共查询到20条相似文献，搜索用时 109 毫秒
1.
亚热带森林参数的机载激光雷达估测 总被引：5，自引：2，他引：3
通过应用机载激光雷达数据,在分析云南省中部的78块样地的基础上提出2个预测森林不同生物特性的统计模型(加权平均高度的预测模型和生物量的预测模型),并讨论了预测结果及其精确性。从激光雷达数据中提取了2组变量(树冠高度变量组和植被密度变量组)作为自变量,采用逐步回归方法进行自变量选择。结果表明,激光雷达数据与森林的平均树高和地上各部分生物量有很强的相关性。对于3种不同森林类型(针叶林,阔叶林和混交林),平均树高估测均能达到比较高的精度;生物量的估测结果是针叶林优于阔叶林,混交林的生物量与激光雷达数据则没有明显相关性。最后,对回归分析的结果和影响预测精度的因素进行讨论,认为预测结果的精度可能与森林类型、激光雷达采样时间和采样密度以及坐标误差等因素有关。 相似文献
2.
数字高程模型(DEM)利用有限的地形高程数据实现对地表形态的数字化模拟,是测绘部门数据生产的重要内容.当前DEM生产主要采用交互式数字摄影测量方式,不仅需要投入大量人力,极为依赖经验,同时生产效率也较为低下.近年来兴起的机载激光雷达(LiDAR)技术为DEM获取提供了一种新的途径.本文以广西植被茂密区和陡石山区的点云数据为例,研究在广西困难地区应用机载LiDAR技术进行高精度DEM生产的可行性,并利用同区域的数字广西地貌成果对所生产的DEM进行精度验证.结果表明,应用机载LiDAR数据进行DEM生产不仅将植被茂密区的生产效率提升了25％,陡石山区的生产效率提升了7倍以上,同时数据精度能够满足1:10000 DEM的要求,在广西传统DEM生产困难地区具有极大的优势. 相似文献
3.
为进一步提升复杂地形条件下无人机激光雷达(Light Detection and Ranging,LiDAR)点云数据构建数字高程模型的效率与精度,以2022年北京冬奥会延庆赛区场馆建设用地为实验区,按照不同抽稀比例,对实验区原始无人机激光雷达点云中分类出的地面点数据进行抽稀处理,利用克里金插值算法对不同密度地面点数据进行插值处理,结合高程中误差、平均绝对误差对生成的数字高程模型进行双重精度评定,得出以下结论:对于复杂地形而言,随着点云数据密度的下降,数字高程模型建模效率明显提升,但地形特征逐渐模糊,数据精度级别逐级降低,其中高程中误差由0.381 m增大至1.914 m,平均绝对误差值由0.335 m增大至1.357 m.在满足精度要求的前提下,对LiDAR点云数据进行适度抽稀处理,可保障生产成本与时效. 相似文献
4.
为了进行平地区域原基础测绘产品高程的更新,我省进行了针对平地区域的机载LiDAR测高项目,为了获取高精度的DSM和DEM成果,在实际生产中开展了机载LiDAR数据处理及DEM成果的制作方法研究。本文将利用TerraSolid软件,从LiDAR点云数据的高程精度控制、点云滤波分类要求和如何利用特征线进行无点云数据区域的DEM精度控制等关键技术方面进行研究。 相似文献
5.
点云滤波分类是LiDAR后续应用的基础工作,在点云滤波的基础上,以航空影像为辅助条件,结合点云高程信息,设计一套地物点云的分类方法。该方法首先融合航空影像与LiDAR数据,将对应RGB值赋予每个点,根据植被的光谱特征提取出部分植被点云;然后再根据文中定义的点云高程纹理,在剩余地物点云中提取出建筑物点,最后根据回波次数信息分离出剩余植被点,完成地物点云的分类。采用北京凤凰岭地区一组机载LiDAR数据进行实验。实验结果表明,该方法能够有效地将地物点云进行分类并且满足一定的精度要求,具有一定的实用价值。 相似文献
6.
为解决抽水蓄能电站大高差、植被覆盖区域传统测量技术测量困难以及航摄测量精度低等问题,将飞马多旋翼无人机D2000与小型机载激光雷达D-LiDAR2000引入抽水蓄能电站测量中。本文以贵州省某抽水蓄能电站可研设计阶段测量为例,应用小型机载激光雷达D-LiDAR2000获取测区原始三维点云数据,并基于后处理DGNSS+INS紧组合解算的POS对原始点云进行了融合。经过植被透过性分析、航带误差分析、平面和高程精度检查,结果表明基于DGNSS+INS紧组合POS融合的小型机载激光雷达D-LiDAR2000的点云数据能够满足抽水蓄能电站数字高程模型、大比例尺地形图等产品的生产需求。 相似文献
7.
在基于激光点云构建DEM的过程中,用于区分地面点和非地面点的点云滤波处理至关重要。本文面向基于机载LiDAR点云的沿海滩涂DEM高精度的构建需求,提出了一种机载LiDAR点云的改进坡度滤波算法。首先,采用统计异常值剔除法(SOR)去除原始机载LiDAR点云数据中的噪声;然后,利用规则格网的坡度和高程阈值,设计了适用于滩涂点云数据的地面点坡度滤波方法;最后,选取如东市长沙港的滩涂机载LiDAR点云作为试验数据,构建滩涂DEM,并进行精度检验。试验结果表明,利用本文方法处理后的LiDAR点云构建的DEM精度满足国家与行业标准的要求。 相似文献
8.
机载LiDAR技术是点云数据获取的主要技术手段,在飞行作业中受气象条件、飞机姿态、IMU累计误差、基站不均匀等客观因素的影响,会出现航带间点云高程差超限的问题。本文提出一种对航带间点云高程差超限的校正方法,对相邻航带进行整体平差,能有效消除或减小相邻航带重叠区域的高程差异。选择通辽摄区为试验区,对试验区点云数据高程差超限部分进行校正处理,并通过大量外业检查点对点云精度进行检测,最终验证了这一方法的可行性,可在其他项目中推广应用。 相似文献
9.
针对电力巡线机载激光雷达（LiDAR）激光点云电塔自动提取问题，提出了一种电塔自动定位和点云提取算法。首先，基于点云进行二维空间网格划分，利用网格点云高程偏差和方差特征提取潜在电塔网格；其次，基于电塔点云的高程连续特性完成电塔自动定位和点云粗提取；然后，利用点云分层密度信息和图像开运算，实现电塔精细提取；最后，利用轻小型无人机载激光雷达数据验证本文算法的有效性。试验结果表明，本文所提出的自动提取算法，能够有效解决LiDAR数据中电塔自动定位和点云提取问题，在LiDAR数据质量较差时仍能够取得良好效果，算法对于噪点数据具有较强的稳健性。本文所提出的电塔自动提取算法在LiDAR电力巡检数据处理中具有一定的应用价值。 相似文献
10.
机载激光雷达技术(LiDAR)作为一项先进的遥感技术,是植被覆盖区DEM获取的重要手段之一,而不同地形坡度条件及点云密度对DEM产品质量有重要影响。本文以辽宁省某市的机载LiDAR数据为基础,选取5种不同地形坡度的点云数据,通过随机、等间距及基于曲率3种不同的点云抽稀方法,按照点云保留率为80%、60%、40%、20%和10%共5个不同梯度的抽稀倍数对原始点云进行抽稀简化处理,生成与之对应的DEM并对其进行精度评价,以此研究地形坡度、点云抽稀方法、抽稀倍数对DEM精度的影响。结果表明,DEM精度与地形坡度呈负相关关系,即RMSE随地形坡度升高不断增加;基于曲率的抽稀方法在地形坡度＞30°时,相较于其他两种方法RMSE较小,具有明显优势;40%的点云保留率是平衡DEM精度与数据存储效率的一个节点,当点云保留率<40%时,DEM的高程RMSE会迅速增大。该研究对于利用机载LiDAR进行大范围DEM生产具有一定的指导和借鉴意义。 相似文献
11.
Forest structural diversity metrics describing diversity in tree size and crown shape within forest stands can be used as indicators of biodiversity. These diversity metrics can be generated using airborne laser scanning (LiDAR) data to provide a rapid and cost effective alternative to ground-based inspection. Measures of tree height derived from LiDAR can be significantly affected by the canopy conditions at the time of data collection, in particular whether the canopy is under leaf-on or leaf-off conditions, but there have been no studies of the effects on structural diversity metrics. The aim of this research is to assess whether leaf-on/leaf-off changes in canopy conditions during LiDAR data collection affect the accuracy of calculated forest structural diversity metrics. We undertook a quantitative analysis of LiDAR ground detection and return height, and return height diversity from two airborne laser scanning surveys collected under leaf-on and leaf-off conditions to assess initial dataset differences. LiDAR data were then regressed against field-derived tree size diversity measurements using diversity metrics from each LiDAR dataset in isolation and, where appropriate, a mixture of the two. Models utilising leaf-off LiDAR diversity variables described DBH diversity, crown length diversity and crown width diversity more successfully than leaf-on (leaf-on models resulted in R² values of 0.66, 0.38 and 0.16, respectively, and leaf-off models 0.67, 0.37 and 0.23, respectively). When LiDAR datasets were combined into one model to describe tree height diversity and DBH diversity the models described 75% and 69% of the variance (R² of 0.75 for tree height diversity and 0.69 for DBH diversity). The results suggest that tree height diversity models derived from airborne LiDAR, collected (and where appropriate combined) under any seasonal conditions, can be used to differentiate between simple single and diverse multiple storey forest structure with confidence. 相似文献
12.
结合机载LiDAR数据,提出了一种改进的GLAS光斑点冠层高度地形校正模型,以校正后的GLAS光斑点作为输入样本,结合MODIS遥感影像,利用支持向量回归（SVR）的方法对研究区森林冠层高度进行分生态区估测,并利用野外调查数据和机载LiDAR冠层高度结果对估测结果进行验证。结果显示:研究区的坡度等级直接影响GLAS光斑点森林冠层高度估测精度,改进的地形校正模型可以较好的减小坡度对GLAS光斑点森林冠层高度估测的影响,模型精度RMSE稳定在3.25~3.48 m;不同生态分区的SVR模型估测精度较为稳定,其RMSE=6.41~7.56 m;与算数平均高相比,样地的Lorey's高与制图结果拟合最好,不同生态分区平均估测精度为80.3%。机载LiDAR冠层高度结果的验证平均精度为79.5%,和Lorey's高验证结果呈现较好的一致性。 相似文献
13.
森林植被碳储量的空间分布格局及其动态变化是陆地生态系统碳收支核算的基础。作为森林地上生物量的重要指示因子,森林高度的精确估算是提高森林植被碳储量估算精度的关键。现有研究已证明,由专业星载摄影测量系统获取的立体观测数据可用于森林高度提取,但光学遥感数据最大的问题是受云雨等天气因素的影响严重。区域森林地上生物量产品的生产需要充分挖掘潜在数据源。国产高分二号卫星(GF-2)虽然不是为获取立体观测数据而设计的专业星载摄影测量系统,但其获取的图像空间分辨率可达0.8 m,且具备±35°的的侧摆能力,在重复观测区域可构成异轨立体观测。本文以分别获取于2015年6月20日和2016年7月19的GF-2数据作为立体像对,其标称轨道侧摆角分别为0.00118°和20.4984°,以激光雷达数据获取的林下地形(DEM)和森林高度(CHM)为参考,对利用GF-2立体观测数据进行森林高度提取进行了研究。通过对立体处理得到的摄影测量点云的栅格化得到DSM,以激光雷达数据提供的DEM作为林下地形,得到了GF-2的CHM。结果表明GF-2提取的CHM与激光雷达CHM空间分布格局较为一致,两者之间存在明显的相关性,像素对像素的线性相关性(R2)达到0.51,均方根误差(RMSE)为3.6 m。研究结果表明,在林下地形已知的情况下,GF-2立体观测数据可用于森林高度估算。 相似文献
14.
估算森林地上生物量(AGB)对于全球实现碳中和目标至关重要。本文以美国缅因州Howland森林为研究区域,借助地面实测样地数据,对比分析协同不同数据源(高光谱和LiDAR)和机器学习算法(随机森林、支持向量机、梯度提升决策树和K最邻近回归)的研究,以改善Howland森林的生物量估计精度。结果表明,采用LiDAR和高光谱植被指数变量模型的最佳精度分别为0.874和0.868,协同高光谱和LiDAR变量并采用梯度提升决策树回归模型的精度为0.927,即多源遥感数据要优于单一数据源。高光谱和LiDAR数据的协同使用对于提高类似于Howland地区或更广泛区域的生物量估计的准确性,具有普遍的适用性与一定的应用前景。 相似文献
15.
基于遥感的区域尺度森林地上生物量估算研究 总被引：1，自引：0，他引：1
森林是陆地生态系统最大的碳库,精确估算森林生物量是陆地碳循环研究的关键。首先从机载LiDAR数据中提取高度和密度统计量,采用逐步回归模型进行典型样区生物量估算;然后利用机载LiDAR数据估算的生物量作为样本数据,与多光谱遥感数据Landsat8 OLI的波段反射率及植被指数建立回归模型,实现区域尺度森林地上生物量估算。实验结果显示,机载LiDAR数据估算的鼎湖山样区生物量与地面实测生物量的相关性R2达0.81,生物量RMSE为40.85 t/ha,说明机载LiDAR点云数据的高度和密度统计量与生物量存在较高的相关性。以机载LiDAR数据估算的生物量为样本数据,结合多光谱遥感数据Landsat8 OLI估算粤西北地区的森林地上生物量,精度验证结果为:R2为0.58,RMSE为36.9 t/ha;针叶林、阔叶林和针阔叶混交林等3种不同森林类型生物量的估算结果为:R2分别为0.51(n=251)、0.58(n=235)和0.56(n=241),生物量RMSE分别为24.1 t/ha、31.3 t/ha和29.9 t/ha,估算精度相差不大。总体上看,利用遥感数据可以开展区域尺度的森林地上生物量估算,为森林固碳监测提供有力的参考数据。 相似文献
16.
Varghese Ouseph Alappat Ashok Kumar Joshi Y. V. N. Krishnamurthy 《Journal of the Indian Society of Remote Sensing》2011,39(4):583-589
Optical remote sensing data have been extensively used to derive biophysical properties that relate forest type and composition.
However, stand density, stand height and stand volume cannot be estimated directly from optical remote sensing data owing
to poor sensitivity between these parameters and spectral reflectance. The ability of microwave energy to penetrate within
forest vegetation makes it possible to extract information on both the crown and trunk components from radar data. The type
of polarization employed determines the radar response to the various shapes and orientations of the scattering mechanisms
within the canopy or trunk. This study mainly presents experimental results obtained with airborne E-SAR using polarimetric
C and L bands over the tropical dry deciduous forest of Chandrapur Forest Division, Maharashtra. A detailed documentation
of the relationship between SAR C & L bands backscattering and forest stand variables has been provided in the present study
through linear correlation. Linear correlation of the single channel SAR derived estimates with the field measured means show
a good correlation between L HV backscattering coefficient with stand volume (r2 = 0.71) and L HH backscattering coefficient with stand density (r2 = 0.75). The results imply that SAR data has significant potential for stand menstruation in operational forestry. 相似文献
17.
激光雷达森林参数反演研究进展 总被引：6，自引：0，他引：6
激光雷达通过发射激光能量和接收返回信号的方式,来获取高精度的森林空间结构和林下地形信息。全波形激光雷达通过记录返回信号的全部能量,得到亚米级植被垂直剖面;离散回波激光雷达记录的单个或多个回波,表示来自不同冠层的回波信号。星载激光雷达一般采用全波形或光子计数激光剖面系统,仅能获取卫星轨道下方的单波束或多波束数据,用于区域/全球范围的森林垂直结构及变化观测。机载激光雷达多采用离散回波或全波形激光扫描系统,能够获取飞行轨迹下方特定视场范围内的扫描数据,用于林分/区域范围的森林结构观测。地基激光雷达多采用离散回波激光扫描系统,获取以测站为中心的球形空间内扫描数据,用于单木/样地范围的森林结构观测。激光雷达单木因子估测方法可分为CHM单木法、NPC单木法和体元单木法3类。CHM单木法通过局部最大值识别树冠顶点,采用区域生长或图像分割算法识别树冠边界或树冠主方向,NPC单木法一般通过空间聚类或形态学算法识别单木,体元单木法在3维体元空间采用区域生长或空间聚类算法识别树冠。根据激光雷达冠层高度分布可以估测林分因子,冠层高度分布特征来自于离散点云或全波形。多时相激光雷达可用于森林生长量、生物量变化等监测,以及森林采伐、灾害等引起的结构变化监测。随着激光雷达技术的发展,它将在森林调查、生态环境建模等生产与科学研究领域中得到更为广泛的应用。 相似文献
18.
Carlos Alberto Silva Andrew Thomas Hudak Carine Klauberg Lee Alexandre Vierling Carlos Gonzalez-Benecke Samuel de Padua Chaves Carvalho Luiz Carlos Estraviz Rodriguez Adrián Cardil 《Carbon balance and management》2017,12(1):13
Background
LiDAR remote sensing is a rapidly evolving technology for quantifying a variety of forest attributes, including aboveground carbon (AGC). Pulse density influences the acquisition cost of LiDAR, and grid cell size influences AGC prediction using plot-based methods; however, little work has evaluated the effects of LiDAR pulse density and cell size for predicting and mapping AGC in fast-growing Eucalyptus forest plantations. The aim of this study was to evaluate the effect of LiDAR pulse density and grid cell size on AGC prediction accuracy at plot and stand-levels using airborne LiDAR and field data. We used the Random Forest (RF) machine learning algorithm to model AGC using LiDAR-derived metrics from LiDAR collections of 5 and 10 pulses m?2 (RF5 and RF10) and grid cell sizes of 5, 10, 15 and 20 m.Results
The results show that LiDAR pulse density of 5 pulses m?2 provides metrics with similar prediction accuracy for AGC as when using a dataset with 10 pulses m?2 in these fast-growing plantations. Relative root mean square errors (RMSEs) for the RF5 and RF10 were 6.14 and 6.01%, respectively. Equivalence tests showed that the predicted AGC from the training and validation models were equivalent to the observed AGC measurements. The grid cell sizes for mapping ranging from 5 to 20 also did not significantly affect the prediction accuracy of AGC at stand level in this system.Conclusion
LiDAR measurements can be used to predict and map AGC across variable-age Eucalyptus plantations with adequate levels of precision and accuracy using 5 pulses m?2 and a grid cell size of 5 m. The promising results for AGC modeling in this study will allow for greater confidence in comparing AGC estimates with varying LiDAR sampling densities for Eucalyptus plantations and assist in decision making towards more cost effective and efficient forest inventory.19.
Jose A. Manzanera Antonio García-Abril Cristina Pascual Rosario Tejera Susana Martín-Fernández Timo Tokola 《地理信息系统科学与遥感》2016,53(6):723-738
Forest stand structure is an important concept for ecology and planning in sustainable forest management. In this article, we consider that the incorporation of complementary multispectral information from optical sensors to Light Detection and Ranging (LiDAR) may be advantageous, especially through data fusion by back-projecting the LiDAR points onto the multispectral image. A multivariate data set of both LiDAR and multispectral metrics was related with a multivariate data set of stand structural variables measured in a Scots pine forest through canonical correlation analysis (CCA). Four statistically significant pairs of canonical variables were found, which explained 83.0% accumulated variance. The first pair of canonical variables related indicators of stand development, i.e. height and volume, with LiDAR height metrics. CCA also found attributes describing stand density to be related to LiDAR and spectral variables determining canopy coverage. Other canonical variables pertained to Lorenz curve-derived attributes, which are measures of within-stand tree size variability and heterogeneity, able to discriminate even-sized from uneven-sized stands. The most relevant result was to find that metrics derived from the multispectral sensor showed significant explanatory potential for the prediction of these structural attributes. Therefore, we concluded that metrics derived from the optical sensor have potential for complementing the information from the LiDAR sensor in describing structural properties of forest stands. We recommend the use of back-projecting for jointly exploiting the synergies of both sensors using similar types of metrics as they are customary in forestry applications of LiDAR. 相似文献
20.
Forest canopy height is an important indicator of forest carbon storage, productivity, and biodiversity. The present study showed the first attempt to develop a machine-learning workflow to map the spatial pattern of the forest canopy height in a mountainous region in the northeast China by coupling the recently available canopy height (Hcanopy) footprint product from ICESat-2 with the Sentinel-1 and Sentinel-2 satellite data. The ICESat-2 Hcanopy was initially validated by the high-resolution canopy height from airborne LiDAR data at different spatial scales. Performance comparisons were conducted between two machine-learning models – deep learning (DL) model and random forest (RF) model, and between the Sentinel and Landsat-8 satellites. Results showed that the ICESat-2 Hcanopy showed the highest correlation with the airborne LiDAR canopy height at a spatial scale of 250 m with a Pearson’s correlation coefficient (R) of 0.82 and a mean bias of -1.46 m, providing important evidence on the reliability of the ICESat-2 vegetation height product from the case in China’s forest. Both DL and RF models obtained satisfactory accuracy on the upscaling of ICESat-2 Hcanopy assisted by Sentinel satellite co-variables with an R-value between the observed and predicted Hcanopy equalling 0.78 and 0.68, respectively. Compared to Sentinel satellites, Landsat-8 showed relatively weaker performance in Hcanopy prediction, suggesting that the addition of the backscattering coefficients from Sentinel-1 and the red-edge related variables from Sentinel-2 could positively contribute to the prediction of forest canopy height. To our knowledge, few studies have demonstrated large-scale vegetation height mapping in a resolution ≤ 250 m based on the newly available satellites (ICESat-2, Sentinel-1 and Sentinel-2) and DL regression model, particularly in the forest areas in China. Thus, the present work provided a timely and important supplementary to the applications of these new earth observation tools. 相似文献