共查询到20条相似文献,搜索用时 328 毫秒
1.
2.
本文介绍了测绘科学研究所研制的重力数据库中存储的平均空间重力异常的计算方法。并分析了不同格网(5′×5′,15′×15′,30′×30′等)平均重力异常的精度。选取北纬25°~32°,东经100°~107°作为试验区进行了研究。计算证明,利用参数拟合法,在我国一般地区,可以求得优于±10毫伽的5′×5′以上格网的平均空间异常。特殊困难地区,经特殊处理后可以求得优于±10毫伽的15′×15′以上格网的平均空间异常。 相似文献
3.
本文提出用间隔三差相位模型处理GPS观测数据,整体平差GPS网。阐述了基本模型和数据处理方法。用以此模型和方法为基础编写的软件SOSDS处理了1991年5月至1992年4月观测的分布在全国范围的53个点的GPS网数据。结果显示出,基线精度为2×10-8;基线向量的单弧解算精度为40cm(N)、93cm(E)和106cm(U);点位坐标的相对精度为3×10〔-8〕。 相似文献
4.
采用地球重力场模型 ,考虑区域重力异常和地形改正 ,建立了西藏墨脱地区 1′× 1′似大地水准面模型。实际检测结果表明 ,该似大地水准面模型相对精度达到了± 0 .0 2 5m ,可代替几何水准测量 ,满足该地区工程建设的要求。 相似文献
5.
本文提出了处理卫星重力梯度数据以确定高分辩力重力场模型的单层位法并对其中的独立估计法进行了误差分析,数字结果显示:当卫星高度为200km,卫星数据网格宽度为15′,卫星重力梯度数据的精度为2×10~(-3)E时,利用独立估计法可得到分辩力为1°×1°(100km)的全球重力场模型,其重力异常精度小于1(mgal);若卫星高度降至160km,卫星重力梯度数据的精度达到3×10~(-4)E,则获得的重力场模型的分辩力可提高到0.5°×0.5°(50km),其重力异常精度仍小于1(mgal)。 相似文献
6.
局部重力异常协方差函数逼近 总被引:7,自引:0,他引:7
本文基于中国某地区密集均匀分布(2km×2km一点)的实测重力异常,统计了110km×120km范围内空间重力异常和地形高的局部协方差函数,并应用回归分析方法,以地形高的局部协方差函数,对重力异常的局部协方差函数实施逼近。统计结果表明,逼近公式(6)和(7)的逼近精度分别为±17.36(mgal) ̄2和±4.85(mgal) ̄2。 相似文献
7.
8.
川西地区地势复杂,进行常规测绘工作很艰难。若采用GPS作为1:5万航测图的控制,既可以减轻大地测量工作的困难,也有很好的经济效益。但在高程方面,必须将GPS测定的大地高转换为正常高。如此需有高分辨率的似大地水准面。本文用平面近似的Stokes公式,并顾及Molodensky一阶项,用FFT计算了Δφ=14°Δλ=12°川西地区5′×5′的似大地水准面,结果与该区的天文重力水准及GPS水准比较,精度约为±1米,并认为顾及剩余重力异常较单纯用位系数模型的结果精度高20%。此外,还认为用0.5′×0.5′的DTM,再顾及Molodensky一阶项,精度还可提高20%。 相似文献
9.
Vening—Meinesz公式的球面卷积形式 总被引:4,自引:0,他引:4
过去利用快速Fourier变换(FFT)或快速Hartley变换(FHT)技术计算垂线偏差是假设地球是一个平面。在此基础上导出的Vening-Meinesz公式平面卷积形式虽然在一定精度范围内可以满足要求,但会产生较大的近似误差。然而,Vening-Meinesz公式同样可以发展为由FHT技术计算的二维球面卷积公式。数值计算表明:在Δ(?)=10°,Δλ=13°(5′×5′平均重力异常)范围内,Vening-Meinesz球面卷积公式的计算结果与数值积分结果的均方差m_ξ=±0.03秒、m_η=±0.02秒,比平面卷积公式的计算结果与数值积分结果的均方差m_ξ=±0.14秒、m_η=±0.30秒有显著提高。 相似文献
10.
开发高精度的实时GPS动态定位技术是近几年的热门课题,基于GPS码的差分定位(DGPS)的现已达到3~5m的精度,而基于载波平滑码的差分定位也已达到1~3m的实时精度,尽管如此,这些结果仍不能满足许多高精度用户的要求,这就促使运动中载波相位模糊度解法(简称OTF算法,它是实现cm级GPS动态定位的关键)的研究近几年取得突破出进展。本文首先评述了已有的几种OTF算法,提出了一种新的利用GPS载波相位 相似文献
11.
用重力异常逐级余差计算重力大地水准面 总被引:1,自引:0,他引:1
本文将计算重力大地水准面的频域方法推广至空域,提出了一种新的用重力数据和重力模型位系数联合确定大地水准面的方法。利用重力异常的逐级余差实施积分,使得通常的Stokes积分方法具有明确的频域分析含义,可按精度要求确定出使用重力异常余差的块形大小及积分半径ψo。 相似文献
12.
Ye. P. Sorokina 《地理信息系统科学与遥感》2013,50(2):165-176
Industry concentrated in cities is a major source of geochemical pollution. It is suggested that this technogenic impact on the environment can be measured by techniques developed in geochemistry. The specific nature of the pollutants can be identified and their levels of concentration (mostly in the soil) can be measured against normal background values. This allows areas of pollution to be classified and mapped in terms of the composition and concentration of pollutants from industrial emissions. Translated from: Voprosy geografii, Vol. 120, 1983, pp. 55-67, by Robert K. Holz and Warren Hamill, University of Texas, Austin. 相似文献
13.
利用MAGSAT卫星数据研究青藏高原及其邻近地区磁异常 总被引:6,自引:0,他引:6
使用43792个MAGSAT卫星磁测数据,编绘青藏高原及邻近地区卫星标量和矢量磁异常图。为了提取岩石层卫星磁异常,首先对MAGSAT卫星数据进行了筛选,然后进行主磁场,磁层场,电离层场和感应场改正。 相似文献
14.
15.
I. A. Avessalomova 《地理信息系统科学与遥感》2013,50(2):134-141
A method is proposed for the use of large-scale “landscape-functional” maps (depicting interrelationships between landscape structure, land use, and environmental impacts) in the identification and explanation of geochemical anomalies within urbanized areas. Landscape-functional complexes or basic elementary landscapes located within different zones of human activity, serve as the basic units of mapping. An excerpt from a landscape-functional map of an unnamed mining-metallurgical center in a semi-arid mountain basin environment is provided as an illustration of how such maps reveal spatial associations between trace-element concentrations in soil, snow, and stream bottom sediments; location in respect to major pollution sources (proximity, upslope or downslope position, leeward or windward orientation); and frequency and intensity of trace-element transport (mass movements, stream and overland flow, prevailing winds). Translated from: Vestnik Moskovskogo Universitete, geografiya, 1986, No. 5, pp. 88-94. 相似文献
16.
17.
18.
19.
矿源场-成矿节-遥感信息异常找矿模式法 总被引:3,自引:0,他引:3
介绍了矿源场-成矿节-遥感信息异常找矿模式方法的技术思路及应用方法,提出矿源场的3种类型、成矿节的3种形式及遥感找矿信息异常的二分法。该方法在实际应用中效果明显 相似文献
20.
《测量评论》2013,45(65):131-134
Abstract1. In geodetic work a ‘Laplace Point’ connotes a place where both longitude and azimuth have been observed astronomically. Geodetic surveys emanate from an “origin” O, whose coordinates are derived from astronomical observations: and positions of any other points embraced by the survey can be calculated on the basis of an assumed figure of reference which in practice is a spheroid formed by the revolution of an ellipse about its minor axis. The coordinates (latitude = ?, longitude = λ and azimuth = A) so computed are designated “geodetic”. 相似文献