共查询到20条相似文献，搜索用时 46 毫秒
1.
提出了一种利用动基线求解卫星无线电测定业务RDSS(Radio Determination Satellite Service)定向技术中单差整周模糊度的方法.接收机首先在基线处于某一初始状态下测量两颗卫星的载波相位单差,然后旋转基线两个较小角度,并分别测量不同状态下两颗卫星的载波相位单差.通过两次旋转获得的各基线状态之间的关系获得旋转平面,进而求得初始状态下的基线矢量.将求得的基线矢量初值代入单差观测方程可求得整周模糊度.整周模糊度的求解精度与基线长度、基线初始状态方位角以及基线转角等多种因素有关.仿真分析表明,当基线长度为3 m,基线两次旋转角度分别为30°,基线初始状态方位角在(0°,120°)和(180°,300°)范围内时,都可以正确求解整周模糊度. 相似文献
2.
设计了一种短基线情况下双差模糊度的实时解算方法,利用双频载波相位的两个长波组合φ-3,4和φ4,-5,通过坐标初始值约束和双频信号之间的相关关系,可快速求解模糊度,采用抗差自适应滤波来提高模糊度求解的可靠性及定位精度。该方法对监测点初始点位误差的要求可放宽至50cm,适合于变形幅度较大的动态监测系统。 相似文献
3.
4.
5.
北斗二代系统伪距码中存在与高度角相关的系统性偏差,该偏差会影响高精度的数据处理。基于Melbourne-Wübbena（MW）组合,分别利用现有的伪距码偏差改正模型和实测基线的双差宽巷模糊度残差,分析了伪距码偏差对基线解算的影响。理论分析表明,随着基线长度的增加,伪距码偏差对MW组合确定双差宽巷模糊度的影响越来越大,对300 km基线的影响可达0.36周。实际算例表明,无论基线长短,地球同步轨道（geostationary earth orbit,GEO）卫星的双差宽巷模糊度残差中始终存在偏差;而对于倾斜地球同步轨道（inclined geostationary orbit,IGSO）和中轨（medium earth orbit,MEO）卫星而言,当基线小于300 km时,双差基本可以消除伪距码偏差,其双差宽巷模糊度固定率基本和GPS一致,但当基线超过300 km时,部分卫星的双差宽巷模糊度残差就会存在明显偏差,其双差宽巷模糊度固定率也较低,此时需考虑伪距码偏差的影响。 相似文献
6.
7.
8.
9.
针对不存在先验信息时常规GPS单历元数据处理中存在的问题,提出了一种新的GPS整周模糊度单历元算法.该算法先采用一个历元的码观测值进行最小二乘定位,求取初始模糊度,并根据解的中误差来构造模糊度原始搜索空间,再采用两种不同线性组合的扩波方法进行模糊度变换,使原模糊度的搜索空间变小.在模糊度的新搜索空间确定后,通过线性组合的逆变换求取模糊度N1及N2,并以模糊度函数法进行真值的搜索,实现单历元解算.采用基线长度不同的两组数据测试,结果表明了本文方法的可行性和可靠性. 相似文献
10.
基于北斗三频的短基线单历元模糊度固定 总被引：2，自引：0，他引：2
采用三频观测值能组成更多波长更长、噪声较小的观测值;通过依次固定超宽巷、宽巷、窄巷模糊度,可以实现模糊度的快速固定。目前以TCAR、CIR为代表的方法均是基于无几何模型的方法,通过伪距直接求解相位模糊度;由于不同卫星模糊度各自单独求解,没有综合利用所有卫星的观测值信息。基于有几何模型,使用LAMBDA方法进行逐级模糊度固定,依次固定超宽巷、两个宽巷、两个无电离层组合窄巷模糊度,最后使用模糊度固定的两个无电离层组合进行最终基线解算。北斗实测数据验证表明,针对10km的短基线数据,采用本文方法可以实现100%的单历元模糊度固定的成功率。 相似文献
11.
Monitoring drought dynamics in the Aravalli region (India) using different indices based on ground and remote sensing data 总被引：5，自引：0，他引：5
C. Bhuiyan R.P. Singh F.N. Kogan 《International Journal of Applied Earth Observation and Geoinformation》2006,8(4):289-302
The hard-rock hilly Aravalli terrain of Rajasthan province of India suffers with frequent drought due to poor and delayed monsoon, abnormally high summer-temperature and insufficient water resources. In the present study, detailed analysis of meteorological and hydrological data of the Aravalli region has been carried out for the years 1984–2003. Standardised Precipitation Index (SPI) has been used to quantify the precipitation deficit. Standardised Water-Level Index (SWI) has been developed to assess ground-water recharge-deficit. Vegetative drought indices like Vegetation Condition Index (VCI) and Temperature Condition Index (TCI) and Vegetation Health Index (VHI) have been computed using NDVI values obtained from Global Vegetation Index (GVI) and thermal channel data of NOAA AVHRR satellite. Detailed analyses of spatial and temporal drought dynamics during monsoon and non-monsoon seasons have been carried out through drought index maps generated in Geographic Information Systems (GIS) environment. Analysis and interpretation of these maps reveal that negative SPI anomalies not always correspond to drought. In the Aravalli region, aquifer-stress shifts its position time to time, and in certain pockets it is more frequent. In comparison to hydrological stress, vegetative stress in the Aravalli region is found to be slower to begin but quicker to withdraw. 相似文献
12.
地理数据库的关系模型及其实现 总被引：1，自引：0，他引：1
本文从以图论观点分析地理实体入手,系统阐述了地理数据库关系模型的设计法和过程。作者于1984年4～9月间在微型机上设计建立了关系型地理数据库的实方验系统(RGDB)。该系统采用了本文提出的关系模型,采用了可动态扩库的子库组合结构,这种结构具有灵活性和提高空间利用率的优点。RGDB含有多种功能的数据操作命令,除了具有一般检索功能外,还能进行“开窗”选取和十分“自由”的映象选取。本文对RGDB系统的主要性能和实现途径作了扼要介绍。 相似文献
13.
随着城市面貌日新月异,地下管网的建设也在持续推进,作为城市的地下“神经网络”,全天24 h保障城市的正常运转和发展。本文以实现城市管网管理系统的高可用、无插件、智能化为目标,采用“地上地下一体”“二三维一体”的设计理念,研究基于WebGL的三维智慧管网系统的关键技术,实现了管线设施管理的信息数字化、空间化与图形化。 相似文献
14.
SVG是一种基于XML的用来描述二维矢量图形和矢量/栅格混合图形的标记语言,虽然SVG不是为了面向地理空间数据发布而制定的标准,但它的许多特性都能被广泛地应用到WebGIS中,从而实现矢量WebGIS。由于SVG通过简单的文本语句描述矢量图像,所以SVG通常数据量很小,并且SVG支持GZIP压缩,所以基于SVG构建WebGIS能减轻网络传输负载,加快地图显示速度。SVG内置了对JavaScript的支持,且SVG可通过DOM解析映像成内存中的树型结构,所以客户层可通过JavaScript对DOM的操作实现对地图的缩放、漫游、查询、图层控制等交互操作。 相似文献
15.
本文在讨论DDE技术的基础上，对MapInfo的DDE机制的实现作了探讨和分析。根据技园区域GIS的实际开发工作，介绍了利用DDE技术在MapInfo中成功地集成Foxpro和Autocad. 相似文献
16.
遥感技术在土地利用动态监测中的应用 总被引：8，自引：0，他引：8
金时华 《测绘与空间地理信息》2006,29(1):98-101
主要论述遥感技术在土地监测中的应用,以某地区土地利用动态遥感监测研究项目的运作过程为例进行阐述。首先介绍了土地利用动态监测的具体内容和技术路线。其次,对数据预处理与信息采集的方法与手段进行了探讨。最后,对作业的内、外业主要过程以及应提交的成果作了介绍。 相似文献
17.
18.
Automatic 3D extraction of building roofs from remotely sensed data is important for many applications including city modelling. This paper proposes a new method for automatic 3D roof extraction through an effective integration of LIDAR (Light Detection And Ranging) data and multispectral orthoimagery. Using the ground height from a DEM (Digital Elevation Model), the raw LIDAR points are separated into two groups. The first group contains the ground points that are exploited to constitute a ‘ground mask’. The second group contains the non-ground points which are segmented using an innovative image line guided segmentation technique to extract the roof planes. The image lines are extracted from the grey-scale version of the orthoimage and then classified into several classes such as ‘ground’, ‘tree’, ‘roof edge’ and ‘roof ridge’ using the ground mask and colour and texture information from the orthoimagery. During segmentation of the non-ground LIDAR points, the lines from the latter two classes are used as baselines to locate the nearby LIDAR points of the neighbouring planes. For each plane a robust seed region is thereby defined using the nearby non-ground LIDAR points of a baseline and this region is iteratively grown to extract the complete roof plane. Finally, a newly proposed rule-based procedure is applied to remove planes constructed on trees. Experimental results show that the proposed method can successfully remove vegetation and so offers high extraction rates. 相似文献
19.
遥感和GIS技术应用于伊拉克南部Basrah省土地利用/覆盖变化及城市扩张研究(英文) 总被引：2，自引：0，他引：2
In recent years, land use/cover dynamic change has become a key subject that needs to be dealt with in the study of global
environmental change. In this paper, remote sensing and geographic information systems (GIS) are integrated to monitor, map,
and quantify the land use/cover change in the southern part of Iraq (Basrah Province was taken as a case) by using a 1:250
000 mapping scale. Remote sensing and GIS software were used to classify Landsat TM in 1990 and Landsat ETM+ in 2003 imagery
into five land use and land cover (LULC) classes: vegetation, sand, urban area, unused land, and water bodies. Supervised
classification and normalized difference build-up index (NDBI) were used respectively to retrieve its urban boundary. An accuracy
assessment was performed on the 2003 LULC map to determine the reliability of the map. Finally, GIS software was used to quantify
and illustrate the various LULC conversions that took place over the 13-year span of time. Results showed that the urban area
had increased by the rate of 1.2% per year, with area expansion from 3 299.1 km2 in 1990 to 3 794.9 km2 in 2003. Large vegetation area in the north and southeast were converted into urban construction land. The land use/cover
changes of Basrah Province were mainly caused by rapid development of the urban economy and population immigration from the
countryside. In addition, the former government policy of “returning farmland to transportation and huge expansion in military
camps” was the major driving force for vegetation land change. The paper concludes that remote sensing and GIS can be used
to create LULC maps. It also notes that the maps generated can be used to delineate the changes that take place over time.
Supported by the Al-Basrah University, Iraq, the Geo-information Science and Technology Program (No. IRT 0438)China). 相似文献