首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 226 毫秒
1.
Summary The probability to find an error vector in multiples of the Helmert-Maxwell-Boltzmann point error σ2 δij(δij Kronecker symbol) is calculated. It is found that the probability is for σ39%, for2 σ86% and for3 σ99% in two dimensions, for σ20%, for2 σ74% and for3 σ97% in three dimensions. The fundamental Maxwell-Boltzmann-distribution is tabulated0,02 (0,02) 4,50.   相似文献   

2.
    
From periodic variations of the orbital inclinations of three artificial satellites 1959Alpha 1, 1960Iota 2, and 1962Beta Mu 1 Love’s number of the earth and time lag of the bodily tide due to the friction are determined, respectively,0.29±0.03 and(10±5) minutes in time. While the previous paper on the determination of Love’s number of the earth (Kozai, 1967) was in press, a minor error was discovered in the Differential Orbit Improvement program(DOI) of the Smithsonian Astrophysical Observatory(SAO). Since the analysis was based on time-variations of the orbital inclinations which were derived by theDOI from precisely reduced Baker-Nunn observations, it is likely that the results in the previous paper was affected by the error in theDOI. Therefore, the analysis is iterated by using the revisedDOI. Three satellites, 1959Alpha 1 (Vanguard 2), 1960Iota 2 (rocket ofEcho 1), and 1962Beta Mu 1 (Anna) (see Table 1) are adopted for determining Love’s number in the present paper. The satellite, 1959Eta, which was used in the previous paper, is not adopted here, since the inclination of this satellite shows irregular variations unexplained. Instead of 1959Eta 1962Beta Mu 1 is adopted as orbital elements from precisely reduced Baker-Nunn observations have become available for a long interval of time for this satellite.  相似文献   

3.
Summary Within potential theory of Poisson-Laplace equation the boundary value problem of physical geodesy is classified asfree andnonlinear. For solving this typical nonlinear boundary value problem four different types of nonlinear integral equations corresponding to singular density distributions within single and double layer are presented. The characteristic problem of free boundaries, theproblem of free surface integrals, is exactly solved bymetric continuation. Even in thelinear approximation of fundamental relations of physical geodesy the basic integral equations becomenonlinear because of the special features of free surface integrals.  相似文献   

4.
A set of2261 5°×5° mean anomalies were used alone and with satellite determined harmonic coefficients of the Smithsonian' Institution to determine the geopotential expansion to various degrees. The basic adjustment was carried out by comparing a terrestrial anomaly to an anomaly determined from an assumed set of coefficients. The (14, 14) solution was found to agree within ±3 m of a detailed geoid in the United States computed using1°×1° anomalies for an inner area and satellite determined anomalies in an outer area. Additional comparisons were made to the input anomaly field to consider the accuracy of various harmonic coefficient solutions. A by-product of this investigation was a new γE=978.0463 gals in the Potsdam system or978.0326 gals in an absolute system if −13.7 mgals is taken as the Potsdam correction. Combining this value of γE withf=1/298.25, KM=3.9860122·10 22 cm 3 /sec 2 , the consistent equatorial radius was found to be6378143 m.  相似文献   

5.
The multivariate total least-squares (MTLS) approach aims at estimating a matrix of parameters, Ξ, from a linear model (Y−E Y = (X−E X ) · Ξ) that includes an observation matrix, Y, another observation matrix, X, and matrices of randomly distributed errors, E Y and E X . Two special cases of the MTLS approach include the standard multivariate least-squares approach where only the observation matrix, Y, is perturbed by random errors and, on the other hand, the data least-squares approach where only the coefficient matrix X is affected by random errors. In a previous contribution, the authors derived an iterative algorithm to solve the MTLS problem by using the nonlinear Euler–Lagrange conditions. In this contribution, new lemmas are developed to analyze the iterative algorithm, modify it, and compare it with a new ‘closed form’ solution that is based on the singular-value decomposition. For an application, the total least-squares approach is used to estimate the affine transformation parameters that convert cadastral data from the old to the new Israeli datum. Technical aspects of this approach, such as scaling the data and fixing the columns in the coefficient matrix are investigated. This case study illuminates the issue of “symmetry” in the treatment of two sets of coordinates for identical point fields, a topic that had already been emphasized by Teunissen (1989, Festschrift to Torben Krarup, Geodetic Institute Bull no. 58, Copenhagen, Denmark, pp 335–342). The differences between the standard least-squares and the TLS approach are analyzed in terms of the estimated variance component and a first-order approximation of the dispersion matrix of the estimated parameters.  相似文献   

6.
Summary The system of normal equations for the adjustment of a free network is a singular one. Therefore, a number of coordinates has to be fixed according to the matrix. The mean square errors and the error ellipses of such an adjustment are dependent on this choice. This paper gives a simple, direct method for the adjustment of free networks, where no coordinates need to be fixed. This is done by minimizing not only the sum of the squares of the weighted errorsV T PV=minimun but also the Euclidean norm of the vectorX and of the covariance matrixQ X T X=minimum trace (Q)=minimum This last condition is crucial for geodetic problems of this type.  相似文献   

7.
《测量评论》2013,45(83):224-230
Abstract

Mr. A. J. Morley has contributed a series of articles in the Review (E.S.R., iv, 23, 16; iv, 25, 136 and vi, 40, 76) on the adjustment of trigonometrical levels and the evaluation of the coefficient of terrestrial refraction with a view to ascertaining how other Colonies and Dominions deal with these problems. This object is very commendable as several problems concerning both the observational and theoretical sides arise in height determinations, regarding which there is not much guidance in the usual treatises on the subject.  相似文献   

8.
The development of lasers, new electro-optic light modulation methods, and improved electronic techniques have made possible significant improvements in the range and accuracy of optical distance measurements, thus providing not only improved geodetic tools but also useful techniques for the study of other geophysical, meteorological, and astronomical problems. One of the main limitations, at present, to the accuracy of geodetic measurements is the uncertainty in the average propagation velocity of the radiation due to inhomogeneity of the atmosphere. Accuracies of a few parts in ten million or even better now appear feasible, however, through the use of the dispersion method, in which simultaneous measurements of optical path length at two widely separated wavelengths are used to determine the average refractive index over the path and hence the true geodetic distance. The design of a new instrument based on this method, which utilizes wavelengths of6328 ? and3681 ? and3 GHz polarization modulation of the light, is summarized. Preliminary measurements over a5.3 km path with this instrument have demonstrated a sensitivity of3×10 −9 in detecting changes in optical path length for either wavelength using1-second averaging, and a standard deviation of3×10 −7 in corrected length. The principal remaining sources of error are summarized, as is progress in other laboratories using the dispersion method or other approaches to the problem of refractivity correction.  相似文献   

9.
An investigation was made of the behaviour of the variable (where ρij are the discrepancies between the direct and reverse measurements of the height of consecutive bench marks and theR ij are their distance apart) in a partial net of the Italian high precision levelling of a total length of about1.400 km. The methods of analysis employed were in general non-parametric individual and cumulative tests; in particular randomness, normality and asymmetry tests were carried out. The computers employed wereIBM/7094/7040. From the results evidence was obtained of the existence of an asymmetry in respect to zero of thex ij confirming the well-known results given firstly by Lallemand. A new result was obtained from the tests of randomness which put in evidence trends of the mean values of thex ij and explained some anomalous behaviours of the cumulative discrepancy curves. The extension of this investigation to a broader net possibly covering other national nets would be very useful to get a deeper insight into the behaviour of the errors in high precision levelling. Ad hoc programs for electronic computers are available to accomplish this job quickly. Presented at the 14th International Assembly of Geodesy (Lucerne, 1967).  相似文献   

10.
A method for filtering of geodetic observationwhich leaves the final result normally distributed, is presented. Furthermore, it is shown that if you sacrifice100.a% of all the observations you may be (1−β).100% sure that a gross error of the size Δ is rejected. Another and, may be intuitively, more appealing method is presented; the two methods are compared and it is shown why Method 1 should be preferred to Method 2 for geodetic purposes. Finally the two methods are demonstrated in some numerical examples.  相似文献   

11.
《测量评论》2013,45(100):265-269
Abstract

In the E.S.R. January and April numbers of 1955, Vol. xiii, Nos. 95 and 96, Mr. Hsuan-Loh Su described the “Adjustment of a Level Net by Successive Approximations and by Electrical Analogy”. It does not seem to be as generally known as it should be that the rigid least square solution can be greatly simplified by utilizing the electrical analogy and solving by Kirchhoff's method. The method as detailed below has been in use for over 40 years.  相似文献   

12.
《测量评论》2013,45(47):30-35
Abstract

In the Empire Survey Review for October 1938 (iv, 30, 480) a simple demonstration of the condition to be satisfied for conformal representation was given. This condition may be expressed by the equation w = f(z), where w and z are complex variables representing corresponding points in the w-plane and z-plane respectively, and f(z) is an analytic function of z.  相似文献   

13.
《测量评论》2013,45(84):274-277
Abstract

Mr. Rainsford's paper in E.S.R. No. 78 establishes as thoroughly as one can wish by computational example that there is little to choose in relative accuracy between direction adjustment and angle adjustment, and that the deciding factor is really ease and speed of computation.  相似文献   

14.
Abstract

The proof of the attraction of a uniformly thin vertical block in the last issue (No. 24, p. 87) does not appear as satisfactory as the textbook would suggest. It is proposed to attempt here a more direct explanation, independent of substitutional expedients.  相似文献   

15.
In the field of biomass estimation, terrain radiometric calibration of airborne polarimetric SAR data for forested areas is an urgent problem. Illuminated area correction of σ -naught could not completely remove terrain features. Inspired by Small and Shimada, this paper tested gamma-naught on one mountainous forested area using airborne Uninhabited Aerial Vehicle Synthetic Aperture Radar data and found it could remove most terrain features. However, a systematic increasing trend from far range to near range is found in airborne SAR cases. This paper made an attempt to use the relationship between distance to SAR sensor and γ-naught to calibrate γ -naught. Two quantitative evaluation methods are proposed. Experimental results demonstrate that variation of γ -naught can be constrained to a limited extent from near range to far range. Since this method is based on ground range images, it avoids complicated orthorectification.  相似文献   

16.
In order to achieve to GPS solutions of first-order accuracy and integrity, carrier phase observations as well as pseudorange observations have to be adjusted with respect to a linear/linearized model. Here the problem of mixed integer-real valued parameter adjustment (IRA) is met. Indeed, integer cycle ambiguity unknowns have to be estimated and tested. At first we review the three concepts to deal with IRA: (i) DDD or triple difference observations are produced by a properly chosen difference operator and choice of basis, namely being free of integer-valued unknowns (ii) The real-valued unknown parameters are eliminated by a Gauss elimination step while the remaining integer-valued unknown parameters (initial cycle ambiguities) are determined by Quadratic Programming and (iii) a RA substitute model is firstly implemented (real-valued estimates of initial cycle ambiguities) and secondly a minimum distance map is designed which operates on the real-valued approximation of integers with respect to the integer data in a lattice. This is the place where the integer Gram-Schmidt orthogonalization by means of the LLL algorithm (modified LLL algorithm) is applied being illustrated by four examples. In particular, we prove that in general it is impossible to transform an oblique base of a lattice to an orthogonal base by Gram-Schmidt orthogonalization where its matrix enties are integer. The volume preserving Gram-Schmidt orthogonalization operator constraint to integer entries produces “almost orthogonal” bases which, in turn, can be used to produce the integer-valued unknown parameters (initial cycle ambiguities) from the LLL algorithm (modified LLL algorithm). Systematic errors generated by “almost orthogonal” lattice bases are quantified by A. K. Lenstra et al. (1982) as well as M. Pohst (1987). The solution point of Integer Least Squares generated by the LLL algorithm is = (L')−1[L'◯] ∈ ℤ m where L is the lower triangular Gram-Schmidt matrix rounded to nearest integers, [L], and = [L'◯] are the nearest integers of L'◯, ◯ being the real valued approximation of z ∈ ℤ m , the m-dimensional lattice space Λ. Indeed due to “almost orthogonality” of the integer Gram-Schmidt procedure, the solution point is only suboptimal, only close to “least squares.” ? 2000 John Wiley & Sons, Inc.  相似文献   

17.
In satellite data analysis, one big advantage of analytical orbit integration, which cannot be overestimated, is missed in the numerical integration approach: spectral analysis or the lumped coefficient concept may be used not only to design efficient algorithms but overall for much better insight into the force-field determination problem. The lumped coefficient concept, considered from a practical point of view, consists of the separation of the observation equation matrix A=BT into the product of two matrices. The matrix T is a very sparse matrix separating into small block-diagonal matrices connecting the harmonic coefficients with the lumped coefficients. The lumped coefficients are nothing other than the amplitudes of trigonometric functions depending on three angular orbital variables; therefore, the matrix N=B T B will become for a sufficient length of a data set a diagonal dominant matrix, in the case of an unlimited data string length a strictly diagonal one. Using an analytical solution of high order, the non-linear observation equations for low–low SST range data can be transformed into a form to allow the application of the lumped concept. They are presented here for a second-order solution together with an outline of how to proceed with data analysis in the spectral domain in such a case. The dynamic model presented here provides not only a practical algorithm for the parameter determination but also a simple method for an investigation of some fundamental questions, such as the determination of the range of the subset of geopotential coefficients which can be properly determined by means of SST techniques or the definition of an optimal orbital configuration for particular SST missions. Numerical results have already been obtained and will be published elsewhere. Received: 15 January 1999 / Accepted: 30 November 1999  相似文献   

18.
《测量评论》2013,45(54):311-314
Abstract

There has always been a marked difference of opinion on the relative merits of the methods of bearings and of angles as applied to triangulation, though it is probable that the majority of writers prefer the method of bearings for first-order work. The subject was mentioned in a recent issue of this Review (vii, 47, 19).  相似文献   

19.
A relativistic delay model for Earth-based very long baseline interferometry (VLBI) observation of sources at finite distances is derived. The model directly provides the VLBI delay in the scale of terrestrial time. The effect of the curved wave front is represented by using a pseudo source vector K = (R 1 + R 2)/(R 1 + R 2), and the variation of the baseline vector due to the difference of arrival time is taken into account up to the second-order by using Halley’s method. The precision of the new VLBI delay model is 1 ps for all radio sources above 100 km altitude from the Earth’s surface in Earth-based VLBI observation. Simple correction terms (parallax effect) are obtained, which can also adopt the consensus model (e.g. International Earth Rotation and Reference Frames Service conventions) to finite-distance radio source at R > 10 pc with the same precision. The new model may enable estimation of distance to the radio source directly with VLBI delay data.  相似文献   

20.
《测量评论》2013,45(23):53-54
Abstract

The problem of the influence of the paper itself on bearings taken off maps or plans has been recently discussed by G. T. M. in this Review (iii, 22, 479). The following alternative method of solving the problem may be of interest; the same figure and symbols are used as in the article mentioned.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号