structure that forms the current boundary between Eurasian and African plates in the Azores area. The new results in this paper are (1) a Bouguer gravity anomaly map, (2) several improvements in the inversion process (robust process, optimal balance fitness/model magnitude), (3) a new gravimetric method for estimating the mean terrain density, (4) a 3-D model for subsurface mass anomalies in Faial and (5) some interpretative conclusions about a main intrusive complex detected under the island as a wall-like structure extending from a depth of 0.5 to 6 km b.s.l., with a N100°E trend and corresponding to an early fissural volcanic episode controlled by the regional tectonics. 相似文献
13.
重力资料结合磁性体埋深计算和地震折射资料的分析 ,表明在南极半岛和东南极克拉通之间的菲尔希内尔和罗纳冰架之下存在一减薄的地壳。推测该区地壳的减薄主要由南极半岛和东南极克拉通之间的近东西向拉张作用所造成 ,该作用很可能发生在陆架盆地发展的早期。 相似文献
14.
We show the numerical applicability of a multiresolution method based on harmonic splines on the 3-D ball which allows the regularized recovery of the harmonic part of the Earth's mass density distribution out of different types of gravity data, for example, different radial derivatives of the potential, at various positions which need not be located on a common sphere. This approximated harmonic density can be combined with its orthogonal anharmonic complement, for example, determined out of the splitting function of free oscillations, to an approximation of the whole mass density function. The applicability of the presented tool is demonstrated by several test calculations based on simulated gravity values derived from EGM96. The method yields a multiresolution in the sense that the localization of the constructed spline basis functions can be increased which yields in combination with more data a higher resolution of the resulting spline. Moreover, we show that a locally improved data situation allows a highly resolved recovery in this particular area in combination with a coarse approximation elsewhere which is an essential advantage of this method, for example, compared to polynomial approximation. 相似文献
15.
Summary. A technique for rapid calculation of the vertical gravitational attraction of three-dimensional axially symmetric bodies using the one-dimensional Fast Fourier Transform (FFT) is presented and discussed. The calculation is rapid, efficient and accurate, and requires only a simple linear array to describe the body shape. This method is most useful for calculation of the gravity effect of long-wavelength bodies such as oceanic seamounts or sedimentary basins and for the gravity effect of annular bodies such as up-warped sedimentary strata around a salt diapir. 相似文献
16.
17.
Summary. A new Bouguer anomaly map of India and its generalized interpretation is presented in this paper. Bouguer anomalies in India show good correlation with the geology and tectonics. Isostatic anomalies in India are primarily geologic anomalies caused by intracrustal inhomogeneities. For example, the negative isostatic anomalies in southern India arise from large thicknesses of granitic bodies in the upper crust and the positive anomaly over the Himalaya may be attributed to a possible thickening of the basalt layer in the lower crust. The gravity data suggest that an overall isostatic equilibrium generally prevails in India and the Himalayan region. Crustal thickness estimates from DSS data in India are comparable to the values obtained from gravity data based on the Ahy's concept of isostatic compensation. 相似文献
18.
K. Babour 《Geophysical Journal International》1977,51(1):265-269
In previous papers, we showed how we found it possible to define the anomalous field by means of its horizontal components defined as the difference between the field recorded at a reference station and that recorded at stations on the anomaly. In the present short note, we extend this definition to the vertical component. We compare the previous results with those obtained by characterizing the anomaly by the total vertical component and by the differential vertical component. This comparison leads us to conclude that the differential components are more effective than the total vertical component for delineating an anomaly. 相似文献
19.
The relationship between seismic velocity and density in the continental crust — a useful constraint? 总被引：1，自引：0，他引：1
P. J. Barton 《Geophysical Journal International》1986,87(1):195-208
Summary . Plots of seismic velocity and density of rock samples show that a range of densities is possible for rocks of each seismic velocity and vice versa. although a single linear relationship is often assumed in crustal gravity calculations. Because of the scatter, whenever rocks of known seismic velocity are converted to density using this relationship, a reduction is made to the resolving power of the resulting gravity calculation. If these rocks reach thicknesses of more than a few kilometres, then the uncertainties become significant when compared with the size of commonly observed gravity anomalies. Examples are considered from the North Sea, Mississippi and Carolina Trough. It is concluded that the use of a seismic velocity measurement as the only indication of rock density does not provide a useful constraint when attempting to reproduce observed gravity variations. An appropriate model for isostatic compensation is probably the most important factor for successful predictions of crustal structure on the basis of gravity data. 相似文献
20.
Gravity anomalies, subsidence history and the tectonic evolution of the Malay and Penyu Basins (offshore Peninsular Malaysia) 总被引：2，自引：0，他引：2
The tectonic subsidence and gravity anomalies in the Malay and Penyu Basins, offshore Peninsular Malaysia, were analysed to determine the isostatic compensation mechanism in order to investigate their origin. These continental extensional basins contain up to 14 km of sediment fill which implies that the crust had been thinned significantly during basin development. Our results suggest, however, that the tectonic subsidence in the basins cannot be explained simply by crustal thinning and Airy isostatic compensation.
The Malay and Penyu Basins are characterized by broad negative free-air gravity anomalies of between −20 and −30 mGal. To determine the cause of the anomaly, we modelled four gravity profiles across the basins using a method that combines two-dimensional flexural backstripping and gravity modelling techniques. We assumed a model of uniform lithospheric stretching and Airy isostasy in the analysis of tectonic subsidence. Our study shows that the basins are probably underlain by relatively thinned crust, indicating that some form of crustal stretching was involved. To explain the observed gravity anomalies, however, the Moho depth that we calculated based on the free-air gravity data is about 25% deeper than the Moho predicted by assuming Airy isostasy (Backstrip Moho). This suggests that the Airy model overestimates the compensation and that the basins are probably undercompensated isostatically. In other words, there is an extra amount of tectonic subsidence that is not compensated by crustal thinning, which has resulted in the discrepancy between the gravity-derived Moho and the Backstrip Moho. We attribute this uncompensated or anomalous tectonic subsidence to thin-skinned crustal extension that did not involve the mantle lithosphere. The Malay and Penyu Basins are interpreted therefore as basins that formed by a combination of whole-lithosphere stretching and thin-skinned crustal extension. 相似文献
The Malay and Penyu Basins are characterized by broad negative free-air gravity anomalies of between −20 and −30 mGal. To determine the cause of the anomaly, we modelled four gravity profiles across the basins using a method that combines two-dimensional flexural backstripping and gravity modelling techniques. We assumed a model of uniform lithospheric stretching and Airy isostasy in the analysis of tectonic subsidence. Our study shows that the basins are probably underlain by relatively thinned crust, indicating that some form of crustal stretching was involved. To explain the observed gravity anomalies, however, the Moho depth that we calculated based on the free-air gravity data is about 25% deeper than the Moho predicted by assuming Airy isostasy (Backstrip Moho). This suggests that the Airy model overestimates the compensation and that the basins are probably undercompensated isostatically. In other words, there is an extra amount of tectonic subsidence that is not compensated by crustal thinning, which has resulted in the discrepancy between the gravity-derived Moho and the Backstrip Moho. We attribute this uncompensated or anomalous tectonic subsidence to thin-skinned crustal extension that did not involve the mantle lithosphere. The Malay and Penyu Basins are interpreted therefore as basins that formed by a combination of whole-lithosphere stretching and thin-skinned crustal extension. 相似文献