共查询到20条相似文献，搜索用时 15 毫秒
1.
P. Márton 《Geophysical Journal International》1986,86(3):719-725
Summary. Twenty archaeomagnetic directional data are reported from Hungary of which 18 refer to the last 2000 years including Eötvös' four useful inclination results. the majority of the data are shown to be consistent with other European results. It is concluded that there is good prospect of archaeomagnetic dating being feasible in Hungary; two examples are given. 相似文献
2.
A study on DEM-derived primary topographic attributes for hydrologic applications: Sensitivity to elevation data resolution 总被引：1，自引：0，他引：1
Primary topographic attributes play a critical role in determining watershed hydrologic characteristics for water resources modeling with raster-based digital elevation models (DEM). The effects of DEM resolution on a set of important topographic derivatives are examined in this study, including slope, upslope contributing area, flow length and watershed area. The focus of the study is on how sensitive each of the attributes is to the resolution uncertainty by considering the effects of overall terrain gradient and bias from resampling. Two case study watersheds of different gradient patterns are used with their 10 m USGS DEMs. A series of DEMs up to 200 m grid size are produced from the base DEMs using three commonly used resampling methods. All the terrain variables tested vary with the grid size change. It is found that slope angles decrease and contributing area values increase constantly as DEMs are aggregated progressively to coarser resolutions. No systematic trend is observed for corresponding changes of flow path and watershed area. The analysis also suggests that gradient profile of the watershed presents an important factor for the examined sensitivities to DEM resolution. 相似文献
3.
4.
Ana Casado Borbála Hortobágyi Erwan Roussel 《International journal of geographical information science》2018,32(12):2427-2446
The geometry of impounded surfaces is a key tool to reservoir storage management and projection. Yet topographic data and bathymetric surveys of average-aged reservoirs may be absent for many regions worldwide. This paper examines the potential of contour line interpolation (TOPO) and Structure from Motion (SfM) photogrammetry to reconstruct the topography of existing reservoirs prior to dam closure. The study centres on the Paso de las Piedras reservoir, Argentina, and assesses the accuracy and reliability of TOPO- and SfM- derived digital elevation models (DEMs) using different grid resolutions. All DEMs were of acceptable quality. However, different interpolation techniques produced different types of error, which increased (or decreased) with increasing (or decreasing) grid resolution as a function of their nature, and relative to the terrain complexity. In terms of DEM reliability to reproduce area–elevation relationships, processing-related disagreements between DEMs were markedly influenced by topography. Even though they produce intrinsic errors, it is concluded that both TOPO and SfM techniques hold great potential to reconstruct the bathymetry of existing reservoirs. For areas exhibiting similar terrain complexity, the implementation of one or another technique will depend ultimately on the need for preserving accurate elevation (TOPO) or topographic detail (SfM). 相似文献
5.
中国适垦耕地空间分异特征研究 总被引：3，自引：0，他引：3
基于GIS空间分析技术,利用数字地形高程图生成地形高程和坡度分级图,将地形高程分级图、地形坡度分级图、2000年耕地分布图和分县行政区划图叠加,提取2000年分县耕地地形分异数据,计算2006年分县适垦耕地面积,以适垦耕地指数和人均适垦耕地面积为指标,分析我国适垦耕地的空间分异特征。结果表明:1)我国耕地的地形分异特点是随着地形高程和坡度的增加,耕地面积均呈现快速下降的趋势,耕地主要集中于海拔500 m以下且坡度较小的地域。2)适垦耕地的空间分异主要受地形条件控制,海拔较低、地形平缓的平原、盆地和河谷适垦耕地指数一般在50%以上,而海拔较高、地形起伏较大的高原、山地和丘陵地区指数值普遍低于30%。3)我国人均适垦耕地面积空间分布的总体特征是北多南少,人均适垦耕地面积在0.2 hm2以上的高类和较高类大都分布在北方地区,而人均适垦耕地面积在0.067 hm2以下的低类和较低类主要集中于青藏高原及东南沿海地区。 相似文献
6.
De-farming slope farmland has been an effective measure in recent years for the improvement of the eco-environment and the mitigation of soil and water loss on the Loess Plateau. This paper, taking the Yangou Basin as a case study and using day-by-day meteorological data of Yan’an station in 2005, simulated and analyzed the quantitative relation between crop yield, soil and water loss and topographic condition with the aid of WIN-YIELD software. Results show that: 1) topographic gradient has important influence on crop yield. The bigger gradient is, the lower the crop yield. Yields of sorghum and corn decrease by 15.44% and 14.32% respectively at 25° in comparison to the case of 0°. In addition, yields of soya, bean and potato decrease slightly by 5.26%, 4.67% and 3.84%, respectively. The influences of topographic height and slope aspect on crop yield are slight. 2) Under the same topographic condition, different crops’ runoff and soil loss show obvious disparity. Topographic gradient has important influence on soil and water loss. In general, the changing trend is that the soil and water loss aggregates with the increase of gradient, and the maximal amount occurs around 20°. The influence of topographic height is slight. Topographic aspect has a certain effect, and the fundamental characteristic is that values are higher at the aspect of south than north. 3) Topographic gradients of 5° and 15° are two important thresholds. The characteristic about soil and water loss with the variation of topographic gradients show that: the slope farmland with gradient less than 5° could remain unchanged, and the slope farmland more than 15° should be de-farmed as early as possible. 相似文献
7.
顾及数据特性的格网DEM分辨率计算 总被引：1，自引：1，他引：0
水平分辨率是格网DEM的决定性变量之一,直接决定着DEM对地形的逼近程度和地形参数计算、地学模拟的精度。基于地统计学理论和非参数密度估计方法,提出了地形宏观变异和微观变异相结合的DEM适宜分辨率计算方法。即首先按系列支撑对采样数据进行格网划分,形成具有不同尺度的支撑域;然后利用正则化理论,对高程点数据进行正则化变换,通过不同支撑上正则化变量的半变异函数分析,探索不同支撑尺度上的地形宏观变异规律,从而确定地形宏观变异的最佳支撑尺度;第三,在所确定的宏观变异最佳支撑尺度内,借鉴非参数密度估计中直方图的理论方法,从微观角度计算DEM适宜分辨率。最后通过陕北黄土高原的实际采样数据,对本文提出的方法进行了验证。 相似文献
8.
黄土高原作物产量及水土流失地形分异模拟 总被引：5，自引：0，他引：5
退耕坡地是近年来黄土高原整治生态环境和控制水土流失的有效措施。基于WIN_YIELD 软件, 以延安燕沟流域为例,利用2005 年延安站的逐日气象数据和燕沟流域地貌、土壤及土地利用等资料, 模拟分析了不同地形高程、坡度和坡向条件下不同作物产量及水土流失的分异特征。结果表明： 在黄土高原, 地形坡度是影响作物产量、径流和泥沙的重要因素, 地形高程和坡向的影响普遍较微弱; 地形坡度越大, 作物产量越低, 高粱和玉米在坡度为25o 时的产量模拟值分别较0o 时下降15.44%和14.32%, 大豆、绿豆和马铃薯的下降幅度依次为5.26%、4.67%和3.84%; 产生径流和泥沙随地形坡度的增大而增大, 在坡度20o左右存在一个高值区间; 不同作物的水土保持效益由高到低依次为大豆、绿豆(豆类)、马铃薯、玉米和高粱; 坡度小于5o的坡耕地可以不进行梯田改造, 坡度大于15o 的坡耕地应及早实现退耕还林还草。 相似文献
9.
A digital elevation model (DEM), which is used to represent a terrain surface, is normally constructed by applying an interpolation method on given sample elevation points. Interpolation methods can be classified into two classes: linear methods, which have a low time cost and are suitable for terrains where there is little change in elevation, and nonlinear methods, which normally consume comparatively more time and are more suitable for terrains where there are frequent changes in elevation. A hybrid interpolation method, which involves both a linear method and a nonlinear method of interpolation, is proposed in this paper. The proposed method aims to integrate the advantages of both linear and nonlinear interpolation methods for the refinement of regular grid DEM. Here, the bilinear is identified as the linear method, and the bi‐cubic is taken to be the nonlinear interpolation method. The hybrid method is an integration of a linear model and nonlinear interpolation model with a parameter that defines the weights for each of the models. The parameter is dependent on the complexity of the terrain, for which a DEM is to be interpolated. The experimental results in this study demonstrate that the hybrid method is effective for interpolating DEMs for various types of terrain. 相似文献
10.
Helena Mitasova Jaroslav Hofierka Maros Zlocha Louis R. Iverson 《International journal of geographical information science》2013,27(5):629-641
Abstract Modelling of erosion and deposition in complex terrain within a geographical information system (GIS) requires a high resolution digital elevation model (DEM), reliable estimation of topographic parameters, and formulation of erosion models adequate for digital representation of spatially distributed parameters. Regularized spline with tension was integrated within a GIS for computation of DEMs and topographic parameters from digitized contours or other point elevation data. For construction of flow lines and computation of upslope contributing areas an algorithm based on vector-grid approach was developed. The spatial distribution of areas with topographic potential for erosion or deposition was then modelled using the approach based on the unit stream power and directional derivatives of surface representing the sediment transport capacity. The methods presented are illustrated on study areas in central Illinois and the Yakima Ridge, Washington. 相似文献
11.
黄土高原作物产量及水土流失地形分异模拟 总被引：2，自引：1，他引：1
De-farming slope farmland has been an effective measure in recent years for the improvement of the eco-environment and the mitigation of soil and water loss on the Loess Plateau. This paper, taking the Yangou Basin as a case study and using day-by-day mete- orological data of Yan'an station in 2005, simulated and analyzed the quantitative relation between crop yield, soil and water loss and topographic condition with the aid of WIN-YIELD software. Results show that: 1) topographic gradient has important influence on crop yield. The bigger gradient is, the lower the crop yield. Yields of sorghum and corn decrease by 15.44% and 14.32% respectively at 25° in comparison to the case of 0°. In addition, yields of soya, bean and potato decrease slightly by 5.26%, 4.67% and 3.84%, respectively. The in- fluences of topographic height and slope aspect on crop yield are slight. 2) Under the same topographic condition, different crops' runoff and soil loss show obvious disparity. Topographic gradient has important influence on soil and water loss. In general, the changing trend is that the soil and water loss aggregates with the increase of gradient, and the maximal amount occurs around 20°. The influence of topographic height is slight. Topographic aspect has a certain effect, and the fundamental characteristic is that values are higher at the aspect of south than north. 3) Topographic gradients of 5° and 15° are two important thresholds. The characteristic about soil and water loss with the variation of topographic gradients show that: the slope farmland with gradient less than 5° could remain unchanged, and the slope farm- land more than 15° should be de-farmed as early as possible. 相似文献
12.
Sarah Praskievicz 《自然地理学》2018,39(2):99-117
One of the challenges in using general circulation model (GCM) output is the need to downscale beyond the model’s coarse spatial grid for use in hydrologic modeling of climate-change impacts. In mountainous terrain, using elevation as a primary control on temperature and precipitation at the local scale provides the potential for topographic variables to be used to adjust climate-model output. Here, local topographic lapse rates (LTLR) were estimated from gridded climate data for the Pacific Northwest of the United States and used to downscale GCM output. Skill scores were calculated for the LTLR-downscaled climate-model output relative to an existing set of model output downscaled using the established statistical downscaling technique of localized constructed analogs (LOCA). The results indicate that the LTLR method performs well in the mountainous study region relative to the LOCA method. LTLR downscaling offers a promising method for downscaling climate-model output in regions in which elevation strongly controls climate, particularly for studying impacts of future climate change on water resources. 相似文献
13.
Landslide inventory maps are necessary for assessing landslide hazards and addressing the role slope stability plays in landscape evolution over geologic timescales. However, landslide inventory maps produced with traditional methods — aerial photograph interpretation, topographic map analysis, and field inspection — are often subjective and incomplete. The increasing availability of high-resolution topographic data acquired via airborne Light Detection and Ranging (LiDAR) over broad swaths of terrain invites new, automated landslide mapping procedures. We present two methods of spectral analysis that utilize LiDAR-derived digital elevation models of the Puget Sound lowlands, Washington, and the Tualatin Mountains, Oregon, to quantify and automatically map the topographic signatures of deep-seated landslides. Power spectra produced using the two-dimensional discrete Fourier transform and the two-dimensional continuous wavelet transform identify the characteristic spatial frequencies of deep-seated landslide morphologic features such as hummocky topography, scarps, and displaced blocks of material. Spatial patterns in the amount of spectral power concentrated in these characteristic frequency bands highlight past slope instabilities and allow the delineation of landslide terrain. When calibrated by comparison with detailed, independently compiled landslide inventory maps, our algorithms correctly classify an average of 82% of the terrain in our five study areas. Spectral analysis also allows the creation of dominant wavelength maps, which prove useful in analyzing meter-scale topographic expressions of landslide mechanics, past landslide activity, and landslide-modifying geomorphic processes. These results suggest that our automated landslide mapping methods can create accurate landslide maps and serve as effective, objective, and efficient tools for digital terrain analysis. 相似文献
14.
Automated classifications of topography from DEMs by an unsupervised nested-means algorithm and a three-part geometric signature 总被引：7，自引：3，他引：7
An iterative procedure that implements the classification of continuous topography as a problem in digital image-processing automatically divides an area into categories of surface form; three taxonomic criteria–slope gradient, local convexity, and surface texture–are calculated from a square-grid digital elevation model (DEM). The sequence of programmed operations combines twofold-partitioned maps of the three variables converted to greyscale images, using the mean of each variable as the dividing threshold. To subdivide increasingly subtle topography, grid cells sloping at less than mean gradient of the input DEM are classified by designating mean values of successively lower-sloping subsets of the study area (nested means) as taxonomic thresholds, thereby increasing the number of output categories from the minimum 8 to 12 or 16. Program output is exemplified by 16 topographic types for the world at 1-km spatial resolution (SRTM30 data), the Japanese Islands at 270 m, and part of Hokkaido at 55 m. Because the procedure is unsupervised and reflects frequency distributions of the input variables rather than pre-set criteria, the resulting classes are undefined and must be calibrated empirically by subsequent analysis. Maps of the example classifications reflect physiographic regions, geological structure, and landform as well as slope materials and processes; fine-textured terrain categories tend to correlate with erosional topography or older surfaces, coarse-textured classes with areas of little dissection. In Japan the resulting classes approximate landform types mapped from airphoto analysis, while in the Americas they create map patterns resembling Hammond's terrain types or surface-form classes; SRTM30 output for the United States compares favorably with Fenneman's physical divisions. Experiments are suggested for further developing the method; the Arc/Info AML and the map of terrain classes for the world are available as online downloads. 相似文献
15.
地形信息对确定DEM适宜分辨率的影响 总被引：2，自引：0，他引：2
分辨率会直接影响基于栅格数字高程模型（DEM）的数字地形分析结果,因此在实际应用中,需要选择适宜的DEM分辨率。目前采取的基本方法,基于某种地形信息定量刻画尺度效应曲线,从而确定DEM适宜分辨率,但对于采用不同地形信息时所产生的影响尚缺乏研究。本文针对该方法中通常采用的坡度、剖面曲率、水平曲率等3 种地形信息,每种地形信息提取时,分别使用两种不同的常用算法,在3 个不同地形特征的研究区中,逐一计算其在不同分辨率下的局部方差均值,以刻画尺度效应曲线,确定相应的DEM适宜分辨率,并进行对比分析。结果表明：① 采用剖面曲率或水平曲率所得适宜分辨率结果基本相同,但采用坡度所得出的适宜分辨率结果则有明显差别,后者所得的适宜分辨率更粗;② 采用不同地形信息时,越是在平缓地形为主的研究区,所得的适宜分辨率结果越相近,在复合地形特征的研究区所得到的适宜分辨率区间均明显较宽;③ 地形属性计算时所用的算法对适宜分辨率结果的影响不明显。 相似文献
16.
Igor V. Florinsky 《International journal of geographical information science》2013,27(2):213-231
Loci of extreme curvature of the topographic surface may be defined by the derivation function (T) depending on the first‐, second‐, and third‐order partial derivatives of elevation. The loci may partially describe ridge and thalweg lines. The first‐ and second‐order partial derivatives are commonly calculated from a digital elevation model (DEM) by fitting the second‐order polynomial to a 3×3 window. This approach cannot be used to compute the third‐order partial derivatives and T. We deduced formulae to estimate the first‐, second‐, and third‐order partial derivatives from a DEM fitting the third‐order polynomial to a 5×5 window. The polynomial is approximated to elevation values of the window. This leads to a local denoising that may enhance calculations. Under the same grid size of a DEM and root mean square error (RMSE) of elevation, calculation of the second‐order partial derivatives by the method developed results in significantly lower RMSE of the derivatives than that using the second‐order polynomial and the 3×3 window. An RMSE expression for the derivation function is deduced. The method proposed can be applied to derive any local topographic variable, such as slope gradient, aspect, curvatures, and T. Treatment of a DEM by the method developed demonstrated that T mapping may not substitute regional logistic algorithms to detect ridge/thalweg networks. However, the third‐order partial derivatives of elevation can be used in digital terrain analysis, particularly, in landform classifications. 相似文献
17.
A. Stock H. Tolvanen R. Kalliola 《International journal of geographical information science》2013,27(9):1435-1452
Geographical information systems (GIS) are important tools in coastal research and management. Coastal GIS applications involve special challenges, because the coastal environment is a complex transitional system between the terrestrial and marine realms. Also acquisition methods and responsibilities for spatial data (and thus their properties) change at the shoreline. This article explores the consequences of this land-sea divide for coastal terrain modelling. We study how methods designed for terrestrial environments can be used to create integrated raster coastal terrain models (CTMs) from coarse elevation and depth data. We focus on shore slopes, because many particularities of coastal terrain and the data which describe it as well as the resulting problems are concentrated in the shore zone. Based on shorelines, terrestrial contours, depth contours and depth points, we used the ANUDEM algorithm to interpolate CTMs at different spatial resolutions, with and without drainage enforcement, for two test areas in a highly complex archipelago coast. Slope aspect and gradient rasters were derived from the CTMs using Horn's algorithm. Values were assigned from the slope rasters to thousands of points along the test areas' shorelines in different ways. Shore slope gradients and aspects were also calculated directly from the shorelines and contours. These modelled data were compared to each other and to field-measured shore profiles using a combination of qualitative and quantitative methods. As far as the coarse source data permitted, the interpolation and slope calculations delivered good results at fine spatial resolutions. Vector-based slope calculations were very sensitive to quality problems of the source data. Fine-resolution raster data were consequently found most suitable for describing shore slopes from coarse coastal terrain data. Terrestrial and marine parts of the CTMs were subject to different errors, and modelling methods and parameters had different consequences there. Thus, methods designed for terrestrial applications can be successfully used for coastal terrain modelling, but the choice of methods and parameters and the interpretation of modelling results require special attention to the differences of terrestrial and marine topography and data. 相似文献
18.
基于DEM的地形单元多样性指数及其算法 总被引：4，自引：0，他引：4
在阐述地形信息表达研究进展的基础上,提出基于DEM地形单元多样性指数的概念和算法。地形单元多样性指数综合了高程、坡度、坡位、坡向、汇流量和水域信息等要素。其算法集成地形位置指数和地形湿度指数算法,采用图层叠加分析,设定分类、分级指标,进行重分类组合,划分地形单元类型,利用窗口分析法计算地形单元多样性指数。以四川省为试验区,利用精度为100 m的DEM数据和水域分布数据进行模拟计算,地形单元划分为13种典型类型,统计窗口半径设为900 m,计算出的多样性指数值小于0.5的区域仅占总面积的11%,大于0.75的区域达57%,符合实验区地形特征,并对算法进行了可行性分析和验证。结果表明,该算法提取的地形单元多样性指数可以有效反映地表形态的多样性特征及其变化。该研究结果为进一步探讨基于DEM地表形态信息的概念体系,以及从微观到宏观的地形信息空间分析研究创造了条件。 相似文献
19.
数字地形分析在滑坡研究中的应用综述 总被引：2，自引：0，他引：2
高效的数字地形分析（Digital Terrain Analysis,DTA）是滑坡预测与评估研究的重要手段。文章综述了DTA在滑坡研究中的应用现状,基本内容包括地形因子分析、地形形态分析、地形单元划分以及DEM与滑坡模型的结合分析。地形因子分析的应用多而广,主要思路是在地形因子与滑坡发育的关系研究基础上分析其滑坡敏感性,进而构建滑坡预测和评估模型;地形形态分析是滑坡识别的重要手段,加强地貌形态和滑坡发育的关系研究有助于对潜在滑坡地形的识别;地形单元划分能为滑坡研究提供统计和分析单元;DEM与滑坡专业模型的结合方式多样,程度各异。同时,从尺度选择与转换的角度探讨了DTA滑坡研究的尺度问题,分析了DTA的局限性,指出DEM不能提供完备无误的地形信息,DTA不能完全取代常规的地形分析。最后,基于以上论述对未来的研究趋势提出了展望。 相似文献
20.
起伏地形下黄河流域太阳直接辐射分布式模拟 总被引：1，自引：0，他引：1
1 Introduction Directsolarradiation (DSR)isthe key com ponentofthe globalradiation reaching the Earth.For the influence of terrain factors,calculation of DSR quantity of rugged terrain is considerably com plex (Oliphantetal.,2003). The solarradiation quan… 相似文献