首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 984 毫秒
1.
There is a set of Late Cenozoic sediments in the Kunlun Pass area, Tibetan Plateau, China. Paleomagnetic, ESR and TL dating suggest that they date from the Late Pliocene to the Early Pleistocene. Analyses of stratigraphy, sedimentary characteristic, and evolution of the fauna and flora indicate that, from the Pliocene to the early Quaternary (about 5–1.1 Ma BP), there was a relatively warm and humid environment, and a paleolake occurred around the Kunlun Pass. The elevation of the Kunlun Pass area was no more than 1500 m, and only one low topographic divide existed between the Qaidam Basin and the Kunlun Pass Basin. The geomorphic pattern in the Kunlun Pass area was influenced by the Kunlun–Yellow River Tectonic Movement 1.1–0.6 Ma BP. The Wangkun Glaciation (0.7–0.5 Ma) is the maximum Quaternary glaciation in the Pass and in other areas of the Plateau. During the glaciation, the area of the glaciers was 3–5 times larger than that of the present glacier in the Pass area. There was no Xidatan Valley that time. The extreme geomorphic changes in the Kunlun Pass area reflect an abrupt uplift of the Tibet Plateau during the Early and Middle Pleistocene. This uplift of the Plateau has significance on both the Plateau itself and the surrounding area.  相似文献   

2.
The Dien Bien Phu fault zone (DBP), orientated NNE to N, is one of the most seismically active zones in Indochina. In NW Vietnam, this zone is 160 km long and 6–10 km wide, cutting sedimentary and metamorphic rocks of the Late Proterozoic, Palaeozoic and Mesozoic age, as well as Palaeozoic and Late Triassic granitoids. Along the DBP relatively small, narrow pull-apart basins occur, the three largest of which (Chan Nua, Lai Chau and Dien Bien Phu) have been studied in detail. All of them are bounded by sinistral and sinistral-normal faults, responsible for offset and deflected drainage, presence of numerous shutter ridges and displaced terraces and alluvial fans. The normal component of motion is testified to by well-preserved triangular facets on fault scarps, highly elevated straths in river watergaps, overhanging tributary valleys, as well as high and uneven river-bed gradients.Our observations indicate a minimum recent sinistral offset ranging from 6–8 to 150 m for Holocene valleys to 1.2–9.75 km for middle–late Pleistocene valleys in different fault segments. The thickness of Quaternary sediments varies from 5–25 m in the Lai Chau area to some 130 m in the Dien Bien Phu Basin. In the Lai Chau Basin, the middle terrace (23 m) alluvia of Nam Na River at Muong Te bridge have been optically stimulated luminescence/single aliquot regenerative dose technique (OSL-SAR) dated at 23–40 to 13 ka. These sediments were normal-faulted by some 11 m after 13 ka, and mantled by vari-coloured slope loams, 8–12 m thick, containing colluvial wedges composed of angular debris. These wedges were probably formed due to at least three palaeoseismic events postdating 6 ka. In the Dien Bien Phu Basin, in turn, alluvium of the upper Holocene terraces has been OSL-SAR dated to 6.5–7 and 1.7–1.0 ka, whereas the younger (sub-recent) terrace sediments give ages of 0.5–0.2 ka.Displaced terraces and alluvial fans allow us to suppose that the sinistral and sinistral-normal faults bounding narrow pull-apart basins in the southern portion of the DBP fault reveal minimum rates of left-lateral strike-slip ranging from 0.6 to 2 mm/year in Holocene and 0.5–3.8 mm/year in Pleistocene times, whereas rates of Holocene uplift tend to attain 1 mm/year north of Lai Chau and 0.4–0.6 mm/year west of Dien Bien Phu. More precise estimations, however, are difficult to obtain due to poor age control of the displaced drainage. Rates of Quaternary strike-slip are comparable with those of the Red River fault; the sense of movement being, however, opposite. Taking into account the presence of two phases of Late Cenozoic strike-slip of contrasting sense of motion, as well as the geometry of the two fault zones, we hypothesize that the Red River and Dien Bien Phu faults are conjugate faults capable of generating relatively strong earthquakes in the future.  相似文献   

3.
The northeast-trending Pallatanga right-lateral strike-slip fault runs across the Western Cordillera connecting N50E-N70E trending normal faults in the Gulf of Guayaquil with N-S reverse faults in the Interandean Depression. Over most of its length, the fault trace has been partly obscured by erosional processes and can be inferred in the topography only at the large scale. Only the northern fault segment, which follows the upper Rio Pangor valley at elevations above 3600 m, is prominent in the morphology. Valleys and ridges cut and offset by the fault provide an outstanding record of right-lateral cumulative fault displacement. The fault geometry and kinematics of this particular fault segment can be determined from detailed topographic levellings. The fault strikes N30E and dips 75 to the NW. Depending on their size and nature, transverse morphological features such as tributaries of the Rio Pangor and intervening ridges, reveal right-lateral offsets which cluster around 27 ± 11m, 41.5 ± 4 m, 590 ± 65 m and 960 ± 70 m. The slip vector deduced from the short-term offsets shows a slight reverse component with a pitch of about 11.5 SW. The 41.5 ± 4 m displacements are assumed to be coeval with the last glacial termination, yielding a mean Holocene slip-rate of 2.9- 4.6 mm yr−1. Assuming a uniform slip rate on the fault in the long term, the 27 m offset appears to correlate with an identified middle Holocene morphoclimatic event, and the long term offsets of 590 m and 960 m coincide with the glacial terminations at the beginning of the last two interglacial periods.  相似文献   

4.
Scaling relationships between seismic moment, rupture length, and rupture width have been examined. For this purpose, the data from several previous studies have been merged into a database containing more than 550 events. For large earthquakes, a dependence of scaling on faulting mechanism has been found. Whereas small and large dip-slip earthquakes scale in the same way, the self-similarity of earthquakes breaks down for large strike-slip events. Furthermore, no significant differences in scaling could be found between normal and reverse earthquakes and between earthquakes from different regions. Since the thickness of the seismogenic layer limits fault widths, most strike-slip earthquakes are limited to rupture widths of between 15 and 30 km while the rupture length is not limited. The aspect ratio of dip-slip earthquakes is similar for all earthquake sizes. Hence, the limitation in rupture width seems to control the maximum possible rupture length for these events. The different behaviour of strike-slip and dip-slip earthquakes can be explained by rupture dynamics and geological fault growth. If faults are segmented, with the thickness of the seismogenic layer controlling the length of each segment, strike-slip earthquakes might rupture connected segments more easily than dip-slip events, and thus could produce longer ruptures than dip-slip events of the same width  相似文献   

5.
The Parque Nacional Torres Del Paine and surrounding area in the Magallanes foreland basin in Chilean Patagonia is the site for numerous lakes fed by glaciers and rivers in the Andean highlands to the west. The lakes are elongate and have conspicuously systematic orientations. We hypothesize that the origin of the oriented lakes lies in the fault system, composed of a right-lateral strike-slip fault set oriented 58° from north, a left-lateral strike-slip set oriented 87°, and a thrust fault set oriented 167°, that exists within the underlying rocks. To test this hypothesis quantitatively, we determined the shape and orientation of the lakes by fitting each lake with an ellipse of appropriate aspect ratio, and later with multiple ellipses consistent with the composite geometry of some lakes. We then examined the faults in the area in terms of their kinematics, orientation and distribution. The distribution of lake orientations showed three distinct groups which appear to correspond to the three main fault groups. For lakes fitted with multiple ellipses, the difference in means between the right-lateral, left-lateral, and thrust faults and their corresponding groups of lakes are 3.05°, 1.57°, and 5.17°. Using a Kolmogorov–Smirnov (K–S) statistical test to compare the orientations of faults with respect to the lakes suggests that there is not a strongly significant difference between the fault orientations and the corresponding lake groups. These results indicate that the faults have a profound control on the orientation, shape, and distribution of the lakes. We attribute this to faults and their damage zones being weaker and therefore prone to a faster rate of erosion, and to stress perturbations associated with discontinuous faults resulting in localized high density fracturing and surface subsidence. These results have implications for lake and drainage system morphologies in other foreland basins along the Andes and other similar settings.  相似文献   

6.
A light detection and ranging (LiDAR) survey was conducted in a densely built-up area to generate a high-resolution digital elevation model (DEM) to look for active faults. The urban district of Matsumoto City in central Japan is located in a 3-km2 basin along the Itoigawa–Shizuoka Tectonic Line active fault system, one of Japanese onshore fault systems with the highest earthquake probability. A high-resolution DEM at a 0.5-m-grid interval was obtained after removing the effects of laser returns from buildings, clouds and vegetation. It revealed a continuous scarp, up to ~ 2 m in height. Borehole data and archaeological studies indicate the scarp was formed during the most recent faulting event associated with historical earthquakes. In addition, the fault scarp strongly supports that the urban district is in a pull-apart basin related to a fault step-over between two left-lateral strike-slip faults. Consequently, accurate interpretation of fault geometry is crucial to provide estimates of future surface deformation and to allow modeling of basin structure and strong ground motion. Thus, the LiDAR mapping survey in urban districts is effective for detailed active fault mapping in order to constrain basin structure and to forecast the exact location of surface rupturing associated with large earthquakes.  相似文献   

7.
《Geomorphology》2006,73(1-2):16-32
Well-constrained case studies of transient landscape response to external forcing are needed to improve our understanding of erosion processes in tectonically active mountain belts. The Peninsular Ranges portion of the San Jacinto fault zone (SJFZ) is an excellent location for such a study because it displays pronounced geomorphic disequilibrium resulting from initiation of a major strike-slip fault in the past 1.0 to 2.5 million years. We recognize two geomorphic domains in this region: (1) a relict low-relief upland domain consisting of broad flat valleys and low-gradient streams and (2) very steep, rough topography with deeply incised canyons and retreating erosional knickpoints. Pleistocene sediments exposed along and near the SJFZ include fluvial conglomerate, sandstone, and mudstone, with weak paleosols and west- to NW-directed paleocurrents. These sediments accumulated in a low-gradient stream system (represented by domain 1) during an early phase of slip in the SJFZ, prior to the modern phase of erosion and degradation (domain 2). Late Pliocene or early Pleistocene initiation of the SJFZ triggered a wave of headward erosion and stream capture that is still migrating NW along the fault zone. Using the total distance that capture points have migrated along the fault zone and a range of possible ages for fault initiation, the rate of knickpoint retreat is estimated at ∼ 12 to 44 km/my.To explore the signal of transient geomorphic response to fault initiation, we analyzed 23 tributaries along an ∼ 20-km portion of the main fault valley within domain 2. The analysis reveals three zones with distinctive morphologies: (1) strongly convex longitudinal profiles in the NW, (2) a large (ca. 5–6 km2) landslide in the central zone, and (3) concave tributaries in the SE with profile complexity decreasing and catchment area increasing from NW to SE. The distribution of these zones suggests close spatial and temporal association of active fault slip, bedrock incision, deep-seated landslides, and erosional modification. The fundamental driving force behind these processes is profound geomorphic disequilibrium resulting from initiation of the SJFZ. We suggest that landslides may have played a significant role in shaping the morphology of this fault zone, and that the influence of landslides may be underestimated in areas where characteristic landforms and deposits are obscured by later erosion and faulting.  相似文献   

8.
Longitudinal profiles of bedrock streams in central Kentucky, and of coastal plain streams in southeast Texas, were analyzed to determine the extent to which they exhibit smoothly concave profiles and to relate profile convexities to environmental controls. None of the Kentucky streams have smoothly concave profiles. Because all observed knickpoints are associated with vertical joints, if they are migrating it either occurs rapidly between vertical joints, or migrating knickpoints become stalled at structural features. These streams have been adjusting to downcutting of the Kentucky River for at least 1.3 Ma, suggesting that the time required to produce a concave profile is long compared to the typical timescale of environmental change. A graded concave longitudinal profile is not a reasonable prediction or benchmark condition for these streams. The characteristic profile forms of the Kentucky River gorge area are contingent on a particular combination of lithology, structure, hydrologic regime, and geomorphic history, and therefore do not represent any general type of equilibrium state. Few stream profiles in SE Texas conform to the ideal of the smoothly, strongly concave profile. Major convexities are caused by inherited topography, geologic controls, recent and contemporary geomorphic processes, and anthropic effects. Both the legacy of Quaternary environmental change and ongoing changes make it unlikely that consistent boundary conditions will exist for long. Further, the few exceptions within the study area–i.e., strongly and smoothly concave longitudinal profiles–suggest that ample time has occurred for strongly concave profiles to develop and that such profiles do not necessarily represent any mutual adjustments between slope, transport capacity, and sediment supply. The simplest explanation of any tendency toward concavity is related to basic constraints on channel steepness associated with geomechanical stability and minimum slopes necessary to convey flow. This constrained gradient concept (CGC) can explain the general tendency toward concavity in channels of sufficient size, with minimal lithological constraints and with sufficient time for adjustment. Unlike grade- or equilibrium-based theories, the CGC results in interpretations of convex or low-concavity profiles or reaches in terms of local environmental constraints and geomorphic histories rather than as “disequilibrium” features.  相似文献   

9.
Slip rate on the Dead Sea transform fault in northern Araba valley (Jordan)   总被引：11，自引：0，他引：11  
The Araba valley lies between the southern tip of the Dead Sea and the Gulf of Aqaba. This depression, blanketed with alluvial and lacustrine deposits, is cut along its entire length by the Dead Sea fault. In many places the fault is well defined by scarps, and evidence for left-lateral strike-slip faulting is abundant. The slip rate on the fault can be constrained from dated geomorphic features displaced by the fault. A large fan at the mouth of Wadi Dahal has been displaced by about 500 m since the bulk of the fanglomerates were deposited 77–140 kyr ago, as dated from cosmogenic isotope analysis (10Be in chert) of pebbles collected on the fan surface and from the age of transgressive lacustrine sediments capping the fan. Holocene alluvial surfaces are also clearly offset. By correlation with similar surfaces along the Dead Sea lake margin, we propose a chronology for their emplacement. Taken together, our observations suggest an average slip rate over the Late Pleistocene of between 2 and 6 mm yr−1, with a preferred value of 4 mm yr−1. This slip rate is shown to be consistent with other constraints on the kinematics of the Arabian plate, assuming a rotation rate of about 0.396° Myr−1 around a pole at 31.1°N, 26.7°E relative to Africa.  相似文献   

10.
The Zambapala Fault Zone (ZFZ) is located at the link between the offshore structures of the Gulf of Guayaquil and the Guayaquil Caracas Megashear (GCM) that accommodates the northeastward motion of the North Andean Block. We use morphological observations of drainage offset to assess the active motion of the Zambapala Fault. The relation between the horizontal offset amount D of the stream channel and the upstream length L from the offset segment, and offset of beach morphology provide a measurement of the average slip rate of the motion of the fault to an accuracy of a fraction of millimeters per year. The drainage network is short, running down the southeastern slopes of the Zambapala Cordillera (297 m), a Quaternary dome uplifted along a positive flower structure. We measure the D (drainage offset along the fault)/L (drainage length from the fault) relation for the upper and more recent part of the drainage network. The relation suggests that the fault is active at present. Capture occurs along the middle slopes and channel straightening near the littoral plain, hiding part or most of the fault offset. The fault trace crosses the littoral plain, showing 35–40 m offset of the inner beach ridge, and delimiting variations of the beach morphology. The attribution of a maximum age of 5000–6000 years to the oldest beach ridge (the postglacial transgression) allows us to calculate a minimal mean slip rate of 5.8–8 mm year−1. This result confirms that the Guayaquil Caracas Megashear extends to the Gulf of Guayaquil through the Zambapala Fault Zone, which accommodate at least 60–80% of the slip motion of the Guayaquil Carcas Megashear.  相似文献   

11.
F. Sheldon  M.C. Thoms   《Geomorphology》2006,77(3-4):270
Large rivers are often considered to retain less organic material than smaller streams primarily because of a decrease in retentive structures. From our observations on the Barwon–Darling River, a semi-arid river in southeastern Australia, we suggest that geomorphic complexity plays a fundamental role in the retention of organic matter. The Barwon–Darling River has a ‘complex’ river channel cross-section with large inset benches being a prominent morphological feature within the channel. The importance of geomorphic complexity for retaining organic material is likely to be significant in dryland rivers. These rivers spend extended periods at low flow with infrequent large floods that inundate the floodplain. They do, however, experience more frequent within channel floods that inundate in-channel ‘bench’ features. In-channel geomorphic complexity and its ability to retain organic material, therefore, means that although the dominant lateral movements of organic material will still occur during large overbank flows, smaller ‘pulse’ inputs will occur with each in-channel rise and fall in water level. In dryland rivers, where large overbank flows may only occur every seven or more years, these small ‘pulse’ inputs of organic material may well be vital for the integrity of the system.This paper describes the contemporary complexity of a channel in a regulated and an unregulated reach of the Barwon–Darling and compares this with cross-sections surveyed in 1886. We show that flow regulation has greatly reduced channel complexity. We estimate the potential organic matter input to each bench level within the channel (using data collected under near natural riparian conditions) and measure the contemporary organic loads within the channel of the regulated and unregulated reach. This modelling suggests that the development of water resources has reduced the complexity of the channel in the regulated reach, resulting in a potential decrease in the retention of organic matter in this region of the river. The importance of this organic matter to the aquatic food web of the Barwon–Darling River is also demonstrated.  相似文献   

12.
We identify and describe a series of east–west left-lateral strike-slip faults (named the Songino-Margats, the Hag Nuur, the Uliastay and the South Hangay fault systems) in the Hangay mountains of central Mongolia: an area that has little in the way of recorded seismicity and which is often considered as a rigid block within the India–Eurasia collision zone. The strike-slip faults of central Mongolia constitute a previously unrecognized hazard in this part of Mongolia. Each of the strike-slip faults show indications of late Quaternary activity in the form of aligned sequences of sag-ponds and pressure-ridges developed in alluvial deposits. Total bed-rock displacements of ∼3 km are measured on both the Songino-Margats and South Hangay fault systems. Bed-rock displacements of 11 km are observed across the Hag Nuur fault. Cumulative offset across the Uliastay fault systems are unknown but are unlikely to be large. We have no quantitative constraint on the age of faulting in the Hangay. The ≤20 km of cumulative slip on the Hangay faults might, at least in part, be inherited from earlier tectonic movements. Our observations show that, despite the almost complete absence of instrumentally recorded seismicity in the Hangay, this part of Mongolia is cut through by numerous distributed strike-slip faults that accommodate regional left-lateral shear between Siberia and China. Central Mongolia is thus an important component of the India–Eurasia collision that would be overlooked in models of the active tectonics based on the distribution of seismicity. We suggest that active faults such as those identified in the Hangay of Mongolia might exist in other, apparently aseismic, regions within continental collision zones.  相似文献   

13.
Vishwas S. Kale   《Geomorphology》2007,85(3-4):306
The efficacy of extreme events is directly linked to the flood power and the total energy expended. The geomorphic effectiveness of floods is evaluated in terms of the distribution of stream power per unit boundary area (ω) over time, for three very large floods of the 20th Century in the Indian Peninsula. These floods stand out as outliers when compared with the peak floods per unit drainage area recorded elsewhere in the world. We used flood hydrographs and at-a-station hydraulic geometry equations, computed for the same gauging site or a nearby site, to construct approximately stream-power curves and to estimate the total energy expended by each flood. Critical unit stream power values necessary to entrain cobbles and boulders were estimated on the basis of empirical relationships for coarse sediment transport developed by Williams [Williams, G.P., 1983. Paleohydrological methods and some examples from Swedish fluvial environments. I. Cobble and boulder deposits. Geografiska Annaler 65A, 227–243.] in order to determine the geomorphological effectiveness of the floods. The estimates indicate that the minimum power per unit area values for all three floods were sufficiently high, and stream energy was above the threshold of boulder movement (90 W m− 2) for several tens of hours. The peak unit stream power values and the total energy expended during each flood were in the range of 290–325 W m− 2 and 65–160 × 106 J respectively. The average and peak flood powers were found to be higher or comparable to those estimated for extreme palaeo or modern floods on low-gradient, alluvial rivers.  相似文献   

14.
《Geomorphology》2002,42(3-4):255-278
The Hunter Mountain fault zone strikes northwesterly, is right-lateral strike-slip, and kinematically links the northern Panamint Valley fault zone to the southern Saline Valley fault zone. The most recent displacement of the fault is recorded in the offset of Holocene deposits along the entire length of the fault zone. Right-lateral offsets of drainage channels within Grapevine Canyon reach up to 50 to 60 m. Initial incision of the offset channels is interpreted on the basis of geomorphic and climatic considerations to have occurred approximately 15 ka. The 50 to 60 m of offset during 15 ka corresponds to a right-lateral fault slip rate of 3.3–4.0 mm/year within Grapevine Canyon. Further to the north along the Nelson Range front, the fault is composed of two sub-parallel fault strands and the fault begins to show an increased normal component of motion. A channel margin that is incised into a Holocene surface that is between 10 and 128 ka in age is offset 16–20 m, which yields a broad minimum bound on the lateral slip rate of 0.125–2.0 mm/year. The best preserved single-event displacements recorded in Holocene deposits range from 1.5 to 2.5 m. In addition to faulting within Grapevine Canyon and the main rangefront fault along the southwest edge of Saline Valley, there also exist normal fault strands within the Valley that strike northeasterly and towards Eureka Valley. The northeasterly striking normal faults in the Valley appear to be actively transferring dextral slip from the Hunter Mountain fault zone north and east onto the Furnace Creek fault zone. Separations on northerly trending, normal faults within Saline Valley yield estimates of slip rates in the hundredths of millimeters per year.  相似文献   

15.
This study investigates the origin and regional tectonic implications of high-altitude Plio (?)–Quaternary fluvial deposits developed over the Bozdağ horst which is an important structural element within the horst–graben system of western Anatolia, Turkey.A total of 23 deposits occur near the modern drainage divide comprising fluvial to occasionally lacustrine deposits. The deposits are all elongated in N–S direction with a width / length ratio of 1 / 10. The largest of them is of 13 km in length with a maximum observable thickness of about 100–110 m. Morphological, lithological, deformational characteristics of these deposits and the drainage system of the area all suggest that the deposits were formed due to uplift and southward tilting of the Bozdağ horst. This tilting which is estimated as 1.2° to 2.2° caused accumulation of the stream load along channels flowing from south to north. All the deposits were later dissected by the same streams with the exception of one deposit which still preserves its original lake form. These deposits are of Quaternary age, which corresponds to the latest N–S directed extensional tectonic phase in the region.  相似文献   

16.
In the Solway Firth — Morecambe Bay region of Great Britain there is evidence for heightened hillslope instability during the late Holocene (after 3000 cal. BP). Little or no hillslope geomorphic activity has been identified occurring during the early Holocene, but there is abundant evidence for late Holocene hillslope erosion (gullying) and associated alluvial fan and valley floor deposition. Interpretation of the regional radiocarbon chronology available from organic matter buried beneath alluvial fan units suggests much of this geomorphic activity can be attributed to four phases of more extensive gullying identified after 2500–2200, 1300–1000, 1000–800 and 500 cal. BP. Both climate and human impact models can be evoked to explain the crossing of geomorphic thresholds: and palaeoecological data on climatic change (bog surface wetness) and human impact (pollen), together with archaeological and documentary evidence of landscape history, provide a context for addressing the causes of late Holocene geomorphic instability. High magnitude storm events are the primary agent responsible for gully incision, but neither such events nor cooler/wetter climatic episodes appear to have produced gully systems in the region before 3000 cal. BP. Increased gullying after 2500–2200 cal. BP coincides with population expansion during Iron Age and Romano-British times. The widespread and extensive gullying after 1300–1000 cal. BP and after 1000–800 cal. BP coincides with periods of population expansion and a growing rural economy identified during Norse times, 9–10th centuries AD, and during the Medieval Period, 12–13th centuries AD. These periods were separated by a downturn associated with the ‘harrying of the north’ AD 1069 to 1070. The gullying episode after 500 cal. BP also coincides with increased anthropogenic pressure on the uplands, with population growth and agricultural expansion after AD 1500 following 150 years of malaise caused by livestock and human (the Black Death) plagues, poor harvests and conflicts on the Scottish/English border. The increased susceptibility to erosion of gullies is a response to increased anthropogenic pressure on upland hillslopes during the late Holocene, and the role of this pressure appears crucial in priming hillslopes before subsequent major storm events. In particular, the cycles of expansion and contraction in both population and agriculture appear to have affected the susceptibility of the upland landscape to erosion, and the hillslope gullying record in the region, therefore, contributes to understanding of the timing and spatial pattern of human exploitation of the upland landscape.  相似文献   

17.
Soil profiles, colluvial stratigraphy, and detailed hillslope morphology are key elements used for geomorphic interpretations of the form and long-term evolution of triangular facets on a 1200 m high, tectonically active mountain front. The facets are developed on Precambrian gneisses and Tertiary volcanic and plutonic rocks along a complexly segmented, active normal-fault zone in the Rio Grande rift of northern New Mexico. The detailed morphologies of 20− to 350 m high facets are defined by statistical and time-series analyses of 40 field transects that were keyed to observations of colluvium, bedrock, microtopography, and vegetation. The undissected parts of most facets are transport-limited hillslopes mantled with varying thicknesses (0.1 to > 1 m thick) of sand and gravel colluvium between generally sparse (≤10–30%) bedrock outcrops. Facet soils range from (a) thin (≤ 0.2 m) weakly developed soils with cumulic silty A or transitional A/B epipedons above Cox horizons in bedrock or colluvium, to (b) deep (≥0.5–1 m) moderately to strongly developed profiles containing thick cambic (Bw) and/or argillic (Bt) horizons that commonly extend into highly weathered saprolitic bedrock. The presence of strongly weathered profiles and thick colluvium suggests that rates of colluvial transport and hillslope erosion are less than or equal to rates of soil development over at least a large part of the Holocene.The catenary variation of soils and colluvium on selected facet transects indicate that the degree of soil development generally increases and the thickness of colluvium decreases upslope on most facets. This overall pattern is commonly disrupted on large facet hillslopes by irregular secondary soil variations linked to intermediate-scale (20–60 + m long) concave slope elements. These features are interpreted to reflect discontinuous transport and erosion of colluvium down-slope below bedrock outcrops. The degree of weathering in subsurface bedrock commonly increases more systematically upslope on most facets than colluvial soils. This pattern is consistent with an increase in age with height on these fault-generated facet hillslopes.The characteristic range of internal variation in soils and colluvial deposits on a given facet also varies greatly among facets with differing overall morphologies and external environments. Deep cumulic soils and thick colluvium occur consistently on steep (≥ 30°), high, and relatively undissected facets above the narrow central sections of fault segments. Much thinner and less weathered colluvium and soils overlie saprolitic bedrock at shallow depths on low, highly dissected, gently sloping (≤ 20°) facets above complex fault segment boundaries. Parametric and nonparametric analyses of variance indicate that these large-scale contrasts in facet morphology correlate primarily with a few facet subgroups related, in decreasing importance, to variations in range-front faulting, bedrock lithology, and piedmont dissection or aggradation. These factors are related to facet morphology, drainage evolution, and hillslope-soil stratigraphy in a general geomorphic model for fault-generated facets. In this model, segmentation-related changes in the geometry and/or rates of faulting most strongly affect facet size, slope gradient, the thickness of colluvium and soil development, and drainage patterns. Facets of varying heights have similar hillslope forms at the same position on the range front; these characteristic morphologies are established under prevailing tectonic and nontectonic conditions on facets as bedrock is initially exposed from beneath alluvial-covered fault scarps above a height threshold of 15–35 m.  相似文献   

18.
This paper provides data on the landforms, soils, and sediments within a unique northern Michigan landscape known as the Grayling Fingers, and evaluates these data to develop various scenarios for the geomorphic development of this region. Composed of several large, flat-topped ridges that trend N–S, the physiography of the “Fingers” resembles a hand. Previously interpreted as “remnant moraines”, the Grayling Fingers are actually a Pleistocene constructional landscape that was later deeply incised by glacial meltwater. The sediments that comprise the Fingers form a generally planar assemblage, with thick (>100 m), sandy glacial outwash forming the lowest unit. Above the outwash are several meters of till that is remarkably similar in texture to the outwash below; thus, the region is best described as an incised ground moraine. Finally, a thin silty “cap” is preserved on the flattest, most stable uplands. This sediment package and the physiography of the Fingers are suggestive of geomorphic processes not previously envisioned for Michigan.Although precise dates are lacking, we nonetheless present possible sequences of geomorphic/sedimentologic processes for the Fingers. This area was probably a topographic high prior to the advance of marine isotope stage 2 (Woodfordian) ice. Much of the glacial outwash in the Fingers is probably associated with a stagnant, early Woodfordian ice margin, implying that this interlobate area remained ice-free and ice-marginal for long periods during stage 2. Woodfordian ice eventually covered the region and deposited 5–10 m of sandy basal till over the proglacial outwash plain. Small stream valleys on the outwash surface were palimpsested onto the till surface as the ice retreated, as kettle chains and as dry, upland valleys. The larger of these valleys were so deeply incised by meltwater that they formed the large, through-flowing Finger valleys. The silt cap that occupies stable uplands was probably imported into the region, while still glaciated. The Fingers region, a col on the ice surface, could have acted as a collection basin for silts brought in as loess or in superglacial meltwater. This sediment was let down as the ice melted and preserved only on certain geomorphically stable and fluvially isolated locations. This study demonstrates that the impact of Woodfordian ice in this region was mostly erosional, and suggests that Mississippi Valley loess may have indirectly impacted this region.  相似文献   

19.
Fluvial response to tectonic deformation is dependent on the amount and style of surface deformation and the relative size of the stream. Active folding in the New Madrid seismic zone (NMSZ) forms the Tiptonville dome, a 15-km long and 5-km wide surface fold with up to 11 m of late Holocene structural relief. The fold is crossed by streams of varying size, from the Mississippi River to small flood-plain streams. Fluvial response of these streams to repeated coseismic folding has only been preserved for the past 2.3 ka, since the Tiptonville meander of the Mississippi River migrated across the area forming the present flood plain. This surface comprises a sandy point-bar deposit locally overlain by clayey overbank and silty sand crevasse-splay deposits, an abandoned chute channel infilled with laminated sandy silt and silty clay, and an abandoned neck cutoff filled with a sandy cutoff bar and silty clay oxbow lake deposits.Dating various stream responses to coseismic folding has more tightly constrained the timing of earthquake events in the central NMSZ and provides a means of partitioning the deformation amount into individual seismic events. Three earthquakes have been dated in the Reelfoot Lake area, ca. A.D. 900, 1470, and 1812. The latter two earthquakes had large local coseismic deformation. Both of these events were responsible for numerous stream responses such as shifting depocenters, modification of Mississippi River channel geometry, and derangement of small streams. Overbank sedimentation ceased on the dome as it was uplifted above the normal flood stage, and sedimentation of crevasse-splay deposits from the Mississippi River, colluvium from the scarp, and lacustrine sediment accumulated in the adjacent Reelfoot basin. The much larger Mississippi River channel responded to uplift by increasing its sinuosity across the uplift relative to both upstream and downstream, increasing its width/depth ratio across and downstream of the uplift, and decreasing the width/depth ratio upstream of the uplift. Despite the size of the Mississippi River, it has not yet attained equilibrium since the latest uplift 190 years ago. Small channels that could not downcut through the uplift were filled, locally reversed flow direction, or formed a lake where they were dammed.Uplift and stream response to folding along the Tiptonville dome is less dramatic between 2.3 and 0.53 ka. During this interval, abandoned channel fill and overbank deposition across the dome suggests that it was not a high-relief feature. One earthquake event occurred during this interval (ca. A.D. 900), but coseismic stream response was probably limited to a slight aggradation of a small flood-plain stream.  相似文献   

20.
In this study, an attempt has been made to evaluate the temporal variations in specific stream power and the total energy available for geomorphic work during the monsoon season for the Tapi River, in central India. Continuous daily discharge data (1978–1990), hydraulic geometry equations and the relationship between discharge and water surface slope were used to compute the daily specific stream power (ω) for the Savkheda gauging site in the lower Tapi Basin. The total amount of energy generated by all the monsoon flows was estimated by integrating the area under the ω-graph derived for the monsoon season.The analyses of the 13-year daily discharge data reveal that the average and maximum ω values range from 4–20 W m− 2, and 22–964 W m− 2 respectively. Specific stream power duration curve derived for the site shows that for 25% of the time the power per unit area is > 10 W m− 2. Furthermore, unit stream power was found to be above the Williams' [Williams, G.P., 1983. Paleohydrological methods and some examples from Swedish fluvial environments. I. Cobble and boulder deposits. Geografiska Annaler 65A, 227–243.] threshold of pebble-movement (1.5 W m− 2), cobble-movement (16 W m− 2) and boulder-movement (90 W m− 2) for 71%, 15% and 2% of the time, respectively. Computations further indicate that the total amount of energy generated by the flows during the monsoon season is in the range of 37 MJ (deficit monsoon years) to 256 MJ (excess monsoon and/or flood years). Large floods have one-third share in the total monsoon energy expenditure. In the absence of appropriate data on the yearwise geomorphic effects, the geomorphic work was evaluated in terms of the total suspended sediment load transported. The total monsoon sediment load is strongly related to the total monsoon energy. The results of the study indicate that the average flow competence and capacity are remarkably higher during wetter monsoon seasons and flood years than during the shorter and drier monsoon seasons.The present analyses demonstrate that the flows are geomorphically effective for a greater part of the monsoon season, except during the deficient monsoon years, and there is little doubt that large-magnitude floods are effective agents of geomorphic change in monsoonal rivers.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号