首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 147 毫秒
1.
《Basin Research》2018,30(Z1):532-549
The Podolia region is located along the western border of the Eastern European Craton, which is also known as Ukrainian Shield. From the Ordovician to the Miocene, this area formed part of an epicontinental basin system. In order to investigate the effects of orogenic cycles occurring along the plate margin, a multi‐disciplinary approach was used in this study. Paleotemperature analysis and low‐temperature thermochronometry were combined with stratigraphic data to obtain a burial model for the Paleozoic succession exposed in the study area. Maximum burial for Silurian and Devonian rocks occurred during the Devonian and Early Carboniferous at depths of 4–5 km, as constrained by vitrinite reflectance and illite content in mixed illite‐smectite layers. Thermochronometric data indicate that exhumation through the 45–120 °C temperature range took place between the Late Triassic and the Early Jurassic, and that no significant burial occurred afterwards (temperatures characterising the stratigraphically lowermost units remaining below ca. 60 °C). These results point to a major exhumation event coeval with the Cimmerian orogenesis, which took place a few hundreds of kilometres away from the study area. On the other hand, no significant effect of the Alpine orogenesis was recorded, although the collisional front was located <100 km from the Podolia region. This work shows how paleothermal and thermochronometric analyses can be successfully integrated with stratigraphic data to reconstruct the burial history, and how the burial history of a basin located on a plate margin can, in some cases, be independent from the distance of the margin from the collisional fronts.  相似文献   

2.
Clay mineral assemblages of the Neogene Himalayan foreland basin are studied to decipher their significance with respect to tectonic and climate processes. Fluvial deposits of the Siwalik Group (west‐central Nepal), and sediment of the Ganga River drainage system were analysed for clay mineralogy. The observed clay mineral assemblages are mainly composed of illite (dominant), chlorite, smectite and kaolinite. Illite and chlorite are chiefly of detrital origin, derived from Himalayan sources. Kaolinite and smectite are authigenic, and mainly developed within pore space and as coating of detrital particles. With increasing burial, diagenetic processes affected the original clay mineral signature. Illitisation of smectite and kaolinite occurred below 2500 and 3500 m depth, respectively. Therefore, illite in the lower parts of the Siwalik Group consists of a mixture of inherited illite and illitised smectite and kaolinite, as suggested by illite crystallinity. Detrital grains that make up the framework of the Siwalik Group sandstones mainly consist of quartz, feldspar and lithic fragments, which are principally of sedimentary and metamorphic origin. Lithoclast content increases over time at the expense of quartz and K‐feldspar in response to uplift and erosion of the Lesser Himalaya Series since about 11–10 Ma. Despite mainly felsic source rocks, dominantly physical erosion processes in the Himalayan belt, and high‐energy fluvial depositional systems, smectite is abundant in the <7 Ma Siwalik Group deposits. Analyses of the Siwalik deposits and comparison with the clay mineralogy of the modern drainage system suggest that smectite preferentially formed in floodplains and intermontane valleys during early diagenesis because of downward percolating fluids rich in cations from weathering and soil development. In general, increasing seasonality and aridity linked to variability of the Asian monsoon from about 8 Ma enhanced clay mineral formation and development of authigenic smectite in paleo‐plains on the southern side of the Himalaya.  相似文献   

3.
Assessing the thermal evolution of sedimentary basins over time is a major aspect of modern integrated basin analysis. While the behavior of clay minerals and organic matter with increasing burial is well documented in different geological and thermal settings, these methods are often limited by the temperature ranges over which they can be precisely applied and by the available material. Here, we explore the emergent Δ47 clumped isotope geospeedometry (based on the diffusional redistribution of carbon and oxygen isotopes in the carbonate lattice at elevated temperatures) to refine time‐temperature paths of carbonate rocks during their burial evolution. This study provides a reconstruction of the thermal and exhumation history of the Upper Cretaceous thrust belt series in the western subalpine massifs (Bauges and Bornes, French Alps) by a new approach combining for the first time available data from three independent geothermometers. The investigated area presents two zones affected by contrasting thermal histories. The most external zone has undergone a relatively mild thermal history (T < 70°C) and does not record any significant clay mineral diagenetic transformation. By contrast, the internal zone has experienced tectonic burial (prealpine nappes) in response to thrusting, resulting in overheating (T > 160–180°C) that induced widespread clay mineral diagenetic transformations (progressive illitization from R0 to R1 and R3 illite‐smectite mixed‐layers), organic matter maturation (oil window) and Δ47 thermal resetting with apparent equilibrium temperatures above 160°C. The three employed geothermal indicators conjointly reveal that the investigated Upper Cretaceous rocks have suffered a wide range of burial temperatures since their deposition, with a thermal maximum locally up to 160–180°C. High temperatures are associated with the tectonic emplacement of up to 4 km of prealpine nappes in the northern part of the studied area. Finally, a forward thermal modeling using Δ47, vitrinite reflectance and clay mineral data, is attempted to precisely refine the burial and exhumation histories of this area.  相似文献   

4.
The diagenetic evolution of Permian (Autunian and Saxonian) and Triassic (Buntsandstein) sandstones and mudrocks have been studied over 1000 m sequence from the Sigüenza 44‐3 drill core in the Iberian Range, Spain. We compare and contrast the diagenetic processes in these different lithologies and the timing of clay mineral formation. Moreover, we establish the relationship between clay mineral diagenesis and reservoir potential. Both the Permian and Triassic successions are characterised by conglomerates, sandstones and interbedded mudstones of fluvial origin that change upwards into distal deposits of a fluvio‐deltaic system. The clay minerals are illite, illite‐smectite mixed layers, kaolinite and dickite. The illite content in all sequences is not related to diminished feldspars; it is owing to the initial detrital mineralogical composition of the Autunian sandstones. The effect of feldspar alteration to kaolin minerals has a strong influence on the lost of porosity‐permeability in the Saxonian facies. In contrast, illite and mixed layers illite‐smectite are the main clay rims preserving porosity in the Buntsandstein sandstones. However, fibrous illite is the dominant pore‐filling in the Permian Autunian facies, closing porosity and permeability. Kaolinite and dickite show opposite trends: dickite increases yet kaolinite decreases from Triassic to Permian sandstones. Dickite replaced kaolinite during burial‐thermal evolution of the succession. The δD and δ18O isotopic signatures from silt and clay fractions indicate a mixture of meteoric and marine waters, and suggest a minimum temperature range between 60 and 150 °C for diagenetic pore fluids. The Permian δD values (?24‰ to ?44‰) are relatively similar to Buntsandstein values (?24‰ to ?37‰). However, the Permian δ18O values (+7.6 and +15.3, average of +13.3‰) are generally higher by ca. 6.2‰ compared to the Buntsandstein data (4.8–10.1‰, average +7.1‰). Such a variation is interpreted as the result of mesodiagenetic pore fluid changes. The extensive dickitisation of kaolinite is attributed to increased hydrogen ions resulting from maturation of organic matter. The vitrinite reflectance of organic matter and the modelled thermal history suggest a maximum burial of 3400 m, accomplished 70 Ma ago. The Permo‐Triassic reached the gas window shortly before major uplift, at 65 Ma, when further maturation and hydrocarbon expulsion ceased.  相似文献   

5.
We present mineralogic, isotopic and thermochronologic analyses on psammopelitic and tuffaceous levels from the Bermejo and Vinchina basins – both foreland depocentres of the Central Andes of Argentina – that define a low‐temperature regime for the crust akin to a slab shallowing and flattening process. The contents of illite in illite/smectite interstratified (I/S) show a progressive illitization into the deeper parts of both basins. The distribution of I/S is compatible with theoretical simulations and predicted heat flow values of ca. 26 mW m?2 in the 8–3.4 Ma interval for the Vinchina Basin and ca. 42 mW m?2 since 9 Ma for the Bermejo Basin. The latter shows heat flow values that are comparable to those reported by magnetotelluric analysis (36–40 mW m?2) in agreement with previously published heat flow calculations along the modern Andean foreland. The Rb–Sr isochrones in psammopelites (<2 μm fractions) show ages between 125 and 165 Ma, whereas the K–Ar ages decrease as the grain size is smaller (136–224 Ma for 1–2 μm, 112–159 Ma for 0.2–1 μm, 76–116 Ma for <0.2 μ and 39.3–42 Ma for <0.1 μm). These ages are significantly older than the sedimentation in the basins (ca. 16 Ma for the Vinchina Basin; U–Pb age), and can be explained by the presence of a significant amount of detrital components, mainly illite, even in the finer fractions. The preservation of detrital ages is consistent with the shallow diagenesis related to a low‐temperature regime, proposed here for the basins. Younger K–Ar ages (21.3–12 Ma) were obtained for a basal tuffaceous level. Clay mineralogy and R0 ordering in the deepest part of the Vinchina Basin, together with the evolution model of I/S with depth, suggest that the burial temperatures would have not exceeded ca. 100°C in agreement with (U–Th)/He analyses performed on apatite extracted from two tuffaceous units. Thermal indicators from both studied basins confirm the existence of a low‐temperature regime during flat subduction.  相似文献   

6.
The Paleoproterozoic (Statherian) Thelon Basin is located in the Churchill Province of the Canadian Shield, formed following the Trans‐Hudson Orogeny. Basin formation followed an interval of felsic volcanism and weathering of underlying bedrock. The diagenetic evolution of the Thelon lasted about one billion years and was punctuated by fluid movement influenced by tectonic events. Early quartz cements formed in well‐sorted, quartz‐rich facies during diagenetic stage 1; fluids in which these overgrowths formed had δ18O values near 0‰ (Vienna Standard Mean Ocean Water). Uranium‐rich apatite cement (P1) also formed during diagenetic stage 1 indicating that oxygenated, uranium‐bearing pore water was present in the basin early in its diagenetic history. Syntaxial quartz cement (Q1) formed in water with δ18O from ?4 to ?0.8‰ in diagenetic stage 2. Diagenetic stage 3 occurred when the Thelon Formation was at ca. 5 km depth, and was marked by extensive illitization, alteration of detrital grains, and uranium mineralization. Basin‐wide, illite crystallized at ～200 °C by fluids with δ18O values of 5–9‰ and δD values of ?60 to ?31‰, consistent with evolved basinal brines. Tectonism caused by the accretion of Nena at ca. 1600 Ma may have provided the mechanism for brine movement during deep burial. Diagenetic stage 4 is associated with fracturing and emplacement of mafic dikes at ca. 1300 Ma, quartz cement (Q3) in fractures and vugs, further illitization, and recrystallization of uraninite (U2). Q3 cements have fluid inclusions that suggest variable salinities, δ18O values of 1.5–9‰, and δD values of ?97 to ?83‰ for stage 4 brines. K‐feldspar and Mg‐chlorite formed during diagenetic stage 5 at ca. 1000 Ma in upper stratigraphic sequences, and in the west. These phases precipitated from low‐temperature, isotopically distinct fluids. Their distribution indicates that the basin hydrostratigraphy remained partitioned for >600 Ma.  相似文献   

7.
The K/Ar ages of illite/smectite (I/S) were measured from Middle Ordovician K-bentonites both west and east of the present crest of the Cincinnati Arch and the Nashville dome to test a previous hypothesis that I/S formed by reaction with migrated saline solutions during the Alleghanian Orogeny. The K/Ar ages of I/S at the distal margin of the southern Appalachian basin and from central Indiana range from 251 to 277 Ma. However, the ages of I/S from west of the crest of the Cincinnati Arch are slightly older (286–301 Ma) and the ages of I/S from north-eastern Indiana, on the northern edge of the Kankakee Arch and in effect in the Michigan basin, are the oldest measured in this study (315–325 Ma). The westward decrease in the K/Ar ages of I/S from Late Pennsylvanian ages in the proximal basin (286–303 Ma) to Permian (251–277 Ma) at the distal margin suggest that I/S was formed by the westward migration of fluids during the Alleghanian Orogeny as opposed to being formed by projected deep burial by Permian sediments. Moreover, the available thermal maturation data suggest the Cincinnati Arch was not buried deeply. The ages of I/S west of the Cincinnati Arch are an enigma as they are older than the ages in the distal Appalachian basin. The ages of I/S from central Indiana within the Illinois basin suggest the possibility that I/S was formed by reaction with fluids that migrated from the Ouachita orogenic belt in Mississippi. The oldest ages of I/S from north-eastern Indiana suggest the formation of I/S might have been influenced by the presence of potassic brines from the Michigan basin.  相似文献   

8.
Paleothermal indicators based on clay mineral and organic matter analyses, were integrated with mudrock geochemistry and stratigraphic data to define the sedimentary evolution of the southwestern Thrace Basin during the Eocene to Oligocene. This multi‐method approach allowed us to reconstruct the burial evolution of the basin in Eocene and Oligocene times and to study the mudrock composition and relate this to their provenance and source area weathering. The studied mudrocks show similar chemical variations. The distribution of some major and trace elements for the studied samples reflect heterogeneous source areas containing both felsic to mafic rocks. In particular, the Light Rare Earth Elements/Transition elements (LREEs/TEs) ratios are very high for the Avdira and Organi samples (on the average between 1.5 and 2.2 for (La + Ce)/Cr and 3.5–8 for (La + Ce)/Ni), suggesting a felsic source(s), and very low for the Samothraki, Limnos, Paterma and Iasmos samples (on the average between 0.4 and 0.6 for (La + Ce)/Cr and 0.6–1 for (La + Ce)/Ni), suggesting a mainly basic source(s). The mineralogical composition coupled with the A‐CN‐K and A‐N‐K plots suggest a complex evolution. The clay mineral data (illite percentage in I/S and the stacking order R and the Kübler Index) coupled to vitrinite reflectance analysis indicate a high to intermediate diagenetic grade for the Middle to Upper Eocene samples (from Iasmos, Gratini, Organi, Paterma, Esimi and Samotraki sections) and a low diagenetic grade for the Upper Eocene to Oligocene samples (from Limnos and Avdira sections). These data helped in interpreting the geodynamic evolution of the studied basins where the magmatic activity plays an important role. In particular, Middle to Upper Eocene sediments show high to intermediate diagenetic grade since they are located in a portion of the basin dominated by Eocene to Oligocene magmatic activity and intrusion of granitoids, whereas, the Upper Eocene to Oligocene sediments are not involved in important magmatic activity and intrusion of granitoids and, thus, show low diagenetic grade. Furthermore, Middle to Upper Eocene sediments experienced deeper burial processes caused by lithostatic load, rather than the uppermost Eocene and Oligocene sediments, in relation of their position along the stratigraphic succession. These data suggest a burial depth of at least 3–4 km with a tectonic exhumation mainly related to the extensional phases of the Miocene age.  相似文献   

9.
Geothermal resources hosted within sedimentary basins with high natural permeability have been targeted for the production of energy in Australia. The Hutton Sandstone (Cooper‐Eromanga Basin) – a prolific oil and gas producer known to have good reservoir quality and high reservoir volume – was recently tested for its geothermal potential in the Cooper Region. However, recent exploratory drilling did not produce the anticipated flow rates, raising the question of the impact of diagenesis on the reservoir quality of this sedimentary formation. The combined characterization of the petrology, diagenesis and petrophysical properties of the Hutton Sandstone at Celsius‐1 and other surrounding wells indicates variable reservoir properties in the Cooper Region. This integrated study demonstrates that low formation permeability occurs at geothermal target depth and explains the negligible flow rates obtained at Celsius‐1. These low permeabilities are the results of the preservation of widespread detrital clayey matrix and the extensive occurrence of authigenic kaolinite, illite and silica cements at the top and base of the Hutton Sandstone. This aspect is confirmed by NMR T2 transversal relaxation time becoming shorter at similar depths. Petrography analysis also reveals that sandstones are affected by diagenetic processes of the eogenetic and mesogenetic phases. However, the Hutton Sandstone at Celsius‐1 is presently at pressure‐temperature conditions that are below the mesogenetic conditions, which suggests a late episode of uplift and cooling from maximum palaeotemperatures.  相似文献   

10.
Aqueous and petroleum fluid flow associated with sand injectites   总被引：1，自引：0，他引：1  
Field, petrographic and fluid inclusion characteristics of sand injectites from five outcrop localities and from the subsurface of the Tertiary of the south Viking Graben are described. Although the case studies are from a wide variety of sedimentological, stratigraphic and tectonic settings, and hence their diagenetic evolutions differ significantly, it is possible and useful to assign diagenetic events to three distinct phases of fluid flow associated with sand injectites in sedimentary basins. Firstly, there is fluid flow associated with the injection of the fluid–sediment mix during shallow burial. Early diagenetic imprints in sand injectites reveal that basinal fluids, which may be released during movement along deeper‐seated faults, can be associated with this process and thus the injection process may reveal information on the timing of basin‐scale movement of fluids. Secondly, following the injection process, basinal fluids continue to migrate through uncemented injectites and mix with the ambient meteoric and/or marine pore fluids that invade injectites from the overlying and surrounding host sediments. Early, often pervasive, carbonate cementation is common within sand injectites and rapidly turns sand injectites into flow barriers during shallow (<1 km) burial. If early carbonate cementation is not pervasive, fluid inclusions in late quartz cement (～>2 km of burial) reveal additional information on fluid flow associated with sand injectites during deeper burial. The latest phase of fluid flow occurs when sand injectites are reactivated as preferential fluid conduits during phases of deformation, when well‐cemented subvertical sand injectites become sites of focussed brittle deformation (fracturing). This study shows that sand injectites are a common and volumetrically important type of structural heterogeneity in sedimentary basins and that long‐lived fluid flow associated with sand injectites in very different settings can be assessed and compared systematically using a combination of petrography and fluid inclusion studies.  相似文献   

11.
As the highest part of the central Andean fold‐thrust belt, the Eastern Cordillera defines an orographic barrier dividing the Altiplano hinterland from the South American foreland. Although the Eastern Cordillera influences the climatic and geomorphic evolution of the central Andes, the interplay among tectonics, climate and erosion remains unclear. We investigate these relationships through analyses of the depositional systems, sediment provenance and 40Ar/39Ar geochronology of the upper Miocene Cangalli Formation exposed in the Tipuani‐Mapiri basin (15–16°S) along the boundary of the Eastern Cordillera and Interandean Zone in Bolivia. Results indicate that coarse‐grained nonmarine sediments accumulated in a wedge‐top basin upon a palaeotopographic surface deeply incised into deformed Palaeozoic rocks. Seven lithofacies and three lithofacies associations reflect deposition by high‐energy braided river systems, with stratigraphic relationships revealing significant (～500 m) palaeorelief. Palaeocurrents and compositional provenance data link sediment accumulation to pronounced late Miocene erosion of the deepest levels of the Eastern Cordillera. 40Ar/39Ar ages of interbedded tuffs suggest that sedimentation along the Eastern Cordillera–Interandean Zone boundary was ongoing by 9.2 Ma and continued until at least ～7.4 Ma. Limited deformation of subhorizontal basin fill, in comparison with folded and faulted rocks of the unconformably underlying Palaeozoic section, implies that the thrust front had advanced into the Subandean Zone by the 11–9 Ma onset of basin filling. Documented rapid exhumation of the Eastern Cordillera from ～11 Ma onward was decoupled from upper‐crustal shortening and coeval with sedimentation in the Tipuani‐Mapiri basin, suggesting climate change (enhanced precipitation) or lower crustal and mantle processes (stacking of basement thrust sheets or removal of mantle lithosphere) as possible controls on late Cenozoic erosion and wedge‐top accumulation. Regardless of the precise trigger, we propose that an abruptly increased supply of wedge‐top sediment produced an additional sedimentary load that helped promote late Miocene advance of the central Andean thrust front in the Subandean Zone.  相似文献   

12.
Quantifying the Cenozoic growth of high topography in the Indo‐Asian collision zone remains challenging, due in part to significant shortening that occurred within Eurasia before collision. A growing body of evidence suggests that regions far removed from the suture zone experienced deformation before and during the early phases of Himalayan orogenesis. In the present‐day north‐eastern Tibetan Plateau, widespread deposits of Cretaceous sediment attest to significant basin formation; however, the tectonic setting of these basins remains enigmatic. We present a study of a regionally extensive network of sedimentary basins that are spatially associated with a system of SE‐vergent thrust faults and are now exposed in the high ranges of the north‐eastern corner of the Tibetan Plateau. We focus on a particularly well‐exposed basin, located ～20 km north of the Kunlun fault in the Anyemaqen Shan. The basin is filled by ～900 m of alluvial sediments that become finer‐grained away from the basin‐bounding fault. Additionally, beds in the proximal footwall of the basin‐bounding fault exhibit progressive, up‐section shallowing and several intraformational unconformities which can be traced into correlative conformities in the distal part of the basin. The observations show sediment accumulated in the basin during fault motion. Regional constraints on the timing of sediment deposition are provided by both fossil assemblages from the Early Cretaceous, and by K–Ar dating of volcanic rocks that floor and cross‐cut sedimentary fill. We argue that during the Cretaceous, the interior NE Tibetan Plateau experienced NW–SE contractional deformation similar to that documented throughout the Qinling–Dabie orogen to the east. The Songpan‐Ganzi terrane apparently marked the southern limit of this deformation, such that it may have been a relatively rigid block in the Tibetan lithosphere, separating regions experiencing deformation north of the convergent Tethyan margin from regions deforming inboard of the east Asian margin.  相似文献   

13.
  相似文献   

14.
沉积物中粘土矿物类型主要有自生粘土矿物和碎屑粘土矿物。其中,自生粘土矿物含量较少,是在沉积环境中形成,可能是沉积再循环或成岩作用的产物,可作为沉积环境某方面的指示标志;而碎屑粘土矿物是母岩风化的产物,受沉积环境影响较小,能够有效示踪物源区化学风化过程,进而反映古气候变化。近年来利用碎屑粘土矿物特征来重建物源区古气候的方法得到了广泛的应用。然而,由于粘土矿物主要存在于<2 μm硅酸盐粘粒中,粘土矿物的提取、鉴定比较困难,且自生粘土矿物易受沉积环境等的影响。因此,在利用粘土矿物重建古气候变化时,需慎重选择粘土矿物的提取方法,并考虑物源和沉积环境变化以及成岩作用等对粘土矿物解释的影响。本文以柴达木盆地东北缘怀头他拉剖面硅酸盐粘土矿物的提取、鉴定及其古环境指示意义为例,介绍粘土矿物的提取及应用,为后期粘土矿物研究提供参考。  相似文献   

15.
《Basin Research》2018,30(5):835-862
We used detrital zircon U/Pb geochronology and apatite (U–Th–Sm)/He thermochronology to better constrain depositional ages and sedimentation rates for the Pliocene Productive Series in Azerbaijan. U/Pb analysis of 1,379 detrital zircon grains and (U–Th–Sm)/He analysis of 57 apatite grains—from Kirmaky Valley and Yasamal Valley onshore sections, Absheron Peninsula—yielded two distinct sub‐populations: “young” Neogene grains and “old” Mesozoic, Palaeozoic and Proterozoic/Archean grains. The large numbers of Neogene age grains (around 10% of all grain ages) provided a new absolute age constraint on the maximum depositional age of the Lower Productive Series of 4.0 Myr. These “young” Neogene zircon grains most likely originated from volcanic ash falls sourced from the Lesser Caucasus or Talesh Mountains. In this paper we propose a timescale scenario using the maximum depositional age of the Productive Series from detrital zircon grain U/Pb constraints. Potential consequences and limitations of using apatite (U–Th–Sm)/He dating method in estimating maximum depositional ages are also discussed. These new age constraints for the Lower Productive Series gave much faster sedimentation rates than previously estimated: 1.3 km/Myr in the South Caspian Basin margin outcrops and up to 3.9 km/Myr in the basin centre. The sedimentation rates are one of the highest in comparison to other sedimentary basins and coeval to global increase in sedimentation rates 2–4 Myr. The older group of detrital zircon grains constitutes the majority of grains in all sample sets (~80%). These older ages are inferred to reflect the provenance of the Productive Series sediment. This sediment is interpreted to have been derived from the Proterozoic and Archean crystalline basement rocks and Phanerozoic cover of the East European Craton, Proterozoic/Palaeozoic rocks of the Ural Mountains and Mesozoic sedimentary rocks of the Greater Caucasus. This sediment was likely supplied from northerly sourced drainage that emptied into the South Caspian Basin.  相似文献   

16.
１ＩｎｔｒｏｄｕｃｔｉｏｎＡｓｐａｒｔｏｆｅｘｔｅｎｓｉｖｅｌａｔｅＰｒｏｔｅｒｏｚｏｉｃｍｏｂｉｌｅｂｅｌｔｏｆＥａｓｔＡｎｔａｒｃｔｉｃａ,ｔｈｅｕｐｐｅｒａｍｐｈｉｂｏｌｉｔｅｔｏｇｒａｎｕｌｉｔｅｆａｃｉｅｓｈｉｇｈ－ｇｒａｄｅｍｅｔａｍｏｒ...  相似文献   

17.
本文对东南极拉斯曼丘陵出露的石榴斜长角闪岩中的角闪石进行了４０Ａｒ－３９Ａｒ年龄测定,分别得到角闪石视年龄１５８６Ｍａ、１０１１～１０８０Ｍａ、７６１Ｍａ和５２９～５８２Ｍａ,角闪石坪年龄１０３６Ｍａ和５５４Ｍａ,角闪石Ａｒ－Ａｒ等时线年龄１０１０Ｍａ,这些同位素年龄证据,首次完整地记录了该区所经历的几乎所有构造变质热事件,为近几年国内外地质学家关于该区构造变质热事件争论的焦点问题,即晚元古代的１０００Ｍａ格林维尔事件（Ｇｒｅｎｖｉｌｉａｎ）与早古生代的５００Ｍａ泛非事件（Ｐａｎ－Ａｆｒｉｃａｎ）孰轻孰重以及前者是否存在,提供了答案。角闪石的４０Ａｒ－３９Ａｒ年龄测定结果表明,拉斯曼丘陵地区经历了复杂的多期变质演化历史,其原岩可能形成于早－中元古代,占主导地位的应该是晚元古代的１０００Ｍａ格林维尔事件,而５００Ｍａ泛非事件则是晚期较强烈的变质热事件。  相似文献   

18.
The tectonic evolution of the Tian Shan, as for most ranges in continental Asia is dominated by north‐south compression since the Cenozoic India‐Asia collision. However, precollision governing tectonic processes remain enigmatic. An excellent record is provided by thick Palaeozoic – Cenozoic lacustrine to fluvial depositional sequences that are well preserved in the southern margin of the Junggar Basin and exposed along a foreland basin associated to the Late Cenozoic rejuvenation of the Tian Shan ranges. U/Pb (LA‐ICP‐MS) dating of detrital zircons from 14 sandstone samples from a continuous series ranging in age from latest Palaeozoic to Quaternary is used to investigate changes in sediment provenance through time and to correlate them with major tectonic phases in the range. Samples were systematically collected along two nearby sections in the foreland basin. The results show that the detrital zircons are mostly magmatic in origin, with some minor input from metamorphic zircons. The U‐Pb detrital zircon ages range widely from 127 to 2856 Ma and can be divided into four main groups: 127–197 (sub‐peak at 159 Ma), 250–379 (sub‐peak at 318 Ma), 381–538 (sub‐peak at 406 Ma) and 543–2856 Ma (sub‐peak at 912 Ma). These groups indicate that the zircons were largely derived from the Tian Shan area to the south since a Late Carboniferous basin initiation. The provenance and basin‐range pattern evolution of the southern margin of Junggar Basin can be generally divided into four stages: (1) Late Carboniferous – Early Triassic basin evolution in a half‐graben or post‐orogenic extensional context; (2) From Middle Triassic to Upper Jurassic times, the southern Junggar became a passively subsiding basin until (3) being inverted during Lower Cretaceous – Palaeogene; (4) During the Neogene, a piedmont developed along the northern margin of the North Tian Shan block and Junggar Basin became a true foreland basin.  相似文献   

19.
利用X衍射法分析了苏北平原浅钻剖面(YZ1)的粘土矿物类型和含量,并对其环境意义进行了探讨。结果表明,YZ1浅钻沉积物粘土成分主要由4种粘土矿物(伊利石、高岭石、绿泥石、蒙脱石)和少量长石、石英碎屑组成;研究区的古气候环境演变主要经历3个阶段,13 770~11 600 cal a B.P.期间的低温冷干阶段;11 600~9 610cal a B.P.期间的逐步升温阶段;9 610~1 520 cal a B.P.期间的全新世暖湿阶段,在这3个大的阶段背景条件下也存在一些次级波动。  相似文献   

20.
Data acquired from petroleum exploration well 164/7‐1 drilled in the UK sector of the Rockall Trough have yielded fresh insights into the igneous and thermal history of this frontier region. The well targeted a large four‐way dip closed structure of presumed Mesozoic age named ‘The Dome Prospect’. The structure is now known to have a magmatic, rather than a purely structural origin, which was the preferred pre‐well interpretation. The well encountered 1.2 km of Palaeocene age basaltic lavas, overlying Late Cretaceous mudstones which were intruded by over 70 dolerite sills ranging from <1.5‐ to 152‐m thick. 40Ar/39Ar dating of the dolerite intrusions indicates an Early Palaeocene age (63–64±0.5 Ma), which are among the oldest 40Ar/39Ar dates recognised in the North Atlantic Igneous Province. Radiometric dating of the overlying basaltic lavas proved unsuccessful, because of excessive alteration. Biostratigraphic dating of underlying and overlying sedimentary strata was utilised to constrain the age of the lavas to Late Paleocene to Early Eocene age (～55 Ma). Despite being related to two distinct events separated by ～8 Ma, the intrusives and extrusives are compositionally similar. The basaltic rocks from well 164/7‐1 possess Sr–Nd isotopic, major and trace‐element geochemical compositions similar to other volcanic and intrusive rocks of the British Tertiary Igneous Province and represent partial melts of both lithospheric and asthenospheric mantle associated with the proto‐Icelandic mantle plume head. Joint consideration of thermal maturity, potential fields and 3D seismic data indicate a deeper igneous body in addition to the sills encountered in well 164/7‐1. Jack‐up and arching mechanisms associated with both scales of intrusive body are believed to have developed the dome structure. The preferred interpretation is of a mafic laccolith, 17 km in diameter, ～7 km thick, intruded at 64.5 Ma, situated ～2.5 km below the bottom of the well. 3D thermal modelling suggests that all of Tranche 52 was thermally affected by the intrusion of the magmatic body. The thermal aureole, between 27 and 51 km in diameter, is not thought to play an important role in the hydrocarbon prospectivity of the surrounding Tranches in the NE Rockall Basin. Results show that hydrocarbon exploration prospects that are circular in map view should be interpreted with caution on volcanic continental margins. In sedimentary basins, where salt domes and shale diapirs are absent and igneous rocks prevalent, periclinal structures such as ‘The Dome Prospect’ should undergo a thorough multi‐disciplinary risk assessment.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号