首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Clogging effect, as a new concept in geological engineering, is a phenomenon of permeability decreasing under seeping in reservoir dam foundation of the alluvial and diluvial deposits with deep and thick layer, coarse particle and high permeability in mountains-gully rivers of Tibetan Plateau. A clogging infiltration instrument has been designed successfully and a series of simulation tests have been done. Based on large amounts of data, it is confirmed that the existence of the clogging effect and the law of infiltration clogging is found out. Three indexes are proposed such as "optimal size of particle", "optimal size range of particle" and "characteristic pore", which are closely related with effect of infiltration clogging. The concept and results can offer a new idea to solve problems on anti-seepage of dam foundation in mountains-gully rivers environment and to study artificial clogging, meanwhile supplement of the concept of seepage deformation.  相似文献   

2.
Clogging effect, as a new concept in geological engineering, is a phenomenon of permeability decreasing under seeping in reservoir dam foundation of the alluvial and diluvial deposits with deep and thick layer, coarse particle and high permeability in mountains-gully rivers of Tibetan Plateau. A clogging infiltration instrument has been designed successfully and a series of simulation tests have been done. Based on large amounts of data, it is confirmed that the existence of the clogging effect and the law of infiltration clogging is found out. Three indexes are proposed such as ＂optimal size of particle＂, ＂optimal size range of particle＂ and ＂characteristic pore＂, which are closely related with effect of infiltration clogging. The concept and results can offer a new idea to solve problems on anti-seepage of dam foundation in mountains-gully rivers environment and to study artificial clogging, meanwhile supplement of the concept of seepage deformation.  相似文献   

3.
The three-dimensional seepage simulation test device for siltation dam foundation soil is a multifunctional penetration instrument which is designed for the simulation of infiltration clogging,seepage damage,and dam seepage and so on. This device is different from the traditional instruments for the rock and soil permeability. In order to verify the practicability of the device,the authors collected the soil samples for laboratory penetration test,observed the seepage damage phenomenon,and obtained the dynamic change curve of permeability coefficient and isopotential map of water pressure. At the same time,the Geostudio finite element software is used to simulate the steady seepage of the test device. By contrast of the isopotential maps between simulation and actual water pressures,it is found that they are approximately the same. It is proved that the test data of the device is scientific and reliable,reaching the results of the test and design purposes. The instrument can be used in many aspects of experimental study on soil seepage.  相似文献   

4.
工程建设改变地下水流场危及建筑物的安全。以济南经十路沿线大型地下综合体为例, 通过数值模拟计算工程建设对地下水渗流场的影响, 并建立了地下水流场修复模型。结果表明: 地下空间结构会阻挡地下水运移, 地下水水位壅高造成地基承载力降低; 将地下工程设置导流措施后, 其迎水面水位随时间呈现衰减趋势, 且越接近天然状态水位衰减速率越慢; 因地层结构差异, 壅高水位基本回落的时间存在较大差异; 不同地质条件下流场修复所需导流井数量与导流几何体结构参数呈负相关关系, 所需导流井数量的预测方程反映了地质条件的复杂性和多变性。除导流几何体自身结构外, 围岩水力梯度与渗透系数对导水能力产生影响, 其中渗透系数大小制约导水速率的快慢, 水力梯度则控制导水行为的发生。导流措施的实施可减小工程建设对地下水环境的影响, 确保地下工程建设对水环境影响可控。   相似文献   

5.
This article reports a particle image velocimetry study and the comparative results of a numerical simulation into the hydrodynamic characteristics around an artificial reef.We reveal the process of flow separation and vortex evolution,and compare the force terms generated by our artificial reef model.The numerical simulation agrees well with experimental results,showing the applicability of computational fluid dynamics to the hydrodynamics of an artificial reef.Furthermore,we numerically simulate the hydrodynamics of the reef model for seven velocities.The results show that the drag coefficient is approximately 1.21 in a self-modeling region for Reynolds numbers between 2.123×104and 9×104.Therefore,the upwelling height and current width of the flow field do not change significantly when the inflow velocity increases.Our study indicates that computational fluid dynamics can be applied to study the hydrodynamics of an artificial reef and offer clues to its construction.  相似文献   

6.
速度倒数法(INV)是基于坡表变形特征的滑坡启滑预测工具, 其与滑坡内部多物理场演化的关系仍需进一步明晰。开展了甘肃省舟曲县立节北山滑坡的勘察与坡表变形监测, 采用基于速度倒数法、速度阈值法、以非饱和土理论为基础的边坡降雨响应模拟3种方法, 对该滑坡的运动特征与失稳的内在机制展开了研究。研究结果表明: 边坡变形速度倒数-时间曲线有明显的加速起始点。速度倒数在2021年6月3日达到最低值后, 进入约60 d的平稳期, 在9月20日突然加速, 并在20 d内速度达到200 mm/d以上, 变形不再收敛。基于速度倒数法得到的滑坡生命周期结束点, 与实际的失稳点相差8 d, 提前约130 d对该突发性滑坡进行了预报。根据全过程速度时程曲线, 存在20, 60, 100 mm/d的多级速度阈值。边坡应力场、变形场、渗流场的数值模拟结果显示, 变形时程曲线的拐点与降雨强度的增加相关, 累计降雨量与安全系数呈指数负相关。数值模拟得到的累计变形为2 250 mm, 变形速度为10~35 mm/d, 速度倒数为0.03~0.12 d/mm, 与实际监测数据接近。综上所述, 速度倒数法对立节北山滑坡的生命周期进行了有效预测, 基于速度的预警阈值受长时序变形时程曲线波动的影响, 采用以非饱和土理论为基础的数值模拟明晰了立节北山滑坡变形对降雨的响应机制。   相似文献   

7.
帷幕结合基坑内降水的方案是深基坑工程中地下水控制的主要趋势,由于基坑渗流场的复杂性和尺度效应,业内尚无成熟且精确的解析计算方法。在分析悬挂式帷幕基坑与闸坝渗流场特点异同的基础上,对闸坝改进阻力系数法进行修正,提出了承压水条件下悬挂式帷幕基坑渗流段的分段方式,推导了新的考虑基坑特殊段"水平汇流段"的等效阻力系数计算公式,并将之拓展至含水层各向异性条件下,实现了悬挂式帷幕基坑涌水量和坑外水位降深的定量计算;最后,结合典型基坑案例,通过数值模拟验证了该方法的精确性。研究表明:经过合理分段、等效和修正处理后,改进阻力系数法在悬挂式帷幕基坑承压水渗流计算中,与数值法计算结果的相对误差能控制在5%以内,精度较高,且具有分段灵活、计算简单的优点,能适用于不同场地条件下基坑降水设计的计算。   相似文献   

8.
A large amount of loose debris materials were deposited on the slope of mountainous areas after the 2008 Ms 8.0 Wenchuan earthquake. During and after the earthquake, these loose debris deposits collapsed and slide into valleys or rivers, changing river sediment supply condition and channel morphology. To investigate the mechanisms of granular flow and deposition, the dynamics of slope failure and sediment transportation in typical mountainous rivers of different intersection angles were analyzed with a coupling model of Computational Fluid Dynamics and Discrete Element Method(CFD-DEM). The numerical results show that the change of intersection angle between the granular flow flume and the river channel can affect the deposit geometry and the fluid flow field significantly. As the intersection angle increases, the granular velocity perpendicular to the river channel increases, while the granular velocity parallel to the river channel decreases gradually. Compared to the test of dry granular flow, the CFD-DEM coupling tests show much higher granular velocity and larger volume of sediments entrained in the river. Due to the river flow, particles located at the edge of the deposition will move downstream gradually and the main section of sediments deposition moves from the center to the edge of the river channel. As a result, sediment supply in the downstream river will distribute unevenly. Under the erosion of fluid flow, the proportion of fine particles increases, while the proportion of coarse particles decreases gradually in the sediment deposition. The build-up of accumulated sediment mass will cause a significant increase in water level in the river channel, thus creating serious flooding hazard in mountainous rivers.  相似文献   

9.
Drilling fluid is a common flushingmedium used in pile foundation, geological drilling and petroleum drilling. Study on ultrasonic propagation properties in drilling fluid is of vital importance, not only for developing equipments to non-contact measuring concrete casting level for bored pile, but also for developing equipments considering drilling fluid as signal channel. The existence of clay particlesmakes the ultrasonic propagation and attenuation in drilling fluid much different from pure water. In order to know the relation among ultrasound frequency, slurry density and depth, a series of laboratory experiments about ultrasound propagation in water-based bentonite slurry were finished. Wavelet method was adopted to process the gained original waves of ultrasonic propagation in slurry, so we knew the velocity and attenuation coefficient of ultrasound propagated in different drilling fluids with different density. The first group experiments shows that with density of drilling fluid increase, ultrasonic velocity will decrease but attenuation coefficient will increase if ultrasonic frequency keep constant. The second group experiments shows that the power of ultrasound will intensify in small bore hole, the attenuation coefficient ismuch smaller than theoretical value.  相似文献   

10.
The lateral distributions of depth-averaged velocity in open compound channels with emerged and submerged vegetated floodplains were analyzed based on the analytical solution of the depth-integrated Reynolds-Averaged Navier-Stokes equation with a term to account for the effects of vegetation. The three cases considered for open channels were two-stage rectangular channel with emerged vegetated floodplain, rectangular channel with submerged vegetated corner, and two-stage rectangular channel with submerged vegetated floodplain, respectively. To predict the depth-averaged velocity with submerged vegetated floodplains, we proposed a new method based on a two-layer approach where flow above and through the vegetation layer was described separately. Moreover, further experiments in the two-stage rectangular channel with submerged vegetated floodplain were carried out to verify the results. The analytical solutions of the cases indicated that the corresponding analytical depth-averaged velocity distributions agree well with the simulated and experimental prediction. The analytical solutions of the cases with theoretical foundation and without programming calculation were reasonable and applicable, which were more convenient than numerical simulations. The analytical solutions provided a way for future researches to solve the problems of submerged vegetation and discontinuous phenomenon of depth-averaged velocity at the stage point for compound channels. Understanding the hydraulics of flow in compound channels with vegetated floodplains is very important for supporting the management of fluvial processes.  相似文献   

11.
粘性土的透水性首先取决于孔隙的大小,其次是孔隙的多少。本文在对洛川塬黄土地层进行水银测孔试验和渗透试验的基础上,用曲线图分析法及逐步回归分析法对自变量进行筛选,找出了黄土地层透水的最小孔径大于5μm,并以此推算出黄土地层中结合水的厚度约是水分子直径的9000倍。文中还建立了描述渗透系数与透水孔隙孔容关系的随机数学模型,开辟了一条通过水银测孔取得粘性土渗透系数值的新途径。  相似文献   

12.
针对传统海浪建模方法中存在海洋表面真实感差、计算复杂的问题,本文进行了基于光滑粒子流体动力学算法（SPH）与移动立方体算法（MC）相结合的海浪建模仿真研究。通过基于空间网格的粒子分配,建立了粒子群单向列表存储结构,在海浪粒子物理量计算时,实现了其光滑核半径内粒子群的快速检索,并基于拉格朗日流体控制方程,进行了海浪粒子受力分析及状态计算;在模拟海浪与环境障碍物碰撞时,将碰撞问题简化为粒子在一定时间段内所经过的路径与障碍物表面三角面片是否相交来进行判定,并假设粒子为理想刚体,采用改进的欧拉方法实现了粒子新位置的动态计算;为增强海浪流体模拟的真实感,在移动立方体节点密度动态计算基础上,依据确定的海浪表面密度阈值,耦合MC算法进行了海浪表面的动态提取,从而实现了海浪三维表面建模与动态演变仿真。通过模拟验证了该算法的时效性与可行性,可为海洋环境信息三维可视化提供一定的参考。  相似文献   

13.
The Niumiangou landslide was the largest landslide triggered by the 2008 Wenchuan earthquake, which was significantly affected by the amplification effect of seismic acceleration. The ringshear experiments indicated that the materials in the source area of the Niumiangou landslide were subjected to friction degradation under a big shear displacement, which may result in rapid movement of the landslide. In order to better understand the landslide movement and study the effect of the friction degradation on movement mechanisms, the dynamic process of Niumiangou landslide was simulated with a new numerical method, which combines the finite difference method(FDM) and the discontinuous deformation analysis(DDA). First, the FDM was used to study the initiation time, amplification effect and velocity of the landslide. Afterwards, these initiation velocities were applied to the blocks in the DDA model by corresponding coordination in the FDM model. A displacementdependent friction model of the sliding surface was incorporated into DDA code to further understand the kinetic behavior of the landslide. The results show that the displacement-dependent friction strongly decreases the friction coefficient of sliding surface under a big displacement, which can obviously promote the run-out and velocity of landslide. The model output well matches the topographic map formed by the landslide. This implies that the proposed model can be applied to the simulation of earthquake-induced landslides with amplification effect, and the friction degradation model is important to clarify the movement mechanism of high-speed and long-distance landslides.  相似文献   

14.
To improve the efficiency of a CycloBio fluidized sand bed(CB FSB) in removal of dissolved wastes in recirculating aquaculture systems, the hydrodynamics of solid-liquid flow was investigated using computational fluid dynamics(CFD) modeling tools. The dynamic characteristics of silica sand within the CB FSB were determined using three-dimensional, unsteady-state simulations with the granular Eulerian multiphase approach and the RNG k-ε turbulence model, and the simulation results were validated using available lab-scale measurements. The bed expansion of CB FSB increased with the increase in water inflow rate in numerical simulations. Upon validation, the simulation involving 0.55 mm particles, the Gidaspow correlation for drag coefficient model and the Syamlal-O'Brien correlation for kinetic granular viscosity showed the closest match to the experimental results. The volume fraction of numerical simulations peaked as the wall was approached. The hydrodynamics of a pilot-scale CB FSB was simulated in order to predict the range of water flow to avoid the silica sand overflowing. The numerical simulations were in agreement with the experimental results qualitatively and quantitatively, and thus can be used to study the hydrodynamics of solid-liquid multiphase flow in CB FSB, which is of importance to the design, optimization, and amplification of CB FSBs.  相似文献   

15.
湖水与地下水交互作用对于水资源合理开发与利用有着重要意义。基于温度示踪的原理，采用解析法、数值法2种方法，分析了湖床底部埋深0~0.4 m湖水与浅层地下水交互关系，并与水动力学方法进行了对比。结果表明，2018年5月20日至28日，湖水与地下水之间的垂向渗流速度为2×10-7~1×10-6 m/s，且在埋深0.4 m时大于埋深0.2 m处。降水会对解析法的结果造成一定影响，0.4 m处受到降雨影响表现为一定的滞后性。无降雨干扰情况下，数值法与水动力学方法估算结果较为吻合，且3种方法的计算结果处于同一数量级。同时，湖床沉积物体积热容和孔隙度2种参数对计算结果影响较大。在半干旱地区湖水与地下水交互研究中，数据较完备时，数值模拟法是更好的选择。   相似文献   

16.
Water-rock flow is a kind of debris flow with more coarse particles and low viscosity, which occurs in many areas of the world. In this work, the water-rock flow that occurred on May 24, 2010, at Nanfen's open-pit mine of China was investigated by combining field investigation, meteorological and hydrological survey with numerical simulation to understand its triggering mechanism and dynamic process. The field data shows that the short-term high-intensity rainfall is the most direct inducement to trigger water-rock flow in the waste dump. The loose shallow gravel soil and the V-shaped valley with a certain slope provide the necessary conditions of the occurrence of water-rock flow in the waste dump. Moreover, the possibility criterion of water-rock flow is presented by analyzing the historical rainfall data. In addition, the smoothed particle hydrodynamics(SPH) method was employed to simulate the waterrock flow under the conditions of Newtonian fluid with uniform distribution of water and coarse-grained materials. The simulating results show that the flow distance, velocity, shape, and deposition profile of water-rock flow are in good agreement with the field observation. The present work is beneficial to the risk assessment and mitigation design of water-rock flow disaster in the waste dump.  相似文献   

17.
This paper presents a study on drag coefficients under typhoon wind forcing based on observations and numerical experiments. The friction velocity and wind speed are measured at a marine observation platform in the South China Sea. Three typhoons: SOULIK(2013), TRAMI(2013) and FITOW(2013) are observed at a buoy station in the northeast sea area of Pingtan Island. A new parameterization is formulated for the wind drag coefficient as a function of wind speed. It is found that the drag coefficient(Cd) increases linearly with the slope of 0.083′10~(-3) for wind speed less than 24 m s~(-1). To investigate the drag coefficient under higher wind conditions, three numerical experiments are implemented for these three typhoons using SWAN wave model. The wind input data are objective reanalysis datasets, which are assimilated with many sources and provided every six hours with the resolution of 0.125?×0.125?. The numerical simulation results show a good agreement with wave observation data under typhoon wind forcing. The results indicate that the drag coefficient levels off with the linear slope of 0.012′10~(-3) for higher wind speeds(less than 34 m s~(-1)) and the new parameterization improvese the simulation accuracy compared with the Wu(1982) default used in SWAN.  相似文献   

18.
It is important to quantify the effect of the root diameter, the embedment length of the root and load speed on the soil-root interface mechanical properties for studying the root anchorage. The soilroot interface mechanical properties can be obtained through the pullout force and root slippage curve(F-S curve). About 120 Pinus tabulaeformis single roots whose diameters ranged from 1 mm to 10 mm divided into 6 groups based on different root embedment length(50 mm, 100 mm and 150 mm) and different load velocity(10 mm·min~(-1), 50 mm·min~(-1), 100 mm·min~(-1) and 300 mm·min~(-1)) were investigated using the pullout method. This study aims to explore the mechanical properties of the soil-root interface in the real conditions using the pullout test method. The results showed two kinds of pullout test failure modes during the experimental process: breakage failure and pullout failure. The results showed that the roots were easier to be broken when the root diameter was smaller or the loading speed was larger. The relationship between the maximum anchorage force and root diameter was linear and the linearly dependent coefficient(R~2) was larger than 0.85. The anchorage force increased with the root embedment length. An increase of 10%~(-1)5% for the maximumanchorage force was found when load speed increased from 10 to 300 mm.min~(-1). The mean peak slippage of the root was from 13.81 to 35.79 mm when the load velocity varied from 10 to 300 mm.min~(-1). The study will be helpful for the design of slopes reinforced by vegetation and in predicting risk of uprooting of trees, and will have practical benefits for understanding the mechanism of landslide.  相似文献   

19.
Three-stranded rope is widely used in fishing gear and mooring system. Results of numerical simulation are presented for flow around a three-stranded rope in uniform flow. The simulation was carried out to study the hydrodynamic characteristics of pressure and velocity fields of steady incompressible laminar and turbulent wakes behind a three-stranded rope. A three-cylinder configuration and single circular cylinder configuration are used to model the three-stranded rope in the two-dimensional simulation. The governing equations, Navier-Stokes equations, are solved by using two-dimensional finite volume method. The turbulence flow is simulated using Standard κ-ε model and Shear-Stress Transport κ-ω(SST) model. The drag of the three-cylinder model and single cylinder model is calculated for different Reynolds numbers by using control volume analysis method. The pressure coefficient is also calculated for the turbulent model and laminar model based on the control surface method. From the comparison of the drag coefficient and the pressure of the single cylinder and three-cylinder models, it is found that the drag coefficients of the three-cylinder model are generally 1.3–1.5 times those of the single circular cylinder for different Reynolds numbers. Comparing the numerical results with water tank test data, the results of the three-cylinder model are closer to the experiment results than the single cylinder model results.  相似文献   

20.
本文根据流体动力弥散理论,按地下水中溶质局部质量守恒原理,采用非线性基函数,对单元内的渗透速度和弥散系数作了平均化近似处理,导出了求解流体动力弥散问题的另一种新的数值法——等参数溶质质量均衡近似有限元法。与作者在文献〔1〕中给出的较精确的算法相比,虽不甚精细,但计算工作量大为减小,并保持了文献〔1〕中方法的主要优点,比较简便易行。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号