共查询到20条相似文献，搜索用时 15 毫秒
1.
Forest cover plays a key role in climate change by influencing the carbon stocks, the hydrological cycle and the energy balance. Forest cover information can be determined from fine-resolution data, such as Landsat Enhanced Thematic Mapper Plus (ETM+). However, forest cover classification with fine-resolution data usually uses only one temporal data because successive data acquirement is difficult. It may achieve mis-classification result without involving vegetation growth information, because different vegetation types may have the similar spectral features in the fine-resolution data. To overcome these issues, a forest cover classification method using Landsat ETM+ data appending with time series Moderate-resolution Imaging Spectroradiometer (MODIS) Normalized Difference Vegetation Index (NDVI) data was proposed. The objective was to investigate the potential of temporal features extracted from coarse-resolution time series vegetation index data on improving the forest cover classification accuracy using fine-resolution remote sensing data. This method firstly fused Landsat ETM+ NDVI and MODIS NDVI data to obtain time series fine-resolution NDVI data, and then the temporal features were extracted from the fused NDVI data. Finally, temporal features combined with Landsat ETM+ spectral data was used to improve forest cover classification accuracy using supervised classifier. The study in North China region confirmed that time series NDVI features had significant effects on improving forest cover classification accuracy of fine resolution remote sensing data. The NDVI features extracted from time series fused NDVI data could improve the overall classification accuracy approximately 5% from 88.99% to 93.88% compared to only using single Landsat ETM+ data. 相似文献
2.
Rhonda D. Phillips Layne T. Watson Randolph H. Wynne Christine E. Blinn 《ISPRS Journal of Photogrammetry and Remote Sensing》2009,64(1):107-116
Feature reduction in a remote sensing dataset is often desirable to decrease the processing time required to perform a classification and improve overall classification accuracy. This paper introduces a feature reduction method based on the singular value decomposition (SVD). This SVD-based feature reduction method reduces the storage and processing requirements of the SVD by utilizing a training dataset. This feature reduction technique was applied to training data from two multitemporal datasets of Landsat TM/ETM+ imagery acquired over a forested area in Virginia, USA and Rondônia, Brazil. Subsequent parallel iterative guided spectral class rejection (pIGSCR) forest/non-forest classifications were performed to determine the quality of the feature reduction. The classifications of the Virginia data were five times faster using SVD-based feature reduction without affecting the classification accuracy. Feature reduction using the SVD was also compared to feature reduction using principal components analysis (PCA). The highest average accuracies for the Virginia dataset (88.34%) and for the Rondônia dataset (93.31%) were achieved using the SVD. The results presented here indicate that SVD-based feature reduction can produce statistically significantly better classifications than PCA. 相似文献
3.
Habes A. Ghrefat Abdullah A. Al Zahrani Mahmoud A. Galmed 《Journal of the Indian Society of Remote Sensing》2018,46(9):1399-1411
Mapping the surficial extent of oolitic iron ore deposits hosted in the Oligo–Miocene sedimentary rocks of the Ashumaysi Formation, western Saudi Arabia, was carried out using Landsat 7 Enhanced Thematic Mapper Plus (ETM+) data. Ore samples were collected from four various locations in the study area, and were studied in the laboratory using the GER 3700 Spectroradiometer (0.4–2.5 µm) and X-ray diffraction (XRD). Principal component analysis (PCA), minimum noise fraction (MNF), and minimum distance classification were used and assessed to map mineralization zones in the study area. Good correspondences were observed between the results obtained from the above mentioned techniques, spectral reflectance analyses, and XRD. The confusion matrix results revealed that mapping of iron ores using MNF is better and more accurate than using PCA. Good matching was also observed between the spectral reflectance curves of the collected samples and the corresponding pixels from Landsat 7 ETM+. The results demonstrated the usefulness of the image processing and interpretation of Landsat 7 ETM+ data for the detection and delineation iron ore deposits in arid and semi-arid areas. 相似文献
4.
Coffee is a commodity of international trade significance, and its value chain can benefit from age-specific thematic maps. This study aimed to assess the potential of Landsat 8 OLI to develop these maps. Using field-collected samples with the random forest classifier, splitting coffee into three age classes (Scheme A) was compared with running the classification with one compound coffee class (Scheme B). Higher overall classification accuracy was obtained in Scheme B (90.3% for OLI and 86.8% for ETM+) than in Scheme A (86.2% for OLI and 81.0% for ETM+). The NIR band of OLI was the most important band in intra-class discrimination of coffee. Landsat 8 OLI mapped area closely matched farm records (R2?=?0.88) compared to that of Landsat 7 ETM+ (R2?=?0.78). It was concluded that Landsat 8 OLI data can be used to produce age-specific thematic maps in coffee production areas although disaggregating coffee classes reduces overall accuracy. 相似文献
5.
Remote sensing techniques offer effective means for mapping plant communities. However, mapping grassland with fine vegetative classes over large areas has been challenging for either the coarse resolutions of remotely sensed images or the high costs of acquiring images with high-resolutions. An improved hybrid-fuzzy-classifier (HFC) derived from a semi-ellipsoid-model (SEM) is developed in this paper to achieve higher accuracy for classifying grasslands with Landsat images. The Xilin River Basin, Inner Mongolia, China, is chosen as the study area, because an acceptable volume of ground truthing data was previously collected by multiple research communities. The accuracy assessment is based on the comparison of the classification outcomes from four types of image sets: (1) Landsat ETM+ August 14, 2004, (2) Landsat TM August 12, 2009, (3) the fused images of ETM+ with CBERS, and (4) TM with CBERS, respectively, and by three classifiers, the proposed HFC-SEM, the tetragonal pyramid model (TPM) based HFC, and the support vector machine method. In all twelve classification experiments, the HFC-SEM classifier had the best overall accuracy statistics. This finding indicates that the medium resolution Landsat images can be used to map grassland vegetation with good vegetative detail when the proper classifier is applied. 相似文献
6.
The European Space Agency (ESA) is currently implementing the BIOMASS mission as 7th Earth Explorer satellite. BIOMASS will provide for the first time global forest aboveground biomass estimates based on P-band synthetic aperture radar (SAR) imagery. This paper addresses an often overlooked element of the data processing chain required to ensure reliable and accurate forest biomass estimates: accurate identification of forest areas ahead of the inversion of radar data into forest biomass estimates.The use of the P-band data from BIOMASS itself for the classification into forest and non-forest land cover types is assessed in this paper. For airborne data in tropical, hemi-boreal and boreal forests we demonstrate that classification accuracies from 90 up to 97% can be achieved using radar backscatter and phase information. However, spaceborne data will have a lower resolution and higher noise level compared to airborne data and a higher probability of mixed pixels containing multiple land cover types. Therefore, airborne data was reduced to 50 m, 100 m and 200 m resolution. The analysis revealed that about 50–60% of the area within the resolution level must be covered by forest to classify a pixel with higher probability as forest compared to non-forest. This results in forest omission and commission leading to similar forest area estimation over all resolutions. However, the forest omission resulted in a biased underestimated biomass, which was not equaled by the forest commission. The results underline the necessity of a highly accurate pre-classification of SAR data for an accurate unbiased aboveground biomass estimation. 相似文献
7.
TerraSAR-X satellite acquires very high spatial resolution data with potential for detailed land cover mapping. A known problem with synthetic aperture radar (SAR) data is the lack of spectral information. Fusion of SAR and multispectral data provides opportunities for better image interpretation and information extraction. The aim of this study was to investigate the fusion between TerraSAR-X and Landsat ETM+ for protected area mapping using high pass filtering (HPF), principal component analysis with band substitution (PCA) and principal component with wavelet transform (WPCA). A total of thirteen land cover classes were identified for classification using a non-parametric C 4.5 decision tree classifier. Overall classification accuracies of 74.99%, 83.12% and 85.38% and kappa indices of 0.7220, 0.8100 and 0.8369 were obtained for HPF, PCA and WPCA fusion approaches respectively. These results indicate a high potential for a combined use of TerraSAR-X and Landsat ETM+ data for protected area mapping in Uganda. 相似文献
8.
由于自然演替和一些干扰因素的影响,森林覆盖处在不断的变化中.结合云南省西双版纳地区的天宫一号高光谱数据以及Landsat影像,研究了热带森林覆盖制图与变化检测的自动化识别方法.首先分析了每景影像中红光波段的光谱属性,依据直方图提取出纯净森林像元,然后计算影像中各像元与纯净森林像元之间的光谱相似性,从而得到森林指数并以此为依据提取出每景影像对应的森林覆盖图,将多期的森林覆盖专题图进行叠加分析即可得到森林变化专题图.结果表明:(1)使用天宫一号高光谱影像可以进行森林覆盖自动化提取,生成的森林覆盖图合理地反映了森林分布状况;(2)与多期遥感影像结合进行森林变化信息提取,提取结果很好地体现了森林减少和森林恢复情况,对新恢复的未郁闭森林也可以进行有效检测. 相似文献
9.
This study assesses the usefulness of Nigeriasat-1 satellite data for urban land cover analysis by comparing it with Landsat and SPOT data. The data-sets for Abuja were classified with pixel- and object-based methods. While the pixel-based method was classified with the spectral properties of the images, the object-based approach included an extra layer of land use cadastre data. The classification accuracy results for OBIA show that Landsat 7 ETM, Nigeriasat-1 SLIM and SPOT 5 HRG had overall accuracies of 92, 89 and 96%, respectively, while the classification accuracy for pixel-based classification were 88% for Landsat 7 ETM, 63% for Nigeriasat-1 SLIM and 89% for SPOT 5 HRG. The results indicate that given the right classification tools, the analysis of Nigeriasat-1 data can be compared with Landsat and SPOT data which are widely used for urban land use and land cover analysis. 相似文献
10.
Biodiversity mapping in extensive tropical forest areas poses a major challenge for the interpretation of Landsat images, because floristically clearly distinct forest types may show little difference in reflectance. In such cases, the effects of the bidirectional reflection distribution function (BRDF) can be sufficiently strong to cause erroneous image interpretation and classification. Since the opening of the Landsat archive in 2008, several BRDF normalization methods for Landsat have been developed. The simplest of these consist of an empirical view angle normalization, whereas more complex approaches apply the semi-empirical Ross–Li BRDF model and the MODIS MCD43-series of products to normalize directional Landsat reflectance to standard view and solar angles. Here we quantify the effect of surface anisotropy on Landsat TM/ETM+ images over old-growth Amazonian forests, and evaluate five angular normalization approaches. Even for the narrow swath of the Landsat sensors, we observed directional effects in all spectral bands. Those normalization methods that are based on removing the surface reflectance gradient as observed in each image were adequate to normalize TM/ETM+ imagery to nadir viewing, but were less suitable for multitemporal analysis when the solar vector varied strongly among images. Approaches based on the MODIS BRDF model parameters successfully reduced directional effects in the visible bands, but removed only half of the systematic errors in the infrared bands. The best results were obtained when the semi-empirical BRDF model was calibrated using pairs of Landsat observation. This method produces a single set of BRDF parameters, which can then be used to operationally normalize Landsat TM/ETM+ imagery over Amazonian forests to nadir viewing and a standard solar configuration. 相似文献
11.
The use of remote sensing data with other ancillary data in a geographic information system (GIS) environment is useful to delineate groundwater potential zonation map of Ken–Betwa river linking area of Bundelkhand. Various themes of information such as geomorphology, land use/land cover, lineament extracted from digital processing of Landsat (ETM+) satellite data of the year 2005 and drainage map were extracted from survey of India topographic sheets, and elevation, slope data were generated from shuttle radar topography mission (SRTM) digital elevation model (DEM). These themes were overlaid to generate groundwater potential zonation (GWPZ) map of the area. The final map of the area shows different zones of groundwater prospects, viz., good (5.22% of the area), moderate (65.83% of the area) poor (15.31% of the area) and very poor (13.64% of area). 相似文献
12.
为研究我国首颗携带红边波段的高分六影像（GF-6）在林地与非林地上的识别贡献，本文选择复杂林地类型的安徽省黄山市作为研究区，采用特征优选（RFE）与随机森林（RF）相结合的方法开展了林地与非林地识别潜力研究。首先根据实地调查、Google Earth影像及林地"一张图"样本数据构建了样本库；然后基于DEM、多时相光谱特征、植被指数、红边指数等特征开展分类，并比较不同模型精度及不同变量的重要度。结果表明：GF-6红边信息对林地非林地识别较为重要，引入红边信息可将总体分类精度提升2%，其他新增波段及地形特征对林地与非林地识别贡献并不明显；多时相数据的运用相比单时相数据可整体提高林地类型的分类精度2.93%~4.1%，单时相分类结果6月最好，9月次之，12月最差；特征优选可以有效减少数据输入维数（46到15），并取得最高分类精度，在不牺牲精度的同时保证了运算数据量的减少且明确了不同变量的贡献，具有较强的应用意义。 相似文献
13.
Spectral analysis technique has been utilized to identify the Bauxite mineral occurrences in Panchpatmali, Orissa, India. Spectral processing of Landsat ETM+ data has been carried out by converting the digital data from quantized and calibrated values to reflectance values. Minimum noise fraction transformation is used to determine the inherent dimensionality of reflected Landsat ETM+ data, to segregate noise in the data, and to reduce the computational requirements for subsequent processing and interactively to locate pure pixels within the data-set, projecting n-dimensional scatterplots. Spectral processing results are displayed in the form of images corresponding to each group of pixels (endmembers). Mixed tune matched filtering method has been applied on Landsat ETM+ images which gave three score (abundance) images for three different classes (endmembers) such as Bauxite, vegetation and soil. Further, mineralized zones are identified using image fusion of ERS-2 SAR and Landsat ETM+ data using intensity-hue-saturation technique. 相似文献
14.
《地理信息系统科学与遥感》2013,50(2):212-231
A fine-resolution leaf area index (LAI) data set over a 150 km × 150 km region in central Kazakhstan is retrieved using Landsat ETM+ imagery and ground-based LAI inferred from hemispherical photography and direct measurements. Regression analysis and geostatistics are applied for developing empirical models of LAI from Landsat ETM+ data. The best accuracy is achieved using a model employing a canonical index that combines all the contributions of individual Landsat ETM+ bands into a single index (R 2 = 0.67; RMSE = 0.21). This model is then applied for mapping LAI at a regional scale. 相似文献
15.
J. Norton N. Glenn M. Germino K. Weber S. Seefeldt 《International Journal of Applied Earth Observation and Geoinformation》2009,11(5):360-367
Remote sensing indices of burn area and fire severity have been developed and tested for forest ecosystems, but not sparsely vegetated, desert shrub-steppe in which large wildfires are a common occurrence and a major issue for land management. We compared the performance of remote sensing indices for detecting burn area and fire severity with extensive ground-based cover assessments made before and after the prescribed burning of a 3 km2 shrub-steppe area. The remote sensing indices were based on either Landsat 7 ETM+ or SPOT 5 data, using either single or multiple dates of imagery. The indices delineating burned versus unburned areas had better overall, User, and Producer's accuracies than indices delineating levels of fire severity. The Soil Adjusted Vegetation Index (SAVI) calculated from SPOT had the greatest overall accuracy (100%) in delineating burned versus unburned areas. The relative differenced Normalized Burn Ratio (RdNBR) using Landsat ETM+ provided the highest accuracies (73% overall accuracy) for delineating fire severity. Though SPOT's spatial resolution likely conferred advantages for determining burn boundaries, the higher spectral resolution (particularly band 7, 2.21 μm) of Landsat ETM+ may be necessary for detecting differences in fire severity in sparsely vegetated shrub-steppe. 相似文献
16.
Measuring and progressing toward international goals of curbing deforestation and improving livelihoods of people who depend on forests requires nuanced understanding of forests and the processes surrounding deforestation and degradation. Despite rapid improvements in Earth Observation technology, monitoring of tropical forests remains hindered by persistent cloud cover, heterogeneous landscapes, long wet seasons, and small and ephemeral clearings masked by rapid growth. A hybrid method is presented that combines elements of both time-series and compositing approaches to best overcome these obstacles to map forest cover and change in the Republic of Panama based on Landsat imagery. The resulting Panama Vegetation-Cover Time-Series (PVCTS) maps depict forest cover in Panama from 1990 to 2016 at 30 m resolution. Acknowledging the fuzzy boundary between forest and non-forest classes, these maps employ a hierarchical classification scheme that reflects the natural process of regeneration and can accommodate different definitions of forest and deforestation. Classification accuracy is 97–98 % between forest/non-forest categories and 76–81 % for deforestation events. The maps show a slight greening of Panama from 1990 to 2016 caused by expansion of young secondary growth. The annual rate of deforestation in mature forest has remained around -0.6 %/yr, although young forests have matured at a similar rate such that there is no net loss of forest. While estimates of total forest cover are similar to official national estimates depending on forest definition, there is little agreement in location of deforestation events. 相似文献
17.
基于ETM＋制作土地利用覆盖图——以制作北京1：5万土地利用覆盖图为例 总被引：3，自引：1，他引：2
简要介绍了基于LANDSAT7 ETM＋影像,采用计算机非监督分类、监督分类与人工解译相结合的方法制作土地利用覆盖图的过程和所采用的关键技术,给出了适用于规模化生产土地利用覆盖数据的工艺流程图。使用该方法制作的十一种分类要素的北京地区1：5万土地利用覆盖图,平均分类精度为84．85％,可以满足一般用户对土地利用覆盖图的要求。 相似文献
18.
19.
地形校正可以减小地形起伏对地物光谱的影响,提高计算机分类在山区的精度。设计了针对全球土地覆盖分类的Landsat TM/ETM+数据地形校正方法 SCOS(Smoothed COS余弦),首先对地形的坡度角进行抹平处理,很大程度上削弱了地表非朗伯性对地形校正的影响,然后利用简单有效的余弦校正去除地形效应。该方法与其他常用地形校正算法的对比分析是通过对全球不同区域、不同地表覆盖的有代表性的6景Landsat TM/ETM+数据的试验,采用统计分析与目视判读的方式,从过度校正和类内均一性两个方面进行的。结果表明,该方法在目视效果和统计结果上优于常规方法,并且更加简单有效,无需复杂的大气参数及传感器参数,满足全球地表覆盖分类对地形校正的需求。 相似文献
20.
全球地表覆盖遥感制图与关键技术研究项目要求对两个基准年度(2000年、2010年)全球30 m分辨率的多光谱遥感数据进行辐射处理和几何精纠正处理,为地表覆盖制图完成数据准备。数据以Landsat TM/ETM+为主,HJ-1A/B CCD数据为补充,共计2万多景影像需要进行辐射处理,有1000多景HJ-1A/B CCD影像需要几何精纠正。如此大规模的数据处理,自动化处理是必然的选择。本文介绍了HJ-1A/B CCD图像几何精纠正自动化实现中关键问题的解决方法和精度评价结果,Landsat TM/ETM+和HJ-1A/B CCD图像自动化辐射校正中关键问题的解决方法和精度评价结果,以及大规模的数据处理活动引发的一些思考。 相似文献