共查询到20条相似文献，搜索用时 78 毫秒
1.
2.
3.
拟合推估法用于似大地水准面拟合时会遇到观测噪声和信号之间权比的不协调,导致观测权阵和信号向量的权矩阵比例不合理,将直接影响固定效应参数和随机信号参数的估值。当观测值含有粗差时,会使结果严重扭曲。基于此,文中将抗差Helmert方差分量估计用于似大地水准面拟合中,可自适应调整观测噪声与信号之间的权比,同时又可抵御粗差的影响。采用某山区的实测数据进行试算,外符合检验结果表明:采用自适应拟合推估法构建的似大地水准面外符合精度较正常拟合推估方法提高1cm多,且解较稳定。同时,抗差自适应拟合推估不仅有效抵御粗差的影响,而且可以调整二者权比,结果更加合理。 相似文献
4.
5.
针对三维激光扫描中点云不等精度且易受粗差影响的问题,提出了一种基于入射角定权的抗差加权总体最小二乘的拟合方法。该方法在采用入射角定权的基础上,进行基于标准化残差和中位数的抗差加权整体最小二乘估计,获得待定参数估值,并通过Gauss-Newton迭代算法,推导了模型的迭代计算方法。以平面拟合和球面拟合为例,分别通过仿真数据和实测数据对算法进行验证,结果表明,对于含有粗差的点云,新方法可以获得更为理想的参数估值,其性能优于抗差整体最小二乘和加权整体最小二乘,可以更好地进行三维激光扫描的点云拟合。 相似文献
6.
《测绘科学技术学报》2020,(1)
由于数据探测法、多维粗差同时定位与定值法、拟准检定法以及部分最小二乘法不能同时解算待估参数和粗差,提出了基于选权拟合的粗差参数化平差模型。首先推导了选权拟合的等价模型;在此基础上提出了参数化粗差的平差模型。由于粗差参数化之后观测系统呈现出不适定性,因此,对非粗差部分采取平方和最小的约束,实际上是构造虚拟观测方程。但是,由于事先并不知道粗差的位置,提出了通过搜索来构造虚拟观测方程系数矩阵的方法。算例表明,这种方法用于GPS单点定位可以有效地消除粗差观测的影响。 相似文献
7.
将抗差估计的思想融入到粗差探测的算法中,设计出对模型误差,特别是粗差具有抵抗能力的粗差探测算法。基于验后方差估计原理导出的选权迭代法即为抗差估计的一种,首先是应用最小二乘法来计算观测值的参数x赞、残差v、协因数阵Qvv及单位权Q赞0的初值,然后再根据残差和有关的参数,按所选择的权函数,计算每个观测值的权,经过迭代计算求得观测值的残差,然后按照统计检验的方法剔除粗差。通过实验证明,基于验后方差估计原理导出的选权迭代具有很强的粗差探测能力。 相似文献
8.
部分变量误差模型(partial EIV model)的加权整体最小二乘(weighted total least-squares,WTLS)估计不具备抵御粗差的能力。鉴于粗差可能同时出现在观测值和系数矩阵中,本文在提出部分变量误差模型WTLS估计的两步迭代解法的基础上,运用抗差M估计的等价权方法,发展了一种整体抗差最小二乘(TRLS)估计方法,并采用一致最大功效统计量确定降权因子。针对WTLS估计两步迭代解法的特点,设计了两个不同的降权方案:第1个方案是在估计系数矩阵元素时,不对观测值降权,仅对系数矩阵降权;第2个方案是在估计系数矩阵元素时,既对系数矩阵降权,同时也对观测值降权。通过对模拟2D仿射变换和线性拟合实例进行计算和分析,结果表明第1方案优于第2方案,并且优于基于残差和验后单位权方差的抗差估计和现有的变量误差模型抗差估计。 相似文献
9.
三维激光扫描技术在建筑物表面测量中已经得到越来越多的应用,针对平面点云中的小粗差在抗差估计中难以剔除的问题,将IGGⅢ权函数与加权总体最小二乘法相结合,提出了IGGⅢ权函数抗差估计方法。分别采用验后方差估计法、Huber权函数抗差估计法、IGGⅢ权函数抗差估计法对两组点云进行平面拟合计算。结果表明,通过对IGGⅢ权函数抗差估计模型中K0、K1的设置,可以有效地将点云进行分层定权处理,与验后方差估计法相比,通过多次迭代过程,有效降低淘汰段的小粗差对点云平面拟合的影响。与Huber权函数抗差估计法相比,IGGⅢ权函数抗差估计法对可疑段的过大误差进行降权处理,使其平面拟合精度更高。 相似文献
10.
当观测数据中存在粗差时,使用经典的最小二乘算法往往不能得到高精度的参数解,此时需要使用具有抗差估计的算法。基于验后方差的选权迭代法,克服了单位权方差未知或者权函数靠经验选取的情况,利用验后方差检验求出方差异常大(即含粗差)的观测值,然后通过不断的迭代,使含粗差的权逐渐趋于一个较小的数,最终实现粗差的探测和改正。结合工程实例,分别比较了不含粗差和含粗差的情况下,利用经典最小二乘法与本文所提的基于验后方差原理的选权迭代法进行平差,结果表明,二者的平差结果相差在1mm以内,解算精度相当。 相似文献
11.
Monitoring drought dynamics in the Aravalli region (India) using different indices based on ground and remote sensing data 总被引：5，自引：0，他引：5
C. Bhuiyan R.P. Singh F.N. Kogan 《International Journal of Applied Earth Observation and Geoinformation》2006,8(4):289-302
The hard-rock hilly Aravalli terrain of Rajasthan province of India suffers with frequent drought due to poor and delayed monsoon, abnormally high summer-temperature and insufficient water resources. In the present study, detailed analysis of meteorological and hydrological data of the Aravalli region has been carried out for the years 1984–2003. Standardised Precipitation Index (SPI) has been used to quantify the precipitation deficit. Standardised Water-Level Index (SWI) has been developed to assess ground-water recharge-deficit. Vegetative drought indices like Vegetation Condition Index (VCI) and Temperature Condition Index (TCI) and Vegetation Health Index (VHI) have been computed using NDVI values obtained from Global Vegetation Index (GVI) and thermal channel data of NOAA AVHRR satellite. Detailed analyses of spatial and temporal drought dynamics during monsoon and non-monsoon seasons have been carried out through drought index maps generated in Geographic Information Systems (GIS) environment. Analysis and interpretation of these maps reveal that negative SPI anomalies not always correspond to drought. In the Aravalli region, aquifer-stress shifts its position time to time, and in certain pockets it is more frequent. In comparison to hydrological stress, vegetative stress in the Aravalli region is found to be slower to begin but quicker to withdraw. 相似文献
12.
地理数据库的关系模型及其实现 总被引：1，自引：0，他引：1
本文从以图论观点分析地理实体入手,系统阐述了地理数据库关系模型的设计法和过程。作者于1984年4～9月间在微型机上设计建立了关系型地理数据库的实方验系统(RGDB)。该系统采用了本文提出的关系模型,采用了可动态扩库的子库组合结构,这种结构具有灵活性和提高空间利用率的优点。RGDB含有多种功能的数据操作命令,除了具有一般检索功能外,还能进行“开窗”选取和十分“自由”的映象选取。本文对RGDB系统的主要性能和实现途径作了扼要介绍。 相似文献
13.
随着城市面貌日新月异,地下管网的建设也在持续推进,作为城市的地下“神经网络”,全天24 h保障城市的正常运转和发展。本文以实现城市管网管理系统的高可用、无插件、智能化为目标,采用“地上地下一体”“二三维一体”的设计理念,研究基于WebGL的三维智慧管网系统的关键技术,实现了管线设施管理的信息数字化、空间化与图形化。 相似文献
14.
SVG是一种基于XML的用来描述二维矢量图形和矢量/栅格混合图形的标记语言,虽然SVG不是为了面向地理空间数据发布而制定的标准,但它的许多特性都能被广泛地应用到WebGIS中,从而实现矢量WebGIS。由于SVG通过简单的文本语句描述矢量图像,所以SVG通常数据量很小,并且SVG支持GZIP压缩,所以基于SVG构建WebGIS能减轻网络传输负载,加快地图显示速度。SVG内置了对JavaScript的支持,且SVG可通过DOM解析映像成内存中的树型结构,所以客户层可通过JavaScript对DOM的操作实现对地图的缩放、漫游、查询、图层控制等交互操作。 相似文献
15.
本文在讨论DDE技术的基础上，对MapInfo的DDE机制的实现作了探讨和分析。根据技园区域GIS的实际开发工作，介绍了利用DDE技术在MapInfo中成功地集成Foxpro和Autocad. 相似文献
16.
遥感技术在土地利用动态监测中的应用 总被引：8，自引：0，他引：8
金时华 《测绘与空间地理信息》2006,29(1):98-101
主要论述遥感技术在土地监测中的应用,以某地区土地利用动态遥感监测研究项目的运作过程为例进行阐述。首先介绍了土地利用动态监测的具体内容和技术路线。其次,对数据预处理与信息采集的方法与手段进行了探讨。最后,对作业的内、外业主要过程以及应提交的成果作了介绍。 相似文献
17.
18.
Automatic 3D extraction of building roofs from remotely sensed data is important for many applications including city modelling. This paper proposes a new method for automatic 3D roof extraction through an effective integration of LIDAR (Light Detection And Ranging) data and multispectral orthoimagery. Using the ground height from a DEM (Digital Elevation Model), the raw LIDAR points are separated into two groups. The first group contains the ground points that are exploited to constitute a ‘ground mask’. The second group contains the non-ground points which are segmented using an innovative image line guided segmentation technique to extract the roof planes. The image lines are extracted from the grey-scale version of the orthoimage and then classified into several classes such as ‘ground’, ‘tree’, ‘roof edge’ and ‘roof ridge’ using the ground mask and colour and texture information from the orthoimagery. During segmentation of the non-ground LIDAR points, the lines from the latter two classes are used as baselines to locate the nearby LIDAR points of the neighbouring planes. For each plane a robust seed region is thereby defined using the nearby non-ground LIDAR points of a baseline and this region is iteratively grown to extract the complete roof plane. Finally, a newly proposed rule-based procedure is applied to remove planes constructed on trees. Experimental results show that the proposed method can successfully remove vegetation and so offers high extraction rates. 相似文献
19.
遥感和GIS技术应用于伊拉克南部Basrah省土地利用/覆盖变化及城市扩张研究(英文) 总被引：2，自引：0，他引：2
In recent years, land use/cover dynamic change has become a key subject that needs to be dealt with in the study of global
environmental change. In this paper, remote sensing and geographic information systems (GIS) are integrated to monitor, map,
and quantify the land use/cover change in the southern part of Iraq (Basrah Province was taken as a case) by using a 1:250
000 mapping scale. Remote sensing and GIS software were used to classify Landsat TM in 1990 and Landsat ETM+ in 2003 imagery
into five land use and land cover (LULC) classes: vegetation, sand, urban area, unused land, and water bodies. Supervised
classification and normalized difference build-up index (NDBI) were used respectively to retrieve its urban boundary. An accuracy
assessment was performed on the 2003 LULC map to determine the reliability of the map. Finally, GIS software was used to quantify
and illustrate the various LULC conversions that took place over the 13-year span of time. Results showed that the urban area
had increased by the rate of 1.2% per year, with area expansion from 3 299.1 km2 in 1990 to 3 794.9 km2 in 2003. Large vegetation area in the north and southeast were converted into urban construction land. The land use/cover
changes of Basrah Province were mainly caused by rapid development of the urban economy and population immigration from the
countryside. In addition, the former government policy of “returning farmland to transportation and huge expansion in military
camps” was the major driving force for vegetation land change. The paper concludes that remote sensing and GIS can be used
to create LULC maps. It also notes that the maps generated can be used to delineate the changes that take place over time.
Supported by the Al-Basrah University, Iraq, the Geo-information Science and Technology Program (No. IRT 0438)China). 相似文献